750VA-1600VA UPS

The APC BVX900LI Easy-UPS provides dependable power protection for your essential electronics during voltage fluctuations or unexpected outages. Designed with simplicity and reliability in mind, this UPS ensures stable operation for home and office devices through its four IEC C13 outlets and convenient IEC C14 input connection.

Key Features of APC BVX900LI Easy-UPS Automatic Voltage Regulation (AVR) maintains safe voltage levels by adjusting under and overvoltages without draining the battery.
Access monitoring allows detection of unauthorized entry via door switch integration.
Provides reliable battery backup to keep connected devices powered during outages or surges.
Specification Output Power Capacity: 480 Watts / 900VA

Output Connections: (4) IEC 320 C13 (Battery Backup)

Nominal Output Voltage: 230V

Nominal Input Voltage: 230V

Input Connections: IEC 60320 C14

Cord Length: 1.2 Metres

Manageability LED Indicators: Easy-to-read visual indicators display the UPS status and utility power conditions clearly.

Audible Alarms: Audible notifications alert users to changes in utility and UPS power states.

Protection Battery and Surge Protected Outlets: Safeguard equipment and data from power surges, spikes, and outages.

Battery Backup and Surge Protection: Extends runtime for essential low-power devices, maintaining network connectivity during extended power loss.

Safety Safety-Agency Approved: Verified to operate safely with various connected equipment and within specified environmental standards.

Features Cold-Start Capable: Enables temporary battery operation during complete power loss.

Boost AVR: Preserves battery life and enhances performance by correcting low voltages without discharging the battery.

Transformer-Block Spaced Outlets: Accommodates large plugs without blocking additional outlets.

Sleek Design: Slim, modern construction allows upright, flat, or wall-mounted installation to match any setup.

Availability Advanced Safety Features: Protects against overloads, high voltages, short circuits, and battery damage from low voltage conditions.

Intelligent Battery Management: Enhances battery life and reliability with smart charging technology.

Battery Failure Notification: Provides early detection and alerts for proactive battery maintenance.

Battery Options for this Product APC Replacement Battery Cartridge - RBC17

This APC Replacement Battery Cartridge fits selected APC Smart-UPS and Back-UPS, restoring power back-up capacity for home offices, small businesses, and IT departments.

This replacement battery cartridge (RBC) has a lifetime of three to five years, offers safe and reliable support to the UPS, and extends the useful life of your UPS. The APC RBC comes fully assembled and includes easy-to-follow replacement instructions, making hot-swap installation simple. Purchase Replacement Battery Cartridge *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

CyberPower UT1050EIG guarantees power protection for computers, networking equipment, and storage devices. The product adopts line-interactive topology with Automatic Voltage Regulation (AVR) function to offer stabilized AC power output. The patented GreenPower UPS™ Bypass design achieves ultra-low power consumption to reduce energy costs, and allows a lower operation temperature which extends battery lifespan.

The LED indicator shows the utility, battery and operating status of the UPS. It is also compatible with generators to extend power continuity. Other features include overload protection, EMI filter and configurable alarm to safeguard your devices. Its tower design allows users to place it easily on desks or other tight spaces.

Specifications

VA Watts Output Voltage (Vac) Runtime at 90W (min) Outlets 1050 630 230 ± 10% 43 IEC C13 x 6 Main Features

Energy Saving Technology

Automatic Voltage Regulation (AVR)

  Generator Compatible

LED Status Indicator

  Overload Protection

Phone/Fax/Modem/DSL/Network Protection

USB Connectivity Port

Configurable Alarm

Surge and Spike Protection

High-speed Ethernet Data Transmission

PowerPanel Management Software

EMI and RFI Filtration

  Box Contents

1. UT1050EIG UPS

2. Power Cord

3. Product Registration Card

4. Quick Start Guide

  * Product contents may vary according to different regions. For detailed information, please refer to user's manual/quick start guide.

CyberPower BR1000ELCD-UK offers home and office users a reliable battery backup and safeguards office PCs, network communication equipment, and other electronic devices from surges, spikes, brownouts and other power incidents. Designed with GreenPower UPS™ Technology to improve operating efficiency and to minimize energy consumption, users can enjoy significant energy cost savings over conventional UPS systems.

The UPS provides Automatic Voltage Regulation (AVR) to maintain a safe voltage for connected equipment. The featured data line protection protects phones, networks, and other communication equipment against surges/spikes and other power irregularities. Users can access precise information of critical power/battery conditions with the LCD status monitor.

Specifications

VA Watts Output Voltage
(Vac) Half Load Runtime
(min) Outlets 1000 600 230 ± 10% 6 UK x 6 Main Features

Energy Saving Technology

Automatic Voltage Regulation (AVR)

  LCD Status Display

Wall Mount Installation

  Line-interactive UPS Topology

Simulated Sine Wave Output

USB Charging Port(s)

Phone/Fax/Modem/DSL/Network Protection

Wall Mount Installation

Energy Saving Technology

Automatic Voltage Regulation (AVR)

Surge and Spike Protection

LCD Status Display

  Box Contents

1. BR1000ELCD-UK UPS

2. USB Cable

3. Phone Line

4. User's Manual

5. Product Registration Card

  * Product contents may vary according to different regions. For detailed information, please refer to user's manual/quick start guide.

The APC BVX1200LI Easy-UPS Desktop Uninterruptible Power Supply offers consistent and reliable power protection for homes and small offices. Designed to perform in unstable power conditions, it ensures steady connectivity during critical moments, providing backup and surge protection across multiple outlets with efficient energy regulation.

Key Features of APC BVX1200LI Easy-UPS Automatic Voltage Regulation (AVR) corrects voltage dips and surges to maintain safe equipment levels.
Compact design suitable for varied installation environments.
LED display clearly indicates unit and power status.
Cold start functionality enables operation during power outages.
Audible alarms notify users of changing power conditions.
Reliable Power Correction The Automatic Voltage Regulation system efficiently adjusts voltage fluctuations to ensure stable power delivery, protecting connected devices from potential damage caused by surges or dips.

Compact and Versatile Design Engineered for flexibility, the compact tower structure accommodates installation across various environments, making it suitable for both home and small office setups.

Intuitive Monitoring An integrated LED display provides real-time insight into utility and UPS power conditions, allowing for quick and clear monitoring of system performance.

Cold Start Capability The cold start function allows the UPS to power up directly from its battery, ensuring device functionality even in the absence of utility power.

Audible Notifications Built-in audible alarms alert users to shifts in power conditions, ensuring timely responses to protect connected devices and maintain continuous operation.

Specifications Output Power Capacity: 650 Watts / 1.2kVA
Output Connections: (6) IEC 320 C13 (Battery Backup)
Nominal Output Voltage: 230V
Nominal Input Voltage: 230V
Input Connections: IEC 60320 C14
Cord Length: 1.2 Metres

Manageability LED Indicators: Offer easy-to-read updates on the UPS and utility power conditions.
Audible Alarms: Provide warnings for any changes in power status or UPS operation.

Protection Battery and Surge Protected Outlets: Safeguard your devices from outages, surges, and spikes.
Battery Backup and Surge Protection: Maintain internet access and protect key electronics during outages.

Safety Safety-Agency Approved: Tested and certified for safe operation with connected equipment in specified environments.

Enhanced Features Cold-Start Capable: Provides temporary battery power during utility loss.
Boost AVR: Extends battery life by adjusting low voltages without draining power.
Transformer-Block Spaced Outlets: Prevents blocked connections, accommodating large plugs.
Sleek Design: Modern, adaptable design suitable for upright, flat, or wall-mounted positioning.

Availability Advanced Safety Features: Protects the UPS from overloads, short circuits, and voltage extremes.
Intelligent Battery Management: Optimizes battery health through precise charging.
Battery Failure Notification: Early fault detection supports proactive maintenance.

APC Warranties available for this Product APC Service Pack Warranty Extension
(New Product Purchases) FEWBEXTWAR1YR-SP-01A

Purchase 1 Year Warranty FEWBEXTWAR3YR-SP-01A

Purchase 3 Year Warranty Protection for your system, peace of mind for you - With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it. Battery Options for this Product APC Replacement Battery Cartridge - APCRBC175

This APC Replacement Battery Cartridge fits selected APC Smart-UPS and Back-UPS, restoring power back-up capacity for home offices, small businesses, and IT departments.

This replacement battery cartridge (RBC) has a lifetime of three to five years, offers safe and reliable support to the UPS, and extends the useful life of your UPS. The APC RBC comes fully assembled and includes easy-to-follow replacement instructions, making hot-swap installation simple. Purchase Replacement Battery Cartridge *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

The APC BX950MI is a 950VA uninterruptible power supply (UPS) designed to safeguard valuable electronics from power outages, surges, and voltage fluctuations. Ideal for both home and business use.

This UPS includes six (6) IEC 60320 C13 output connections and one (1) IEC 60320 C14 input connection.



Key Features Form Factor:

Compact design suitable for office and business spaces.
(BX950MI dimensions: 160 x 120 x 355 mm)

Functional Ease-of-Use

Front panel LED green indicators provide quick functional status updates.

1Gb Network Protection

Protects connected equipment and files from surges traveling through data lines without reducing internet performance.

Automatic Voltage Regulation (AVR)

Automatically adjusts high and low voltages to safe levels for your equipment.

Product Details and Specification Specification Output Power Capacity 520 Watts / 950 VA Output Connections (6) IEC 320 C13 (Battery Backup) Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connection IEC 60320 C14 Cord Length 1.2 Metres Key Features Automatic Voltage Regulation (AVR) Stabilizes voltage levels automatically for reliable equipment performance. Dataline Surge Protection Shields connected devices from surges traveling through data lines. LED Indicators Provides clear visual status of the UPS and power conditions. PowerChute Personal Edition OS Compatibility Compatible with multiple operating systems and processors. USB Connection Connect via USB to monitor and manage power protection settings. Availability Automatic Self-Test Performs regular battery self-tests to detect issues early. Battery Failure Notification Early-warning alerts for proactive battery maintenance. Intelligent Battery Management Optimizes battery performance, reliability, and lifespan through smart charging. Manageability LED Status Display Quickly view power and system conditions at a glance. Audible Alarms Sound alerts notify users of changes in utility or UPS power status. Protection Battery and Surge-Protected Outlets Safeguard hardware and data during outages, surges, and spikes. Surge-Only Outlets Protect secondary electronics without draining UPS battery capacity. Safety Safety-Agency Approved Certified for safe operation with compatible equipment and environments. Battery Options for this Product APC Replacement Battery Cartridge - RBC17

This APC Replacement Battery Cartridge fits selected APC Smart-UPS and Back-UPS, restoring power back-up capacity for home offices, small businesses, and IT departments.

This replacement battery cartridge (RBC) has a lifetime of three to five years, offers safe and reliable support to the UPS, and extends the useful life of your UPS. The APC RBC comes fully assembled and includes easy-to-follow replacement instructions, making hot-swap installation simple. Purchase Replacement Battery Cartridge *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

CyberPower VP1000EILCD offers home and office users a reliable battery backup and safeguards office PCs and other electronic devices from surges, spikes, brownouts and other power incidents. Designed with GreenPower UPS™ Technology to improve operating efficiency and to minimize energy consumption, users can enjoy significant energy cost savings over conventional UPS systems. The UPS provides Automatic Voltage Regulation (AVR) to maintain safe voltage for connected equipment.

The UPS provides multifunctional LCD readout to display clear power and battery conditions. The product features data line protection with high-speed transmission to safeguard phones, network and communication equipment against surge/spike as well as supply 1Gbps speed to transmit data. The UPS is also compatible with PowerPanel Power Management Software to achieve real-time monitoring and configuration.

Specifications

VA Watts Output Voltage
(Vac) Half Load Runtime
(min) Outlets 1000 550 230 ± 10% 9 IEC C13 x 6 Main Features

Energy Saving Technology

Automatic Voltage Regulation (AVR)

  LCD Status Display

High-Speed Ethernet Data Transmission

  Line-interactive UPS Topology

Generator Compatible

Automatic Voltage Regulation (AVR)

High-speed Ethernet Data Transmission

Surge and Spike Protection

PowerPanel Management Software

Energy Saving Technology

Simulated Sine Wave Output

LCD Status Display

USB Connectivity Port

Serial Connectivity Port

  Box Contents

1. VP1000EILCD UPS

2. Power Cord

3. USB Cable

4. User Manual

5. Product Registration Card

  * Product contents may vary according to different regions. For detailed information, please refer to user's manual/quick start guide.

Protect your home or office electronics with the APC BE850G2 Back-UPS, a reliable desktop Uninterruptible Power Supply (UPS) that safeguards your devices from blackouts and voltage spikes while keeping your workspace running smoothly.

Key Features of APC BE850G2 Back-UPS Power capacity: 520W/850VA
More outlets: 8 total outlets: 6 battery backup with surge protection and 2 surge protection only
Fast speed charging (Type C for BE850G2-UK): USB Type C & A for smartphones and tablets
Dataline surge protection: Protects equipment and files from surges on data lines
LED indicators: Quick info on remaining runtime
Mute button: Silence battery backup alarms easily
Powerchute personal edition: Auto-shutdown software with power and energy management features
User replaceable battery: Quickly swap out the battery when needed
3-year warranty: Three-year limited warranty with a lifetime Equipment Protection Policy up to £50,000
Reliable Battery Backup Keep your devices powered through short and medium blackouts, allowing you to save work and safely shut down connected equipment without interruption.

Superior Surge Protection Shield your electronics from damaging voltage spikes and surges that can occur on both utility and phone lines, protecting your valuable devices and data.

Desktop-Friendly Design Compact and sleek, the BE850G2 fits seamlessly into home or small office environments without taking up much space.

Easy-to-Use Indicators LED indicators provide a clear, simple way to monitor the UPS’s status and remaining runtime at a glance.

Simple Alarm Management The mute button allows you to silence the battery backup alarms quickly, reducing noise while still keeping your devices protected.

Convenient Battery Replacement The user-replaceable battery ensures minimal downtime and easy maintenance, keeping your UPS operational with little hassle.

Enhanced Charging Options Fast USB Type C & A ports (BE850G2-UK) allow efficient charging of smartphones and tablets directly from your UPS.

Powerchute Software Integration Automatic shutdown and energy management features make managing your devices effortless and provide added protection during outages.

Dataline Surge Protection Extra protection for your connected equipment and files against surges traveling along phone or data lines.

BE650G2-UK BE850G2-UK Output Power Capacity 650VA / 400W 850VA / 520W Output Voltage / Frequency (on utility) 180-266 Vac Out Voltage / Frequency (on battery) 230 Vac ± 8% Output Connections 8 total outlets: 6 battery backup and surge protection, 2 surge protection only USB Ports 2.4A, Type A ×1 2.4A, Type A ×1 + Type C ×1 Waveform Type Stepped Approximated Sinewave Power Factor 0.615 0.612 Input Input Voltage / Frequency 230 V nominal, 47–63 Hz Input Cord 1.83m cord, right-angle plug Surge Protection Surge Energy Rating 310 Dataline Surge Protection Network line – 10/100 Base-T Ethernet (RJ-45) Overload Protection 7A circuit breaker Physical Unit Dimensions (H x W x D) mm 120 x 130 x 365 Unit Weight 4 Kg ± 0.5kg 4.5 Kg ± 0.5kg Shipping Dimensions (H x W x D) 190 x 186 x 441 Shipping Weight 4.5 Kg ± 0.5kg 5 Kg ± 0.5kg Colour Black Battery Battery Type Lead acid Replacement Battery Yes Replacement Battery Kit APCRBC110 APCRBC17 Management Alarms On-battery, low battery, low battery shutdown, replace battery detected Shutdown Software PowerChute Personal Edition Conformance Certifications and Approvals CE & EAC APC Warranties available for this Product APC Service Pack Warranty Extension
(New Product Purchases) WBEXTWAR1YR-SP-01A

Purchase 1 Year Warranty WBEXTWAR3YR-SP-01A

Purchase 3 Year Warranty APC Service Pack Warranty Extension
(Renewal or High Volume) WEXTWAR1YR-SP-01A

Purchase 1 Year Warranty Protection for your system, peace of mind for you - With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it. Battery Options for this Product APC Replacement Battery Cartridge - RBC17

This APC Replacement Battery Cartridge fits selected APC Smart-UPS and Back-UPS, restoring power back-up capacity for home offices, small businesses, and IT departments.

This replacement battery cartridge (RBC) has a lifetime of three to five years, offers safe and reliable support to the UPS, and extends the useful life of your UPS. The APC RBC comes fully assembled and includes easy-to-follow replacement instructions, making hot-swap installation simple. Purchase Replacement Battery Cartridge *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

CyberPower BR1200ELCD-UK offers home and office users a reliable battery backup and safeguards office PCs, network communication equipment, and other electronic devices from surges, spikes, brownouts and other power incidents. Designed with GreenPower UPS™ Technology to improve operating efficiency and to minimize energy consumption, users can enjoy significant energy cost savings over conventional UPS systems.

The UPS provides Automatic Voltage Regulation (AVR) to maintain a safe voltage for connected equipment. The featured data line protection protects phones, networks, and other communication equipment against surges/spikes and other power irregularities. Users can access precise information of critical power/battery conditions with the LCD status monitor.

Specifications

VA Watts Output Voltage
(Vac) Half Load Runtime
(min) Outlets 1200 720 230 ± 10% 9 UK x 6 Main Features

Energy Saving Technology

Automatic Voltage Regulation (AVR)

  LCD Status Display

Wall Mount Installation

  Line-interactive UPS Topology

Simulated Sine Wave Output

USB Charging Port(s)

Phone/Fax/Modem/DSL/Network Protection

Wall Mount Installation

Energy Saving Technology

Automatic Voltage Regulation (AVR)

Surge and Spike Protection

LCD Status Display

  Box Contents

1. BR1200ELCD-UK UPS

2. USB Cable

3. Phone Line

4. User's Manual

5. Product Registration Card

  * Product contents may vary according to different regions. For detailed information, please refer to user's manual/quick start guide.

Ensure uninterrupted operation of your valuable electronics with the APC BX1200MI Back-UPS. Designed for home and office environments, this reliable desktop UPS safeguards your essential devices from unexpected power interruptions, ensuring stability and protection every time you power up.

Key Features of APC BX1200MI Back-UPS Extended Battery Backup: Provides sufficient runtime to save work and safely shut down systems during outages.
Comprehensive Surge Protection: Shields connected devices from harmful voltage spikes and electrical surges.
Versatile Connectivity: Equipped with 6 IEC outlets for simultaneous device protection and power management.
Automatic Voltage Regulation (AVR): Stabilizes high and low voltages for safe, consistent power delivery.
Compact and Functional Design: Ideal for business or home office spaces, measuring 190 x 140 x 390 mm.
LED Indicators: Quick visual confirmation of UPS operating status with front panel green lights.
Compact and Practical The APC BX1200MI’s compact form makes it perfect for desktops or small office setups. Despite its size, it offers exceptional protection against both power interruptions and surges, maintaining your system’s stability at all times.

Advanced Power Management Featuring Automatic Voltage Regulation (AVR), this UPS continuously adjusts input voltage, ensuring consistent performance and reducing wear on internal components.

Connectivity and Compatibility With six IEC 60320 C13 outlets and a C14 input connection, the BX1200MI offers flexibility for connecting a range of electronic devices. The included USB port allows PC-based monitoring via PowerChute Personal Edition software, compatible with multiple operating systems.

Comprehensive Protection Not only does the BX1200MI provide battery backup, but it also safeguards against “back door” surges through data lines—protecting sensitive information without compromising network speed.

Availability and Reliability Automatic self-tests, intelligent battery management, and fault notification systems work together to maximize reliability and performance. Early detection ensures minimal downtime and optimal battery efficiency.

Manageability Audible alarms and clear LED indicators keep you informed of power conditions, letting you respond promptly to changes in system status.

Safety Assured Tested and approved by recognized safety agencies, the APC BX1200MI meets stringent safety standards to ensure secure operation with connected equipment and within various environments.

APC Warranties available for this Product APC Service Pack Warranty Extension
(New Product Purchases) FEWBEXTWAR1YR-SP-01A

Purchase 1 Year Warranty FEWBEXTWAR3YR-SP-01A

Purchase 3 Year Warranty Protection for your system, peace of mind for you - With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it. Battery Options for this Product APC Replacement Battery Cartridge - APCRBC175

This APC Replacement Battery Cartridge fits selected APC Smart-UPS and Back-UPS, restoring power back-up capacity for home offices, small businesses, and IT departments.

This replacement battery cartridge (RBC) has a lifetime of three to five years, offers safe and reliable support to the UPS, and extends the useful life of your UPS. The APC RBC comes fully assembled and includes easy-to-follow replacement instructions, making hot-swap installation simple. Purchase Replacement Battery Cartridge *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

Easy UPS delivers reliable power protection designed for environments with unstable electricity. It ensures continuous and stable connectivity during critical operations, making it an essential safeguard for both home and professional setups. With robust voltage regulation, advanced safety mechanisms, and intuitive monitoring features, this UPS guarantees peace of mind during power fluctuations or outages.

Key Features of Easy UPS Automatic Voltage Regulation (AVR) maintains consistent voltage levels for connected equipment.
LED and audible indicators provide clear status updates and power condition alerts.
Multiple protected outlets ensure devices and data remain safe during surges and power losses.
Compact, versatile design allows for upright, flat, or wall-mounted installation.
Specifications Output Power Capacity: 900 Watts / 1.6kVA

Output Connections: (6) IEC 320 C13 (Battery Backup)

Nominal Output Voltage: 230V

Nominal Input Voltage: 230V

Input Connections: IEC 60320 C14

Cord Length: 1.2 Metres

Manageability LED Indicators: Offer instant visual feedback on utility and battery power status.

Audible Alarms: Notify users of power changes and system alerts in real time.

Protection Battery and Surge Protected Outlets: Ensure hardware and data are safe from power disruptions, surges, and spikes.

Extended Runtime: Provides sufficient power to keep network and low-power devices operational during outages.

Safety Safety-Agency Approved: Verified for compliance and safe operation with connected equipment and standard environments.

Additional Features Cold-Start Capable: Operates temporarily on battery when mains power is unavailable.

Boost AVR: Corrects low voltage levels without draining the battery, optimizing lifespan and efficiency.

Transformer-Block Spaced Outlets: Allow larger plugs without obstructing other connections.

Sleek Design: A modern build suited for flexible placement and aesthetic integration.

Availability Advanced Safety Features: Protects against overload, voltage fluctuations, short circuits, and low battery conditions.

Intelligent Battery Management: Enhances battery performance through smart charging controls.

Battery Failure Notification: Provides early alerts for preventive maintenance and uninterrupted protection.

APC Warranties available for this Product APC Service Pack Warranty Extension
(New Product Purchases) FEWBEXTWAR1YR-SP-01

Purchase 1 Year Warranty FEWBEXTWAR3YR-SP-01

Purchase 3 Year Warranty APC Service Pack Warranty Extension
(Renewal or High Volume) FEWEXTWAR1YR-SP-01

Purchase 1 Year Warranty FEWEXTWAR3YR-SP-01

Purchase 3 Year Warranty Protection for your system, peace of mind for you - With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it.

The APC BX1600MI Back-UPS Desktop Uninterruptible Power Supply delivers reliable battery backup and surge protection for home or office electronics. Designed to support computers and sensitive devices, this unit ensures uninterrupted operation and prevents data loss during power disturbances. With six IEC 60320 C13 output connections, it provides broad connectivity for various systems.

Key Features of APC BX1600MI Back-UPS Automatic Voltage Regulation (AVR) stabilizes fluctuating input voltage to protect connected equipment.
Compact and efficient design suited for office or business environments (190 x 140 x 390 mm).
Front panel LED indicators provide quick visual confirmation of UPS status and power conditions.
Dataline surge protection shields your devices from voltage spikes without affecting data speed.
USB connectivity allows advanced monitoring and control through a computer interface.
PowerChute software support for multiple operating systems.
Performance and Efficiency The BX1600MI offers an output power capacity of 900 Watts / 1.6kVA, making it suitable for multiple electronic devices. Automatic Voltage Regulation adjusts voltages to safe operating levels, extending the lifespan of connected components.

Design and Functionality This model combines compact dimensions with intelligent internal management. Its intuitive LED front panel displays operational status, while audible alarms alert users to power fluctuations or UPS mode transitions.

Connectivity Equipped with six IEC 60320 C13 output connections and an IEC 60320 C14 input connector, the UPS provides versatile and secure power delivery. The 1.2-meter cord ensures flexible placement in workspaces.

Battery Management Intelligent battery management optimizes performance and lifespan through precision charging. Automatic self-tests identify battery conditions early, and fault notifications assist in preventive maintenance.

Protection The unit offers both battery-backed and surge-only outlets, protecting essential equipment during outages while isolating secondary devices from consuming reserve power. This design ensures efficient energy distribution during extended interruptions.

Safety Compliance Certified by safety agencies, the APC BX1600MI ensures dependable operation within specified environments. It meets rigorous standards for electrical performance and product reliability.

APC Warranties available for this Product APC Service Pack Warranty Extension
(New Product Purchases) FEWBEXTWAR1YR-SP-01

Purchase 1 Year Warranty FEWBEXTWAR3YR-SP-01

Purchase 3 Year Warranty APC Service Pack Warranty Extension
(Renewal or High Volume) FEWEXTWAR1YR-SP-01

Purchase 1 Year Warranty FEWEXTWAR3YR-SP-01

Purchase 3 Year Warranty Protection for your system, peace of mind for you - With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it. Battery Options for this Product APC Replacement Battery Cartridge - APCRBC176

This APC Replacement Battery Cartridge fits selected APC Smart-UPS and Back-UPS, restoring power back-up capacity for home offices, small businesses, and IT departments.

This replacement battery cartridge (RBC) has a lifetime of three to five years, offers safe and reliable support to the UPS, and extends the useful life of your UPS. The APC RBC comes fully assembled and includes easy-to-follow replacement instructions, making hot-swap installation simple. Purchase Replacement Battery Cartridge *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

The APC Back-UPS Pro delivers reliable battery backup and surge protection, making it ideal for homes, home offices, and small businesses. With enhanced runtime and power capabilities, it safeguards your critical electronics during power disturbances while maintaining consistent performance.

Key Features of APC Back-UPS Pro Battery backup & surge protector outlets - Keep valuable devices running when the power is outside of safe levels
Sinewave power output* - Ensures power quality without distortion or power drop during an outage. Ideal for advanced workstations, high-end PCs, multimedia devices, and home storage
2 USB charging ports (Type C + Type A)* - Fast charge mobile devices such as smartphones and tablets
AVR with boost and trim - Instantly corrects low/high voltage fluctuations and is Active Power Factor Correction (PFC) compatible
1Gb network protection - Safeguards your equipment and valuable files from “back door” surges traveling along data lines without sacrificing internet speed
User replaceable batteries - Allows you to quickly replace batteries
LCD interface - Quick and easy to read, provides information about the utility and UPS conditions
PowerChute Personal Edition - Easy-to-use auto-shutdown software with power and energy management features
3-year warranty - Three-year limited warranty
Premium Power Protection Protects high-performance computer systems, routers/modems, external storage devices, game consoles, and other electronics in your home or business.

Outlet Configuration The 900VA tower UPS includes 6 total outlets, all providing battery backup and surge protection, keeping your devices operational during power interruptions.

Surge Energy Rating With a surge energy rating of 557 Joules, your connected devices remain safe from unexpected spikes in electricity.

Extended Runtime The UPS offers 42 minutes of runtime at 100 Watts, ensuring continuous operation of essential electronics during outages.

Compact Design Measuring 19 x 9.1 x 31 cm and weighing 7.1 kg, the tower fits neatly in home or office setups without taking up excessive space.

CE Certified and User-Friendly CE product certification ensures compliance with European safety standards, while user-replaceable batteries and an LCD interface make monitoring and maintenance simple.

Software Integration PowerChute Personal Edition software provides easy-to-use auto-shutdown capabilities along with energy management and monitoring functions.

APC Warranties available for this Product APC Service Pack Warranty Extension
(New Product Purchases) FEWBEXTWAR1YR-SP-01

Purchase 1 Year Warranty FEWBEXTWAR3YR-SP-01

Purchase 3 Year Warranty APC Service Pack Warranty Extension
(Renewal or High Volume) FEWEXTWAR1YR-SP-01

Purchase 1 Year Warranty FEWEXTWAR3YR-SP-01

Purchase 3 Year Warranty Protection for your system, peace of mind for you - With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it. Battery Options for this Product APC Replacement Battery Cartridge - APCRBC164

This APC Replacement Battery Cartridge fits selected APC Smart-UPS and Back-UPS, restoring power back-up capacity for home offices, small businesses, and IT departments.

This replacement battery cartridge (RBC) has a lifetime of three to five years, offers safe and reliable support to the UPS, and extends the useful life of your UPS. The APC RBC comes fully assembled and includes easy-to-follow replacement instructions, making hot-swap installation simple. Purchase Replacement Battery Cartridge *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

Product Comparison

  BR650MI BR900MI
BR1300MI BR1600MI Output Power Capacity 390W/650VA 540W/900VA 780W/1300VA 960W/1600VA Output Voltage / Frequency (on utility) 196 to 264 Vac Out Voltage / Frequency (on battery) 230 V ± 8%, 50/60 Hz ± 1 Hz Output Connections 6 battery backup with surge protection outlets (IEC) 8 total outlets: 6 battery backup with surge protection and 2 surge protection only (IEC) Waveform Type Line Interactive/Stepped apprx sinewave Power Factor 0.6 Input Input Voltage / Frequency 230 V nominal, 50/60 Hz ± 3 Hz Input Cord 6 ft cord, straight plug end with IEC outlet port Surge Protection Surge Energy Rating 557 Dataline Surge Protection 1 Gb Dataline protection Overload Protection On line: 10A circuit breaker, with overload warning capability
On battery: internal current limit to overload alarm/shutdown Physical Unit Dimensions
(H x W x D) mm 190x91x310 100x250x382 Unit Weight 6.4 kg 7 kg 10.2 kg 10.9 kg Shipping Dimensions
(H x W x D) 255 x 440 x 143 330 x 485 x 225 Shipping Weight 7.4 kg 8 kg 11.85 kg 11.65 kg RBC APCRBC110 APCRBC164 APCRBC165 APCRBC166 Runtime
(full load) 3 3 4 4 Runtime
(half load) 10.5 11.4 10.6 10.4 Colour Black Battery Battery Type Lead acid Replacement Battery Yes Management Alarms On-battery, low battery warning,
low battery shutdown, replace battery detected Shutdown Software PCPE Software Conformance Certifications
and Approvals TDC lab: TUV GS, CB 60950 & 62040
Taiwan EMC lab: TelePermit
Local Support: RCM, EAC, KETI, TISI Warranty and
Equipment Protection Three-year limited warranty with a lifetime
Equipment Protection Policy up to €150,00

Overview

The Vertiv™ EDGE-750IMT comes in a tower format and offers 750VA/630W of backup power protection for server and networking equipment. Featuring a high 0.9 power factor, controllable outlets, and an intuitive LCD screen, Vertiv EDGE is a simple, cost-effective choice for distributed and edge IT applications.


Features
High output PF=0.9 to maximize available power and protect more equipment


1U, 2U, 3U, tower, rack/tower form factors, with power ratings from 500VA to 3000VA, to address a broad range of power requirements


Color graphic LCD display


Add up to 6 extended run battery cabinets to increase runtime


"Green mode" operation: in battery mode with small loads, the UPS will automatically shut down to protect batteries, optimize energy savings


Programmable outlets to disable non-critical loads, optimize battery runtime


Smart fan speed control for lower audible noise


RoHS and REACH compliant 
High efficiency, up to 98% in line mode, to deliver energy savings


Advanced AVR protection with 2x boost and 1x buck tap to protect the battery by smoothing out spikes, sags and brownouts


External battery cabinets with auto-detection


Rack/tower 3kVA model with short depth for flexible installation


Remote connectivity via network interface or serial connection to monitor power consumption and configure user-defined alert notifications to prevent downtime


Input breaker device for additional protection to the load in worst case failures


Extend battery life with deep discharge protection
  Product Diagram

USB Port
Output receptacles
Programmable output group
Input power socket
Input circuit breaker
Emergency Power Off (EPO) connector
Vertiv™ Intellislot® Port for optional management cards
Earth terminal
Technical Specifications Power Rating 750VA / 675W Input Voltage 230V AC Output Voltage 200 / 208 / 220 / 230 / 240 VAC Efficiency 95% Wiring Input: IEC C14 Output: 3+2 x IEC C13 Interface Options USB & Slot for optional cards Control Panel LCD Display Operating Temperature 0 - 40ºC Listings CE, CB Topology Line interactive (pure sinewave)

The Eaton ELP850IEC Ellipse PRO 2U UPS Uninterruptible Power Supply is a line interactive UPS specifically developed to protect workstations running demanding applications. The Ellipse PRO features a LCD display for real time status and measurements, 4 outlets ( 3 with battery backup and lightning protection and one with lightning protection. This unit includes Eco Control power outlets, which enable energy savings up to 20 percent and Advanced Surge Reduction (ASR) that complies fully with the requirements of the IEC 616431-1 standard. This UPS can be either placed as a tower, in a rack or be wall mounted.

Key Features Protects data connections such as Ethernet, internet and telephone lines
USB port & Eaton UPS Companion software that enables safe system shutdown, energy usage metering and easy configuration of UPS settings
Convenient extra-flat design for easy installation in any office environment
Includes a high performance surge-protection device which complies with IEC 61643-1 standard
EcoControl function helps you save up to 20% energy compared to previous generation UPSs
Three-year warranty including batteries.
Unlimited warranty for connected computer equipment
Battery tests itself automatically at regular intervals, ensuring early detection when it’s time for replacement.
Easy-to-replace battery helps to extend UPS service life




3 outlets with surge protection and backup , 1 socket with surge protection only
1 EcoControl socket
Telephone, internet and Ethernet protection
USB port
Replaceable batteries
Circuit breaker reset button

Eaton 5SC UPS provides line-interactive, affordable and reliable protection for small business servers. It includes a LCD interface for real time status and measurement. This unit also possesses the Advanced Battery Management (ABM) technology that increases battery lifetime. It is line interactive with Automatic Voltage Regulation (AVR). With its 6 IEC outputs and compact design the 5SC fits anywhere easily.
Key Features LCD interface clearly shows key information
Sinewave output for compatibility with today’s small business servers
Compact design for easy integration even with space constraints (kiosks, cash machines, ticket machines etc.) and up to eight outlets for better flexibility
Reliable, long-lasting UPS with patented ABM technology that increases battery service life by up to 50%
Eaton Intelligent Power software delivered as standard is compatible with all major operating systems

Overview

The Vertiv™ EDGE-1000IMT comes in a tower format and offers 1000VA/900W of backup power protection for server and networking equipment. Featuring a high 0.9 power factor, controllable outlets, and an intuitive LCD screen, Vertiv EDGE is a simple, cost-effective choice for distributed and edge IT applications.


Features
High output PF=0.9 to maximize available power and protect more equipment


1U, 2U, 3U, tower, rack/tower form factors, with power ratings from 500VA to 3000VA, to address a broad range of power requirements


Color graphic LCD display


Add up to 6 extended run battery cabinets to increase runtime


"Green mode" operation: in battery mode with small loads, the UPS will automatically shut down to protect batteries, optimize energy savings


Programmable outlets to disable non-critical loads, optimize battery runtime


Smart fan speed control for lower audible noise


RoHS and REACH compliant 
High efficiency, up to 98% in line mode, to deliver energy savings


Advanced AVR protection with 2x boost and 1x buck tap to protect the battery by smoothing out spikes, sags and brownouts


External battery cabinets with auto-detection


Rack/tower 3kVA model with short depth for flexible installation


Remote connectivity via network interface or serial connection to monitor power consumption and configure user-defined alert notifications to prevent downtime


Input breaker device for additional protection to the load in worst case failures


Extend battery life with deep discharge protection
  Technical Specifications Power Rating 1000VA / 900W Input Voltage 230V AC Output Voltage 200 / 208 / 220 / 230 / 240 VAC Efficiency 96% Wiring Input: IEC C14 Output: 3+2 x IEC C13 Interface Options USB & Slot for optional cards Control Panel LCD Display Operating Temperature 0 - 40ºC Listings CE, CB Topology Line interactive (pure sinewave)

The Eaton ELP1200IEC Ellipse PRO 2U UPS Uninterruptible Power Supply is a line interactive UPS specifically developed to protect workstations running demanding applications. The Ellipse PRO features a LCD display for real time status and measurements, 8 outlets ( 4 with battery backup and lightning protection and 4 with lightning protection). This unit includes Eco Control power outlets, which enable energy savings up to 20 percent and Advanced Surge Reduction (ASR) that complies fully with the requirements of the IEC 616431-1 standard. This UPS can be either placed as a tower, in a rack or be wall mounted.

Key Features Protects data connections such as Ethernet, internet and telephone lines
USB port & Eaton UPS Companion software that enables safe system shutdown, energy usage metering and easy configuration of UPS settings
Convenient extra-flat design for easy installation in any office environment
Includes a high performance surge-protection device which complies with IEC 61643-1 standard
EcoControl function helps you save up to 20% energy compared to previous generation UPSs
Three-year warranty including batteries.
Unlimited warranty for connected computer equipment
Battery tests itself automatically at regular intervals, ensuring early detection when it’s time for replacement.
Easy-to-replace battery helps to extend UPS service life




4 sockets with surge protection and backup
4 sockets with surge protection
2 EcoControl sockets
Telephone, internet and Ethernet protection
USB port
Replaceable batteries

Protect your valuable electronics with the APC BR1300MI Back-UPS Pro — a reliable Uninterruptible Power Supply (UPS) designed to deliver consistent performance for both home and office environments. Built for UK households and small businesses, this UPS ensures your devices stay powered and protected from unexpected electrical disruptions.

Key Features of APC BR1300MI Back-UPS Pro Battery backup & surge protector outlets – Keep valuable devices running when power levels drop or spike beyond safe limits.
Sinewave power output – Maintains clean and stable power, ideal for high-end PCs, multimedia systems, and sensitive electronics.
2 USB charging ports (Type C + Type A) – Conveniently charge mobile devices such as smartphones and tablets with rapid power delivery.
AVR with boost and trim – Automatically corrects voltage fluctuations and supports Active Power Factor Correction (PFC) devices.
1Gb network protection – Shields equipment and files from surges traveling through data lines while maintaining full internet speed.
User replaceable batteries – Enables quick battery replacement to extend the UPS’s life cycle.
LCD interface – Provides real-time system status and power conditions at a glance.
PowerChute Personal Edition software – Offers intelligent power and energy management with automatic system shutdown features.
Comprehensive Power Management The APC BR1300MI Back-UPS Pro offers premium power protection and energy management. With eight IEC 60320 C13 output connections and a C14 input, it supports multiple devices simultaneously while maintaining energy efficiency.

Optimized for Modern Devices Equipped with sinewave output, the BR1300MI ensures uninterrupted and distortion-free power delivery. It is the perfect choice for advanced computing systems, multimedia equipment, and home storage setups requiring dependable performance.

Smart Voltage Regulation The integrated Automatic Voltage Regulation (AVR) stabilizes power without switching to battery mode, preserving battery life and ensuring consistent performance even in unstable grid conditions.

Enhanced Connectivity and Usability Featuring Type-C and Type-A USB ports, the UPS delivers high-speed charging for mobile devices. The intuitive LCD display provides at-a-glance updates on battery life, load levels, and power status.

Network and Data Line Protection The built-in 1Gb network protection defends against surges transmitted through Ethernet connections, securing critical data while maintaining fast connectivity speeds.

Durable and User-Friendly Design With easily replaceable batteries and a compact form factor, the APC BR1300MI offers long-term value and effortless maintenance for modern power management needs.

Product Comparison


BR650MI BR900MI BR1300MI BR1600MI Output Power Capacity 390W/650VA 540W/900VA 780W/1300VA 960W/1600VA Output Voltage / Frequency (on utility) 196 to 264 Vac Output Voltage / Frequency (on battery) 230 V ± 8%, 50/60 Hz ± 1 Hz Output Connections 6 battery backup with surge protection outlets (IEC) 8 total outlets: 6 battery backup with surge protection and 2 surge protection only (IEC) Waveform Type Line Interactive / Stepped Approx. Sinewave Power Factor 0.6 Input Input Voltage / Frequency 230 V nominal, 50/60 Hz ± 3 Hz Input Cord 6 ft cord, straight plug end with IEC outlet port Surge Protection Surge Energy Rating 557 Dataline Surge Protection 1 Gb Dataline protection Overload Protection On line: 10A circuit breaker with overload warning
On battery: internal current limit with overload alarm/shutdown Physical Unit Dimensions (H x W x D) mm 190 x 91 x 310 100 x 250 x 382 Unit Weight 6.4 kg 7 kg 10.2 kg 10.9 kg Shipping Dimensions (H x W x D) 255 x 440 x 143 330 x 485 x 225 Shipping Weight 7.4 kg 8 kg 11.85 kg 11.65 kg RBC APCRBC110 APCRBC164 APCRBC165 APCRBC166 Runtime (full load) 3 3 4 4 Runtime (half load) 10.5 11.4 10.6 10.4 Colour Black Battery Battery Type Lead acid Replacement Battery Yes Management Alarms On-battery, low battery warning,
low battery shutdown, replace battery detected Shutdown Software PCPE Software Conformance Certifications and Approvals TDC lab: TUV GS, CB 60950 & 62040
Taiwan EMC lab: TelePermit
Local Support: RCM, EAC, KETI, TISI

APC Warranties available for this Product APC Service Pack Warranty Extension
(New Product Purchases) FEWBEXTWAR1YR-SP-01

Purchase 1 Year Warranty FEWBEXTWAR3YR-SP-01

Purchase 3 Year Warranty APC Service Pack Warranty Extension
(Renewal or High Volume) FEWEXTWAR1YR-SP-01

Purchase 1 Year Warranty FEWEXTWAR3YR-SP-01

Purchase 3 Year Warranty Protection for your system, peace of mind for you - With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it. Battery Options for this Product APC Replacement Battery Cartridge - APCRBC165

This APC Replacement Battery Cartridge fits selected APC Smart-UPS and Back-UPS, restoring power back-up capacity for home offices, small businesses, and IT departments.

This replacement battery cartridge (RBC) has a lifetime of three to five years, offers safe and reliable support to the UPS, and extends the useful life of your UPS. The APC RBC comes fully assembled and includes easy-to-follow replacement instructions, making hot-swap installation simple. Purchase Replacement Battery Cartridge *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

The Eaton 5S UPS provides cost effective line interactive backup power and automatic voltage regulation (AVR) for small and medium businesses. Suited for workstations, desktop PCs, telephone equipment, this product also brings internet and Ethernet protection With its 4 IEC outlets ( 4 with battery backup and surge protection and 4 with lightning protection), It can be placed as a standalone tower or under a computer monitor and its slim line design saves space. Furthermore, the 5S possesses an audible alarm to warn you when there is a power problem.

Key Features Delivers consistent, clean output with Automatic Voltage Regulation (AVR)
HID-compliant USB port, for automatic integration with common operating systems
Extends UPS service life with replaceable batteries
 

Overview

The Vertiv™ EDGE-1500IMT comes in a tower format and offers 1500VA/1350W of backup power protection for server and networking equipment. Featuring a high 0.9 power factor, controllable outlets, and an intuitive LCD screen, Vertiv EDGE is a simple, cost-effective choice for distributed and edge IT applications.


Features
High output PF=0.9 to maximize available power and protect more equipment


1U, 2U, 3U, tower, rack/tower form factors, with power ratings from 500VA to 3000VA, to address a broad range of power requirements


Color graphic LCD display


Add up to 6 extended run battery cabinets to increase runtime


"Green mode" operation: in battery mode with small loads, the UPS will automatically shut down to protect batteries, optimize energy savings


Programmable outlets to disable non-critical loads, optimize battery runtime


Smart fan speed control for lower audible noise


RoHS and REACH compliant 
High efficiency, up to 98% in line mode, to deliver energy savings


Advanced AVR protection with 2x boost and 1x buck tap to protect the battery by smoothing out spikes, sags and brownouts


External battery cabinets with auto-detection


Rack/tower 3kVA model with short depth for flexible installation


Remote connectivity via network interface or serial connection to monitor power consumption and configure user-defined alert notifications to prevent downtime


Input breaker device for additional protection to the load in worst case failures


Extend battery life with deep discharge protection
  Technical Specifications Power Rating 1500VA / 1350W Input Voltage 230V AC Output Voltage 200 / 208 / 220 / 230 / 240 VAC Efficiency 96% Wiring Input: IEC C14 Output: 3+3 x IEC C13 Interface Options USB & Slot for optional cards Control Panel LCD Display Operating Temperature 0 - 40ºC Listings CE, CB Topology Line interactive (pure sinewave)

APC’s SMT1000I is part of the award winning Smart-UPS family which is the most popular UPS in the world for servers, storage and networks.

The 700W 1000VA UPS is trusted to protect critical data and equipment from power problems, and supplies clean and reliable network-grade power. In addition to legendary reliability and manageability, Smart-UPS units have extremely high efficiency at low, medium and high load levels, making them ideal for today’s multi-core or virtualized servers that have varying load consumption.







Product Features:

1. Alphanumeric LCD (Liquid Crystal Display) - Intuitive interface provides detailed and accurate information with the ability to configure locally.

2. Communication Ports - Serial, USB, and SmartSlot™ for accessory cards.

3. 8 IEC320 C13 Outlets

4. Battery disconnect - Convenient way to disconnect battery for transport

5. Push Button Circuit Breaker - enables quick recovery from overloads.

6. Network-Grade Power - Provides most stable power conditions by filtering noise, automatic voltage regulation (AVR), and surge protection.

7. High Efficiency Green Mode - Saves utility costs and reduces heat promoting longer component life.

8. Advanced Battery Management - Temperature-compensated charging extends life and advanced algorithms recommend replacement date.

Smart-UPS Display
Intuitive, easy-to-use LCD interface

LCD Display Screen - Clear, consistent, and detailed information in your choice of basic or advanced menus.

Power Status:
Operating mode and efficiency
Load VA/Watts/Amps
Input/Output voltage and frequency
Battery capacity and runtime
Energy meter and more
Control - UPS and outlet group settings
Language

Power quality settings

Alarm, delay and threshold settings

Test and Diagnostics - Initiate battery and runtime calibration tests

Logs - See explanation of last 10 transfers and faults

About - UPS and replacement battery part numbers, serial numbers, battery install, and suggested replacement dates

Online Status Indicators - Online, on battery, fault, and replace battery LEDs for quick status identification.

Escape - Exits to the previous menu or screen.

Return - Used to enter or confirm settings.

Navigation Arrows - Allow for quick adjustment of settings.
APC Warranties available for this UPS APC Service Pack Warranty Extension
(New Product Purchases)

       APC Service Pack Warranty Extension
(Renewal or High Volume)

          FEWBEXTWAR1YR-SP-02   FEWBEXTWAR3YR-SP-02              FEWEXTWAR1YR-SP-02   FEWEXTWAR3YR-SP-02

Protection for your system, peace of mind for you - With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it.

Replacement Battery Options for this UPS APC Replacement Battery Cartridge - FERBC6

This APC Replacement Battery Cartridge fits selected APC Smart-UPS and Back-UPS, restoring power back-up capacity for home offices, small businesses and IT departments.

This replacement battery cartridge (RBC) has a lifetime of three to five years, offers safe and reliable support to the UPS, and extends the useful life of your UPS. The APC RBC comes fully assembled and includes easy-to-follow replacement instructions, making hot-swap installation simple.

APC’s SMT750IC is part of the award winning Smart-UPS family which is the most popular UPS in the world for servers, storage and networks.

APC award winning Rackmountable SMT1500IC is an affordable true sine-wave UPS in the Smart-UPS family. A 500w 750va UPS designed for entry level servers and network equipment, it is compatible with today’s active power factor corrected (PFC) power supplies.




Introducing APC SmartConnect - the next generation of Smart-UPS

The next generation of Smart-UPS™ now boast an ingenious connectivity feature that makes Smart-UPS even more adaptable and even easier to deploy. APC™ SmartConnect is an enabling feature that allows customers to view the status of their UPS through a secure web portal. Through this innovative remote management interface, customers will receive automatic notifications, firmware updates, and advanced support. APC SmartConnect's easy-to-use network connectivity provides added value, and more importantly, added peace of mind.

Key Features First of its kind: The APC SmartConnect feature makes Connected Smart-UPS the first cloud enabled UPS for distributed IT.
Advice from the experts: Connected Smart-UPS routinely provides proactive UPS lifecycle recommendations, helping maximise the lifespan of your APC UPS.
Accessibility: The APC SmartConnect web portal is accessible from any internet connected device. You'll be able to check on your IT equipment on site or on the go.
Enabled as a standard: APC SmartConnect will be automatically included on select Smart-UPS models; making it the perfect solution for price-conscious professionals in need of power security.
Seamless integration: Easily integrate with leading remote monitoring and management solutions, so you can manage customer portfolios in a single platform.
Secure, remote monitoring
Connected Smart-UPS support remote monitoring through our secure web portal, so you can always be up to date on the status of your power infrastructure.

Pro-active lifecycle alerts
Maximise the life span of your UPS, and protect your investment, with pro-active alerts for firmware upgrade, device maintenance and warranty protection.

Cloud enabled as standard
New Smart-UPS models are cloud enabled as standard, with an inbuilt ethernet port. We've made it as easy and cost effective as possible to monitor your UPS online.

Trusted to protect critical data and equipment from power problems by supplying clean and reliable network-grade power. In addition to legendary reliability and manageability, Smart-UPS have extremely high efficiency at low, medium and high load levels making them ideal for today's multi-core or virtualised servers that have varying load consumption.

Included PowerChute Business Edition software is compatible with all major server operating systems and provides UPS management and safe system shutdown.



Main Features Cold-start capable - Provides temporary battery power when the utility power is out.
Green mode - Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
High online efficiency - Reduces utility costs, generates less heat.
LCD Status Display - Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
Pure sine wave output on battery - Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Temperature-compensated battery charging - Prolongs battery life by regulating the charge voltage according to battery temperature.
Product Features Alphanumeric LCD
Intuitive interface provides detailed and accurate information with the ability to configure locally.
Communication Ports
Serial, USB, and SmartSlot™ for accessory cards.
6 IEC320 C13 Outlets
Battery disconnect
Convenient way to disconnect battery for transport.
Push Button Circuit Breaker
Provides for easy recovery from circuit overloads and protects your fuse box and electronics from electrical damage.
Network-Grade Power
Provides most stable power conditions by filtering noise, automatic voltage regulation (AVR), and surge protection.
High Efficiency Green Mode
Saves utility costs and reduces heat promoting longer component life.
Advanced Battery Management
Temperature-compensated charging extends life and advanced algorithms recommend replacement date.
Display Features Intuitive, easy-to-use LCD interface - Clear, consistent, and detailed information in your choice of basic or advanced menus.

Power Status

Operating mode and efficiency
Load VA/Watts/Amps
Input/Output voltage and frequency
Battery capacity and runtime
Energy meter and more
Control - UPS and outlet group settings

Language

Power quality settings

Alarm, delay and threshold settings

Test and Diagnostics - Initiate battery and runtime calibration tests

Logs - See explanation of last 10 transfers and faults

About - UPS and replacement battery part numbers, serial numbers, battery install, and suggested replacement dates

Online Status Indicators - Online, on battery, fault, and replace battery LEDs for quick status identification

Escape - Exits to the previous menu or screen

Return - Used to enter or confirm settings.

Navigation Arrows - Allow for quick adjustment of settings.

APC Warranties available for this Product APC Service Pack Warranty Extension
(New Product Purchases) FEWBEXTWAR1YR-SP-02

Purchase 1 Year Warranty FEWBEXTWAR3YR-SP-02

Purchase 3 Year Warranty APC Service Pack Warranty Extension
(Renewal or High Volume) FEWEXTWAR1YR-SP-02

Purchase 1 Year Warranty FEWEXTWAR3YR-SP-02

Purchase 3 Year Warranty Protection for your system, peace of mind for you - With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it. Battery Options for this Product APC Replacement Battery Cartridge - RBC48

This APC Replacement Battery Cartridge fits selected APC Smart-UPS and Back-UPS, restoring power back-up capacity for home offices, small businesses, and IT departments.

This replacement battery cartridge (RBC) has a lifetime of three to five years, offers safe and reliable support to the UPS, and extends the useful life of your UPS. The APC RBC comes fully assembled and includes easy-to-follow replacement instructions, making hot-swap installation simple. Purchase Replacement Battery Cartridge *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

This Product is Compatible with these Sensors APC Temperature Sensor - AP9335T
APC Temperature & Humidity Sensor - AP9335TH

The APC BR1200SI Back-UPS Pro is a high-performance uninterruptible power supply (UPS) designed to provide premium power protection for essential electronics and networked devices. With eight outlets, it ensures consistent uptime and safe operation for computers, home offices, and small business equipment during power fluctuations or outages.

Key Features of APC BR1200SI Back-UPS Pro Battery backup & surge protector outlets – Keeps critical devices running when the power supply is unstable or interrupted.
Sinewave power output* – Delivers clean, consistent power ideal for advanced systems and multimedia setups.
2 USB charging ports (Type C + Type A)* – Enables rapid charging for mobile devices and accessories.
AVR with boost and trim – Automatically regulates voltage fluctuations to maintain safe power levels.
1Gb network protection – Prevents data line surges from compromising your equipment and connection speed.
User replaceable batteries – Simplifies maintenance and extends product lifespan with easy battery replacement.
LCD interface – Provides real-time system status updates through a clear, user-friendly display.
PowerChute Personal Edition – Software for automatic system shutdown and energy management.
Reliable Power for Critical Systems Engineered for performance and stability, the APC BR1200SI Back-UPS Pro offers dependable battery backup to keep your workstations, servers, and electronics operating safely during unexpected power events.

Advanced Sinewave Technology This UPS delivers pure sinewave output to ensure smooth, uninterrupted power flow, minimizing risk of equipment damage and performance issues common with simulated wave models.

Smart Voltage Regulation The automatic voltage regulation (AVR) system enhances reliability by stabilizing voltage levels instantly, protecting devices from surges, sags, or inconsistent power supply.

Convenient USB Charging Equipped with both Type C and Type A USB ports, the Back-UPS Pro supports simultaneous high-speed charging for mobile phones, tablets, and accessories without additional adapters.

Comprehensive Network Protection Integrated Gigabit network surge protection ensures your connected equipment remains safe from surges transmitted through data cables, maintaining connection integrity and performance.

Intuitive LCD Display The LCD interface provides clear, detailed information on system performance, input voltage, and battery status, allowing users to monitor and manage power conditions effortlessly.

Simple Maintenance and Longevity Designed for user convenience, the replaceable battery system allows quick swaps, reducing downtime and maintaining system readiness for long-term use.

Product Comparison   BR1200SI BR1600SI Output Power Capacity 720W/1200VA 960W/1600VA Output Voltage / Frequency (on utility) 196 to 264 Vac Out Voltage / Frequency (on battery) 230 V ± 8%, 50/60 Hz ± 1 Hz Output Connections 8 total outlets: 6 battery backup and surge protection,
2 surge protection only Waveform Type Line Interactive / Sinewave Power Factor 0.6 Input Input Voltage / Frequency 230 V nominal, 50/60 Hz ± 3 Hz Input Cord 6 ft cord, straight plug end with IEC outlet port Surge Protection Surge Energy Rating 557 Dataline Surge Protection 1 Gb Dataline protection Overload Protection On line: 10A circuit breaker, with overload warning capability
On battery: internal current limit to overload alarm/shutdown Physical Unit Dimensions (H x W x D) mm 368 × 100 × 260 Unit Weight 11.7 kg 12.1 kg Shipping Dimensions (H x W x D) 358.6 × 223 × 482 Shipping Weight 13.35 kg 13.75 kg RBC APCRBC161 APCRBC163 Runtime (full load) 4 4 Runtime (half load) 14.2 22 Colour Black Battery Battery Type Lead acid Replacement Battery Yes Management Alarms On-battery, low battery warning,
low battery shutdown, replace battery detected Shutdown Software PCPE Software Conformance Certifications and Approvals TDC lab: TUV GS, CB 60950 & 62040
Taiwan EMC lab: TelePermit
Local Support: RCM, EAC, KETI, TISI Warranty and Equipment Protection Three-year limited warranty with a lifetime
Equipment Protection Policy up to €150.00

Battery Options for this Product APC Replacement Battery Cartridge - APCRBC161

This APC Replacement Battery Cartridge fits selected APC Smart-UPS and Back-UPS, restoring power back-up capacity for home offices, small businesses, and IT departments.

This replacement battery cartridge (RBC) has a lifetime of three to five years, offers safe and reliable support to the UPS, and extends the useful life of your UPS. The APC RBC comes fully assembled and includes easy-to-follow replacement instructions, making hot-swap installation simple. Purchase Replacement Battery Cartridge *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

The APC Back-UPS Pro series delivers reliable battery backup and surge protection for home, office, and small business use. Built with enhanced power capability and intelligent design, these UPS systems protect critical equipment and ensure consistent operation during outages and power fluctuations. With premium features such as sinewave power output, USB charging, and automatic voltage regulation, they are ideal for users who require both performance and protection.

Key Features of APC Back-UPS Pro Battery backup & surge protection outlets – Maintain safe, reliable power for essential electronics.
Sinewave power output – Ensures clean energy delivery suitable for high-end PCs and multimedia devices.
2 USB charging ports (Type C + Type A) – Provides fast, convenient charging for smartphones and tablets.
AVR with boost and trim – Automatically adjusts voltage and supports Active PFC power supplies.
1Gb network protection – Protects equipment from network surges without affecting connection speed.
User replaceable batteries – Allows quick and easy maintenance to extend product life.
LCD interface – Displays clear, real-time information on power and battery conditions.
PowerChute Personal Edition – Simplifies energy management with auto-shutdown capabilities.
Performance Overview APC Back-UPS Pro is available in four models: BR650MI, BR900MI, BR1300MI, and BR1600MI. These units provide varying capacities from 650VA to 1600VA, ensuring a tailored solution for home offices, small servers, and multimedia systems. Each unit incorporates line-interactive technology and stepped sinewave output for dependable performance.

Technical Specifications The comparison table below highlights the main technical specifications of each model, offering clear insight into output performance, connectivity, and physical design.

BR650MI BR900MI BR1300MI BR1600MI Output Power Capacity 390W/650VA 540W/900VA 780W/1300VA 960W/1600VA Output Voltage / Frequency (Utility) 196–264 Vac Output Voltage / Frequency (Battery) 230V ±8%, 50/60Hz ±1Hz Output Connections 6 battery + surge (IEC) 8 total (6 battery + surge, 2 surge-only) Waveform Type Line Interactive / Stepped Approximation to Sinewave Power Factor 0.6 Input Input Voltage / Frequency 230V nominal, 50/60Hz ±3Hz Input Cord 6 ft cord with IEC outlet port Surge Protection Surge Energy Rating 557 Joules Dataline Surge Protection 1Gb network protection Overload Protection On line: 10A circuit breaker; on battery: internal limit with alarm/shutdown Physical Unit Dimensions (H x W x D) 190x91x310 mm 100x250x382 mm Unit Weight 6.4 kg 7 kg 10.2 kg 10.9 kg Colour Black Battery Battery Type Lead Acid, User Replaceable Replacement Battery (RBC) APCRBC110 APCRBC164 APCRBC165 APCRBC166 Management Alarms On-battery, low battery, overload, replace battery warning Software PowerChute Personal Edition (PCPE) Compliance Certifications & Approvals TUV GS, CB 60950 & 62040, TelePermit, RCM, EAC, KETI, TISI
APC Warranties available for this Product APC Service Pack Warranty Extension
(New Product Purchases) FEWBEXTWAR1YR-SP-01

Purchase 1 Year Warranty FEWBEXTWAR3YR-SP-01

Purchase 3 Year Warranty APC Service Pack Warranty Extension
(Renewal or High Volume) FEWEXTWAR1YR-SP-01

Purchase 1 Year Warranty FEWEXTWAR3YR-SP-01

Purchase 3 Year Warranty Protection for your system, peace of mind for you - With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it. Battery Options for this Product APC Replacement Battery Cartridge - APCRBC165

This APC Replacement Battery Cartridge fits selected APC Smart-UPS and Back-UPS, restoring power back-up capacity for home offices, small businesses, and IT departments.

This replacement battery cartridge (RBC) has a lifetime of three to five years, offers safe and reliable support to the UPS, and extends the useful life of your UPS. The APC RBC comes fully assembled and includes easy-to-follow replacement instructions, making hot-swap installation simple. Purchase Replacement Battery Cartridge *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

CyberPower OR1000ERM1U Line-Interactive UPS offers Simulated Sine Wave output power for office system devices including PCs, workstations, networking devices, and peripherals. It’s typically integrated in the back office and server room environment to ensure a reliable backup power supply during power failures.

The UPS has a multifunction LCD display which offers real-time information, including input and output voltage levels, load and battery levels, battery runtime, overload warning, and a silent mode. With the network ports on the UPS, it prevents network devices from being subjected to sudden power surges caused by lightning, thereby avoiding potential system damage. As for battery maintenance, the UPS allows battery hot-swapping, which enables users to perform normal battery maintenance without significant interruption.

Specifications

VA Watts Output Voltage
(Vac) Half Load Runtime
(min) Outlets 1000 600 230 ± 10% 14 IEC C13 x 6 Main Features

Energy Saving Technology

LCD Status Display

  Hot-swappable Batteries

Overload Protection

  Line-interactive UPS Topology

Simulated Sine Wave Output

Overload Protection

Surge and Spike Protection

Phone/Fax/Modem/DSL/Network Protection

USB Connectivity Port

SNMP/HTTP Remote Management Capability (Optional)

Energy Saving Technology

Automatic Voltage Regulation (AVR)

Hot-swappable Batteries

EMI and RFI Filtration

LCD Status Display

PowerPanel Management Software

  Box Contents

1. OR1000ERM1U UPS

2. Rackmount Ears

3. Power Cord

4. USB Cable

5. User's Manual

  * Product contents may vary according to different regions. For detailed information, please refer to user's manual/quick start guide.

The Eaton Ellipse PRO 1600 1600VA is a line interactive UPS specifically developed to protect workstations running demanding applications. The Ellipse PRO features a LCD display for real time status and measurements, 8 outlets ( 4 with battery backup and lightning protection and 4 with lightning protection). This unit includes Eco Control power outlets, which enable energy savings up to 20 percent and Advanced Surge Reduction (ASR) that complies fully with the requirements of the IEC 616431-1 standard. This UPS can be either placed as a tower, in a rack or be wall mounted. Key Features Protects data connections such as Ethernet, internet and telephone lines
USB port & Eaton UPS Companion software that enables safe system shutdown, energy usage metering and easy configuration of UPS settings
Convenient extra-flat design for easy installation in any office environment
Includes a high performance surge-protection device which complies with IEC 61643-1 standard
EcoControl function helps you save up to 20% energy compared to previous generation UPSs
Three-year warranty including batteries.
Unlimited warranty for connected computer equipment
Battery tests itself automatically at regular intervals, ensuring early detection when it’s time for replacement.
Easy-to-replace battery helps to extend UPS service life




4 sockets with surge protection and backup
4 sockets with surge protection
2 EcoControl sockets
Telephone, internet and Ethernet protection
USB port
Replaceable batteries

Eaton 5SC UPS provides line-interactive, affordable and reliable protection for small business servers. It includes a LCD interface for real time status and measurement. This unit also possesses the Advanced Battery Management (ABM) technology that increases battery lifetime. It is line interactive with Automatic Voltage Regulation (AVR). With its 8 IEC outputs and compact design the 5SC fits anywhere easily.
Key Features LCD interface clearly shows key information
Sinewave output for compatibility with today’s small business servers
Compact design for easy integration even with space constraints (kiosks, cash machines, ticket machines etc.) and up to eight outlets for better flexibility
Reliable, long-lasting UPS with patented ABM technology that increases battery service life by up to 50%
Eaton Intelligent Power software delivered as standard is compatible with all major operating systems

The APC SMC1000IC Smart-UPS Desktop Uninterruptible Power Supply is an intelligent and efficient network power protection device designed for entry-level to scalable runtime equipment. This UPS is ideal for servers, point-of-sale systems, routers, switches, hubs, and other network devices.

Application-optimized models are ideal for entry-level servers, point-of-sale setups, and other small network devices.

The award-winning APC SMC1000IC is an affordable true sine-wave UPS in the Smart-UPS family. A 600W / 1000VA unit designed for entry-level servers and network equipment, it is fully compatible with today’s active power factor corrected (PFC) power supplies.




Key Features First of its kind: APC SmartConnect makes Connected Smart-UPS the first cloud-enabled UPS for distributed IT.
Expert advice: Provides proactive UPS lifecycle recommendations to help maximize lifespan.
Accessible anywhere: The SmartConnect web portal is viewable from any internet-connected device.
Standard inclusion: SmartConnect comes standard on select models, ideal for cost-conscious professionals needing reliable protection.
Seamless integration: Integrates easily with leading remote monitoring and management platforms for unified oversight.
Secure, remote monitoring

Monitor your UPS remotely through a secure web portal, ensuring constant awareness of your power infrastructure.

Pro-active lifecycle alerts

Extend UPS life and protect investments with alerts for firmware upgrades and device maintenance.

Cloud enabled as standard

Smart-UPS models come cloud-enabled with built-in Ethernet ports for effortless online monitoring.

Trusted to protect critical data and equipment from power disruptions by supplying clean and reliable network-grade power. In addition to exceptional reliability and management features, Smart-UPS units deliver high efficiency at varying load levels—ideal for today’s multi-core or virtualized servers.

Included PowerChute Business Edition software supports major server operating systems and enables UPS management with safe system shutdown.

Main Features Cold-start capable: Provides temporary battery power when utility power is unavailable.
Green mode: Bypasses unused electrical components to maximize efficiency without compromising protection.
High online efficiency: Reduces utility costs and heat output.
LCD Status Display: Offers key UPS information at a glance with load and battery bar graphs.
Pure sine wave output: Simulates utility power for optimal compatibility with sensitive electronics.
Temperature-compensated charging: Regulates charge voltage based on battery temperature to extend lifespan.
Product Features:

LCD Display: Intuitive interface provides clear status information.
Communication Ports: Includes USB and serial ports for UPS management.
8 Surge and UPS Protected Outlets
Safety-agency approved: Tested and certified to national standards.
Battery disconnect: Convenient for safe transport.
Push Button Circuit Breaker: Easy recovery from overloads; protects electronics from damage.
Pure Sine-Wave Output: Delivers clean, stable power for sensitive devices.
Advanced Battery Management: Temperature-compensated charging extends battery life.
High Efficiency Green Mode: Reduces energy use and promotes longer component life.
Network Grade Power Conditioning: Offers voltage regulation, surge protection, and noise filtering.
APC Smart-UPS C Display LCD Display Screen: Comprehensive status overview with indicators for online, battery, green mode, load, and charge levels.
Status Measurements: Displays input/output voltage, load in Watts/VA/%, output current, frequency, and battery runtime.
On Line/On Battery Indicator: LED shows green for utility power, orange for battery mode.
On/Off Button
System Fault LED: Illuminates during a system fault with error details.
Mute Button: Silences audible alarms.
Display Button: Scrolls through measurement screens and selects default view.
APC Warranties available for this Product APC Service Pack Warranty Extension
(New Product Purchases) FEWBEXTWAR1YR-SP-02

Purchase 1 Year Warranty FEWBEXTWAR3YR-SP-02

Purchase 3 Year Warranty APC Service Pack Warranty Extension
(Renewal or High Volume) FEWEXTWAR1YR-SP-02

Purchase 1 Year Warranty FEWEXTWAR3YR-SP-02

Purchase 3 Year Warranty Protection for your system, peace of mind for you - With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it. Battery Options for this Product APC Replacement Battery Cartridge - RBC142

This APC Replacement Battery Cartridge fits selected APC Smart-UPS and Back-UPS, restoring power back-up capacity for home offices, small businesses, and IT departments.

This replacement battery cartridge (RBC) has a lifetime of three to five years, offers safe and reliable support to the UPS, and extends the useful life of your UPS. The APC RBC comes fully assembled and includes easy-to-follow replacement instructions, making hot-swap installation simple. Purchase Replacement Battery Cartridge *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

This Product is Compatible with these Mounting Products Rack Mount, Kit, NetBotz, Rack Mounting Bracket - NBAC0302

CyberPower OR1500ERM1U Line-Interactive UPS offers Simulated Sine Wave output power for office system devices including PCs, workstations, networking devices, and peripherals. It's typically integrated in the back office and server room environment to ensure a reliable backup power supply during power failures.

The UPS has a multifunction LCD display which offers real-time information, including input and output voltage levels, load and battery levels, battery runtime, overload warning, and a silent mode. With the network ports on the UPS, it prevents network devices from being subjected to sudden power surges caused by lightning, thereby avoiding potential system damage. As for battery maintenance, the UPS allows battery hot-swapping, which enables users to perform normal battery maintenance without significant interruption.

Specifications

VA Watts Output Voltage
(Vac) Half Load Runtime
(min) Outlets 1500 900 230 ± 10% 11 IEC C13 x 6 Main Features

Energy Saving Technology

LCD Status Display

  Hot-swappable Batteries

Overload Protection

  Line-interactive UPS Topology

Simulated Sine Wave Output

Overload Protection

Surge and Spike Protection

Phone/Fax/Modem/DSL/Network Protection

USB Connectivity Port

SNMP/HTTP Remote Management Capability (Optional)

Energy Saving Technology

Automatic Voltage Regulation (AVR)

Hot-swappable Batteries

EMI and RFI Filtration

LCD Status Display

PowerPanel Management Software

  Box Contents

1. OR1500ERM1U UPS

2. Rackmount Ears

3. Power Cord

4. USB Cable

5. User's Manual

  * Product contents may vary according to different regions. For detailed information, please refer to user's manual/quick start guide.

Overview

The Vertiv™ EDGE-1500IRT2UXL, in 2U rack and tower formats, offers 1500VA/1350W of backup power protection for server and networking equipment. Featuring a high 0.9 power factor, controllable outlets, and extended runtime cabinets, Vertiv EDGE is a cost-effective choice for distributed and edge IT applications.


Features
High output PF=0.9 to maximize available power and protect more equipment


1U, 2U, 3U, tower, rack/tower form factors, with power ratings from 500VA to 3000VA, to address a broad range of power requirements


Color graphic LCD display


Add up to 6 extended run battery cabinets to increase runtime


"Green mode" operation: in battery mode with small loads, the UPS will automatically shut down to protect batteries, optimize energy savings


Programmable outlets to disable non-critical loads, optimize battery runtime


Smart fan speed control for lower audible noise


RoHS and REACH compliant 
High efficiency, up to 98% in line mode, to deliver energy savings


Advanced AVR protection with 2x boost and 1x buck tap to protect the battery by smoothing out spikes, sags and brownouts


External battery cabinets with auto-detection


Rack/tower 3kVA model with short depth for flexible installation


Remote connectivity via network interface or serial connection to monitor power consumption and configure user-defined alert notifications to prevent downtime


Input breaker device for additional protection to the load in worst case failures


Extend battery life with deep discharge protection
  Product Diagram

USB Port
Output receptacles
Programmable output group
Input power socket
Input circuit breaker
Emergency Power Off (EPO) connector
Vertiv™ Intellislot® Port for optional management cards
Earth terminal
External battery cabinet connection
Automatic battery detection connector
Technical Specifications Power Rating 1500VA / 1350W Input Voltage 230V AC Output Voltage 200 / 208 / 220 / 230 / 240 VAC Efficiency 98% Wiring Input: IEC C14 Output: 3+3 x IEC C13 Interface Options USB & Slot for optional cards Control Panel LCD Display Operating Temperature 0 - 40ºC Listings CE, CB Topology Line interactive (pure sinewave)

The APC Back-UPS Pro series provides dependable battery backup and surge protection, ideal for home, home office, or small business environments. Designed for reliability, these models feature enhanced power capacity and extended runtime to protect critical electronics from unexpected power interruptions.

The new Back-UPS Pro lineup is built with premium functionality, offering clean sinewave power output, automatic voltage regulation, and intelligent management tools for optimal performance and device safety.

Key Features of APC Back-UPS Pro Battery Backup & Surge Protection: Keeps essential devices running safely during power disturbances.
Sinewave Power Output*: Maintains consistent, high-quality power ideal for advanced workstations, multimedia devices, and storage systems.
Dual USB Charging (Type-C + Type-A)*: Fast charging for smartphones, tablets, and other mobile devices.
Automatic Voltage Regulation (AVR): Instantly stabilizes voltage fluctuations and supports Active Power Factor Correction (PFC).
1Gb Network Protection: Prevents surges transmitted through data lines without reducing internet speed.
User-Replaceable Batteries: Enables quick and easy battery replacement to extend UPS lifespan.
LCD Display: Provides real-time information about power status, load levels, and battery health.
PowerChute Personal Edition: Auto-shutdown and power management software for streamlined control.
Product Comparison BR1200SI BR1600SI Output Power Capacity720W / 1200VA960W / 1600VA Output Voltage / Frequency (Utility)196–264 V AC Output Voltage / Frequency (Battery)230 V ±8%, 50/60 Hz ±1 Hz Output Connections8 outlets: 6 battery + surge / 2 surge only Waveform TypeLine Interactive / Sinewave Power Factor0.6 Input Input Voltage / Frequency230 V nominal, 50/60 Hz ±3 Hz Input Cord6 ft cord, straight plug with IEC outlet Surge Protection Surge Energy Rating557 Joules Dataline Surge Protection1 Gb Data Line Protection Overload Protection10A circuit breaker (online), internal limit (battery mode) Physical Dimensions (H x W x D)368 × 100 × 260 mm Weight11.7 kg12.1 kg Shipping Dimensions358.6 × 223 × 482 mm Shipping Weight13.35 kg13.75 kg RBCAPCRBC161APCRBC163 Runtime (Full Load)4 min4 min Runtime (Half Load)14.2 min22 min ColourBlack Battery Battery TypeSealed Lead Acid Replaceable BatteryYes Management AlarmsOn-battery, low battery, replace battery alert Shutdown SoftwarePowerChute Personal Edition Conformance Certifications & ApprovalsTUV GS, CB 60950 & 62040, TelePermit, RCM, EAC, KETI, TISI APC Warranties available for this Product APC Service Pack Warranty Extension
(New Product Purchases) FEWBEXTWAR1YR-SP-01

Purchase 1 Year Warranty FEWBEXTWAR3YR-SP-01

Purchase 3 Year Warranty APC Service Pack Warranty Extension
(Renewal or High Volume) FEWEXTWAR1YR-SP-01

Purchase 1 Year Warranty FEWEXTWAR3YR-SP-01

Purchase 3 Year Warranty Protection for your system, peace of mind for you - With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it.

APC’s SMT1000IC is part of the award-winning Smart-UPS family — the most popular UPS in the world for servers, storage, and networks.

The latest generation of Smart-UPS™ introduces a new level of connectivity and adaptability. APC™ SmartConnect enables customers to monitor their UPS status through a secure web portal. This innovative remote management feature provides automatic notifications, firmware updates, and advanced remote access. With SmartConnect, users gain straightforward network connectivity, valuable system insights, and added peace of mind.


Key Features of APC SmartConnect First of its kind: SmartConnect makes Connected Smart-UPS the first cloud-enabled UPS for distributed IT environments.
Expert advice: Provides proactive lifecycle recommendations to help maximize UPS lifespan.
Accessible anywhere: Manage UPS systems through the SmartConnect web portal from any internet-connected device.
Included by default: SmartConnect is standard on select Smart-UPS models, offering affordable and reliable power protection.
Seamless integration: Easily integrates with leading remote monitoring and management platforms for centralized portfolio control.
Secure, remote monitoring

Connected Smart-UPS systems offer remote monitoring through a secure web portal, keeping you informed about your power infrastructure’s status at all times.

Pro-active lifecycle alerts

Receive proactive alerts for firmware upgrades, device maintenance, and service reminders to extend the life of your UPS investment.

Cloud enabled as standard

New Smart-UPS models are cloud-ready with built-in Ethernet ports, simplifying online monitoring and management.

Trusted Power Protection Smart-UPS systems safeguard critical data and equipment from power disturbances with clean, reliable network-grade power. Combining legendary reliability with efficient power delivery, these units perform exceptionally well across all load levels — ideal for today’s multi-core or virtualized servers with variable power needs.

The included PowerChute Business Edition software supports all major server operating systems, ensuring smooth UPS management and automated safe system shutdown when necessary.

Main Features Cold-start capable: Provides temporary battery power when utility power is unavailable.
Green mode: A patent-pending mode that increases efficiency by bypassing unused electrical components during stable power conditions.
High online efficiency: Reduces utility costs and heat output while maintaining optimal protection.
LCD Status Display: Offers key UPS data at a glance with multiple status indicators and battery/load bar graphs.
Pure sine wave output on battery: Ensures compatibility with active PFC servers and sensitive electronics.
Temperature-compensated battery charging: Extends battery life by adjusting voltage based on temperature.
Product Features Alphanumeric LCD: Intuitive interface provides accurate system data and configuration options.
Communication Ports: Equipped with Serial, USB, and SmartSlot™ connectivity.
8 IEC320 C13 Outlets: Supports multiple devices with dependable power distribution.
Battery Disconnect: Enables quick and safe battery disconnection for transport.
Push Button Circuit Breaker: Allows fast recovery from overloads and safeguards electrical systems.
Network-Grade Power: Delivers clean, regulated power with AVR and surge protection.
High Efficiency Green Mode: Reduces power usage and heat generation for longer component life.
Advanced Battery Management: Temperature-compensated charging and smart algorithms extend battery performance.
APC Smart-UPS C Display Intuitive, easy-to-use LCD interface: Offers detailed system information in simple or advanced menu views.

Power Status Operating mode and efficiency
Load VA/Watts/Amps
Input/Output voltage and frequency
Battery capacity and runtime
Energy meter readings
Control and Settings Manage UPS and outlet groups, configure language, power quality, alarms, delay thresholds, and more.

Diagnostics and Logs Initiate battery and runtime calibration tests, review fault logs, and track transfer history for insights and maintenance.

Additional Interface Features Online status indicators: LED alerts for online, on-battery, fault, and replace battery status.
Navigation Arrows: For adjusting settings efficiently.
Escape and Return: Quick navigation through interface menus.
About: Displays UPS serial, battery part numbers, and recommended replacement dates.
APC Warranties available for this Product APC Service Pack Warranty Extension
(New Product Purchases) FEWBEXTWAR1YR-SP-02

Purchase 1 Year Warranty FEWBEXTWAR3YR-SP-02

Purchase 3 Year Warranty APC Service Pack Warranty Extension
(Renewal or High Volume) FEWEXTWAR1YR-SP-02

Purchase 1 Year Warranty FEWEXTWAR3YR-SP-02

Purchase 3 Year Warranty Protection for your system, peace of mind for you - With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it. Battery Options for this Product APC Replacement Battery Cartridge - RBC6

This APC Replacement Battery Cartridge fits selected APC Smart-UPS and Back-UPS, restoring power back-up capacity for home offices, small businesses, and IT departments.

This replacement battery cartridge (RBC) has a lifetime of three to five years, offers safe and reliable support to the UPS, and extends the useful life of your UPS. The APC RBC comes fully assembled and includes easy-to-follow replacement instructions, making hot-swap installation simple. Purchase Replacement Battery Cartridge *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

This Product is Compatible with these Sensors APC Temperature Sensor, 13 ft - AP9335T
APC Temperature & Humidity Sensor - AP9335TH

Ideal for protecting Rack/Tower Servers, NAS, Network Equipment, ATMs, Ticket Machines and Kiosks

Affordable protection for servers and networking systems

The Eaton 5SC UPS provides line-interactive, affordable and reliable protection for small business server in any kind of installation constraints. Complementing our range of industry leading UPSs, the 5SC includes an LCD interface for real-time status and measurements, implements manageability solutions compatible with most of IT platforms and provides sinewave output for compatibility with most sensitive IT equipments.

Manageability

The LCD interface provides clear status of the UPS key parameters such as input and output voltage, load and battery level, and estimated runtime. Essential configuration capabilities are also offered for output voltage, audible alarm and sensitivity.

The 5SC offers USB and serial connectivity. USB port is HID compliant for automatic integration into Windows, Mac OS and Linux.

A slot for an optional communication card (including SNMP/ Web card or relay contact card) is available on rack and R/T models.

Eaton’s Intelligent Power® Software Suite insures compatibility with all major OS including virtualization software.

Reliability

Pure sinewave output: When operating in battery mode the 5SC provides a high quality output signal for any sensitive equipment connected, such as active PFC (power factor corrected) servers.

Buck and Boost operation corrects a wide range of input voltage variations through continuous regulation, without the use of batteries.

Stronger, longer battery life: Eaton ABM® battery management technology uses an innovative three-stage charging system that extends battery life by up to 50%.

Flexibility

Rack models are designed to fit into short depth wall enclosures down to 500mm, 2 post racks or to be wall mounted.

R/T models authorizes either tower or rack installation - pedestals and rail kits are included with all models at no extra charge.

Tower models small size for easy integration even with space constraints (kiosks, cash machines, ticket machines etc.) and up to nine outlets for better flexibility!

Easy battery replacement from front panel to extend UPS life.

Please see the Eaton 5SC Technical Specification for detailed battery and physical information

CyberPower PR1500ELCD Line-Interactive UPS, with seamless Pure Sine Wave, provides the best power protection available for office system devices including PCs, workstations, networking devices, and peripherals. It's typically integrated in the back office, server room, and data center environment.

The UPS can be locally managed via USB or serial ports, or remotely managed via an SNMP Card (an optional Remote Management Card), allowing administrators and users unsurpassed flexibility to remotely access each UPS through the network to perform real-time monitoring, UPS configurations, and scheduled system shutdowns by using PowerPanel Management software.

Specifications

VA Watts Output Voltage
(Vac) Half Load Runtime
(min) Outlets 1500 1350 230 ± 5% 17 IEC C13 x 8 Main Features

Energy Saving Technology

Pure Sine Wave Output

  LCD Status Display

Hot-swappable Batteries

  Line-interactive UPS Topology

Active PFC Compatible

Automatic Voltage Regulation (AVR)

Critical/Non-critical Load Outlets

Surge and Spike Protection

LCD Status Display

USB Connectivity Port

PowerPanel Management Software

Tower Form Factor

Energy Saving Technology

Pure Sine Wave Output

Overload Protection

Hot-swappable Batteries

EMI and RFI Filtration

Detachable LCD Panel

Emergency Power Off (EPO) Port

SNMP/HTTP Remote Management Capability (Optional)

  Box Contents

1. PR1500ELCD UPS

2. Power Cord

3. USB Cable

  4. Serial Cable

5. EPO Cable

6. User's Manual

  * Product contents may vary according to different regions. For detailed information, please refer to user's manual/quick start guide.

APC’s SMT750RMI2UC is part of the award-winning Smart-UPS family—the world’s most trusted UPS line for servers, storage, and networks. This rackmountable 500W / 750VA true sine-wave UPS is designed for entry-level servers and network equipment, offering compatibility with today’s active power factor corrected (PFC) power supplies.

Introducing APC SmartConnect – The Next Generation of Smart-UPS Smart-UPS™ with APC SmartConnect introduces cloud-enabled monitoring for simplified management. This secure web portal allows users to track UPS status, receive notifications, perform firmware updates, and access advanced remote support—all designed for convenience and assurance.

Key Features of APC SmartConnect First of its kind: The first cloud-enabled UPS for distributed IT environments.
Expert recommendations: Receive proactive lifecycle guidance to maximize UPS lifespan.
Anytime access: Monitor your UPS from any internet-connected device.
Standard feature: SmartConnect comes pre-enabled on select Smart-UPS models.
Seamless integration: Compatible with leading remote monitoring and management platforms.
Secure, Remote Monitoring
Stay informed about your UPS status through APC’s secure web portal.

Proactive Lifecycle Alerts
Receive maintenance, firmware, and performance notifications to extend product life.

Cloud Enabled as Standard
Built-in ethernet for quick, cost-effective cloud connectivity.

Trusted worldwide for protecting critical data and equipment, Smart-UPS delivers clean, reliable, network-grade power. High efficiency at varying load levels makes it ideal for modern multi-core and virtualized servers. The included PowerChute Business Edition software ensures safe system shutdown and comprehensive UPS management across major server operating systems.

Main Features Cold-start capable: Provides temporary battery power during outages.
Green mode: Optimized efficiency by bypassing unused components during stable conditions.
High online efficiency: Reduces power costs and heat output.
LCD Status Display: Offers real-time load, battery, and efficiency metrics.
Pure sine wave output: Ensures maximum compatibility with sensitive and PFC-powered devices.
Temperature-compensated charging: Extends battery life through intelligent voltage regulation.

1. Alphanumeric LCD: Intuitive local interface providing clear UPS information and configuration options.

2. Communication Ports: Serial, USB, and SmartSlot™ for additional connectivity.

3. 4 x IEC320 C13 Outlets

4. Push Button Circuit Breaker: Enables fast recovery from overloads.

Network Grade Power Conditioning: Provides voltage regulation, noise filtering, and surge protection.

Advanced Battery Management: Intelligent temperature-compensated charging for extended battery life.

High Efficiency Green Mode: Reduces energy costs and heat for long-term reliability.

APC Smart-UPS C Display Interface Intuitive LCD Interface: Provides detailed UPS information with basic and advanced menu options.

Power Status Includes:

Operating mode and efficiency
Load VA/Watts/Amps
Input/Output voltage and frequency
Battery capacity and runtime
Energy meter and more
Control: Configure UPS and outlet settings.

Diagnostics & Logs: Run battery tests and review the last 10 events.

Status Indicators: Online, on battery, fault, and replace battery LEDs for quick identification.

Navigation: Intuitive menu system with arrows, escape, and return controls.

APC UPS Network Management Card 2 The APC UPS Network Management Card 2 enables secure remote monitoring and control of UPS units via web browser, command line, or SNMP. Its robust security and notification capabilities ensure timely alerts and reliable management.

Main Features Command Line Interface: Manage remotely via Telnet or SSH.
SmartSlot Compatible: Works with all SmartSlot-enabled UPS units.
IPv6 Support: Operates seamlessly on IPv6 networks.
Standard UPS RFC 1628 MIB: Enables SNMP-based UPS data integration.
Device Encryption: Secured access via HTTPS/SSL, SSH, and SNMPv3.
Multi-user Access: Supports up to 8 concurrent browser users and 3 CLI users.
Remote Firmware Updates: Simplify UPS firmware upgrades through a web interface.
Smart Battery Management: Provides detailed battery data and proactive fault analysis (SRT only).
Modbus TCP Support: Integrates with building management and third-party monitoring systems.
APC Warranties available for this Product APC Service Pack Warranty Extension
(New Product Purchases) FEWBEXTWAR1YR-SP-02

Purchase 1 Year Warranty FEWBEXTWAR3YR-SP-02

Purchase 3 Year Warranty APC Service Pack Warranty Extension
(Renewal or High Volume) FEWEXTWAR1YR-SP-02

Purchase 1 Year Warranty FEWEXTWAR3YR-SP-02

Purchase 3 Year Warranty Protection for your system, peace of mind for you - With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it. Battery Options for this Product APC Replacement Battery Cartridge - RBC123

This APC Replacement Battery Cartridge fits selected APC Smart-UPS and Back-UPS, restoring power back-up capacity for home offices, small businesses, and IT departments.

This replacement battery cartridge (RBC) has a lifetime of three to five years, offers safe and reliable support to the UPS, and extends the useful life of your UPS. The APC RBC comes fully assembled and includes easy-to-follow replacement instructions, making hot-swap installation simple. Purchase Replacement Battery Cartridge *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

This Product is Compatible with these Mounting Products APC 2-Post Mounting Kit for Smart-UPS and Symmetra - AP9625
This Product is Compatible with these Sensors APC Temperature Sensor - AP9335T
APC Temperature & Humidity Sensor - AP9335TH

CyberPower PR1000ERT2U with rackmount design guarantees power backup protection for home theater systems, multimedia devices, IT equipment, computers, workstations, NAS/Storage devices, telecom devices, networking devices, and surveillance systems. The UPS adopts line-interactive topology with Automatic Voltage Regulation (AVR) function, and offers stabilized Pure Sine Wave output to ensure high power quality.

The UPS's output power factor is 1, which means it is capable of connecting to more critical loads than conventional UPS. It also features Battery Management Technology to help batteries obtain optimal life span by balancing battery string voltage. Two-phase battery charging can charge the battery quickly and safely. The hot-swappable battery packs allow for easy maintenance without power interruption. Its multi-functional matrix LCD supports intuitive operation and quick configuration. The LCD panel is also rotatable to meet installation requirements.

Specifications

VA Watts Output Voltage
(Vac) Half Load Runtime
(min) Outlets 1000 1000 220 ± 5%
230 ± 5%
240 ± 5% 21 IEC C13 x 10 Main Features

Energy Saving Technology

Pure Sine Wave Output

  LCD Status Display

Hot-swappable Batteries

  Line-interactive UPS Topology

Active PFC Compatible

Toolless Battery Replacement

High Output Power Factor

Overload Protection

Quick Charging Technology

Surge and Spike Protection

LCD Status Display

Serial Connectivity Port

PowerPanel Management Software

Rack/Tower Convertible Configurations

Energy Saving Technology

Pure Sine Wave Output

Battery Management Technology

Automatic Voltage Regulation (AVR)

Critical/Non-critical Load Outlets

Hot-swappable Batteries

EMI and RFI Filtration

USB Connectivity Port

Emergency Power Off (EPO) Port

SNMP/HTTP Remote Management Capability (Optional)

  Box Contents

1. PR1000ERT2U UPS

2. Rackmount Rail

3. Rackmount Ears

4. USB Cable

  5. Serial Cable

6. EPO Cable

7. User's Manual

  * Product contents may vary according to different regions. For detailed information, please refer to user's manual/quick start guide.

SurgeX Large Format uninterruptible power supplies guarantee a reliable, efficient and cost-effective solution for powering mission critical equipment. They regenerate AC power via true online double-conversion technology coupled with an isolation transformer to entirely re-establish the neutral to ground bond. Unique to the industry, this combination eradicates harmonics and common mode noise to guarantee optimum performance and reliability. Offering a better experience for end users and less service calls for integrators.

Key Features:



1000VA Output Wattage
Online double conversion technology
Low impedance isolation transformer
Low Input TDH
Static bypass switch
Inrush load rating up to 300%
Voltage conversion capability
Generator compatibility
Expandable battery packs
Impressive 0.9 output power factor
Multiple control options including SNMP
Industry leading -30%/+15% voltage range
UL listed and CE marked


Specifications:



Committed To Custom - Yes
Type - UPS Battery Backup
Range - UPS Standalone
Number Of Receptacles - 8
Receptacle Type - IEC C13
Load Rating - 20A
Rack Space - 2U
Warranty - 5 Year

APC’s SMX750I is part of the award winning Smart-UPS family which is the most popular UPS in the world for servers, storage and networks.

The 600W 750VA extended runtime UPS is trusted to protect critical data and equipment from power problems, and supplies clean and reliable network-grade power. In addition to legendary reliability and manageability, Smart-UPS units have extremely high efficiency at low, medium and high load levels, making them ideal for today’s multi-core or virtualized servers that have varying load consumption.






Product Features:

1. Alphanumeric LCD (Liquid Crystal Display) Intuitive interface provides detailed and accurate information with the ability to configure locally.

2. Communication Ports: Serial, USB, and SmartSlot™ for accessory cards.

3. 8 IEC320 C13 Outlets in 1 Group

4. Push Button Circuit Breaker enables quick recovery from overloads.

5. Emergency Power Off (EPO): Provides for remote UPS shut-off in the event of a fire or other emergency

6. Network-grade Power: Provides most stable power conditions by filtering noise, automatic voltage regulation (AVR), and surge protection.

7. High Efficiency Green Mode: Saves utility costs and reduces heat promoting longer component life.

8. Advanced Battery Management: Temperature-compensated charging extends life and advanced algorithms recommend replacement date

Additional Features:

1. Slim 2U Rack/Tower Convertible Form: Display rotates easily for use in or out of a rack.

2. High-frequency Design: Reduces size of (or eliminates) bulky transformers making installation even easier.

3. Smart External Battery Connector: Accept external batteries and increases runtime automatically to increase availability.

APC Warranties available for this UPS APC Service Pack Warranty Extension
(New Product Purchases) FEWBEXTWAR1YR-SP-02

Purchase 1 Year Warranty FEWBEXTWAR3YR-SP-02

Purchase 3 Year Warranty APC Service Pack Warranty Extension
(Renewal or High Volume) FEWEXTWAR1YR-SP-02

Purchase 1 Year Warranty FEWEXTWAR3YR-SP-02

Purchase 3 Year Warranty Protection for your system, peace of mind for you - With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it. Replacement Battery Options for this UPS APC Replacement Battery Cartridge - FEAPCRBC116

This APC Replacement Battery Cartridge fits selected APC Smart-UPS and Back-UPS, restoring power back-up capacity for home offices, small businesses, and IT departments.

This replacement battery cartridge (RBC) has a lifetime of three to five years, offers safe and reliable support to the UPS, and extends the useful life of your UPS. The APC RBC comes fully assembled and includes easy-to-follow replacement instructions, making hot-swap installation simple. Purchase Replacement Battery Cartridge *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

External Battery Pack for this UPS APC UPS External Battery Pack - FESMX48RMBP2U

The APC Extended Run Battery Pack is the ideal companion for the APC Back-UPS Pro UPS (uninterruptible power supply).

The battery pack increases the duration of time that you can protect your electronic devices from damage and disconnect due to unexpected blackouts, voltage fluctuations, and other power disruptions. Purchase External Battery Pack *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

APC award winning Rackmountable SMC1000I-2UC is an affordable true sine-wave UPS in the Smart-UPS family. A 600w 1000va UPS designed for entry level servers and network equipment, it is compatible with today’s active power factor corrected (PFC) power supplies.



The next generation of Smart-UPS™ now boast an ingenious connectivity feature that makes Smart-UPS even more adaptable and easier to deploy. APC™ SmartConnect allows customers to view the status of their UPS through a secure web portal, receive automatic notifications, firmware updates, and advanced support — ensuring dependable management and peace of mind.

Key Features First of its kind: The APC SmartConnect feature makes Connected Smart-UPS the first cloud enabled UPS for distributed IT.
Advice from the experts: Provides proactive UPS lifecycle recommendations to help maximise lifespan.
Accessibility: The SmartConnect web portal is accessible from any internet connected device.
Enabled as a standard: SmartConnect comes standard on select Smart-UPS models — ideal for cost-conscious professionals.
Seamless integration: Easily integrates with leading remote monitoring and management platforms.
Secure, remote monitoring

Connected Smart-UPS units support remote monitoring through a secure web portal, ensuring you’re always informed.

Pro-active lifecycle alerts

Receive alerts for firmware upgrades, device maintenance, and protection updates to extend UPS lifespan.

Cloud enabled as standard

All new Smart-UPS models include built-in Ethernet for quick and simple online monitoring.

Trusted to protect critical data and equipment from power issues by supplying clean and reliable network-grade power. Smart-UPS units deliver high efficiency across varying loads — ideal for modern, multi-core or virtualised servers.

PowerChute Business Edition software provides UPS management and controlled system shutdown for all major server operating systems.



Main Features Cold-start capable - Provides temporary battery power when utility power is out.
Green mode - Achieves high efficiency by bypassing unused electrical components during stable conditions.
High online efficiency - Reduces utility costs and heat output.
LCD Status Display - Offers load and battery bar graphs with key UPS status indicators.
Pure sine wave output - Provides compatibility with active PFC servers and sensitive electronics.
Temperature-compensated charging - Extends battery life with intelligent charge regulation.
LCD (Liquid Crystal Display) - Intuitive interface provides comprehensive status at a glance.
Communication Ports - USB and serial ports for UPS management.
4 x Surge and UPS Protected Outlets
Safety-agency approved - Tested and certified to national standards.
Network Grade Power Conditioning - Features voltage regulation, noise filtering, and surge protection.
Push Button Circuit Breaker - Enables quick recovery from overloads.
Pure Sine-Wave Output - Simulates utility power for optimal compatibility.
Advanced battery management - Temperature-compensated charging for extended battery life.
High Efficiency Green Mode - Lowers energy costs and reduces thermal output.
APC Smart-UPS C Display LCD Display Screen - Comprehensive status at a glance Status Conditions: Online, On battery, Green mode, Load graph, Battery charge graph, Audible alarm
Measures: Input & Output voltage, Load (Watts, VA, Percent), Output current/frequency, Event counter, Estimated runtime

On Line/On Battery - LED glows green for utility power and orange for battery power.
On/Off Button
System Fault LED - Illuminates during system faults with error display.
Mute Button - Silences alarms.
Display Button - Cycles measurement screens and selects the default display view.
APC Warranties available for this Product APC Service Pack Warranty Extension
(New Product Purchases) FEWBEXTWAR1YR-SP-02

Purchase 1 Year Warranty FEWBEXTWAR3YR-SP-02

Purchase 3 Year Warranty APC Service Pack Warranty Extension
(Renewal or High Volume) FEWEXTWAR1YR-SP-02

Purchase 1 Year Warranty FEWEXTWAR3YR-SP-02

Purchase 3 Year Warranty Protection for your system, peace of mind for you - With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it. Battery Options for this Product APC Replacement Battery Cartridge - RBC142

This APC Replacement Battery Cartridge fits selected APC Smart-UPS and Back-UPS, restoring power back-up capacity for home offices, small businesses, and IT departments.

This replacement battery cartridge (RBC) has a lifetime of three to five years, offers safe and reliable support to the UPS, and extends the useful life of your UPS. The APC RBC comes fully assembled and includes easy-to-follow replacement instructions, making hot-swap installation simple. Purchase Replacement Battery Cartridge This Product is Compatible with these Mounting Products APC AP9625 2-Post Mounting Kit for Smart-UPS and Symmetra - AP9625
Rack Mounting Bracket for NetBotz Camera Pod 160 - NBAC0302

The APC SMC1500IC Smart-UPS Desktop Uninterruptible Power Supply provides intelligent and efficient network power protection from entry level to scalable runtime. The SMC1500IC is the ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices. This UPS provides availability and manageability to your network, allowing you to focus on business growth instead of business downtime. It is trusted to protect critical data and equipment from power problems by supplying clean and reliable network-grade power.

APC award winning SMC1500IC is an affordable true sine-wave UPS in the Smart-UPS family. A 900w 1500va UPS designed for entry level servers and network equipment, it is compatible with today’s active power factor corrected (PFC) power supplies.





Introducing APC SmartConnect - the next generation of Smart-UPS

The next generation of Smart-UPS™ now boast an ingenious connectivity feature that makes Smart-UPS even more adaptable and even easier to deploy. APC™ SmartConnect is an enabling feature that allows customers to view the status of their UPS through a secure web portal. Through this innovative remote management interface, customers will receive automatic notifications, firmware updates, and advanced support. APC SmartConnect's easy-to-use network connectivity provides added value, and more importantly, added peace of mind.

Key Features of APC SMC1500IC First of its kind: The APC SmartConnect feature makes Connected Smart-UPS the first cloud enabled UPS for distributed IT.
Advice from the experts: Connected Smart-UPS routinely provides proactive UPS lifecycle recommendations, helping maximise the lifespan of your APC UPS.
Accessibility: The APC SmartConnect web portal is accessible from any internet connected device. You'll be able to check on your IT equipment on site or on the go.
Enabled as a standard: APC SmartConnect will be automatically included on select Smart-UPS models; making it the perfect solution for price-conscious professionals in need of power security.
Seamless integration: Easily integrate with leading remote monitoring and management solutions, so you can manage customer portfolios in a single platform.
Secure, remote monitoring

Connected Smart-UPS support remote monitoring through our secure web portal, so you can always be up to date on the status of your power infrastructure.

Pro-active lifecycle alerts

Maximise the life span of your UPS, and protect your investment, with pro-active alerts for firmware upgrade, device maintenance and warranty protection.

Cloud enabled as standard

New Smart-UPS models are cloud enabled as standard, with an inbuilt ethernet port. We've made it as easy and cost effective as possible to monitor your UPS online.

Trusted to protect critical data and equipment from power problems by supplying clean and reliable network-grade power. In addition to legendary reliability and manageability, Smart-UPS have extremely high efficiency at low, medium and high load levels making them ideal for today's multi-core or virtualised servers that have varying load consumption.

Included PowerChute Business Edition software is compatible with all major server operating systems and provides UPS management and safe system shutdown.



Main Features Cold-start capable - Provides temporary battery power when the utility power is out.
Green mode - Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
High online efficiency - Reduces utility costs, generates less heat.
LCD Status Display - Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
Pure sine wave output on battery - Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Temperature-compensated battery charging - Prolongs battery life by regulating the charge voltage according to battery temperature.
Product Features LCD (Liquid Crystal Display) - Intuitive interface provides comprehensive status information at a glance.
Communication Ports - USB and serial ports for UPS management.
8 Surge and UPS Protected Outlets
Safety-agency approved - Ensures the product has been tested and approved to national standards.
Battery disconnect - Convenient way to disconnect battery for transport.
Push Button Circuit Breaker - Provides for easy recovery from circuit overloads and protects your fuse box and electronics from electrical damage.
Pure Sine-Wave Output - Simulates the utility when on battery for optimum device compatibility.
Advanced battery management - Temperature compensated charging extends life of internal batteries.
High Efficiency Green Mode - Saves utility costs and reduces heat promoting longer component life.
Network Grade Power Conditioning - Automated voltage regulation, noise filtering and surge protection.
APC Smart-UPS C Display LCD Display Screen - Comprehensive status at a glance.
Status Conditions: Online, On battery, Green mode, Load graph, Battery charge graph, Audible alarm.
Measures: Input & Output voltage, Load viewable in Watts, VA or Percent, Output current and frequency, Event counter, Estimated on battery runtime.
On Line/On Battery - LED illuminates Green when UPS is on utility power, or Orange when providing battery power.
On/Off Button
System Fault LED - Illuminates in the event of a system fault and displays error message.
Mute Button - Used to silence the alarms.
Display Button - Steps through each measurement screen and allows choosing the default view.
Battery Options for this Product APC Replacement Battery Cartridge - RBC6

This APC Replacement Battery Cartridge fits selected APC Smart-UPS and Back-UPS, restoring power back-up capacity for home offices, small businesses, and IT departments.

This replacement battery cartridge (RBC) has a lifetime of three to five years, offers safe and reliable support to the UPS, and extends the useful life of your UPS. The APC RBC comes fully assembled and includes easy-to-follow replacement instructions, making hot-swap installation simple. Purchase Replacement Battery Cartridge *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

APC Warranties available for this Product APC Service Pack Warranty Extension
(New Product Purchases) FEWBEXTWAR1YR-SP-02

Purchase 1 Year Warranty FEWBEXTWAR3YR-SP-02

Purchase 3 Year Warranty APC Service Pack Warranty Extension
(Renewal or High Volume) FEWEXTWAR1YR-SP-02

Purchase 1 Year Warranty FEWEXTWAR3YR-SP-02

Purchase 3 Year Warranty Protection for your system, peace of mind for you - With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it. This Product is Compatible with these Mounting Products Rack Mounting Bracket for NetBotz Camera Pod 160 - NBAC0302

Eaton 5SC UPS provides line-interactive, affordable and reliable protection for small business servers. It includes a LCD interface for real time status and measurement. This unit also possesses the Advanced Battery Management (ABM) technology that increases battery lifetime. It is line interactive with Automatic Voltage Regulation (AVR). With its 8 IEC outputs and compact design the 5SC fits anywhere easily.
Key Features LCD interface clearly shows key information
Sinewave output for compatibility with today’s small business servers
Compact design for easy integration even with space constraints (kiosks, cash machines, ticket machines etc.) and up to eight outlets for better flexibility
Reliable, long-lasting UPS with patented ABM technology that increases battery service life by up to 50%
Eaton Intelligent Power software delivered as standard is compatible with all major operating systems

APC’s SMT1500IC is part of the award-winning Smart-UPS family, the most popular UPS in the world for servers, storage, and networks.

The APC award-winning Rackmountable SMT1500IC is an affordable true sine-wave UPS in the Smart-UPS family. A 1000W 1500VA UPS designed for entry-level servers and network equipment, it is compatible with today’s active power factor corrected (PFC) power supplies.



The next generation of Smart-UPS™ now boasts an ingenious connectivity feature that makes Smart-UPS even more adaptable and easier to deploy. APC™ SmartConnect allows customers to view the status of their UPS through a secure web portal. Through this innovative remote management interface, customers receive automatic notifications, firmware updates, and lifecycle recommendations. APC SmartConnect’s easy-to-use network connectivity adds value and peace of mind.

Key Features First of its kind: APC SmartConnect makes Connected Smart-UPS the first cloud-enabled UPS for distributed IT.
Expert guidance: Provides proactive UPS lifecycle recommendations to help maximize the lifespan of your UPS.
Accessibility: Access the SmartConnect web portal from any internet-connected device for real-time insights.
Standard inclusion: SmartConnect is automatically included on select Smart-UPS models, ideal for professionals needing reliable power security.
Seamless integration: Integrates with leading remote monitoring and management platforms for unified control.
Secure, Remote Monitoring Connected Smart-UPS supports remote monitoring through our secure web portal, keeping you updated on your power infrastructure’s status.

Proactive Lifecycle Alerts Maximize UPS lifespan with proactive alerts for firmware upgrades, maintenance, and protection notifications.

Cloud Enabled as Standard New Smart-UPS models come cloud enabled with built-in Ethernet ports, making online monitoring easy and cost-effective.

Trusted to protect critical data and equipment from power issues, supplying clean, reliable network-grade power. Smart-UPS systems offer high efficiency at varying load levels, making them ideal for today’s multi-core and virtualized servers.

Included PowerChute Business Edition software is compatible with all major server operating systems and provides UPS management and safe system shutdown.



Main Features Cold-start capable – Provides temporary battery power when utility power is out.
Green mode – Bypasses unused electrical components to maintain high efficiency without sacrificing protection.
High online efficiency – Reduces utility costs and heat generation.
LCD Status Display – Displays key UPS information, with load and battery bar graphs.
Pure sine wave output – Ensures compatibility with active PFC servers and sensitive electronics.
Temperature-compensated charging – Extends battery life by regulating charge voltage based on temperature.
Product Features Alphanumeric LCD
Provides detailed, accurate information with local configuration options.
Communication Ports
Serial, USB, and SmartSlot™ for accessory cards.
8 IEC320 C13 Outlets
Battery Disconnect
Simple battery disconnection for transport.
Push Button Circuit Breaker
Allows easy recovery from circuit overloads.
Network-Grade Power
Ensures stability through AVR, surge protection, and noise filtering.
High Efficiency Green Mode
Reduces energy costs and heat buildup for longer component life.
Advanced Battery Management
Temperature-compensated charging and intelligent replacement alerts.
APC Smart-UPS C Display Intuitive, easy-to-use LCD interface – Offers detailed information via basic or advanced menus.

Power Status Operating mode and efficiency
Load VA/Watts/Amps
Input/Output voltage and frequency
Battery capacity and runtime
Energy meter and more
Control: UPS and outlet group settings

Language: Multilingual support

Power Quality Settings

Alarms, Delays, and Thresholds

Test and Diagnostics: Run battery and runtime calibration tests

Logs: Review the last 10 transfers and faults

About: View part numbers, serials, install dates, and replacement recommendations

Status Indicators: Online, on battery, fault, and replace battery LEDs

Navigation: Quick access and adjustment via arrow keys, escape, and return options

APC Warranties available for this Product APC Service Pack Warranty Extension
(New Product Purchases) FEWBEXTWAR1YR-SP-03

Purchase 1 Year Warranty FEWBEXTWAR3YR-SP-03

Purchase 3 Year Warranty APC Service Pack Warranty Extension
(Renewal or High Volume) FEWEXTWAR1YR-SP-03

Purchase 1 Year Warranty FEWEXTWAR3YR-SP-03

Purchase 3 Year Warranty Protection for your system, peace of mind for you - With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it. Battery Options for this Product APC Replacement Battery Cartridge - RBC7

This APC Replacement Battery Cartridge fits selected APC Smart-UPS and Back-UPS, restoring power back-up capacity for home offices, small businesses, and IT departments.

This replacement battery cartridge (RBC) has a lifetime of three to five years, offers safe and reliable support to the UPS, and extends the useful life of your UPS. The APC RBC comes fully assembled and includes easy-to-follow replacement instructions, making hot-swap installation simple. Purchase Replacement Battery Cartridge *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

This Product is Compatible with these Sensors APC Temperature Sensor - AP9335T
APC Temperature & Humidity Sensor - AP9335TH

The ATEN Professional Online UPS offers you a different way to access detailed UPS settings and information with an LCD screen. The illuminated LCD screen displays input voltage, battery capacity, etc. and includes a three-button configuration interface and audible alarms for different modes of operation.

Package Contents
1x Online UPS
1x Rack Mounting Kit
1x Rail Slide Kit
1x RS-232 Cable
1x USB Type A to B Cable
3x Power Cable
1x Installation CD
2x Vertical Mount Kit
1x User Instructions
The UPS has one USB port and one Serial port that allow connection and communication between the UPS and the connected computer. Power management software installed on the connected computer(s) gives IT professionals the tools they need to easily monitor and manage their backup power. This advanced software allows users to access vital UPS battery conditions, load levels, and runtime information as well as provide unattended shut down of network computers and virtual machines connected to a battery backup during a power event.

If a UPS is present and a power loss occurs, the batteries in the UPS would keep the power steady and unchanged. The ATEN Professional Online UPS adjusts incoming AC power, provides battery backup to pass through most outages, and saves open files automatically. When power is restored, the UPS begins recharging its batteries.

Features

True double-conversion

Output power factor is 1 (maxium), which means all of the power supplied is being used for productive work and makes work the most efficient.

Output voltage regulation < 1%

Provides higher performance and efficiency for critical applications.

Programmable power management outlets

Users can easily and independently control load segments. During power failure, this feature enables users to extend battery time to mission-critical devices by shutting down noncritical devices.

Emergency Power Off function (EPO)

EPO connector at rear panel allows emergency UPS Power Off from a remote location.

SNMP + USB + RS-232 multiple communications

Allows either USB or RS-232 communication ports to work with SNMP interface simultaneously.

Hot swappable battery design

All potential UPS maintenance, including complete power module exchange, can be performed without powering down connected equipment. As long as utility power is on, you can leave the UPS and connected equipment on while replacing the battery.

ECO mode for energy saving

Offers up to 97% efficiency to cut energy usage and cost. UPS power application via static bypass, timely returning to online double conversion when the need arises.

Smart battery charger design to optimize battery performance

Adjusts charging voltage according to outside temperatures and extends the useful service life of batteries.

Multi-functional LCD interface

Displays immediate, detailed information on input voltage, battery capacity, power status, battery status, operating status, and assessed backup runtime, etc.

Safety and Protection

Provides over-voltage cut-off protection and surge immunity by MOV for full-time equipment protection.

High power factor charger

Up to 1000W capacity with very low ripple current when charging battery.

The Online UPS unit continuously filters wall power through the battery system. Since the attached electronics run completely off the battery (that are always topped off by the external power supply), there is never a single millisecond of power interruption when there is power loss or voltage regulation issues. The Online UPS unit thus acts as an electronic firewall between your devices and the outside world by stabilizing all the electricity to which your devices are exposed.

APC’s SMT1000RMI2UC is part of the award-winning Smart-UPS family — the most popular UPS series in the world for servers, storage, and networks.

APC’s rackmountable SMT1000RMI2UC is an affordable true sine-wave UPS designed for entry-level servers and network equipment. Delivering 700W/1000VA, it ensures compatibility with today’s active power factor corrected (PFC) power supplies, offering reliable performance and protection.

The next generation of Smart-UPS™ introduces an innovative connectivity feature making deployment and management simpler. APC™ SmartConnect enables customers to securely view the status of their UPS via a web portal, providing automatic notifications, firmware updates, and proactive management features. With SmartConnect, network connectivity is effortless, adding both convenience and confidence to IT environments.

Key Features of APC SmartConnect First of its kind: Connected Smart-UPS are the first cloud-enabled UPS for distributed IT environments.
Expert insight: Provides proactive lifecycle recommendations to help extend the UPS lifespan.
Accessible monitoring: Access your UPS data securely from any internet-connected device.
Standard inclusion: SmartConnect comes pre-enabled on select Smart-UPS models.
Seamless integration: Compatible with leading remote monitoring and management solutions.
Secure, remote monitoring
Monitor Smart-UPS remotely through a secure web portal and stay informed on system health.

Pro-active lifecycle alerts
Extend UPS life with early alerts for maintenance and firmware upgrades.

Cloud enabled as standard
New models feature built-in Ethernet connectivity for effortless monitoring.

Trusted to safeguard critical data and equipment by delivering clean, reliable network-grade power. Smart-UPS units offer exceptional efficiency across varying loads, making them ideal for multi-core and virtualised servers. Included PowerChute Business Edition software provides seamless system management and safe shutdown compatibility with all major operating systems.

Key Features of APC Smart-UPS SMT1000RMI2UC Cold-start capable: Provides temporary battery power during utility outages.
Green mode: Patent-pending design improves efficiency by bypassing unused components during stable power conditions.
High online efficiency: Lowers utility costs and reduces heat generation.
LCD status display: Clear visual interface with load and battery bar graphs.
Pure sine wave output: Ensures compatibility with active PFC servers and sensitive electronics.
Temperature-compensated charging: Extends battery life with voltage regulation based on temperature.
1. Alphanumeric LCD - Intuitive interface providing detailed operational data and local configuration.

2. Communication Ports - Includes Serial, USB, and SmartSlot™ for accessory cards.

3. 4 x IEC320 C13 Outlets

4. Push Button Circuit Breaker - Enables quick recovery from overloads.

Network Grade Power Conditioning - Automated voltage regulation, surge protection, and noise filtering.

Pure Sine-Wave Output - Provides optimal compatibility for sensitive devices.

Advanced Battery Management - Temperature-compensated charging extends battery life.

High Efficiency Green Mode - Reduces heat generation and operational costs.

Key Features of APC Smart-UPS C Display Intuitive, easy-to-use LCD interface: Offers detailed operational data via basic or advanced menus.

Power Status:

Operating mode and efficiency
Load VA/Watts/Amps
Input/Output voltage and frequency
Battery capacity and runtime
Energy meter and more
Control: Configure UPS and outlet settings.

Language, power quality, alarm, and threshold settings

Diagnostics: Run battery and runtime calibration tests.

Logs: Review recent transfers and faults.

About: Access system information and replacement dates.

Status Indicators: Online, on battery, fault, and replace battery LEDs.

Navigation & Control: Escape, Return, and arrow keys for quick setting adjustments.

APC UPS Network Management Card 2 APC UPS network management cards provide secure remote monitoring and control via web browser, command line, or SNMP. Built with advanced encryption and alerting, they deliver dependable, real-time UPS management capabilities.

Key Features of APC UPS Network Management Card 2 Command line interface: Remote access via Telnet and SSH.
SmartSlot compatibility: Works with all SmartSlot-enabled UPS models.
IPv6 support: Operates on modern network protocols.
Standard RFC 1628 MIB: SNMP trap forwarding for UPS event monitoring.
Encryption: Secure HTTPS/SSL, SSH, and SNMPv3 connections.
Multi-user access: Supports multiple simultaneous user sessions.
Firmware update support: Simple remote firmware management (SMX, SMT, SRT models).
Smart battery management: Provides detailed cartridge and fault analysis.
Modbus TCP support: Enables BMS or third-party integration.
APC Warranties available for this Product APC Service Pack Warranty Extension
(New Product Purchases) FEWBEXTWAR1YR-SP-03

Purchase 1 Year Warranty FEWBEXTWAR3YR-SP-03

Purchase 3 Year Warranty APC Service Pack Warranty Extension
(Renewal or High Volume) FEWEXTWAR1YR-SP-03

Purchase 1 Year Warranty FEWEXTWAR3YR-SP-03

Purchase 3 Year Warranty Protection for your system, peace of mind for you - With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it. Battery Options for this Product APC Replacement Battery Cartridge - RBC132

This APC Replacement Battery Cartridge fits selected APC Smart-UPS and Back-UPS, restoring power back-up capacity for home offices, small businesses, and IT departments.

This replacement battery cartridge (RBC) has a lifetime of three to five years, offers safe and reliable support to the UPS, and extends the useful life of your UPS. The APC RBC comes fully assembled and includes easy-to-follow replacement instructions, making hot-swap installation simple. Purchase Replacement Battery Cartridge *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

This Product is Compatible with these Mounting Products APC AP9625 2-Post Mounting Kit for Smart-UPS and Symmetra - AP9625
This Product is Compatible with these Sensors APC Temperature Sensor - AP9335T
APC Temperature & Humidity Sensor - AP9335TH

APC’s SMX1000I is part of the award-winning Smart-UPS family, the most popular UPS in the world for servers, storage, and networks. The 800W / 1000VA extended runtime UPS protects critical data and equipment from power disturbances while delivering clean, reliable network-grade power.

With exceptional reliability and efficient manageability, Smart-UPS units maintain extremely high efficiency at low, medium, and high load levels—making them ideal for multi-core or virtualized servers with variable power demands.

Key Features of APC Smart-UPS SMX1000I Alphanumeric LCD: Intuitive interface provides accurate system data and configuration control.
Communication Ports: Serial, USB, and SmartSlot™ for accessory cards.
8 IEC320 C13 Outlets: Organized into two switchable groups.
Push Button Circuit Breaker: Enables quick recovery from overloads.
Emergency Power Off (EPO): Allows remote UPS shutdown during emergencies.
Network-grade Power: Filters noise and provides AVR and surge protection.
High Efficiency Green Mode: Reduces utility costs and extends component lifespan.
Advanced Battery Management: Temperature-compensated charging and predictive replacement.
Additional Features Slim 2U Rack/Tower Convertible: Rotating display adapts to rack or tower setup.
High-Frequency Design: Reduces or eliminates bulky transformers for easier installation.
Smart External Battery Connector: Auto-detects and integrates external batteries.
Switched Outlet Groups: Manage startup sequencing and non-critical loads.
Smart-UPS Display Features The intuitive LCD interface provides a clear and consistent view of system performance with basic or advanced menus for customization.

Power Status Operating mode and efficiency
Load VA/Watts/Amps
Input/Output voltage and frequency
Battery capacity and runtime
Energy meter and diagnostics
Control and Configuration Adjust UPS and outlet group settings, power quality, alarms, delays, and thresholds. Run diagnostics and battery calibration tests for optimal performance.

Logging View the last 10 transfers and faults, part numbers, serials, and replacement dates directly on the display.

Navigation Online Status Indicators: Displays operating status and alerts.
Escape: Returns to the previous screen.
Return: Confirms settings.
Navigation Arrows: Quickly adjust and browse through settings.
Package Includes CD with software,
Documentation CD,
Installation guide,
Rack mounting brackets,
Removable support feet,
Smart UPS RS-232 cable,
USB cable.
APC Warranties available for this Product APC Service Pack Warranty Extension
(New Product Purchases) FEWBEXTWAR1YR-SP-02

Purchase 1 Year Warranty FEWBEXTWAR3YR-SP-02

Purchase 3 Year Warranty APC Service Pack Warranty Extension
(Renewal or High Volume) FEWEXTWAR1YR-SP-02

Purchase 1 Year Warranty FEWEXTWAR3YR-SP-02

Purchase 3 Year Warranty Protection for your system, peace of mind for you - With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it. Battery Options for this Product APC Replacement Battery Cartridge - APCRBC116

This APC Replacement Battery Cartridge fits selected APC Smart-UPS and Back-UPS, restoring power back-up capacity for home offices, small businesses, and IT departments.

This replacement battery cartridge (RBC) has a lifetime of three to five years, offers safe and reliable support to the UPS, and extends the useful life of your UPS. The APC RBC comes fully assembled and includes easy-to-follow replacement instructions, making hot-swap installation simple. Purchase Replacement Battery Cartridge *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

APC External Battery Pack - SMX48RMBP2U

The APC Extended Run Battery Pack is the ideal companion for the APC Back-UPS Pro UPS (uninterruptible power supply).

The battery pack increases the duration of time that you can protect your electronic devices from damage and disconnect due to unexpected blackouts, voltage fluctuations, and other power disruptions. Purchase External Battery Pack *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

This Product is Compatible with these Mounting Products Rack Mounting Bracket for NetBotz Camera Pod 160 - NBAC0302
This Product is Compatible with these Sensors APC Temperature Sensor - AP9335T
APC Temperature & Humidity Sensor - AP9335TH

The Eaton 5SC UPS provides line-interactive, affordable and reliable protection for small business server in any kind of installation constraints. Complementing our range of industry leading UPSs, the 5SC includes an LCD interface for real-time status and measurements, implements manageability solutions compatible with most of IT platforms and provides sinewave output for compatibility with most sensitive IT equipments.

Main Features
Compact format for installation in small cabinets (Rack models) or easy integration even with space constraints (Tower models) such as kiosks, cash machines, ticket machines etc…


Adaptable to many kind of installation conditions such as standard rack, 2 posts rack, wall mounting (Rack models)


LCD interface clearly shows key information


Sinewave output for compatibility with today’s small business servers


Reliable, long-lasting UPS with patented ABM technology that increases battery service life by up to 50%


Serial and USB ports are HID compliant for automatic integration into major OS (Windows/MacOS/Linux)


Advanced software capability to adapt to many IT environment, including virtualization platforms (Rack and R/T models)
Technical Specifications Power Rating 1500 VA Input Voltage Range
Nominal Voltage 184V-276V
230V Configuration Rack 2U Connection (1) IEC-320-C14 Frequency 50/60 Hz Topology Line-interactive Configuration Tower or rack Dimensions
(H x W x D, mm) 86.2 x 440 x 405 Weight 17.78

APC award winning SMC1500I-2U is an affordable true sine-wave UPS in the Smart-UPS family.

The next generation of Smart-UPS™ introduces a new connectivity feature, making Smart-UPS even more adaptable and easier to deploy. APC™ SmartConnect allows customers to view the status of their UPS through a secure web portal. Through this remote management interface, customers receive automatic notifications, firmware updates, and advanced support. SmartConnect provides seamless network connectivity for added value and greater peace of mind.

Key Features of APC SmartConnect First of its kind: SmartConnect makes Connected Smart-UPS the first cloud-enabled UPS for distributed IT.
Advice from the experts: Provides proactive lifecycle recommendations to maximize UPS lifespan.
Accessibility: Access the SmartConnect web portal from any internet-connected device for on-site or remote monitoring.
Enabled as a standard: Included on select Smart-UPS models for professionals needing affordable power security.
Seamless integration: Easily integrates with leading remote monitoring and management platforms.
Secure, Remote Monitoring Connected Smart-UPS support remote monitoring through a secure web portal, ensuring you stay up to date on your power infrastructure’s status.

Pro-active Lifecycle Alerts Maximise UPS lifespan and protect your investment with proactive alerts for firmware updates, device maintenance, and protection notifications.

Cloud Enabled as Standard New Smart-UPS models are cloud-enabled as standard with an integrated ethernet port for easy, cost-effective online monitoring.

A 900W / 1500VA UPS designed for entry-level servers and network equipment, compatible with today’s active PFC power supplies. Trusted to protect critical data and equipment by delivering clean, reliable, network-grade power. Smart-UPS are known for their efficiency across load levels, making them ideal for virtualized or multi-core servers with variable power needs. Included PowerChute Business Edition software supports major server operating systems, providing UPS management and secure shutdown.

Key Features of APC Smart-UPS C LCD (Liquid Crystal Display): Intuitive interface providing real-time status at a glance.
Communication Ports: USB and serial ports for UPS management.
4 Surge and UPS Protected Outlets
Safety-agency approved: Tested and approved to national safety standards.
Network Grade Power Conditioning: Automated voltage regulation, noise filtering, and surge protection.
Push Button Circuit Breaker: Quick recovery from overloads.
Pure Sine-Wave Output: Simulates utility power for optimal device compatibility.
Advanced Battery Management: Temperature-compensated charging extends battery life.
High Efficiency Green Mode: Reduces heat and utility costs while improving longevity.
APC Smart-UPS C Display Features 1. LCD Display Screen - Provides comprehensive status visibility.

Status Conditions:
- Online
- On battery
- Green mode
- Load graph
- Battery charge graph
- Audible alarm

Measures:
- Input & Output Voltage
- Load in Watts, VA or %
- Output current and frequency
- Event counter
- Estimated on-battery runtime

2. On Line/On Battery: LED illuminates green when on utility power and orange when on battery.

3. On/Off Button

4. System Fault LED: Illuminates during a system fault and displays an error message.

5. Mute Button: Silences alarms.

6. Display Button: Steps through screens and allows choosing the default view.

APC Warranties available for this Product APC Service Pack Warranty Extension
(New Product Purchases) FEWBEXTWAR1YR-SP-03

Purchase 1 Year Warranty FEWBEXTWAR3YR-SP-03

Purchase 3 Year Warranty APC Service Pack Warranty Extension
(Renewal or High Volume) FEWEXTWAR1YR-SP-03

Purchase 1 Year Warranty FEWEXTWAR3YR-SP-03

Purchase 3 Year Warranty Protection for your system, peace of mind for you - With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it. Battery Options for this Product APC Replacement Battery Cartridge - RBC132

This APC Replacement Battery Cartridge fits selected APC Smart-UPS and Back-UPS, restoring power back-up capacity for home offices, small businesses, and IT departments.

This replacement battery cartridge (RBC) has a lifetime of three to five years, offers safe and reliable support to the UPS, and extends the useful life of your UPS. The APC RBC comes fully assembled and includes easy-to-follow replacement instructions, making hot-swap installation simple. Purchase Replacement Battery Cartridge *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

This Product is Compatible with these Mounting Products APC AP9625 2-Post Mounting Kit for Smart-UPS and Symmetra - AP9625
Rack Mounting Bracket for NetBotz Camera Pod 160 - NBAC0302

The APC SMT750RMI2UNC Smart-UPS is ideal for powering blade or density optimised servers in a distributed power protection environment as the primary or redundant protection solution. The extended run Smart-UPS model has the capability to add external battery packs to scale runtime from minutes to hours typically needed for converged voice and data network power protection.

The 2U rackmount 500W 750VA UPS is trusted to protect critical data and equipment from power problems, and supplies clean and reliable network-grade power. In addition to legendary reliability and manageability, Smart-UPS units have extremely high efficiency at low, medium and high load levels, making them ideal for today’s multi-core or virtualized servers that have varying load consumption.

Key Features of APC SMT750RMI2UNC Alphanumeric LCD (Liquid Crystal Display) - Intuitive interface provides detailed and accurate information with the ability to configure locally.
Communication Ports - Serial, USB, and SmartSlot™ for accessory cards.
4 IEC320 C13 Outlets
Push Button Circuit Breaker - Enables quick recovery from overloads.
Network-grade Power - Provides stable power conditions by filtering noise, automatic voltage regulation (AVR), and surge protection.
High Efficiency Green Mode - Saves utility costs and reduces heat, promoting longer component life.
Advanced Battery Management - Temperature-compensated charging extends battery life and recommends replacement dates.


Smart-UPS Display Features Smart-UPS Display
Intuitive, easy-to-use LCD interface

LCD Display Screen - Clear, consistent, and detailed information in your choice of basic or advanced menus.

Power Status:

Operating mode and efficiency
Load VA/Watts/Amps
Input/Output voltage and frequency
Battery capacity and runtime
Energy meter and more
Control - UPS and outlet group settings

Language
Power quality settings

Alarm, delay and threshold settings
Test and Diagnostics - Initiate battery and runtime calibration tests

Logs - See explanation of last 10 transfers and faults

About - UPS and replacement battery part numbers, serial numbers, battery install, and suggested replacement dates

Online Status Indicators - Online, on battery, fault, and replace battery LEDs for quick status identification.

Escape - Exits to the previous menu or screen.
Return - Used to enter or confirm settings.
Navigation Arrows - Allow for quick adjustment of settings.

APC UPS Network Management Card 2 APC UPS network management cards allow for secure monitoring and control of an individual APC UPS via web browser, command line interface or SNMP. Embedded technology provides exceptional reliability with notification features that inform you of problems as they occur.

Key Features of APC UPS Network Management Card 2 Command line interface - Offers simultaneous remote management access through Telnet and SSH.
Compatible with SmartSlot enabled UPS - Compatible with all SmartSlot UPS.
IPv6 Support - Capable of operating on a network using IPv6 protocol.
Standard UPS RFC 1628 MIB Compatible - Make UPS information available to your preferred network, server or enterprise management system.
Device Encryption - Securely connect via HTTPS/SSL, SSH (up to 2048-bit encryption), SNMPv3.
Multiple language support - Web browser interface available in English, German, Russian, Simplified Chinese & Japanese.
Multiple user access - Supports simultaneous web browser access for up to 8 users and network command line interface access for up to 3 users.
UPS Firmware Update - User friendly mechanism to remotely and seamlessly update UPS firmware via the web browser interface (SMX, SMT and SRT Smart-UPS only).
Smart Battery Management Support - Detailed battery information including battery cartridge parameters provides early-warning fault analysis (SRT Smart-UPS only).
Modbus TCP Support - Supports reporting UPS information to Building Management Systems or other third party management systems via Modbus TCP.
APC Warranties available for this Product APC Service Pack Warranty Extension
(New Product Purchases) FEWBEXTWAR1YR-SP-04

Purchase 1 Year Warranty FEWBEXTWAR3YR-SP-04

Purchase 3 Year Warranty APC Service Pack Warranty Extension
(Renewal or High Volume) FEWEXTWAR1YR-SP-04

Purchase 1 Year Warranty FEWEXTWAR3YR-SP-04

Purchase 3 Year Warranty Protection for your system, peace of mind for you - With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it. Battery Options for this Product APC Replacement Battery Cartridge - RBC123

This APC Replacement Battery Cartridge fits selected APC Smart-UPS and Back-UPS, restoring power back-up capacity for home offices, small businesses, and IT departments.

This replacement battery cartridge (RBC) has a lifetime of three to five years, offers safe and reliable support to the UPS, and extends the useful life of your UPS. The APC RBC comes fully assembled and includes easy-to-follow replacement instructions, making hot-swap installation simple. Purchase Replacement Battery Cartridge *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

This Product is Compatible with these Sensors APC Temperature Sensor - AP9335T
APC Temperature & Humidity Sensor - AP9335TH

Advanced protection for IT, Networking, Storage, Telecom, Infrastucture, Industrial and Medical industries

Online double conversion UPS Successor of Eaton 9130 UPS

Performance and Availability

Double-conversion topology. The Eaton 9SX constantly monitors power conditions and regulates voltage and frequency.

The internal bypass allows service continuity in case of internal fault, a maintenance bypass is also available (as option) for easy replacement of the UPS without powering down critical systems.

With a 0.9 power factor the 9SX delivers 28% more power than UPS in its class. It powers more servers than other UPSs with equivalent VA ratings and lower power factors.

Stronger, longer battery life: Eaton ABM® battery management technology uses an innovative three-stage charging technique that extends battery life by up to 50%. 9SX also provides recommended replacement date for batteries.

Manageability

The new graphical LCD provides clear information on the UPS’s status and measurements on a single screen. Enhanced configuration capabilities are also available.

The 9SX can meter energy consumption. kWh values can be monitored using the LCD or Eaton’s Intelligent Power® Software.

Load segment control enables prioritised shutdowns of nonessential equipment to maximise battery runtime for critical devices.

9SX offers Serial, USB connectivity, plus an extra slot for an optional communication card. Eaton’s Intelligent Power® Software seamlessly integrates with leading virtualisation environments and cloud orchestrations tools.

Flexibility

One platform, two factors, dozens of choices. Up to 3000 VA of UPS power is packed into only 2U of rack space. The tower option is about the size of a modern, compact PC.

More runtime can be added with up to 4 external hot-swappable battery modules, able to run systems for hours if necessary. The additional battery modules are automatically recognized by the UPS.

Eaton 9SX 1000 UPS Specifications

1 - Remote Power Off connector
(configurable)

2 - Slot for Management card

  3 - External battery module (EBM) connector
with automatic detection (RJ11)

4 - Relay output

  5 - USB and serial ports


6 - Input/Ouput connections

  Please see the Eaton 9SX Technical Specification for detailed battery and physical information

Advanced protection for Servers, Switches, Routers and Storage Devices

Exceptional efficiency, manageability and energy metering capabilities for IT managers

The new Eaton 5PX Gen2 UPS provides Enterprise Networks and Edge IT equipment with best-in-class line-interactive power protection maximising IT space and Service Continuity. Eaton 5PX Gen 2 offers powerful tools to remotely monitor, integrate with IT architecture and remotely deploy / maintain large installed base of UPSs.

Performance and Efficiency

Eaton 5PX Gen 2 provides Unity power factor (W=VA) capability. With 11% more power than other UPS it can protect more servers

Energy Star 2.0 certified, 5PX Gen2 offers best-in-class efficiency performance to reduce energy consumption and cooling costs.

When operating in battery mode the 5PX provides a high-quality output signal for any sensitive equipment connected, such as active PFC (power factor corrected) servers.

Each 5PX Gen2 battery configuration provides the best size/runtime ratio.

Management and Cybersecurity

Innovative graphical LCD display brings all operating information at first sight. It also enhances commissioning and configuration capabilities.

5PX Gen2 Netpack models are delivered with Eaton Gigabit network management card, which provides Dual cybersecurity certifications (UL 2900-1 & IEC 62443-4-2) and enables connection to Eaton Cyber Secured Monitoring solutions

Together with 5PX Gen2, Eaton Gigabit network management card allows both remote UPS settings and remote firmware upgrade to ensure easy deployment (fleet management) and reduced maintenance cost.

5PX Gen2 meters energy consumption right down to the managed outlet groups. kWh values can be monitored using the LCD or Eaton’s Intelligent Power Software.

Eaton’s Intelligent Power Software seamlessly integrates with leading virtualization environments and cloud orchestration tools.

Availability and Flexibility

5PX Gen2 2200VA & 3000VA are available in RT2U format (optimized for rack mounting) or RT3U (for tower installation or short-depth racks). Pedestals and rail kits are included with all models.

5PX Gen2 load segment control enables prioritized shutdowns of non-essential equipment to maximize battery runtime for critical devices (2 groups).

Eaton ABM® battery management technology uses a threestage charging technique that optimizes battery health and extends lifetime by up to 50%.

Up to 4 external hot-swappable battery modules can be added for longer power availability.

Please see the Eaton 5PX Gen2 Technical Specification for detailed battery and physical information

APC’s SMT1500RMI2U is part of the award-winning Smart-UPS family, the most popular UPS solution worldwide for servers, storage, and networks.

The Rackmountable, Line-Interactive SMT1500RMI2U is an affordable true sine-wave UPS designed for entry-level servers and network equipment. With 900W / 1500VA capacity, it is fully compatible with modern active power factor corrected (PFC) power supplies.



Introducing APC SmartConnect – the next generation of Smart-UPS

SmartConnect provides secure, web-based monitoring for your UPS, delivering automatic notifications, firmware updates, and lifecycle recommendations. With easy network connectivity, it ensures peace of mind and simplified management of your IT power infrastructure.

Key Features

Cloud-enabled: Connected Smart-UPS is the first cloud-ready UPS for distributed IT environments.
Expert guidance: Receive proactive UPS lifecycle recommendations to extend device lifespan.
Accessible anywhere: Check your UPS status from any internet-connected device.
Included as standard: SmartConnect is built into select models, offering a cost-effective solution for power security.
Seamless integration: Compatible with leading remote monitoring and management platforms.
Secure remote monitoring

Stay up-to-date on your UPS status through our secure web portal.

Pro-active lifecycle alerts

Maximise UPS lifespan with proactive firmware and maintenance alerts.

Cloud-enabled as standard

New Smart-UPS models include cloud connectivity via built-in Ethernet for easy, cost-effective monitoring.

Trusted to protect critical data and equipment, Smart-UPS delivers clean, reliable network-grade power with high efficiency across varying load levels—ideal for modern servers and virtualized environments.

Included PowerChute Business Edition software supports all major server OS and enables safe system shutdown and UPS management.



Main Features

Cold-start capable: Provides temporary battery power during utility outages.
Green mode: Bypasses unused components for high efficiency without sacrificing protection.
High online efficiency: Reduces utility costs and heat generation.
LCD Status Display: Key UPS status at a glance, with load and battery bar graphs.
Pure sine wave output: Ensures compatibility with active PFC servers and sensitive electronics.
Temperature-compensated battery charging: Extends battery life by adjusting charge voltage to temperature.



Additional Features

Alphanumeric LCD: Intuitive interface with detailed local configuration.
Communication Ports: Serial, USB, and SmartSlot™ accessory cards.
4 x IEC320 C13 Outlets
Push Button Circuit Breaker: Quick recovery from overloads.
Network-grade power conditioning: Voltage regulation, noise filtering, and surge protection.
Advanced battery management: Temperature-compensated charging extends battery life.
High Efficiency Green Mode: Reduces utility costs and heat, prolonging component life.
APC Smart-UPS C Display

Intuitive LCD interface - Clear and consistent information with basic or advanced menus.

Power Status

Operating mode and efficiency
Load VA/Watts/Amps
Input/output voltage and frequency
Battery capacity and runtime
Energy meter
Controls: UPS and outlet group settings

Power quality & alarms: Configure thresholds, delays, and diagnostics

Logs & Info: Access transfer history, fault logs, and battery replacement info

Navigation: Escape, Return, and arrow keys for easy adjustments



APC UPS Network Management Card 2

Provides secure monitoring and control of your UPS via web browser, command line, or SNMP. Embedded technology ensures reliability and instant notifications for any issues.

Main Features

Command line interface: Simultaneous remote access via Telnet and SSH.
SmartSlot compatibility: Works with all SmartSlot-enabled UPS.
IPv6 support: Operates on IPv6 networks.
Standard UPS RFC 1628 MIB: For SNMP event reporting to network or enterprise management systems.
Device encryption: Secure HTTPS/SSL, SSH, and SNMPv3 connections.
Multiple user access: Up to 8 web users and 3 command line users simultaneously.
UPS firmware update: Seamlessly update UPS firmware via web interface (SMX, SMT, SRT Smart-UPS).
Smart Battery Management support: Early-warning battery analysis (SRT Smart-UPS only).
Modbus TCP support: Reporting to building management or third-party systems.
APC Warranties available for this PDU APC Service Pack Warranty Extension
(New Product Purchases) WBEXTWAR1YR-SP-03

Purchase 1 Year Warranty WBEXTWAR3YR-SP-03

Purchase 3 Year Warranty APC Service Pack Warranty Extension
(Renewal or High Volume) WEXTWAR1YR-SP-03

Purchase 1 Year Warranty WEXTWAR3YR-SP-03

Purchase 3 Year Warranty Protection for your system, peace of mind for you - With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it. Battery Options for this Product APC Replacement Battery Cartridge - APCRBC159

This APC Replacement Battery Cartridge fits selected APC Smart-UPS and Back-UPS, restoring power back-up capacity for home offices, small businesses, and IT departments.

This replacement battery cartridge (RBC) has a lifetime of three to five years, offers safe and reliable support to the UPS, and extends the useful life of your UPS. The APC RBC comes fully assembled and includes easy-to-follow replacement instructions, making hot-swap installation simple. Purchase Replacement Battery Cartridge *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

APC Smart-UPS with Lithium-ion technology delivers intelligent, efficient network power protection for servers, point-of-sale systems, routers, switches, and other network devices — reducing maintenance needs and lowering total cost of ownership while enabling remote management across distributed environments.

Key Features of APC Smart-UPS High-efficiency Green Mode — achieves up to 96% efficiency to reduce energy and cooling costs.
Intelligent Battery Management — cell-level monitoring optimizes lithium-ion performance.
Network-grade Power — filtering, AVR, and surge protection ensure clean, stable output.
Operate Without Battery — instantly restores protection after complete discharge.
LCD Display — intuitive interface for status and configuration.
Built-in Energy Meter — tracks kWh usage and operating efficiency.
Cold-start Capable — provides battery power when utility power is absent.
Pure Sine Wave Output — ensures compatibility with sensitive and PFC devices.
Short-depth Rack Compatibility — compact design for tight rack installations.
SmartConnect — remote monitoring with notifications and updates.
Output Power Capacity 600 Watts / 750 VA for reliable backup of critical loads.

Energy Meter Provides real-time kilowatt-hour tracking for efficient energy use.

Rack Height 2U rack-mount form factor for space-efficient installation.

Lithium-ion Battery Compact, long-lasting, and environmentally friendly power storage.

Output Connections (2) IEC jumpers and (6) IEC 60320 C13 outlets for flexible deployment.

Pure Sine Wave Output Delivers consistent, utility-grade power for sensitive electronics.

Nominal Output Voltage 230 V nominal output to meet global power requirements.

Short-depth Rack Compatibility Ideal for installations with limited rack space.

Nominal Input Voltage 230 V standard input for regional compatibility.

SmartConnect Cloud-enabled monitoring with automatic updates and alerts.

Cold-start Capable Provides temporary battery power when utility power is lost.

Hot-swappable Batteries Ensures uninterrupted power during battery replacement.

Green Mode Bypasses unused components to achieve high efficiency without compromising protection.

Power Conditioning Protects against surges, spikes, and lightning disturbances.

High Online Efficiency Minimizes energy loss and heat for sustainable operation.

Intelligent Battery Management Precision charging ensures optimal battery performance and reliability.

This Product is Compatible with these Mounting Products APC AP9625 2-Post Mounting Kit for Smart-UPS and Symmetra - AP9625
APC Smart-UPS SMTL Tower Mounting Stabilizing Feet for Smart-UPS SMTL 750VA/1000VA - SMTL2USF

Smart UPS On Line provides high density, double conversion online power protection for servers, voice/data networks, medical labs, and light industrial applications. It supports loads from 1 kVA to 10 kVA in a rack/tower convertible chassis. The 6 kVA, 8 kVA, and 10 kVA models feature unity output power factor, ideal for power-intensive blade servers or heavily loaded equipment racks. When business-critical systems require extended runtime, Smart UPS On Line can be configured with multiple battery packs to meet those demands.

The included PowerChute Network Shutdown management software ensures unattended, graceful shutdown of network operating systems. Models 5 kVA to 10 kVA include an integrated network management card for remote monitoring. The Smart UPS On Line family offers exceptional performance for demanding environments, featuring a wide input voltage window, precise output voltage and frequency regulation, internal bypass, and input power factor correction.

Standard Features Best in class power density: More real power in watts, ranging from 0.82 to 0.9 pf on 1–3 kVA models, 0.85 pf on 5 kVA, and unity on 6–10 kVA units.
High efficiency “Green Mode”: Achieves 98% efficiency, reducing utility and cooling costs without compromising performance.
Graphical LCD display with multicolor backlight: Intuitive interface offering detailed information and local configuration.
Intelligent battery management: Temperature-compensated charging extends battery life, with algorithms recommending replacement dates and detecting added battery packs automatically.
Built-in energy meter: Measures and displays UPS efficiency across operating modes for easy tracking.
Operate without battery: Protects equipment instantly upon power return after full battery discharge.
Three-year warranty on electronics: Ensures long-term reliability and confidence.
LCD graphics display: Shows modes of operation, system parameters, and alarms through text and mimic diagrams.
ECO Mode: Bypasses unused electrical components during stable conditions for higher efficiency without loss of protection.
Battery failure notification: Provides early warnings for preventive maintenance.
Rack/Tower convertible: Maintains investment value when migrating between tower and rack-mount setups.
Additional Features Embedded network management card with environmental monitoring (5–10 kVA models): Enables remote monitoring and control via Ethernet, freeing the SmartSlot for additional accessories.
Switched outlet groups: Allows independent control of load receptacles, enabling device reboots, sequenced operations, noncritical load shedding, and scheduled shutdowns to conserve energy.
Emergency power off (EPO): Remote UPS shutdown option using normally open (NO) or normally closed (NC) contacts.
Communication ports: Includes Serial, USB, Ethernet, and SmartSlot interfaces for network accessories.
Communication protocols: Supports Modbus Serial, USB PowerSummary, HTTP, SNMP, and Telnet.
1:1, 3:1 input hard-wire options: Supports 3-PH or 1-PH input for 230 V, 8 kVA, and 10 kVA models.
Dual input: Allows second input source connection to UPS bypass for redundancy (230 V, 8–10 kVA models).
APC UPS Network Management Card 2 APC UPS Network Management Card 2 enables secure monitoring and control of APC UPS systems via web browser, CLI, or SNMP. Embedded technology ensures reliability, with real-time notifications of critical events.

Command line interface: Provides remote access through Telnet and SSH.
SmartSlot compatibility: Works with all SmartSlot-enabled UPS models.
IPv6 support: Fully operational in IPv6 environments.
Standard UPS RFC 1628 MIB compatible: Forwards SNMP traps to enterprise systems using RFC 1628 MIB.
Device encryption: Supports HTTPS/SSL, SSH (up to 2048-bit), and SNMPv3 for secure communication.
Multilingual interface: Available in English, German, Russian, Simplified Chinese, and Japanese.
Multi-user access: Supports up to 8 simultaneous web users and 3 CLI users.
Firmware update: Allows seamless remote firmware updates for SMX, SMT, and SRT Smart-UPS models.
Smart Battery Management: Delivers detailed battery data for proactive maintenance (SRT models only).
Modbus TCP support: Enables reporting to building and third-party management systems.
APC Warranties available for this Product APC Service Pack Warranty Extension
(New Product Purchases) FEWBEXTWAR1YR-SP-01

Purchase 1 Year Warranty FEWBEXTWAR3YR-SP-01

Purchase 3 Year Warranty APC Service Pack Warranty Extension
(Renewal or High Volume) FEWEXTWAR1YR-SP-01

Purchase 1 Year Warranty FEWEXTWAR3YR-SP-01

Purchase 3 Year Warranty Protection for your system, peace of mind for you - With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it. Battery Options for this Product APC External Battery Pack - SRT48BP

The APC Extended Run Battery Pack is the ideal companion for the APC Back-UPS Pro UPS (uninterruptible power supply).

The battery pack increases the duration of time that you can protect your electronic devices from damage and disconnect due to unexpected blackouts, voltage fluctuations, and other power disruptions. Purchase External Battery Pack *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

This Product is Compatible with these Mounting Products APC 2-Post Mounting Rail Kit for Smart-UPS SRT - SRTRK3
APC Smart-UPS SRT 19 inch Rail Kit for SRT 1/1.5/2.2/3kVA - SRTRK4
This Product is Compatible with these Sensors APC Temperature Sensor - AP9335T
APC Temperature & Humidity Sensor - AP9335TH

Advanced protection for IT, Networking, Storage, Telecom, Infrastucture, Industrial and Medical industries

Online double conversion UPS Successor of Eaton 9130 UPS

Performance and Availability

Double-conversion topology. The Eaton 9SX constantly monitors power conditions and regulates voltage and frequency.

The internal bypass allows service continuity in case of internal fault, a maintenance bypass is also available (as option) for easy replacement of the UPS without powering down critical systems.

With a 0.9 power factor the 9SX delivers 28% more power than UPS in its class. It powers more servers than other UPSs with equivalent VA ratings and lower power factors.

Stronger, longer battery life: Eaton ABM® battery management technology uses an innovative three-stage charging technique that extends battery life by up to 50%. 9SX also provides recommended replacement date for batteries.

Manageability

The new graphical LCD provides clear information on the UPS’s status and measurements on a single screen. Enhanced configuration capabilities are also available.

The 9SX can meter energy consumption. kWh values can be monitored using the LCD or Eaton’s Intelligent Power® Software.

Load segment control enables prioritised shutdowns of nonessential equipment to maximise battery runtime for critical devices.

9SX offers Serial, USB connectivity, plus an extra slot for an optional communication card. Eaton’s Intelligent Power® Software seamlessly integrates with leading virtualisation environments and cloud orchestrations tools.

Flexibility

One platform, two factors, dozens of choices. Up to 3000 VA of UPS power is packed into only 2U of rack space. The tower option is about the size of a modern, compact PC.

More runtime can be added with up to 4 external hot-swappable battery modules, able to run systems for hours if necessary. The additional battery modules are automatically recognized by the UPS.

Eaton 9SX 1000 UPS Specifications

1 - Remote Power Off connector
(configurable)

2 - Slot for Management card

  3 - External battery module (EBM) connector
with automatic detection (RJ11)

4 - Relay output

  5 - USB and serial ports


6 - Input/Ouput connections

  Please see the Eaton 9SX Technical Specification for detailed battery and physical information

The APC SMT1500RMI1U Smart-UPS is a 1500VA, line-interactive, rack-mountable uninterruptible power supply (UPS) designed for IT professionals or network administrators to maintain business uptime and continuity.

The APC SMT1500RMI1U Smart-UPS 1U rackmount 1000W 1500VA UPS is trusted to protect critical data and equipment from power problems, and supplies clean and reliable network-grade power. In addition to legendary reliability and manageability, Smart-UPS units have extremely high efficiency at low, medium and high load levels, making them ideal for today’s multi-core or virtualized servers that have varying load consumption.

Key Features of APC SMT1500RMI1U Alphanumeric LCD (Liquid Crystal Display) - Intuitive interface provides detailed and accurate information with the ability to configure locally.
Communication Ports - Serial, USB, and SmartSlot™ for accessory cards.
4 IEC320 C13 Outlets
Push Button Circuit Breaker - enables quick recovery from overloads.
Network-Grade Power - Provides most stable power conditions by filtering noise, automatic voltage regulation (AVR), and surge protection.
High Efficiency Green Mode - Saves utility costs and reduces heat promoting longer component life.
Advanced Battery Management - Temperature-compensated charging extends life and advanced algorithms recommend replacement date.
Features of Smart-UPS Display Intuitive, easy-to-use LCD interface

LCD Display Screen - Clear, consistent, and detailed information in your choice of basic or advanced menus.

Power Status: Operating mode and efficiency
Load VA/Watts/Amps
Input/Output voltage and frequency
Battery capacity and runtime
Energy meter and more
Control - UPS and outlet group settings

Language - Power quality settings

Alarm, delay and threshold settings

Test and Diagnostics - Initiate battery and runtime calibration tests

Logs - See explanation of last 10 transfers and faults

About - UPS and replacement battery part numbers, serial numbers, battery install, and suggested replacement dates

Online Status Indicators - Online, on battery, fault, and replace battery LEDs for quick status identification

Escape - Exits to the previous menu or screen

Return - Used to enter or confirm settings

Navigation Arrows - Allow for quick adjustment of settings APC Warranties available for this Product APC Service Pack Warranty Extension
(New Product Purchases) FEWBEXTWAR1YR-SP-03

Purchase 1 Year Warranty FEWBEXTWAR3YR-SP-03

Purchase 3 Year Warranty APC Service Pack Warranty Extension
(Renewal or High Volume) FEWEXTWAR1YR-SP-03

Purchase 1 Year Warranty FEWEXTWAR3YR-SP-03

Purchase 3 Year Warranty Protection for your system, peace of mind for you - With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it. Battery Options for this Product APC Replacement Battery Cartridge - FEAPCRBC88

This APC Replacement Battery Cartridge fits selected APC Smart-UPS and Back-UPS, restoring power back-up capacity for home offices, small businesses, and IT departments.

This replacement battery cartridge (RBC) has a lifetime of three to five years, offers safe and reliable support to the UPS, and extends the useful life of your UPS. The APC RBC comes fully assembled and includes easy-to-follow replacement instructions, making hot-swap installation simple. Purchase Replacement Battery Cartridge *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

This Product is Compatible with these Mounting Products Rack Mounting Bracket for NetBotz Camera Pod 160 - NBAC0302
This Product is Compatible with these Sensors APC Temperature Sensor - AP9335T
APC Temperature & Humidity Sensor - AP9335TH

Advanced protection for Servers, Switches, Routers and Storage Devices

Exceptional efficiency, manageability and energy metering capabilities for IT managers

The new Eaton 5PX Gen2 UPS provides Enterprise Networks and Edge IT equipment with best-in-class line-interactive power protection maximising IT space and Service Continuity. Eaton 5PX Gen 2 offers powerful tools to remotely monitor, integrate with IT architecture and remotely deploy / maintain large installed base of UPSs.

Performance and Efficiency

Eaton 5PX Gen 2 provides Unity power factor (W=VA) capability. With 11% more power than other UPS it can protect more servers

Energy Star 2.0 certified, 5PX Gen2 offers best-in-class efficiency performance to reduce energy consumption and cooling costs.

When operating in battery mode the 5PX provides a high-quality output signal for any sensitive equipment connected, such as active PFC (power factor corrected) servers.

Each 5PX Gen2 battery configuration provides the best size/runtime ratio.

Management and Cybersecurity

Innovative graphical LCD display brings all operating information at first sight. It also enhances commissioning and configuration capabilities.

5PX Gen2 Netpack models are delivered with Eaton Gigabit network management card, which provides Dual cybersecurity certifications (UL 2900-1 & IEC 62443-4-2) and enables connection to Eaton Cyber Secured Monitoring solutions

Together with 5PX Gen2, Eaton Gigabit network management card allows both remote UPS settings and remote firmware upgrade to ensure easy deployment (fleet management) and reduced maintenance cost.

5PX Gen2 meters energy consumption right down to the managed outlet groups. kWh values can be monitored using the LCD or Eaton’s Intelligent Power Software.

Eaton’s Intelligent Power Software seamlessly integrates with leading virtualization environments and cloud orchestration tools.

Availability and Flexibility

5PX Gen2 2200VA & 3000VA are available in RT2U format (optimized for rack mounting) or RT3U (for tower installation or short-depth racks). Pedestals and rail kits are included with all models.

5PX Gen2 load segment control enables prioritized shutdowns of non-essential equipment to maximize battery runtime for critical devices (2 groups).

Eaton ABM® battery management technology uses a threestage charging technique that optimizes battery health and extends lifetime by up to 50%.

Up to 4 external hot-swappable battery modules can be added for longer power availability.

Please see the Eaton 5PX Gen2 Technical Specification for detailed battery and physical information

Advanced protection for Servers, Switches, Routers and Storage Devices

Exceptional efficiency, manageability and energy metering capabilities for IT managers

The new Eaton 5PX Gen2 UPS provides Enterprise Networks and Edge IT equipment with best-in-class line-interactive power protection maximising IT space and Service Continuity. Eaton 5PX Gen 2 offers powerful tools to remotely monitor, integrate with IT architecture and remotely deploy / maintain large installed base of UPSs.

Performance and Efficiency

Eaton 5PX Gen 2 provides Unity power factor (W=VA) capability. With 11% more power than other UPS it can protect more servers

Energy Star 2.0 certified, 5PX Gen2 offers best-in-class efficiency performance to reduce energy consumption and cooling costs.

When operating in battery mode the 5PX provides a high-quality output signal for any sensitive equipment connected, such as active PFC (power factor corrected) servers.

Each 5PX Gen2 battery configuration provides the best size/runtime ratio.

Management and Cybersecurity

Innovative graphical LCD display brings all operating information at first sight. It also enhances commissioning and configuration capabilities.

5PX Gen2 Netpack models are delivered with Eaton Gigabit network management card, which provides Dual cybersecurity certifications (UL 2900-1 & IEC 62443-4-2) and enables connection to Eaton Cyber Secured Monitoring solutions

Together with 5PX Gen2, Eaton Gigabit network management card allows both remote UPS settings and remote firmware upgrade to ensure easy deployment (fleet management) and reduced maintenance cost.

5PX Gen2 meters energy consumption right down to the managed outlet groups. kWh values can be monitored using the LCD or Eaton’s Intelligent Power Software.

Eaton’s Intelligent Power Software seamlessly integrates with leading virtualization environments and cloud orchestration tools.

Availability and Flexibility

5PX Gen2 2200VA & 3000VA are available in RT2U format (optimized for rack mounting) or RT3U (for tower installation or short-depth racks). Pedestals and rail kits are included with all models.

5PX Gen2 load segment control enables prioritized shutdowns of non-essential equipment to maximize battery runtime for critical devices (2 groups).

Eaton ABM® battery management technology uses a threestage charging technique that optimizes battery health and extends lifetime by up to 50%.

Up to 4 external hot-swappable battery modules can be added for longer power availability.

Please see the Eaton 5PX Gen2 Technical Specification for detailed battery and physical information

APC Smart-UPS X, Line Interactive, 750VA, Rack/tower convertible 2U, 230V, 8x C13 IEC, Network card, Extended runtime

Intelligent and efficient network power protection from entry level to scalable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.

The world’s most popular network and server UPS. Entry level to scaleable runtime solutions Smart-UPS are ideal for servers, point-of-sale, routers, switches, hubs, and other network devices.


Slim 2U Rack/Tower and 4U Short Depth Convertible Forms Display rotates easily for use in or out of a rack.


High-frequency Design Reduces size of (or eliminates) bulky transformers making installation even easier.


High-Voltage models (2 - 3 kVA) Configurable output from 200 V – 240 V on high-voltage models


Models available with preinstalled network cards Models with “NC” suffix have pre-installed AP9631 network cards with environmental monitoring


Smart external battery connector Accepts external batteries and increases runtime automatically to increase availability


Switched outlet groups Reboot hung devices, shed noncritical loads to conserve runtime, and sequence start-up/turn off


Additional information can be found in the Catalogue PDF file

Operation information can be found in the User Guide PDF file

The APC SRT1000RMXLI delivers high-density, double-conversion on-line power protection with scalable runtime. Designed for critical loads, it combines advanced battery management, flexible installation, and intelligent monitoring to ensure uninterrupted operation in demanding environments.

Key Features of APC SRT1000RMXLI 1000VA/1000W double-conversion on-line pure sine wave 2U rackmount UPS
Ideal for servers, storage, voice/data networks, medical labs, and light industrial applications
Rack/Tower convertible (rail kit included)
Delivers clean power with zero transfer time for critical or sensitive devices
Add up to 10 external battery packs (SRT48RMBP) for extended runtime
Replacement battery available
Battery failure notification for proactive maintenance
ECO Mode for high efficiency without compromising protection
LCD graphics display with text and mimic diagrams
Temperature-compensated battery charging to prolong battery life
Automatic internal bypass for overload or fault conditions
Hot-swappable and user-replaceable batteries
Intelligent battery management with precision charging
Automatic restart of loads after UPS shutdown
LED status indicators for quick status checks
Serial connectivity and network manageable via InfraStruXure Manager
SmartSlot for customized UPS capabilities
Flash upgradeable firmware via FTP
Predictive and disconnected battery notifications
Audible alarms and generator compatibility
Cold-start capability and frequency/voltage regulation
Power conditioning and safety-agency approved
Input power factor correction and resettable circuit breaker
Scalable Runtime Additional runtime can be quickly added as needed with plug-and-play external batteries, ensuring continuous operation during extended outages.

Rack/Tower Convertible Protects your initial investment by allowing easy migration from tower to rack-mount environments with included rail kits and mounting hardware.

Intelligent Battery Management Maximizes performance, life, and reliability of batteries through precision charging and automatic self-testing.

LCD Graphics Display Provides clear visualization of system parameters, operation modes, and alarms for easy monitoring and management.

ECO Mode Bypasses unused electrical components in optimal power conditions, enhancing efficiency without sacrificing protection.

Automatic Internal Bypass Maintains uninterrupted power supply to connected loads in the event of UPS overload or internal fault.

LED Status Indicators Quickly assess unit and power conditions through visible LED indicators.

Network and Serial Connectivity Enables remote power management and centralized control through InfraStruXure Manager compatibility and SmartSlot customization.

Safety and Power Conditioning Protects sensitive equipment from surges, spikes, and other power disturbances while complying with safety agency approvals.

Automatic Load Restart Ensures connected equipment automatically restarts after a UPS shutdown when utility power returns.

Cold-Start Capability Provides temporary battery power in the absence of utility power for emergency startup operations.

Audible Alarms and Notifications Alerts users to changing utility conditions, predictive failures, and disconnected batteries for proactive management.

APC Warranties available for this Product APC Service Pack Warranty Extension
(New Product Purchases) FEWBEXTWAR1YR-SP-01

Purchase 1 Year Warranty FEWBEXTWAR3YR-SP-01

Purchase 3 Year Warranty APC Service Pack Warranty Extension
(Renewal or High Volume) FEWEXTWAR1YR-SP-01

Purchase 1 Year Warranty FEWEXTWAR3YR-SP-01

Purchase 3 Year Warranty Protection for your system, peace of mind for you - With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it. Battery Options for this Product APC Replacement Battery Cartridge - RBC155

This APC Replacement Battery Cartridge fits selected APC Smart-UPS and Back-UPS, restoring power back-up capacity for home offices, small businesses, and IT departments.

This replacement battery cartridge (RBC) has a lifetime of three to five years, offers safe and reliable support to the UPS, and extends the useful life of your UPS. The APC RBC comes fully assembled and includes easy-to-follow replacement instructions, making hot-swap installation simple. Purchase Replacement Battery Cartridge *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

APC External Battery Pack - SRT48RMBP

The APC Extended Run Battery Pack is the ideal companion for the APC Back-UPS Pro UPS (uninterruptible power supply).

The battery pack increases the duration of time that you can protect your electronic devices from damage and disconnect due to unexpected blackouts, voltage fluctuations, and other power disruptions. Purchase External Battery Pack *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

This Product is Compatible with these Mounting Products APC 2-Post Mounting Rail Kit for Smart-UPS SRT - SRTRK3
APC Smart-UPS SRT 19 inch Rail Kit for SRT - SRTRK4
Rack Mounting Bracket for NetBotz Camera Pod 160 - NBAC0302
This Product is Compatible with these Sensors APC Temperature Sensor - AP9335T
APC Temperature & Humidity Sensor - AP9335TH

Advanced protection for IT, Networking, Storage, Telecom, Infrastucture, Industrial and Medical industries

Online double conversion UPS Successor of Eaton 9130 UPS

Performance and Availability

Double-conversion topology. The Eaton 9SX constantly monitors power conditions and regulates voltage and frequency.

The internal bypass allows service continuity in case of internal fault, a maintenance bypass is also available (as option) for easy replacement of the UPS without powering down critical systems.

With a 0.9 power factor the 9SX delivers 28% more power than UPS in its class. It powers more servers than other UPSs with equivalent VA ratings and lower power factors.

Stronger, longer battery life: Eaton ABM® battery management technology uses an innovative three-stage charging technique that extends battery life by up to 50%. 9SX also provides recommended replacement date for batteries.

Manageability

The new graphical LCD provides clear information on the UPS’s status and measurements on a single screen. Enhanced configuration capabilities are also available.

The 9SX can meter energy consumption. kWh values can be monitored using the LCD or Eaton’s Intelligent Power® Software.

Load segment control enables prioritised shutdowns of nonessential equipment to maximise battery runtime for critical devices.

9SX offers Serial, USB connectivity, plus an extra slot for an optional communication card. Eaton’s Intelligent Power® Software seamlessly integrates with leading virtualisation environments and cloud orchestrations tools.

Flexibility

One platform, two factors, dozens of choices. Up to 3000 VA of UPS power is packed into only 2U of rack space. The tower option is about the size of a modern, compact PC.

More runtime can be added with up to 4 external hot-swappable battery modules, able to run systems for hours if necessary. The additional battery modules are automatically recognized by the UPS.

Eaton 9SX 1500 UPS Specifications

1 - Remote Power Off connector
(configurable)

2 - Slot for Management card

  3 - External battery module (EBM) connector
with automatic detection (RJ11)

4 - Relay output

  5 - USB and serial ports


6 - Input/Ouput connections

  Please see the Eaton 9SX Technical Specification for detailed battery and physical information

Advanced protection for IT, Networking, Storage, Telecom, Infrastucture, Industrial and Medical industries

Online double conversion UPS Successor of Eaton 9130 UPS

Performance and Availability

Double-conversion topology. The Eaton 9SX constantly monitors power conditions and regulates voltage and frequency.

The internal bypass allows service continuity in case of internal fault, a maintenance bypass is also available (as option) for easy replacement of the UPS without powering down critical systems.

With a 0.9 power factor the 9SX delivers 28% more power than UPS in its class. It powers more servers than other UPSs with equivalent VA ratings and lower power factors.

Stronger, longer battery life: Eaton ABM® battery management technology uses an innovative three-stage charging technique that extends battery life by up to 50%. 9SX also provides recommended replacement date for batteries.

Manageability

The new graphical LCD provides clear information on the UPS’s status and measurements on a single screen. Enhanced configuration capabilities are also available.

The 9SX can meter energy consumption. kWh values can be monitored using the LCD or Eaton’s Intelligent Power® Software.

Load segment control enables prioritised shutdowns of nonessential equipment to maximise battery runtime for critical devices.

9SX offers Serial, USB connectivity, plus an extra slot for an optional communication card. Eaton’s Intelligent Power® Software seamlessly integrates with leading virtualisation environments and cloud orchestrations tools.

Flexibility

One platform, two factors, dozens of choices. Up to 3000 VA of UPS power is packed into only 2U of rack space. The tower option is about the size of a modern, compact PC.

More runtime can be added with up to 4 external hot-swappable battery modules, able to run systems for hours if necessary. The additional battery modules are automatically recognized by the UPS.

Eaton 9SX 1500 UPS Specifications

1 - Remote Power Off connector
(configurable)

2 - Slot for Management card

  3 - External battery module (EBM) connector
with automatic detection (RJ11)

4 - Relay output

  5 - USB and serial ports


6 - Input/Ouput connections

  Please see the Eaton 9SX Technical Specification for detailed battery and physical information

Eaton's 5 series UPS line, the Eaton 5PX G2 rackmount and tower UPS provides the maximum power possible at each power rating. The 5PX G2 UPS has power ratings ranging from 1 to 3 kVA, with low and high voltage options and offers up to four optional external battery modules for extra runtime. The 5PX G2 UPS has reduced depth to conserve space allowing for high desnisty wallmount rack options, with the 2 to 3 kVA models.

5PX G2 UPS features include:

- Deployment simplified: The 5PX G2 UPS offers mass UPS firmware upgrades without dropping the load and provides an easy startup configuration wizard simplifying your UPS setup process.

- Runtime: Increased standard runtime by at least 25% on 1.5 and 2 kVA models compared to the orginal 5PX UPS

- Stay connected, securely: Reduce risk of intrusion with the optional Gigabit Network Card (NETWORK-M2), which is the first UPS connectivity device to meet both UL and IEC cybersecurity standards

- Enhanced surge protection: The 5PX G2 provides enhanced surge protection keeping your branch offices and IT closets equiment safe

Advanced protection for Servers, Switches, Routers and Storage Devices

Exceptional efficiency, manageability and energy metering capabilities for IT managers

The new Eaton 5PX Gen2 UPS provides Enterprise Networks and Edge IT equipment with best-in-class line-interactive power protection maximising IT space and Service Continuity. Eaton 5PX Gen 2 offers powerful tools to remotely monitor, integrate with IT architecture and remotely deploy / maintain large installed base of UPSs.

Performance and Efficiency

Eaton 5PX Gen 2 provides Unity power factor (W=VA) capability. With 11% more power than other UPS it can protect more servers

Energy Star 2.0 certified, 5PX Gen2 offers best-in-class efficiency performance to reduce energy consumption and cooling costs.

When operating in battery mode the 5PX provides a high-quality output signal for any sensitive equipment connected, such as active PFC (power factor corrected) servers.

Each 5PX Gen2 battery configuration provides the best size/runtime ratio.

Management and Cybersecurity

Innovative graphical LCD display brings all operating information at first sight. It also enhances commissioning and configuration capabilities.

5PX Gen2 Netpack models are delivered with Eaton Gigabit network management card, which provides Dual cybersecurity certifications (UL 2900-1 & IEC 62443-4-2) and enables connection to Eaton Cyber Secured Monitoring solutions

Together with 5PX Gen2, Eaton Gigabit network management card allows both remote UPS settings and remote firmware upgrade to ensure easy deployment (fleet management) and reduced maintenance cost.

5PX Gen2 meters energy consumption right down to the managed outlet groups. kWh values can be monitored using the LCD or Eaton’s Intelligent Power Software.

Eaton’s Intelligent Power Software seamlessly integrates with leading virtualization environments and cloud orchestration tools.

Availability and Flexibility

5PX Gen2 2200VA & 3000VA are available in RT2U format (optimized for rack mounting) or RT3U (for tower installation or short-depth racks). Pedestals and rail kits are included with all models.

5PX Gen2 load segment control enables prioritized shutdowns of non-essential equipment to maximize battery runtime for critical devices (2 groups).

Eaton ABM® battery management technology uses a threestage charging technique that optimizes battery health and extends lifetime by up to 50%.

Up to 4 external hot-swappable battery modules can be added for longer power availability.

Please see the Eaton 5PX Gen2 Technical Specification for detailed battery and physical information

APC’s SMT1500RMI2UNC is part of the award-winning Smart-UPS family, the most popular UPS series worldwide for servers, storage, and networks.

The 2U rackmount 1000W / 1500VA Line Interactive UPS protects critical data and equipment from power issues, providing clean, reliable network-grade power.

Smart-UPS units are renowned for reliability and manageability, with exceptionally high efficiency at varying load levels—ideal for modern multi-core and virtualized servers.

Includes: CD with software, Documentation CD, Installation guide, Rack mounting support rails, Smart UPS signalling RS-232 cable, Temperature probe, USB cable.

Key Features of APC Smart-UPS 1500VA w/ Network Card: Alphanumeric LCD (Liquid Crystal Display): Intuitive interface provides detailed and accurate information with local configuration capability.
Communication Ports: Serial, USB, and SmartSlot™ for accessory cards.
4 IEC320 C13 Outlets
Battery Disconnect: Convenient battery disconnection for safe transport.
Push Button Circuit Breaker: Enables quick recovery from overloads.
Network-Grade Power: Filters noise, provides automatic voltage regulation (AVR), and surge protection for stable performance.
High Efficiency Green Mode: Reduces utility costs and heat generation for longer component life.
Advanced Battery Management: Temperature-compensated charging extends battery life; advanced algorithms recommend replacement timing.
Smart-UPS Display
Intuitive, easy-to-use LCD interface.

LCD Display Screen: Clear, detailed information via basic or advanced menus.

Power Status: Operating mode and efficiency
Load VA / Watts / Amps
Input / Output voltage and frequency
Battery capacity and runtime
Energy meter and more
Control: UPS and outlet group settings

Language: Multiple selectable interface languages

Power Quality Settings: Configurable thresholds and alarms

Test and Diagnostics: Run battery and runtime calibration tests

Logs: Review last 10 transfers and faults

About: View UPS details, serial numbers, and battery replacement data

Online Status Indicators: LEDs for Online, On Battery, Fault, and Replace Battery

Escape / Return / Navigation: Menu navigation and setting confirmation. APC UPS Network Management Card 3 (NMC3) provides secure remote monitoring and control of an individual APC UPS via web browser, CLI, or SNMP. Configurable notifications ensure prompt alerts when issues arise.

Main Features of NMC3 EcoStruxure IT Integration: Efficient equipment monitoring and management.
Network Management System (NMS) Compatible: Integrates UPS data with preferred NMS platforms.
Environmental Monitoring & Modbus Support: Enables remote monitoring with EcoStruxure IT integration.
Reboot Equipment Remotely: Restore network availability without dispatching technicians.
Smart Battery Management: Provides detailed insight into battery health and performance.
PowerChute Network Shutdown Software: Supports advanced operating system shutdown capabilities.
Flash Upgradeable Firmware: Allows convenient remote installation of firmware updates.
APC Warranties available for this Product APC Service Pack Warranty Extension
(New Product Purchases) FEWBEXTWAR1YR-SP-03

Purchase 1 Year Warranty FEWBEXTWAR3YR-SP-03

Purchase 3 Year Warranty APC Service Pack Warranty Extension
(Renewal or High Volume) FEWEXTWAR1YR-SP-03

Purchase 1 Year Warranty FEWEXTWAR3YR-SP-03

Purchase 3 Year Warranty Protection for your system, peace of mind for you - With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it. Battery Options for this Product APC Replacement Battery Cartridge - SMT1500RMI2UNC

This APC Replacement Battery Cartridge fits selected APC Smart-UPS and Back-UPS, restoring power back-up capacity for home offices, small businesses, and IT departments.

This replacement battery cartridge (RBC) has a lifetime of three to five years, offers safe and reliable support to the UPS, and extends the useful life of your UPS. The APC RBC comes fully assembled and includes easy-to-follow replacement instructions, making hot-swap installation simple. Purchase Replacement Battery Cartridge *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

The APC SRT1500XLI Smart-UPS delivers dependable, high-density power protection for essential electronics and IT equipment. Designed to ensure operational continuity in environments such as servers, voice/data networks, medical labs, and light industrial setups, this 1500VA UPS provides double-conversion online performance with scalable runtime capabilities.

Key Features of APC SRT1500XLI Smart-UPS 1500VA/1500W double-conversion on-line pure sine wave tower UPS
Rack/Tower convertible design (rail kits SRTRK2 or SRTRK3 sold separately)
Delivers zero transfer time for uninterrupted power to critical devices
Expandable runtime with up to 10 external battery packs (SRT48BP)
High-efficiency “Green Mode” operation for reduced energy costs
Ideal for servers, storage, medical, and industrial applications
Best-in-Class Power Density Provides more real power in watts, with a 0.9 power factor on 2.2–5 kVA units and unity on 1–1.5 kVA and 6–10 kVA models. This allows for maximum power delivery to connected equipment.

High-Efficiency “Green Mode” Operates at up to 98% efficiency to minimize power and cooling costs while maintaining full protection and reliability.

Graphical LCD Display Features an intuitive, multicolor backlit interface providing system status, configuration options, and performance data at a glance.

Intelligent Battery Management Utilizes temperature-compensated charging to extend battery life. Advanced algorithms predict battery replacement needs and detect additional battery packs automatically.

Built-In Energy Meter Tracks energy usage and efficiency across operating modes for precise monitoring and management of power performance.

Operate Without Battery Ensures immediate protection for connected equipment upon power restoration, even after a complete battery discharge.

Automatic Internal Bypass Maintains uninterrupted power to connected loads during overloads or UPS faults by switching to utility power.

Scalable Runtime Allows the quick addition of external battery packs to increase runtime, meeting longer uptime requirements when needed.

Hot-Swappable Batteries Provides seamless power continuity while batteries are replaced, ensuring no downtime for connected systems.

Automatic Restart Restores power automatically to connected devices once utility power returns after an outage.

LED Status Indicators Gives clear visual signals for system operation, battery condition, and alerts.

SmartSlot for Expansion Supports optional network management cards, enabling remote monitoring and control through EcoStruxure IT or PowerChute Network Shutdown.

Cold-Start Capability Provides temporary battery power when utility power is unavailable, ensuring startup in blackout conditions.

Generator Compatible Ensures stable, uninterrupted power output when operating on generator supply.

I/O Diagram and Detials Part Details SmartSlot Connects to optional management accessories for enhanced monitoring and control.


AC C14 Input Plug Provides secure AC input connection to the UPS system.


External Battery Connector Connects external battery packs (XLBP) to extend runtime during outages, auto-detected by the UPS.


Controllable Outlet Group 1 Allows management and control of connected devices independently.


Chassis Ground Screw Provides a safe grounding connection for the UPS and connected batteries.


Controllable Outlet Group 2 Additional outlet group for segmenting connected loads.


EPO Terminal Supports Emergency Power Off integration for centralized power shutdown control.


Serial Com Port Enables communication and monitoring through compatible APC interface cables.


USB Port Facilitates direct communication with servers or UPS management software.


APC Warranties available for this Product APC Service Pack Warranty Extension
(New Product Purchases) FEWBEXTWAR1YR-SP-01

Purchase 1 Year Warranty FEWBEXTWAR3YR-SP-01

Purchase 3 Year Warranty APC Service Pack Warranty Extension
(Renewal or High Volume) FEWEXTWAR1YR-SP-01

Purchase 1 Year Warranty FEWEXTWAR3YR-SP-01

Purchase 3 Year Warranty Protection for your system, peace of mind for you - With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it. Battery Options for this Product APC Replacement Battery Cartridge - APCRBC155

This APC Replacement Battery Cartridge fits selected APC Smart-UPS and Back-UPS, restoring power back-up capacity for home offices, small businesses, and IT departments.

This replacement battery cartridge (RBC) has a lifetime of three to five years, offers safe and reliable support to the UPS, and extends the useful life of your UPS. The APC RBC comes fully assembled and includes easy-to-follow replacement instructions, making hot-swap installation simple. Purchase Replacement Battery Cartridge *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

APC External Battery Pack - SRT48BP

The APC Extended Run Battery Pack is the ideal companion for the APC Back-UPS Pro UPS (uninterruptible power supply).

The battery pack increases the duration of time that you can protect your electronic devices from damage and disconnect due to unexpected blackouts, voltage fluctuations, and other power disruptions. Purchase External Battery Pack *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

This Product is Compatible with these Mounting Products APC 2-Post Mounting Rail Kit for Smart-UPS SRT - SRTRK3
APC Smart-UPS SRT 19 inch Rail Kit for SRT - SRTRK4
This Product is Compatible with these Sensors APC Temperature Sensor - AP9335T
APC Temperature & Humidity Sensor - AP9335TH

Advanced protection for Servers, Switches, Routers and Storage Devices

Exceptional efficiency, manageability and energy metering capabilities for IT managers

The new Eaton 5PX Gen2 UPS provides Enterprise Networks and Edge IT equipment with best-in-class line-interactive power protection maximising IT space and Service Continuity. Eaton 5PX Gen 2 offers powerful tools to remotely monitor, integrate with IT architecture and remotely deploy / maintain large installed base of UPSs.





Performance and Efficiency

Eaton 5PX Gen 2 provides Unity power factor (W=VA) capability. With 11% more power than other UPS it can protect more servers

Energy Star 2.0 certified, 5PX Gen2 offers best-in-class efficiency performance to reduce energy consumption and cooling costs.

When operating in battery mode the 5PX provides a high-quality output signal for any sensitive equipment connected, such as active PFC (power factor corrected) servers.

Each 5PX Gen2 battery configuration provides the best size/runtime ratio.





Management and Cybersecurity

Innovative graphical LCD display brings all operating information at first sight. It also enhances commissioning and configuration capabilities.

5PX Gen2 Netpack models are delivered with Eaton Gigabit network management card, which provides Dual cybersecurity certifications (UL 2900-1 & IEC 62443-4-2) and enables connection to Eaton Cyber Secured Monitoring solutions

Together with 5PX Gen2, Eaton Gigabit network management card allows both remote UPS settings and remote firmware upgrade to ensure easy deployment (fleet management) and reduced maintenance cost.

5PX Gen2 meters energy consumption right down to the managed outlet groups. kWh values can be monitored using the LCD or Eaton’s Intelligent Power Software.

Eaton’s Intelligent Power Software seamlessly integrates with leading virtualization environments and cloud orchestration tools.





Availability and Flexibility

5PX Gen2 2200VA & 3000VA are available in RT2U format (optimized for rack mounting) or RT3U (for tower installation or short-depth racks). Pedestals and rail kits are included with all models.

5PX Gen2 load segment control enables prioritized shutdowns of non-essential equipment to maximize battery runtime for critical devices (2 groups).

Eaton ABM® battery management technology uses a threestage charging technique that optimizes battery health and extends lifetime by up to 50%.

Up to 4 external hot-swappable battery modules can be added for longer power availability.

Please see the Eaton 5PX Gen2 Technical Specification for detailed battery and physical information

APC’s SMX1500RMI2U is part of the award winning Smart-UPS family which is the most popular UPS in the world for servers, storage and networks.

The 1200W 1500VA extended runtime UPS is trusted to protect critical data and equipment from power problems, and supplies clean and reliable network-grade power. In addition to legendary reliability and manageability, Smart-UPS units have extremely high efficiency at low, medium and high load levels, making them ideal for today’s multi-core or virtualized servers that have varying load consumption.

Includes : CD with software , Documentation CD , Installation guide , Rack Mounting support rails , Removable support feet , Smart UPS signalling RS-232 cable , USB cable




Product Features:

1. Alphanumeric LCD (Liquid Crystal Display) Intuitive interface provides detailed and accurate information with the ability to configure locally.

2. Communication Ports: Serial, USB, and SmartSlot™ for accessory cards.

3. 8 IEC320 C13 Outlets in 3 Groups

4. Push Button Circuit Breaker enables quick recovery from overloads.

5. Emergency Power Off (EPO): Provides for remote UPS shut-off in the event of a fire or other emergency

6. Network-grade Power: Provides most stable power conditions by filtering noise, automatic voltage regulation (AVR), and surge protection.

7. High Efficiency Green Mode: Saves utility costs and reduces heat promoting longer component life.

8. Advanced Battery Management: Temperature-compensated charging extends life and advanced algorithms recommend replacement date

Additional Features:

1. Slim 2U Rack/Tower Convertible Form: Display rotates easily for use in or out of a rack.

2. High-frequency Design: Reduces size of (or eliminates) bulky transformers making installation even easier.

3. Smart External Battery Connector: Accept external batteries and increases runtime automatically to increase availability.

4. Switched Outlet Groups: Reboot hung devices, shed non-critical loads to conserve runtime, and sequence start-up/turn off.


Smart-UPS Display
Intuitive, easy-to-use LCD interface

LCD Display Screen - Clear, consistent, and detailed information in your choice of basic or advanced menus.

Power Status:
Operating mode and efficiency
Load VA/Watts/Amps
Input/Output voltage and frequency
Battery capacity and runtime
Energy meter and more
Control - UPS and outlet group settings
Language

Power quality settings

Alarm, delay and threshold settings

Test and Diagnostics - Initiate battery and runtime calibration tests

Logs - See explanation of last 10 transfers and faults

About - UPS and replacement battery part numbers, serial numbers, battery install, and suggested replacement dates

Online Status Indicators - Online, on battery, fault, and replace battery LEDs for quick status identification.

Escape - Exits to the previous menu or screen.

Return - Used to enter or confirm settings.

Navigation Arrows - Allow for quick adjustment of settings.
APC Warranties available for this UPS APC Service Pack Warranty Extension
(New Product Purchases) FEWBEXTWAR1YR-SP-03

Purchase 1 Year Warranty FEWBEXTWAR3YR-SP-03

Purchase 3 Year Warranty APC Service Pack Warranty Extension
(Renewal or High Volume) FEWEXTWAR1YR-SP-03

Purchase 1 Year Warranty FEWEXTWAR3YR-SP-03

Purchase 3 Year Warranty Protection for your system, peace of mind for you - With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it. Battery Options for this Product APC Replacement Battery Cartridge - APCRBC115

This APC Replacement Battery Cartridge fits selected APC Smart-UPS and Back-UPS, restoring power back-up capacity for home offices, small businesses, and IT departments.

This replacement battery cartridge (RBC) has a lifetime of three to five years, offers safe and reliable support to the UPS, and extends the useful life of your UPS. The APC RBC comes fully assembled and includes easy-to-follow replacement instructions, making hot-swap installation simple. Purchase Replacement Battery Cartridge *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

APC External Battery Pack - SMX48RMBP2U

The APC Extended Run Battery Pack is the ideal companion for the APC Back-UPS Pro UPS (uninterruptible power supply).

The battery pack increases the duration of time that you can protect your electronic devices from damage and disconnect due to unexpected blackouts, voltage fluctuations, and other power disruptions. Purchase External Battery Pack *This product is generally delivered next day but due to its weight and restrictions imposed on us by next day couriers, may take longer

Intelligent, efficient network power protection designed for IT professionals managing distributed environments. This short-depth, 2U convertible rackmount UPS delivers pure-sine power and advanced battery management to minimise maintenance and reduce total cost of ownership while enabling remote monitoring and proactive management across edge and back-office deployments.

Key Features of APC Smart-UPS with Lithium-ion High-efficiency Green Mode for reduced utility and cooling costs.
Intelligent battery management system with cell-level monitoring.
Network-grade power: AVR, surge protection and noise filtering.
Operate without battery capability to protect equipment when battery is fully discharged.
Intuitive LCD interface for local configuration and status.
Built-in energy meter for tracking consumption and operational efficiency.
Pure sine wave output on battery for compatibility with active PFC servers and sensitive electronics.
Short-depth rack compatibility for tight rack spaces and improved cable management.
Single switched outlet group for discrete reboot, sequenced on/off and load shedding.
SmartConnect remote monitoring for automatic notifications and firmware updates.
SmartSlot for optional management cards and expanded capabilities.
Predictive battery replace-date and predictive failure notifications to aid maintenance planning.
Hot-swappable and user-replaceable battery design to reduce mean time to repair.
Adjustable voltage sensitivity and transfer points for generator or specific-site tuning.
Automatic self-test, power conditioning and automatic restart of loads after utility return.
Efficiency and Operating Modes Green Mode bypasses unused power components in favourable utility conditions to achieve very high operating efficiency without compromising protection. High online efficiency reduces utility consumption and lowers thermal load in racks.

Battery and Charging Intelligence Lithium-ion chemistry paired with a temperature-compensated, precision charging system and cell-level monitoring increases service life, reduces weight and footprint, and provides dynamic prediction of recommended replacement windows to support long-term planning.

Power Quality and Conditioning Built-in surge protection, automatic voltage regulation (AVR) and noise filtering deliver stable, clean power to sensitive network and server equipment, improving uptime and reducing risk of hardware faults from power disturbances.

Manageability and Remote Monitoring Native network manageability and SmartConnect enable cloud-based remote monitoring, firmware updates, diagnostics and proactive alerts. The SmartSlot expansion provides options for network management cards and additional integrations with centralized management platforms.

Local Interface and Telemetry An intuitive LCD presents detailed status, configuration menus and telemetry. The built-in energy meter displays kWh usage and efficiency metrics to support energy-conscious deployments and operational reporting.

Serviceability and Availability Hot-swappable and user-replaceable battery options, resettable circuit protection and predictive fault notifications support rapid recovery and reduce downtime during maintenance events.

Deployment Flexibility Short-depth rack compatibility and tower-convertible form factor let the unit fit into constrained racks or edge locations, providing flexible installation choices for IDF/MDF closets, network closets and small data rooms.

Compatibility and Integration Pure sine wave output on battery ensures broad compatibility with active PFC servers, virtualised hosts and sensitive electronics. Integration options include network management cards, PowerChute graceful shutdown workflows and compatibility with centralized monitoring platforms.

Operational Resilience Automatic self-tests, power conditioning and automatic restarts after utility return reduce manual intervention and help maintain continuous operation for critical infrastructure.

This Product is Compatible with these Mounting Products APC SmartUPS/SmartUPS RT 2 Post Rail Kits - AP9625
APC Smart-UPS SMTL Tower Mounting Stabilizing Feet - SMTL2USF
This Product is Compatible with these Sensors APC Temperature Sensor, 13 ft - AP9335T
APC Temperature & Humidity Sensor - AP9335TH

The Eaton 9PX1000IRTNBS UPS Netpack is a versatile and efficient power management solution designed for both rack and tower configurations. Here are the key specifications:

Power Capacity: 1000 VA / 1000 W
Input: C14
Outputs: 8 x C13
Form Factor: 2U, suitable for both rack and tower setups
Network Card: Included
Input Cord: BS input cord
This UPS is ideal for ensuring reliable power supply and protection for your critical systems.

Please see the Eaton 9PX Technical Specification for detailed battery and physical information

APC Smart-UPS On-Line, 1500VA/1500W, Rackmount 2U, 230V, 6x C13 IEC outlets, SmartSlot, Extended runtime, W/ rail kit

This product is part of the Smart-UPS On-Line range that provides high density, true double-conversion on-line power protection. This 1500VA/1500W On-line pure sine wave UPS provides scalable runtime while minimizing maintenance. The SRT is a 2U rack/tower convertible UPS that is external battery compatible for more runtime during prolonged outages. 

The UPS has an optional Network Management Card for network-based monitoring and PowerChute Business Edition for unattended shutdown. It comes with IEC 60320 C14 input, 6x IEC 320 C13 and 6x IEC 320 C13 outlets. 

The UPS has a 3-year warranty, and the built-in lead-acid battery has a 2-year warranty. Its dimensions are 432mm (depth) x 85mm (height) x 505mm (width) and weighs 21.00kg. Ideal for servers, voice/data networks, medical labs, and light industrial applications. It conforms to CE and EAC. Designed for IT professionals or network administrators providing wide input voltage window, tight output voltage regulation, frequency regulation, internal bypass, and input power factor correction.

Key Features: 1500VA/1500W double-conversion on-line pure sine wave 2U rackmount UPS



Ideal for servers, storage, voice/data networks, medical labs, and light industrial applications

Rack/Tower convertible (rail kit included)

Delivers clean power with zero transfer time for critical or sensitive devices

Add up to 10 external battery packs (SRT48BP) for extended runtime


Best-in-class power density



More real power in watts, 0.9 pf on 2.2 kVA – 5 kVA, Unity on 1-1.5 kVA unites and 6 kVA – 10 kVA units.


High-efficiency “green mode”



Achieves 98 percent efficiency, which saves utility and cooling costs without compromising performance or reliability.


Graphical LCD display with multicolor backlight



Intuitive interface provides detailed and accurate information with ability to configure locally.


Intelligent battery management



Temperature-compensated charging extends life and advanced algorithms recommend replacement date. The UPS can inform user which batteries need to be replaced and auto detect when additional battery packs are added.


Built-in energy meter



Measures energy use and displays UPS efficiency in various modes of operation for easy energy tracking.


Operate without battery



Ability to immediately protect equipment when power returns after a complete discharge of the battery


Three-year warranty on electronics



Additional year of warranty protection for electronics provides peace of mind.


Product Diagram:



1. SmartSlot
The SmartSlot can be used to connect optional management accessories.



2. AC C14 input plug
Inlet for AC input power cord.



 



3. External battery power and communication connector
Use the external battery cable on the XLBP to connect the UPS and XLBP. XLBPs provide extended runtime during power outages. The UPS will automatically recognize up to 10 external battery packs.



4. Controllable outlet group 1
Connect electronic devices to these outlets.



 



5. Chassis ground screw
The UPS and XLBPs have ground screws for connecting the ground leads. Prior to connecting a ground lead, disconnect the UPS from mains power.



6. Controllable outlet group 2
Connect electronic devices to these outlets



 



7. EPO terminal
The Emergency Power Off (EPO) terminal allows the user to connect the UPS to a central EPO system.



9. Serial Com
The Serial Com port is used to communicate with the UPS. Use only interface kits supplied or approved by APC by Schneider Electric. Any other serial interface cable will be incompatible with the UPS connector.



 



10. USB port
The USB port is used to connect either a server for native operating system communications, or for software to communicate with the UPS.








 



 

Additional information can be found in the Brochure PDF file

Installation information can be found in the User Guide PDF file