24 Port Smart Switches

30-port Lite Layer 3 Stackable Managed Gigabit Switch

The DGS-3130 Series is a range of Lite Layer 3 Stackable Managed Switches designed to connect end-users in a secure enterprise or metro Ethernet access network. With multicast support and enhanced security, they form the ideal Gigabit access layer solution.

Designed For Secure Enterprise And Metro Ethernet Networks

Feature-Rich Unified Image

with powerful L2 and L3 features

6 Embedded 10G Ports

for super versatile network deployment

Scalable and Highly Available

with physical stacking and fault tolerant topologies

Key Features

24 x 100M/1/2.5GBASE-T ports
2 x 100M/1/2.5/5/10GBASE-T ports and 4 x 10/25G SFP28 ports provide all the uplink capacity your network needs
Premium L2 and L3 features effortlessly improve network efficiency and reduce unnecessary data transfer
RIP/RIPngand OSFPv2/v3 dynamically map out your network, aiding data to get to its destination via the fastest route possible
Expand capacity in a flash with physical stacking up to 9 units
Smart Fan self-adjusts accordingly to maintain optimal operating temperatures
Support ERPS, Q-in-Q and 6 KV surge protection
Support 60W PoE compliancewith IEEE 802.3bt
Enhanced Network Reliability

The DGS-3130 Series targets enterprises and metro Ethernet applications, and customers who require a high level of network security and maximum uptime. Ethernet Ring Protection Switching (ERPS), low-latency ERPS recovery for high-speed metro Ethernet ring resilience, and Loopback Detection for network maintenance provide reliable network access for non-stop service.

Comprehensive Security

The DGS-3130 Series provides users with the latest security features such as Multi-layer and Packet Content Access Control Lists (ACL), Storm Control, and IP-MAC-Port Binding (IMPB) with DHCP Snooping. In addition, the DGS-3130 Series supports authentication mechanisms such as 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC) for strict access control and easy deployment.

Scalable Flexibility

The DGS-3130 Series allows multiple switches to be combined via two 10G RJ-45 and four 10G SFP+ ports to form a single physical or virtual stack to meet the needs of growing enterprises. This increases redundancy over multiple physical units and simplifies management by allowing all members in the stack to be managed using a single IP address.

Versatile Traffic Management

The DGS-3130 Series implements a rich set of multi-layer QoS/CoS features to ensure that critical network services such as VoIP, video conferences, IPTV, and IP surveillance are always given high priority. This optimizes network data, and video and voice transmissions to ensure that sensitive data is always transmitted quickly and reliably.

Automation and Analytics

The HPE Aruba Networking CX 6200 Switch Series delivers unparalleled visibility with built-in analytics for real-time monitoring and troubleshooting to help fix problems faster. The Aruba Network Analytics Engine (NAE) automatically interrogates and analyzes events that can impact network health. Advanced telemetry and automation provide the ability to easily identify and troubleshoot network, system, application, and security related issues easily through the use of Python agents and REST APIs. The Time Series Database (TSDB) stores configuration and operational state data, making it available to quickly resolve network issues.

Aruba NetEdit introduces automation that allows for rapid network-wide changes, and ensures policy conformance post network updates. Intelligent capabilities include search, edit, validation (including conformance checking), deployment, and audit features. The Aruba CX Mobile App simplifies connecting, stacking, and managing HPE Aruba Networking CX 6200 switches. Switch information can be imported into Aruba NetEdit for simplified configuration management and to continuously validate the conformance of configurations anywhere in the network.

Performance and Power

The HPE Aruba Networking CX 6200 Switch Series uses a fully distributed architecture with Aruba Gen7 ASICs that delivers very low latency, increased packet buffering, and adaptive power consumption. All switching and routing are wire-speed to meet the demands of bandwidth-intensive applications. Aruba Virtual Switching Framework (VSF) allows you to quickly grow your network using high performance front-plane stacking. Create 8 member stacks using built-in SFP+ ports with flexibility to create stacks that span longer distances using long-range transceivers.

Deploy wireless access points and IoT devices with HPE Aruba Networking CX 6200 models that support up to 1440W IEEE 802.3at Class 6 Power over Ethernet for up to 60W per port. Flexible, modular switch models support hot-swappable, redundant power supplies and fans for enhanced resiliency.

Smarter Segmentation

The HPE Aruba Networking CX 6200 Switch Series supports Aruba Dynamic Segmentation that automatically applies and enforces user, device, and application-aware policies on Aruba wired and wireless infrastructures.

Automated device profiling, role-based access control, and Layer 7 firewall features deliver enhanced visibility and performance for a better overall experience for both IT and end-users alike. Switch-to-switch tunnels with VXLAN for low-latency and high performance use cases.

Specifications

Latency1 Gbps: 2.28 ?Sec
Latency1 Gbps: 10 Gbps: 1.46 ?Sec
Throughput: Up to 95.2 Mpps
Routing/switching capacity: 128 Gbps
Memory and processor: Quad Core ARM Cortex™ A72 @ 1.8 GHz
Ports & interfaces

Ports: 24x ports 10/100/1000BASE-T Ports
4x 1G/10G SFP ports (2x LRM; 2x LRM/MACSec 256)
1x RJ-45 Console Port
1x USB-C Console Port
1x OOBM
1x USB Type-A Host port

Maximize efficiency and agility with simple Cloud Network GS1915 Series Cloud Switch Compact and Affordable Cloud-based Switch Series The GS1915 Series includes four 8/24-port switches, with or without PoE options. The two PoE models facilitate wide variety of network setups with flexible PoE budget of both 60 W (8EP) and 130 W (24EP) with all PoE ports supporting IEEE 802.3at PoE+. This Series Switches come with useful features and superior performance just with plug-n-play.

Nebula, The Intelligent Cloud Management The GS1915 Series supports free Nebula cloud management. Nebula provides both intuitive web interface and mobile App to deliver a streamlined experience for installation and management of your network, without additional cost for a software or hardware controller. Typical standalone mode is still available for your preference.

Watch the demo video below:

Watch Demo

Network on Your Palm Anytime, Anywhere with the Nebula Mobile App Easy device onboarding: QR code scan


At a glance of network status


Remote control your network


Reboot AP, Camera by PoE power cycle


Block clients with unusual traffic


The Nebula Ecosystem Nebula supports a comprehensive range of products from switch, AP, security firewall, to 5G/LTE mobile routers. Bringing you an easy and unified network experience.

GS1915 Series is The Best Choice If You Are… Prosumers Small Business Chain Stores Effortless deployment, unified home network experience
Quality connectivity for growing home IOT devices
Simple and unified network experience
Sturdy network performance for daily business operation
Simple to manage and maintain multiple stores
Flexible to expand networking solution for new store location instantly
Power Devices in Your Network Easily GS1915-8EP and GS1915-24EP support 60W and 130W power budget respectively, ideal for setup just a few more AP and Camera for homes and small businesses. With Nebula App, it’s easy to reset an abnormal camera by power cycling it, even when you’re away.

The Aruba CX 6300 Switch Series is a modern, flexible and intelligent family of stackable switches ideal for enterprise access, aggregation and core deployments. A powerful distributed architecture supports scalable, non-blocking performance to future-proof your network for tomorrow’s unpredictable demands. This series has built-in, high-speed uplinks and include models with 24 SFP+ ports and full-density 60W PoE with multi-gigabit Ethernet for a high-performance network. A cloud-centric design with a fully programmable OS delivers automation and simplicity, including easy-to-use configuration tools for error-free installs. Built-in monitoring and analytics across the network provide operators with immediate troubleshooting and problem resolution insights.

Stackable Layer 3 switches with BGP, EVPN, VXLAN, VRF, and OSPF with robust security and QoS. Now supporting MACsec 256, PTP, AVB and LRM.

High performance 880 to 1760 Gbps system switching capacity, 660 to 1310 MPPS of system throughput and up to 200 to 400 Gbps stacking bandwidth.

Series includes full density HPE Smart Rate (1/2.5/5GbE) multi-gigabit and up to 90W PoE, SFP+ model and switch bundle with power-to-port airflow for data center 1GbE ToR and OOBM deployments.

Built-in high speed 10/25/40/50/100GbE uplinks (50GbE for DAC connectivity only) with intelligent monitoring and visibility via the Network Analytics Engine.

Manage via single pane of glass with HPE Aruba Networking Central across wired, wireless, and WAN Dynamic Segmentation enables enhanced security and simple access for users and IoT.

Specifications

Switch type: Managed
Switch layer: L3
Packet buffer memory: 8 MB
(24) 10/100/1000 BASE-T ports
(4) SFP ports
Data transmission

Throughput: 334 Mpps
Latency (1 Gbps): 2.28 µs
Latency (10 Gbps): 1.46 µs
Switching capacity: 448 Gbit/s

Product overview

From connectivity to cloud applications, networking plays a crucial role in every business journey. Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources.

Cisco Business is a portfolio of affordable wireless access points, switches, and routers designed and built for Small Business. Managed through Cisco Business Dashboard and mobile app, the portfolio provides a simple and reliable experience. Cisco Business Dashboard simplifies traditional challenges in deploying and managing business networks by automating the deployment, monitoring, and lifecycle management of the network.

Cisco Business 220 Series Smart Switches

The Cisco Business 220 Series are affordable smart switches with ease of use, security, and reliability for business-class networks. With intuitive dashboard, Power over Ethernet (PoE) options, and customizable features, these switches deliver a solid business network within your budget parameters. When you need a business-class network and cost is top priority, Cisco Business 220 Series provides an excellent solution.

Prominent feature | Business Applications

With Cisco Business 220 Series switches, you can not only build an efficient and reliable network to connect the workforce, you can also create advanced solutions to deliver data, voice, and video services on a converged infrastructure. Get the best value for your money by improving the productivity of employees. Possible deployment scenarios include:

Small office networking: The versatility and affordability of the Cisco Business 220 Series family of switches provide an ideal business-class networking foundation for small businesses with limited IT support and budget.
Wireless connectivity: With PoE+ support, and comprehensive security and Quality of Service (QoS) capabilities, Cisco Business 220 Series switches provide a solid foundation to add business-grade wireless to the network. You can easily deploy Cisco Business wireless access points to increase workforce productivity without worrying about power and throughput.
Unified communications: The Cisco Business 220 Series switches provide QoS features to automatically prioritize delay-sensitive traffic to help you easily deploy an IP-based communication solution on a converged network. PoE+ support can enable IP cameras and videophones to be easily added to your current network. Cisco offers a complete portfolio of IP telephony and other unified communications products designed for small businesses. Cisco Business 220 Series switches have been rigorously tested to help ensure easy integration and full compatibility with these and other vendor products.
Features

Management capability allows maximum efficiency and with unrestricted control
Conveniently lets you connect two standard Ethernet ports to ensure maximum efficiency
Effectively increases available bandwidth on your network
Up to 10x faster than standard Ethernet server connectivity while providing high-performance uplinks
Layer 2 switch provides a complete lineup of features including IGMP snooping, port mirroring, and spanning tree
Supports optical fibre cable to span longer distances and provided high data transmission rates between servers and network components
Built-in power supply to ensure all components are being supplied with accurate voltage
Features 24 networking ports to establish large network
Specifications

Manageable: Yes
Layer Supported: 2
Expansion Slot Type: SFP (mini-GBIC)
Number of Total Expansion Slots: 4
Number of SFP Slots: 4
Network (RJ-45): Yes
Modular: Yes
Uplink Port: Yes
Total Number of Network Ports: 24
Port/Expansion Slot Details: 24 x Gigabit Ethernet Network, 4 x Gigabit Ethernet Expansion Slot
Network Technology: 10/100/1000Base-T, 1000Base-X
Ethernet Technology: Gigabit Ethernet
Media Type Supported: Optical Fiber, Twisted Pair

Overview
Nebula Cloud-managed Layer 3 Enterprise Switch The XGS2220 Series is a family of Layer 3 access Switches that consists of six models, including PoE, Non PoE and Fiber options. Non PoE models offer Gigabit desktop ports for everyday network access; PoE models allow flexible options with larger PoE budgets and a mix of 60 W and 30 W ports to power devices like the latest WiFi 6/6E Wireless Access Points; The Fiber model aims to achieve business connectivity for high fiber port density requirement.

Flexible 10G For Converged Networking Applications On top of four 10G SFP+ uplinks, the XGS2220 Series comes with two additional 10G Multi-Gig RJ 45 ports to offer the flexibility to connect to servers, network storage, or other high speed network devices. Business can operate smoothly with the better extensibility and robust network infrastructure.

Multiple Power Budget options PoE models come with 10 ports of PoE++ (IEEE 802.3bt) offering up to 60 W per port and 16-40 ports of PoE+ (IEEE 802.3at) delivering up to 30 W per port to meet a variety of applications, including the latest generation of Wireless Access Points.

Within the range, the 3 PoE models of 30HP, 54HP and 54FP can offer larger Power budgets of 400 W, 600 W and 960 W respectively, allowing flexibility in powering a full range of PoE devices efficiently for applications like VoIP, surveillance, high density networked AV applications and Zyxel’s compressive WiFi 6/6E AP portfolio.

Nebula, Manage It Your Way! The support of NebulaFlex Pro allows you to easily switch management modes between standalone management and intuitive Nebula cloud managed mode with 1 YEAR Pro Pack bundled. Nebula provides both intuitive web interface and mobile App to deliver a streamlined experience for installation and management of your network, without additional cost for a software or hardware controller.

Anytime, Anywhere with Nebula Mobile App -Easy device onboarding: QR code scan

-At a glance of network status

-Remote control your network

-Reboot AP, Camera by PoE power cycle

-Block clients with unusual traffic

Dedicated Networked AV Mode The XGS2220 series includes a tailor-made networked AV mode when used in standalone mode. You can switch interfaces to simplify the installation of AVoIP with an intuitive wizard that prompts high level requirements for this type of network infrastructure; leveraging from AI intelligence, the switch is then able to remove the complexity by applying all the necessary details to set up a professional AVoIP deployment in minutes.

When deployed in Networked AV mode the switch gives you a dedicated dashboard allowing quick access to the key AV network elements such as IGMP and IP information as well as fast access to configuration functions often associated with AVoIP deployments.

Simplify Network Deployment and Management for Small Organizations

The Aruba Instant On 1930 switch series features easy-to-use, out-of-the-box, plug-and-play deployment. The series offers a complete portfolio of choices for increased small business flexibility. It consists of seven models including 8G-, 24G-, and 48G-ports with and without class 4 PoE (i.e. PoE+).

The 24- and 48- port models include four SFP/SFP+ transceiver slots that support Gigabit or 10-Gigabit speeds for fiber connectivity. The Aruba Instant On 1930 switch series can be deployed using two management modes – Instant On cloud-management (access via mobile app and/or web portal) and the local web GUI.

Main Features

Seven advanced smart managed Layer 2+ Gigabit switches for high-performance connectivity.
Non-PoE and Class 4 PoE (i.e. PoE+) 8-, 24- and 48-port models for deployment flexibility.
1G/10G SFP+ ports on 24-and 48-port models for fiber connectivity.
Aruba Instant On mobile app and/or cloud-based web portal for easy network management onsite or remotely.
Option to manage your switches through local web GUI.
Limited Lifetime Warranty.


Keep Your Business Protected with Integrated Security Features

The Aruba Instant On 1930 switch series supports energy efficient Ethernet for lower power consumption and an enhanced feature set for more robust operation. Enhanced security features such as IEEE 802.1x, and VLANs guard your network from unwanted or unauthorized access.

Automatic denial-of-service (DOS) monitors and protects the network against malicious attacks. Management security restricts access to critical configuration commands, offers multiple privilege levels with password protection.

Deliver High Perfomance

The Aruba Instant On 1930 switch series delivers advanced functionalities including customizable like VLANs, link aggregation, Spanning Tree Protocols, and IEEE 802.1X access control.

8-, 24-, and 48-port configurations with a choice of non-PoE and Class 4 PoE models provides deployment flexibility that fits all small business environment. Class4 PoE options allow to power devices like IP phones, surveillance cameras and access points, without the cost of additional cabling.

The 24- and 48-port models include 1G/10G SFP+ ports for reliable fiber connectivity and other connections across longer distances. The switch series is covered by the Limited Lifetime Warranty with 24x7 phone support for 90 days and chat support for the entire warranty duration.

The D-Link DGS-1250-28XMP 24-Port Gigabit Smart Managed PoE+ Switch with 4 x 10G Uplinks is the latest generation of switches to provide increased Power over Ethernet (PoE) output, high port density, multiple management interfaces, and advanced Layer 2 features. With all of these features combined, the DGS-1250-28XMP provides a cost-efficient and flexible solution for expanding any business network. 10G High-Bandwidth Connectivity

All models in the DGS-1250 Series feature four 10G SFP+ ports, allowing you to choose the most suitable media type for your requirement, to mitigate network bottlenecks. 24 1000BASE-T ports
4 10G SFP+ uplink ports
Up to 370W PoE power budget
Layer 2 and Layer 3 Lite features
Industry standard full CLI1, web GUI, console port
Dual software images & Dual configuration files
D-Link Limited Lifetime Warranty
Layer 2 Features

Such as port mirroring, Spanning Tree Procol (STP), RSTP, MSTP, Link Aggregation. QoS & Surveillance Mode

Capabilities like 802.11p Quality of Service, Bandwidth Control, Auto-Voice VLAN, and Surveillance Mode. Layer 3 Lite Features

Including IP interfaces, IPv6 Neighbor Discovery (ND), and IPv4/IPv6 Static Routing. Security controls

Including ARP Spoofing Prevention, port security - up to 64 MAC addresses per port, IMP-Binding, and D-Link Safeguard Engine. Management interfaces

Dedicated RJ-45 console port. Full CLI1, multilingual web GUI, SNMP MIB for remote NMS (D-View 7). Dual configuration files and dual software images Limited Lifetime Warranty & Next Day Service

Register to enjoy D-Link Limited Lifetime Warranty support, with complimentary next business day advance replacement service included. 10-Gigabit Ethernet port

Four 10G SFP+ uplink ports. Backwards compatibility with RJ-45 ports. High PoE budget

Up to 370W Power over Ethernet (PoE) power budget to power more devices. Leading the way with affordable 10 Gigabit connectivity. Deploy the most cost-effective 10G solution as core switches for SMBs and as access switches for Enterprises. Designed with a high port density, high-bandwidth ports to remove bottlenecks, a high PoE power budget for larger deployments, redundancy capabilities to maintain uptime, easy-to-use multilingual web UI management, dedicated console port and full CLI control.

DGS-1250-28XMP
24 x 10/100/1000BASE-T PoE
4 x 10G SFP+ ports
128 GBps switching capacity

 

Easier maintenance, less downtime. Support for STP, RSTP, and MSTP provides redundant links, prevents network loops, increases network reliability and minimises downtime for essential applications. These switches can even withstand temperatures between -5 to 50°C. Dual software images and configuration files allow the switch to quickly change between firmware versions and configurations to minimise downtime 10G connections Each switch in the series has four 10G SFP+ ports, which allows the most suitable media type to be chosen and mitigates network bottlenecks. The flexible uplink connections in both 1G/10G speeds deliver on data-intensive tasks.  

Optimised for Video Surveillance D-Link’s exclusive Surveillance Mode provides a Web UI designed for video surveillance: it gives you an instant snapshot of your topology, makes features easy to access, and simplifies management of your surveillance network. Layer 3 Lite Including IP interfaces, IPv6 Neighbor Discovery (ND), ARP-Snooping Prevention, IGMP and MLD Snooping, LLDP and LLDP-MED. The DGS-1250 series also includes IPv4/IPv6 static routing capabilities for a scalable and more efficient network. QoS The series supports 802.11p Quality of Service to deliver data to devices based on the priority and type of traffic, and bandwidth Control to reduce unwanted network broadcast traffic. And the Auto-Voice and Auto-Surveillance VLAN features allow voice and video traffic to be automatically identified and prioritised.  

Security down to the port level. The D-Link Safeguard Engine helps protect against malicious traffic flooding the network in the event of a malicious attack. The series supports IMP-Binding which is an easy method to control nodes during IP conflicts and auditing issues, and it prevents ‘ARP spoofing’ and 'man-in-the-middle' malicious attacks.

Network security is further reinforced with ARP Inspection, DHCP Snooping, and a host of security and authentication features such as 802.1X port-based authentication, port security for 64 MAC addresses per port. The series also includes network protection functionalities like Access Control List, and DHCP Server Screening that only allows legitimate DHCP Server IP addresses on specific ports.

 

Fewer wires, more PoE power. All DGS-1250 series PoE switches support IEEE 802.3af/at with a high PoE power budget of 370W. This means more power to remote devices through single Ethernet cables without needing nearby power outlets, and results in faster and easier PoE deployments of VoiP phones, wireless APs or network cameras..  

Network management options to suit your business. The DGS-1250 series comes with the intuitive D-Link Network Assistant (DNA) utility for which simplifies the discovery of all devices using the D-Link Discovery Protocol within the same L2 network segment and displays them on screen for instant access. Simultaneous configurations and basic setups of all discovered devices, including password changes and firmware upgrades, can then be done easily.

The series can also be managed through the web-GUI that has 11 selectable languages, or the free, SNMP-supported D-View 7. Each switch includes a dedicated console port, and the full CLI1 provides more control, precision and repeatability.



1 Full CLI support available at end 2019 via firmware update.

The NETGEAR PoE+ Gigabit Smart switches with Remote/Cloud Management provides a great value, with configurable L2 network features like VLANs and PoE operation scheduling, allowing SMB customers to deploy PoEbased VoIP phones, IP cameras, videoover-IP endpoints and Wireless access points simply and securely. Advanced features such as IPv4/IPv6 Layer 3 static routing, LACP link aggregation, DiffServ QoS, Private VLANs, Multicast VLAN Registration and Spanning Tree will satisfy even the most advanced small business networks.

Key features include:
- Quiet rack mounting operation with 26.80 to 39.30dBA at 25°C (77°F) ambient
- Layer 3 static routing with 32 routes (IPv4 and IPv6) for interVLAN local routing
- Advanced VLAN and Private VLAN support for better network segmentation
- L2/L3/L4 access control lists (ACLs) for granular network access control including 802.1x port authentication
- Advanced per port PoE controls for remote power management of PoE connected devices including operation scheduling (e.g. Wireless APs, IP security cameras, LED lighting, secure access door locks, IoT devices…)
- Advanced QoS (Quality of Service) for traffic prioritization including port-based, 802.1p and L2/L3/L4 DSCP-based
- Auto “denial-of-service” (DoS) prevention
- IGMP Snooping and Querier for multicast optimization
- Multicast VLAN Registration (MVR) for larger L2 multicast networks and AV over IP deployment
- Dynamic ARP for increased security targeting a class of Man in the Middle attack
- Rate limiting and priority queuing for better bandwidth allocation
- Port mirroring for network monitoring
- Energy Efficient Ethernet (IEEE 802.3az) for maximum power savings
- Cable test to troubleshoot connection issues
- SNMP v1, v2c, v3 and RMON remote monitoring

Build a future-proof network with NETGEAR:
- Solid performance with non-blocking architecture, 16K MAC addresses, 256 VLANs, 100 shared (ingress) ACLs and 512 Multicast groups
- Comprehensive IPv6 supporting management, QoS, ACL and routing, ensuring investment protection and a smooth migration to IPv6-based network
- PoE+ support on all models and on all ports
- 4 Dedicated SFPs, not only providing fiber uplinks, but also uplink redundancy and failover, improving reliability and availability for the network

Fully-integrated cloud-manageable devices
- Remote/Cloud Management capability with NETGEAR Insight. Instantly activate NETGEAR Insight Cloud management from the web GUI, for simpler configuration and deployment from anywhere using the NETGEAR Insight app on mobile devices or the Insight Cloud portal through a web browser

Smart IT, not Big IT
- Easy-to-use Web browser-based management GUI
- Network Management System (NMS300), allowing all NETGEAR business products to be deployed and managed through this single interface
- Dual firmware images improve reliability and uptime to your network
- Text-based Lite Command-line Interface (CLI)

NETGEAR quality and reliability
- Worry-free NETGEAR Limited Lifetime Warranty*, online technical chat support and Next Business Day (NBD) replacement
- 90-days Free 24x7 Advanced Technical Phone Support**

Lite Layer 3 stackable managed switch for a secure enterprise or metro Ethernet access network.

Adaptable, Bottleneck-Free 10G Business Connectivity

The DGS-3130 Series is a highly versatile Lite Layer 3 stackable switch. Including powerful L2 & L3 features, as well as support for multiple software images, it is highly pliant, capable of accommodating different network deployments.

With network bottlenecks on the rise, the DGS-3130 Series's six 10 Gigabit uplink ports are an ideal solution. Business can flexibly increase their bandwidth with flexibility to incrementally meet growing bandwidth demands.

Highly Reliable

Redundant power supply (RPS) support, Ethernet Ring Protection (ERPS) and 6 kV surge protection on all GE and RJ-45 access ports

Feature-Rich Unified Software

Powerful L2 and L3 features such as Static Route, RIP/RIPng and OSPFv2/v3

Scalable and Highly Available

Supports high bandwidth stacking and fault tolerant topologies

Easy Access Control

Support for 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC)

24 x 10/100/1000BASE-T ports
2 x 10GBASE-T and 4 x 10G SFP+ ports provide all the uplink capacity your network needs
Premium L2 and L3 features effortlessly improve network efficiency and reduce unnecessary data transfer
High redundancy features to provide professional-grade reliability and a longer product life:
Dual power inputs
Ethernet Ring Protection Switching with <50ms recovery time
6 kV surge protection protects the device and those connected from unexpected surges
802.1d/w/s Spanning Tree Protocol avoids potentially network crippling loops
RIP/RIPng and OSFPv2/v3 dynamically map out your network, aiding data to get to its destination via the fastest route possible.
Expand capacity in a flash with physical stacking up to 9 units
80 Gbps per device physical stacking bandwidth
The Smart fan self-adjusts accordingly to maintain optimal operating temperatures
Weather the Storm

The DGS-3130 Series features built-in 6 kV surge protection on all PoE and non-PoE Gigabit Ethernet access ports without needing external surge protection. This effectively protects the switches against sudden electrical surges caused events such as lightning strikes or unstable electrical current. This significantly reduces the chances of equipment being damaged, effectively lowering maintenance costs by minimizing the need for expensive repairs or replacement.

Highly Available. Highly Flexible.

The D-Link DGS-3130 Lite Layer 3 Stackable Managed Switches are a Gigabit access layer solution specifically designed to connect end-users in a secure enterprise or metro Ethernet access network.

The switches support high bandwidth, long distance stacking, with physical stacking of up to 9 units over fiber, increasing available Gigabit ports on demand. This makes them ideal for network administrators who demand agile expansion functionality without having to sacrifice network reliability.

Slash Your Network Downtime

The DGS-3130 Series gives enterprises and organizations a highly reliable network, allowing for maximum business continuity. It has built-in G.8032 Ethernet Ring Protection Switching (ERPS) to help minimize recovery times to 50 ms.

Along with a host of essential network reliability features, all switches in the series support an external redundant power supply to ensure your operations continue unimpeded.

Comprehensive Security

The DGS-3130 Series gives your network the protection it deserves with leading-edge security features that handle threats effectively. With built-in IP-MAC-Port Binding, the switches allow administrators to enhance user access control.

Other advanced features like DHCP Snooping let the switches automatically learn and save IP/MAC pairs to the IMPB white list.

Powerful and Unified

Powerful L2 and L3 features such as RIP/RIPng and OSPFv2/v3 come together in an integrated software image. This allows the switches to satisfy a wide range of requirements for different applications – perfect for building the solid and networks.

Manage Network Traffic in a Whole New Way

The DGS-3130 Series implements a rich set of multi-layer QoS/CoS features to prioritize critical network services such as VoIP, video conferences, IPTV, and IP surveillance. With robust features including Traffic Shaping, L2 Multicast, Host-based IGMP/MLD Snooping and ISM VLAN, administrators get a whole new way to manage their traffic that fits their needs.

Flexible Access Control Policies

Strict access control and deployment are made easy with the DGS-3130 switches. All support authentication mechanisms such as 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC), and allow individual policies to be assigned to each host after authentication. In addition, the switch also supports Microsoft® NAP (Network Access Protection).

What This Product Does

The TL-SG1024DE 24-Port Gigabit Easy Smart switch is an ideal upgrade from an unmanaged switch, designed for Small and Medium Business networks that require simple network management. Network administrators can effectively monitor traffic via Port Mirroring, Loop Prevention and Cable Diagnostics features. To optimise traffic on your business network, TL-SG1024DE offers Port-based/802.1p/DSCP QoS1 to keep latency-sensitive traffic moving smoothly and jitter-free. Additionally, port-based, tag-based and MTU VLAN can improve security and meet more network segmentation requirements. Moreover, with its innovative energy-efficient technology, the TL-SG1024DE can save up to 18% of power consumption, making it an eco-friendly solution for your business network.

Features:

Green Ethernet technology saves the power up to 18%
24 10/100/1000Mbps Auto-Negotiation RJ45 ports supporting Auto-MDI/MDIX
IEEE 802.3x flow control provides reliable data transfer
Steel housing, desktop or wall-mounting design
Support 802.1p/DSCP QoS and IGMP Snooping function
Fanless design ensures quiet operation
Simple network set-up on top of plug-and-play connectivity
Simple configuration by web-based user interface1 and management utility
Effective Management

TP-LINK’s Gigabit Easy Smart switch, TL-SG1024DE offers network monitoring for users to observe traffic behaviour. With Port Mirroring, Loop Prevention and Cable Diagnostics features, TL-SG1024DE can identify and even locate connection problems on your business network. Moreover, administrators can designate the priority of the traffic based on Port Priority and Port/ 802.1p/ DSCP Priority Priority, to ensure that voice and video are always clear, smooth and lag-free. Additionally, to improve security and network performance, TL-SG1024DE supports MTU VLAN, port-based VLAN and 802.1Q-based VLAN functions. TL-SG1024DE is an upgrade from the plug-and-play Unmanaged Switch, delivering great value while empowering your network and similarly delivering great value to the end user.

Easy to Use

TL-SG1024DE is easy to use and manage. Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) and intelligently adjusts for compatibility and optimal performance. Its compact size makes it ideal for desktops with limited space while also being Rack-mountable, convenient and safe. Dynamic LED lights provide real-time work status display and basic fault diagnosis.

TP-LINK Green Technology

You now have the choice to go green when upgrading to a gigabit network! This new generation of TL-SG1024DE 24-Port Gigabit Easy Smart Switch features the latest energy-efficient technologies that can greatly expand your network’s capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network.
Power down Idle Ports
When a computer or network equipment is off, the corresponding port of a traditional switch will continue to consume considerable amounts of power. The TL-SG1024DE can automatically detect the link status of each port and reduce the power consumption of ports that are idle.
Power Budget According to Cable Length
Ideally, shorter cables would use less power with less power degradation over their length; this is not the case with most devices as they will use the same amount of power across the cable regardless of whether it is 10 or 50 metres in length. The TL-SG1024DE analyses the length of the Ethernet cable connected and adjusts the power usage accordingly, rather than keeping the power consumption in a conventional solution.

Features

The HPE Aruba Networking 2930M layer 3 switch series that is easy to deploy and manage with HPE Aruba Networking ClearPass Policy Manager and on-premise with HPE Aruba Networking Airwave.

Simplify with Zero Touch Provisioning and cloud-based HPE Aruba Networking Central support.

Scale with modular 10 chassis stacking and up to 1440W PoE.

Modular 10GbE and 40GbE uplinks and HPE Smart Rate multi-gigabit support.

Models with 24 ports of HPE Smart Rate with IEEE 802.3bz.

High Power PoE models deliver up to 60W of PoE per port.

High-Performance Layer 3 Access Switches

The HPE Aruba Networking 2930M Switch Series provides performance, security, and ease of use for enterprise edge, SMB, and branch office networks.

Optimized for the digital workplace with unified management tools such as HPE Aruba Networking ClearPass Policy Manager, Airwave and Central. Provides optimal configuration automatically when connected to HPE Aruba Networking APs for PoE priority, VLAN configuration, and rogue AP containment.

Pay as you grow modular stacking (10 chassis) and modular 10GbE (SFP+) and 40GbE (QSFP+) uplinks. HPE Smart Rate multi-gigabit Ethernet models support high speed APs over existing cabling and upgradeable power supplies allow your network to quickly scale when more PoE is needed.

Robust Layer 3 feature set includes Access OSPF, static and RIP routing, ACLs, Dynamic Segmentation, sFlow, IPv6 with no software licensing required.

Designed with a power ProVision ASIC, the HPE Aruba Networking 2930M supports multiple programmatic interfaces, including REST APIs and Openflow 1.0 and 1.3, to enable automation of network operations, monitoring, and troubleshooting.

Performance and Power at the Edge

The HPE Aruba Networking 2930M Switch Series is designed with a powerful HPE Aruba Networking ProVision ASIC, to enable the mobile campus with low latency, increased packet buffering, and adaptive power consumption.

Increase performance with selectable queue configurations and associated memory buffering that meets your specific network application requirements.

Plug and play with up to 10 chassis stacking allowing automated failover enhances network resiliency and RPS support delivers power redundancy.

Supports hot swappable and redundant PoE power for wireless access points, cameras and phones and can easily scale to 1440W with choice of power supplies. High power PoE models deliver up to 60W of PoE per port.

Security and Quality of Service You Can Rely On

The HPE Aruba Networking 2930M Switch Series includes security and quality of services (QoS) features to build a network that meets ever-changing corporate policies and compliances while protecting your data from both inside and outside attacks.

Flexible authentication options include standards based security protocols such as 802.1X, MAC and Web Authentication, to enhance security and policy-driven application authentication.

Powerful multilevel-access security controls include source-port filtering, RADIUS/TACACS+, SSL, port security, and MAC address lockout.

Dynamic Segmentation provides user and port-based traffic tunneling to an HPE Aruba Networking Mobility Controller or Branch Gateway so that policies can be applied, advanced services can be extended to users and IoT devices, and traffic can be encrypted to protect the network.

Simplify with Integrated Wired/Wireless Management

The HPE Aruba Networking 2930M Series supports HPE Aruba Networking ClearPass Policy Manager for unified and consistent policy between wired and wireless users and simplifies implementation and management of guest login, user onboarding, network access, security, QoS, and other network policies.

HPE Aruba Networking Airwave Network Management software provides an on-premise network management platform for wired and wireless network devices. Cloud-based management with Zero Touch Provisioning supported by HPE Aruba Networking Central.

Supports both cloud-based HPE Aruba Networking Central and on-premise HPE Aruba Networking AirWave with the same hardware ensuring change of management platform without ripping and replacing switching infrastructure.

RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events.

Out-of-band Ethernet management port keeps management traffic segmented from your network data traffic.

Specifications

Dual Core ARM Coretex A9 @ 1016 MHz
1 GB DDR3 SDRAM
Packet buffer size: 12.38 MB and 4.5MB Ingress, 7.785 Egress
4 GB eMMC
Ports & interfaces

(24) RJ-45 autosensing 1/2.5/5GBASE-T PoE Class 6 ports
(1) Uplink module slot, (1) stacking module slot
Data transmission

Latency: 1000 Mb Latency: < 3.1 µs
Latency: 10 Gbps Latency: < 3.4 µs
Throughput: Up to 112 Mpps
Switching capacity: 320 Gbps
Differentiator

Powerful and flexible high density 1U PoE access switch packed with 24 HPE Smart Rate PoE ports supporting high power IEEE 802.3bt Class 6 (up to 60W) per port. Ideal for advanced Wi-Fi deployments. This model has 24x 802.3bz 1/2.5/5GBase-T copper PoE Class 6 ports. This model supports up to 1440W of PoE budget based on selected power supplies (max 2), with power supplies ordered separately.

The Ubiquiti UniFi Switch Enterprise USW-Enterprise-24-PoE is a managed Layer 3 switch featuring twelve 2.5G RJ45 ports with PoE+ for WiFi 6 APs, twelve Gigabit RJ45 ports with PoE+, and two 10G SFP+ ports for fiber uplinks.

DescriptionThe USW-Enterprise-24-PoE is a configurable Gigabit Layer 3 switch with auto-sensing 802.3at PoE+. It includes (12) 2.5G RJ45 Ethernet ports, (12) 1G RJ45 Ethernet ports, and (2) 10G SFP+ ports, providing 2.5G PoE links to your WiFi 6 APs and 10G fiber uplinks to your network.

Key features include a 1.3" touchscreen, a single-row RJ45 port layout for easy patch panel cable management, and support for the UniFi SmartPower Redundant Power System (USP-RPS) for intelligent protection against internal PSU interruptions or failures.

Please note: Ubiquiti supplies this product with EU power cables. Each product is opened at the point of distribution to include a UK power cable, breaking the manufacturer's seal. Despite this, the product is sold as NEW and UNUSED.

Key Highlights12 x 2.5G 802.3af/at PoE+ RJ45 Ports: High-speed connections for WiFi 6 APs
12 x 1G 802.3af/at PoE+ RJ45 Ports: Additional Gigabit connections
Two 10G SFP+ Ports: For high-speed fiber uplinks
400W Total PoE Capacity: Ample power for connected devices
1.3" Touchscreen: Easy AR switch management
UniFi SmartPower RPS DC Input: Enhanced power redundancy
Managed with UniFi Network Application: Compatible with web and mobile versions (Version 5.14.12 or higher)


Ubiquiti Extended Warranty

Ubiquiti currently offers 1 year standard manufacturer warranty on equipment purchased through official UK distributors.

In the unlikely event that you have any issues with your Ubiquiti product within the 1 year of manufacturer warranty, please contact your account manager in the first instance. Our technical team will do everything they can to find a resolution to your problem. If a fix cannot be provided, then an RMA will need to be registered via the Ubiquiti Reseller Portal.

On all purchases made through Comms Express, we offer our customers options to upgrade the standard manufacturer warranty to a 3 or 5 year advanced hardware replacement.

Available warranty options:







 

Features

Stackable Layer 3 switches with BGP, EVPN, VXLAN, VRF, and OSPF with robust security and QoS. Now supporting MACsec 256, PTP, AVB and LRM.

High performance 880 to 1760 Gbps system switching capacity, 660 to 1310 MPPS of system throughput and up to 200 to 400 Gbps stacking bandwidth.

Series includes full density HPE Smart Rate (1/2.5/5GbE) multi-gigabit and up to 90W PoE, SFP+ model and switch bundle with power-to-port airflow for data center 1GbE ToR and OOBM deployments.

Built-in high speed 10/25/40/50/100GbE uplinks (50GbE for DAC connectivity only) with intelligent monitoring and visibility via the Network Analytics Engine.

Manage via single pane of glass with HPE Aruba Networking Central across wired, wireless, and WAN Dynamic Segmentation enables enhanced security and simple access for users and IoT.

Automation and Analytics

The HPE Aruba Networking CX 6300 Switch Series delivers unparalleled visibility with built-in analytics for real-time monitoring and troubleshooting to help fix problems faster. The HPE Analytics Engine (NAE) automatically interrogates and analyzes events that can impact network health. Advanced telemetry and automation provide the ability to easily identify and troubleshoot network, system, application and security related issues easily, through the use of Python agents and REST APIs.

The Time Series Database (TSDB) stores configuration and operational state data, making it available to quickly resolve network issues. HPE Aruba Networking NetEdit support provides automation that allows for rapid network-wide changes, and helps ensure policy conformance post network updates.

Performance and Power

The HPE Aruba Networking CX 6300 Switch Series uses a fully distributed architecture with HPE Aruba Gen7 ASICs that deliver very low latency, increased packet buffering, and adaptive power consumption. All switching and routing are wire-speed to meet the demands of bandwidth-intensive applications. HPE Aruba Networking Virtual Switching Framework (VSF) allows you to quickly grow your network using high performance front plane stacking. Four built-in QSFP28 ports support speeds of 1/10/25/50GbE (50GbE for DAC connectivity only) for a total of up to 200 Gbps of stacking throughput per switch.

The S0E91A switch model also supports QSFP28 uplink speeds of 40 GbE and 100 GbE for up to 400 Gbps of stacking throughput. Deploy wireless access points and IoT devices with HPE Aruba Networking CX 6300 models that offer high density HPE Smart Rate multi-gigabit Ethernet with 90W PoE on every port for a total of 2880W of PoE. HPE Aruba Networking CX 6300L stackable, high-performance Layer 2-only switches available for customers needing scalability, high-capacity, and cost-effective connectivity in the access layer

Smarter Segmentation

The HPE Aruba Networking CX 6300 Switch Series supports Aruba Dynamic Segmentation that automatically applies and enforces user, device, and application-aware policies on Aruba wired and wireless infrastructures.

Automated device profiling, role-based access control, and Layer 7 firewall features deliver enhanced visibility and performance for a better overall experience for both IT and end-users alike. Switch-to-switch tunnels enable scalable multi-tenancy support with VXLAN to VRF mapping, while allowing policy application via user roles.

Specifications

Switch type: Managed
Packet buffer memory: 8 MB
Processor frequency: 1.8 MHz
Processor model: ARM Cortex-A72
Ports & interfaces

SFP module slots quantity: 4
Basic switching RJ-45 Ethernet ports quantity: 24
Basic switching RJ-45 Ethernet ports type: 10G Ethernet (100/1000/10000)
Data transmission

Throughput: 660 Mpps
Latency (1 Gbps): 4.24 µs
Latency (10 Gbps): 1.5 µs
Switching capacity: 880 Gbit/s

Cisco 350 CBS350-24FP-4X 24 Ports Manageable Ethernet Switch - 3 Layer Supported - Modular - 47.01 W Power Consumption - 370 W PoE Budget - Optical Fiber, Twisted Pair - PoE Ports - Rack-mountable. The Cisco Business 350 Series Switches, part of the Cisco Business line of network solutions, is a portfolio of affordable managed switches that provides a critical building block for any small office network.

Intuitive dashboard simplifies network setup, and advanced features accelerate digital transformation, while pervasive security protects business critical transactions. The Cisco Business 350 Series Switches provide the ideal combination of affordability and capabilities for small office and helps you create a more efficient, betterconnected workforce.

The Cisco Business 350 Series Switches is a family of fixed-configuration managed Ethernet switches. Models are available with 8 to 48 ports of Gigabit Ethernet connectivity and Gigabit or 10-Gigabit uplinks, providing optimal flexibility to create exactly the right building block for small office networks.

However, unlike other small business switching solutions that provide managed network capabilities only in the costliest models, all Cisco Business 350 Series Switches support the advanced security management capabilities and network features you need to support enterprise-class data, voice, security, and wireless technologies. At the same time, these switches are simple to deploy and configure, allowing you to take advantage of the managed network services your business needs.

Business applications

Whether you need a basic high-performance network to connect employee computers or a solution to deliver data, voice, and video services, the Cisco 350 Business Series Switches offer a solution to meet your needs. Possible deployment scenarios include:

Small office networking: The versatility and affordability of the Cisco Business 220 Series family of switches provide an ideal business-class networking foundation for small businesses with limited IT support and budget.
Secure office connectivity: Cisco Business 350 Series Switches can simply and securely connect employees working in small offices with each other and with all of the servers, printers, and other networking devices they use. High performance and reliable connectivity help speed file transfers and data processing, improve network uptime, and keep your employees connected and productive.
Unified communications: As a managed network solution, the Cisco Business 350 Series Switches provide the performance and advanced traffic-handling intelligence you need to deliver all communications and data over a single network. Cisco offers a complete portfolio of IP telephony and other unified communications products designed for businesses. Cisco Business 350 Series Switches have been rigorously tested to help ensure easy integration and full compatibility with these and other products, providing a complete business solution.
Highly secure guest connectivity: Cisco Business 350 Series Switches let you extend highly secure network connectivity to guests in a variety of settings, such as a hotel, an office waiting room, or any other area open to nonemployee users. Using powerful but easy-to-configure security and traffic segmentation capabilities, you can isolate your vital business traffic from guest services and keep guests' network sessions private from each other.
Features

Management capability allows maximum efficiency and with unrestricted control
Conveniently lets you connect two standard Ethernet ports to ensure maximum efficiency
Gigabit Ethernet port for ultra-fast network speeds
Rack mounting enables you to organize wires & secure cables for professional installation
Supports layer 3 switching for enhanced performance and usability
Supports optical fibre cable to span longer distances and provided high data transmission rates between servers and network components
PoE+ port to receive data and up to 25.5 W of power on a single cable in places where a power outlet is not available
Features 24 networking ports to meet the requirements of the most demanding workgroups
Specifications

Manageable: Yes
Layer Supported: 3
Expansion Slot Type: SFP+
Number of Total Expansion Slots: 4
Number of SFP+ Slots: 4
Shared SFP Slot: No
Network Technology: 10GBase-X, 1000Base-T
Ethernet Technology: Gigabit Ethernet, 10 Gigabit Ethernet
Media Type Supported: Optical Fiber, Twisted Pair
Modular: Yes
Uplink Port: Yes
Total Number of Network Ports: 24
Port/Expansion Slot Details: 4 x 10 Gigabit Ethernet Expansion Slot, 24 x Gigabit Ethernet PoE+

Overview
Nebula Cloud-managed Layer 3 Enterprise Switch The XGS2220 Series is a family of Layer 3 access Switches that consists of six models, including PoE, Non PoE and Fiber options. Non PoE models offer Gigabit desktop ports for everyday network access; PoE models allow flexible options with larger PoE budgets and a mix of 60 W and 30 W ports to power devices like the latest WiFi 6/6E Wireless Access Points; The Fiber model aims to achieve business connectivity for high fiber port density requirement.

Flexible 10G For Converged Networking Applications On top of four 10G SFP+ uplinks, the XGS2220 Series comes with two additional 10G Multi-Gig RJ 45 ports to offer the flexibility to connect to servers, network storage, or other high speed network devices. Business can operate smoothly with the better extensibility and robust network infrastructure.

Multiple Power Budget options PoE models come with 10 ports of PoE++ (IEEE 802.3bt) offering up to 60 W per port and 16-40 ports of PoE+ (IEEE 802.3at) delivering up to 30 W per port to meet a variety of applications, including the latest generation of Wireless Access Points.

Within the range, the 3 PoE models of 30HP, 54HP and 54FP can offer larger Power budgets of 400 W, 600 W and 960 W respectively, allowing flexibility in powering a full range of PoE devices efficiently for applications like VoIP, surveillance, high density networked AV applications and Zyxel’s compressive WiFi 6/6E AP portfolio.

Nebula, Manage It Your Way! The support of NebulaFlex Pro allows you to easily switch management modes between standalone management and intuitive Nebula cloud managed mode with 1 YEAR Pro Pack bundled. Nebula provides both intuitive web interface and mobile App to deliver a streamlined experience for installation and management of your network, without additional cost for a software or hardware controller.

Anytime, Anywhere with Nebula Mobile App -Easy device onboarding: QR code scan

-At a glance of network status

-Remote control your network

-Reboot AP, Camera by PoE power cycle

-Block clients with unusual traffic

Dedicated Networked AV Mode The XGS2220 series includes a tailor-made networked AV mode when used in standalone mode. You can switch interfaces to simplify the installation of AVoIP with an intuitive wizard that prompts high level requirements for this type of network infrastructure; leveraging from AI intelligence, the switch is then able to remove the complexity by applying all the necessary details to set up a professional AVoIP deployment in minutes.

When deployed in Networked AV mode the switch gives you a dedicated dashboard allowing quick access to the key AV network elements such as IGMP and IP information as well as fast access to configuration functions often associated with AVoIP deployments.

The Aruba CX 6300 Switch Series is a modern, flexible, and intelligent family of AOS-CX stackable switches ideal for enterprise access and aggregation. With a cloud-centric design that combines a fully programmable OS with the Aruba Network Analytics Engine, the Aruba CX 6300 extends industry-leading monitoring and troubleshooting capabilities to the access layer. Support of Aruba NetEdit and the Aruba CX Mobile App verify that configurations are flawless and easy to deploy. A powerful Aruba Gen7 ASIC architecture delivers fast, non-blocking performance, meaning your network is ready for tomorrow’s unpredictable demands. Aruba Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management. This flexible series has built-in wirespeed 1/10/25/50GbE uplinks and supports high density IEEE 802.3bt high power PoE with HPE Smart Rate multi-gigabit Ethernet for high speed APs and IoT devices using existing cabling.

What's new

Stackable Layer 3 switches with BGP, EVPN, VXLAN, VRF, and OSPF with robust security and QoS. - High performance 880 Gbps system switching capacity, 660 MPPS of system throughput and up to 200 Gbps stacking bandwidth. - Compact 1U switches with full density HPE Smart Rate (1/2.5/5GbE) multi-gigabit, 60W PoE, and SFP+ models. - Built-in high speed 10GbE/25GbE/50GbE uplinks with intelligent monitoring and visibility via Aruba Network Analytics Engine. - Aruba NetEdit support for automation, configuration and verification, and one touch deployment with the Aruba CX Mobile App. - Aruba Dynamic Segmentation enables enhanced security and simple access for users and IoT.

Features

Automation and Analytics

The Aruba CX 6300 Switch Series delivers unparalleled visibility with built-in analytics for real-time monitoring and troubleshooting to help fix problems faster. The Aruba Network Analytics Engine (NAE) automatically interrogates and analyzes events that can impact network health. - Advanced telemetry and automation provide the ability to easily identify and troubleshoot network, system, application and security related issues easily, through the use of Python agents and REST APIs. - The Time Series Database (TSDB) stores configuration and operational state data, making it available to quickly resolve network issues.

Performance and Power

The Aruba CX 6300 Switch Series uses a fully distributed architecture with Aruba Gen7 ASICs that deliver very low latency, increased packet buffering, and adaptive power consumption. All switching and routing are wire-speed to meet the demands of bandwidth-intensive applications. - Aruba Virtual Switching Framework (VSF) allows you to quickly grow your network using high performance front plane stacking. Four built-in QSFP28 ports support speeds of 1GbE, 10GbE, 25GbE, and 50GbE for a total of up to 200 Gbps of stacking throughput per switch. - Deploy wireless access points and IoT devices with Aruba CX 6300 models that offer high density HPE Smart Rate multi-gigabit Ethernet with 60W PoE on every port for a total of 2880W of PoE.

Smarter Segmentation

The Aruba CX 6300 Switch Series supports Aruba Dynamic Segmentation that automatically applies and enforces user, device, and application-aware policies on Aruba wired and wireless infrastructures. - Automated device profiling, role-based access control, and Layer 7 firewall features deliver enhanced visibility and performance for a better overall experience for both IT and end-users alike. - Switch-to-switch tunnels enable scalable multi-tenancy support with VXLAN to VRF mapping, while allowing policy application via user roles.

Specifications

Switch type: Managed
Switch layer: L3
Processor model: ARM Cortex-A72
Processor frequency: 1800 MHz
Data transmission

Throughput: 476 Mpps
Latency (1 Gbps): 4.24 µs
Latency (10 Gbps): 1.5 µs
Switching capacity: 640 Gbit/s

The Aruba Instant On 1930 switch series is designed for small and growing businesses that require enhanced performance to support bandwidth-demanding applications. The Aruba Instant On 1930 switch series seamlessly integrates with existing Instant On indoor/outdoor access points and can be centrally managed with the Instant On mobile app onsite or remotely. These cloud-managed layer 2+ Ethernet switches consist of 8-, 24-, and 48-port Class 4 PoE (i.e. PoE+) and non-PoE Gigabit Ethernet models, with 1G SFP slots on 8-port model and 1G/10G SFP+ slots on 24-/48G models for fiber connectivity.

What's New

Seven advanced smart managed Layer 2+ Gigabit switches for high-performance connectivity.
Non-PoE and Class 4 PoE (i.e. PoE+) 8-, 24- and 48-port models for deployment flexibility.
1G/10G SFP+ ports on 24-and 48-port models for fiber connectivity.
Aruba Instant On mobile app and/or cloud-based web portal for easy network management onsite or remotely.
Option to manage your switches through local web GUI.
Limited Lifetime Warranty.
Simplify Network Deployment and Management for Small Organizations

The Aruba Instant On 1930 switch series features easy-to-use, out-of-the-box, plug-and-play deployment.

The series offers a complete portfolio of choices for increased small business flexibility. It consists of seven models including 8G-, 24G-, and 48G-ports with and without class 4 PoE (i.e. PoE+).

The 24- and 48- port models include four SFP/SFP+ transceiver slots that support Gigabit or 10-Gigabit speeds for fiber connectivity.

The Aruba Instant On 1930 switch series can be deployed using two management modes – Instant On cloud-management (access via mobile app and/or web portal) and the local web GUI.

Keep Your Business Protected with Integrated Security Features

The Aruba Instant On 1930 switch series supports energy efficient Ethernet for lower power consumption and an enhanced feature set for more robust operation.

Enhanced security features such as IEEE 802.1x, and VLANs guard your network from unwanted or unauthorized access.

Automatic denial-of-service (DOS) monitors and protects the network against malicious attacks.

Management security restricts access to critical configuration commands, offers multiple privilege levels with password protection.

Deliver High Perfomance

The Aruba Instant On 1930 switch series delivers advanced functionalities including customizable like VLANs, link aggregation, Spanning Tree Protocols, and IEEE 802.1X access control.

8-, 24-, and 48-port configurations with a choice of non-PoE and Class 4 PoE models provides deployment flexibility that fits all small business environment. Class4 PoE options allow to power devices like IP phones, surveillance cameras and access points, without the cost of additional cabling.

The 24- and 48-port models include 1G/10G SFP+ ports for reliable fiber connectivity and other connections across longer distances.

The switch series is covered by the Limited Lifetime Warranty with 24x7 phone support for 90 days and chat support for the entire warranty duration.

The NETGEAR PoE+ Gigabit Smart switches with Remote/Cloud Management provides a great value, with configurable L2 network features like VLANs and PoE operation scheduling, allowing SMB customers to deploy PoEbased VoIP phones, IP cameras, videoover-IP endpoints and Wireless access points simply and securely. Advanced features such as IPv4/IPv6 Layer 3 static routing, LACP link aggregation, DiffServ QoS, Private VLANs, Multicast VLAN Registration and Spanning Tree will satisfy even the most advanced small business networks.

Key features include:
- Quiet rack mounting operation with 26.80 to 39.30dBA at 25°C (77°F) ambient
- Layer 3 static routing with 32 routes (IPv4 and IPv6) for interVLAN local routing
- Advanced VLAN and Private VLAN support for better network segmentation
- L2/L3/L4 access control lists (ACLs) for granular network access control including 802.1x port authentication
- Advanced per port PoE controls for remote power management of PoE connected devices including operation scheduling (e.g. Wireless APs, IP security cameras, LED lighting, secure access door locks, IoT devices…)
- Advanced QoS (Quality of Service) for traffic prioritization including port-based, 802.1p and L2/L3/L4 DSCP-based
- Auto “denial-of-service” (DoS) prevention
- IGMP Snooping and Querier for multicast optimization
- Multicast VLAN Registration (MVR) for larger L2 multicast networks and AV over IP deployment
- Dynamic ARP for increased security targeting a class of Man in the Middle attack
- Rate limiting and priority queuing for better bandwidth allocation
- Port mirroring for network monitoring
- Energy Efficient Ethernet (IEEE 802.3az) for maximum power savings
- Cable test to troubleshoot connection issues
- SNMP v1, v2c, v3 and RMON remote monitoring

Build a future-proof network with NETGEAR:
- Solid performance with non-blocking architecture, 16K MAC addresses, 256 VLANs, 100 shared (ingress) ACLs and 512 Multicast groups
- Comprehensive IPv6 supporting management, QoS, ACL and routing, ensuring investment protection and a smooth migration to IPv6-based network
- PoE+ support on all models and on all ports
- 4 Dedicated SFPs, not only providing fiber uplinks, but also uplink redundancy and failover, improving reliability and availability for the network

Fully-integrated cloud-manageable devices
- Remote/Cloud Management capability with NETGEAR Insight. Instantly activate NETGEAR Insight Cloud management from the web GUI, for simpler configuration and deployment from anywhere using the NETGEAR Insight app on mobile devices or the Insight Cloud portal through a web browser

Smart IT, not Big IT
- Easy-to-use Web browser-based management GUI
- Network Management System (NMS300), allowing all NETGEAR business products to be deployed and managed through this single interface
- Dual firmware images improve reliability and uptime to your network
- Text-based Lite Command-line Interface (CLI)

NETGEAR quality and reliability
- Worry-free NETGEAR Limited Lifetime Warranty*, online technical chat support and Next Business Day (NBD) replacement
- 90-days Free 24x7 Advanced Technical Phone Support**

Lite Lite Layer 3 stackable managed switch for a secure enterprise or metro Ethernet access network.

Adaptable, Bottleneck-Free 10G Business Connectivity

The DGS-3130 Series is a highly versatile Lite Layer 3 stackable switch. Including powerful L2 & L3 features, as well as support for multiple software images, it is highly pliant, capable of accommodating different network deployments.

With network bottlenecks on the rise, the DGS-3130 Series's six 10 Gigabit uplink ports are an ideal solution. Business can flexibly increase their bandwidth with flexibility to incrementally meet growing bandwidth demands.

Highly Reliable

Redundant power supply (RPS) support, Ethernet Ring Protection (ERPS) and 6 kV surge protection on all GE and RJ-45 access ports

Feature-Rich Unified Software

Powerful L2 and L3 features such as Static Route, RIP/RIPng and OSPFv2/v3

Scalable and Highly Available

Supports high bandwidth stacking and fault tolerant topologies

Easy Access Control

Support for 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC)

24 x 10/100/1000BASE-T PoE ports
2 x 10GBASE-T and 4 x 10G SFP+ ports provide all the uplink capacity your network needs
Premium L2 and L3 features effortlessly improve network efficiency and reduce unnecessary data transfer
High redundancy features to provide professional-grade reliability and a longer product life:
Dual power inputs
Ethernet Ring Protection Switching with <50ms recovery time
6 kV surge protection protects the device and those connected from unexpected surges
802.1d/w/s Spanning Tree Protocol avoids potentially network crippling loops
RIP/RIPng and OSFPv2/v3 dynamically map out your network, aiding data to get to its destination via the fastest route possible.
A formidable PoE budget of 370 W allows powering of numerous external devices (further expandable to 740 W)
Expand capacity in a flash with physical stacking up to 9 units
80 Gbps per device physical stacking bandwidth
The Smart fan self-adjusts accordingly to maintain optimal operating temperatures
Power Even More Devices

The DGS-3130-30PS model features Power over Ethernet, which compatible devices to be powered by the switch through a standard Ethernet cable. It supports the IEEE 802.3af PoE and IEEE 802.3at PoE+ standards, providing up to 30W of power per port. PoE effectively reduces deployment time for PoE devices such as IP cameras, VoIP phones, and access points, and eliminates the cost for additional electrical cabling. The 370W PoE power budget, which can be increased to 740 W when outfitted with the DPS-700 redundant power supply, allow the switches to power even more devices. Additionally, an extended Link Layer Discovery Protocol (LLDP) automatically negotiates and manages the power feed to IEEE 802.3at PoE+ powered devices for optimal power distribution.

Weather the Storm

The DGS-3130 Series features built-in 6 kV surge protection on all PoE and non-PoE Gigabit Ethernet access ports without needing external surge protection. This effectively protects the switches against sudden electrical surges caused events such as lightning strikes or unstable electrical current. This significantly reduces the chances of equipment being damaged, effectively lowering maintenance costs by minimizing the need for expensive repairs or replacement.

Highly Available. Highly Flexible.

The D-Link DGS-3130 Lite Layer 3 Stackable Managed Switches are a Gigabit access layer solution specifically designed to connect end-users in a secure enterprise or metro Ethernet access network.

The switches support high bandwidth, long distance stacking, with physical stacking of up to 9 units over fiber, increasing available Gigabit ports on demand. This makes them ideal for network administrators who demand agile expansion functionality without having to sacrifice network reliability.

Slash Your Network Downtime

The DGS-3130 Series gives enterprises and organizations a highly reliable network, allowing for maximum business continuity. It has built-in G.8032 Ethernet Ring Protection Switching (ERPS) to help minimize recovery times to 50 ms.

Along with a host of essential network reliability features, all switches in the series support an external redundant power supply to ensure your operations continue unimpeded.

Comprehensive Security

The DGS-3130 Series gives your network the protection it deserves with leading-edge security features that handle threats effectively. With built-in IP-MAC-Port Binding, the switches allow administrators to enhance user access control.

Other advanced features like DHCP Snooping let the switches automatically learn and save IP/MAC pairs to the IMPB white list.

Powerful and Unified

Powerful L2 and L3 features such as RIP/RIPng and OSPFv2/v3 come together in an integrated software image. This allows the switches to satisfy a wide range of requirements for different applications – perfect for building the solid and networks.

Manage Network Traffic in a Whole New Way

The DGS-3130 Series implements a rich set of multi-layer QoS/CoS features to prioritize critical network services such as VoIP, video conferences, IPTV, and IP surveillance. With robust features including Traffic Shaping, L2 Multicast, Host-based IGMP/MLD Snooping and ISM VLAN, administrators get a whole new way to manage their traffic that fits their needs.

Flexible Access Control Policies

Strict access control and deployment are made easy with the DGS-3130 switches. All support authentication mechanisms such as 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC), and allow individual policies to be assigned to each host after authentication. In addition, the switch also supports Microsoft® NAP (Network Access Protection).

Critical Building Block for Any Small Office Network

From connectivity to cloud applications, networking plays a crucial role in every business journey. Reliability, security, and affordability continue to be top of mind while ongoing management and operations add additional complexity that take time and resources.

Cisco Business is a portfolio of affordable wireless access points, switches and routers designed and built for Small Business. Managed through Cisco Business Dashboard and mobile app, the portfolio provides a simple and reliable experience. Cisco Business Dashboard simplifies traditional challenges in deploying and managing business networks by automating the deployment, monitoring and lifecycle management of the network.

Cisco Business 350 series managed switches

The Cisco Business 350 Series Switches, part of the Cisco Business line of network solutions, is a portfolio of affordable managed switches that provides a critical building block for any small office network. Intuitive dashboard simplifies network setup, and advanced features accelerate digital transformation, while pervasive security protects business critical transactions. The Cisco Business 350 Series Switches provide the ideal combination of affordability and capabilities for small office and helps you create a more efficient, betterconnected workforce. When your business needs advanced networking features and security for the digital transformation yet value is still a top consideration, you're ready for the Cisco Business 350 Series Switches.

Business applications

Whether you need a basic high-performance network to connect employee computers or a solution to deliver data, voice, and video services, the Cisco 350 Business Series Switches offer a solution to meet your needs. Possible deployment scenarios include:

Secure office connectivity: Cisco Business 350 Series Switches can simply and securely connect employees working in small offices with each other and with all of the servers, printers, and other networking devices they use. High performance and reliable connectivity help speed file transfers and data processing, improve network uptime, and keep your employees connected and productive.
Unified communications: As a managed network solution, the Cisco Business 350 Series Switches provide the performance and advanced traffic-handling intelligence you need to deliver all communications and data over a single network. Cisco offers a complete portfolio of IP telephony and other unified communications products designed for businesses. Cisco Business 350 Series Switches have been rigorously tested to help ensure easy integration and full compatibility with these and other products, providing a complete business solution.
Features

Management capability allows maximum efficiency and with unrestricted control
Provides efficient communication with other ethernet switch in the stack to ensure maximum productivity
Effectively increases available bandwidth on your network
Optimize the performance of business networks with 10 Gigabit Ethernet connectivity
Supports layer 3 switching for enhanced performance and usability
Supports optical fibre cable to span longer distances and provided high data transmission rates between servers and network components
Built-in power supply to ensure all components are being supplied with accurate voltage
Features 24 networking ports to establish large network
Specifications

Manageable: Yes
Layer Supported: 3
Expansion Slot Type: SFP+
Number of Total Expansion Slots: 4
Number of SFP+ Slots: 4
Shared SFP Slot: Yes
Network Technology: 10GBase-X
Network Technology: 10GBase-T
Ethernet Technology: 10 Gigabit Ethernet
Media Type Supported: Optical Fiber, Twisted Pair
Network (RJ-45): Yes
Modular: Yes
Stack Port: Yes
Total Number of Network Ports: 24
Port/Expansion Slot Details: 4 x 10 Gigabit Ethernet TP/SFP+ Combo
Port/Expansion Slot Details: 20 x 10 Gigabit Ethernet Network

The Ubiquiti USW-ENTERPRISEXG-24 UniFi 24 Port Managed Layer 3 Enterprise XG Switch is a fully managed, multi-gigabit, Layer 3 switch with (24) 10GbE RJ45 ports and (2) 25G SFP28 ports.

The USW Enterprise XG 24 also features a 1.3" LCM color touchscreen that concisely displays key system and connection insights. Additionally, the USW Enterprise XG 24 offers enhanced power supply failure protection when connected to the SmartPower Redundant Power System (USP RPS sold separately). This switch can be monitored or configured from anywhere with the powerful, intuitive UniFi Network web application and mobile app.

Product Features

(24) 10 GbE ports
(2) 25G SFP28 ports
DC power backup-ready
Layer 3 switching


Ubiquiti Extended Warranty

Ubiquiti currently offers 1 year standard manufacturer warranty on equipment purchased through official UK distributors.

In the unlikely event that you have any issues with your Ubiquiti product within the 1 year of manufacturer warranty, please contact your account manager in the first instance. Our technical team will do everything they can to find a resolution to your problem. If a fix cannot be provided, then an RMA will need to be registered via the Ubiquiti Reseller Portal.

On all purchases made through Comms Express, we offer our customers options to upgrade the standard manufacturer warranty to a 3 or 5 year advanced hardware replacement.

Available warranty options:







 

The Aruba CX 6300 Switch Series is a modern, flexible, and intelligent family of AOS-CX stackable switches ideal for enterprise access and aggregation. With a cloud-centric design that combines a fully programmable OS with the Aruba Network Analytics Engine, the Aruba CX 6300 extends industry-leading monitoring and troubleshooting capabilities to the access layer. Support of Aruba NetEdit and the Aruba CX Mobile App verify that configurations are flawless and easy to deploy.

A powerful Aruba Gen7 ASIC architecture delivers fast, non-blocking performance, meaning your network is ready for tomorrow’s unpredictable demands. Aruba Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management. This flexible series has built-in wirespeed 1/10/25/50GbE uplinks and supports high density IEEE 802.3bt high power PoE with HPE Smart Rate multi-gigabit Ethernet for high speed APs and IoT devices using existing cabling.

Features

Stackable Layer 3 switches with BGP, EVPN, VXLAN, VRF, and OSPF with robust security and QoS. Now supporting MACsec 256, PTP, AVB and LRM.

High performance 880 to 1760 Gbps system switching capacity, 660 to 1310 MPPS of system throughput and up to 200 to 400 Gbps stacking bandwidth.

Series includes full density HPE Smart Rate (1/2.5/5GbE) multi-gigabit and up to 90W PoE, SFP+ model and switch bundle with power-to-port airflow for data center 1GbE ToR and OOBM deployments.

Built-in high speed 10/25/40/50/100GbE uplinks (50GbE for DAC connectivity only) with intelligent monitoring and visibility via the Network Analytics Engine.

Manage via single pane of glass with HPE Aruba Networking Central across wired, wireless, and WAN Dynamic Segmentation enables enhanced security and simple access for users and IoT.

Automation and Analytics

The Aruba CX 6300 Switch Series delivers unparalleled visibility with built-in analytics for real-time monitoring and troubleshooting to help fix problems faster. The Aruba Network Analytics Engine (NAE) automatically interrogates and analyzes events that can impact network health. - Advanced telemetry and automation provide the ability to easily identify and troubleshoot network, system, application and security related issues easily, through the use of Python agents and REST APIs. - The Time Series Database (TSDB) stores configuration and operational state data, making it available to quickly resolve network issues.

Performance and Power

The Aruba CX 6300 Switch Series uses a fully distributed architecture with Aruba Gen7 ASICs that deliver very low latency, increased packet buffering, and adaptive power consumption. All switching and routing are wire-speed to meet the demands of bandwidth-intensive applications. - Aruba Virtual Switching Framework (VSF) allows you to quickly grow your network using high performance front plane stacking. Four built-in QSFP28 ports support speeds of 1GbE, 10GbE, 25GbE, and 50GbE for a total of up to 200 Gbps of stacking throughput per switch. - Deploy wireless access points and IoT devices with Aruba CX 6300 models that offer high density HPE Smart Rate multi-gigabit Ethernet with 60W PoE on every port for a total of 2880W of PoE.

Smarter Segmentation

The Aruba CX 6300 Switch Series supports Aruba Dynamic Segmentation that automatically applies and enforces user, device, and application-aware policies on Aruba wired and wireless infrastructures. - Automated device profiling, role-based access control, and Layer 7 firewall features deliver enhanced visibility and performance for a better overall experience for both IT and end-users alike. - Switch-to-switch tunnels enable scalable multi-tenancy support with VXLAN to VRF mapping, while allowing policy application via user roles.

Specifications

Switch type: Managed
Switch layer: L3
Processor model: ARM Cortex-A72
Data transmission

Throughput: 334 Mpps
Latency (1 Gbps): 2.2 µs
Latency (10 Gbps): 1.46 µs
Switching capacity: 448 Gbit/s

Product overview

From connectivity to cloud applications, networking plays a crucial role in every business journey. Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources.

Cisco Business is a portfolio of affordable wireless access points, switches, and routers designed and built for Small Business. Managed through Cisco Business Dashboard and mobile app, the portfolio provides a simple and reliable experience. Cisco Business Dashboard simplifies traditional challenges in deploying and managing business networks by automating the deployment, monitoring, and lifecycle management of the network.

Cisco Business 220 Series Smart Switches

The Cisco Business 220 Series are affordable smart switches with ease of use, security, and reliability for business-class networks. With intuitive dashboard, Power over Ethernet (PoE) options, and customizable features, these switches deliver a solid business network within your budget parameters. When you need a business-class network and cost is top priority, Cisco Business 220 Series provides an excellent solution.

Prominent feature | Business Applications

With Cisco Business 220 Series switches, you can not only build an efficient and reliable network to connect the workforce, you can also create advanced solutions to deliver data, voice, and video services on a converged infrastructure. Get the best value for your money by improving the productivity of employees. Possible deployment scenarios include:

Small office networking: The versatility and affordability of the Cisco Business 220 Series family of switches provide an ideal business-class networking foundation for small businesses with limited IT support and budget.
Wireless connectivity: With PoE+ support, and comprehensive security and Quality of Service (QoS) capabilities, Cisco Business 220 Series switches provide a solid foundation to add business-grade wireless to the network. You can easily deploy Cisco Business wireless access points to increase workforce productivity without worrying about power and throughput.
Unified communications: The Cisco Business 220 Series switches provide QoS features to automatically prioritize delay-sensitive traffic to help you easily deploy an IP-based communication solution on a converged network. PoE+ support can enable IP cameras and videophones to be easily added to your current network. Cisco offers a complete portfolio of IP telephony and other unified communications products designed for small businesses. Cisco Business 220 Series switches have been rigorously tested to help ensure easy integration and full compatibility with these and other vendor products.
Features

Management capability allows maximum efficiency and with unrestricted control
Lets you conveniently connect different networks to enable improved flexibility to your infrastructure
Effectively increases available bandwidth on your network
Gigabit Ethernet port for ultra-fast network speeds
With leading Layer 2 support, experience enhanced convenience, secure business operations, and a borderless network experience
Supports optical fibre cable to span longer distances and provided high data transmission rates between servers and network components
Built-in power supply to ensure all components are being supplied with accurate voltage
Features 24 networking ports to meet the requirements of the most demanding workgroups
Specifications

Manageable: Yes
Layer Supported: 2
Expansion Slot Type: SFP (mini-GBIC)
Number of Total Expansion Slots: 4
Number of SFP Slots: 4
Network (RJ-45): Yes
Modular: Yes
Uplink Port: Yes
Total Number of Network Ports: 24
Port/Expansion Slot Details: 4 x Gigabit Ethernet Expansion Slot, 24 x Gigabit Ethernet PoE
Network Technology: 1000Base-X, 10/100/1000Base-T
Ethernet Technology: Gigabit Ethernet
Media Type Supported: Optical Fiber, Twisted Pair

Perfect choice for simple SMB setup

Near silent operation

The GS1900 Series includes both fan-less and built-in smart fan models. The smart fan is designed to automatically adjust speed based on device temperature. You can barely hear the sound while the switch is operating. It is ideal for your office environment.

Intelligent PoE+ powers more devices

PoE models (8HP/10HP/24EP/24HPv2/48HPv2) come with default PoE consumption mode which delivers only the actual power required by your networked devices, reserves the rest and optimizes its power budget. That means a single switch can power more APs, IP cameras and VoIP phones, ensuring a better ROI for your business. All of them support the IEEE 802.3at providing a maximum of 30W per port.

Speedy Gigabit performance-built for SMBs

The GS1900 is a series of switches with full non-blocking bandwidth of up to 1 Gbps per port. An ideal upgrade from an unmanaged switch, it's a great choice for SMBs that want to enjoy high-speed business network applications at full wired non-blocking speed.

The Aruba CX 6300 Switch Series is a modern, flexible and intelligent family of stackable switches ideal for enterprise access, aggregation and core deployments.

A powerful distributed architecture supports scalable, non-blocking performance to future-proof your network for tomorrow’s unpredictable demands. This series has built-in, high-speed uplinks and include models with 24 SFP+ ports and full-density 60W PoE with multi-gigabit Ethernet for a high-performance network.

A cloud-centric design with a fully programmable OS delivers automation and simplicity, including easy-to-use configuration tools for error-free installs. Built-in monitoring and analytics across the network provide operators with immediate troubleshooting and problem resolution insights.

The HPE Aruba Networking CX 6300 Switch Series uses a fully distributed architecture with HPE Aruba Gen7 ASICs that deliver very low latency, increased packet buffering, and adaptive power consumption. All switching and routing are wire-speed to meet the demands of bandwidth-intensive applications.

HPE Aruba Networking Virtual Switching Framework (VSF) allows you to quickly grow your network using high performance front plane stacking. Four built-in QSFP28 ports support speeds of 1/10/25/50GbE (50GbE for DAC connectivity only) for a total of up to 200 Gbps of stacking throughput per switch.

Deploy wireless access points and IoT devices with HPE Aruba Networking CX 6300 models that offer high density HPE Smart Rate multi-gigabit Ethernet with 90W PoE on every port for a total of 2880W of PoE.

Specifications

Switch type: Managed
Switch layer: L3
Processor model: ARM Cortex-A72
Packet buffer memory: 8 MB
Power consumption (max): 85 W
Data transmission

Throughput: 654 Mpps
Latency (1 Gbps): 1.99 µs
Latency (10 Gbps): 1.49 µs
Switching capacity: 880 Gbit/s

The Ubiquiti UniFi USW-Pro-24 is a fully managed Layer 3 switch with (24) Gigabit Ethernet ports. (2) 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability. The UniFi Switch Pro 24 features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server. The UniFi Switch Pro 24 is an ideal aggregation and access layer switch for any UniFi solution – it combines innovative near-silent cooling with UniFi SmartPower RPS power redundancy. UniFi Network Controller and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere.

Ubiquiti UniFi USW-Pro-24 Switch Key Features

(24) Gigabit RJ45 ports
(2) 10G SFP+ ports
Layer 2 and Layer 3 features
UniFi SmartPower RPS DC input
Near-silent cooling
1.3" touchscreen display
Managed by UniFi Network Controller


Ubiquiti Extended Warranty

Ubiquiti currently offers 1 year standard manufacturer warranty on equipment purchased through official UK distributors.

In the unlikely event that you have any issues with your Ubiquiti product within the 1 year of manufacturer warranty, please contact your account manager in the first instance. Our technical team will do everything they can to find a resolution to your problem. If a fix cannot be provided, then an RMA will need to be registered via the Ubiquiti Reseller Portal.

On all purchases made through Comms Express, we offer our customers options to upgrade the standard manufacturer warranty to a 3 or 5 year advanced hardware replacement.

Available warranty options:

 

Lite Lite Layer 3 stackable managed switch for a secure enterprise or metro Ethernet access network.

Adaptable, Bottleneck-Free 10G Business Connectivity

The DGS-3130 Series is a highly versatile Lite Layer 3 stackable switch. Including powerful L2 & L3 features, as well as support for multiple software images, it is highly pliant, capable of accommodating different network deployments.

With network bottlenecks on the rise, the DGS-3130 Series's six 10 Gigabit uplink ports are an ideal solution. Business can flexibly increase their bandwidth with flexibility to incrementally meet growing bandwidth demands.

Highly Reliable

Redundant power supply (RPS) support, Ethernet Ring Protection (ERPS) and 6 kV surge protection on all GE and RJ-45 access ports

Feature-Rich Unified Software

Powerful L2 and L3 features such as Static Route, RIP/RIPng and OSPFv2/v3

Scalable and Highly Available

Supports high bandwidth stacking and fault tolerant topologies

Easy Access Control

Support for 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC)

24 x SFP ports
2 x 10GBASE-T and 4 x 10G SFP+ ports provide all the uplink capacity your network needs
Premium L2 and L3 features effortlessly improve network efficiency and reduce unnecessary data transfer
High redundancy features to provide professional-grade reliability and a longer product life:
Dual power inputs
Ethernet Ring Protection Switching with <50ms recovery time
6 kV surge protection protects the device and those connected from unexpected surges
802.1d/w/s Spanning Tree Protocol avoids potentially network crippling loops
RIP/RIPng and OSFPv2/v3 dynamically map out your network, aiding data to get to its destination via the fastest route possible.
Expand capacity in a flash with physical stacking up to 9 units
80 Gbps per device physical stacking bandwidth
The Smart fan self-adjusts accordingly to maintain optimal operating temperatures
Weather the Storm

The DGS-3130 Series features built-in 6 kV surge protection on all PoE and non-PoE Gigabit Ethernet access ports without needing external surge protection. This effectively protects the switches against sudden electrical surges caused events such as lightning strikes or unstable electrical current. This significantly reduces the chances of equipment being damaged, effectively lowering maintenance costs by minimizing the need for expensive repairs or replacement.

Highly Available. Highly Flexible.

The D-Link DGS-3130 Lite Layer 3 Stackable Managed Switches are a Gigabit access layer solution specifically designed to connect end-users in a secure enterprise or metro Ethernet access network.

The switches support high bandwidth, long distance stacking, with physical stacking of up to 9 units over fiber, increasing available Gigabit ports on demand. This makes them ideal for network administrators who demand agile expansion functionality without having to sacrifice network reliability.

Slash Your Network Downtime

The DGS-3130 Series gives enterprises and organizations a highly reliable network, allowing for maximum business continuity. It has built-in G.8032 Ethernet Ring Protection Switching (ERPS) to help minimize recovery times to 50 ms.

Along with a host of essential network reliability features, all switches in the series support an external redundant power supply to ensure your operations continue unimpeded.

Comprehensive Security

The DGS-3130 Series gives your network the protection it deserves with leading-edge security features that handle threats effectively. With built-in IP-MAC-Port Binding, the switches allow administrators to enhance user access control.

Other advanced features like DHCP Snooping let the switches automatically learn and save IP/MAC pairs to the IMPB white list.

Powerful and Unified

Powerful L2 and L3 features such as RIP/RIPng and OSPFv2/v3 come together in an integrated software image. This allows the switches to satisfy a wide range of requirements for different applications – perfect for building the solid and networks.

Manage Network Traffic in a Whole New Way

The DGS-3130 Series implements a rich set of multi-layer QoS/CoS features to prioritize critical network services such as VoIP, video conferences, IPTV, and IP surveillance. With robust features including Traffic Shaping, L2 Multicast, Host-based IGMP/MLD Snooping and ISM VLAN, administrators get a whole new way to manage their traffic that fits their needs.

Flexible Access Control Policies

Strict access control and deployment are made easy with the DGS-3130 switches. All support authentication mechanisms such as 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC), and allow individual policies to be assigned to each host after authentication. In addition, the switch also supports Microsoft® NAP (Network Access Protection).

Product overview

From connectivity to cloud applications, networking plays a crucial role in every business journey. Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources.

Cisco Business is a portfolio of affordable wireless access points, switches, and routers designed and built for Small Business. Managed through Cisco Business Dashboard and mobile app, the portfolio provides a simple and reliable experience. Cisco Business Dashboard simplifies traditional challenges in deploying and managing business networks by automating the deployment, monitoring, and lifecycle management of the network.

Cisco Business 220 Series Smart Switches

The Cisco Business 220 Series are affordable smart switches with ease of use, security, and reliability for business-class networks. With intuitive dashboard, Power over Ethernet (PoE) options, and customizable features, these switches deliver a solid business network within your budget parameters. When you need a business-class network and cost is top priority, Cisco Business 220 Series provides an excellent solution.

Prominent feature | Business Applications

With Cisco Business 220 Series switches, you can not only build an efficient and reliable network to connect the workforce, you can also create advanced solutions to deliver data, voice, and video services on a converged infrastructure. Get the best value for your money by improving the productivity of employees. Possible deployment scenarios include:

Small office networking: The versatility and affordability of the Cisco Business 220 Series family of switches provide an ideal business-class networking foundation for small businesses with limited IT support and budget.
Wireless connectivity: With PoE+ support, and comprehensive security and Quality of Service (QoS) capabilities, Cisco Business 220 Series switches provide a solid foundation to add business-grade wireless to the network. You can easily deploy Cisco Business wireless access points to increase workforce productivity without worrying about power and throughput.
Unified communications: The Cisco Business 220 Series switches provide QoS features to automatically prioritize delay-sensitive traffic to help you easily deploy an IP-based communication solution on a converged network. PoE+ support can enable IP cameras and videophones to be easily added to your current network. Cisco offers a complete portfolio of IP telephony and other unified communications products designed for small businesses. Cisco Business 220 Series switches have been rigorously tested to help ensure easy integration and full compatibility with these and other vendor products.
Features

Management capability allows maximum efficiency and with unrestricted control
Lets you conveniently connect different networks to enable improved flexibility to your infrastructure
Effectively reduces downtime with improved network performance
Gigabit Ethernet port for ultra-fast network speeds
Layer 2 switch provides a complete lineup of features including IGMP snooping, port mirroring, and spanning tree
Supports optical fibre cable to span longer distances and provided high data transmission rates between servers and network components
Built-in power supply to ensure all components are being supplied with accurate voltage
Features 24 networking ports to establish large network
Specifications

Manageable: Yes
Layer Supported: 2
Expansion Slot Type: SFP+
Number of Total Expansion Slots: 4
Number of SFP+ Slots: 4
Network (RJ-45): Yes
Modular: Yes
Uplink Port: Yes
Total Number of Network Ports: 24
Port/Expansion Slot Details: 24 x Gigabit Ethernet PoE+, 4 x 10 Gigabit Ethernet Expansion Slot
Network Technology: 10/100/1000Base-T, 10GBase-X
Ethernet Technology: Gigabit Ethernet, 10 Gigabit Ethernet
Media Type Supported: Optical Fiber, Twisted Pair

The Ubiquiti USW-24 UniFi 24-Port Gigabit Ethernet Switch is a Layer 2 configurable switch featuring 24 Gigabit Ethernet ports and 2 SFP ports, providing a 1Gbps fiber uplink option for your network. It also includes a 1.3" liquid crystal touchscreen display that shows the current switch state and other diagnostic information, all within a compact, fanless design.

DescriptionThe USW-24 is managed and configured by the UniFi Network Controller (version 5.12.32 or higher) and supports the UniFi mobile app. It offers an extensive suite of advanced Layer 2 switching protocols and features, including per-port operating modes (switching, mirroring, or aggregate).



Ubiquiti Extended Warranty

Ubiquiti currently offers 1 year standard manufacturer warranty on equipment purchased through official UK distributors.

In the unlikely event that you have any issues with your Ubiquiti product within the 1 year of manufacturer warranty, please contact your account manager in the first instance. Our technical team will do everything they can to find a resolution to your problem. If a fix cannot be provided, then an RMA will need to be registered via the Ubiquiti Reseller Portal.

On all purchases made through Comms Express, we offer our customers options to upgrade the standard manufacturer warranty to a 3 or 5 year advanced hardware replacement.

Available warranty options:







 

Aruba CX 6100 24-Ports 4SFP+ L3 Managed PoE Switch

Entry-level access switches ideal for branch offices, mid-market enterprises, and SMB networks looking for reliable and convenient access.


Features • Enterprise-class Layer 2 connectivity with support for ACLs, robust QoS and static routing

• Convenient built-in 1/10GbE uplinks and up to 370W of Class 4 PoE for support of IoT devices

• Compact and fanless 12 port model for quiet deployment

• Management flexibility with support for Aruba Central, easy-to-use Web GUI, CLI, and Aruba NetEdit

• Simple deployment with Zero Touch Provisioning

• Software defined ready with REST APIs

• Simplify adds, moves and changes with colorless ports




Why upgrade to CX 6100? Is your network ready to quickly and safely connect new devices? Can it handle new traffic loads? Is it smart enough to help IT more efficiently operate, manage, and secure the network? The next-gen, entry level Aruba CX switch series ensures you can deliver the digital experiences of the future.


The Aruba CX 6100 Switch Series is modern family of entry level access switches ideal for enterprise branch offices and SMB networks. Optimized for reliable, simple and secure access, the CX 6100 switches provide a convenient wired access solution for networks supporting IoT, mobile and cloud applications.

The CX 6100 series is based on the Aruba ASIC architecture with the programmable AOS-CX operating system used across the entire Aruba CX portfolio for a more consistent, more efficient operator experience. This fully managed layer 2 switch series has convenient built-in high speed uplinks with up to 370W of PoE to support IoT devices such as security cameras and wireless APs, and includes a compact and fanless model ideal for use in quiet work spaces.

The CX 6100 supports management choices that include Web GUI, CLI, cloud-based and on-premise Aruba Central, so you can choose the best fit for your needs today with flexibility to change without replacing hardware. With enhanced access security, traffic prioritization, and IPv6 support, the CX 6100 also simplifies ownership and brings peace of mind with no switch software licensing and a Limited Lifetime Warranty.




Ideal for branch offices, mid-market enterprises, and SMBs The CX 6100 access switches provide the performance, security, and simplicity that you need.



Simple, secure, and reliable

This Layer 2 switch series is ready for simple deployment with plenty of PoE for IoT, fast 10GbE uplinks, and robust security features like ACLs and static routing to help protect your network.

Power and speed for users and IoT

This Layer 2 switch series has convenient, built-in, high-speed uplinks with up to 370W of PoE to support IoT devices such as security cameras and wireless access points.

Cloud-based management

Built on a cloud-native microservices architecture, Aruba Central delivers full-service AI insights, security and unified infrastructure management for campus, branch, remote, and data center networks — all from a single pane of glass. It’s network configuration and operations made simple.

 


Entry-level, reliable, and secure wired access These access switches provide the performance, security, and simplicity that you need, making them ideal for branch offices, mid-market enterprises, and SMB networks.



Enterprise-class layer 2 connectivity

This high performance Layer 2 switch with support for ACLs, robust QoS, static routing, and IPv6 is ready to power your access layer.

PoE and High Speed Uplinks

Convenient built-in 1/10GbE uplinks and up to 370W of Class 4 PoE for support of IoT devices and wireless access points.

Management flexibility

The fully programmable CX 6100 series supports a choice of management, including cloud-based and on-prem Central*, CLI, switch Web GUI, and programmability with AOS-CX operating system and REST APIs.

Quiet and compact 12 port

This fanless 12-port model has four high-speed uplinks, and 139W of PoE to power access points and IoT devices.

 
Full specification and details can be found in the Product Datasheet PDF file

Features

Enterprise-class connectivity with support for ACLs, robust QoS, and common protocols such as static and Access OSPF routing.

Scalability with 8 member VSF stacking. 24 and 48-port fixed and modular switch models can stack together for up to 384 ports.

Models include modular switches with 1/10GbE uplinks, LRM, and MACSec 256, fixed switches with either 1/10GbE SFP+ or 1GbE SFP uplinks, and options that support 30W to 60W of PoE per port.

Intelligent monitoring and visibility via Aruba Network Analytics Engine. Aruba NetEdit support for automation, configuration and verification. One touch deployment using the Aruba CX Mobile App.

Aruba Dynamic Segmentation enables enhanced security and simple access for users and IoT.

Automation and Analytics

The HPE Aruba Networking CX 6200 Switch Series delivers unparalleled visibility with built-in analytics for real-time monitoring and troubleshooting to help fix problems faster. The Aruba Network Analytics Engine (NAE) automatically interrogates and analyzes events that can impact network health. Advanced telemetry and automation provide the ability to easily identify and troubleshoot network, system, application, and security related issues easily through the use of Python agents and REST APIs. The Time Series Database (TSDB) stores configuration and operational state data, making it available to quickly resolve network issues.

Aruba NetEdit introduces automation that allows for rapid network-wide changes, and ensures policy conformance post network updates. Intelligent capabilities include search, edit, validation (including conformance checking), deployment, and audit features. The Aruba CX Mobile App simplifies connecting, stacking, and managing HPE Aruba Networking CX 6200 switches. Switch information can be imported into Aruba NetEdit for simplified configuration management and to continuously validate the conformance of configurations anywhere in the network.

Performance and Power

The HPE Aruba Networking CX 6200 Switch Series uses a fully distributed architecture with Aruba Gen7 ASICs that delivers very low latency, increased packet buffering, and adaptive power consumption. All switching and routing are wire-speed to meet the demands of bandwidth-intensive applications. Aruba Virtual Switching Framework (VSF) allows you to quickly grow your network using high performance front-plane stacking. Create 8 member stacks using built-in SFP+ ports with flexibility to create stacks that span longer distances using long-range transceivers.

Deploy wireless access points and IoT devices with HPE Aruba Networking CX 6200 models that support up to 1440W IEEE 802.3at Class 6 Power over Ethernet for up to 60W per port. Flexible, modular switch models support hot-swappable, redundant power supplies and fans for enhanced resiliency.

Smarter Segmentation

The HPE Aruba Networking CX 6200 Switch Series supports Aruba Dynamic Segmentation that automatically applies and enforces user, device, and application-aware policies on Aruba wired and wireless infrastructures.

Automated device profiling, role-based access control, and Layer 7 firewall features deliver enhanced visibility and performance for a better overall experience for both IT and end-users alike. Switch-to-switch tunnels with VXLAN for low-latency and high performance use cases.

Specifications

Switch type: Managed
Switch layer: L3
Processor frequency: 1.8 MHz
Processor model: ARM Cortex-A72
Ports & interfaces

Basic switching RJ-45 Ethernet ports quantity: 24
Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000)
Installed SFP modules quantity: 4
Console port: RJ-45/USB Type-C
Data transmission

Throughput: 95.2 Mpps
Switching capacity: 176 Gbit/s

Product overview

From connectivity to cloud applications, networking plays a crucial role in every business journey. Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources.

Cisco Business is a portfolio of affordable wireless access points, switches, and routers designed and built for Small Business. Managed through Cisco Business Dashboard and mobile app, the portfolio provides a simple and reliable experience. Cisco Business Dashboard simplifies traditional challenges in deploying and managing business networks by automating the deployment, monitoring, and lifecycle management of the network.

Cisco Business 220 Series Smart Switches

The Cisco Business 220 Series are affordable smart switches with ease of use, security, and reliability for business-class networks. With intuitive dashboard, Power over Ethernet (PoE) options, and customizable features, these switches deliver a solid business network within your budget parameters. When you need a business-class network and cost is top priority, Cisco Business 220 Series provides an excellent solution.

Prominent feature | Business Applications

With Cisco Business 220 Series switches, you can not only build an efficient and reliable network to connect the workforce, you can also create advanced solutions to deliver data, voice, and video services on a converged infrastructure. Get the best value for your money by improving the productivity of employees. Possible deployment scenarios include:

Small office networking: The versatility and affordability of the Cisco Business 220 Series family of switches provide an ideal business-class networking foundation for small businesses with limited IT support and budget.
Wireless connectivity: With PoE+ support, and comprehensive security and Quality of Service (QoS) capabilities, Cisco Business 220 Series switches provide a solid foundation to add business-grade wireless to the network. You can easily deploy Cisco Business wireless access points to increase workforce productivity without worrying about power and throughput.
Unified communications: The Cisco Business 220 Series switches provide QoS features to automatically prioritize delay-sensitive traffic to help you easily deploy an IP-based communication solution on a converged network. PoE+ support can enable IP cameras and videophones to be easily added to your current network. Cisco offers a complete portfolio of IP telephony and other unified communications products designed for small businesses. Cisco Business 220 Series switches have been rigorously tested to help ensure easy integration and full compatibility with these and other vendor products.
Features

Management capability allows maximum efficiency and with unrestricted control
Lets you conveniently connect different networks to enable improved flexibility to your infrastructure
Effectively increases available bandwidth on your network
Gigabit Ethernet port for ultra-fast network speeds
Layer 2 switch provides a complete lineup of features including IGMP snooping, port mirroring, and spanning tree
Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters
Built-in power supply to ensure all components are being supplied with accurate voltage
Features 24 networking ports to meet the requirements of the most demanding workgroups
Specifications

Manageable: Yes
Layer Supported: 2
Expansion Slot Type: SFP (mini-GBIC)
Number of Total Expansion Slots: 4
Number of SFP Slots: 4
Network (RJ-45): Yes
Modular: Yes
Uplink Port: Yes
Total Number of Network Ports: 24
Port/Expansion Slot Details: 4 x Gigabit Ethernet Expansion Slot, 24 x Gigabit Ethernet PoE
Network Technology: 1000Base-X, 10/100/1000Base-T
Ethernet Technology: Gigabit Ethernet
Media Type Supported: Optical Fiber, Twisted Pair

Maximize efficiency and agility with simple Cloud Network GS1915 Series Cloud Switch Compact and Affordable Cloud-based Switch Series The GS1915 Series includes four 8/24-port switches, with or without PoE options. The two PoE models facilitate wide variety of network setups with flexible PoE budget of both 60 W (8EP) and 130 W (24EP) with all PoE ports supporting IEEE 802.3at PoE+. This Series Switches come with useful features and superior performance just with plug-n-play.

Nebula, The Intelligent Cloud Management The GS1915 Series supports free Nebula cloud management. Nebula provides both intuitive web interface and mobile App to deliver a streamlined experience for installation and management of your network, without additional cost for a software or hardware controller. Typical standalone mode is still available for your preference.

Watch the demo video below:

Watch Demo

Network on Your Palm Anytime, Anywhere with the Nebula Mobile App Easy device onboarding: QR code scan


At a glance of network status


Remote control your network


Reboot AP, Camera by PoE power cycle


Block clients with unusual traffic


The Nebula Ecosystem Nebula supports a comprehensive range of products from switch, AP, security firewall, to 5G/LTE mobile routers. Bringing you an easy and unified network experience.

GS1915 Series is The Best Choice If You Are… Prosumers Small Business Chain Stores Effortless deployment, unified home network experience
Quality connectivity for growing home IOT devices
Simple and unified network experience
Sturdy network performance for daily business operation
Simple to manage and maintain multiple stores
Flexible to expand networking solution for new store location instantly
Power Devices in Your Network Easily GS1915-8EP and GS1915-24EP support 60W and 130W power budget respectively, ideal for setup just a few more AP and Camera for homes and small businesses. With Nebula App, it’s easy to reset an abnormal camera by power cycling it, even when you’re away.

The Aruba CX 6300 Switch Series is a modern, flexible and intelligent family of stackable switches ideal for enterprise access, aggregation and core deployments. A powerful distributed architecture supports scalable, non-blocking performance to future-proof your network for tomorrow’s unpredictable demands. This series has built-in, high-speed uplinks and include models with 24 SFP+ ports and full-density 60W PoE with multi-gigabit Ethernet for a high-performance network. A cloud-centric design with a fully programmable OS delivers automation and simplicity, including easy-to-use configuration tools for error-free installs. Built-in monitoring and analytics across the network provide operators with immediate troubleshooting and problem resolution insights.

Stackable Layer 3 switches with BGP, EVPN, VXLAN, VRF, and OSPF with robust security and QoS. Now supporting MACsec 256, PTP, AVB and LRM.

High performance 880 to 1760 Gbps system switching capacity, 660 to 1310 MPPS of system throughput and up to 200 to 400 Gbps stacking bandwidth.

Series includes full density HPE Smart Rate (1/2.5/5GbE) multi-gigabit and up to 90W PoE, SFP+ model and switch bundle with power-to-port airflow for data center 1GbE ToR and OOBM deployments.

Built-in high speed 10/25/40/50/100GbE uplinks (50GbE for DAC connectivity only) with intelligent monitoring and visibility via the Network Analytics Engine.

Manage via single pane of glass with HPE Aruba Networking Central across wired, wireless, and WAN Dynamic Segmentation enables enhanced security and simple access for users and IoT.

Specifications

Switch type: Managed
Switch layer: L3
Processor model: ARM Cortex-A72
Packet buffer memory: 8 MB
Data transmission

Throughput: 334 Mpps
Latency (1 Gbps): 2.28 µs
Latency (10 Gbps): 1.46 µs
Packet buffer memory: 8 MB
Switching capacity: 448 Gbit/s

Overview
Near silent operation The GS1900 Series includes both fan-less and built-in smart fan models. The smart fan is designed to automatically adjust speed based on device temperature. You can barely hear the sound while the switch is operating. It is ideal for your office environment.

Intelligent PoE+ powers more devices PoE models (8HP/10HP/24EP/24HPv2/48HPv2) come with default PoE consumption mode which delivers only the actual power required by your networked devices, reserves the rest and optimizes its power budget. That means a single switch can power more APs, IP cameras and VoIP phones, ensuring a better ROI for your business. All of them support the IEEE 802.3at providing a maximum of 30W per port.

Speedy Gigabit performance-built for SMBs The GS1900 is a series of switches with full non-blocking bandwidth of up to 1 Gbps per port. An ideal upgrade from an unmanaged switch, it’s a great choice for SMBs that want to enjoy high-speed business network applications at full wired non-blocking speed.

Easy and intuitive management The Smart Managed GS1900 Series switch feature with web-based interface to manage advanced functions such as VLAN, QoS, IGMP Snooping, Link Aggregation (LAG), IPv6 and DoS prevention easily. Also, the user-friendly wizard helps to walk through setup, configuration and even advanced settings quickly.

As a leading provider of network equipment, NETGEAR® Business understands the importance of providing a great choice of speed and power to support core business needs. With the growth of network speed, virtualization, and cloud-based applications like VoIP, video streaming, and IP surveillance, businesses in all sectors must keep up to ensure success. Also, the increase in speeds for WiFi 6 and WiFi 6E access points now require faster speeds in the network.

The MS324TXUP 24-Port Multi-Gigabit (2.5G) Ethernet Ultra60 PoE++ Smart Switch with 4 SFP+ Ports joins the NETGEAR Smart Switch family, adding Multi-Gigabit/10G speed, a high PoE budget for all PoE/PoE+ devices, and Ultra60 PoE++ support. NETGEAR Pro WiFi Access Points and other PoE devices with multi-gig capabilities are perfect for use with the MS324TXUP.

NETGEAR Smart Switches offer powerful L2+/Lite L3 features, great PoE functionality, and enhanced performance and usability. They are purposely designed for modern applications and support BYOD which requires companies to have more bandwidth to ensure smooth network connectivity with no congestion.

Furthermore, for 2.5G speeds there is no requirement to upgrade your cabling beyond Cat5E, allowing for higher speeds without additional cabling upgrade costs.

The MS324TXUP switch supports NETGEAR Insight Cloud management, allowing businesses simpler configuration and deployment from anywhere using the NETGEAR Insight app from mobile devices or the Insight Cloud portal from any device with a web browser.

Key Features

24 Multi-Gigabit 1G/2.5G ports with 4 10G SFP+ ports
24 Ultra60 PoE++ ports with uninterrupted PoE
High powered 720W PoE budget
Energy Efficient Ethernet for maximum power savings
Quiet desktop or rackmount operation
Configurable L2/L2+ network features
NETGEAR Insight Remote Cloud Management
5-year Hardware Limited Warranty 5-year Next Business Day Hardware Replacement, 90-day phone/chat support

This switch comes with 1 Year Free Insight Pro Cloud Management The NETGEAR® new generation Gigabit 28 port (24 port copper + 4 port fibre) high powered PoE+Smart Switch offers powerful L2 features, better PoE functions, and enhanced performance and usability. The GS728TPPv2 comes with 24 PoE+ ports and a total PoE power budget of 384w.It can be used in any deployment with high-density of power-hungry devices, such as multiple 11ac Wireless Access Point, PTZ cameras and Video IP phones.It is purposely designed for the converged networks where voice, video, data are all carried on a single network platform for network eff ciency, operational cost savings, and ease of management.

The 28-port Gigabit with PoE switch comes with 4 dedicated Gigabit SFP ports for fibre connectivity. The new generation of Gigabit PoE Smart Switch from NETGEAR is the optimised solution providing the best value at an affordable SMB price point.



GS728TPPv2 : 24 port 1000Base-T Gigabit PoE Smart Switch
4 dedicated SFP ports
24 PoE+ Ports 384W PoE budget and up to 720W with EPS


Switch Comparison

FS728TPv2 FS728TLP GS724TPv2 GS728TPv2 GS728TPPv2 Form Factor Rackmount Rackmount Rackmount Rackmount Rackmount Port Speed Fast Ethernet Fast Ethernet Gigabit Gigabit Gigabit Copper  (RJ-45) Ports 24 (4 x Gig Ports) 24 (2 x Gig Ports) 24 24 24 1G SFP Fibre Ports 2  2  2 (dedicated) 4 (dedicated) 4 (dedicated) PoE/PoE+ Ports 24 x PoE 802.3af 12 x PoE 802.3af 24 PoE+ 802.3at 24 PoE+ 802.3at 24 PoE+ 802.3at PoE Total Budget 192W 100W 190W 190W 384W PoE Per Port 15.4W 15.4W 30W 30W 30W Power Supply 1 internal PSU, fixed 1 internal PSU, fixed 1 internal PSU, fixed 1 internal PSU, fixed 1 internal PSU, fixed Switching & Routing L2 Switching L2 Switching L2 Switching, L2+ Static IP routing L2 Switching, L2+ Static IP routing L2 Switching, L2+ Static IP routing Features VLAN, QoS, Link Aggregation VLAN, QoS, Link Aggregation VLAN, QoS, Link Aggregation VLAN, QoS, Link Aggregation VLAN, QoS, Link Aggregation Dimensions (WxDxH) mm 440 x 257 x 43 440 x 204 x 43 440 x 204 x 43 440 x 257 x 44 440 x 257 x 43 Highlights:

Designed for Converged Network, Big or Small

Gigabit Speed with 24 ports capable of PoE+
Auto Voice VLAN for fast and reliable deployment of VoIP
Auto Video VLAN, following the same concept of Auto Voice, help speed up your deployment of IP-based surveilliance system
Static routing, helps to route internal traffic for more efficient use of network resources
IGMP and MLD snooping, providing advanced multicast filtering
Build a future-proof network with NETGEAR

Solid performance with non-blocking architecture, 8K MAC addresses, 256 VLANs, 480 shared ACL entries, 32static routes, and 1,024 Multicast Groups
Comprehensive IPv6 supporting management, QoS and ACL, ensuring investment protection and a smooth migration to IPv6-based network
4 Dedicated SFPs, not only providing fibre uplinks, but also uplink redundancy and failover, improving reliability and availability for network virtualisation
Energy Efficient Ethernet (IEEE802.3az) support for more energy saving in the future when more EEE-compliant end devices come to market
Advanced QoS with IPv4/IPv6 ingress traffic filtering (ACLs) and prioritization (QoS - Diff Serv)
Dynamic VLAN assignment for easy user authentication and location-independent access to network

Network Development Made Easy

Auto Voice VLAN for easy development of VoIP
Auto Video for simple deployment of IP Surveillaince
ACL Wizard for a guided tour to set up your network access control
Smart Control Center, a powerful tool for multi-switch discovery, deployment, monitoring and firmware upgrade
PoE Timer for scheduling on/off time of your PoE powered devices.
Smart IT, not Big IT

Easy to manage via web-Based Management GUI or Smart Control Center for multi-switch deployment
Standard-based technology, ensuring interoperability with any standard-based devices in the existing network
Dual firmware images, improving reliability and uptime to your network
Worry-free with NETGEAR ProSAFE Lifetime Hardware Warranty
Assist with customer deployment with 1-year Free 24x7 Advanced Technical Support


  

Product overview

From connectivity to cloud applications, networking plays a crucial role in every business journey. Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources.

Cisco Business is a portfolio of affordable wireless access points, switches, and routers designed and built for Small Business. Managed through Cisco Business Dashboard and mobile app, the portfolio provides a simple and reliable experience. Cisco Business Dashboard simplifies traditional challenges in deploying and managing business networks by automating the deployment, monitoring, and lifecycle management of the network.

Cisco Business 220 Series Smart Switches

The Cisco Business 220 Series are affordable smart switches with ease of use, security, and reliability for business-class networks. With intuitive dashboard, Power over Ethernet (PoE) options, and customizable features, these switches deliver a solid business network within your budget parameters. When you need a business-class network and cost is top priority, Cisco Business 220 Series provides an excellent solution.

Prominent feature | Business Applications

With Cisco Business 220 Series switches, you can not only build an efficient and reliable network to connect the workforce, you can also create advanced solutions to deliver data, voice, and video services on a converged infrastructure. Get the best value for your money by improving the productivity of employees. Possible deployment scenarios include:

Small office networking: The versatility and affordability of the Cisco Business 220 Series family of switches provide an ideal business-class networking foundation for small businesses with limited IT support and budget.
Wireless connectivity: With PoE+ support, and comprehensive security and Quality of Service (QoS) capabilities, Cisco Business 220 Series switches provide a solid foundation to add business-grade wireless to the network. You can easily deploy Cisco Business wireless access points to increase workforce productivity without worrying about power and throughput.
Unified communications: The Cisco Business 220 Series switches provide QoS features to automatically prioritize delay-sensitive traffic to help you easily deploy an IP-based communication solution on a converged network. PoE+ support can enable IP cameras and videophones to be easily added to your current network. Cisco offers a complete portfolio of IP telephony and other unified communications products designed for small businesses. Cisco Business 220 Series switches have been rigorously tested to help ensure easy integration and full compatibility with these and other vendor products.
Features

Management capability allows maximum efficiency and with unrestricted control
Lets you conveniently connect different networks to enable improved flexibility to your infrastructure
Effectively reduces downtime with improved network performance
Up to 10x faster than standard Ethernet server connectivity while providing high-performance uplinks
Layer 2 switch provides a complete lineup of features including IGMP snooping, port mirroring, and spanning tree
Supports optical fibre cable to span longer distances and provided high data transmission rates between servers and network components
Built-in power supply to ensure all components are being supplied with accurate voltage
Features 24 networking ports to meet the requirements of the most demanding workgroups
Specifications

Manageable: Yes
Layer Supported: 2
Expansion Slot Type: SFP+
Number of Total Expansion Slots: 4
Number of SFP+ Slots: 4
Network (RJ-45): Yes
Modular: Yes
Uplink Port: Yes
Total Number of Network Ports: 24
Port/Expansion Slot Details: 4 x 10 Gigabit Ethernet Expansion Slot, 24 x Gigabit Ethernet PoE+
Network Technology: 10/100/1000Base-T, 10GBase-X
Ethernet Technology: Gigabit Ethernet, 10 Gigabit Ethernet
Media Type Supported: Optical Fiber, Twisted Pair

30-port Lite Layer 3 Stackable Managed Gigabit PoE Switch

The DGS-3130 Series is a range of Lite Layer 3 Stackable Managed Switches designed to connect end-users in a secure enterprise or metro Ethernet access network. With multicast support and enhanced security, they form the ideal Gigabit access layer solution.

Designed For Secure Enterprise And Metro Ethernet Networks

Feature-Rich Unified Image

with powerful L2 and L3 features

6 Embedded 10G Ports

for super versatile network deployment

Scalable and Highly Available

with physical stacking and fault tolerant topologies

Key Features

16 x 100M/1/2.5GBASE-T PoE+ ports + 8 x 100M/1/2.5/5GBASE-T PoE++ ports
2 x 100M/1/2.5/5/10GBASE-T ports and 4 x 10/25G SFP28 ports provide all the uplink capacity your network needs
PoE budget of 740W allows powering of numerous external devices (Up to 960W with dual powers)
Premium L2 and L3 features effortlessly improve network efficiency and reduce unnecessary data transfer
RIP/RIPngand OSFPv2/v3 dynamically map out your network, aiding data to get to its destination via the fastest route possible
Expand capacity in a flash with physical stacking up to 9 units
Smart Fan self-adjusts accordingly to maintain optimal operating temperatures
Support ERPS, Q-in-Q and 6 KV surge protection
Support 60W PoE compliancewith IEEE 802.3bt
Perpetual PoE and Fast PoE support delivers faster and uninterrupted power to connected devices even when the switch is booting
Enhanced Network Reliability

The DGS-3130 Series targets enterprises and metro Ethernet applications, and customers who require a high level of network security and maximum uptime. Ethernet Ring Protection Switching (ERPS), low-latency ERPS recovery for high-speed metro Ethernet ring resilience, and Loopback Detection for network maintenance provide reliable network access for non-stop service.

Comprehensive Security

The DGS-3130 Series provides users with the latest security features such as Multi-layer and Packet Content Access Control Lists (ACL), Storm Control, and IP-MAC-Port Binding (IMPB) with DHCP Snooping. In addition, the DGS-3130 Series supports authentication mechanisms such as 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC) for strict access control and easy deployment.

Scalable Flexibility

The DGS-3130 Series allows multiple switches to be combined via two 10G RJ-45 and four 10G SFP+ ports to form a single physical or virtual stack to meet the needs of growing enterprises. This increases redundancy over multiple physical units and simplifies management by allowing all members in the stack to be managed using a single IP address.

Versatile Traffic Management

The DGS-3130 Series implements a rich set of multi-layer QoS/CoS features to ensure that critical network services such as VoIP, video conferences, IPTV, and IP surveillance are always given high priority. This optimizes network data, and video and voice transmissions to ensure that sensitive data is always transmitted quickly and reliably.

Aruba CX 6100 4-Port 4SFP+ Managed L3 Switch

Entry-level access switches ideal for branch offices, mid-market enterprises, and SMB networks looking for reliable and convenient access.


Features • Enterprise-class Layer 2 connectivity with support for ACLs, robust QoS and static routing

• Convenient built-in 1/10GbE uplinks and up to 370W of Class 4 PoE for support of IoT devices

• Compact and fanless 12 port model for quiet deployment

• Management flexibility with support for Aruba Central, easy-to-use Web GUI, CLI, and Aruba NetEdit

• Simple deployment with Zero Touch Provisioning

• Software defined ready with REST APIs

• Simplify adds, moves and changes with colourless ports




Why upgrade to CX 6100? Is your network ready to quickly and safely connect new devices? Can it handle new traffic loads? Is it smart enough to help IT more efficiently operate, manage, and secure the network? The next-gen, entry level Aruba CX switch series ensures you can deliver the digital experiences of the future.


The Aruba CX 6100 Switch Series is modern family of entry level access switches ideal for enterprise branch offices and SMB networks. Optimized for reliable, simple and secure access, the CX 6100 switches provide a convenient wired access solution for networks supporting IoT, mobile and cloud applications.

The CX 6100 series is based on the Aruba ASIC architecture with the programmable AOS-CX operating system used across the entire Aruba CX portfolio for a more consistent, more efficient operator experience. This fully managed layer 2 switch series has convenient built-in high speed uplinks with up to 370W of PoE to support IoT devices such as security cameras and wireless APs, and includes a compact and fanless model ideal for use in quiet work spaces.

The CX 6100 supports management choices that include Web GUI, CLI, cloud-based and on-premise Aruba Central, so you can choose the best fit for your needs today with flexibility to change without replacing hardware. With enhanced access security, traffic prioritization, and IPv6 support, the CX 6100 also simplifies ownership and brings peace of mind with no switch software licensing and a Limited Lifetime Warranty.




Ideal for branch offices, mid-market enterprises, and SMBs The CX 6100 access switches provide the performance, security, and simplicity that you need.



Simple, secure, and reliable

This Layer 2 switch series is ready for simple deployment with plenty of PoE for IoT, fast 10GbE uplinks, and robust security features like ACLs and static routing to help protect your network.

Power and speed for users and IoT

This Layer 2 switch series has convenient, built-in, high-speed uplinks with up to 370W of PoE to support IoT devices such as security cameras and wireless access points.

Cloud-based management

Built on a cloud-native microservices architecture, Aruba Central delivers full-service AI insights, security and unified infrastructure management for campus, branch, remote, and data center networks — all from a single pane of glass. It’s network configuration and operations made simple.

 


Entry-level, reliable, and secure wired access These access switches provide the performance, security, and simplicity that you need, making them ideal for branch offices, mid-market enterprises, and SMB networks.



Enterprise-class layer 2 connectivity

This high performance Layer 2 switch with support for ACLs, robust QoS, static routing, and IPv6 is ready to power your access layer.

PoE and High Speed Uplinks

Convenient built-in 1/10GbE uplinks and up to 370W of Class 4 PoE for support of IoT devices and wireless access points.

Management flexibility

The fully programmable CX 6100 series supports a choice of management, including cloud-based and on-prem Central*, CLI, switch Web GUI, and programmability with AOS-CX operating system and REST APIs.

Quiet and compact 12 port

This fanless 12-port model has four high-speed uplinks, and 139W of PoE to power access points and IoT devices.

 
Full specification and details can be found in the Product Datasheet PDF file

The HPE Aruba Networking CX 6200 Switch Series is a next-gen family of stackable access switches ideal for enterprise branch offices, campuses, and SMB networks. With a cloud-centric design that combines a fully programmable OS with the HPE Aruba Network Analytics Engine, the HPE Aruba Networking CX 6200 extends industry-leading monitoring and troubleshooting capabilities to the access layer. Support of Aruba NetEdit and the Aruba CX Mobile App verify that configurations are flawless and easy to deploy.

Make your network ready for tomorrow’s unpredictable demands with a powerful Aruba Gen7 ASIC architecture to deliver fast, non-blocking performance. Aruba Virtual Stacking Framework (VSF) allows for stacking of up to 8 switches, providing scale and simplified management. This series includes fixed (CX 6200F) and modular (CX 6200M) switches with built-in high speed uplinks and up to 1440W of PoE to support IoT devices such as security cameras and wireless APs.

Automation and Analytics

The HPE Aruba Networking CX 6200 Switch Series delivers unparalleled visibility with built-in analytics for real-time monitoring and troubleshooting to help fix problems faster. The Aruba Network Analytics Engine (NAE) automatically interrogates and analyzes events that can impact network health. Advanced telemetry and automation provide the ability to easily identify and troubleshoot network, system, application, and security related issues easily through the use of Python agents and REST APIs. The Time Series Database (TSDB) stores configuration and operational state data, making it available to quickly resolve network issues.

Aruba NetEdit introduces automation that allows for rapid network-wide changes, and ensures policy conformance post network updates. Intelligent capabilities include search, edit, validation (including conformance checking), deployment, and audit features. The Aruba CX Mobile App simplifies connecting, stacking, and managing HPE Aruba Networking CX 6200 switches. Switch information can be imported into Aruba NetEdit for simplified configuration management and to continuously validate the conformance of configurations anywhere in the network.

Performance and Power

The HPE Aruba Networking CX 6200 Switch Series uses a fully distributed architecture with Aruba Gen7 ASICs that delivers very low latency, increased packet buffering, and adaptive power consumption. All switching and routing are wire-speed to meet the demands of bandwidth-intensive applications. Aruba Virtual Switching Framework (VSF) allows you to quickly grow your network using high performance front-plane stacking. Create 8 member stacks using built-in SFP+ ports with flexibility to create stacks that span longer distances using long-range transceivers. Deploy wireless access points and IoT devices with HPE Aruba Networking CX 6200 models that support up to 1440W IEEE 802.3at Class 6 Power over Ethernet for up to 60W per port. Flexible, modular switch models support hot-swappable, redundant power supplies and fans for enhanced resiliency.

Smarter Segmentation

The HPE Aruba Networking CX 6200 Switch Series supports Aruba Dynamic Segmentation that automatically applies and enforces user, device, and application-aware policies on Aruba wired and wireless infrastructures. Automated device profiling, role-based access control, and Layer 7 firewall features deliver enhanced visibility and performance for a better overall experience for both IT and end-users alike. Switch-to-switch tunnels with VXLAN for low-latency and high performance use cases.

Specifications

Switch type: Managed
Switch layer: L3
Memory type: DDR4-SDRAM
Processor model: ARM Cortex-A72
Ports & interfaces

SFP+ module slots quantity: 4
Basic switching RJ-45 Ethernet ports quantity: 24
Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000)
Data transmission

Throughput: 95.2 Mpps
Latency (1 Gbps): 2.28 µs
Latency (10 Gbps): 1.46 µs
Switching capacity: 128 Gbit/s

GS2220 Layer 2+ Managed Switch Designed For Converged Networks Networked AV Now High quality, low latency video distribution is that simple

Industry first tri-mode switch The GS2220 Series is the first managed hybrid switch with Nebula Cloud management, Standalone management, and SNMP.

Powerful L2 features The GS2220 Series has a rich Layer 2 feature set that can shape the traffic for diverse VoIP, video conference and IPTV deployments. Advanced traffic control features of the GS2220 Series such as L2 multicast, IGMP snooping, Multicast VLAN Registration (MVR) provide hotels, businesses, and educational institutions greater agility and more effective traffic management for the converged applications of today.

Tailor-made experience for Networked AV An intuitive wizard that prompts for high level requirement for network infrastructure, follow up with AI-intelligent to apply all the necessary details to setup a professional AVoIP system. With the intuitive graphical status overview of the key AV network elements such as IGMP and IP information, accompany with condensed function menu help you manage and monitor the system with ease.

Manage it your way! The support of Zyxel NebulaFlex Pro allows you to easily switch standalone management and intuitive Nebula cloud management platform with 1-YEAR Pro Pack bundled anytime with just a few simple clicks.

Watch the demo below:

Watch Demo

Anytime, Anywhere with Nebula Mobile App Easy device onboarding: QR code scan


At a glance of network status


Remote control your network


Reboot AP, Camera by PoE power cycle


Block clients with unusual traffic


Power your devices with efficiency and energy-saving The PoE models support 802.3at to offer 30W per port along with maximum 375W high-power budget to meet the needs from power-hungry devices. The intelligent consumption mode allows delivery of only the actual power required by devices connected to the switch for better business ROI.

Experience whisper-silent operations This Series includes both fan-less and built-in smart fan models. The smart fan is designed to automatically adjust speed based on device temperature. You can barely hear the sound while the switch is operating.

Flexible port combination The GS2220 Series includes copper ports and combo ports, 50 and 50HP models even come with additional dedicated SFP ports for uplinks. This flexible port combination can fit in every Layer 2 switching applications easily.

Just Connect with Nebula Just connect with a single vendor Resellers, Managed Service Providers (MSPs) and network Administrators will find Simplicity, Scalability, Flexibility, reduced IT risk and reduced costs through Zyxel’s Cloud Networking Management platform, Nebula a single-vendor approach.

Just Connect without the complexity Nebula offers powerful, effortless and scalable network connectivity that works together to remove the complexity and security risks often associated with having a mixed vendor approach to networking.

Launch an entire network in minutes Connect, protect and manage Security, Switch, Wireless and LTE/5G connectivity via our centralized Cloud platform, Nebula.

Just Connect, with an unmatched portfolio Serving customers with over 80 Nebula enabled devices via an ever-growing portfolio, Zyxel is unmatched in its approach to onboarding new and existing products via NebulaFlex. From Deploying a home office to delivering connectivity to distributed network configurations, Zyxel’s Portfolio of Nebula enabled products can accommodate all types of budgets, functionality and scalability for now and for the future.

The Aruba CX 6300 Switch Series is a modern, flexible, and intelligent family of AOS-CX stackable switches ideal for enterprise access and aggregation. With a cloud-centric design that combines a fully programmable OS with the Aruba Network Analytics Engine, the Aruba CX 6300 extends industry-leading monitoring and troubleshooting capabilities to the access layer. Support of Aruba NetEdit and the Aruba CX Mobile App verify that configurations are flawless and easy to deploy.

A powerful Aruba Gen7 ASIC architecture delivers fast, non-blocking performance, meaning your network is ready for tomorrow’s unpredictable demands. Aruba Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management. This flexible series has built-in wirespeed 1/10/25/50GbE uplinks and supports high density IEEE 802.3bt high power PoE with HPE Smart Rate multi-gigabit Ethernet for high speed APs and IoT devices using existing cabling.

Features

Automation and Analytics

The Aruba CX 6300 Switch Series delivers unparalleled visibility with built-in analytics for real-time monitoring and troubleshooting to help fix problems faster. The Aruba Network Analytics Engine (NAE) automatically interrogates and analyzes events that can impact network health. Advanced telemetry and automation provide the ability to easily identify and troubleshoot network, system, application and security related issues easily, through the use of Python agents and REST APIs. The Time Series Database (TSDB) stores configuration and operational state data, making it available to quickly resolve network issues.

Performance and Power

The Aruba CX 6300 Switch Series uses a fully distributed architecture with Aruba Gen7 ASICs that deliver very low latency, increased packet buffering, and adaptive power consumption. All switching and routing are wire-speed to meet the demands of bandwidth-intensive applications. Aruba Virtual Switching Framework (VSF) allows you to quickly grow your network using high performance front plane stacking. Four built-in QSFP28 ports support speeds of 1GbE, 10GbE, 25GbE, and 50GbE for a total of up to 200 Gbps of stacking throughput per switch. Deploy wireless access points and IoT devices with Aruba CX 6300 models that offer high density HPE Smart Rate multi-gigabit Ethernet with 60W PoE on every port for a total of 2880W of PoE.

Smarter Segmentation

The Aruba CX 6300 Switch Series supports Aruba Dynamic Segmentation that automatically applies and enforces user, device, and application-aware policies on Aruba wired and wireless infrastructures. Automated device profiling, role-based access control, and Layer 7 firewall features deliver enhanced visibility and performance for a better overall experience for both IT and end-users alike. Switch-to-switch tunnels enable scalable multi-tenancy support with VXLAN to VRF mapping, while allowing policy application via user roles.

Specifications

Switch type: Managed
Switch layer: L3
Total Power over Ethernet (PoE) budget: 740 W
Power consumption (max): 67 W
Data transmission

Throughput: 334 Mpps
Latency (1 Gbps): 2.28 µs
Latency (10 Gbps): 1.46 µs
Switching capacity: 448 Gbit/s

Overview
Nebula Cloud-managed Layer 3 Enterprise Switch The XGS2220 Series is a family of Layer 3 access Switches that consists of six models, including PoE, Non PoE and Fiber options. Non PoE models offer Gigabit desktop ports for everyday network access; PoE models allow flexible options with larger PoE budgets and a mix of 60 W and 30 W ports to power devices like the latest WiFi 6/6E Wireless Access Points; The Fiber model aims to achieve business connectivity for high fiber port density requirement.

Flexible 10G For Converged Networking Applications On top of four 10G SFP+ uplinks, the XGS2220 Series comes with two additional 10G Multi-Gig RJ 45 ports to offer the flexibility to connect to servers, network storage, or other high speed network devices. Business can operate smoothly with the better extensibility and robust network infrastructure.

Multiple Power Budget options PoE models come with 10 ports of PoE++ (IEEE 802.3bt) offering up to 60 W per port and 16-40 ports of PoE+ (IEEE 802.3at) delivering up to 30 W per port to meet a variety of applications, including the latest generation of Wireless Access Points.

Within the range, the 3 PoE models of 30HP, 54HP and 54FP can offer larger Power budgets of 400 W, 600 W and 960 W respectively, allowing flexibility in powering a full range of PoE devices efficiently for applications like VoIP, surveillance, high density networked AV applications and Zyxel’s compressive WiFi 6/6E AP portfolio.

Nebula, Manage It Your Way! The support of NebulaFlex Pro allows you to easily switch management modes between standalone management and intuitive Nebula cloud managed mode with 1 YEAR Pro Pack bundled. Nebula provides both intuitive web interface and mobile App to deliver a streamlined experience for installation and management of your network, without additional cost for a software or hardware controller.

Anytime, Anywhere with Nebula Mobile App -Easy device onboarding: QR code scan

-At a glance of network status

-Remote control your network

-Reboot AP, Camera by PoE power cycle

-Block clients with unusual traffic

Dedicated Networked AV Mode The XGS2220 series includes a tailor-made networked AV mode when used in standalone mode. You can switch interfaces to simplify the installation of AVoIP with an intuitive wizard that prompts high level requirements for this type of network infrastructure; leveraging from AI intelligence, the switch is then able to remove the complexity by applying all the necessary details to set up a professional AVoIP deployment in minutes.

When deployed in Networked AV mode the switch gives you a dedicated dashboard allowing quick access to the key AV network elements such as IGMP and IP information as well as fast access to configuration functions often associated with AVoIP deployments.

The TL-SG3428X-M2 is a powerful JetStream Managed Switch featuring 24 ports at 2.5 Gbps speed and 4 lightning-fast 10 Gbps SFP+ slots. Integrated with Omada SDN for seamless centralized management and robust security features.

Features

2.5 Gbps Speeds: 24× 2.5 Gbps RJ45 ports offer high-speed and reliable connections to other switches and devices.
10G Lightning-Fast Uplink: 4× 10 Gbps SFP+ slots enable high-bandwidth connectivity and non-blocking switching capacity.
Integrated into Omada SDN: Zero-Touch Provisioning (ZTP)*, Centralized Cloud Management, and Intelligent Monitoring.
Centralized Management: Cloud access and Omada app for ultra convenience and easy management.
Static Routing: Helps route internal traffic for more efficient use of network resources.
Robust Security Strategies: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, Radius Authentication, and more.
Optimize Voice and Video Applications: L2/L3/L4 QoS and IGMP snooping.
Standalone Management: Web, CLI (Console Port, Telnet, SSH), SNMP, RMON, and Dual Image bring powerful management capabilities.
What's in the box

TL-SG3428X-M2 Switch
Power Cord
Quick Installation Guide
Rackmount Kit
Rubber Feet
Specifications

Interface: 24× 2.5 Gbps RJ45 Ports
4× 10G SFP+ Slots
1× RJ45 Console Port
1× Micro-USB Console Port

Fan Quantity: 1
Power Supply: 100-240 V AC~50/60 Hz
Dimensions: 17.3 × 7.1 × 1.7 in (440 × 180 × 44 mm)
Mounting: Rack Mountable
Power Consumption: 45.1 W (110V/60Hz)
Performance: Switching Capacity: 200 Gbps
Packet Forwarding Rate: 148.80 Mpps

Managed Features: Quality of Service
L3 Features
L2 and L2+ Features
L2 Multicast
Advanced Features
VLAN
Access Control List
Security
IPv6
MIBs

Management: Omada App
Centralized Management
Cloud Access
Zero-Touch Provisioning
Management Features

System Requirements: Microsoft® Windows® 98SE, NT, 2000, XP, Vista™ or Windows 7/8/10/11, MAC® OS, NetWare®, UNIX® or Linux.

The D-Link DGS-1250-28X 24-Port Gigabit Smart Managed Switch with 4 x 10G Uplinks is the latest generation of switches to provide increased high port density, multiple management interfaces, and advanced Layer 2 features. With all of these features combined, the DGS-1250-28X provides a cost-efficient and flexible solution for expanding any business network. 10G High-Bandwidth Connectivity

All models in the DGS-1250 Series feature four 10G SFP+ ports, allowing you to choose the most suitable media type for your requirement, to mitigate network bottlenecks. 24 1000BASE-T ports
4 10G SFP+ uplink ports
Layer 2 and Layer 3 Lite features
Industry standard full CLI1, web GUI, console port
Dual software images & Dual configuration files
D-Link Limited Lifetime Warranty
Layer 2 Features

Such as port mirroring, Spanning Tree Procol (STP), RSTP, MSTP, Link Aggregation. QoS & Surveillance Mode

Capabilities like 802.11p Quality of Service, Bandwidth Control, Auto-Voice VLAN, and Surveillance Mode. Layer 3 Lite Features

Including IP interfaces, IPv6 Neighbor Discovery (ND), and IPv4/IPv6 Static Routing. Security controls

Including ARP Spoofing Prevention, port security - up to 64 MAC addresses per port, IMP-Binding, and D-Link Safeguard Engine. Management interfaces

Dedicated RJ-45 console port. Full CLI1, multilingual web GUI, SNMP MIB for remote NMS (D-View 7). Dual configuration files and dual software images Limited Lifetime Warranty & Next Day Service

Register to enjoy D-Link Limited Lifetime Warranty support, with complimentary next business day advance replacement service included. 10-Gigabit Ethernet port

Four 10G SFP+ uplink ports. Backwards compatibility with RJ-45 ports. Leading the way with affordable 10 Gigabit connectivity. Deploy the most cost-effective 10G solution as core switches for SMBs and as access switches for Enterprises. Designed with a high port density, high-bandwidth ports to remove bottlenecks, a high PoE power budget for larger deployments, redundancy capabilities to maintain uptime, easy-to-use multilingual web UI management, dedicated console port and full CLI control.

DGS-1250-28X
24 x 10/100/1000BASE-T
4 x 10G SFP+ ports
128 GBps switching capacity

 

Easier maintenance, less downtime. Support for STP, RSTP, and MSTP provides redundant links, prevents network loops, increases network reliability and minimises downtime for essential applications. These switches can even withstand temperatures between -5 to 50°C. Dual software images and configuration files allow the switch to quickly change between firmware versions and configurations to minimise downtime 10G connections Each switch in the series has four 10G SFP+ ports, which allows the most suitable media type to be chosen and mitigates network bottlenecks. The flexible uplink connections in both 1G/10G speeds deliver on data-intensive tasks.  

Optimised for Video Surveillance D-Link’s exclusive Surveillance Mode provides a Web UI designed for video surveillance: it gives you an instant snapshot of your topology, makes features easy to access, and simplifies management of your surveillance network. Layer 3 Lite Including IP interfaces, IPv6 Neighbor Discovery (ND), ARP-Snooping Prevention, IGMP and MLD Snooping, LLDP and LLDP-MED. The DGS-1250 series also includes IPv4/IPv6 static routing capabilities for a scalable and more efficient network. QoS The series supports 802.11p Quality of Service to deliver data to devices based on the priority and type of traffic, and bandwidth Control to reduce unwanted network broadcast traffic. And the Auto-Voice and Auto-Surveillance VLAN features allow voice and video traffic to be automatically identified and prioritised.  

Security down to the port level. The D-Link Safeguard Engine helps protect against malicious traffic flooding the network in the event of a malicious attack. The series supports IMP-Binding which is an easy method to control nodes during IP conflicts and auditing issues, and it prevents ‘ARP spoofing’ and 'man-in-the-middle' malicious attacks.

Network security is further reinforced with ARP Inspection, DHCP Snooping, and a host of security and authentication features such as 802.1X port-based authentication, port security for 64 MAC addresses per port. The series also includes network protection functionalities like Access Control List, and DHCP Server Screening that only allows legitimate DHCP Server IP addresses on specific ports.

Network management options to suit your business. The DGS-1250 series comes with the intuitive D-Link Network Assistant (DNA) utility for which simplifies the discovery of all devices using the D-Link Discovery Protocol within the same L2 network segment and displays them on screen for instant access. Simultaneous configurations and basic setups of all discovered devices, including password changes and firmware upgrades, can then be done easily.

The series can also be managed through the web-GUI that has 11 selectable languages, or the free, SNMP-supported D-View 7. Each switch includes a dedicated console port, and the full CLI1 provides more control, precision and repeatability.



1 Full CLI support available at end 2019 via firmware update.

Product overview

From connectivity to cloud applications, networking plays a crucial role in every business journey. Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources.

Cisco Business is a portfolio of affordable wireless access points, switches, and routers designed and built for Small Business. Managed through Cisco Business Dashboard and mobile app, the portfolio provides a simple and reliable experience. Cisco Business Dashboard simplifies traditional challenges in deploying and managing business networks by automating the deployment, monitoring, and lifecycle management of the network.

Cisco Business 220 Series Smart Switches

The Cisco Business 220 Series are affordable smart switches with ease of use, security, and reliability for business-class networks. With intuitive dashboard, Power over Ethernet (PoE) options, and customizable features, these switches deliver a solid business network within your budget parameters. When you need a business-class network and cost is top priority, Cisco Business 220 Series provides an excellent solution.

Prominent feature | Business Applications

With Cisco Business 220 Series switches, you can not only build an efficient and reliable network to connect the workforce, you can also create advanced solutions to deliver data, voice, and video services on a converged infrastructure. Get the best value for your money by improving the productivity of employees. Possible deployment scenarios include:

Small office networking: The versatility and affordability of the Cisco Business 220 Series family of switches provide an ideal business-class networking foundation for small businesses with limited IT support and budget.
Wireless connectivity: With PoE+ support, and comprehensive security and Quality of Service (QoS) capabilities, Cisco Business 220 Series switches provide a solid foundation to add business-grade wireless to the network. You can easily deploy Cisco Business wireless access points to increase workforce productivity without worrying about power and throughput.
Unified communications: The Cisco Business 220 Series switches provide QoS features to automatically prioritize delay-sensitive traffic to help you easily deploy an IP-based communication solution on a converged network. PoE+ support can enable IP cameras and videophones to be easily added to your current network. Cisco offers a complete portfolio of IP telephony and other unified communications products designed for small businesses. Cisco Business 220 Series switches have been rigorously tested to help ensure easy integration and full compatibility with these and other vendor products.
Features

Management capability allows maximum efficiency and with unrestricted control
Lets you conveniently connect different networks to enable improved flexibility to your infrastructure
Effectively reduces downtime with improved network performance
Up to 10x faster than standard Ethernet server connectivity while providing high-performance uplinks
Layer 2 switch provides a complete lineup of features including IGMP snooping, port mirroring, and spanning tree
Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters
Built-in power supply to ensure all components are being supplied with accurate voltage
Features 24 networking ports to meet the requirements of the most demanding workgroups
Specifications

Manageable: Yes
Layer Supported: 2
Expansion Slot Type: SFP+
Number of Total Expansion Slots: 4
Number of SFP+ Slots: 4
Network (RJ-45): Yes
Modular: Yes
Uplink Port: Yes
Total Number of Network Ports: 24
Port/Expansion Slot Details: 24 x Gigabit Ethernet Network, 4 x 10 Gigabit Ethernet Expansion Slot
Network Technology: 10/100/1000Base-T, 1000Base-X
Ethernet Technology: Gigabit Ethernet
Media Type Supported: Optical Fiber, Twisted Pair

D-Link’s DGS-1210-28 is a 24 Port Gigabit Smart+ Switch with 4 Fibre Uplinks which integrates advanced management as well as security functions that provide performance and scalability. Management options for the switch include SNMP, Web Management, D-Link Network Assistant Utility and compact command lines. The DGS-1210 Series uses Auto Voice VLAN, ensuring bandwidth is prioritised for a smoother voice performance. The DGS-1210-28 features a fanless design that allows for quieter operation and helps to extend the device’s lifetime.



DGS-1210-28: 24 x 1000GBase-T 4 x 1GbE SFP
Fanless

Energy saving DGS-1210 switch is capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1210 switch offers advanced power-saving settings including port shutoff and standby, LED shutoff, and system hibernation based on custom scheduling profiles. The profiles can also be applied to the PoE switch so that there is no unnecessary power consumption during off hours. The DGS-1210 series switch can also detect the length of connected cables to automatically reduce power usage on shorter cable connections.



Auto Surveillance VLAN and Voice VLAN The process of setting up IP surveillance and VoIP on a network is automated with the D-Link Smart switch. Auto Surveillance VLAN (ASV) consolidates data and surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities. ASV also protects the quality of real-time video by grouping IP surveillance devices on a single high priority VLAN. This ensures that surveillance video streams will not be affected when ordinary data traffic is at their high levels. Similarly, the Auto Voice VLAN guarantees clear audio quality and efficient transmission for all voice communication.


Exclusive Layer 2 features Equipped with a complete lineup of L2 features, the DGS-1210 series switch includes IGMP Snooping, Port Mirroring, Spanning Tree, and Link Aggregation Control Protocol (LACP). The IEEE 802.3x flow control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps full duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include loopback detection and cable diagnostics. Loopback detection is used to detect loops created by a specific port and automatically shut down the affected port. The cable diagnostic feature is designed primarily for administrators and customer service representatives, and can rapidly discover the type of error and determine the cable quality.


Secure your network D-Link's safeguard engine protects the switch against traffic flooding caused by virus attacks. The switch also supports 802.1x port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and protects the network by screening traffic from illegal MAC or IP addresses. ARP spoofing prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source. This protects important data from being stolen by man-in-the-middle attacks, and prevents wasting CPU cycles on these packets. For added security, the DHCP server screening feature blocks rogue DHCP server packets from user ports to prevent unauthorized IP assignment.


DGS-1210-24 DGS-1210-24P DGS-1210-28 DGS-1210-28P DGS-1210-28MP Form Factor Rackmount Rackmount Rackmount Rackmount Rackmount Switching Capacity 56 Gbps 56 Gbps 56 Gbps 56 Gbps 56 Gbps 100M/1G Copper  (RJ-45) Ports 24 24 24 24 24 1G SFP Fibre Ports 4 4 4 4 4 PoE/PoE+ Ports N/A 12 N/A 24 24 PoE Standard N/A 802.3af/ 802.3at  N/A 802.3af/ 802.3at  802.3at PoE Budget N/A 85 W N/A 193 W 370 W PoE Capable Ports N/A Ports 1 to 12: Up to 30 W N/A Ports 1 to 4: 802.3at. 
Ports 5 to 24: 802.3af Ports 1 to 24: Up to 30 W Dimensions 441 x 209.9 x 44 mm 441 x 209.9 x 44 mm 440 x 140 x 44 mm 444 x 210 x 44 mm 440 x 250 x 44 mm

With increased PoE output and advanced Layer 2 management and security features, D?Link’s DGS?1210 Smart Managed Gigabit Switches provide a cost?efficient and flexible solution for expanding any business network.

Advanced Layer 2 Management
The DGS-1210 Smart family features advanced network management accessible via the Web-based UI that equip your business with network capabilities such as VLANs, Spanning Tree Protocol (STP), link aggregation, and dual configuration files.

With powerful security features including IGMP snooping, access control lists, and port security the DGS-1210 Smart family is a versatile solution for access-edge network environments.

Fibre Uplinks
Use fibre uplinks to connect across longer distances, like factory lines and university campuses, using lightweight, secure, and energy?efficient fibre optic cabling that’s immune to interference and which has access to higher throughput to protect the future demands of your business network.

PoE and PoE+, with budgets up to 193W
The DGS-1210 Smart Series includes a range of PoE-enabled switches for business looking to power VoIP phones, wireless access points or network cameras.

Free Network Design and Management Software
D-Link’s free Network Assistant (DNA) displays all connected devices and speeds up the first time configuration. The free D-View 7 Network Management System comes with a license for 25 nodes and 2 probes and full access to the management tools. Optional upgrade licenses allow you to broaden your network and analysis.

Smart Energy?Saving Design
D-Link Green technology enables the DGS-1210 Smart series to save power without any sacrifices. The majority of the family utilises a fanless design, helping reduce energy usage.

Surveillance Mode
Select Surveillance Mode in the Web UI to take advantage of easy?to?use surveillance features which also enable you to manage your surveillance network effortlessly. It automatically detects your security devices and segments them into a dedicated Auto Surveillance VLAN to handle video surveillance traffic securely and efficiently.

D-Link DGS-1210-24P Gigabit Smart Switch with Fibre Uplinks is the latest generation of D-Link Smart Switches featuring D-Link Green 3.0 technology. offering a high level of energy saving and efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv6 management and configurations ensure your network remains protected after the upgrade from IPv4 to IPv61. By offering multiple management options, the Smart Switches allows quick deployment, infrastructure expansion, and seamless function upgrades. Built for small and medium-sized businesses, the DGS-1210-24P Smart Switch provides functionality, security and manageability for a fraction of the standard cost of ownership.

The DGS-1210-24P is an affordable PoE-enabled switch for businesses looking to power VoIP phones, wireless access points or network cameras. The DGS-1210-24P is a 24-port Smart PoE Switch that provides 24 PoE-enabled ports that can support up to 30 W of power output following IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs.

Features:

Easily manage your entire network with the Web GUI or D-Link Network Assistant using features like automatic switch discovery, batch operations, and more
Innovative Safeguard Engine, ACL, and ARP Spoofing Prevention protect your network from malicious attacks and illegal access
Range of D-Link Green Technology features help save energy usage automatically and reduce costs, without sacrificing performance


DGS-1210-24P:

24 x 1000Base-T / 802.3af PoE

4 x 1GbE SFP


193W PoE budget


Energy saving DGS-1210 switch is capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1210 switch offers advanced power-saving settings including port shutoff and standby, LED shutoff, and system hibernation based on custom scheduling profiles. The profiles can also be applied to the PoE switch so that there is no unnecessary power consumption during off hours. The DGS-1210 series switch can also detect the length of connected cables to automatically reduce power usage on shorter cable connections.



Auto Surveillance VLAN and Voice VLAN The process of setting up IP surveillance and VoIP on a network is automated with the D-Link Smart switch. Auto Surveillance VLAN (ASV) consolidates data and surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities. ASV also protects the quality of real-time video by grouping IP surveillance devices on a single high priority VLAN. This ensures that surveillance video streams will not be affected when ordinary data traffic is at their high levels. Similarly, the Auto Voice VLAN guarantees clear audio quality and efficient transmission for all voice communication.


Exclusive Layer 2 features Equipped with a complete lineup of L2 features, the DGS-1210 series switch includes IGMP Snooping, Port Mirroring, Spanning Tree, and Link Aggregation Control Protocol (LACP). The IEEE 802.3x flow control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps full duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include loopback detection and cable diagnostics. Loopback detection is used to detect loops created by a specific port and automatically shut down the affected port. The cable diagnostic feature is designed primarily for administrators and customer service representatives, and can rapidly discover the type of error and determine the cable quality.


Secure your network D-Link's safeguard engine protects the switch against traffic flooding caused by virus attacks. The switch also supports 802.1x port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and protects the network by screening traffic from illegal MAC or IP addresses. ARP spoofing prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source. This protects important data from being stolen by man-in-the-middle attacks, and prevents wasting CPU cycles on these packets. For added security, the DHCP server screening feature blocks rogue DHCP server packets from user ports to prevent unauthorized IP assignment.






DGS-1210-24 DGS-1210-24P DGS-1210-28 DGS-1210-28P DGS-1210-28MP Form Factor Rackmount Rackmount Rackmount Rackmount Rackmount Switching Capacity 56 Gbps 56 Gbps 56 Gbps 56 Gbps 56 Gbps 100M/1G Copper  (RJ-45) Ports 24 24 24 24 24 1G SFP Fibre Ports 4 4 4 4 4 PoE/PoE+ Ports N/A 24 N/A 24 24 PoE Standard N/A 802.3af/ 802.3at  N/A 802.3af/ 802.3at  802.3at PoE Budget N/A 193 W N/A 193 W 370 W PoE Capable Ports N/A Ports 1 to 24: Up to 30 W
(Max 193 W) N/A Ports 1 to 4: 802.3at. 
Ports 5 to 24: 802.3af Ports 1 to 24: Up to 30 W Dimensions 441 x 209.9 x 44 mm 441 x 209.9 x 44 mm 440 x 140 x 44 mm 444 x 210 x 44 mm 440 x 250 x 44 mm

D-Link’s DGS-1210-28P Gigabit PoE Smart+ Switch with 4 Fibre Uplinks integrates advanced management as well as security functions that provide performance and scalability. Management options for the switch include SNMP, Web Management, D-Link Network Assistant Utility,

The DGS-1210-28P uses Auto Voice VLAN, ensuring bandwidth is prioritised for a smoother voice performance. The DGS-1210-28P features a smart fan design that powers on after the switch reaches a certain temperature, saving energy and cutting costs without sacrificing performance.

The DGS-1210-28P is a high power budget PoE-enabled switch for businesses looking to power VoIP phones, wireless access points or network cameras. The DGS- 1210-28P is a Smart PoE+ switch with power budgets of 193W that provides 24 PoE-enabled ports with 4 ports that support up to 30W of power output following IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs.

DGS-1210-28P: 20 x 1000Base-T 802.3af PoE 4 x 1000Base-T 802.3at PoE 4 x 1GbE SFP 193W PoE budget Green Technology

Power saving via the following features: Link Status detection
LED Shut-Off
Port Shut-Off
System Hibernation
Time-based PoE

Security Features
Access Control List secures network
D-Link Safeguard Engine protects CPU from Broadcast/Multicast/Unicast Flooding
Port Security supports 64 MACs per port
ARP Spoofing Prevention
Intuitive Management
D-Link Network Assistant Utility or Web-based GUI
Built-in SNMP MIB for remote NMS (D-View 6.0)
Compact CLI through Telnet
Advanced Features
Auto Surveillance VLAN
Loopback Detection automatically disables a port when a loop is detected
Cable Diagnostics allows administrators to determine cable status
SFP ports for flexibility
Auto MDI/MDIX
Energy saving DGS-1210 switch is capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1210 switch offers advanced power-saving settings including port shutoff and standby, LED shutoff, and system hibernation based on custom scheduling profiles. The profiles can also be applied to the PoE switch so that there is no unnecessary power consumption during off hours. The DGS-1210 series switch can also detect the length of connected cables to automatically reduce power usage on shorter cable connections.


Auto Surveillance VLAN and Voice VLAN The process of setting up IP surveillance and VoIP on a network is automated with the D-Link Smart switch. Auto Surveillance VLAN (ASV) consolidates data and surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities. ASV also protects the quality of real-time video by grouping IP surveillance devices on a single high priority VLAN. This ensures that surveillance video streams will not be affected when ordinary data traffic is at their high levels. Similarly, the Auto Voice VLAN guarantees clear audio quality and efficient transmission for all voice communication.


Exclusive Layer 2 features Equipped with a complete lineup of L2 features, the DGS-1210 series switch includes IGMP Snooping, Port Mirroring, Spanning Tree, and Link Aggregation Control Protocol (LACP). The IEEE 802.3x flow control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps full duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include loopback detection and cable diagnostics. Loopback detection is used to detect loops created by a specific port and automatically shut down the affected port. The cable diagnostic feature is designed primarily for administrators and customer service representatives, and can rapidly discover the type of error and determine the cable quality.


Secure your network D-Link's safeguard engine protects the switch against traffic flooding caused by virus attacks. The switch also supports 802.1x port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and protects the network by screening traffic from illegal MAC or IP addresses. ARP spoofing prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source. This protects important data from being stolen by man-in-the-middle attacks, and prevents wasting CPU cycles on these packets. For added security, the DHCP server screening feature blocks rogue DHCP server packets from user ports to prevent unauthorised IP assignment.


DGS-1210-24 DGS-1210-24P DGS-1210-28 DGS-1210-28P DGS-1210-28MP Form Factor Rackmount Rackmount Rackmount Rackmount Rackmount Switching Capacity 56 Gbps 56 Gbps 56 Gbps 56 Gbps 56 Gbps 100M/1G Copper  (RJ-45) Ports 24 24 24 24 24 1G SFP Fibre Ports 4 4 4 4 4 PoE/PoE+ Ports N/A 12 N/A 24 24 PoE Standard N/A 802.3af/ 802.3at  N/A 802.3af/ 802.3at  802.3at PoE Budget N/A 85 W N/A 193 W 370 W PoE Capable Ports N/A Ports 1 to 12: Up to 30 W N/A Ports 1 to 4: 802.3at. 
Ports 5 to 24: 802.3af Ports 1 to 24: Up to 30 W Dimensions 441 x 209.9 x 44 mm 441 x 209.9 x 44 mm 440 x 140 x 44 mm 444 x 210 x 44 mm 440 x 250 x 44 mm

The DGS-1510-28X is the next generation of SmartPro switch. It contains 24 10/100/1000 Mbps ports plus 4 10G SFP+ ports.With its 10G SFP+ ports, the DGS-1510-28X is ideal for deployments in the SME/SMB core with its 10G uplinks connecting with servers equipped with 10G port connectivity. For medium to large scale enterprise deployment, it can serve as a good interconnection between the core switch and edge switch Features:

24 10/100/1000 Mbps Ports
Four 10G SFP+ stacking/uplink ports
Extensive Layer 2 features
QoS, bandwidth control
Secure your network
IPv6 ready
Versatile management
Layer 3 traffic management
Energy saving

DGS-1510-28X: 24 x 1000Base-T 4 x 10GbE SFP+
Smart Fan Featuring D-Link Green 3.0 technology, the DGS-1510 series offers a high level of energy saving and efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv6 management and configurations ensures your network remains protected after the upgrade from IPv4 to IPv6. By offering multiple management options, the DGS-1510 Series allows quick deployment, infrastructure expansion, and seamless function upgrades. Built for small and medium-sized businesses, the DGS-1510 Series provide functionality, security, and manageability for a fraction of the standard cost of ownership. 

Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. 6 units or 288 Gigabit ports can be configured for a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix any models from the DGS-1510 SmartPro series in a single stack to allow simultaneous and easy configuration, management and troubleshooting. 

DGS-1510 series supports virtual stacking via D-Link's Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP. This simplifies management of small workgroups or wiring closets while allowing the network to be scaled to handle increased bandwidth demand. SIM not only reduces the number of IP address needed in your network but also allow switches to be stacked together over Ethernet instead of using physical uplink or stacking ports. This eliminates the need for any specialised stacking cables while at the same time removing the distance barriers that typically limit your topology options when using other stacking technology. 

These switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN and automatically shut down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators and customer service representatives, can quickly discover the type of error on cables and determine the cable quality.

The DGS-1510 Series supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited to VoIP and video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches.

Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Six units or 288 Gigabit ports can be configured as a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 series with cost efficiency. Users can mix from any of the DGS-1510 SmartPro series in a single stack to allow simultaneous and easy configuration, management and troubleshooting. 

Flexibility and scalability

The DGS-1510 series supports virtual stacking via D-Link's Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP. This simplifies management of small workgroups or wiring closets while allowing the network to be scaled to handle increased bandwidth demand. SIM reduces the number of IP address needed in the network and allows switches to be stacked together over Ethernet instead of using physical uplink or stacking ports. This eliminates the need for specialised stacking cables and removes distance barriers that can limit topology options when using other stacking technology. 


Extensive Layer 2 features

The DGS-1510 series switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN and automatically shut down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators and customer service representatives, can quickly discover the type of error on cables and determine the cable quality. 


QoS, bandwidth control

The DGS-1510 series supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited for VoIP and video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches. This technology consolidates data and surveillance video transmission through a single SmartPro switch, sparing businesses the expense of maintaining expensive dedicated hardware and facilities. ASV also ensures the quality of real-time video for monitoring and control without compromising the transmission of conventional network data. The Auto Voice VLAN technology enhances VoIP service by automatically placing voice traffic from an IP phone to an assigned VLAN. With higher priority and an individual VLAN, these features guarantee the quality and security of VoIP traffic. Furthermore, the DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic. As a result, these voice and video packets take precedence over other packets. In addition, with Bandwidth Control, network administrators can reserve bandwidth for important functions that require more bandwidth or might require high priority. 


Secure your network

D-Link's innovative safeguard engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and helps to protect the internal IT network by screening ingress traffic based on MAC or IP addresses. The DGS-1510 series includes ARP Spoofing Prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages to the network. To prevent ARP Spoofing attacks, the switch uses Packet Control ACLs to block invalid packets that contain fake ARP messages. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorised IP assignment. 


IPv6 ready

The DGS-1510 series is IPv6 ready and supports various IPv6 functions such as MLD Snooping, IPv6 ACL/QoS, and IMPBv6 to ensure seamless integration of next generation networks. The DGS-1510 series also supports a IPv4/v6 dual stack function that allows the switch to act as a bridge between IPv4 and IPv6 networks. Finally, all DGS-1510 series are certified to be IPv6 Ready Logo Phase 2, which guarantees interoperability for IPv6 environments. 


Versatile management

The DGS-1510 series provides a D-Link Network Assistant Utility and a web based management interface that enables administrators to remotely control their network down to the port level. The D-Link Network Assistant Utility allows customers to easily discover multiple D-Link SmartPro Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC. It also simplifies the initial setup of the SmartPro Switches. Switches within the same L2 network segment that are connected to the user's PC are displayed on screen for instant access. This allows extensive switch configuration and basic setup of discovered devices including password changes and firmware upgrades. The DGS-1510 Series also supports D-View 6.0 and a fully featured Command Line Interface (CLI) via dedicated out-of-band console port. D-View 6.0 is a Network Management System that allows for the central management of critical network characteristics such as availability, reliability, resilience, and security. CLI management of the switches is possible via console port and Telnet interfaces. This makes it possible to adjust basic settings, passwords, configuration files, and firmware with ease. 


Layer 3 traffic management

The DGS-1510 series supports advanced traffic management features, including static routing. In static routing, IP routes are manually entered into a routing table, which allows for communication between different user groups in different VLAN segments in a network. The switch can directly handle inter VLAN routing using multiple interfaces, making the network run faster and more efficiently. Because the switches can manage internal routing, the network router can be assigned to handle external traffic routing only. 


Energy saving

DGS-1510 switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the 802.3az Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1510 switches offer advanced power-saving settings including port shutoff, LED shutoff, and system hibernation based on custom scheduling profiles.


 



DGS-1510-20 DGS-1510-28 DGS-1510-28X DGS-1510-28P DGS-1510-28XMP Form Factor Rackmount Rackmount Rackmount Rackmount Rackmount Switching Capacity 76 Gbps 92 Gbps 128 Gbps 92 Gbps 128 Gbps 100M/1G Copper  (RJ-45) Ports 16 24 24 24 24 1G/10G SFP/SFP+ Fibre Ports 2/2 2/2 0/4 2/2 0/4 PoE/PoE+ Ports N/A N/A N/A 24 24 PoE Standard N/A N/A N/A  802.3at  802.3at PoE Budget N/A N/A N/A 193 W 370 W PoE Capable Ports N/A N/A N/A Ports 1 to 24: Up to 30 W Ports 1 to 24: Up to 30 W Dimensions 280 x 180 x 44 mm 440 x 210 x 44 mm 440 x 210 x 44 mm 444 x 210 x 44 mm 440 x 308 x 44 mm  

D-Link’s DGS-1210-28MP Gigabit PoE Smart+ Switch with 4 Fibre Uplinks integrates advanced management as well as security functions that provide performance and scalability. Management options for the switch include SNMP, Web Management, D-Link Network Assistant Utility,

The DGS-1210-28MP uses Auto Voice VLAN, ensuring bandwidth is prioritised for a smoother voice performance. The DGS-1210-28MP features a smart fan design that powers on after the switch reaches a certain temperature, saving energy and cutting costs without sacrificing performance.

The DGS-1210-28MP is a high power budget PoE-enabled switch for businesses looking to power VoIP phones, wireless access points or network cameras. The DGS- 1210-28MP is a Smart PoE+ switch with power budgets of 370W that provides 24 PoE-enabled ports that support up to 30W of power output following IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs.

DGS-1210-28MP: 24 x 1000Base-T 802.3at PoE 4 x 1GbE SFP 370W PoE budget Green Technology

Power saving via the following features: Link Status detection
LED Shut-Off
Port Shut-Off
System Hibernation
Time-based PoE

Security Features
Access Control List secures network
D-Link Safeguard Engine protects CPU from Broadcast/Multicast/Unicast Flooding
Port Security supports 64 MACs per port
ARP Spoofing Prevention
Intuitive Management
D-Link Network Assistant Utility or Web-based GUI
Built-in SNMP MIB for remote NMS (D-View 6.0)
Compact CLI through Telnet
Advanced Features
Auto Surveillance VLAN
Loopback Detection automatically disables a port when a loop is detected
Cable Diagnostics allows administrators to determine cable status
SFP ports for flexibility
Auto MDI/MDIX
Energy saving DGS-1210 switch is capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1210 switch offers advanced power-saving settings including port shutoff and standby, LED shutoff, and system hibernation based on custom scheduling profiles. The profiles can also be applied to the PoE switch so that there is no unnecessary power consumption during off hours. The DGS-1210 series switch can also detect the length of connected cables to automatically reduce power usage on shorter cable connections.


Auto Surveillance VLAN and Voice VLAN The process of setting up IP surveillance and VoIP on a network is automated with the D-Link Smart switch. Auto Surveillance VLAN (ASV) consolidates data and surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities. ASV also protects the quality of real-time video by grouping IP surveillance devices on a single high priority VLAN. This ensures that surveillance video streams will not be affected when ordinary data traffic is at their high levels. Similarly, the Auto Voice VLAN guarantees clear audio quality and efficient transmission for all voice communication.


Exclusive Layer 2 features Equipped with a complete lineup of L2 features, the DGS-1210 series switch includes IGMP Snooping, Port Mirroring, Spanning Tree, and Link Aggregation Control Protocol (LACP). The IEEE 802.3x flow control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps full duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include loopback detection and cable diagnostics. Loopback detection is used to detect loops created by a specific port and automatically shut down the affected port. The cable diagnostic feature is designed primarily for administrators and customer service representatives, and can rapidly discover the type of error and determine the cable quality.


Secure your network D-Link's safeguard engine protects the switch against traffic flooding caused by virus attacks. The switch also supports 802.1x port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and protects the network by screening traffic from illegal MAC or IP addresses. ARP spoofing prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source. This protects important data from being stolen by man-in-the-middle attacks, and prevents wasting CPU cycles on these packets. For added security, the DHCP server screening feature blocks rogue DHCP server packets from user ports to prevent unauthorised IP assignment.


DGS-1210-24 DGS-1210-24P DGS-1210-28 DGS-1210-28P DGS-1210-28MP Form Factor Rackmount Rackmount Rackmount Rackmount Rackmount Switching Capacity 56 Gbps 56 Gbps 56 Gbps 56 Gbps 56 Gbps 100M/1G Copper  (RJ-45) Ports 24 24 24 24 24 1G SFP Fibre Ports 4 4 4 4 4 PoE/PoE+ Ports N/A 12 N/A 24 24 PoE Standard N/A 802.3af/ 802.3at  N/A 802.3af/ 802.3at  802.3at PoE Budget N/A 85 W N/A 193 W 370 W PoE Capable Ports N/A Ports 1 to 12: Up to 30 W N/A Ports 1 to 4: 802.3at. 
Ports 5 to 24: 802.3af Ports 1 to 24: Up to 30 W Dimensions 441 x 209.9 x 44 mm 441 x 209.9 x 44 mm 440 x 140 x 44 mm 444 x 210 x 44 mm 440 x 250 x 44 mm

The DGS-1510-28P s the next generation of SmartPro switch. It contains 24 10/100/1000 Mbps PoE plus 2 Gigabit SFP ports and 2x 10G ports. With its 10G SFP+ ports, the DGS-1510-28P is ideal for deployments in the SME/SMB core with its 10G uplinks connecting with servers equipped with 10G port connectivity. For medium to large scale enterprise deployment, it can serve as a good interconnection between the core switch and edge switch.

The DGS-1510-28P Gigabit Stackable SmartPro Switches with 10G Uplinks is PoE-enabled for businesses looking to power VoIP phones, wireless access points or network cameras. The DGS-1510-28P is a 24-port PoE Switch that provides 24 PoE-enabled ports that can support up to 30 W of power output following the IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs. 

Features:

24 10/100/1000 Mbps PoE+ Ports
Two 10G SFP+ stacking/uplink ports
Two Gigabit SFP Ports
PoE Power Budget - Up to 193W
Extensive Layer 2 features
QoS, bandwidth control
Secure your network
IPv6 ready
Versatile management
Layer 3 traffic management
Energy saving
The DGS-1510-28P's 10/100/1000 Mbps ports are PoE-enabled for powering devices such as IP cameras, VoIP phones and wireless access points. Compliant with 802.3af and 802.3at, the DGS-1510-28P supports up to 30W of power output on any particular PoE port up to 193W, providing flexibility in power allocation for a variety of powered devices, including new 802.11ac wireless access points that require 802.3at power for full functionality. Time based PoE enables power to a port to be shut off at a scheduled time, reducing power usage and increasing security by powering off devices that should not be in use during non-business hours.

DGS-1510-28P: 24 x 1000Base-T 802.3at PoE 2 x 1GbE SFP 2 x 10GbE SFP+ 193W PoE budget
2 x Smart fans Featuring D-Link Green 3.0 technology, the DGS-1510 series offers a high level of energy saving and efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv6 management and configurations ensures your network remains protected after the upgrade from IPv4 to IPv6. By offering multiple management options, the DGS-1510 Series allows quick deployment, infrastructure expansion, and seamless function upgrades. Built for small and medium-sized businesses, the DGS-1510 Series provide functionality, security, and manageability for a fraction of the standard cost of ownership. 

Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. 6 units or 288 Gigabit ports can be configured for a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix any models from the DGS-1510 SmartPro series in a single stack to allow simultaneous and easy configuration, management and troubleshooting. 

DGS-1510 series supports virtual stacking via D-Link's Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP. This simplifies management of small workgroups or wiring closets while allowing the network to be scaled to handle increased bandwidth demand. SIM not only reduces the number of IP address needed in your network but also allow switches to be stacked together over Ethernet instead of using physical uplink or stacking ports. This eliminates the need for any specialised stacking cables while at the same time removing the distance barriers that typically limit your topology options when using other stacking technology. 

These switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN and automatically shut down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators and customer service representatives, can quickly discover the type of error on cables and determine the cable quality.

The DGS-1510 Series supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited to VoIP and video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches.

Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Six units or 288 Gigabit ports can be configured as a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 series with cost efficiency. Users can mix from any of the DGS-1510 SmartPro series in a single stack to allow simultaneous and easy configuration, management and troubleshooting. 

Flexibility and scalability

The DGS-1510 series supports virtual stacking via D-Link's Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP. This simplifies management of small workgroups or wiring closets while allowing the network to be scaled to handle increased bandwidth demand. SIM reduces the number of IP address needed in the network and allows switches to be stacked together over Ethernet instead of using physical uplink or stacking ports. This eliminates the need for specialised stacking cables and removes distance barriers that can limit topology options when using other stacking technology. 


Extensive Layer 2 features

The DGS-1510 series switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN and automatically shut down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators and customer service representatives, can quickly discover the type of error on cables and determine the cable quality. 


QoS, bandwidth control

The DGS-1510 series supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited for VoIP and video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches. This technology consolidates data and surveillance video transmission through a single SmartPro switch, sparing businesses the expense of maintaining expensive dedicated hardware and facilities. ASV also ensures the quality of real-time video for monitoring and control without compromising the transmission of conventional network data. The Auto Voice VLAN technology enhances VoIP service by automatically placing voice traffic from an IP phone to an assigned VLAN. With higher priority and an individual VLAN, these features guarantee the quality and security of VoIP traffic. Furthermore, the DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic. As a result, these voice and video packets take precedence over other packets. In addition, with Bandwidth Control, network administrators can reserve bandwidth for important functions that require more bandwidth or might require high priority. 


Secure your network

D-Link's innovative safeguard engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and helps to protect the internal IT network by screening ingress traffic based on MAC or IP addresses. The DGS-1510 series includes ARP Spoofing Prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages to the network. To prevent ARP Spoofing attacks, the switch uses Packet Control ACLs to block invalid packets that contain fake ARP messages. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorised IP assignment. 


IPv6 ready

The DGS-1510 series is IPv6 ready and supports various IPv6 functions such as MLD Snooping, IPv6 ACL/QoS, and IMPBv6 to ensure seamless integration of next generation networks. The DGS-1510 series also supports a IPv4/v6 dual stack function that allows the switch to act as a bridge between IPv4 and IPv6 networks. Finally, all DGS-1510 series are certified to be IPv6 Ready Logo Phase 2, which guarantees interoperability for IPv6 environments. 


Versatile management

The DGS-1510 series provides a D-Link Network Assistant Utility and a web based management interface that enables administrators to remotely control their network down to the port level. The D-Link Network Assistant Utility allows customers to easily discover multiple D-Link SmartPro Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC. It also simplifies the initial setup of the SmartPro Switches. Switches within the same L2 network segment that are connected to the user's PC are displayed on screen for instant access. This allows extensive switch configuration and basic setup of discovered devices including password changes and firmware upgrades. The DGS-1510 Series also supports D-View 6.0 and a fully featured Command Line Interface (CLI) via dedicated out-of-band console port. D-View 6.0 is a Network Management System that allows for the central management of critical network characteristics such as availability, reliability, resilience, and security. CLI management of the switches is possible via console port and Telnet interfaces. This makes it possible to adjust basic settings, passwords, configuration files, and firmware with ease. 


Layer 3 traffic management

The DGS-1510 series supports advanced traffic management features, including static routing. In static routing, IP routes are manually entered into a routing table, which allows for communication between different user groups in different VLAN segments in a network. The switch can directly handle inter VLAN routing using multiple interfaces, making the network run faster and more efficiently. Because the switches can manage internal routing, the network router can be assigned to handle external traffic routing only. 


Energy saving

DGS-1510 switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the 802.3az Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1510 switches offer advanced power-saving settings including port shutoff, LED shutoff, and system hibernation based on custom scheduling profiles.


 



DGS-1510-20 DGS-1510-28 DGS-1510-28X DGS-1510-28P DGS-1510-28XMP Form Factor Rackmount Rackmount Rackmount Rackmount Rackmount Switching Capacity 76 Gbps 92 Gbps 128 Gbps 92 Gbps 128 Gbps 100M/1G Copper  (RJ-45) Ports 16 24 24 24 24 1G/10G SFP/SFP+ Fibre Ports 2/2 2/2 0/4 2/2 0/4 PoE/PoE+ Ports N/A N/A N/A 24 24 PoE Standard N/A N/A N/A  802.3at  802.3at PoE Budget N/A N/A N/A 193 W 370 W PoE Capable Ports N/A N/A N/A Ports 1 to 24: Up to 30 W Ports 1 to 24: Up to 30 W Dimensions 280 x 180 x 44 mm 440 x 210 x 44 mm 440 x 210 x 44 mm 444 x 210 x 44 mm 440 x 308 x 44 mm  

The HPE 1950-24G Switch JG960A is a 24 Port Smart web-managed Gigabit switch with two 10GBASE-T copper ports and two SFP+ ports for SFP+/SFP fibre connections, ideal for small business customers needing advanced high-performance connections. True stacking of as many as 4 devices allows them to be logically administered as a single entity. The switches support Layer 3 static routing on IPv4 and IPv6. Other advanced features include ACLs, 802.1X, STP, RSTP, and MSTP. Limited lifetime warranty covers unit, fans and power supplies.

Features:

24-port Smart web-managed Gigabit Ethernet switch with 28 total ports
24 RJ-45 auto-negotiating 10/100/1000 ports
2 10-Gigabit 10GBASE-T and 2-ports 10-Gigabit SFP Ports
True 4-high stacking on edge switches; 2-high stacking on the aggregator switch
Layer 3 routing with 32 static routes
Enhanced network security with ACLs and network login
Usability and feature set optimised for smaller networks
Limited Lifetime Warranty
High-level Gigabit with 10GbE Networking for Advanced Small Businesses Each model of the HPE 1950 Switch Series includes four 10GbE connections to connect to servers, network storage devices, or to other switches.

Two connections of 10GBASE-T deliver 10GbE over copper Category 6a cabling for simple, affordable, high-bandwidth connections to a maximum distance of 100 meters.

Two SFP+ ports allow for fibre connectivity at various distances, at 1/10GbE speeds, using optional SFP+ 10GbE or SFP Gigabit transceivers.

Aggregate 10GbE connections for even higher bandwidth using Link Aggregation Control Protocol.


Simplified Network Administration Logically group or "stack" as many as four units of the HPE 1950 Switch Series and manage this as a single entity, greatly simplifying network administration. Interconnect stacked units using 10GbE connections, with as much as 40GbE total stacking bandwidth connecting the units.

Use the intuitive web-browser based interface to configure and administer these smart-managed devices.

These devices support SNMP versions 1, 2c and 3, allowing administration of these devices from a remote SNMP-based management platform.

Network Time Protocol facilitates timekeeping across your network so time-based actions and trouble-shooting logs are kept synchronised.

Units will automatically retrieve an IP Address from a DHCP server, allowing for near plug-and-play deployments.


Robust Security to Protect Your Network The HPE 1950 Switch Series lets you use Virtual LANs and access control lists to set bounds on what data can be seen by which users.

Leverage 802.1X with a RADIUS server to ensure only known and authorised users can access your network.

Multiple features guard your network from user or server spoofing and from malicious network-based attacks.

Help secure management traffic using supported SSL/HTTPS encryption and SNMPv3 capabilities.


Resiliency Features to Keep Your Network Running The HPE 1950 Switch Series supports Spanning Tree Protocol, Rapid Spanning Tree Protocol, and Multiple Spanning Tree Protocol standards for creating hot-standby recovery links.

Distribute important links across multiple units in a logical stack for added resiliency. Units can even be in different buildings and still be logically stacked.

Devices support two independent primary and secondary operating system flash images for backup and recovery during unit upgrades.


Click on the product images below to be taken to the range of products

The DGS-1510-28XMP s the next generation of SmartPro switch. It contains 24 10/100/1000 Mbps PoE plus 2 Gigabit SFP ports and 2 10G ports. With its 10G SFP+ ports, the DGS-1510-28P is ideal for deployments in the SME/SMB core with its 10G uplinks connecting with servers equipped with 10G port connectivity. For medium to large scale enterprise deployment, it can serve as a good interconnection between the core switch and edge switch.

The DGS-1510-28P Gigabit Stackable SmartPro Switches with 10G Uplinks is PoE-enabled for businesses looking to power VoIP phones, wireless access points or network cameras. The DGS-1510-28P is a 24-port PoE Switch that provides 24 PoE-enabled ports that can support up to 30 W of power output following the IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs.

Features:

24 10/100/1000 Mbps PoE+ Ports
Four 10G SFP+ stacking/uplink ports
PoE Power Budget - Up to 370W
128 Gbps switching capacity
Extensive Layer 2 features
QoS, bandwidth control
Secure your network
IPv6 ready
Versatile management
Layer 3 traffic management
Energy saving
The DGS-1510-28XMP's 10/100/1000 Mbps ports are PoE-enabled for powering devices such as IP cameras, VoIP phones and wireless access points. Compliant with 802.3af and 802.3at, the DGS-1510-28P supports up to 30W of power output on any particular PoE port up to 370W, providing flexibility in power allocation for a variety of powered devices, including new 802.11ac wireless access points that require 802.3at power for full functionality. Time based PoE enables power to a port to be shut off at a scheduled time, reducing power usage and increasing security by powering off devices that should not be in use during non-business hours.


DGS-1510-28XMP: 24 x 1000Base-T 802.3at PoE 4 x 10GbE SFP+ 370W PoE budget
2 x Smart fans Featuring D-Link Green 3.0 technology, the DGS-1510 series offers a high level of energy saving and efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv6 management and configurations ensures your network remains protected after the upgrade from IPv4 to IPv6. By offering multiple management options, the DGS-1510 Series allows quick deployment, infrastructure expansion, and seamless function upgrades. Built for small and medium-sized businesses, the DGS-1510 Series provide functionality, security, and manageability for a fraction of the standard cost of ownership. 

Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. 6 units or 288 Gigabit ports can be configured for a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix any models from the DGS-1510 SmartPro series in a single stack to allow simultaneous and easy configuration, management and troubleshooting. 

DGS-1510 series supports virtual stacking via D-Link's Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP. This simplifies management of small workgroups or wiring closets while allowing the network to be scaled to handle increased bandwidth demand. SIM not only reduces the number of IP address needed in your network but also allow switches to be stacked together over Ethernet instead of using physical uplink or stacking ports. This eliminates the need for any specialised stacking cables while at the same time removing the distance barriers that typically limit your topology options when using other stacking technology. 

These switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN and automatically shut down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators and customer service representatives, can quickly discover the type of error on cables and determine the cable quality.

The DGS-1510 Series supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited to VoIP and video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches.

Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Six units or 288 Gigabit ports can be configured as a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 series with cost efficiency. Users can mix from any of the DGS-1510 SmartPro series in a single stack to allow simultaneous and easy configuration, management and troubleshooting. 

Flexibility and scalability

The DGS-1510 series supports virtual stacking via D-Link's Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP. This simplifies management of small workgroups or wiring closets while allowing the network to be scaled to handle increased bandwidth demand. SIM reduces the number of IP address needed in the network and allows switches to be stacked together over Ethernet instead of using physical uplink or stacking ports. This eliminates the need for specialised stacking cables and removes distance barriers that can limit topology options when using other stacking technology. 


Extensive Layer 2 features

The DGS-1510 series switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN and automatically shut down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators and customer service representatives, can quickly discover the type of error on cables and determine the cable quality. 


QoS, bandwidth control

The DGS-1510 series supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited for VoIP and video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches. This technology consolidates data and surveillance video transmission through a single SmartPro switch, sparing businesses the expense of maintaining expensive dedicated hardware and facilities. ASV also ensures the quality of real-time video for monitoring and control without compromising the transmission of conventional network data. The Auto Voice VLAN technology enhances VoIP service by automatically placing voice traffic from an IP phone to an assigned VLAN. With higher priority and an individual VLAN, these features guarantee the quality and security of VoIP traffic. Furthermore, the DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic. As a result, these voice and video packets take precedence over other packets. In addition, with Bandwidth Control, network administrators can reserve bandwidth for important functions that require more bandwidth or might require high priority. 


Secure your network

D-Link's innovative safeguard engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and helps to protect the internal IT network by screening ingress traffic based on MAC or IP addresses. The DGS-1510 series includes ARP Spoofing Prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages to the network. To prevent ARP Spoofing attacks, the switch uses Packet Control ACLs to block invalid packets that contain fake ARP messages. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorised IP assignment. 


IPv6 ready

The DGS-1510 series is IPv6 ready and supports various IPv6 functions such as MLD Snooping, IPv6 ACL/QoS, and IMPBv6 to ensure seamless integration of next generation networks. The DGS-1510 series also supports a IPv4/v6 dual stack function that allows the switch to act as a bridge between IPv4 and IPv6 networks. Finally, all DGS-1510 series are certified to be IPv6 Ready Logo Phase 2, which guarantees interoperability for IPv6 environments. 


Versatile management

The DGS-1510 series provides a D-Link Network Assistant Utility and a web based management interface that enables administrators to remotely control their network down to the port level. The D-Link Network Assistant Utility allows customers to easily discover multiple D-Link SmartPro Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC. It also simplifies the initial setup of the SmartPro Switches. Switches within the same L2 network segment that are connected to the user's PC are displayed on screen for instant access. This allows extensive switch configuration and basic setup of discovered devices including password changes and firmware upgrades. The DGS-1510 Series also supports D-View 6.0 and a fully featured Command Line Interface (CLI) via dedicated out-of-band console port. D-View 6.0 is a Network Management System that allows for the central management of critical network characteristics such as availability, reliability, resilience, and security. CLI management of the switches is possible via console port and Telnet interfaces. This makes it possible to adjust basic settings, passwords, configuration files, and firmware with ease. 


Layer 3 traffic management

The DGS-1510 series supports advanced traffic management features, including static routing. In static routing, IP routes are manually entered into a routing table, which allows for communication between different user groups in different VLAN segments in a network. The switch can directly handle inter VLAN routing using multiple interfaces, making the network run faster and more efficiently. Because the switches can manage internal routing, the network router can be assigned to handle external traffic routing only. 


Energy saving

DGS-1510 switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the 802.3az Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1510 switches offer advanced power-saving settings including port shutoff, LED shutoff, and system hibernation based on custom scheduling profiles.


 



DGS-1510-20 DGS-1510-28 DGS-1510-28X DGS-1510-28P DGS-1510-28XMP Form Factor Rackmount Rackmount Rackmount Rackmount Rackmount Switching Capacity 76 Gbps 92 Gbps 128 Gbps 92 Gbps 128 Gbps 100M/1G Copper  (RJ-45) Ports 16 24 24 24 24 1G/10G SFP/SFP+ Fibre Ports 2/2 2/2 0/4 2/2 0/4 PoE/PoE+ Ports N/A N/A N/A 24 24 PoE Standard N/A N/A N/A  802.3at  802.3at PoE Budget N/A N/A N/A 193 W 370 W PoE Capable Ports N/A N/A N/A Ports 1 to 24: Up to 30 W Ports 1 to 24: Up to 30 W Dimensions 280 x 180 x 44 mm 440 x 210 x 44 mm 440 x 210 x 44 mm 444 x 210 x 44 mm 440 x 308 x 44 mm  

The HPE 1950-24G-PoE+ JG962A Switch is a 24 Port PoE+ Smart web-managed Gigabit switch with two 10GBASE T copper ports and two SFP+ ports for SFP+/SFP fibre connections, ideal for small business customers needing advanced high-performance connections. True stacking of as many as 4 devices allows them to be logically administered as a single entity. The switches support Layer 3 static routing on IPv4 and IPv6. Other advanced features include ACLs, 802.1X, STP, RSTP, and MSTP. Limited lifetime warranty covers unit, fans and power supplies.

Features:

24-port Smart web-managed Gigabit Ethernet switch with 28 total ports
24 RJ-45 auto-negotiating 10/100/1000 ports
2 10-Gigabit 10GBASE-T and 2-ports 10-Gigabit SFP Ports
24 Ports of PoE+ with a budget of 370W
True 4-high stacking on edge switches; 2-high stacking on the aggregator switch
Layer 3 routing with 32 static routes
Enhanced network security with ACLs and network login
Usability and feature set optimised for smaller networks
Limited Lifetime Warranty
High-level Gigabit with 10GbE Networking for Advanced Small Businesses Each model of the HPE 1950 Switch Series includes four 10GbE connections to connect to servers, network storage devices, or to other switches.

Two connections of 10GBASE-T deliver 10GbE over copper Category 6a cabling for simple, affordable, high-bandwidth connections to a maximum distance of 100 meters.

Two SFP+ ports allow for fibre connectivity at various distances, at 1/10GbE speeds, using optional SFP+ 10GbE or SFP Gigabit transceivers.

Aggregate 10GbE connections for even higher bandwidth using Link Aggregation Control Protocol.


Simplified Network Administration Logically group or "stack" as many as four units of the HPE 1950 Switch Series and manage this as a single entity, greatly simplifying network administration. Interconnect stacked units using 10GbE connections, with as much as 40GbE total stacking bandwidth connecting the units.

Use the intuitive web-browser based interface to configure and administer these smart-managed devices.

These devices support SNMP versions 1, 2c and 3, allowing administration of these devices from a remote SNMP-based management platform.

Network Time Protocol facilitates timekeeping across your network so time-based actions and trouble-shooting logs are kept synchronised.

Units will automatically retrieve an IP Address from a DHCP server, allowing for near plug-and-play deployments.


Robust Security to Protect Your Network The HPE 1950 Switch Series lets you use Virtual LANs and access control lists to set bounds on what data can be seen by which users.

Leverage 802.1X with a RADIUS server to ensure only known and authorised users can access your network.

Multiple features guard your network from user or server spoofing and from malicious network-based attacks.

Help secure management traffic using supported SSL/HTTPS encryption and SNMPv3 capabilities.


Resiliency Features to Keep Your Network Running The HPE 1950 Switch Series supports Spanning Tree Protocol, Rapid Spanning Tree Protocol, and Multiple Spanning Tree Protocol standards for creating hot-standby recovery links.

Distribute important links across multiple units in a logical stack for added resiliency. Units can even be in different buildings and still be logically stacked.

Devices support two independent primary and secondary operating system flash images for backup and recovery during unit upgrades.


Click on the product images below to be taken to the range of products

Going Gigabit and PoE+ Just Got More Cost-Effective!

The GS724TPP 24-Port Gigabit Switch with PoE+ and 2 SFP Ports join the NETGEAR Standalone Smart Switches family, adding full 24 port PoE+ support for deployment of modern highpower PoE devices. Cautious spender organizations can now deploy denser PoE+ devices connected to a costeffective switch, with a reasonable PoE power budget of 380W

NETGEAR Smart Switches offer powerful Layer 2 features, great PoE functionality, and enhanced performance and usability. These switches are the ideal solution even for the most advanced small and medium organizations looking for the best combination of features, performance, and value: they are purposely designed for converged networks where voice, video, data are all carried on a single network platform.

Temperature- and load-based fan-speed control combines accurate monitoring with minimized system acoustic noise: the GS724TPP supports quiet rack mounting operation with a maximum of 35.0 dBA (GS724TPP) even at full power and 25°C (77°F) ambient.


Key Features



24 x PoE+ Gigabit ports with 380W PoE budget (GS724TPP)
2 dedicated Gigabit SFP fiber uplink ports
Non-blocking switching with 52Gbps
Flexible rack-mounting option
Advanced VLAN support for better network segmentation
L2/L3/L4 access control lists (ACLs) for granular network access control including 802.1x port authentication
Advanced per port PoE controls for remote power management of PoE connected devices including operation scheduling




Switches with Essential L2/L2+ Features for SMB Networks Powerful L2 and L2+/Layer 3 Lite features, great PoE functionality, and enhanced performance and usability optimized for network efficiency, operational cost savings, and ease of management. These switches are the ideal solution even for the most advanced small and medium organizations looking for the best combination of features, performance, and value.



Versatile and easy to manage Smart switches with optional remote/cloud management are configurable and manageable anywhere, anytime. All you need is the NETGEAR Insight management solution for easy setup, monitoring and remote/cloud management of your Insight Managed Switches. Now you can setup, manage and monitor your network from anywhere in the world.



Get switching now, remote/cloud management now or later Purchase your Smart switch now, manage it in local device GUI, decide later when you want to use remote/cloud management with Insight and activate Insight whenever you want



Build a Future-Proof Network with NETGEAR Future-proof with features like: VLANs, Access Control List, L3 Lite static routing, Multicast Groups, IPv6, QoS, Energy Efficient Ethernet (IEEE 802.3az)

This switch comes with 1 Year Free Insight Pro Cloud Management The NETGEAR® new generation Gigabit 52 port (48 port copper + 4 port fibre) high powered PoE+Smart Switch offers powerful L2 features, better PoE functions, and enhanced performance and usability. The GS752TPP comes with 48 PoE+ ports and a total PoE power budget of 760w.It can be used in any deployment with high-density of power-hungry devices, such as multiple 11ac Wireless Access Point, PTZ cameras and Video IP phones.It is purposely designed for the converged networks where voice, video, data are all carried on a single network platform for network eff ciency, operational cost savings, and ease of management.

The 52-port Gigabit with PoE switch comes with 4 dedicated Gigabit SFP ports for fibre connectivity. The new generation of Gigabit PoE Smart Switch from NETGEAR is the optimised solution providing the best value at an affordable SMB price point.



GS752TPP : 48 port 1000Base-T Gigabit PoE Smart Switch
4 dedicated SFP ports
48 PoE+ Ports 760W PoE budget


Highlights:

Designed for Converged Network, Big or Small

Gigabit Speed with 48 ports capable of PoE+
Auto Voice VLAN for fast and reliable deployment of VoIP
Auto Video VLAN, following the same concept of Auto Voice, help speed up your deployment of IP-based surveilliance system
Static routing, helps to route internal traffic for more efficient use of network resources
IGMP and MLD snooping, providing advanced multicast filtering
Build a future-proof network with NETGEAR

Solid performance with non-blocking architecture, 8K MAC addresses, 256 VLANs, 480 shared ACL entries, 32static routes, and 1,024 Multicast Groups
Comprehensive IPv6 supporting management, QoS and ACL, ensuring investment protection and a smooth migration to IPv6-based network
4 Dedicated SFPs, not only providing fibre uplinks, but also uplink redundancy and failover, improving reliability and availability for network virtualisation
Energy Efficient Ethernet (IEEE802.3az) support for more energy saving in the future when more EEE-compliant end devices come to market
Advanced QoS with IPv4/IPv6 ingress traffic filtering (ACLs) and prioritisation (QoS - Diff Serv)
Dynamic VLAN assignment for easy user authentication and location-independent access to network


Network Development Made Easy

Auto Voice VLAN for easy development of VoIP
Auto Video for simple deployment of IP Surveillaince
ACL Wizard for a guided tour to set up your network access control
Smart Control Center, a powerful tool for multi-switch discovery, deployment, monitoring and firmware upgrade
PoE Timer for scheduling on/off time of your PoE powered devices.
Smart IT, not Big IT

Easy to manage via web-Based Management GUI or Smart Control Center for multi-switch deployment
Standard-based technology, ensuring interoperability with any standard-based devices in the existing network
Dual firmware images, improving reliability and uptime to your network
Worry-free with NETGEAR ProSAFE Lifetime Hardware Warranty
Assist with customer deployment with 1-year Free 24x7 Advanced Technical Support

M4300-28G comes with 24 ports 1G, 2 ports 10GBASE-T and 2 ports 10GBASE-X SFP+ in a full-width form factor. All 4 ports 10G are independent and can be used for stacking or uplinks: they are 1G backward compatible. M4300-28G is delivering resilient and secure access layer in campus LAN environments and commercial buildings. Ideal for server and storage applications: 1+1 PSU protection and front to back cooling ensure hot and cold aisle compliance.

The NETGEAR® M4300-28G Stackable Switch delivers L2/L3/L4 and IPv4/IPv6 rich services for enterprise edge and SMB aggregation deployments with unrivaled ease of use: 10 Gigabit models can seamlessly stack with 1 Gigabit models within the series. Non-stop forwarding virtual chassis architecture provides advanced High Availability (HA) with hitless failover, that is, distributed link aggregation allows for load balancing and virtually zero downtime. License-free L3 feature set includes static routing, policy-based routing, RIP, VRRP, OSpiv as well as Multicast PIM routing. The NETGEAR M4300 Switch Series is ready for the future, with Software-defined Network (SDN) and OpenFlow 1.3 enabled for your network.

NETGEAR Intelligent Edge Switch solutions combine the latest advances in hardware and software engineering for higher flexibility, lower complexity and stronger investment protection, at a high-value price point.

Key features:

The M4300-28G switch provides 24 Gigabit access ports with 2 10GBASE-T and 2 10GBASE-X SFP+ uplink connectivity
All (4) 10G ports are independent and 1G backward compatible for progressive transition to 10G speeds
Cost effective 1G access layer in campus LAN networks, and high performance 10G distribution layer for midsize organisations networks
Zero Touch AV-over-IP with pre-configured L2 Multicast on all 1G models (1G AV encoders and decoders)
Advanced Layer 2, Layer 3 and Layer 4 feature set - no license required - including Policy Based Routing, RIP, VRRP, OSPF and PIM
Innovative mixed "Spine and Leaf", 1G and 10G stacking with nonstop forwarding and hitless failover redundancy
Low acoustics, can be paired in a single rack space for redundant Top of Rack
Up to 384 (Gigabit) ports, 768 (10 Gigabit) ports or a combination in a stack seen as one “logical” switch
Hot swap, redundant power supplies and full provisioning
Mixed Stack of 1G and 10G models provides 16K MAC, 2K ARP/NDP, 4K VLANs and 512 routes
SDN-Ready OpenFlow 1.3 support for maximum investment protection


Full Width Form Factor
24 10/100/ 1000 BASE-T RJ45 ports
2 1000/10G BASE-X SFP+ ports
2 ports (independent) 1G; 10G SFP+ Ports
128 Gps Switcing Fabric



Modular 2 bays 1 PSU included: APS250W
Fixed Fan Front-to-back 30.3dB

Highlights

Best-in-class stacking

M4300 is flexible enough for mixed stacking between 10/40 Gigabit and 1 Gigabit models, using any 10G/40G port with any media type (RJ45, SFP+, DAC cables)
High-availability is another key differentiator for stackable solutions: in case of a master switch failure, NSF and hitless failover ensure the standby switch takes over while forwarding plane continues to forward traffic on the operational stack members without any service interruption
Higher flexibility

10 Gigabit ports are all independent and 1G backward compatible for progressive transition to 10G speeds
Lower complexity

Entire feature set including L2 switching (multi-tiered access control) and L3 routing (static, RIP, OSPF, VRRP, PIM, PBR) is available without license
DHCP/BootP innovative auto-installation including firmware and configuration file upload automation
Investment protection

Line-rate spine and leaf stacking topologies offer multiple possibilities in server rooms, in branch collapsed cores or at the edge of growing networks
Even if an organisation is not ready for SDN, OpenFlow support offers future-ready design for maximum investment protection
Secure services

With successive tiering, the Authentication Manager allows for authentication methods per port for a tiered authentication based on configured time-outs
With BYOD, tiered Dot1x -> MAB -> Captive Portal authentication is powerful and simple to implement with strict policies
Industry standard management

Industry standard command line interface (CLI), functional NETGEAR web interface (GUI), SNMP, sFlow and RSPAN
Single-pane-of-glass NMS300 management platform with centralised firmware updates and mass-configuration support
Industry leading warranty

NETGEAR M4300 series is covered under NETGEAR ProSAFE Lifetime Hardware Warranty*
90 days of Technical Support via phone and email, Lifetime Technical Support through online chat and Lifetime Next Business Day hardware replacement

Get your network ready for tomorrow with the NETGEAR M4300-28G-PoE+ (GSM4328PA) switch. This cost-effective and versatile powerhouse delivers high-performance Gigabit connectivity to both small and medium businesses, ideal for campus LANs and mid-size organization networks.

Boost Performance and Efficiency:



24x Gigabit Ethernet ports: Experience reliable and speedy connectivity for your devices.
PoE+ support: Power up Wi-Fi access points, VoIP phones, IP cameras, and more with up to 30 watts per port.
Advanced Layer 2/3/4 features: Implement robust capabilities like policy-based routing, RIP, VRRP, OSPF, and PIM, without additional licenses.
Innovative stacking: Build a resilient and scalable network with mixed 1GbE and 10GbE stacking, featuring nonstop forwarding and hitless failover.


Future-proof Your Investment:

SDN-ready OpenFlow 1.3 support: Embrace the future of network control and adapt to your evolving needs.

Mixed 1GbE and 10GbE stacking: Protect your investment by seamlessly integrating new 10GbE devices into your existing infrastructure.

Comprehensive security: Implement robust safeguards with advanced L2/3/4 features like malicious code detection and DoS attack prevention.

Multi-vendor Auto-iSCSI capabilities: Simplify virtualization with effortless iSCSI configuration.

Effortless Management and Control:

Flexible management options: Choose from industry-standard CLI, web GUI, or NMS300 platform for seamless control and monitoring.

Auto-installation: Streamline deployment with automatic firmware and configuration file upload.

Dual firmware image: Update firmware with minimal service disruption.

Extensive warranty: Gain peace of mind with a lifetime hardware warranty, next business day hardware replacement, and 24x7 technical support.

The NETGEAR M4300-28G-PoE+ is the perfect solution for businesses looking to power up their network with advanced capabilities and robust security, all at a cost-effective price point. Order yours today and unlock the full potential of your network!

The NETGEAR M4300-28G-PoE+ (GSM4328PB) 24-port Layer 3 managed stackable 10-Gigabit switch is part of the Intelligent Edge Switch solution that combines the latest advances in hardware and software engineering for higher flexibility, lower complexity and stronger investment protection, at a high-value price point. This NETGEAR M4300-28G-PoE+ (GSM4328PB) switch offers twenty-four (24) 10-Gigabit Ethernet ports, two (2) 10-Gigabit copper, and two (2) 10-Gigabit SFP+ ports, making it ideal for a small or medium size business to deploy a 10GbE network that is ready for today, and tomorrow technology. NETGEAR M4300-28G-PoE+ (GSM4328PB) is the ideal partner for the latest 802.11ac WiFi by ensuring through put isn't restricted and data flows easily between connected devices.

Key FeaturesCost effective 1G access layer in campus LAN networks, and high performance 10G distribution layer for midsize organisations networks
Power over Ethernet (PoE+) up to 30 watts per port with hot swap, redundant power supplies and full provisioning.
Advanced Layer 2, Layer 3 and Layer 4 feature set - no license required - including Policy Based Routing, RIP, VRRP, OSPF and PIM
Innovative mixed "Spine and Leaf", 1G and 10G stacking with nonstop forwarding and hitless failover redundancy
Up to 384 (Gigabit) ports, or 384 (10 Gigabit) ports, or a combination of both in a single logical switch
Mixed Stack of 1G and 10G models provides 16K MAC, 2K ARP/NDP, 4K VLANs and 512 routes
SDN-Ready OpenFlow 1.3 support for maximum investment protection
SoftwareAdvanced classifier-based, time-based hardware for L2 (MAC), L3 (IP) and L4 (UDP/TCP transport ports) security and prioritisation
Selectable Port-Channel / LAG (802.3ad - 802.1AX) L2/L3/L4 hashing for fault tolerance and load sharing with any type of Ethernet channelling
Voice VLAN with SIP, H323 and SCCP protocols detection and LLDP-MED IP phones automatic QoS and VLAN configuration
Efficient authentication tiering with successive DOT1X, MAB and Captive Portal methods for streamlined BYOD
Comprehensive IPv4/IPv6 static and dynamic routing including Proxy ARP, OSPF, Policy-based routing and automatic 6-to-4 tunnelling
Enhanced IPv4/IPv6 multicast forwarding with IGMPv3/MLDv2 ASM and SSM Proxy and Control Packet Flooding protection
High performance IPv4/IPv6 multicast routing with PIM timer accuracy and unhandled PIM (S,G,rpt) state machine events transitioning
Advanced IPv4/IPv6 security implementation including malicious code detection, DHCP Snooping, IP Source Guard protection and DoS attacks
Innovative multi-vendor Auto-iSCSI capabilities for easier virtualization optimisation
AvailabilityVertical or horizontal flexible stacking with management unit hitless failover and nonstop forwarding across operational stack members
Spine and leaf architecture with every leaf switch (1G access switches) connecting to every spine switch (distributed 10G "core" switches)
Stacking and distributed link aggregation allow for multi-resiliency with zero downtime and load balancing capabilities
Link Dependency new feature enables or disables ports based on the link state of different ports
Per VLAN Spanning Tree and Per VLAN Rapid Spanning Tree (PVSTP/PVRSTP) offer interoperability with PVST+ infrastructures
ManagementDHCP/BootP innovative auto-installation including firmware and configuration file upload automation
Industry standard SNMP, RMON, MIB, LLDP, AAA, sFlow and RSPAN remote mirroring implementation
Service port for out-of-band Ethernet management (OOB)
Standard RS232 straight-through serial RJ45 and Mini-USB ports for local management console
Standard USB port for local storage, logs, configuration or image files
Dual firmware image and configuration file for updates with minimum service interruption
Industry standard command line interface (CLI) for IT admins used to other vendors commands
Fully functional Web console (GUI) for IT admins who prefer an easy to use graphical interface
Single-pane-of-glass NMS300 management platform with mass-configuration support
NETGEAR WarrantyThis product is backed by a NETGEAR ProSafe Lifetime Hardware Warranty.
Lifetime Next Business Day Hardware Replacement.
ProSUPPORT 24x7 Advanced Technical Support via phone for 90 days (Remote diagnostics performed by our technical experts for prompt resolution of technical issues). ProSUPPORT coverage can be extended by purchasing one, three, or five year contracts.
ProSUPPORT Lifetime 24x7 Advanced Technical Support via chat. (Remote diagnostics performed by our technical experts for prompt resolution of technical issues).
Standard warranty: Lifetime



The NETGEAR M4300 Stackable Switch Series delivers L2/L3/L4 and IPv4/IPv6 cost-effective services for mid-enterprise edge with full PoE+ and SMB core deployments with unrivalled ease of use: 10 Gigabit models can seamlessly stack with 1 Gigabit models within the series, enabling spine and leaf line-rate stacking topologies. Non-stop forwarding (NSF) virtual chassis architectures provide advanced High Availability (HA) with hitless failover across the stack.

Dual redundant, modular power supplies equipping full width models contribute to business continuity management. Layer 3 feature set includes static, dynamic and policy-based routing - as standard. Perfect for wireless access, unified communications and IP video, the NETGEAR M4300 Switch Series is also ready for the future, with Software-defined Network (SDN) and OpenFlow 1.3 enabled for your network.

Best-in-class stacking

M4300 is flexible enough for mixed stacking between 10 Gigabit and 1 Gigabit models, using any 10G port with any media type (RJ45, SFP+, DAC cables)

High-availability is another key differentiator for stackable solutions: in case of a master switch failure, NSF and hitless failover ensure the standby switch takes over while forwarding plane continues to forward traffic on the operational stack members without any service interruption

Higher flexibility

Two half-width M4300 switches can be paired in a single rack space for redundant Top of Rack installations with Auto-iSCSI prioritization

10 Gigabit ports are all independent and 1G backward compatible for progressive transition to 10G speeds

Lower complexity

Entire feature set including L2 switching (multi-tiered access control) and L3 routing (static, RIP, OSPF, VRRP, PIM, PBR) is available without license

DHCP/BootP innovative auto-installation including firmware and configuration file upload automation

Investment protection

Line-rate spine and leaf stacking topologies offer multiple possibilities in server rooms, in branch collapsed cores or at the edge of growing networks

Even if an organization is not ready for SDN, OpenFlow support offers future-ready design for maximum investment protection

Secure services

With successive tiering, the Authentication Manager allows for authentication methods per port for a tiered authentication based on configured time-outs

With BYOD, tiered Dot1x -> MAB -> Captive Portal authentication is powerful and simple to implement with strict policies

Industry standard management

Industry standard command line interface (CLI), functional NETGEAR web interface (GUI), SNMP, sFlow and RSPAN

Single-pane-of-glass NMS300 management platform with centralized firmware updates and mass-configuration support

Industry leading warranty

NETGEAR M4300 series is covered under NETGEAR ProSafe Lifetime Hardware Warranty

90 days of Technical Support via phone and email, Lifetime Technical Support through online chat and Lifetime Next Business Day hardware replacement

The NETGEAR ProSAFE 24-Port Layer 3 Managed Stackable 10 Gigabit Switch stacks with 1 Gigabit models within the M4300 series, enabling spine and leaf line-rate stacking topologies. Non-stop forwarding (NSF) virtual chassis architectures provide advanced High Availability (HA) with hitless failover across the stack. Dual redundant, modular power supplies equipping full width models contribute to business continuity management. Layer 3 feature set includes static, dynamic and policy-based routing as standard. Perfect for wireless access, unified communications and IP video. The M4300-48X is future-proofed, with Software-defined Network (SDN) and OpenFlow 1.3 enabled for your network.



Key FeaturesTwenty four (24) 10GBASE-T RJ45 ports
High performance 10G distribution layer for midsize organisations' networks
Advanced Layer 3 features including static, policy-based and RIP OSPF VRRP PIM dynamic routing - no licence needed
Full width with dual, redundant modular PSUs for business continuity
Innovative mixed "Spine and Leaf", 1Gb and 10Gb stacking with nonstop forwarding and hitless failover redundancy
Ultra-low latency and scalable table size with 128K MAC, 8K ARP/NDP, 4K VLANs, 12K routes
SDN-Ready OpenFlow 1.3 support for maximum investment protection
1Gb Ethernet service port for out-of-band management (OOB, RJ45)
RS232 straight-through serial RJ45 for local management console
Mini-USB port for local management console
USB port for local storage, logs, configuration or image files





Half Width Form Factor
24 RJ45 ports 100M; 1G; 10G
480 Gps Switcing Fabric
4 ports (shared, back) 1G; 10G SFP+ Ports



Modular 1 bay 1 PSU included: APS250W
Fixed Fan Front-to-back 35.8dB

Highlights

Best-in-class stacking

M4300 is flexible enough for mixed stacking between 10/40 Gigabit and 1 Gigabit models, using any 10G/40G port with any media type (RJ45, SFP+, DAC cables)
High-availability is another key differentiator for stackable solutions: in case of a master switch failure, NSF and hitless failover ensure the standby switch takes over while forwarding plane continues to forward traffic on the operational stack members without any service interruption
Higher flexibility

Two half-width M4300 switches can be paired in a single rack space for redundant Top of Rack installations with Auto-iSCSI prioritisation
10 Gigabit ports are all independent and 1G backward compatible for progressive transition to 10G speeds
Lower complexity

Entire feature set including L2 switching (multi-tiered access control) and L3 routing (static, RIP, OSPF, VRRP, PIM, PBR) is available without license
DHCP/BootP innovative auto-installation including firmware and configuration file upload automation
Investment protection

Line-rate spine and leaf stacking topologies offer multiple possibilities in server rooms, in branch collapsed cores or at the edge of growing networks
Even if an organisation is not ready for SDN, OpenFlow support offers future-ready design for maximum investment protection
Secure services

With successive tiering, the Authentication Manager allows for authentication methods per port for a tiered authentication based on configured time-outs
With BYOD, tiered Dot1x -> MAB -> Captive Portal authentication is powerful and simple to implement with strict policies
Industry standard management

Industry standard command line interface (CLI), functional NETGEAR web interface (GUI), SNMP, sFlow and RSPAN
Single-pane-of-glass NMS300 management platform with centralised firmware updates and mass-configuration support
Industry leading warranty

NETGEAR M4300 series is covered under NETGEAR ProSAFE Lifetime Hardware Warranty*
90 days of Technical Support via phone and email, Lifetime Technical Support through online chat and Lifetime Next Business Day hardware replacement

The Aruba Instant On 1930 24G 4SFP+ Switch (JL682A) is a 24G 4SFP/SFP+, advanced, smart-managed, fixed configuration Gigabit switch designed for small businesses that are easy-to-deploy and affordable. They’re made to handle today’s bandwidth-heavy applications like voice and video conferencing, enabling consistent connectivity to enhance performance.

Aruba Instant On 1930 24G 4SFP+ Switch (JL682A) Key FeaturesPlug and play
24 RJ-45 auto-sensing 10/100/1000 ports
4 SFP 1/10GbE ports
Smart-managed layer 2+ Ethernet
Security controls
Convenient mobile app



Simplify Network Deployment and Management for Small Organizations


The Aruba Instant On 1930 switch series features easy-to-use, out-of-the-box, plug-and-play deployment. The series offers a complete portfolio of choices for increased small business flexibility. It consists of seven models including 8G-, 24G-, and 48G-ports with and without class 4 PoE (i.e. PoE+).


The 24- and 48- port models include four SFP/SFP+ transceiver slots that support Gigabit or 10-Gigabit speeds for fiber connectivity. The Aruba Instant On 1930 switch series can be deployed using two management modes – Instant On cloud-management (access via mobile app and/or web portal) and the local web GUI.


Main Features



Seven advanced smart managed Layer 2+ Gigabit switches for high-performance connectivity.

Non-PoE and Class 4 PoE (i.e. PoE+) 8-, 24- and 48-port models for deployment flexibility.

1G/10G SFP+ ports on 24-and 48-port models for fiber connectivity.

Aruba Instant On mobile app and/or cloud-based web portal for easy network management onsite or remotely.

Option to manage your switches through local web GUI.

Limited Lifetime Warranty.



Keep Your Business Protected with Integrated Security Features


The Aruba Instant On 1930 switch series supports energy efficient Ethernet for lower power consumption and an enhanced feature set for more robust operation. Enhanced security features such as IEEE 802.1x, and VLANs guard your network from unwanted or unauthorized access.


Automatic denial-of-service (DOS) monitors and protects the network against malicious attacks. Management security restricts access to critical configuration commands, offers multiple privilege levels with password protection.



Deliver High Perfomance


The Aruba Instant On 1930 switch series delivers advanced functionalities including customizable like VLANs, link aggregation, Spanning Tree Protocols, and IEEE 802.1X access control.


8-, 24-, and 48-port configurations with a choice of non-PoE and Class 4 PoE models provides deployment flexibility that fits all small business environment. Class4 PoE options allow to power devices like IP phones, surveillance cameras and access points, without the cost of additional cabling.


The 24- and 48-port models include 1G/10G SFP+ ports for reliable fiber connectivity and other connections across longer distances. The switch series is covered by the Limited Lifetime Warranty with 24x7 phone support for 90 days and chat support for the entire warranty duration.

The HPE 5130 EI Switch Series delivers flexibility, scalability and low TCO at the access layer of medium and large enterprise campus networks. The series offers enterprise class QoS and security, Hewlett Packard Enterprise Intelligent Resilient Fabric (IRF) stacking, static layer 3 routing and RIP, convenient fixed 10GbE uplink ports, PoE+, ACLs, IPv6 and delivers energy savings with Energy Efficient Ethernet. The 5130 EI Switch Series can be managed with HPE Intelligent Management Center (IMC) for a single view of your entire network.

Features Scalable and Flexible Access Layer Switches

The HPE 5130 EI Switch Series delivers flexibility, scalability and low TCO at the access layer of medium- and large-enterprise campus networks. The 5130 supports stacking, fixed 10GbE ports, static layer 3 routing and RIP v1/v2, PoE+, ACLs, IPv6 and power savings with Energy Efficient Ethernet. - Intelligent Resilient Fabric (IRF) virtualizes up to nine physical switches into one logical device for simpler, flatter, more agile networks. - Four fixed 10GbE uplinks (SFP+ and 10GBASE-T) deliver performance for bandwidth intensive applications. - Includes Software-defined Network (SDN) capabilities with OpenFlow 1.3 support for future proofing your network. - Limited Lifetime Warranty and no software licensing required.

Improved Quality of Service with Traffic Management

The HPE 5130 EI Switch Series supports advanced classifier-based QoS which groups traffic using multiple match criteria based on Layer 2 and 3 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or entire switch. - Provides traffic prioritization with supported congestion actions include: strict priority (SP) queuing, weighted round robin (WRR), weighted random early detection (WRED), and SP+WRR and traffic policing with Committed Access Rate (CAR) and line rate. - Reduce unwanted network traffic with broadcast control allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic.

Comprehensive Security Control

The HPE 5130 EI Switch Series supports flexible authentication methods including 802.1X and MAC Authentication for greater security and policy-driven application authentication. Per-user access control lists (ACLs) provide identity-driven security and access control. - ACLs provide IP Layer 2 to Layer 4 traffic filtering; supports global ACL, VLAN ACL, port ACL, and IPv6 ACL. - Security with encryption of access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3, and other features including DHCP protection, IP source guard, dynamic ARP protection and RADIUS/HWTACAS.

Single View of the Network

The HPE 5130 EI Switch Series can be seamlessly managed with HPE Intelligent Management Center (IMC) to provide end-to-end network transparency with consistent network experience through comprehensive configuration, compliance and policy management. - RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events.

The HP 5130 EI Switch Series is comprised of Gigabit Ethernet switches that support static and RIP Layer 3 routing, diversified services, and IPv6 forwarding, as well as provide four 10-Gigabit Ethernet (10GbE) extended interfaces. Unique Intelligent Resilient Framework (IRF) technology creates a virtual fabric by managing several switches as one logical device, which increases network resilience, performance, and availability, while reducing operational complexity.

These switches provide Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in data centers. High availability, simplified management, and comprehensive security control policies are among the key features that distinguish this series.

HPE FlexNetwork 5130 EI switch with 24 1GbE, power-over-Ethernet-plus ports (up to 370W), 2 SFP+ ports, and 2 10GbE ports

Features

Scalable managed switches with static layer 3 routing, RIP and 9 chassis IRF stacking.
Four fixed 10GbE uplinks (SFP+ and 10GBASE-T).
PoE+ models for voice, video and wireless.
Limited Lifetime Warranty.
Scalable and Flexible Access Layer Switches

The HPE FlexNetwork 5130 EI Switch Series delivers flexibility, scalability and low TCO at the access layer of medium- and large-enterprise campus networks. The 5130 supports stacking, fixed 10GbE ports, static L3 routing and RIP v1/v2, PoE+, ACLs, IPv6 and Energy Efficient Ethernet power savings.

Intelligent Resilient Fabric (IRF) virtualizes up to nine physical switches into one logical device for simpler, flatter, more agile networks.

Four fixed 10GbE uplinks (SFP+ and 10GBASE-T) deliver performance for bandwidth intensive applications.

Includes Software-defined Network (SDN) capabilities with OpenFlow 1.3 support for future proofing your network.

Limited Lifetime Warranty and no software licensing required.

Improved Quality of Service with Traffic Management

The HPE FlexNetwork 5130 EI Switch Series supports advanced classifier-based QoS which groups traffic using multiple match criteria based on Layer 2 and 3 information, applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or entire switch.

Provides traffic prioritization with supported congestion actions include: strict priority (SP) queuing, weighted round robin (WRR), weighted random early detection (WRED), and SP+WRR and traffic policing with Committed Access Rate (CAR) and line rate.

Reduce unwanted network traffic with broadcast control allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic.

Comprehensive Security Control

The HPE FlexNetwork 5130 EI Switch Series supports flexible authentication methods including 802.1X and MAC Authentication for greater security and policy-driven application authentication. Per-user access control lists (ACLs) provide identity-driven security and access control.

ACLs provide IP Layer 2 to Layer 4 traffic filtering, supports global ACL, VLAN ACL, port ACL, and IPv6 ACL.

Security with encryption of access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3, and other features including DHCP protection, IP source guard, dynamic ARP protection and RADIUS/HWTACAS.

Single View of the Network

The HPE FlexNetwork 5130 EI Switch Series can be seamlessly managed with HPE Intelligent Management Center (IMC) to provide end-to-end network transparency with consistent network experience through comprehensive configuration, compliance and policy management.

RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events.

Aruba 2930F 24G 4Sfp Switch (JL259A)The Aruba 2930F 24G 4Sfp Switch  is designed for customers creating smart digital workplaces that are optimised for mobile users with an integrated wired and wireless approach. These convenient Layer 3 network switches include built-in uplinks and power so are simple to deploy and manage with advanced security and network management tools like Aruba ClearPass Policy Manager, Aruba AirWave and cloud-based Aruba Central.

Aruba 2930F Key Features

Aruba Layer 3 switch series with VSF stacking, static, RIP and Access OSPF Routing, Dynamic Segmentation, ACLs, and robust QoS
Supports advanced security and network management via Aruba ClearPass Policy Manager, Aruba AirWave and Aruba Central
Convenient built-in 1GbE or 10GbE uplinks and up to 740 W PoE+
Software-defined ready with REST APIs and OpenFlow support
Simple deployment with Zero Touch Provisioning
A powerful Aruba ProVision ASIC delivers performance , robust feature support and value with programmability for the latest applications. Stacking with Virtual Switching Framework (VSF) provides simplicity and scalability. The 2930F supports built-in 1GbE or 10GbE uplinks, PoE+, Access OSPF routing, Dynamic Segmentation, robust QoS, RIP routing, and IPv6 with no software licensing required. The Aruba 2930F Switch Series provides a convenient and cost-effective access switch solution that can be quickly set up with Zero Touch Provisioning. The robust Layer 3 feature set includes a limited lifetime warranty.

Aruba 2930F 24G 4Sfp+ Switch (JL253A)The Aruba 2930F 24G 4Sfp+ Switch is designed for customers creating smart digital workplaces that are optimized for mobile users with an integrated wired and wireless approach. These convenient Layer 3 network switches include built-in uplinks and power so are simple to deploy and manage with advanced security and network management tools like Aruba ClearPass Policy Manager, Aruba AirWave and cloud-based Aruba Central.

Aruba 2930F Key Features

Aruba Layer 3 switch series with VSF stacking, static, RIP and Access OSPF Routing, Dynamic Segmentation, ACLs, and robust QoS
Supports advanced security and network management via Aruba ClearPass Policy Manager, Aruba AirWave and Aruba Central
Convenient built-in 1GbE or 10GbE uplinks and up to 740 W PoE+
Software-defined ready with REST APIs and OpenFlow support
Simple deployment with Zero Touch Provisioning
A powerful Aruba ProVision ASIC delivers performance, robust feature support and value with programmability for the latest applications. Stacking with Virtual Switching Framework (VSF) provides simplicity and scalability. The 2930F supports built-in 1GbE or 10GbE uplinks, PoE+, Access OSPF routing, Dynamic Segmentation, robust QoS, RIP routing, and IPv6 with no software licensing required. The Aruba 2930F Switch Series provides a convenient and cost-effective access switch solution that can be quickly set up with Zero Touch Provisioning. The robust Layer 3 feature set includes a limited lifetime warranty.

Aruba 2930F 24G Poe+ 4Sfp Switch - 24 Ports - L3 - ManagedThe Aruba 2930F 24G Poe+ 4Sfp Switch - 24 Ports - L3 - Managed  is designed for customers creating smart digital workplaces that are optimized for mobile users with an integrated wired and wireless approach. These convenient Layer 3 network switches include built-in uplinks and power so are simple to deploy and manage with advanced security and network management tools like Aruba ClearPass Policy Manager, Aruba AirWave and cloud-based Aruba Central.

Aruba 2930F Key Features

Aruba Layer 3 switch series with VSF stacking, static, RIP and Access OSPF Routing, Dynamic Segmentation, ACLs, and robust QoS
Supports advanced security and network management via Aruba ClearPass Policy Manager, Aruba AirWave and Aruba Central
Convenient built-in 1GbE or 10GbE uplinks and up to 740 W PoE+
Software-defined ready with REST APIs and OpenFlow support
Simple deployment with Zero Touch Provisioning
A powerful Aruba ProVision ASIC delivers performance, robust feature support and value with programmability for the latest applications. Stacking with Virtual Switching Framework (VSF) provides simplicity and scalability. The 2930F supports built-in 1GbE or 10GbE uplinks, PoE+, Access OSPF routing, Dynamic Segmentation, robust QoS, RIP routing, and IPv6 with no software licensing required. The Aruba 2930F Switch Series provides a convenient and cost-effective access switch solution that can be quickly set up with Zero Touch Provisioning. The robust Layer 3 feature set includes a limited lifetime warranty.

Aruba 2930F 24G PoE+ 4SFP+ Switch (JL255A)The Aruba 2930F 24G PoE+ 4SFP+ Switch (JL255A) is a switch that is designed for customers creating digital workplaces that are optimized for mobile users with an integrated wired and wireless approach. These Layer 3 access switches are easy to deploy and manage with advanced security and network management tools like Aruba ClearPass Policy Manager and Aruba AirWave. With support from Aruba Central, you can quickly set up remote branch sites with little or no IT support. A powerful Aruba ProVision ASIC delivers performance and flexibility to meet the needs of today and tomorrow’s network programmability and automation requirements. Stacking with Virtual Switching Framework (VSF) provides simplicity and scalability. The 2930F supports built-in 1GbE or 10GbE uplinks, PoE+, Access OSPF routing, Dynamic Segmentation, robust QoS, RIP routing, and IPv6 with no software licensing required.

Aruba 2930F 24G PoE+ 4SFP+ Switch (JL255A) Key Features

Aruba Layer 3 switch series with VSF stacking, static, Rip and Access OSPF Routing, Dynamic Segmentation, ACLs, and robust QoS
Consistent wired/wireless experience with Aruba AirWave and Aruba ClearPass Policy Manager
Convenient built-in 1GbE or 10GbE uplinks and up to 740 W PoE+
Ready for the software defined network with REST APIs and OpenFlow support
Simple deployment with Zero Touch Provisioning and cloud-based Aruba Central support
The Aruba 2930F Switch Series provides a convenient and cost- effective access switch solution that can be quickly set up with Zero Touch Provisioning and built-in 10GbE uplinks. The robust Layer 3 feature set includes a limited lifetime warranty.

The Aruba 2930M Switch Series is designed for digital workplaces optimised for mobile users.

These Layer 3 access switches are easy to deploy and manage with advanced security and network management tools like Aruba ClearPass Policy Manager, Aruba AirWave and cloud-based Aruba Central.

Modular stacking, uplinks and power provide scalability and simplicity for enterprise edge, SMB and branch offices.

The 2930M delivers performance and value with support for static, RIP and Access OSPF routing, 10GbE and 40GbE uplinks, robust QoS, SDN and requires no software licensing.

Key Features

Aruba Layer 3 Switch with 10 chassis backplane stacking, static, RIP and access OSPF routing, Tunnel Node, ACLs, SDN, and robust QoS
Advanced security and network management tools like Aruba ClearPass Policy Manager, Aruba AirWave and Aruba Central
Modular 10GbE or 40GbE uplink Support
Ready for the software defined network with REST APIs and OpenFlow support
Simple deployment with Zero Touch Provisioning
Features

The Aruba 2930M Switch Series provides performance, security, and ease of use for enterprise edge, SMB, and branch office networks.
The Aruba 2930M Switch Series is designed with a powerful Aruba ProVision ASIC, to enable the mobile campus with low latency, increased packet buffering, and adaptive power consumption.
The Aruba 2930M Switch Series includes security and quality of services (QoS) features to build a network that meets ever-changing corporate policies and compliance's while protecting your data from both inside and outside attacks.
The Aruba 2930M Switch Series supports Aruba ClearPass Policy Manager for unified and consistent policy between wired and wireless users and simplifies implementation and management of guest login, user onboarding, network access, security, QoS, and other network policies.


Additional Ports and Slots

1 Dual Personality (RJ-45 or USB Micro-B) serial console port
1 USB B port for uploading/downloading files
1 100BASE-T Out of Band Management Port
1 Uplink Slot
1 Stacking Module Slot
2 Power Supply Slots (power supplies not included)

The Aruba 2930M Switch Series is designed for digital workplaces optimized for mobile users. These Layer 3 access switches are easy to deploy and manage with advanced security and network management tools like Aruba ClearPass Policy Manager, Aruba AirWave and cloud-based Aruba Central. Modular stacking, uplinks and power provide scalability and simplicity for enterprise edge, SMB and branch offices. The 2930M delivers performance and value with support for static, RIP and Access OSPF routing, 10GbE and 40GbE uplinks, models with 24 ports of HPE Smart Rate multi-gigabit Ethernet, up to 740W of PoE+, robust QoS, SDN and requires no software licensing.

Key Features: Aruba Layer 3 Switch with 10 chassis backplane stacking, static, RIP and access OSPF routing, Tunnel Node, ACLs, SDN, and robust QoS
Advanced security and network management tools like Aruba ClearPass Policy Manager, Aruba AirWave and Aruba Central
Modular 10GbE or 40GbE uplinks and HPE Smart Rate (IEEE 802.3bz), up to 740W PoE+
Ready for the software defined network with REST APIs and OpenFlow support
Simple deployment with Zero Touch Provisioning

HPE Aruba 2930M 24G PoE+: 20 Autosensing 10/100/1000 PoE+ ports
Dual Personality 10/100/1000 BASE-T PoE+ or 100/1000 Mbps SFP Ports
Features:

The Aruba 2930M Switch Series provides performance, security, and ease of use for enterprise edge, SMB, and branch office networks.
The Aruba 2930M Switch Series is designed with a powerful Aruba ProVision ASIC, to enable the mobile campus with low latency, increased packet buffering, and adaptive power consumption.
The Aruba 2930M Switch Series includes security and quality of services (QoS) features to build a network that meets ever-changing corporate policies and compliance's while protecting your data from both inside and outside attacks.
The Aruba 2930M Switch Series supports Aruba ClearPass Policy Manager for unified and consistent policy between wired and wireless users and simplifies implementation and management of guest login, user onboarding, network access, security, QoS, and other network policies.
Option of dual
Power Supplies Stacking Module
Slot Uplink Slot Additional Ports and Slots

1 Dual Personality (RJ-45 or USB Micro-B) serial console port
1 USB B port for uploading/ downloading files
1 100BASE-T Out of Band Management Port
1 Uplink Slot
1 Stacking Module Slot
2 Power Supply Slots (power supplies not included)


JL319A
2930M 24G
JL320A
2930M 24G PoE+  JL324A
2930M 24 HPE Smart Rate PoE
Ports 20 Autosensing 10/100/1000 ports 20 Autosensing 10/100/1000 ports 24 Autosensing 1/2.5/5GBaseT ports Switching Capacity 128 Gbps 128 Gbps 320 Gbps Switching Capacity (Including Stacking 128 Gbps 228 Gbps 420 Gbps Throughput 95.2 Gbps 95.2 Gbps 112 Gbps Predominant Port Type 1 GbE Gigabit Copper 1 GbE Gigabit Copper 1/2.5/5GBaseT Port Count 24 24 24 Uplink Speed/Media 4 Combo 10/100/1000BASE-T or 100/1000 Mbps SFP Ports Dual Personality 10/100/1000 BASE-T PoE+ or 100/1000 Mbps SFP Ports N/A PoE/PoE+ Ports N/A 24 PoE+ 24 PoE+ PoE Power (Max Possible) N/A 740 Watts 860 Watts Management Managed Functionality Layer 3 Dynamic Dimensions 44.25(w) x 32.43(d) x 4.39(h) cm

The Aruba 2930M Switch Series is designed for digital workplaces optimized for mobile users. These Layer 3 access switches are easy to deploy and manage with advanced security and network management tools like Aruba ClearPass Policy Manager, Aruba AirWave and cloud-based Aruba Central. Modular stacking, uplinks and power provide scalability and simplicity for enterprise edge, SMB and branch offices. The 2930M delivers performance and value with support for static, RIP and Access OSPF routing, 10GbE and 40GbE uplinks, models with 24 ports of HPE Smart Rate multi-gigabit Ethernet, up to 860W of PoE+, robust QoS, SDN and requires no software licensing.

Key Features: Aruba Layer 3 Switch with 10 chassis backplane stacking, static, RIP and access OSPF routing, Tunnel Node, ACLs, SDN, and robust QoS
Advanced security and network management tools like Aruba ClearPass Policy Manager, Aruba AirWave and Aruba Central
Modular 10GbE or 40GbE uplinks and HPE Smart Rate (IEEE 802.3bz), up to 860W PoE+
24 ports of HPE Smart Rate with IEEE 802.3bz
Ready for the software defined network with REST APIs and OpenFlow support
Simple deployment with Zero Touch Provisioning

24 HPE Smart Rate PoE+ 1-slot Switch: 
24 Autosensing 1/2.5/5GBaseT ports PoE+
Features:

The Aruba 2930M Switch Series provides performance, security, and ease of use for enterprise edge, SMB, and branch office networks.
The Aruba 2930M Switch Series is designed with a powerful Aruba ProVision ASIC, to enable the mobile campus with low latency, increased packet buffering, and adaptive power consumption.
The Aruba 2930M Switch Series includes security and quality of services (QoS) features to build a network that meets ever-changing corporate policies and compliance's while protecting your data from both inside and outside attacks.
The Aruba 2930M Switch Series supports Aruba ClearPass Policy Manager for unified and consistent policy between wired and wireless users and simplifies implementation and management of guest login, user onboarding, network access, security, QoS, and other network policies.
Option of dual
Power Supplies Stacking Module
Slot Uplink Slot
Additional Ports and Slots

1 Dual Personality (RJ-45 or USB Micro-B) serial console port
1 USB B port for uploading/ downloading files
1 100BASE-T Out of Band Management Port
1 Uplink Slot
1 Stacking Module Slot
2 Power Supply Slots (power supplies not included)


JL319A
2930M 24G
JL320A
2930M 24G PoE+  JL324A
2930M 24 HPE Smart Rate PoE
Ports 20 Autosensing 10/100/1000 ports 20 Autosensing 10/100/1000 ports 24 Autosensing 1/2.5/5GBaseT ports Switching Capacity 128 Gbps 128 Gbps 320 Gbps Switching Capacity (Including Stacking 128 Gbps 228 Gbps 420 Gbps Throughput 95.2 Gbps 95.2 Gbps 112 Gbps Predominant Port Type 1 GbE Gigabit Copper 1 GbE Gigabit Copper 1/2.5/5GBaseT Port Count 24 24 24 Uplink Speed/Media 4 Combo 10/100/1000BASE-T or 100/1000 Mbps SFP Ports Dual Personality 10/100/1000 BASE-T PoE+ or 100/1000 Mbps SFP Ports N/A PoE/PoE+ Ports N/A 24 PoE+ 24 PoE+ PoE Power (Max Possible) N/A 740 Watts 860 Watts Management Managed Functionality Layer 3 Dynamic Dimensions 44.25(w) x 32.43(d) x 4.39(h) cm

The Aruba 3810 Switch Series provides performance and resiliency for enterprises, SMBs, and branch office networks. With HPE Smart Rate multi-gigabit ports for high-speed 802.11ac devices, this advanced Layer 3 switch delivers a better application experience with low latency, virtualisation with resilient stacking technology, and line rate 40GbE for plenty of back haul capacity. The Aruba 3810 is easy to deploy and manage with advanced security and network management tools like Aruba ClearPass Policy Manager, Aruba AirWave and cloud-based Aruba Central.

Expandable high-end campus access switch with 24x Gigabit PoE+ ports and an open module slot for more high speed connections.
This model has 24x 10/100/1000 PoE+ ports together with 1x open module slots and a stacking module slot. Power supplies are ordered separately. When matched with the correct dual power supplies, supports up to 840W of PoE+ power across 48 ports.

(24) RJ-45 autosensing 10/100/1000 PoE+ ports
Ports 1 - 24 support MACSec
(1) open module slot
Supports a maximum of 4 SFP+ ports or 1 40GbE ports, with optional module

Features:

The Aruba 3810 Switch Series is an industry leading mobile campus access solution for enterprises, SMBs, and branch office networks. With HPE Smart Rate multi-gigabit ports for high speed 802.11ac devices, the Aruba 3810 will prepare your network for tomorrow.
The Aruba 3810 Switch Series is designed with a ProVision ASIC designed to enable the mobile campus with very low latency, increased packet buffering, and adaptive power consumption. The Aruba 3810 Switch Series includes robust security and quality of services features to build a mobile campus network that meets corporate policies and compliance requirements.
The Aruba 3810 Switch Series supports Aruba ClearPass Policy Manager to provide unified and consistent policy between wired and wireless users. Simplified implementation and management of guest login, user onboarding, network access, security, QoS, and other network policies on the network.


Performance and Power for the Digital Workplace The Aruba 3810 Switch Series is an industry leading mobile campus access solution for enterprises, SMBs, and branch office networks. With HPE Smart Rate multi-gigabit ports for high speed 802.11ac devices, the Aruba 3810 will prepare your network for tomorrow.

HPE Smart Rate ports support multi-gigabit Ethernet speeds (1, 2.5, 5, and 10 gigabit Ethernet) on existing cabling for cost-effective and convenient network upgrades with no rip and replace of cabling.

Optimised for the digital workplace with unified management and security tools such as Aruba ClearPass Policy Manager, Aruba Airwave and Aruba Central. Provides optimal configuration automatically when connected to Aruba access points for PoE priority, VLAN configuration, and rogue AP containment.

Rightsizes deployment and back haul capacity with modular 10GbE and 40GbE uplinks. Full PoE+ provisioning on 48-ports. Dual, redundant, hot-swappable power supplies and innovative backplane stacking technology delivers resiliency and scalability in a convenient 1U form factor.

Advanced Layer 2 and 3 feature set with OSPF, IPv6, IPv4 BGP, robust QoS and policy-based routing are included with no software licensing. Built-in programmable and easy to use REST API interface provides configuration automation for Mobile-first campus networks.


Resiliency and High Availability You Can Depend On The Aruba 3810 Switch Series is designed with a ProVision ASIC designed to enable the mobile campus with very low latency, increased packet buffering, and adaptive power consumption.

Backplane stacking technology delivers high-performance stacking with up to 336 Gb/s of stacking throughput and increased resiliency. Up to ten Aruba 3810 switches can be stacked in a ring topology or up to five can be stacking in a mesh topology.

Dual hot-swappable power supplies provide power and allow swapping of modules on the fly to reduce impact on the network availability. More performance with selectable queue configurations and associated memory buffering that best meets requirements of prioritised network applications.

Selectable queue configurations enables increased performance by selecting the number of queues and associated memory buffering that best meet the requirements of the network applications.

Uninterrupted switching and routing for improved application experience and enhanced L3 availability. Supports virtual router redundancy protocol (VRRP) allowing groups of two routers to dynamically back each other up to create highly available router environments in both IPv4 and IPv6 networks.


Trusted Security with Unmatched Quality of Service The Aruba 3810 Switch Series includes robust security and quality of services features to build a mobile campus network that meets corporate policies and compliance requirements.

Flexible traffic controls, such as policy-based routing, QoS, and ACLs, to manage end-to-end application priorities for improved user experience.

Enhanced security and policy-driven application authentication with concurrent 802.1X, MAC and Web Authentication modes. Prevent unwanted traffic with advanced distributed denial of service (DDOS) protection, such as DHCP Snooping, IP Source Guard, and ARP Protection.

Powerful multilevel-access security controls, such as role-based management, configurable password complexity, RADIUS/TACACS+, and SSH for improved security and control change management access.

Tunneled Node to transport network traffic on a per-port basis to Aruba controller with authentication and network policies applied and enforced at the controller. Industry standard MACsec provides switch-to-switch link level security.


Simplify with Unified Management The Aruba 3810 Switch Series supports Aruba ClearPass Policy Manager to provide unified and consistent policy between wired and wireless users. Simplified implementation and management of guest login, user onboarding, network access, security, QoS, and other network policies on the network.

Supports Aruba AirWave and cloud-based Aruba Central to provide common platform for zero-touch provisioning, management, and monitoring for wired and wireless network devices.

Supports both cloud-based Central and on-premise AirWave with the same hardware ensuring change of management platform without ripping and replacing switching infrastructure.

RMON, XRMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events.

Out-of-band Ethernet management port keeps management traffic segmented from your network data traffic.

The Aruba 3810 Switch Series - Aruba JL430A 3810M 24SFP+ 250W Switch provides performance and resiliency for enterprises, SMBs, and branch office networks. With HPE Smart Rate multi-gigabit ports for high-speed 802.11ac devices, this advanced Layer 3 switch is SDN optimized and delivers a better application experience with low latency, virtualization with resilient stacking technology, and line rate 40GbE for plenty of back haul capacity. The Aruba 3810 is easy to deploy and manage with advanced security and network management tools like Aruba ClearPass Policy Manager, Aruba AirWave and cloud-based Aruba Central.

Aruba CX 6000 Switch Series Just right for branch offices, mid-market enterprises, and SMBs The CX 6000 switches bring simplicity, reliability, and value to the access layer.

Main Features

Simplify IT operations with modern Layer 2 Gigabit Ethernet switch series that provides entry level, reliable, and convenient wired access connectivity.
Convenient built-in 1GbE uplinks and up to 370W of Class 4 PoE for support of access points, client, and IoT devices.
Compact and fanless 12 port PoE model for space-constrained deployments.
Flexibility to manage with Aruba Central, easy to use Web GUI, CLI, or Aruba NetEdit.
Software defined ready with REST APIs.
HPE Limited Lifetime Warranty with no switch software licensing required.
Simple, secure, and reliable This enterprise-class Layer 2 switch series is ready for quick deployment with plenty of PoE, speed, and robust security features to safely connect and power your access points, client devices, and IoT.

Right size for your business Deploy the number of Ethernet ports and PoE power that’s best for you and your budget with plug and play 12-, 24-, and 48-port Ethernet models with up to 370W PoE.

Manage it your way No matter how big or small your network management needs, the CX 6000 has you covered with choices that include easy-to-use Web GUI, CLI, Aruba NetEdit, and Aruba Central (available soon) for single pane of glass management across your enterprise network.

Product Specification

Ports 24x 10/100/1000Base-T ports
4x 1G SFP ports Power Supply Internal (fixed) power supply, fixed fans PoE Budget Up to 370W of Class 4 PoE Dimensions (H) 4.39 cm x (W) 44.2 cm x (D) 26.82 cm (1.73" x 17.4" x 10.56") Weight 4.19 kg (9.24 lbs) Performance System Switching Capacity: Up to 104 Gbps
System Throughput Capacity: Up to 77.3 Mpps Management ports 1x USB-C console port
1x USB Type-A host port Mounting Mounts in an EIA-standard 19 in. Telco rack or equipment cabinet. Horizontal surface mounting only. 2-post rack kit included. Environmental Operating temperature: 32°F to 113°F (0°C to 45°C) up to 5,000 ft. Derate -1°C degree C for every 1,000 ft. from 5,000 ft. to 10,000 ft.
Operating Relative Humidity: 15% to 95% @ 104°F (40°C) noncondensing
Non-Operating: -40°F to 158°F (-40°C to 70°C) up to 15,000 ft.
Non-Operating Storage relative humidity: 15% to 90% @ 149°F (65°C) noncondensing
Max. Operating Altitude: 10,000 feet (3.04 km)
Max Non-operating Altitude: 15,000 feet (4.6 km)

Acoustics:
Sound Power (LWAd) range: 0 - 4.3 Bel
Sound Pressure (LpAm) (Bystander) range: 0 - 29.8 dB Electrical characteristics Frequency range: 50-60 Hz
AC Voltage: 100-240 volts
Maximum current range: 4.91A - 0.5A Safety UL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60825-1; UL 62368-1 Ed. 2; IEC 62368-1 Ed. 2; EN 62368-1:2014 Emissions VCCI-CISPR 32, Class A; CNS 13438; ICES-003 Issue 6 Class A; FCC CFR 47 Part 15, Class A; EN 55032: 2015 +AC:2016 /CISPR-32, Class A Immunity Generic: CISPR 24 / CISPR 35
EN: EN 55024:2010 / EN 55035:2017
ESD: IEC 61000-4-2
Radiated: IEC 61000-4-3
EFT/Burst: IEC 61000-4-4
Surge: IEC 61000-4-5
Conducted Immunity: IEC 61000-4-6
Power frequency magnetic field: IEC 61000-4-8
Voltage dips and interruptions: IEC 61000-4-11
Harmonics: IEC/EN 61000-3-2
Flicker: IEC/EN 61000-3-3

Aruba CX 6000 Switch Series Just right for branch offices, mid-market enterprises, and SMBs The CX 6000 switches bring simplicity, reliability, and value to the access layer.

Main Features

Simplify IT operations with modern Layer 2 Gigabit Ethernet switch series that provides entry level, reliable, and convenient wired access connectivity.
Convenient built-in 1GbE uplinks and up to 370W of Class 4 PoE for support of access points, client, and IoT devices.
Compact and fanless 12 port PoE model for space-constrained deployments.
Flexibility to manage with Aruba Central, easy to use Web GUI, CLI, or Aruba NetEdit.
Software defined ready with REST APIs.
HPE Limited Lifetime Warranty with no switch software licensing required.
Simple, secure, and reliable This enterprise-class Layer 2 switch series is ready for quick deployment with plenty of PoE, speed, and robust security features to safely connect and power your access points, client devices, and IoT.

Right size for your business Deploy the number of Ethernet ports and PoE power that’s best for you and your budget with plug and play 12-, 24-, and 48-port Ethernet models with up to 370W PoE.

Manage it your way No matter how big or small your network management needs, the CX 6000 has you covered with choices that include easy-to-use Web GUI, CLI, Aruba NetEdit, and Aruba Central (available soon) for single pane of glass management across your enterprise network.

Product Specification

Ports 24x ports 10/100/1000Base-T ports
4x 1G SFP ports Power Supply Internal (fixed) power supply, fixed fans Dimensions (H) 4.39 cm x (W) 44.2 cm x (D) 20.12 cm (1.73" x 17.4" x 7.92") Weight 2.62 kg (5.78 lbs) Performance System Switching Capacity: Up to 104 Gbps
System Throughput Capacity: Up to 77.3 Mpps Management ports 1x USB-C console port
1x USB Type-A host port Mounting Mounts in an EIA-standard 19 in. Telco rack or equipment cabinet. Horizontal surface mounting only. 2-post rack kit included. Environmental Operating temperature: 32°F to 113°F (0°C to 45°C) up to 5,000 ft. Derate -1°C degree C for every 1,000 ft. from 5,000 ft. to 10,000 ft.
Operating Relative Humidity: 15% to 95% @ 104°F (40°C) noncondensing
Non-Operating: -40°F to 158°F (-40°C to 70°C) up to 15,000 ft.
Non-Operating Storage relative humidity: 15% to 90% @ 149°F (65°C) noncondensing
Max. Operating Altitude: 10,000 feet (3.04 km)
Max Non-operating Altitude: 15,000 feet (4.6 km)

Acoustics:
Sound Power (LWAd) range: 0 - 4.3 Bel
Sound Pressure (LpAm) (Bystander) range: 0 - 29.8 dB Electrical characteristics Frequency range: 50-60 Hz
AC Voltage: 100-240 volts
Maximum current range: 4.91A - 0.5A Safety UL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60825-1; UL 62368-1 Ed. 2; IEC 62368-1 Ed. 2; EN 62368-1:2014 Emissions VCCI-CISPR 32, Class A; CNS 13438; ICES-003 Issue 6 Class A; FCC CFR 47 Part 15, Class A; EN 55032: 2015 +AC:2016 /CISPR-32, Class A Immunity Generic: CISPR 24 / CISPR 35
EN: EN 55024:2010 / EN 55035:2017
ESD: IEC 61000-4-2
Radiated: IEC 61000-4-3
EFT/Burst: IEC 61000-4-4
Surge: IEC 61000-4-5
Conducted Immunity: IEC 61000-4-6
Power frequency magnetic field: IEC 61000-4-8
Voltage dips and interruptions: IEC 61000-4-11
Harmonics: IEC/EN 61000-3-2
Flicker: IEC/EN 61000-3-3

The Aruba Instant On 1830 24G 2SFP Switch (JL812A) provides an easy to use and affordable wired solution for networks supporting IT, mobile, and cloud applications. This affordable and easy-to-deploy smart-managed switch series is ideal for small businesses?looking for cost-effective wired infrastructure to keep up?with evolving network demands.?

These entry-level, smart-managed switches?offer?Layer 2 switching capabilities,?Gigabit connectivity, along with flexible management modes - all at an affordable price point. With a flexible management dashboard, Power over Ethernet (PoE) options, and energy-efficient features, these switches deliver a solid business network for SMBs with limited budgets.

Aruba Instant On 1830 An affordable solution for cost-sensitive small businesses. The Aruba Instant On 1830 Switch Series is an affordable, easy-to-use, smart-managed switch solution for small businesses looking for cost-effective ways to keep up with evolving networking demands.

Main Features

Fast 802.11ax, 2X2:2
Wi-Fi Certified 6™ (Wi-Fi 6)
MU-MIMO performance
Smart Mesh Wi-Fi support
Built-in Wi-Fi router/gateway functionality
Integrated Bluetooth
Easy-to-use web and mobile app for setup and management
Secure Guest Wi-Fi with simple setup
Application classification, control and visibility
Product Specification

Gigabit Copper Ports 24 Uplinks 2 SFP 1GbE ports Dimensions 215.9(D) x 443.0(W) x 43.9(H) mm Weight 5.50 lb (2.49 kg) Throughput (Mpps) 38.68 Mpps Switching capacity 52 Gbps Reliability MTBF (years) 203.6 Maximum power rating 100-127V: 19.1W
200-220V: 19W Warranty Limited Lifetime Warranty Perfect For:

Home Office

Coffee Shop

Tech Start-Ups

Dental Offices

Aruba Instant On 1830 has all the features you need right out of the box

Power over Ethernet (PoE) support

The 1830 Switch Series is ready to deploy in 8-, 24-, and 48-port for non-PoE and Class 4 PoE models. Up to 30 W PoE power delivery is available for Class 4 PoE devices. With PoE and non-PoE ports supported in the same PoE model, these switches are ideal for the most cost-efficient environments.

Flexible management options

Easily deploy and manage 1830 switches using two management modes - Instant On cloud management (access via mobile app and/or web portal) or the local web GUI.

Integrated security features

Prevent unauthorized access and protect your business data with advanced security features like VLANs, automatic Denial-of-service protection, Global Storm Control, TPM (Trusted Platform module) based security and more.

Optimal energy efficiency

Cut operating costs and reduce your environmental footprint with 1830 switches. Energy Efficient Ethernet (IEEE 802.3az), auto-port shutdown, energy-efficient cooling support and fanless design all help maintain operating temperatures, reducing excess noise and power consumption.

SFP fibre connectivity

Two (2) and four (4) dedicated 1G SFP fiber ports on 24- and 48-port models respectively eliminate traffic bottlenecks across your network. Fiber connectivity provides higher uplink bandwidth and performance across longer distances than copper cabling can support.

PoE Powered Device (PD) enabled

Simplify deployments in hard-to-wire areas by the PD powered 8-port non-PoE model that can be powered from an external PoE switch or an external injector, offering greater flexibility for space-constrained environments by eliminating the need for additional power outlets and wiring.

This Model Includes:

Limited Lifetime Warranty

24/7 Phone/Chat Support

Instant On Community

Aruba Instant On 1830 An affordable solution for cost-sensitive small businesses. The Aruba Instant On 1830 Switch Series is an affordable, easy-to-use, smart-managed switch solution for small businesses looking for cost-effective ways to keep up with evolving networking demands.

Main Features

Fast 802.11ax, 2X2:2
Wi-Fi Certified 6™ (Wi-Fi 6)
MU-MIMO performance
Smart Mesh Wi-Fi support
Built-in Wi-Fi router/gateway functionality
Integrated Bluetooth
Easy-to-use web and mobile app for setup and management
Secure Guest Wi-Fi with simple setup
Application classification, control and visibility
Product Specification

Gigabit Copper Ports 24; Class 4 (ports 1 -12) Uplinks 2 SFP 1GbE ports Dimensions 253.0(D) x 443.0(W) x 43.9(H) mm Weight 7.65 lb (3.47 kg) Throughput (Mpps) 38.68 Mpps Switching capacity 52 Gbps Reliability MTBF (years) 96.6 Maximum power rating 100-127V: 244.6W
200-220V: 237.2W Warranty Limited Lifetime Warranty Perfect For:

Home Office

Coffee Shop

Tech Start-Ups

Dental Offices

Aruba Instant On 1830 has all the features you need right out of the box

Power over Ethernet (PoE) support

The 1830 Switch Series is ready to deploy in 8-, 24-, and 48-port for non-PoE and Class 4 PoE models. Up to 30 W PoE power delivery is available for Class 4 PoE devices. With PoE and non-PoE ports supported in the same PoE model, these switches are ideal for the most cost-efficient environments.

Flexible management options

Easily deploy and manage 1830 switches using two management modes - Instant On cloud management (access via mobile app and/or web portal) or the local web GUI.

Integrated security features

Prevent unauthorized access and protect your business data with advanced security features like VLANs, automatic Denial-of-service protection, Global Storm Control, TPM (Trusted Platform module) based security and more.

Optimal energy efficiency

Cut operating costs and reduce your environmental footprint with 1830 switches. Energy Efficient Ethernet (IEEE 802.3az), auto-port shutdown, energy-efficient cooling support and fanless design all help maintain operating temperatures, reducing excess noise and power consumption.

SFP fibre connectivity

Two (2) and four (4) dedicated 1G SFP fiber ports on 24- and 48-port models respectively eliminate traffic bottlenecks across your network. Fiber connectivity provides higher uplink bandwidth and performance across longer distances than copper cabling can support.

PoE Powered Device (PD) enabled

Simplify deployments in hard-to-wire areas by the PD powered 8-port non-PoE model that can be powered from an external PoE switch or an external injector, offering greater flexibility for space-constrained environments by eliminating the need for additional power outlets and wiring.

This Model Includes:

Limited Lifetime Warranty

24/7 Phone/Chat Support

Instant On Community

Smart and scalable

Aruba Instant On 1960 Switch Series are advanced, smart-managed, stackable Gigabit switches for growing businesses needing the highest performance to support bandwidth-demanding applications.

Aruba Instant On 1960 - JL806A Features

24 10/100/1000 ports, 2 SFP+ 10GbE ports and 2 10GBASE-T ports
95 Mpps Throughput Capacity
128 GB Switching capacity
123.0 Reliability MTBF (years)
Dimensions: 350.5(D) x 442.5(W) x 43.95(H) mm
Weight: 8.7 lb (3.9 kg)
Limited Lifetime Warranty
Perfect For:

Training Centres

Medical Clinics

Hospitality

Tech Start-Ups

The Aruba Instant On 1960 has the features you want for high-density environments

High-performance 10 gig connectivity

For environments with heavy bandwidth needs, 10GBase-T and SFP+ uplink ports deliver lightning-fast network speeds and eliminate traffic bottlenecks. 24 and 48-port Gigabit (PoE and non-PoE) models and a 12-port aggregation switch provide options for both flexible and affordable deployment.

Stack up to four (4) 1960 switches

Simplify network management by stacking up to (four) 4 1960 (access and aggregation) switches and managing them through a single management interface. You get up to 288 ports, including 16 10G uplink ports, for high-density environments, as well as flexibility for future network expansion.

Easy to use cloud-managed stacking

In a few simple steps, set up and configure a stack with the Aruba Instant On mobile app. You can manage the stack and ports remotely, and you’ll minimize network downtime - if the master switch within 1960 Series stack fails, another switch takes over, keeping your network up and running.

Future-proof your network

Advanced switching capabilities like Layer 3 IPv4, IPV6 static routing, ACLs, and Spanning Tree Protocols support apps and devices you have today, as well as those you may add in the future. And True Stacking makes it easy to configure, manage, and troubleshoot physical switches as one single entity, helping scale the network as your business grows.

PoE Over Ethernet (PoE) support

The 1960 switches support Class 4 and Class 6 PoE on selected ports. Up to 30 W PoE power delivery is available for Class 4 PoE devices like access points, surveillance cameras and VoIP phones, and up to 60 W PoE power delivery is available for Class 6 PoE devices like pan-tilt zoom cameras and video enabled IP-phones.

Robust security

Protect your business data and keep unauthorized users off the network with advanced security features like IEEE 802.1X, MAC authentication, VLANs, Network Access Control (ACL), Port Security, DHCP snooping, ARP attack prevention and RADIUS authentication.

This Model Includes:

Limited Lifetime Warranty

24/7 Phone and Chat Support

Instant On Community

Smart and scalable

Aruba Instant On 1960 Switch Series are advanced, smart-managed, stackable Gigabit switches for growing businesses needing the highest performance to support bandwidth-demanding applications.

Aruba Instant On 1960 - JL806A Features

24 10/100/1000 PoE ports, 2 SFP+ 10GbE ports and 2 10GBASE-T ports
Total 370 W PoE Power (Up to 240 W of Class 6 or 370 W of Class 4 PoE)
95 Mpps Throughput Capacity
128 GB Switching capacity
65.3 Reliability MTBF (years)
Dimensions: 350.5(D) x 442.5(W) x 43.95(H) mm
Weight: 8.7 lb (3.9 kg)
Limited Lifetime Warranty
Perfect For:

Training Centres

Medical Clinics

Hospitality

Tech Start-Ups

The Aruba Instant On 1960 has the features you want for high-density environments

High-performance 10 gig connectivity

For environments with heavy bandwidth needs, 10GBase-T and SFP+ uplink ports deliver lightning-fast network speeds and eliminate traffic bottlenecks. 24 and 48-port Gigabit (PoE and non-PoE) models and a 12-port aggregation switch provide options for both flexible and affordable deployment.

Stack up to four (4) 1960 switches

Simplify network management by stacking up to (four) 4 1960 (access and aggregation) switches and managing them through a single management interface. You get up to 288 ports, including 16 10G uplink ports, for high-density environments, as well as flexibility for future network expansion.

Easy to use cloud-managed stacking

In a few simple steps, set up and configure a stack with the Aruba Instant On mobile app. You can manage the stack and ports remotely, and you’ll minimize network downtime - if the master switch within 1960 Series stack fails, another switch takes over, keeping your network up and running.

Future-proof your network

Advanced switching capabilities like Layer 3 IPv4, IPV6 static routing, ACLs, and Spanning Tree Protocols support apps and devices you have today, as well as those you may add in the future. And True Stacking makes it easy to configure, manage, and troubleshoot physical switches as one single entity, helping scale the network as your business grows.

PoE Over Ethernet (PoE) support

The 1960 switches support Class 4 and Class 6 PoE on selected ports. Up to 30 W PoE power delivery is available for Class 4 PoE devices like access points, surveillance cameras and VoIP phones, and up to 60 W PoE power delivery is available for Class 6 PoE devices like pan-tilt zoom cameras and video enabled IP-phones.

Robust security

Protect your business data and keep unauthorized users off the network with advanced security features like IEEE 802.1X, MAC authentication, VLANs, Network Access Control (ACL), Port Security, DHCP snooping, ARP attack prevention and RADIUS authentication.

This Model Includes:

Limited Lifetime Warranty

24/7 Phone and Chat Support

Instant On Community