StarTech SMF Ethernet Media Converters

Gigabit Ethernet to SC Fiber Media Converter - 1000Base-LX - Single-mode - 10 km

Convert and extend a Gigabit Ethernet connection up to 10 km over single-mode SC fiber


This fiber media converter converts and extends a Gigabit Ethernet (1000 Mbps) network up to 10 km over single-mode fiber on 1000BASE-LX networks.




Extend your GbE network cost-effectively The fiber media converter provides a cost-effective way to transparently convert copper to fiber, or fiber to copper, for connecting remote sub-networks to larger fiber-optic networks. Providing both SC fiber and RJ45 Ethernet ports, it integrates easily into a wide range of Gigabit Ethernet network infrastructures. The RJ45 port supports triple-speed (10/100/1000 BASE-T) auto-negotiation.




Reliable and scalable network connectivity Supporting a maximum single-mode fiber cable distance of up to 10 km (6.2 mi.), the media converter delivers a simple and reliable solution for connecting Gigabit Ethernet networks to remote locations, while ensuring solid network performance. It provides optimum network scalability for connecting two or more Ethernet network nodes, for instance, connecting two buildings on the same campus or facility. The media converter also delivers high-speed bandwidth to meet the increasing demands of large-scale workgroups that require expansion of a Gigabit Ethernet network.


The MCMGBSCSM10 is backed by a StarTech.com 2-year warranty and free lifetime technical support.




Product Diagram:

 






Applications:

Extend an Ethernet connection by up to 10 km (6.2 miles) over a fiber backbone
Create an economical Ethernet-fiber/copper-fiber link for connecting remote sub-networks to larger fiber-optic networks/backbones
Converts Ethernet to fiber, and fiber to copper to provide a cost-effective networking solution









Features:

Converts and extends a Gigabit Ethernet (1000 Mbps) network up to 10 km over single-mode fiber on 1000BASE-LX networks
Provides a cost-effective Ethernet to fiber/copper to fiber link
Supports a maximum distance of 10 km over single mode duplex fiber optic cable (SC connection)
Compact design and wall mountable
Non-blocking full wire-speed forwarding rate
Provides DIP switch supporting Link Fault Pass-through function
LED Indicators for simple Ethernet/fiber network link monitoring
1310 nm wavelength
Supports IEEE 802.1q Tag VLAN pass through








Network Fiber optic connector SC Jumbo frames support Yes Store-and-forward Yes Jumbo frames 9000 Converter input interface 10Base-T, 100Base-TX, 1000Base-T Networking standards IEEE 802.1Q, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x Ethernet LAN data rates 10, 100, 1000 Mbit/s Ethernet interface type Fast Ethernet, Gigabit Ethernet Duplex system Full Converter output interface 100Base-LX Auto MDI/MDI-X Yes Maximum data transfer rate 1000 Mbit/s
Technical details Wavelength 1310 nm Maximum transfer distance 10000 m Fiber mode structure Single-mode Internal No Sustainability certificates RoHS
Performance Jumbo frames support Yes Store-and-forward Yes Wavelength-division multiplexing (WDM) No Wavelength 1310 nm Maximum transfer distance 10000 m Fiber mode structure Single-mode Mean time between failures (MTBF) 50000 h
Ports & interfaces Connectivity technology Wired Ethernet LAN (RJ-45) ports 1 Fiber ports quantity 1 Fiber optic connector SC
Design LED indicators Activity, Link, Power Product colour Black Certification CE, FCC Internal No
Power Power plug type Type N Input voltage 100 - 240 V Input current 0.5 A Output voltage 5 V Output current 2.6 A External power adapter Yes
Operational conditions Operating temperature (T-T) 0 - 50 °C Storage temperature (T-T) -10 - 70 °C Operating relative humidity (H-H) 5 - 90 %
Weight & dimensions Width 105 mm Height 26 mm Depth 70 mm Weight 196 g
Packaging data Package width 138 mm Package height 66 mm Package depth 285 mm Package weight 560 g Quick installation guide Yes AC adapter included Yes Full specification and details can be found in the

10/100 Mbps Single Mode Fiber Media Converter SC 30 km

Convert and extend a 10/100 Mbps Ethernet connection up to 18.6 miles/30km over Single Mode SC fiber






 



The ET90110SM302 10/100 Mbps Single Mode Fiber Media Converter SC (30 km) lets you extend a Fast Ethernet network (10/100) over single mode fiber, at distances up to 30 km (18.6 miles).


A cost-effective solution for connecting a 10/100 Mbps Ethernet (10/100Base-T) network to remote network segments over a 100Base-FX fiber backbone, the media converter is designed to offer a durable and convenient Ethernet to fiber solution, with an all-steel chassis, and simple plug-and-play installation with minimal configuration required.


Backed by a StarTech.com 2-year warranty and free lifetime technical support.




Product Diagram:

 






Applications:

Provides connectivity to a user or network segment that is in an isolated area of a large complex or in another building altogether
Perfect for secured environments required by government agencies, where EMI is not acceptable
Connect traffic control/monitoring systems at extreme distances to the main office
Extend network connectivity to remote areas of stadiums, auditoriums or other venues
Converts 100Base-FX fiber optic signals to 10/100Base-T Ethernet over single mode fiber cable









Features:

Cost-effective way to extend/bridge networks using fiber cabling
Advanced features include Link-loss forwarding, remote status monitoring, two frame lengths
Maximum Fiber Cable length of 30 km
Supports full or half-duplex operation
Easy to use and install









The StarTech.com Advantage:

Link loss forwarding, remote monitoring of status ensures maximum up-time
Rugged steel casing for added durability in harsh environments
Cost-effective way to extend/bridge networks using fiber cabling








Network Fiber optic connector SC Converter input interface 10Base-T Ethernet LAN data rates 10, 100 Mbit/s Ethernet interface type Fast Ethernet Duplex system Full, Half Converter output interface 100Base-FX Auto MDI/MDI-X Yes Maximum data transfer rate 200 Mbit/s
Technical details Wavelength 1310 nm Maximum transfer distance 30000 m Fiber mode structure Single-mode Plug and Play Yes Internal No Sustainability certificates RoHS
Performance Plug and Play Yes Wavelength 1310 nm Maximum transfer distance 30000 m Fiber mode structure Single-mode
Ports & interfaces Connectivity technology Wired Ethernet LAN (RJ-45) ports 1 Fiber ports quantity 1 Fiber optic connector SC DC-in jack Yes
Design Product colour Black Certification CE, FCC Internal No
Power Output voltage 12 V Output current 1 A External power adapter Yes
Operational conditions Operating temperature (T-T) 0 - 60 °C Storage temperature (T-T) -10 - 70 °C Operating relative humidity (H-H) 10 - 90 %
Weight & dimensions Width 95 mm Height 20 mm Depth 160 mm Weight 600 g
Packaging data Package width 206 mm Package height 89 mm Package depth 137 mm Package weight 766 g Full specification and details can be found in the

10/100 Mbps Ethernet Single Mode WDM Fiber Media Converter Kit SC 20km

Convert and extend a 10/100 Mbps Ethernet connection up to 12.4 miles/20 km over a single mode SC fiber cable






 



The ET90110WDM2 10/100 Mbps Ethernet Single Mode WDM Fiber Media Converter Kit SC (20km) lets you extend a 10/100 Mbps Ethernet connection over single mode fiber, at distances up to 20 km (12.4 mi).


The converter offers Wavelength-Division Multiplexing (WDM), enabling bi-directional communication over a single strand of fiber, essentially doubling the capacity of your existing fiber infrastructure without having to install new cabling.


The Ethernet to WDM Fiber Kit includes both endpoints (two interchangeable modules) - a simple solution for connecting 10/100Base-T networks to remote locations using SC-terminated single mode fiber. The Ethernet to Fiber Converter also features a durable all-steel chassis, and a simple plug-and-play installation with minimal configuration required.


Backed by a StarTech.com 2-year warranty and free lifetime technical support.




Product Diagram:

 






Applications:

Provides connectivity to a user or network segment that is in an isolated area of a large complex or in another building altogether
Suitable for environments such as government agencies, where security threats (network tapping, etc.) need to be prevented
Connect traffic control/monitoring systems at extreme distances to the main office
Extend network connectivity to remote areas of stadiums, auditoriums or other venues
Converts 10/100Base-T Ethernet to 100Base-FX fiber optic signals (and back - includes both endpoints) over single mode fiber cable









Features:

WDM (Wave Division Multiplexing) technology allows the use of a single fiber cable for full-duplex bi-directional communication
Kit includes local and remote converter module for a complete solution
Maximum Fiber Cable Length of 20 Km
Advanced features include Link-loss forwarding, remote status monitoring, two frame lengths
Supports full or half-duplex operation
Easy to use and install









The StarTech.com Advantage:

Wavelength Division Multiplexing (WDM) fiber cuts cabling costs in half, or doubles existing network speed/capacity using pre-existing cables
Rugged steel casing for durability in harsh environments








Network Fiber optic connector SC Converter input interface 100Base-TX, 10Base-T Networking standards IEEE 802.3,IEEE 802.3u Ethernet LAN data rates 10, 100 Mbit/s Ethernet interface type Fast Ethernet Duplex system Full, Half Converter output interface 100Base-FX Auto MDI/MDI-X Yes Maximum data transfer rate 200 Mbit/s
Technical details Wavelength 1310 nm Maximum transfer distance 20000 m Fiber mode structure Single-mode Plug and Play Yes Internal No Sustainability certificates RoHS
Performance Plug and Play Yes Wavelength 1310 nm Maximum transfer distance 20000 m Fiber mode structure Single-mode
Ports & interfaces Connectivity technology Wired Ethernet LAN (RJ-45) ports 1 Fiber ports quantity 1 Fiber optic connector SC DC-in jack Yes
Design Product colour Black Certification CE, FCC Internal No
Power Output voltage 12 V Output current 1 A External power adapter Yes
Operational conditions Operating temperature (T-T) 0 - 60 °C Storage temperature (T-T) -10 - 70 °C Operating relative humidity (H-H) 10 - 90 %
Weight & dimensions Width 95 mm Height 20 mm Depth 160 mm Weight 1.2 kg
Packaging data Package width 211 mm Package height 101 mm Package depth 279 mm Package weight 1.36 kg Full specification and details can be found in the

1000 Mbps Gigabit Single Mode Fiber Media Converter LC 40 km

Convert and extend a Gigabit Ethernet connection up to 24.8 miles/40km over Single Mode LC fiber






 



The ET1000S40LC2 1000 Mbps Gigabit Single-Mode Fiber Media Converter (LC, 40 km) enables you to extend a Gigabit Ethernet network over single-mode fiber, at distances up to 40km (25 miles).

A cost-effective solution for connecting a Gigabit Ethernet (1000Base-T) network to remote network segments over a (1000Base-LX/SX) fiber backbone, the GbE to SM fiber converter supports full Gigabit speeds for ideal network performance and scalability. Designed to offer a durable and convenient Ethernet to fiber solution, the Ethernet to LC Fiber converter features an all-steel chassis, and a simple plug-and-play installation with minimal configuration required.


Backed by a StarTech.com 2-year warranty and free lifetime technical support.




Product Diagram:

 






Applications:

Provides connectivity to a user or network segment that is in an isolated area of a large complex or in another building altogether
Perfect for secure connections required by government agencies where EMI is not acceptable
Connect traffic control/monitoring systems at extreme distances to the main office
Extend network connectivity to remote areas of stadiums, auditoriums or other venues
Converts 1000Base-LX fiber optic signals to 1000Base-T Ethernet over single mode fiber cable









Features:

Advanced features include Link-loss forwarding, remote monitor status, two frame lengths
Maximum Fiber Cable length of 40 Km
Supports full or half-duplex operation
Easy installation









The StarTech.com Advantage:

Link loss forwarding, remote monitoring of status ensures maximum up-time
Rugged steel casing for added durability in harsh environments
Cost-effective way to extend/bridge networks using fiber cabling








Network Fiber optic connector LC Converter input interface 1000Base-T Ethernet LAN data rates 10, 100, 1000 Mbit/s Ethernet interface type Gigabit Ethernet Duplex system Full, Half Converter output interface 1000Base-LX, 1000Base-SX Auto MDI/MDI-X Yes Maximum data transfer rate 2000 Mbit/s
Technical details Wavelength 1310 nm Maximum transfer distance 40000 m Fiber mode structure Single-mode Plug and Play Yes Internal No Sustainability certificates RoHS
Performance Plug and Play Yes Wavelength 1310 nm Maximum transfer distance 40000 m Fiber mode structure Single-mode Mean time between failures (MTBF) 65000 h
Ports & interfaces Ethernet LAN (RJ-45) ports 1 Fiber ports quantity 1 Fiber optic connector LC DC-in jack Yes
Design Product colour Black Certification CE, FCC Internal No
Power Output voltage 12 V Output current 1 A External power adapter Yes
Operational conditions Operating temperature (T-T) 0 - 60 °C Storage temperature (T-T) -10 - 70 °C Operating relative humidity (H-H) 10 - 90 %
Weight & dimensions Width 95 mm Height 20 mm Depth 160 mm Weight 620 g
Packaging data Package width 205 mm Package height 89 mm Package depth 138 mm Package weight 754 g Full specification and details can be found in the

Gigabit Ethernet Single Mode Fiber Media Converter SC 40 km - 1000 Mbps

Convert and extend a Gigabit Ethernet connection up to 24.8 miles/40 km over Single Mode SC fiber






 



The ET91000SM402 1000 Mbps Gigabit Single Mode Fiber Media Converter SC (40 km) lets you extend a Gigabit Ethernet network over single mode fiber by up to 40km (25 miles).


A cost-effective solution for connecting a Gigabit Ethernet (1000Base-T) network to remote network segments over a (1000Base-LX/SX) fiber backbone, the GbE to SM fiber converter supports full Gigabit speeds for ideal network performance and scalability. Designed to offer a durable and convenient Ethernet to fiber solution, the Ethernet to SC Fiber converter features an all-steel chassis, and a simple plug-and-play installation with minimal configuration required.


Backed by a StarTech.com 2-year warranty and free lifetime technical support.




Product Diagram:

 






Applications:

Provides network connectivity to users or network segments located in isolated areas of a large complex or separate building
Suitable for environments such as government agencies, where security threats (network tapping, etc.) need to be prevented
Connect traffic control/monitoring systems at extreme distances to the main office
Extend network connectivity to remote areas of stadiums, auditoriums or other venues
Converts 1000Base-LX fiber optic signals to 1000Base-T Ethernet over single mode fiber cable










Features:

Cost-effective way to extend/bridge networks using fiber cabling
Advanced features include Link-loss forwarding, remote monitor status, two frame lengths
Maximum Fiber Cable length of 40 km
Supports full or half-duplex operation
Quick and simple installation, easy to use









The StarTech.com Advantage:

Link loss forwarding, remote status monitoring help ensure maximum up-time
Rugged steel casing for added durability in harsh environments








Network Fiber optic connector SC Converter input interface 1000Base-T Ethernet LAN data rates 1000 Mbit/s Ethernet interface type Gigabit Ethernet Duplex system Full, Half Converter output interface 1000Base-LX, 1000Base-SX Auto MDI/MDI-X Yes Maximum data transfer rate 2000 Mbit/s
Technical details Wavelength 1310 nm Maximum transfer distance 40000 m Fiber mode structure Single-mode Plug and Play Yes Internal No Sustainability certificates RoHS
Performance Plug and Play Yes Wavelength 1310 nm Maximum transfer distance 40000 m Fiber mode structure Single-mode Mean time between failures (MTBF) 65000 h
Ports & interfaces Connectivity technology Wired Ethernet LAN (RJ-45) ports 1 Fiber ports quantity 1 Fiber optic connector SC DC-in jack Yes
Design Product colour Black Certification CE, FCC Internal No
Power Output voltage 12 V Output current 1 A Power consumption (typical) 4 W External power adapter Yes
Operational conditions Operating temperature (T-T) 0 - 60 °C Storage temperature (T-T) -10 - 70 °C Operating relative humidity (H-H) 10 - 90 %
Weight & dimensions Width 95 mm Height 20 mm Depth 160 mm Weight 600 g
Packaging data Package width 140 mm Package height 91 mm Package depth 205 mm Package weight 700 g Full specification and details can be found in the