Fibre Networking is the process of transferring data using light through a cable rather than electrons. Fibre Optic Networking can transfer data at a lot higher speed than Copper and also travel further distances beyond the copper limitations of 100m experiencing a lot less signal loss and no need to worry about Electromagnetic interference.
So here at Comms Express we offer a large range of Fibre Networking equipment including Bulk, pre-terminated fibre optic cable, fibre optic patch leads, pigtails, fibre termination and fibre cleaning products. We also provide MTP Fibre Cable which offers a simple and scalable method of network deployment.
Please Note: These products are made-to-order and therefore non-returnable.
Reduce on-site installation time by buying a pre-terminated and tested assembly which is fully protected and suitable for pulling through cable ducts. Assembled using quality components and internal/external LSZH Tight Buffered cable this is the perfect solution for all backbone, campus or horizontal fibre optic cabling requirements. Supplied on a cable drum ready for installation.
Features & Benefits
Manufactured in the UK
Reduces on site installation time
Factory terminated and tested
No need to invest in expensive termination tools
Perfect for disaster recovery
Our Multimode LC - LC Fibre Patch Leads are manufactured using only the highest quality components, including an LSOH/LSZH outer sheath and come in a choice of 62.5/125 (OM1), 50/125 (OM2), Enhanced 50/125 (OM3) and 50/125 (OM4) grade cable.
Each cable has a short strain relief boot and is supplied with a test report detailing insertion loss. All of the assemblies come with an LSOH sheath and are individually bagged and labelled.
LC Fibre Optic Patch Lead Connector
Features:
Available in OM1, OM2, OM3 and OM4 Multimode in a variety of lengths
LC-LC Connectors
Low smoke zero halogen (LSZH) jacket
Test Certificate Included
100% Optically Tested
Duplex Connectors
Note: Due to a low demand, OM2 Leads are now at a higher price than OM3 leads.
OM3 leads are backwards compatible with OM2 leads and will fulfil the same requirements.
Length: | |
Fibre Size: |
.jpg)
If you install or maintain data cabling, SignalTEK CT allows you to generate PDF test reports that prove installed links run at Gigabit Ethernet transmission rates.
Now includes a Touchscreen
Advanced wiremapping with TDR fault location
Gigabit performance test to the IEEE802.3ab Ethernet standard
Automatic generation of PDF reports
Report upload to USB memory stick without a PC
For installers, this means having a cost-effective way to demonstrate that the copper cabling was installed correctly and is capable of supporting Ethernet applications. By proving real world performance, SignalTEK CT confirms a professional job - reducing the risk of call backs. SignalTEK CT also gives network owners the assurance that installed cabling will support bandwidth hungry services like VoIP, IP CCTV and video streaming following moves, adds and changes.
SignalTEK CT automatically generates test reports in PDF or CSV format. Use the free TREND AnyWARE app from TREND Networks to view / send data cable and network test reports to colleagues and clients anywhere.
The hassle of connecting to local Wi-Fi is eliminated to provide a superior user experience, because the TREND tester serves as Wi-Fi hotspot.
Advanced wiremapping with TDR fault location
Gigabit performance test to the IEEE802.3ab Ethernet standard
Automatic generation of PDF reports
Report upload to USB memory stick without a PC
The TREND AnyWARE app is supported by SignalTEK CT and SignalTEK NT.
For instructions on how to use the app please refer to your TREND Networks tester quick reference guide or manual.
Features:
Wireless connection to Apple and Android smartphones with the free TREND AnyWARE™ app. View your reports on your smart phone before sharing them using your preferred data sharing method including email or file sharing app.
Contents - 1 x SignalTEK CT display unit, 1 x SignalTEK CT remote unit, 2 x Power module (rechargeable), 2 x Power supply with EU/UK/US adaptors, 2 x Patch cables - 30cm, Cat 5e STP, 1 x USB Wi-Fi adapter, 1 x Quick reference guide (English), 1 x Carrying case.
Test Reporting - SignalTEK CT automatically generates test reports in PDF or CSV format. The summary page of each report can be customised to include logo, company and operator details. Choose between 3 different reports that can show either passed, failed or all test reports in each report:
Fast & Flexible - Fast Autotest provides proof of network performance in seconds. USB port enables rapid transfer of test results to memory stick. Support for shielded and unshielded twisted pair cable including Cat 5e, Cat 6, Cat 6A and Cat 7 (TIA 568A and 568B wiring schemes). Stores up to 5000 tests to accommodate even the largest jobs. Ability to identify and trace cables with a compatible amplifier probe (62-164)
Intuitive - Automatic generation of PDF format test reports makes documentation effortless. User-friendly menu structure for trouble-free operation and minimal training. Simple cable naming and job creation enhances on-site productivity
Dependable - Tests against IEEE802.3ab to assure cable performance against a recognised international standard. Field replaceable RJ45 contacts eliminate downtime from worn or damaged connectors. Rugged design provides protection against knocks in the fieldNo requirement for annual calibration reducing cost of ownership
Application - Testing of twisted pair data cables to demonstrate that the copper cabling was installed correctly and is capable of supporting Ethernet applications to the IEEE 802.3ab Gigabit Ethernet Standard
LC Multimode Loaded Fibre Patch Panels
Features
6 x LC Fibre Modules (12 or 24 port)
Rack Mountable Steel Box
24 Module Capacity
Ports: |
Our Multimode LC - SC Fibre Patch Leads are manufactured using only the highest quality components, including an LSOH/LSZH outer sheath and come in a choice of 62.5/125 (OM1), 50/125 (OM2), Enhanced 50/125 (OM3) and 50/125 (OM4) grade cable.
Each cable has a short strain relief boot and is supplied with a test report detailing insertion loss. All of the assemblies come with an LSOH sheath and are individually bagged and labelled.
LC Fibre Optic Patch Lead Connector
SC Fibre Optic Patch Lead Connector
Features:
Available in OM1, OM2, OM3 and OM4 Multimode in a variety of lengths
LC-SC Connectors
Low smoke zero halogen (LSZH) jacket
Test Certificate Included
100% Optically Tested
Duplex Connectors
Note: Due to a low demand, OM2 Leads are now at a higher price than OM3 leads.
OM3 leads are backwards compatible with OM2 leads and will fulfil the same requirements.
Length: | |
Fibre Size: |
Horizontal lacer bars provide cabling support in the region of the mounted equipment itself, carrying cables horizontally from the sides of the rack to the connection points.
Depth: |
Sold in metre lengths, Just select your length in quantity and add to cart.
Minimum Order Quantity 20 metres. Cable is cut to order and non-returnable.
Loose Tube optical fibre cables have been designed specifically for internal and external applications. These bend insensitive compact, lightweight cables are extremely flexible and are quick and easy to install. The cables are constructed around a gel filled (non-dripping and silicon free) tube containing up to 24 colour coded 250?m primary coated 50/125?m fibres. The outer jacket is Flame Retardant, Low Smoke Zero Halogen.
Corrugated steel tape (CST) Armoured loose tube optical fibre cables have been designed specifically for applications requiring a high degree of mechanical protection. These compact, lightweight cables are extremely rugged, provide rodent resistance and are quick and easy to install. The cables are constructed around a gel filled (non-dripping and silicon free) tube containing up to 24 colour coded 250?m primary coated 50/125?m fibres. This tube is covered with water swellable E-glass acting as strength members. This cable construction is completed with a longitudinally applied corrugated steel tape and a flame retardant, low smoke zero halogen, outer sheath.
OM4 multimode Tight buffered optical fibre cables have been designed specifically for internal and external applications. The OM4 multimode optical fibre cable will support 10 Gigabit Ethernet up to channels of 550m in length. These bend insensitive, compact, lightweight cables are extremely flexible and quick and easy to install. The cables are constructed with a swellable reinforced yarn strength member containing up to 24 colour coded 900?m tight buffered 50/125?m fibres, covered with a flame retardant, low smoke zero halogen, outer sheath.
Specifications available upon request.
Cores: | |
Coating: |
Please Note: These products are made-to-order and therefore non-returnable.
Manufactured in the UK
Rapid Deployment
A factory terminated optical fibre cabling solution is a simple, yet scalable, reliable method of network Deployment. Installation time compared to traditional fibre cabling systems can be reduced by up to 75%. Simply Pull, plug and complete installation on time, eliminating all unpredictable field termination variables.
High Performance and Reliability
A combination of high quality branded components and manufacturing quality control guarantees products are of the highest standard. State-of-the-art MTP® manufacturing facilities provide high performance assemblies for the most demanding applications.
Cost Saving
Installation time involving a costly highly qualified workforce can be reduced to a minimum. A customised tailor-made system means that there is no waste of Connectors or fibre cable.
Scalability
The ever increasing demand for higher bandwidth rates requires more complex networks. A modular system is the choice to ease future expansion and for quick and easy system reconfiguration.
High Density
Thousands of optical ports can be hosted in a SAN (Storage Area Network) or contemporary data centre.
These High Density Systems allow for scaling up to 144 fibres in a single assembly.
Next Generation Network Proof
The evolving future protocols of 40 and 100Gbps Ethernet utilise parallel optics. With MTP® connections in your network the infrastructure will be unchanged and easily fit into the new network standard topologies.
MTP Connectors Explained
These Lockable IP65 distribution box offers the ability to terminate fibres housed in a strong robust ABS enclosure for indoor and outdoor applications.
With the ability to use SC Simplex/Duplex and LC Quad adaptor types offering a flexible solution to the end user, enabling them to incorporate a multi functional enclosure which allows easy access during installation or re-work with no disturbance of the existing cable or fibres.
In addition to the interchangeable adaptors the enclosures offers from 2 to 24 exit points for patching cables and 1 standard cable entry point for loose tube, tight buffer, pre-terminated and steel tape armoured cable.
Each enclosure has integrated strength member tie positions and bend radius protection with the addition of a removable front door allowing for quick and easy installation.
Removable splice tray for easy installation
Multiple adapter options available
IP 65
Accepts loose tube, distribution and pre terminated cables
Integrated bend radius protection
Sealing glands
Lockable door
Removable door for ease of installation
RoHS, REACH SvHC
Supplied with splice protectors
Supplied with transit tubing
Supplied with wall fixings & tie wraps
200E658LCM Specifications
Dimensions
Height: 258mm
Depth: 61mm
Width: 186mm
Cable Entry
1 x 20mm
Cable Exit
2 x 20mm
Fibre Size: | |
Ports: |
