Salicru UPS Uninterruptible Power Supply

Effective protection for entry-level servers and IT equipment

Salicru's SPS 3000 Advance RT2 3000 VA UPS features line-interactive technology with sine-wave output voltage and convertible tower/rack format, which has a height of only 2U. In addition, its output power factor of 0.9 and compatibility with APFC (active power factor correction) type loads make it the best option for any type of load that requires protection.

In terms of communications, it features an RS-232/USB interface (compatible with HID protocol) and a smart slot that can optionally hold an SNMP card, MODBUS or potential-free contacts; also available are software packages for local or virtual monitoring and management of protected devices.

Other outstanding features include: solutions for applications with long backup (by means of equipment with extra chargers and additional battery modules), swivel mount display and adapters (pedestal and lugs) for placing in tower or rack formats and programmable outputs (critical/non-critical loads) to extend the available backup.

Features

Line-interactive technology with sine-wave output.
Permanent AVR stabilisation.
Output power factor PF=0.9.
Control panel with swivel mount LCD display and keypad.
Convertible tower/rack format (2U).
Includes pedestal (pedestal mount) and lugs (rack mount).
Backup extensions available for all power ratings.
UPS models with extra charger for backup extensions.
RS-232/USB-HID interface.
Downloadable monitoring software for Windows, Linux and Mac.
Smart slot for SNMP/potential-free contacts/MODBUS.
ADSL/fax/modem protection.
EPO – emergency power off.
Programmable outputs for critical/non-critical loads.
Manual and automatic battery test.
Smart battery charger to shorten average recharging times.
Battery recharging with device turned off.
SLC Greenergy solution.
Display

Configuration values, fault codes and remaining backup.
Level of battery available.
Level of load connected.
Input values (current, voltage and frequency).
Output and battery values (current, voltage and frequency).
Operating mode.


Applications

The features of the SPS ADVANCE RT2 series make it a versatile solution for protecting a wide range of IT equipment such as basic servers, routers, switches, hubs and point-of-sale with high power density requirements and/or rack installation of servers/ communications.

Connections

Connection for battery module (only in models with extra charger).
ADSL/fax/modem transient protector.
Emergency stop (EPO).
USB interface.
Socket IEC C19 (only for 3000 VA model).
Resettable thermal cutoff (fuse for 800 and 1100 VA models).
Plug (IEC 14 for 800, 1100 and 1500 VA models; IEC 20 for 2000 and 3000 VA models).
Fan.
RS-232 interface.
Smart slot for SNMP/potential-free contacts/ MODBUS.
Sockets (8 x IEC 13), programmable critical (x4) / non-critical (x4).


Technical Specification

MODEL SPS 3000 ADVANCE RT2 UPS Power (VA / W) 3000 / 2700 Technology Line-interactive with sine-wave output Format Convertible tower/rack (2U) Outlets AC outlets 8 x power IEC 60320 C13 ¦ 1 x power IEC 60320 C19 Input Rated Voltage 208 / 220 / 230 / 240 V Voltage range 170 - 280 V up to 100% load Stabiliser AVR (buck-boost) Frequency 50 / 60 Hz ±5% Input protection Resettable thermal cutoff Output Rated voltage 208 / 220 / 230 / 240 V Voltage accuracy (battery mode) ±1.5% Power factor 0.9 Waveform Pure sine wave Total harmonic distortion (THDv) ?2% linear load;
?5% non-linear load Admissible overload Online mode < 120% off at 5 min / < 150% off at 10 s Battery mode < 120% off at 1 min / < 150% off at 10 s Programmable sockets Yes, for critical / non-critical loads (4/4) Frequency 50/60 Hz (same as input)±0.1% Efficiency On-line mode >95% Stabiliser mode (AVR) >92% Battery mode >80% Battery Battery type Pb-Ca sealed, AGM, maintenance-free Protection Against power surges, undervoltages and alternating current components Battery test Automatic on every start + one times a week Charging Charge type I/U (constant current/constant voltage) Recharge time 4 hours to 90% Communication Interface RS-232/USB-HID Smart slot for SNMP / potential-free contacts / MODBUS Yes Downloadable monitoring software For Windows, Linux and Mac Other Functions Cold start (start-up from batteries) Yes Emergency power off (EPO) Yes ADSL/fax/modem transient protector Yes Green-function Yes, automatic stop in battery mode with load <5% Smart fan speed Yes, smart control of fan speed Site wiring fault Yes, error detection of phase-neutral rotation and/or absence of earth General Operating temperature 0ºC - 40ºC Relative humidity Up to 95%, non-condensing Noise level at 1 metre Less 45 dB Dimensions (D x W x H mm) 630 x 428 x 88 (2U)  Weight 29.30Kg Standards Safety EN 62040-1:2008 Electromagnetic compatibility (EMC) EN 62040-2:2006(C2) Operation EN 62040-3:2011 Quality & Environmental Management ISO-9001 and ISO-14001

Salicru's SLC 3000 TWIN PRO2 3000VA UPS tower is equipped with on-line double-conversion technology and the latest features to make it an advanced protection system for sensitive and critical loads.

High output power factor (PF=0.9) ensures availability to all types of loads, full control through status information via LCD display and keypad, extensive monitoring and communication options via the built-in USB HID interface, an intelligent slot for SNMP cards or relays and a wide range of software packages. Free monitoring version downloadable for Windows, Linux, Unix or Mac and packages available for multi servers or virtualised systems.

For facilities that require more back-up time, there is a possibility of backup extensions using UPSs with extra charger and additional battery modules. Also notable is the possibility of Eco-mode operation to improve the efficiency of the device, EPO (emergency power off) functions, operation as a frequency converter and built-in battery test.

Features

3000 VA of Power
4 x C13 and 1 x C19 IEC outlet sockets
On-line double-conversion technology.
Output power factor PF=0.9.
Control panel with LCD screen and keypad.
Tower format.
Backup extensions available for all power ratings.
UPS models with extra charger for backup extensions.
USB HID interface for all models as standard.
Downloadable monitoring software for Windows, Linux, Unix and Mac.
Intelligent slot for SNMP/relays.
Eco-mode operation.
Automatic frequency detector.
Frequency conversion function. EPO – emergency power off.
Manual and/or automatic programmable battery test.
Smart battery charger to shorten average recharging times.
Battery recharging with device turned off.
SLC Greenergy solution.
Applications

Power supply failures in IT systems can cause losses as a result of downtime and the time taken to restore the system to normal operation, and damage to network hardware. Many other disturbances (micro power outages, voltage fluctuations, frequency variations, harmonics, transients, etc.) can also cause IT environments to malfunction.

Display

Level of battery available.
Level of load connected.
Operation/alarm/fault status.
Input voltage and frequency.
Output voltage and frequency.
Settings mode.


Communications

USB HID UPS: Enables control, parameter configuration and computer shutdown/ hibernation via the USB port. Available with Windows, Linux for Mac. UPS monitoring and management software for closing files/applications in Windows, Linux, Unix and Mac environments. Free and downloadable from Salicru.

Intelligent slot for connecting SNMP or optocoupler cards.

Salicru Warranty

Online registration at Salicru.
2-year warranty.
Batteries covered by the warranty.
Telephone technical support.
Technical Specification

MODEL SLC 3000 TWIN PRO2 UPS Power (VA / W) 3000 / 2700 Technology On-line double-conversion Format Tower Ports AC outlets 1 x power IEC 60320 C19 ¦ 4 x power IEC 60320 C13 Input Rated Voltage 220 / 230 / 240 V Voltage range 100% load 176 - 300V Voltage range 40% load 100 - 300V Power Factor ?0.99 Frequency 50 / 60 Hz ±10% Input protection Resettable breaker Output Rated voltage 220 / 230 / 240 V Voltage accuracy (battery mode) ±1% Waveform (battery mode) Pure sinusoidal Total harmonic distortion (THDv) <2% Synchronous range ±10% Battery mode frequency accuracy ±0.05 Hz Synchronous speed 1 Hz/s Performance On-line >89% ÷ 92% Eco-mode >98% Admissible
overloads On-line mode 105% constant / 130% for 60 s / 150% for 10 s Battery mode 105% constant / 130% for 10 s / 150% for 1 s Bypass mode 130% constant / 180% for 60 s Battery Battery type Pb-Ca sealed, AGM, maintenance-free Protection Against power surges, undervoltages and alternating current components Battery test Manual and/or automatic programmable Charging Charge type I/U (constant current/constant voltage) Recharge time 4 hours to 90% Communication Interface USB (HID protocol) Slot for SNMP/relays Yes Downloadable monitoring software For Windows, Unix, Linux and Mac Operating Modes On-line double-conversion Yes Eco-mode Yes Frequency converter (CVCF) Yes, Up to 60% of the load General Operating temperature 0ºC - 40ºC Relative humidity Up to 95%, non-condensing Noise level at 1 metre ?49 dB (100% load) / ?41 dB (60% load) Dimensions (D x W x H mm) 399 x 190 x 327 Weight 22.70Kg Standards Safety EN 62040-1:2008+A1:2013 Electromagnetic compatibility (EMC) EN 62040-2 Operation VFI in accordance with EN 62040-3 Quality & Environmental Management ISO-9001 and ISO-14001

Effective protection for entry-level servers and IT equipment

Salicru's SPS 1500 Advance RT2 1500 VA UPS features line-interactive technology with sine-wave output voltage and convertible tower/rack format, which has a height of only 2U. In addition, its output power factor of 0.9 and compatibility with APFC (active power factor correction) type loads make it the best option for any type of load that requires protection.

In terms of communications, it features an RS-232/USB interface (compatible with HID protocol) and a smart slot that can optionally hold an SNMP card, MODBUS or potential-free contacts; also available are software packages for local or virtual monitoring and management of protected devices.

Other outstanding features include: solutions for applications with long backup (by means of equipment with extra chargers and additional battery modules), swivel mount display and adapters (pedestal and lugs) for placing in tower or rack formats and programmable outputs (critical/non-critical loads) to extend the available backup.

Features

Line-interactive technology with sine-wave output.
Permanent AVR stabilisation.
Output power factor PF=0.9.
Control panel with swivel mount LCD display and keypad.
Convertible tower/rack format (2U).
Includes pedestal (pedestal mount) and lugs (rack mount).
Backup extensions available for all power ratings.
UPS models with extra charger for backup extensions.
RS-232/USB-HID interface.
Downloadable monitoring software for Windows, Linux and Mac.
Smart slot for SNMP/potential-free contacts/MODBUS.
ADSL/fax/modem protection.
EPO – emergency power off.
Programmable outputs for critical/non-critical loads.
Manual and automatic battery test.
Smart battery charger to shorten average recharging times.
Battery recharging with device turned off.
SLC Greenergy solution.
Display

Configuration values, fault codes and remaining backup.
Level of battery available.
Level of load connected.
Input values (current, voltage and frequency).
Output and battery values (current, voltage and frequency).
Operating mode.


Applications

The features of the SPS ADVANCE RT2 series make it a versatile solution for protecting a wide range of IT equipment such as basic servers, routers, switches, hubs and point-of-sale with high power density requirements and/or rack installation of servers/ communications.

Connections

Connection for battery module (only in models with extra charger).
ADSL/fax/modem transient protector.
Emergency stop (EPO).
USB interface.
Socket IEC C19 (only for 3000 VA model).
Resettable thermal cutoff (fuse for 800 and 1100 VA models).
Plug (IEC 14 for 800, 1100 and 1500 VA models; IEC 20 for 2000 and 3000 VA models).
Fan.
RS-232 interface.
Smart slot for SNMP/potential-free contacts/ MODBUS.
Sockets (8 x IEC 13), programmable critical (x4) / non-critical (x4).


Technical Specification

MODEL SPS 1500 ADVANCE RT2 UPS Power (VA / W) 1500 / 1350 Technology Line-interactive with sine-wave output Format Convertible tower/rack (2U) Outlets AC outlets 8 x power IEC 60320 C13 AC outlet type IEC 60320 C13 Input Rated Voltage 208 / 220 / 230 / 240 V Voltage range 170 - 280 V up to 100% load Stabiliser AVR (buck-boost) Frequency 50 / 60 Hz ±5% Input protection Resettable thermal cutoff Output Rated voltage 208 / 220 / 230 / 240 V Voltage accuracy (battery mode) ±1.5% Power factor 0.9 Waveform Pure sine wave Total harmonic distortion (THDv) ?2% linear load;
?5% non-linear load Admissible overload Online mode < 120% off at 5 min / < 150% off at 10 s Battery mode < 120% off at 1 min / < 150% off at 10 s Programmable sockets Yes, for critical / non-critical loads (4/4) Frequency 50/60 Hz (same as input)±0.1% Efficiency On-line mode >95% Stabiliser mode (AVR) >92% Battery mode >80% Battery Battery type Pb-Ca sealed, AGM, maintenance-free Protection Against power surges, undervoltages and alternating current components Battery test Automatic on every start + one times a week Charging Charge type I/U (constant current/constant voltage) Recharge time 4 hours to 90% Communication Interface RS-232/USB-HID Smart slot for SNMP / potential-free contacts / MODBUS Yes Downloadable monitoring software For Windows, Linux and Mac Other Functions Cold start (start-up from batteries) Yes Emergency power off (EPO) Yes ADSL/fax/modem transient protector Yes Green-function Yes, automatic stop in battery mode with load <5% Smart fan speed Yes, smart control of fan speed Site wiring fault Yes, error detection of phase-neutral rotation and/or absence of earth General Operating temperature 0ºC - 40ºC Relative humidity Up to 95%, non-condensing Noise level at 1 metre Less 45 dB Dimensions (D x W x H mm) 510 x 438 x 88 (2U)  Weight 19.50Kg Standards Safety EN 62040-1:2008 Electromagnetic compatibility (EMC) EN 62040-2:2006(C2) Operation EN 62040-3:2011 Quality & Environmental Management ISO-9001 and ISO-14001

Effective protection for entry-level servers and IT equipment

Salicru's SPS 2000 Advance RT2 2000 VA UPS features line-interactive technology with sine-wave output voltage and convertible tower/rack format, which has a height of only 2U. In addition, its output power factor of 0.9 and compatibility with APFC (active power factor correction) type loads make it the best option for any type of load that requires protection.

In terms of communications, it features an RS-232/USB interface (compatible with HID protocol) and a smart slot that can optionally hold an SNMP card, MODBUS or potential-free contacts; also available are software packages for local or virtual monitoring and management of protected devices.

Other outstanding features include: solutions for applications with long backup (by means of equipment with extra chargers and additional battery modules), swivel mount display and adapters (pedestal and lugs) for placing in tower or rack formats and programmable outputs (critical/non-critical loads) to extend the available backup.

Features

Line-interactive technology with sine-wave output.
Permanent AVR stabilisation.
Output power factor PF=0.9.
Control panel with swivel mount LCD display and keypad.
Convertible tower/rack format (2U).
Includes pedestal (pedestal mount) and lugs (rack mount).
Backup extensions available for all power ratings.
UPS models with extra charger for backup extensions.
RS-232/USB-HID interface.
Downloadable monitoring software for Windows, Linux and Mac.
Smart slot for SNMP/potential-free contacts/MODBUS.
ADSL/fax/modem protection.
EPO – emergency power off.
Programmable outputs for critical/non-critical loads.
Manual and automatic battery test.
Smart battery charger to shorten average recharging times.
Battery recharging with device turned off.
SLC Greenergy solution.
Display

Configuration values, fault codes and remaining backup.
Level of battery available.
Level of load connected.
Input values (current, voltage and frequency).
Output and battery values (current, voltage and frequency).
Operating mode.


Applications

The features of the SPS ADVANCE RT2 series make it a versatile solution for protecting a wide range of IT equipment such as basic servers, routers, switches, hubs and point-of-sale with high power density requirements and/or rack installation of servers/ communications.

Connections

Connection for battery module (only in models with extra charger).
ADSL/fax/modem transient protector.
Emergency stop (EPO).
USB interface.
Socket IEC C19 (only for 3000 VA model).
Resettable thermal cutoff (fuse for 800 and 1100 VA models).
Plug (IEC 14 for 800, 1100 and 1500 VA models; IEC 20 for 2000 and 3000 VA models).
Fan.
RS-232 interface.
Smart slot for SNMP/potential-free contacts/ MODBUS.
Sockets (8 x IEC 13), programmable critical (x4) / non-critical (x4).


Technical Specification

MODEL SPS 2000 ADVANCE RT2 UPS Power (VA / W) 2000 / 1800 Technology Line-interactive with sine-wave output Format Convertible tower/rack (2U) Outlets AC outlets 8 x power IEC 60320 C13 AC outlet type IEC 60320 C13 Input Rated Voltage 208 / 220 / 230 / 240 V Voltage range 170 - 280 V up to 100% load Stabiliser AVR (buck-boost) Frequency 50 / 60 Hz ±5% Input protection Resettable thermal cutoff Output Rated voltage 208 / 220 / 230 / 240 V Voltage accuracy (battery mode) ±1.5% Power factor 0.9 Waveform Pure sine wave Total harmonic distortion (THDv) ?2% linear load;
?5% non-linear load Admissible overload Online mode < 120% off at 5 min / < 150% off at 10 s Battery mode < 120% off at 1 min / < 150% off at 10 s Programmable sockets Yes, for critical / non-critical loads (4/4) Frequency 50/60 Hz (same as input)±0.1% Efficiency On-line mode >95% Stabiliser mode (AVR) >92% Battery mode >80% Battery Battery type Pb-Ca sealed, AGM, maintenance-free Protection Against power surges, undervoltages and alternating current components Battery test Automatic on every start + one times a week Charging Charge type I/U (constant current/constant voltage) Recharge time 4 hours to 90% Communication Interface RS-232/USB-HID Smart slot for SNMP / potential-free contacts / MODBUS Yes Downloadable monitoring software For Windows, Linux and Mac Other Functions Cold start (start-up from batteries) Yes Emergency power off (EPO) Yes ADSL/fax/modem transient protector Yes Green-function Yes, automatic stop in battery mode with load <5% Smart fan speed Yes, smart control of fan speed Site wiring fault Yes, error detection of phase-neutral rotation and/or absence of earth General Operating temperature 0ºC - 40ºC Relative humidity Up to 95%, non-condensing Noise level at 1 metre Less 45 dB Dimensions (D x W x H mm) 510 x 438 x 88 (2U)  Weight 21.50Kg Standards Safety EN 62040-1:2008 Electromagnetic compatibility (EMC) EN 62040-2:2006(C2) Operation EN 62040-3:2011 Quality & Environmental Management ISO-9001 and ISO-14001

Salicru's SPS 1200 SOHO+ IEC 1200VA UPS stands out for their Line-interactive technology, compatibility with APFC (active power factor correction) loads and their dual USB charger on the front.

Line-interactive systems use AVR (buck-boost) automatic voltage regulators to reduce possible fluctuations in input voltage, thereby lowering battery use, extending battery life and providing maximum backup if necessary.

Features

1200 VA of Power
6 x IEC Outlet Sockets
Line-interactive technology.
Dual USB charger on the front (max. 2 Amp).
Compatible with APFC (active power factor correction) loads.
Complete LCD display with all information.
Permanent stabilisation (AVR).
USB communication interface with HID protocol.
Monitoring software for Windows, Linux and Mac.
Resettable input thermal protection.
Cold start function for start-up without mains.
Automatic restart when power restored.
Automatic frequency detector 50 or 60 Hz.
Protection against overloads and short circuits.
SLC Greenergy solution.
Applications

Salicru's SPS SOHO+ series UPS systems are ideal for the protection of computer/office environments from single-user management, design or communications stations to small networks composed of one server, various workstations and all associated peripherals. At the same time, they allow the charging of mobile devices through the two built-in USB ports. They are therefore suitable for shops, self-employed professionals, small offices, franchises, dealers, etc.

They also feature a USB interface with HID protocol for control, parameter setting and computer shutdown/hibernation. Also available is a software package for the management and monitoring of associated environments, including virtualised systems.

Display

Battery level available (25-50-75-100% and end of backup).
Connected load level (25-50-75-100% and overload).
Input voltage.
Output voltage.
Normal operation.
AVR operation (stabilisation).
Battery operation (power cut CA).
Device fault.


Connections

AC input.
UPS sockets.
Sockets with surge protection.
USB port.
Thermal rearmable input.


Contents

UPS SPS 1200 SOHO+ IEC
UPS / PC USB communication cable.
Telephone / data / modem cable.
Start-up guide.
Warranty certificate.
Control Software

UPS monitoring and management software, allowing the orderly closing of files and programs in the event of prolonged power cuts. Valid for Windows, Unix, Linux and Mac.
The latest version of this software can be downloaded from the Salicru website.

Technical Specification

MODEL SPS 1200 SOHO+ IEC UPS Power (VA / W) 1200 / 720 Technology Line-interactive Format Compact Tower Ports AC outlets 4 x power IEC 60320 C13 (UPS) ¦ 2 x power IEC 60320 C13 (surge) AC outlet type IEC 60320 C13 Input Rated voltage 230 V Voltage Range 162 V - 290 V Nominal frequency 50 / 60 Hz Input protection Resettable thermal cutoff Stabilisation AVR Buck / Boost Output Voltage 230 V Voltage accuracy (Battery mode) ±10% Waveform (Battery mode) Pseudo sine wave Frequency 50/60 Hz (same as input) APFC compatibility loads Yes Batteries Type Pb-Ca sealed, AGM, maintenance-free Recharging time 2-4 hours to 90% capacity Protection Against deep discharge, against short circuit by means of fuse Communication Interface USB (HID protocol) Downloadable monitoring software For Windows, Linux and Mac Display LCD Yes, multifunction Displayed values Input and output voltage / Input and output frequency /
Battery voltage / % of load Levels Connected load / Overload / Battery / Low battery Operating modes Normal / Stabilisation (AVR) / Battery / Fault Functions Cold start (starting from batteries) Yes Automatic re-start Yes, after the end of back up time USB Charger Quantity 2 Ports Voltage 5 Vdc Maximum current 2.0 A General Operating temperature 0ºC - 40ºC Relative humidity Up to 90%, non-condensing Noise level at 1 metre < 40 dB Dimensions (D x W x H mm) 364 x 139 x 195 Weight 10.40Kg Standards Safety EN 62040-1-1; EN-60950-1 Electromagnetic compatibility (EMC) EN 62040-2 Operation EN 62040-3 Quality & Environmental Management ISO-9001 and ISO-14001