D-Link DGS-3130-30PS/SI

The all-new DGS-3130 Series Gigabit Layer 3 Stackable Managed Switches are designed to address the needs of small to medium-sized business networks. A unified software image incorporates L2 and L3 features enabling the family to be deployed in a variety of environments and topologies. Together the hardware and software enhancements combine to create a family of powerful, flexible and cost-effective switches.

The DGS-3130-30PS switch has 24 PoE+ gigabit ports with six embedded 10G uplink/stacking ports. Two 10GBASE-T ports and four 10G SFP+ ports.

Features:

• Redundant power supply (RPS) support
• Ethernet Ring Protection Switching (ERPS) for single ring topologies
• Embedded 6 kV surge protection on all Gigabit Ethernet ports
• IEEE 802.3D/802.1s Spanning Tree
• Loopback Detection (LBD)

• Static Route
• RIP
• RIPng

DGS-3130-30PS: 24 x 10/100/1000BASE-T PoE Ports
2 x 10GBASE-T
4 x 10G SFP+

Optional Accessories

DEM-431XT	SFP+ 10GBASE-SR Multi-Mode Fibre Transceiver (300m)
DEM-432XT	SFP+ 10GBASE-LR Multi-Mode Fibre Transceiver (10 km)
DEM-CB100S	1mt 10G SFP+ Direct Attach Cable (DAC)
DEM-CB300S	3mt 10G SFP+ Direct Attach Cable (DAC)
DPS-500A	AC Redundant Power Supply
DPS-700	589 Watt Redundant Power Supply

Highights:

	2 x 10GBASE-T, 4x SFP+ 10G ports		Physical Stacking		Layer 2 Features		Layer 3 Features
	Connect to areas of your network at 10G speeds, and reach even further distances with fibre optic cabling.		Up to 9 units per stack1, with a maximum of 324 ports, and up to 80GB of bandwidth.		Such as flow control, link aggregation, Ethernet Ring Protection Switching (ERPS), Spanning Tree Protocols, Loopback Detection, IGMP/MLD Snooping.		Including up to 16 IP Interfaces, IGMP Filtering, Neighbor Discovery Protocol (ND), ARP Proxy, VRRP.
	RIPv1/v2/ng		Static Routing		Industry Standard CLI		Dual Image
	Determines the best route to a destination in the network.		Route Layer 3 traffic between switches, even if they're segmented in VLANs.		Supports a full industry standard Command-Line Interface for system management.		Risk-free configuration testing.

Greater port density. Powerful Layer 3 features.

World-class reliability

Advanced L2 and L3 features including port security, Storm Control, Spanning Tree Protocols, IGMP/MLD Snooping, and IPv6 ND. Management options like a multilingual web-UI, and industry standard CLI support, with support for multiple images and multiple configurations.

6x 10-Gigabit ports, physical stacking for more ports, and they have built-in G.8032 Ethernet Ring Protection Switching (ERPS) to help minimise recovery times to 50 ms. An USB 2.0 interface to store config files, boot images, and syslog. As well as support for an additional external redundant power supply on all models to ensure maximum uptime.

Comprehensive security.

Includes the latest security such as Multi-layer and Packet Content Access Control Lists (ACL), and Storm Control. And our exclusive D-Link Safeguard Engine has been designed to guard against traffic flooding caused by malicious attacks and protect your business network uptime.

IP-MAC-Port Binding allows you to bind a source IP address with an associated MAC and define the port number to enhance user access control. And DHCP Snooping makes the switch learn IP/MAC pairs by snooping DHCP packets and saving them to the IMPB whitelist, giving you extra control.

Easy Access Control policies.

They feature multiple authentication mechanisms such as 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC) for strict access control and an easy deployment. After authentication, individual policies such as VLAN membership, Quality of Service (QoS) policies, and ACL rules can be assigned to each host.

Support for the Microsoft® NAP policy enforcement allows you to protect network assets from compromised computers by enforcing compliance with network health policies.

Versatile traffic management.

A rich set of multi-layer QoS/CoS features ensure that critical network services such as VoIP, video conferences, IPTV, and IP surveillance are always given high priority, and 10-Gigabit ports deliver the speed you need. Traffic Shaping features guarantee bandwidth for these services even when the network is busy. L2 Multicast support enables the DGS-3130 Series to handle growing IPTV applications.

Host-based IGMP/MLD Snooping allows multiple multicast subscribers per physical interface while ISM VLAN allows the switches to send multicast streams in a multicast VLAN to save bandwidth, and to provide better security to the backbone network. The ISM VLAN profiles allow you to bind or replace the pre-defined multicast registration information to subscriber ports quickly and easily. Selective Q-in-Q enables you to be selective over VLAN traffic.

PoE+ with budgets up to 740W

The DGS-3130-30PS has a 370W PoE power budget. Or utilise a total of 740W when adding a redundant power supply.

¹ When stacking the DGS-3130-30TS/30S/30PS models, the stacking cost is 1 per unit so the maximum units per stack is 9. When stacking the DGS-3130-54TS/54S/54PS models, the stacking cost is 2 per unit so the maximum units per stack is 6. When stacking different models in the same stack, switches can be stacked up to a maximum of 12 stacking cost per stack. For example: 2 x DGS-3130-30TS (2 stacking cost) + 2 x DGS-3130-30S (2 stacking cost) + 4 x DGS-3130-54TS (8 stacking cost) consumes a total stacking cost of 12 (2+2+8).