D-Link Gigabit Layer 3 Managed Switches

Lite Layer 3 stackable managed switch for a secure enterprise or metro Ethernet access network.

Adaptable, Bottleneck-Free 10G Business Connectivity

The DGS-3130 Series is a highly versatile Lite Layer 3 stackable switch. Including powerful L2 & L3 features, as well as support for multiple software images, it is highly pliant, capable of accommodating different network deployments.

With network bottlenecks on the rise, the DGS-3130 Series's six 10 Gigabit uplink ports are an ideal solution. Business can flexibly increase their bandwidth with flexibility to incrementally meet growing bandwidth demands.

Highly Reliable

Redundant power supply (RPS) support, Ethernet Ring Protection (ERPS) and 6 kV surge protection on all GE and RJ-45 access ports

Feature-Rich Unified Software

Powerful L2 and L3 features such as Static Route, RIP/RIPng and OSPFv2/v3

Scalable and Highly Available

Supports high bandwidth stacking and fault tolerant topologies

Easy Access Control

Support for 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC)

48 x SFP ports
2 x 10GBASE-T and 4 x 10G SFP+ ports provide all the uplink capacity your network needs
Premium L2 and L3 features effortlessly improve network efficiency and reduce unnecessary data transfer
High redundancy features to provide professional-grade reliability and a longer product life:
Dual power inputs
Ethernet Ring Protection Switching with <50ms recovery time
6 kV surge protection protects the device and those connected from unexpected surges
802.1d/w/s Spanning Tree Protocol avoids potentially network crippling loops
RIP/RIPng and OSFPv2/v3 dynamically map out your network, aiding data to get to its destination via the fastest route possible.
Expand capacity in a flash with physical stacking up to 9 units
80 Gbps per device physical stacking bandwidth
The Smart fan self-adjusts accordingly to maintain optimal operating temperatures
Weather the Storm

The DGS-3130 Series features built-in 6 kV surge protection on all PoE and non-PoE Gigabit Ethernet access ports without needing external surge protection. This effectively protects the switches against sudden electrical surges caused events such as lightning strikes or unstable electrical current. This significantly reduces the chances of equipment being damaged, effectively lowering maintenance costs by minimizing the need for expensive repairs or replacement.

Highly Available. Highly Flexible.

The D-Link DGS-3130 Lite Layer 3 Stackable Managed Switches are a Gigabit access layer solution specifically designed to connect end-users in a secure enterprise or metro Ethernet access network.

The switches support high bandwidth, long distance stacking, with physical stacking of up to 9 units over fiber, increasing available Gigabit ports on demand. This makes them ideal for network administrators who demand agile expansion functionality without having to sacrifice network reliability.

Slash Your Network Downtime

The DGS-3130 Series gives enterprises and organizations a highly reliable network, allowing for maximum business continuity. It has built-in G.8032 Ethernet Ring Protection Switching (ERPS) to help minimize recovery times to 50 ms.

Along with a host of essential network reliability features, all switches in the series support an external redundant power supply to ensure your operations continue unimpeded.

Comprehensive Security

The DGS-3130 Series gives your network the protection it deserves with leading-edge security features that handle threats effectively. With built-in IP-MAC-Port Binding, the switches allow administrators to enhance user access control.

Other advanced features like DHCP Snooping let the switches automatically learn and save IP/MAC pairs to the IMPB white list.

Powerful and Unified

Powerful L2 and L3 features such as RIP/RIPng and OSPFv2/v3 come together in an integrated software image. This allows the switches to satisfy a wide range of requirements for different applications – perfect for building the solid and networks.

Manage Network Traffic in a Whole New Way

The DGS-3130 Series implements a rich set of multi-layer QoS/CoS features to prioritize critical network services such as VoIP, video conferences, IPTV, and IP surveillance. With robust features including Traffic Shaping, L2 Multicast, Host-based IGMP/MLD Snooping and ISM VLAN, administrators get a whole new way to manage their traffic that fits their needs.

Flexible Access Control Policies

Strict access control and deployment are made easy with the DGS-3130 switches. All support authentication mechanisms such as 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC), and allow individual policies to be assigned to each host after authentication. In addition, the switch also supports Microsoft® NAP (Network Access Protection).

Lite Layer 3 stackable managed switch for a secure enterprise or metro Ethernet access network.

Adaptable, Bottleneck-Free 10G Business Connectivity

The DGS-3130 Series is a highly versatile Lite Layer 3 stackable switch. Including powerful L2 & L3 features, as well as support for multiple software images, it is highly pliant, capable of accommodating different network deployments.

With network bottlenecks on the rise, the DGS-3130 Series's six 10 Gigabit uplink ports are an ideal solution. Business can flexibly increase their bandwidth with flexibility to incrementally meet growing bandwidth demands.

Highly Reliable

Redundant power supply (RPS) support, Ethernet Ring Protection (ERPS) and 6 kV surge protection on all GE and RJ-45 access ports

Feature-Rich Unified Software

Powerful L2 and L3 features such as Static Route, RIP/RIPng and OSPFv2/v3

Scalable and Highly Available

Supports high bandwidth stacking and fault tolerant topologies

Easy Access Control

Support for 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC)

48 x 10/100/1000BASE-T ports
2 x 10GBASE-T and 4 x 10G SFP+ ports provide all the uplink capacity your network needs
Premium L2 and L3 features effortlessly improve network efficiency and reduce unnecessary data transfer
High redundancy features to provide professional-grade reliability and a longer product life:
Dual power inputs
Ethernet Ring Protection Switching with <50ms recovery time
6 kV surge protection protects the device and those connected from unexpected surges
802.1d/w/s Spanning Tree Protocol avoids potentially network crippling loops
RIP/RIPng and OSFPv2/v3 dynamically map out your network, aiding data to get to its destination via the fastest route possible.
Expand capacity in a flash with physical stacking up to 9 units
80 Gbps per device physical stacking bandwidth
The Smart fan self-adjusts accordingly to maintain optimal operating temperatures
Weather the Storm

The DGS-3130 Series features built-in 6 kV surge protection on all PoE and non-PoE Gigabit Ethernet access ports without needing external surge protection. This effectively protects the switches against sudden electrical surges caused events such as lightning strikes or unstable electrical current. This significantly reduces the chances of equipment being damaged, effectively lowering maintenance costs by minimizing the need for expensive repairs or replacement.

Highly Available. Highly Flexible.

The D-Link DGS-3130 Lite Layer 3 Stackable Managed Switches are a Gigabit access layer solution specifically designed to connect end-users in a secure enterprise or metro Ethernet access network.

The switches support high bandwidth, long distance stacking, with physical stacking of up to 9 units over fiber, increasing available Gigabit ports on demand. This makes them ideal for network administrators who demand agile expansion functionality without having to sacrifice network reliability.

Slash Your Network Downtime

The DGS-3130 Series gives enterprises and organizations a highly reliable network, allowing for maximum business continuity. It has built-in G.8032 Ethernet Ring Protection Switching (ERPS) to help minimize recovery times to 50 ms.

Along with a host of essential network reliability features, all switches in the series support an external redundant power supply to ensure your operations continue unimpeded.

Comprehensive Security

The DGS-3130 Series gives your network the protection it deserves with leading-edge security features that handle threats effectively. With built-in IP-MAC-Port Binding, the switches allow administrators to enhance user access control.

Other advanced features like DHCP Snooping let the switches automatically learn and save IP/MAC pairs to the IMPB white list.

Powerful and Unified

Powerful L2 and L3 features such as RIP/RIPng and OSPFv2/v3 come together in an integrated software image. This allows the switches to satisfy a wide range of requirements for different applications – perfect for building the solid and networks.

Manage Network Traffic in a Whole New Way

The DGS-3130 Series implements a rich set of multi-layer QoS/CoS features to prioritize critical network services such as VoIP, video conferences, IPTV, and IP surveillance. With robust features including Traffic Shaping, L2 Multicast, Host-based IGMP/MLD Snooping and ISM VLAN, administrators get a whole new way to manage their traffic that fits their needs.

Flexible Access Control Policies

Strict access control and deployment are made easy with the DGS-3130 switches. All support authentication mechanisms such as 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC), and allow individual policies to be assigned to each host after authentication. In addition, the switch also supports Microsoft® NAP (Network Access Protection).

Lite Layer 3 stackable managed switch for a secure enterprise or metro Ethernet access network.

Adaptable, Bottleneck-Free 10G Business Connectivity

The DGS-3130 Series is a highly versatile Lite Layer 3 stackable switch. Including powerful L2 & L3 features, as well as support for multiple software images, it is highly pliant, capable of accommodating different network deployments.

With network bottlenecks on the rise, the DGS-3130 Series's six 10 Gigabit uplink ports are an ideal solution. Business can flexibly increase their bandwidth with flexibility to incrementally meet growing bandwidth demands.

Highly Reliable

Redundant power supply (RPS) support, Ethernet Ring Protection (ERPS) and 6 kV surge protection on all GE and RJ-45 access ports

Feature-Rich Unified Software

Powerful L2 and L3 features such as Static Route, RIP/RIPng and OSPFv2/v3

Scalable and Highly Available

Supports high bandwidth stacking and fault tolerant topologies

Easy Access Control

Support for 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC)

24 x 10/100/1000BASE-T ports
2 x 10GBASE-T and 4 x 10G SFP+ ports provide all the uplink capacity your network needs
Premium L2 and L3 features effortlessly improve network efficiency and reduce unnecessary data transfer
High redundancy features to provide professional-grade reliability and a longer product life:
Dual power inputs
Ethernet Ring Protection Switching with <50ms recovery time
6 kV surge protection protects the device and those connected from unexpected surges
802.1d/w/s Spanning Tree Protocol avoids potentially network crippling loops
RIP/RIPng and OSFPv2/v3 dynamically map out your network, aiding data to get to its destination via the fastest route possible.
Expand capacity in a flash with physical stacking up to 9 units
80 Gbps per device physical stacking bandwidth
The Smart fan self-adjusts accordingly to maintain optimal operating temperatures
Weather the Storm

The DGS-3130 Series features built-in 6 kV surge protection on all PoE and non-PoE Gigabit Ethernet access ports without needing external surge protection. This effectively protects the switches against sudden electrical surges caused events such as lightning strikes or unstable electrical current. This significantly reduces the chances of equipment being damaged, effectively lowering maintenance costs by minimizing the need for expensive repairs or replacement.

Highly Available. Highly Flexible.

The D-Link DGS-3130 Lite Layer 3 Stackable Managed Switches are a Gigabit access layer solution specifically designed to connect end-users in a secure enterprise or metro Ethernet access network.

The switches support high bandwidth, long distance stacking, with physical stacking of up to 9 units over fiber, increasing available Gigabit ports on demand. This makes them ideal for network administrators who demand agile expansion functionality without having to sacrifice network reliability.

Slash Your Network Downtime

The DGS-3130 Series gives enterprises and organizations a highly reliable network, allowing for maximum business continuity. It has built-in G.8032 Ethernet Ring Protection Switching (ERPS) to help minimize recovery times to 50 ms.

Along with a host of essential network reliability features, all switches in the series support an external redundant power supply to ensure your operations continue unimpeded.

Comprehensive Security

The DGS-3130 Series gives your network the protection it deserves with leading-edge security features that handle threats effectively. With built-in IP-MAC-Port Binding, the switches allow administrators to enhance user access control.

Other advanced features like DHCP Snooping let the switches automatically learn and save IP/MAC pairs to the IMPB white list.

Powerful and Unified

Powerful L2 and L3 features such as RIP/RIPng and OSPFv2/v3 come together in an integrated software image. This allows the switches to satisfy a wide range of requirements for different applications – perfect for building the solid and networks.

Manage Network Traffic in a Whole New Way

The DGS-3130 Series implements a rich set of multi-layer QoS/CoS features to prioritize critical network services such as VoIP, video conferences, IPTV, and IP surveillance. With robust features including Traffic Shaping, L2 Multicast, Host-based IGMP/MLD Snooping and ISM VLAN, administrators get a whole new way to manage their traffic that fits their needs.

Flexible Access Control Policies

Strict access control and deployment are made easy with the DGS-3130 switches. All support authentication mechanisms such as 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC), and allow individual policies to be assigned to each host after authentication. In addition, the switch also supports Microsoft® NAP (Network Access Protection).

Lite Lite Layer 3 stackable managed switch for a secure enterprise or metro Ethernet access network.

Adaptable, Bottleneck-Free 10G Business Connectivity

The DGS-3130 Series is a highly versatile Lite Layer 3 stackable switch. Including powerful L2 & L3 features, as well as support for multiple software images, it is highly pliant, capable of accommodating different network deployments.

With network bottlenecks on the rise, the DGS-3130 Series's six 10 Gigabit uplink ports are an ideal solution. Business can flexibly increase their bandwidth with flexibility to incrementally meet growing bandwidth demands.

Highly Reliable

Redundant power supply (RPS) support, Ethernet Ring Protection (ERPS) and 6 kV surge protection on all GE and RJ-45 access ports

Feature-Rich Unified Software

Powerful L2 and L3 features such as Static Route, RIP/RIPng and OSPFv2/v3

Scalable and Highly Available

Supports high bandwidth stacking and fault tolerant topologies

Easy Access Control

Support for 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC)

24 x 10/100/1000BASE-T PoE ports
2 x 10GBASE-T and 4 x 10G SFP+ ports provide all the uplink capacity your network needs
Premium L2 and L3 features effortlessly improve network efficiency and reduce unnecessary data transfer
High redundancy features to provide professional-grade reliability and a longer product life:
Dual power inputs
Ethernet Ring Protection Switching with <50ms recovery time
6 kV surge protection protects the device and those connected from unexpected surges
802.1d/w/s Spanning Tree Protocol avoids potentially network crippling loops
RIP/RIPng and OSFPv2/v3 dynamically map out your network, aiding data to get to its destination via the fastest route possible.
A formidable PoE budget of 370 W allows powering of numerous external devices (further expandable to 740 W)
Expand capacity in a flash with physical stacking up to 9 units
80 Gbps per device physical stacking bandwidth
The Smart fan self-adjusts accordingly to maintain optimal operating temperatures
Power Even More Devices

The DGS-3130-30PS model features Power over Ethernet, which compatible devices to be powered by the switch through a standard Ethernet cable. It supports the IEEE 802.3af PoE and IEEE 802.3at PoE+ standards, providing up to 30W of power per port. PoE effectively reduces deployment time for PoE devices such as IP cameras, VoIP phones, and access points, and eliminates the cost for additional electrical cabling. The 370W PoE power budget, which can be increased to 740 W when outfitted with the DPS-700 redundant power supply, allow the switches to power even more devices. Additionally, an extended Link Layer Discovery Protocol (LLDP) automatically negotiates and manages the power feed to IEEE 802.3at PoE+ powered devices for optimal power distribution.

Weather the Storm

The DGS-3130 Series features built-in 6 kV surge protection on all PoE and non-PoE Gigabit Ethernet access ports without needing external surge protection. This effectively protects the switches against sudden electrical surges caused events such as lightning strikes or unstable electrical current. This significantly reduces the chances of equipment being damaged, effectively lowering maintenance costs by minimizing the need for expensive repairs or replacement.

Highly Available. Highly Flexible.

The D-Link DGS-3130 Lite Layer 3 Stackable Managed Switches are a Gigabit access layer solution specifically designed to connect end-users in a secure enterprise or metro Ethernet access network.

The switches support high bandwidth, long distance stacking, with physical stacking of up to 9 units over fiber, increasing available Gigabit ports on demand. This makes them ideal for network administrators who demand agile expansion functionality without having to sacrifice network reliability.

Slash Your Network Downtime

The DGS-3130 Series gives enterprises and organizations a highly reliable network, allowing for maximum business continuity. It has built-in G.8032 Ethernet Ring Protection Switching (ERPS) to help minimize recovery times to 50 ms.

Along with a host of essential network reliability features, all switches in the series support an external redundant power supply to ensure your operations continue unimpeded.

Comprehensive Security

The DGS-3130 Series gives your network the protection it deserves with leading-edge security features that handle threats effectively. With built-in IP-MAC-Port Binding, the switches allow administrators to enhance user access control.

Other advanced features like DHCP Snooping let the switches automatically learn and save IP/MAC pairs to the IMPB white list.

Powerful and Unified

Powerful L2 and L3 features such as RIP/RIPng and OSPFv2/v3 come together in an integrated software image. This allows the switches to satisfy a wide range of requirements for different applications – perfect for building the solid and networks.

Manage Network Traffic in a Whole New Way

The DGS-3130 Series implements a rich set of multi-layer QoS/CoS features to prioritize critical network services such as VoIP, video conferences, IPTV, and IP surveillance. With robust features including Traffic Shaping, L2 Multicast, Host-based IGMP/MLD Snooping and ISM VLAN, administrators get a whole new way to manage their traffic that fits their needs.

Flexible Access Control Policies

Strict access control and deployment are made easy with the DGS-3130 switches. All support authentication mechanisms such as 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC), and allow individual policies to be assigned to each host after authentication. In addition, the switch also supports Microsoft® NAP (Network Access Protection).

Lite Lite Layer 3 stackable managed switch for a secure enterprise or metro Ethernet access network.

Adaptable, Bottleneck-Free 10G Business Connectivity

The DGS-3130 Series is a highly versatile Lite Layer 3 stackable switch. Including powerful L2 & L3 features, as well as support for multiple software images, it is highly pliant, capable of accommodating different network deployments.

With network bottlenecks on the rise, the DGS-3130 Series's six 10 Gigabit uplink ports are an ideal solution. Business can flexibly increase their bandwidth with flexibility to incrementally meet growing bandwidth demands.

Highly Reliable

Redundant power supply (RPS) support, Ethernet Ring Protection (ERPS) and 6 kV surge protection on all GE and RJ-45 access ports

Feature-Rich Unified Software

Powerful L2 and L3 features such as Static Route, RIP/RIPng and OSPFv2/v3

Scalable and Highly Available

Supports high bandwidth stacking and fault tolerant topologies

Easy Access Control

Support for 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC)

24 x SFP ports
2 x 10GBASE-T and 4 x 10G SFP+ ports provide all the uplink capacity your network needs
Premium L2 and L3 features effortlessly improve network efficiency and reduce unnecessary data transfer
High redundancy features to provide professional-grade reliability and a longer product life:
Dual power inputs
Ethernet Ring Protection Switching with <50ms recovery time
6 kV surge protection protects the device and those connected from unexpected surges
802.1d/w/s Spanning Tree Protocol avoids potentially network crippling loops
RIP/RIPng and OSFPv2/v3 dynamically map out your network, aiding data to get to its destination via the fastest route possible.
Expand capacity in a flash with physical stacking up to 9 units
80 Gbps per device physical stacking bandwidth
The Smart fan self-adjusts accordingly to maintain optimal operating temperatures
Weather the Storm

The DGS-3130 Series features built-in 6 kV surge protection on all PoE and non-PoE Gigabit Ethernet access ports without needing external surge protection. This effectively protects the switches against sudden electrical surges caused events such as lightning strikes or unstable electrical current. This significantly reduces the chances of equipment being damaged, effectively lowering maintenance costs by minimizing the need for expensive repairs or replacement.

Highly Available. Highly Flexible.

The D-Link DGS-3130 Lite Layer 3 Stackable Managed Switches are a Gigabit access layer solution specifically designed to connect end-users in a secure enterprise or metro Ethernet access network.

The switches support high bandwidth, long distance stacking, with physical stacking of up to 9 units over fiber, increasing available Gigabit ports on demand. This makes them ideal for network administrators who demand agile expansion functionality without having to sacrifice network reliability.

Slash Your Network Downtime

The DGS-3130 Series gives enterprises and organizations a highly reliable network, allowing for maximum business continuity. It has built-in G.8032 Ethernet Ring Protection Switching (ERPS) to help minimize recovery times to 50 ms.

Along with a host of essential network reliability features, all switches in the series support an external redundant power supply to ensure your operations continue unimpeded.

Comprehensive Security

The DGS-3130 Series gives your network the protection it deserves with leading-edge security features that handle threats effectively. With built-in IP-MAC-Port Binding, the switches allow administrators to enhance user access control.

Other advanced features like DHCP Snooping let the switches automatically learn and save IP/MAC pairs to the IMPB white list.

Powerful and Unified

Powerful L2 and L3 features such as RIP/RIPng and OSPFv2/v3 come together in an integrated software image. This allows the switches to satisfy a wide range of requirements for different applications – perfect for building the solid and networks.

Manage Network Traffic in a Whole New Way

The DGS-3130 Series implements a rich set of multi-layer QoS/CoS features to prioritize critical network services such as VoIP, video conferences, IPTV, and IP surveillance. With robust features including Traffic Shaping, L2 Multicast, Host-based IGMP/MLD Snooping and ISM VLAN, administrators get a whole new way to manage their traffic that fits their needs.

Flexible Access Control Policies

Strict access control and deployment are made easy with the DGS-3130 switches. All support authentication mechanisms such as 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC), and allow individual policies to be assigned to each host after authentication. In addition, the switch also supports Microsoft® NAP (Network Access Protection).

Lite Layer 3 stackable managed switch for a secure enterprise or metro Ethernet access network.

Adaptable, Bottleneck-Free 10G Business Connectivity

The DGS-3130 Series is a highly versatile Lite Layer 3 stackable switch. Including powerful L2 & L3 features, as well as support for multiple software images, it is highly pliant, capable of accommodating different network deployments.

With network bottlenecks on the rise, the DGS-3130 Series's six 10 Gigabit uplink ports are an ideal solution. Business can flexibly increase their bandwidth with flexibility to incrementally meet growing bandwidth demands.

Highly Reliable

Redundant power supply (RPS) support, Ethernet Ring Protection (ERPS) and 6 kV surge protection on all GE and RJ-45 access ports

Feature-Rich Unified Software

Powerful L2 and L3 features such as Static Route, RIP/RIPng and OSPFv2/v3

Scalable and Highly Available

Supports high bandwidth stacking and fault tolerant topologies

Easy Access Control

Support for 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC)

48 x 10/100/1000BASE-T PoE ports
2 x 10GBASE-T and 4 x 10G SFP+ ports provide all the uplink capacity your network needs
Premium L2 and L3 features effortlessly improve network efficiency and reduce unnecessary data transfer
High redundancy features to provide professional-grade reliability and a longer product life:
Dual power inputs
Ethernet Ring Protection Switching with <50ms recovery time
6 kV surge protection protects the device and those connected from unexpected surges
802.1d/w/s Spanning Tree Protocol avoids potentially network crippling loops
RIP/RIPng and OSFPv2/v3 dynamically map out your network, aiding data to get to its destination via the fastest route possible.
A formidable PoE budget of 370 W allows powering of numerous external devices (further expandable to 740 W)
Expand capacity in a flash with physical stacking up to 9 units
80 Gbps per device physical stacking bandwidth
The Smart fan self-adjusts accordingly to maintain optimal operating temperatures
Power Even More Devices

The DGS-3130-54PS model features Power over Ethernet, which compatible devices to be powered by the switch through a standard Ethernet cable. It supports the IEEE 802.3af PoE and IEEE 802.3at PoE+ standards, providing up to 30W of power per port. PoE effectively reduces deployment time for PoE devices such as IP cameras, VoIP phones, and access points, and eliminates the cost for additional electrical cabling. The 370W PoE power budget, which can be increased to 740 W when outfitted with the DPS-700 redundant power supply, allow the switches to power even more devices. Additionally, an extended Link Layer Discovery Protocol (LLDP) automatically negotiates and manages the power feed to IEEE 802.3at PoE+ powered devices for optimal power distribution.

Weather the Storm

The DGS-3130 Series features built-in 6 kV surge protection on all PoE and non-PoE Gigabit Ethernet access ports without needing external surge protection. This effectively protects the switches against sudden electrical surges caused events such as lightning strikes or unstable electrical current. This significantly reduces the chances of equipment being damaged, effectively lowering maintenance costs by minimizing the need for expensive repairs or replacement.

Highly Available. Highly Flexible.

The D-Link DGS-3130 Lite Layer 3 Stackable Managed Switches are a Gigabit access layer solution specifically designed to connect end-users in a secure enterprise or metro Ethernet access network.

The switches support high bandwidth, long distance stacking, with physical stacking of up to 9 units over fiber, increasing available Gigabit ports on demand. This makes them ideal for network administrators who demand agile expansion functionality without having to sacrifice network reliability.

Slash Your Network Downtime

The DGS-3130 Series gives enterprises and organizations a highly reliable network, allowing for maximum business continuity. It has built-in G.8032 Ethernet Ring Protection Switching (ERPS) to help minimize recovery times to 50 ms.

Along with a host of essential network reliability features, all switches in the series support an external redundant power supply to ensure your operations continue unimpeded.

Comprehensive Security

The DGS-3130 Series gives your network the protection it deserves with leading-edge security features that handle threats effectively. With built-in IP-MAC-Port Binding, the switches allow administrators to enhance user access control.

Other advanced features like DHCP Snooping let the switches automatically learn and save IP/MAC pairs to the IMPB white list.

Powerful and Unified

Powerful L2 and L3 features such as RIP/RIPng and OSPFv2/v3 come together in an integrated software image. This allows the switches to satisfy a wide range of requirements for different applications – perfect for building the solid and networks.

Manage Network Traffic in a Whole New Way

The DGS-3130 Series implements a rich set of multi-layer QoS/CoS features to prioritize critical network services such as VoIP, video conferences, IPTV, and IP surveillance. With robust features including Traffic Shaping, L2 Multicast, Host-based IGMP/MLD Snooping and ISM VLAN, administrators get a whole new way to manage their traffic that fits their needs.

Flexible Access Control Policies

Strict access control and deployment are made easy with the DGS-3130 switches. All support authentication mechanisms such as 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC), and allow individual policies to be assigned to each host after authentication. In addition, the switch also supports Microsoft® NAP (Network Access Protection).

The all-new DGS-3130 Series Gigabit Layer 3 Stackable Managed Switches are designed to address the needs of small to medium-sized business networks. A unified software image incorporates L2 and L3 features enabling the family to be deployed in a variety of environments and topologies. Together the hardware and software enhancements combine to create a family of powerful, flexible and cost-effective switches.

The DGS-3130-30TS switch has 24 gigabit ports with six embedded 10G uplink/stacking ports. Two 10GBASE-T ports and four 10G SFP+ ports.

Features:

Reliability Redundant power supply (RPS) support
Ethernet Ring Protection Switching (ERPS) for single ring topologies
Embedded 6 kV surge protection on all Gigabit Ethernet ports
IEEE 802.3D/802.1s Spanning Tree
Loopback Detection (LBD)
L3 Features Static Route
RIP
RIPng


DGS-3130-30TS: 24 x 10/100/1000BASE-T
2 x 10GBASE-T
4 x 10G SFP+



Optional Accessories

DEM-431XT

SFP+ 10GBASE-SR Multi-Mode Fibre Transceiver (300m)

DEM-432XT

SFP+ 10GBASE-LR Multi-Mode Fibre Transceiver (10 km)

DEM-CB100S

1mt 10G SFP+ Direct Attach Cable (DAC)

DEM-CB300S

3mt 10G SFP+ Direct Attach Cable (DAC)

DPS-500A

AC Redundant Power Supply



Highights:

2 x 10GBASE-T, 4x SFP+ 10G ports Physical Stacking Layer 2 Features Layer 3 Features   Connect to areas of your network at 10G speeds, and reach even further distances with fibre optic cabling.   Up to 9 units per stack1, with a maximum of 324 ports, and up to 80GB of bandwidth.   Such as flow control, link aggregation, Ethernet Ring Protection Switching (ERPS), Spanning Tree Protocols, Loopback Detection, IGMP/MLD Snooping.   Including up to 16 IP Interfaces, IGMP Filtering, Neighbor Discovery Protocol (ND), ARP Proxy, VRRP. RIPv1/v2/ng Static Routing Industry Standard CLI Dual Image   Determines the best route to a destination in the network.   Route Layer 3 traffic between switches, even if they're segmented in VLANs.   Supports a full industry standard Command-Line Interface for system management.   Risk-free configuration testing. Greater port density. Powerful Layer 3 features.

Designed for small to medium-sized business networks, the unified software incorporates Layer 2 and Layer 3 features, with 10-Gigabit ports, greater port density thanks to physical stacking, all of which enables the DGS-3130 Series to be deployed in a variety of environments and topologies, including Metro Ethernet deployments. World-class reliability

Advanced L2 and L3 features including port security, Storm Control, Spanning Tree Protocols, IGMP/MLD Snooping, and IPv6 ND. Management options like a multilingual web-UI, and industry standard CLI support, with support for multiple images and multiple configurations.

6x 10-Gigabit ports, physical stacking for more ports, and they have built-in G.8032 Ethernet Ring Protection Switching (ERPS) to help minimise recovery times to 50 ms. An USB 2.0 interface to store config files, boot images, and syslog. As well as support for an additional external redundant power supply on all models to ensure maximum uptime.

Comprehensive security.

Includes the latest security such as Multi-layer and Packet Content Access Control Lists (ACL), and Storm Control. And our exclusive D-Link Safeguard Engine has been designed to guard against traffic flooding caused by malicious attacks and protect your business network uptime.

IP-MAC-Port Binding allows you to bind a source IP address with an associated MAC and define the port number to enhance user access control. And DHCP Snooping makes the switch learn IP/MAC pairs by snooping DHCP packets and saving them to the IMPB whitelist, giving you extra control.

Easy Access Control policies.

They feature multiple authentication mechanisms such as 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC) for strict access control and an easy deployment. After authentication, individual policies such as VLAN membership, Quality of Service (QoS) policies, and ACL rules can be assigned to each host.

Support for the Microsoft® NAP policy enforcement allows you to protect network assets from compromised computers by enforcing compliance with network health policies.

Versatile traffic management.

A rich set of multi-layer QoS/CoS features ensure that critical network services such as VoIP, video conferences, IPTV, and IP surveillance are always given high priority, and 10-Gigabit ports deliver the speed you need. Traffic Shaping features guarantee bandwidth for these services even when the network is busy. L2 Multicast support enables the DGS-3130 Series to handle growing IPTV applications.

Host-based IGMP/MLD Snooping allows multiple multicast subscribers per physical interface while ISM VLAN allows the switches to send multicast streams in a multicast VLAN to save bandwidth, and to provide better security to the backbone network. The ISM VLAN profiles allow you to bind or replace the pre-defined multicast registration information to subscriber ports quickly and easily. Selective Q-in-Q enables you to be selective over VLAN traffic.

1 When stacking the DGS-3130-30TS/30S/30PS models, the stacking cost is 1 per unit so the maximum units per stack is 9. When stacking the DGS-3130-54TS/54S/54PS models, the stacking cost is 2 per unit so the maximum units per stack is 6. When stacking different models in the same stack, switches can be stacked up to a maximum of 12 stacking cost per stack. For example: 2 x DGS-3130-30TS (2 stacking cost) + 2 x DGS-3130-30S (2 stacking cost) + 4 x DGS-3130-54TS (8 stacking cost) consumes a total stacking cost of 12 (2+2+8).

The all-new DGS-3130 Series Gigabit Layer 3 Stackable Managed Switches are designed to address the needs of small to medium-sized business networks. A unified software image incorporates L2 and L3 features enabling the family to be deployed in a variety of environments and topologies. Together the hardware and software enhancements combine to create a family of powerful, flexible and cost-effective switches.

The DGS-3130-30S switch has 24 gigabit SFP ports with six embedded 10G uplink/stacking ports. Two 10GBASE-T ports and four 10G SFP+ ports.

Features:

Reliability Redundant power supply (RPS) support
Ethernet Ring Protection Switching (ERPS) for single ring topologies
Embedded 6 kV surge protection on all Gigabit Ethernet ports
IEEE 802.3D/802.1s Spanning Tree
Loopback Detection (LBD)
L3 Features Static Route
RIP
RIPng


DGS-3130-30S: 24 x SFP Ports
2 x 10GBASE-T
4 x 10G SFP+



Optional Accessories

DEM-310GT

1000BASE-LX, Single-mode, 10 km

DEM-312GT2

1000BASE-SX Multi-mode,2 km

DEM-431XT

SFP+ 10GBASE-SR Multi-Mode Fibre Transceiver (300m)

DEM-432XT

SFP+ 10GBASE-LR Multi-Mode Fibre Transceiver (10 km)

DEM-CB100S

1mt 10G SFP+ Direct Attach Cable (DAC)

DEM-CB300S

3mt 10G SFP+ Direct Attach Cable (DAC)

DPS-500A

AC Redundant Power Supply



Highights:

2 x 10GBASE-T, 4x SFP+ 10G ports Physical Stacking Layer 2 Features Layer 3 Features   Connect to areas of your network at 10G speeds, and reach even further distances with fibre optic cabling.   Up to 9 units per stack1, with a maximum of 324 ports, and up to 80GB of bandwidth.   Such as flow control, link aggregation, Ethernet Ring Protection Switching (ERPS), Spanning Tree Protocols, Loopback Detection, IGMP/MLD Snooping.   Including up to 16 IP Interfaces, IGMP Filtering, Neighbor Discovery Protocol (ND), ARP Proxy, VRRP. RIPv1/v2/ng Static Routing Industry Standard CLI Dual Image   Determines the best route to a destination in the network.   Route Layer 3 traffic between switches, even if they're segmented in VLANs.   Supports a full industry standard Command-Line Interface for system management.   Risk-free configuration testing. Greater port density. Powerful Layer 3 features.

Designed for small to medium-sized business networks, the unified software incorporates Layer 2 and Layer 3 features, with 10-Gigabit ports, greater port density thanks to physical stacking, all of which enables the DGS-3130 Series to be deployed in a variety of environments and topologies, including Metro Ethernet deployments. World-class reliability

Advanced L2 and L3 features including port security, Storm Control, Spanning Tree Protocols, IGMP/MLD Snooping, and IPv6 ND. Management options like a multilingual web-UI, and industry standard CLI support, with support for multiple images and multiple configurations.

6x 10-Gigabit ports, physical stacking for more ports, and they have built-in G.8032 Ethernet Ring Protection Switching (ERPS) to help minimise recovery times to 50 ms. An USB 2.0 interface to store config files, boot images, and syslog. As well as support for an additional external redundant power supply on all models to ensure maximum uptime.

Comprehensive security.

Includes the latest security such as Multi-layer and Packet Content Access Control Lists (ACL), and Storm Control. And our exclusive D-Link Safeguard Engine has been designed to guard against traffic flooding caused by malicious attacks and protect your business network uptime.

IP-MAC-Port Binding allows you to bind a source IP address with an associated MAC and define the port number to enhance user access control. And DHCP Snooping makes the switch learn IP/MAC pairs by snooping DHCP packets and saving them to the IMPB whitelist, giving you extra control.

Easy Access Control policies.

They feature multiple authentication mechanisms such as 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC) for strict access control and an easy deployment. After authentication, individual policies such as VLAN membership, Quality of Service (QoS) policies, and ACL rules can be assigned to each host.

Support for the Microsoft® NAP policy enforcement allows you to protect network assets from compromised computers by enforcing compliance with network health policies.

Versatile traffic management.

A rich set of multi-layer QoS/CoS features ensure that critical network services such as VoIP, video conferences, IPTV, and IP surveillance are always given high priority, and 10-Gigabit ports deliver the speed you need. Traffic Shaping features guarantee bandwidth for these services even when the network is busy. L2 Multicast support enables the DGS-3130 Series to handle growing IPTV applications.

Host-based IGMP/MLD Snooping allows multiple multicast subscribers per physical interface while ISM VLAN allows the switches to send multicast streams in a multicast VLAN to save bandwidth, and to provide better security to the backbone network. The ISM VLAN profiles allow you to bind or replace the pre-defined multicast registration information to subscriber ports quickly and easily. Selective Q-in-Q enables you to be selective over VLAN traffic.

1 When stacking the DGS-3130-30TS/30S/30PS models, the stacking cost is 1 per unit so the maximum units per stack is 9. When stacking the DGS-3130-54TS/54S/54PS models, the stacking cost is 2 per unit so the maximum units per stack is 6. When stacking different models in the same stack, switches can be stacked up to a maximum of 12 stacking cost per stack. For example: 2 x DGS-3130-30TS (2 stacking cost) + 2 x DGS-3130-30S (2 stacking cost) + 4 x DGS-3130-54TS (8 stacking cost) consumes a total stacking cost of 12 (2+2+8).

The all-new DGS-3130 Series Gigabit Layer 3 Stackable Managed Switches are designed to address the needs of small to medium-sized business networks. A unified software image incorporates L2 and L3 features enabling the family to be deployed in a variety of environments and topologies. Together the hardware and software enhancements combine to create a family of powerful, flexible and cost-effective switches.

The DGS-3130-30PS switch has 24 PoE+ gigabit ports with six embedded 10G uplink/stacking ports. Two 10GBASE-T ports and four 10G SFP+ ports.

Features:

Reliability Redundant power supply (RPS) support
Ethernet Ring Protection Switching (ERPS) for single ring topologies
Embedded 6 kV surge protection on all Gigabit Ethernet ports
IEEE 802.3D/802.1s Spanning Tree
Loopback Detection (LBD)
L3 Features Static Route
RIP
RIPng


DGS-3130-30PS: 24 x 10/100/1000BASE-T PoE Ports
2 x 10GBASE-T
4 x 10G SFP+



Optional Accessories

DEM-431XT

SFP+ 10GBASE-SR Multi-Mode Fibre Transceiver (300m)

DEM-432XT

SFP+ 10GBASE-LR Multi-Mode Fibre Transceiver (10 km)

DEM-CB100S

1mt 10G SFP+ Direct Attach Cable (DAC)

DEM-CB300S

3mt 10G SFP+ Direct Attach Cable (DAC)

DPS-500A

AC Redundant Power Supply

DPS-700

589 Watt Redundant Power Supply



Highights:

2 x 10GBASE-T, 4x SFP+ 10G ports Physical Stacking Layer 2 Features Layer 3 Features   Connect to areas of your network at 10G speeds, and reach even further distances with fibre optic cabling.   Up to 9 units per stack1, with a maximum of 324 ports, and up to 80GB of bandwidth.   Such as flow control, link aggregation, Ethernet Ring Protection Switching (ERPS), Spanning Tree Protocols, Loopback Detection, IGMP/MLD Snooping.   Including up to 16 IP Interfaces, IGMP Filtering, Neighbor Discovery Protocol (ND), ARP Proxy, VRRP. RIPv1/v2/ng Static Routing Industry Standard CLI Dual Image   Determines the best route to a destination in the network.   Route Layer 3 traffic between switches, even if they're segmented in VLANs.   Supports a full industry standard Command-Line Interface for system management.   Risk-free configuration testing. Greater port density. Powerful Layer 3 features.

Designed for small to medium-sized business networks, the unified software incorporates Layer 2 and Layer 3 features, with 10-Gigabit ports, greater port density thanks to physical stacking, all of which enables the DGS-3130 Series to be deployed in a variety of environments and topologies, including Metro Ethernet deployments. World-class reliability

Advanced L2 and L3 features including port security, Storm Control, Spanning Tree Protocols, IGMP/MLD Snooping, and IPv6 ND. Management options like a multilingual web-UI, and industry standard CLI support, with support for multiple images and multiple configurations.

6x 10-Gigabit ports, physical stacking for more ports, and they have built-in G.8032 Ethernet Ring Protection Switching (ERPS) to help minimise recovery times to 50 ms. An USB 2.0 interface to store config files, boot images, and syslog. As well as support for an additional external redundant power supply on all models to ensure maximum uptime.

Comprehensive security.

Includes the latest security such as Multi-layer and Packet Content Access Control Lists (ACL), and Storm Control. And our exclusive D-Link Safeguard Engine has been designed to guard against traffic flooding caused by malicious attacks and protect your business network uptime.

IP-MAC-Port Binding allows you to bind a source IP address with an associated MAC and define the port number to enhance user access control. And DHCP Snooping makes the switch learn IP/MAC pairs by snooping DHCP packets and saving them to the IMPB whitelist, giving you extra control.

Easy Access Control policies.

They feature multiple authentication mechanisms such as 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC) for strict access control and an easy deployment. After authentication, individual policies such as VLAN membership, Quality of Service (QoS) policies, and ACL rules can be assigned to each host.

Support for the Microsoft® NAP policy enforcement allows you to protect network assets from compromised computers by enforcing compliance with network health policies.

Versatile traffic management.

A rich set of multi-layer QoS/CoS features ensure that critical network services such as VoIP, video conferences, IPTV, and IP surveillance are always given high priority, and 10-Gigabit ports deliver the speed you need. Traffic Shaping features guarantee bandwidth for these services even when the network is busy. L2 Multicast support enables the DGS-3130 Series to handle growing IPTV applications.

Host-based IGMP/MLD Snooping allows multiple multicast subscribers per physical interface while ISM VLAN allows the switches to send multicast streams in a multicast VLAN to save bandwidth, and to provide better security to the backbone network. The ISM VLAN profiles allow you to bind or replace the pre-defined multicast registration information to subscriber ports quickly and easily. Selective Q-in-Q enables you to be selective over VLAN traffic.

PoE+ with budgets up to 740W

The DGS-3130-30PS has a 370W PoE power budget. Or utilise a total of 740W when adding a redundant power supply.

1 When stacking the DGS-3130-30TS/30S/30PS models, the stacking cost is 1 per unit so the maximum units per stack is 9. When stacking the DGS-3130-54TS/54S/54PS models, the stacking cost is 2 per unit so the maximum units per stack is 6. When stacking different models in the same stack, switches can be stacked up to a maximum of 12 stacking cost per stack. For example: 2 x DGS-3130-30TS (2 stacking cost) + 2 x DGS-3130-30S (2 stacking cost) + 4 x DGS-3130-54TS (8 stacking cost) consumes a total stacking cost of 12 (2+2+8).

The all-new DGS-3130 Series Gigabit Layer 3 Stackable Managed Switches are designed to address the needs of small to medium-sized business networks. A unified software image incorporates L2 and L3 features enabling the family to be deployed in a variety of environments and topologies. Together the hardware and software enhancements combine to create a family of powerful, flexible and cost-effective switches.

The DGS-3130-54TS switch has 48 gigabit ports with six embedded 10G uplink/stacking ports. Two 10GBASE-T ports and four 10G SFP+ ports.

Features:

Reliability Redundant power supply (RPS) support
Ethernet Ring Protection Switching (ERPS) for single ring topologies
Embedded 6 kV surge protection on all Gigabit Ethernet ports
IEEE 802.3D/802.1s Spanning Tree
Loopback Detection (LBD)
L3 Features Static Route
RIP
RIPng


DGS-3130-54TS: 48 x 10/100/1000BASE-T
2 x 10GBASE-T
4 x 10G SFP+



Optional Accessories

DEM-431XT

SFP+ 10GBASE-SR Multi-Mode Fibre Transceiver (300m)

DEM-432XT

SFP+ 10GBASE-LR Multi-Mode Fibre Transceiver (10 km)

DEM-CB100S

1mt 10G SFP+ Direct Attach Cable (DAC)

DEM-CB300S

3mt 10G SFP+ Direct Attach Cable (DAC)

DPS-500A

AC Redundant Power Supply



Highights:

2 x 10GBASE-T, 4x SFP+ 10G ports Physical Stacking Layer 2 Features Layer 3 Features   Connect to areas of your network at 10G speeds, and reach even further distances with fibre optic cabling.   Up to 9 units per stack1, with a maximum of 324 ports, and up to 80GB of bandwidth.   Such as flow control, link aggregation, Ethernet Ring Protection Switching (ERPS), Spanning Tree Protocols, Loopback Detection, IGMP/MLD Snooping.   Including up to 16 IP Interfaces, IGMP Filtering, Neighbor Discovery Protocol (ND), ARP Proxy, VRRP. RIPv1/v2/ng Static Routing Industry Standard CLI Dual Image   Determines the best route to a destination in the network.   Route Layer 3 traffic between switches, even if they're segmented in VLANs.   Supports a full industry standard Command-Line Interface for system management.   Risk-free configuration testing. Greater port density. Powerful Layer 3 features.

Designed for small to medium-sized business networks, the unified software incorporates Layer 2 and Layer 3 features, with 10-Gigabit ports, greater port density thanks to physical stacking, all of which enables the DGS-3130 Series to be deployed in a variety of environments and topologies, including Metro Ethernet deployments. World-class reliability

Advanced L2 and L3 features including port security, Storm Control, Spanning Tree Protocols, IGMP/MLD Snooping, and IPv6 ND. Management options like a multilingual web-UI, and industry standard CLI support, with support for multiple images and multiple configurations.

6x 10-Gigabit ports, physical stacking for more ports, and they have built-in G.8032 Ethernet Ring Protection Switching (ERPS) to help minimise recovery times to 50 ms. An USB 2.0 interface to store config files, boot images, and syslog. As well as support for an additional external redundant power supply on all models to ensure maximum uptime.

Comprehensive security.

Includes the latest security such as Multi-layer and Packet Content Access Control Lists (ACL), and Storm Control. And our exclusive D-Link Safeguard Engine has been designed to guard against traffic flooding caused by malicious attacks and protect your business network uptime.

IP-MAC-Port Binding allows you to bind a source IP address with an associated MAC and define the port number to enhance user access control. And DHCP Snooping makes the switch learn IP/MAC pairs by snooping DHCP packets and saving them to the IMPB whitelist, giving you extra control.

Easy Access Control policies.

They feature multiple authentication mechanisms such as 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC) for strict access control and an easy deployment. After authentication, individual policies such as VLAN membership, Quality of Service (QoS) policies, and ACL rules can be assigned to each host.

Support for the Microsoft® NAP policy enforcement allows you to protect network assets from compromised computers by enforcing compliance with network health policies.

Versatile traffic management.

A rich set of multi-layer QoS/CoS features ensure that critical network services such as VoIP, video conferences, IPTV, and IP surveillance are always given high priority, and 10-Gigabit ports deliver the speed you need. Traffic Shaping features guarantee bandwidth for these services even when the network is busy. L2 Multicast support enables the DGS-3130 Series to handle growing IPTV applications.

Host-based IGMP/MLD Snooping allows multiple multicast subscribers per physical interface while ISM VLAN allows the switches to send multicast streams in a multicast VLAN to save bandwidth, and to provide better security to the backbone network. The ISM VLAN profiles allow you to bind or replace the pre-defined multicast registration information to subscriber ports quickly and easily. Selective Q-in-Q enables you to be selective over VLAN traffic.

1 When stacking the DGS-3130-30TS/30S/30PS models, the stacking cost is 1 per unit so the maximum units per stack is 9. When stacking the DGS-3130-54TS/54S/54PS models, the stacking cost is 2 per unit so the maximum units per stack is 6. When stacking different models in the same stack, switches can be stacked up to a maximum of 12 stacking cost per stack. For example: 2 x DGS-3130-30TS (2 stacking cost) + 2 x DGS-3130-30S (2 stacking cost) + 4 x DGS-3130-54TS (8 stacking cost) consumes a total stacking cost of 12 (2+2+8).

The DGS-3630 Series Gigabit L3 Stackable Managed Switches are designed for Small to Medium-sized Businesses (SMBs), Small to Medium-sized Enterprises (SMEs), large enterprises, and Internet Service Providers (ISPs). They deliver high performance, flexibility, fault tolerance, and advanced software features for maximum return on investment. With Gigabit Ethernet, SFP, 10 GbE SFP+, security features, and advanced Quality of Service (QoS), the DGS-3630 Series can act as core, distribution or access layer switches. High port densities, switch stacking, and easy management make the DGS-3630 Series suitable for a variety of applications..

Standard Software Image

The DGS-3630-28TC/SI comes with the Standard Image which provides core SMB and SME functionality such as L2 switching, entry-level routing, L2 multicast, advanced QoS, Operations, Administration, and Maintenance (OAM), and robust security features. Other software options/upgrades include:

The Enhanced Image supports all the features of the Standard Image in addition to full L3 routing for enterprise integration, including OSPF, BGP, VRF-Lite and L3 multicast. The MPLS Image offers all the features of the Standard and Enhanced Images in addition to VPN services for ISPs, including IS-IS and MPLS L2/L3 VPN. With multiple software images, only the required features need to be installed, providing a flexible approach to software management. The DGS-3630-28TC switch has 20 x 10/100/1000BASE-T ports, 4 Combo SFP Ports and 4 10G uplink/stacking ports.

Features:

High Availability and Flexibility

20 x 10/100/1000BASE-T ports
4 Combo 10/100/1000BASE-T/SFP ports
4 10 GbE SFP+ uplink ports
Switch Resource Management (SRM) for flexible management of system resources
6 kV surge protection on all RJ-45 access ports
Reliability Redundant power supply (RPS) support
Ethernet Ring Protection Switching (ERPS) for single ring topologies
Embedded 6 kV surge protection on all Gigabit Ethernet ports
IEEE 802.3D/802.1s Spanning Tree
Loopback Detection (LBD)
High Bandwidth Stacking

Physical stack of up to 9 units, 432 GbE ports
Supports long-distance stacking over fiber
80 Gbps per device physical stacking bandwidth

DGS-3630-28TC: 20 x Gigabit SFP Ports
4 Combo 10/100/1000BASE-T/SFP ports
4 10 GbE SFP+ uplink ports



Optional Accessories

DEM-310GT

1000BASE-LX, Single-mode, 10 km

DEM-311GT

1000Base-SX Multi-mode Fibre Transceiver

DEM-312GT2

1000BASE-SX Multi-mode,2 km

DEM-431XT

SFP+ 10GBASE-SR Multi-Mode Fibre Transceiver (300m)

DEM-432XT

SFP+ 10GBASE-LR Multi-Mode Fibre Transceiver (10 km)

DEM-CB100S

1mt 10G SFP+ Direct Attach Cable (DAC)

DEM-CB300S

3mt 10G SFP+ Direct Attach Cable (DAC)

DPS-500A

AC Redundant Power Supply




Stackable Managed Switches

Designed for Small to Medium Businesses, Enterprises and ISPs
Deliver high performance, flexibility, fault tolerance, and advanced software features
Gigabit Ethernet SFP, 10 GbE SFP+, security features, and advanced Quality of Service (QoS), the DGS-3630 Series can act as core, distribution or access layer switches
High port densities, switch stacking, and easy management make the DGS-3630 Series suitable for a variety of applications
Versatile Management

The DGS-3630 Series provides: Network Assistant Utility
Industry-standard CLI
Intuitive web-based management interface
Support for SNMP allows centralized management of a large number of devices and out-of-band management is available via a dedicated console port.
A mini-USB console port allows the DGS-3630 Series to be managed without any extra connectors, and a USB Type A port can be used to store logs, configuration, and firmware images.
High Availability and Flexibility

Includes stacking technology, which allows multiple switches to be combined to form a single physical or virtual stack.

Scale your network using just a stacking cable and without the need for stacking modules.

Increased redundancy over multiple physical units, simplifies management and provides a single IP address to manage all members in the stack.

Security, Performance & Availability

Robust set of QoS features helps ensure that critical network services such as Voice over IP and video conferencing are given high priority through the network.

The D-Link Safeguard Engine increases the switch’s reliability, serviceability, and availability by preventing malicious flooding traffic caused by worms or virus attacks.

The DGS-3630 Series Gigabit L3 Stackable Managed Switches are designed for Small to Medium-sized Businesses (SMBs), Small to Medium-sized Enterprises (SMEs), large enterprises, and Internet Service Providers (ISPs). They deliver high performance, flexibility, fault tolerance, and advanced software features for maximum return on investment. With Gigabit Ethernet, SFP, 10 GbE SFP+, security features, and advanced Quality of Service (QoS), the DGS-3630 Series can act as core, distribution or access layer switches. High port densities, switch stacking, and easy management make the DGS-3630 Series suitable for a variety of applications..

Standard Software Image

The DGS-3630-28SC/SI comes with the Standard Image which provides core SMB and SME functionality such as L2 switching, entry-level routing, L2 multicast, advanced QoS, Operations, Administration, and Maintenance (OAM), and robust security features. Other software options/upgrades include:

The Enhanced Image supports all the features of the Standard Image in addition to full L3 routing for enterprise integration, including OSPF, BGP, VRF-Lite and L3 multicast. The MPLS Image offers all the features of the Standard and Enhanced Images in addition to VPN services for ISPs, including IS-IS and MPLS L2/L3 VPN. With multiple software images, only the required features need to be installed, providing a flexible approach to software management. The DGS-3630-28SC switch has 20 gigabit SFP Ports, 4 Combo SFP Ports and 4 10G uplink/stacking ports.

Features:

High Availability and Flexibility

20 Gigabit SFP ports
4 Combo 10/100/1000BASE-T/SFP ports
4 10 GbE SFP+ uplink ports
Switch Resource Management (SRM) for flexible management of system resources
6 kV surge protection on all RJ-45 access ports
Reliability Redundant power supply (RPS) support
Ethernet Ring Protection Switching (ERPS) for single ring topologies
Embedded 6 kV surge protection on all Gigabit Ethernet ports
IEEE 802.3D/802.1s Spanning Tree
Loopback Detection (LBD)
High Bandwidth Stacking

Physical stack of up to 9 units, 432 GbE ports
Supports long-distance stacking over fiber
80 Gbps per device physical stacking bandwidth

DGS-3630-28SC: 20 x Gigabit SFP Ports
4 Combo 10/100/1000BASE-T/SFP ports
4 10 GbE SFP+ uplink ports



Optional Accessories

DEM-310GT

1000BASE-LX, Single-mode, 10 km

DEM-311GT

1000Base-SX Multi-mode Fibre Transceiver

DEM-312GT2

1000BASE-SX Multi-mode,2 km

DEM-431XT

SFP+ 10GBASE-SR Multi-Mode Fibre Transceiver (300m)

DEM-432XT

SFP+ 10GBASE-LR Multi-Mode Fibre Transceiver (10 km)

DEM-CB100S

1mt 10G SFP+ Direct Attach Cable (DAC)

DEM-CB300S

3mt 10G SFP+ Direct Attach Cable (DAC)

DPS-500A

AC Redundant Power Supply




Stackable Managed Switches

Designed for Small to Medium Businesses, Enterprises and ISPs
Deliver high performance, flexibility, fault tolerance, and advanced software features
Gigabit Ethernet SFP, 10 GbE SFP+, security features, and advanced Quality of Service (QoS), the DGS-3630 Series can act as core, distribution or access layer switches
High port densities, switch stacking, and easy management make the DGS-3630 Series suitable for a variety of applications
Versatile Management

The DGS-3630 Series provides: Network Assistant Utility
Industry-standard CLI
Intuitive web-based management interface
Support for SNMP allows centralized management of a large number of devices and out-of-band management is available via a dedicated console port.
A mini-USB console port allows the DGS-3630 Series to be managed without any extra connectors, and a USB Type A port can be used to store logs, configuration, and firmware images.
High Availability and Flexibility

Includes stacking technology, which allows multiple switches to be combined to form a single physical or virtual stack.

Scale your network using just a stacking cable and without the need for stacking modules.

Increased redundancy over multiple physical units, simplifies management and provides a single IP address to manage all members in the stack.

Security, Performance & Availability

Robust set of QoS features helps ensure that critical network services such as Voice over IP and video conferencing are given high priority through the network.

The D-Link Safeguard Engine increases the switch’s reliability, serviceability, and availability by preventing malicious flooding traffic caused by worms or virus attacks.

The all-new DGS-3130 Series Gigabit Layer 3 Stackable Managed Switches are designed to address the needs of small to medium-sized business networks. A unified software image incorporates L2 and L3 features enabling the family to be deployed in a variety of environments and topologies. Together the hardware and software enhancements combine to create a family of powerful, flexible and cost-effective switches.

The DGS-3130-54S switch has 48 gigabit SFP ports with six embedded 10G uplink/stacking ports. Two 10GBASE-T ports and four 10G SFP+ ports.

Features:

Reliability Redundant power supply (RPS) support
Ethernet Ring Protection Switching (ERPS) for single ring topologies
Embedded 6 kV surge protection on all Gigabit Ethernet ports
IEEE 802.3D/802.1s Spanning Tree
Loopback Detection (LBD)
L3 Features Static Route
RIP
RIPng


DGS-3130-54S: 48 x SFP Ports
2 x 10GBASE-T
4 x 10G SFP+



Optional Accessories

DEM-310GT

1000BASE-LX, Single-mode, 10 km

DEM-312GT2

1000BASE-SX Multi-mode,2 km

DEM-431XT

SFP+ 10GBASE-SR Multi-Mode Fibre Transceiver (300m)

DEM-432XT

SFP+ 10GBASE-LR Multi-Mode Fibre Transceiver (10 km)

DEM-CB100S

1mt 10G SFP+ Direct Attach Cable (DAC)

DEM-CB300S

3mt 10G SFP+ Direct Attach Cable (DAC)

DPS-500A

AC Redundant Power Supply



Highights:

2 x 10GBASE-T, 4x SFP+ 10G ports Physical Stacking Layer 2 Features Layer 3 Features   Connect to areas of your network at 10G speeds, and reach even further distances with fibre optic cabling.   Up to 9 units per stack1, with a maximum of 324 ports, and up to 80GB of bandwidth.   Such as flow control, link aggregation, Ethernet Ring Protection Switching (ERPS), Spanning Tree Protocols, Loopback Detection, IGMP/MLD Snooping.   Including up to 16 IP Interfaces, IGMP Filtering, Neighbor Discovery Protocol (ND), ARP Proxy, VRRP. RIPv1/v2/ng Static Routing Industry Standard CLI Dual Image   Determines the best route to a destination in the network.   Route Layer 3 traffic between switches, even if they're segmented in VLANs.   Supports a full industry standard Command-Line Interface for system management.   Risk-free configuration testing. Greater port density. Powerful Layer 3 features.

Designed for small to medium-sized business networks, the unified software incorporates Layer 2 and Layer 3 features, with 10-Gigabit ports, greater port density thanks to physical stacking, all of which enables the DGS-3130 Series to be deployed in a variety of environments and topologies, including Metro Ethernet deployments. World-class reliability

Advanced L2 and L3 features including port security, Storm Control, Spanning Tree Protocols, IGMP/MLD Snooping, and IPv6 ND. Management options like a multilingual web-UI, and industry standard CLI support, with support for multiple images and multiple configurations.

6x 10-Gigabit ports, physical stacking for more ports, and they have built-in G.8032 Ethernet Ring Protection Switching (ERPS) to help minimise recovery times to 50 ms. An USB 2.0 interface to store config files, boot images, and syslog. As well as support for an additional external redundant power supply on all models to ensure maximum uptime.

Comprehensive security.

Includes the latest security such as Multi-layer and Packet Content Access Control Lists (ACL), and Storm Control. And our exclusive D-Link Safeguard Engine has been designed to guard against traffic flooding caused by malicious attacks and protect your business network uptime.

IP-MAC-Port Binding allows you to bind a source IP address with an associated MAC and define the port number to enhance user access control. And DHCP Snooping makes the switch learn IP/MAC pairs by snooping DHCP packets and saving them to the IMPB whitelist, giving you extra control.

Easy Access Control policies.

They feature multiple authentication mechanisms such as 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC) for strict access control and an easy deployment. After authentication, individual policies such as VLAN membership, Quality of Service (QoS) policies, and ACL rules can be assigned to each host.

Support for the Microsoft® NAP policy enforcement allows you to protect network assets from compromised computers by enforcing compliance with network health policies.

Versatile traffic management.

A rich set of multi-layer QoS/CoS features ensure that critical network services such as VoIP, video conferences, IPTV, and IP surveillance are always given high priority, and 10-Gigabit ports deliver the speed you need. Traffic Shaping features guarantee bandwidth for these services even when the network is busy. L2 Multicast support enables the DGS-3130 Series to handle growing IPTV applications.

Host-based IGMP/MLD Snooping allows multiple multicast subscribers per physical interface while ISM VLAN allows the switches to send multicast streams in a multicast VLAN to save bandwidth, and to provide better security to the backbone network. The ISM VLAN profiles allow you to bind or replace the pre-defined multicast registration information to subscriber ports quickly and easily. Selective Q-in-Q enables you to be selective over VLAN traffic.

1 When stacking the DGS-3130-30TS/30S/30PS models, the stacking cost is 1 per unit so the maximum units per stack is 9. When stacking the DGS-3130-54TS/54S/54PS models, the stacking cost is 2 per unit so the maximum units per stack is 6. When stacking different models in the same stack, switches can be stacked up to a maximum of 12 stacking cost per stack. For example: 2 x DGS-3130-30TS (2 stacking cost) + 2 x DGS-3130-30S (2 stacking cost) + 4 x DGS-3130-54TS (8 stacking cost) consumes a total stacking cost of 12 (2+2+8).

The all-new DGS-3130 Series Gigabit Layer 3 Stackable Managed Switches are designed to address the needs of small to medium-sized business networks. A unified software image incorporates L2 and L3 features enabling the family to be deployed in a variety of environments and topologies. Together the hardware and software enhancements combine to create a family of powerful, flexible and cost-effective switches.

The DGS-3130-54PS switch has 48 PoE+ gigabit ports with six embedded 10G uplink/stacking ports. Two 10GBASE-T ports and four 10G SFP+ ports.

Features:

Reliability Redundant power supply (RPS) support
Ethernet Ring Protection Switching (ERPS) for single ring topologies
Embedded 6 kV surge protection on all Gigabit Ethernet ports
IEEE 802.3D/802.1s Spanning Tree
Loopback Detection (LBD)
L3 Features Static Route
RIP
RIPng


DGS-3130-54PS: 48 x 10/100/1000BASE-T PoE Ports
2 x 10GBASE-T
4 x 10G SFP+



Optional Accessories

DEM-431XT

SFP+ 10GBASE-SR Multi-Mode Fibre Transceiver (300m)

DEM-432XT

SFP+ 10GBASE-LR Multi-Mode Fibre Transceiver (10 km)

DEM-CB100S

1mt 10G SFP+ Direct Attach Cable (DAC)

DEM-CB300S

3mt 10G SFP+ Direct Attach Cable (DAC)

DPS-500A

AC Redundant Power Supply

DPS-700

589 Watt Redundant Power Supply



Highights:

2 x 10GBASE-T, 4x SFP+ 10G ports Physical Stacking Layer 2 Features Layer 3 Features   Connect to areas of your network at 10G speeds, and reach even further distances with fibre optic cabling.   Up to 9 units per stack1, with a maximum of 324 ports, and up to 80GB of bandwidth.   Such as flow control, link aggregation, Ethernet Ring Protection Switching (ERPS), Spanning Tree Protocols, Loopback Detection, IGMP/MLD Snooping.   Including up to 16 IP Interfaces, IGMP Filtering, Neighbor Discovery Protocol (ND), ARP Proxy, VRRP. RIPv1/v2/ng Static Routing Industry Standard CLI Dual Image   Determines the best route to a destination in the network.   Route Layer 3 traffic between switches, even if they're segmented in VLANs.   Supports a full industry standard Command-Line Interface for system management.   Risk-free configuration testing. Greater port density. Powerful Layer 3 features.

Designed for small to medium-sized business networks, the unified software incorporates Layer 2 and Layer 3 features, with 10-Gigabit ports, greater port density thanks to physical stacking, all of which enables the DGS-3130 Series to be deployed in a variety of environments and topologies, including Metro Ethernet deployments. World-class reliability

Advanced L2 and L3 features including port security, Storm Control, Spanning Tree Protocols, IGMP/MLD Snooping, and IPv6 ND. Management options like a multilingual web-UI, and industry standard CLI support, with support for multiple images and multiple configurations.

6x 10-Gigabit ports, physical stacking for more ports, and they have built-in G.8032 Ethernet Ring Protection Switching (ERPS) to help minimise recovery times to 50 ms. An USB 2.0 interface to store config files, boot images, and syslog. As well as support for an additional external redundant power supply on all models to ensure maximum uptime.

Comprehensive security.

Includes the latest security such as Multi-layer and Packet Content Access Control Lists (ACL), and Storm Control. And our exclusive D-Link Safeguard Engine has been designed to guard against traffic flooding caused by malicious attacks and protect your business network uptime.

IP-MAC-Port Binding allows you to bind a source IP address with an associated MAC and define the port number to enhance user access control. And DHCP Snooping makes the switch learn IP/MAC pairs by snooping DHCP packets and saving them to the IMPB whitelist, giving you extra control.

Easy Access Control policies.

They feature multiple authentication mechanisms such as 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC) for strict access control and an easy deployment. After authentication, individual policies such as VLAN membership, Quality of Service (QoS) policies, and ACL rules can be assigned to each host.

Support for the Microsoft® NAP policy enforcement allows you to protect network assets from compromised computers by enforcing compliance with network health policies.

Versatile traffic management.

A rich set of multi-layer QoS/CoS features ensure that critical network services such as VoIP, video conferences, IPTV, and IP surveillance are always given high priority, and 10-Gigabit ports deliver the speed you need. Traffic Shaping features guarantee bandwidth for these services even when the network is busy. L2 Multicast support enables the DGS-3130 Series to handle growing IPTV applications.

Host-based IGMP/MLD Snooping allows multiple multicast subscribers per physical interface while ISM VLAN allows the switches to send multicast streams in a multicast VLAN to save bandwidth, and to provide better security to the backbone network. The ISM VLAN profiles allow you to bind or replace the pre-defined multicast registration information to subscriber ports quickly and easily. Selective Q-in-Q enables you to be selective over VLAN traffic.

PoE+ with budgets up to 740W

The DGS-3130-30PS has a 370W PoE power budget. Or utilise a total of 740W when adding a redundant power supply.

1 When stacking the DGS-3130-30TS/30S/30PS models, the stacking cost is 1 per unit so the maximum units per stack is 9. When stacking the DGS-3130-54TS/54S/54PS models, the stacking cost is 2 per unit so the maximum units per stack is 6. When stacking different models in the same stack, switches can be stacked up to a maximum of 12 stacking cost per stack. For example: 2 x DGS-3130-30TS (2 stacking cost) + 2 x DGS-3130-30S (2 stacking cost) + 4 x DGS-3130-54TS (8 stacking cost) consumes a total stacking cost of 12 (2+2+8).

Gigabit L3 Stackable Managed Switches

The DGS-3630 Series Gigabit L3 Stackable Managed Switches are a range of switches designed for Small to Medium Businesses (SMBs), Small to Medium Enterprises (SMEs), enterprises and ISPs. With Gigabit Ethernet SFP, 10 GbE SFP+, security features, and advanced Quality of Service (QoS), the DGS-3630 Series can act as core, distribution or access layer switches.







Product Highlights: High Performance - Gigabit access ports and built-in 10 Gigabit uplinks provide high bandwidth connections for clients, servers, and storage
Flexible Software - Multiple software images provide a flexible approach to software management, allowing only the required features to be installed
High Availability - Up to 9 physical switches can be stacked to create a single virtual switch, providing fault tolerance and increasing network reliability




Stackable Managed Switches Designed for Small to Medium Businesses, Enterprises and ISPs. Deliver high performance, flexibility, fault tolerance, and advanced software features. Gigabit Ethernet SFP, 10 GbE SFP+, security features, and advanced Quality of Service (QoS), the DGS-3630 Series can act as core, distribution or access layer switches. High port densities, switch stacking, and easy management make the DGS-3630 Series suitable for a variety of applications. DGS-3630-28PC and DGS-3630-52PC feature Power over Ethernet, which allows PoE-powered devices to be powered by the switch through a standard Ethernet cable






Outperforming the competition The DGS-3630-28TC was benchmarked against a market leading competitor's device. It matched or exceeded the competitor's performance across all tests despite being significantly lower in price with a much lower power consumption.





Versatile Management The DGS-3630 Series provides: Network Assistant Utility. Industry-standard CLI. Intuitive web-based management interface. Support for SNMP allows centralized management of a large number of devices and out-of-band management is available via a dedicated console port. A mini-USB console port allows the DGS-3630 Series to be managed without any extra connectors, and a USB Type A port can be used to store logs, configuration, and firmware images.







High Availability and Flexibility Includes stacking technology, which allows multiple switches to be combined to form a single physical or virtual stack. Scale your network using just a stacking cable and without the need for stacking modules. Increased redundancy over multiple physical units, simplifies management and provides a single IP address to manage all members in the stack.





Security, Performance & Availability Robust set of QoS features helps ensure that critical network services such as Voice over IP and video conferencing are given high priority through the network. The D-Link Safeguard Engine increases the switch’s reliability, serviceability, and availability by preventing malicious flooding traffic caused by worms or virus attacks.




Multiple Software Images The DGS-3630 Series is designed for use with three different software images: Standard Image (SI) / Enhanced Image (EI) / MPLS Image (MI). Please refer to the Specifications tab or download the product datasheet for more information.













High Availability and Flexibility: 20/44 10/100/1000BASE-T ports or 20 SFP ports
4 Combo 10/100/1000BASE-T/SFP ports
4 10 GbE SFP+ uplink ports
Switch Resource Management (SRM) for flexible management of system resources
6 kV surge protection on all RJ-45 access ports
IEEE 802.3af/at PoE (DGS-3630-28PC/52PC)





Reliability: Redundant Power Supply (RPS) support
IEEE 802.1D/802.1w/802.1s Spanning Tree
Loopback Detection (LBD)
Ethernet Ring Protection Switching (ERPS)





High Bandwidth Stacking: Physical stack of up to 9 units, 432 GbE ports
Supports long-distance stacking over fiber
80 Gbps per device physical stacking bandwidth





Operations, Administration, and Maintenance: IEEE 802.3ah Ethernet Link OAM
IEEE 802.1ag/ITU-T Y.1731 Service OAM





Easy Management: RJ-45/mini-USB console port
Management and alarm ports
USB port for firmware and configuration files
Easy-to-use web GUI and industry-standard CLI




Physical Power Input 100 to 240 VAC 50/60 Hz Maximum Power Consumption 62 W Operating Temperature -5 to 50 °C / 23 to 122 °F Temperature (Storage) -40 to 70 °C / -40 to 158 °F Humidity (Operating) 10% to 95% non-condensing Humidity (Storage) 5% to 95% non-condensing Dimensions 441 x 259.8 x 44 mm / 17.4 x 10.2 x 1.73 in Weight 4.04 kg / 8.91 lbs General Device Interfaces • 44 x 10/100/1000BASE-T ports, 4 x Combo 10/100/1000BASE-T/SFP ports, 4 x 10 GbE SFP+ ports Size 19-inch, 1U rack-mount size Console Port RJ-45 and Mini-USB console ports for out-of-band CLI management Management Port 10/100/1000BASE-T RJ-45 Ethernet port for out-of-band IP management Alarm Port 1 x RJ-45 port USB Port 1 x USB 2.0 Type A port Full specification and details can be found in the

The DGS-3630 Series Gigabit L3 Stackable Managed Switches are designed for Small to Medium-sized Businesses (SMBs), Small to Medium-sized Enterprises (SMEs), large enterprises, and Internet Service Providers (ISPs). They deliver high performance, flexibility, fault tolerance, and advanced software features for maximum return on investment. With Gigabit Ethernet, SFP, 10 GbE SFP+, security features, and advanced Quality of Service (QoS), the DGS-3630 Series can act as core, distribution or access layer switches. High port densities, switch stacking, and easy management make the DGS-3630 Series suitable for a variety of applications..

Standard Software Image

The DGS-3630-28PC/SI comes with the Standard Image which provides core SMB and SME functionality such as L2 switching, entry-level routing, L2 multicast, advanced QoS, Operations, Administration, and Maintenance (OAM), and robust security features. Other software options/upgrades include:

The Enhanced Image supports all the features of the Standard Image in addition to full L3 routing for enterprise integration, including OSPF, BGP, VRF-Lite and L3 multicast. The MPLS Image offers all the features of the Standard and Enhanced Images in addition to VPN services for ISPs, including IS-IS and MPLS L2/L3 VPN. With multiple software images, only the required features need to be installed, providing a flexible approach to software management. The DGS-3630-28PC switch has 20 gigabit PoE+ Ports, 4 Combo SFP Ports and 4 10G uplink/stacking ports.

Features:

High Availability and Flexibility

20 10/100/1000BASE-T ports or 20 SFP ports
4 Combo 10/100/1000BASE-T/SFP ports
4 10 GbE SFP+ uplink ports
Switch Resource Management (SRM) for flexible management of system resources
6 kV surge protection on all RJ-45 access ports
IEEE 802.3af/at PoE
Reliability Redundant power supply (RPS) support
Ethernet Ring Protection Switching (ERPS) for single ring topologies
Embedded 6 kV surge protection on all Gigabit Ethernet ports
IEEE 802.3D/802.1s Spanning Tree
Loopback Detection (LBD)
High Bandwidth Stacking

Physical stack of up to 9 units, 432 GbE ports
Supports long-distance stacking over fiber
80 Gbps per device physical stacking bandwidth

DGS-3630-28PC: 20 x 10/100/1000BASE-T PoE Ports
4 Combo 10/100/1000BASE-T/SFP ports
4 10 GbE SFP+ uplink ports



Optional Accessories

DEM-310GT

1000BASE-LX, Single-mode, 10 km

DEM-311GT

1000Base-SX Multi-mode Fibre Transceiver

DEM-312GT2

1000BASE-SX Multi-mode,2 km

DEM-431XT

SFP+ 10GBASE-SR Multi-Mode Fibre Transceiver (300m)

DEM-432XT

SFP+ 10GBASE-LR Multi-Mode Fibre Transceiver (10 km)

DEM-CB100S

1mt 10G SFP+ Direct Attach Cable (DAC)

DEM-CB300S

3mt 10G SFP+ Direct Attach Cable (DAC)

DPS-500A

AC Redundant Power Supply

DPS-700

589 Watt Redundant Power Supply




Stackable Managed Switches

Designed for Small to Medium Businesses, Enterprises and ISPs
Deliver high performance, flexibility, fault tolerance, and advanced software features
Gigabit Ethernet SFP, 10 GbE SFP+, security features, and advanced Quality of Service (QoS), the DGS-3630 Series can act as core, distribution or access layer switches
High port densities, switch stacking, and easy management make the DGS-3630 Series suitable for a variety of applications
Power over Ethernet, which allows PoE-powered devices to be powered by the switch through a standard Ethernet cable.
Versatile Management

The DGS-3630 Series provides: Network Assistant Utility
Industry-standard CLI
Intuitive web-based management interface
Support for SNMP allows centralized management of a large number of devices and out-of-band management is available via a dedicated console port.
A mini-USB console port allows the DGS-3630 Series to be managed without any extra connectors, and a USB Type A port can be used to store logs, configuration, and firmware images.
High Availability and Flexibility

Includes stacking technology, which allows multiple switches to be combined to form a single physical or virtual stack.

Scale your network using just a stacking cable and without the need for stacking modules.

Increased redundancy over multiple physical units, simplifies management and provides a single IP address to manage all members in the stack.

Security, Performance & Availability

Robust set of QoS features helps ensure that critical network services such as Voice over IP and video conferencing are given high priority through the network.

The D-Link Safeguard Engine increases the switch’s reliability, serviceability, and availability by preventing malicious flooding traffic caused by worms or virus attacks.

Power over Ethernet (PoE) Support

The DGS-3630-28PC features Power over Ethernet, which allows PoE-powered devices to be powered by the switch through a standard Ethernet cable. It supports the IEEE 802.3af PoE and IEEE 802.3at PoE+ standards, providing up to 30 W of power per port. PoE effectively reduces deployment time for PoE devices such as IP cameras, VoIP phones, and access points, and eliminates the cost for additional electrical cabling. It features a 370 W PoE power budget which can be increased to 740 W when outfitted with the DPS-700 redundant power supply, allowing the switches to power even more devices. Additionally, an extended Link Layer Discovery Protocol (LLDP) automatically negotiates and manages the power feed to IEEE 802.3at PoE+ powered devices for optimal power distribution.

The DGS-3630 Series Gigabit L3 Stackable Managed Switches are designed for Small to Medium-sized Businesses (SMBs), Small to Medium-sized Enterprises (SMEs), large enterprises, and Internet Service Providers (ISPs). They deliver high performance, flexibility, fault tolerance, and advanced software features for maximum return on investment. With Gigabit Ethernet, SFP, 10 GbE SFP+, security features, and advanced Quality of Service (QoS), the DGS-3630 Series can act as core, distribution or access layer switches. High port densities, switch stacking, and easy management make the DGS-3630 Series suitable for a variety of applications..

Standard Software Image

The DGS-3630-52PC/SI comes with the Standard Image which provides core SMB and SME functionality such as L2 switching, entry-level routing, L2 multicast, advanced QoS, Operations, Administration, and Maintenance (OAM), and robust security features. Other software options/upgrades include:

The Enhanced Image supports all the features of the Standard Image in addition to full L3 routing for enterprise integration, including OSPF, BGP, VRF-Lite and L3 multicast. The MPLS Image offers all the features of the Standard and Enhanced Images in addition to VPN services for ISPs, including IS-IS and MPLS L2/L3 VPN. With multiple software images, only the required features need to be installed, providing a flexible approach to software management. The DGS-3630-52PC switch has 44 gigabit PoE+ Ports, 4 Combo SFP Ports and 4 10G uplink/stacking ports.

Features:

High Availability and Flexibility

44 10/100/1000BASE-T ports
4 Combo 10/100/1000BASE-T/SFP ports
4 10 GbE SFP+ uplink ports
Switch Resource Management (SRM) for flexible management of system resources
6 kV surge protection on all RJ-45 access ports
IEEE 802.3af/at PoE
Reliability Redundant power supply (RPS) support
Ethernet Ring Protection Switching (ERPS) for single ring topologies
Embedded 6 kV surge protection on all Gigabit Ethernet ports
IEEE 802.3D/802.1s Spanning Tree
Loopback Detection (LBD)
High Bandwidth Stacking

Physical stack of up to 9 units, 432 GbE ports
Supports long-distance stacking over fiber
80 Gbps per device physical stacking bandwidth

DGS-3630-52PC: 44 x 10/100/1000BASE-T PoE Ports
4 Combo 10/100/1000BASE-T/SFP ports
4 10 GbE SFP+ uplink ports



Optional Accessories

DEM-310GT

1000BASE-LX, Single-mode, 10 km

DEM-311GT

1000Base-SX-Multi-mode Fibre Transceiver

DEM-312GT2

1000BASE-SX Multi-mode,2 km

DEM-431XT

SFP+ 10GBASE-SR Multi-Mode Fibre Transceiver (300m)

DEM-432XT

SFP+ 10GBASE-LR Multi-Mode Fibre Transceiver (10 km)

DEM-CB100S

1mt 10G SFP+ Direct Attach Cable (DAC)

DEM-CB300S

3mt 10G SFP+ Direct Attach Cable (DAC)

DPS-500A

AC Redundant Power Supply

DPS-700

589 Watt Redundant Power Supply




Stackable Managed Switches

Designed for Small to Medium Businesses, Enterprises and ISPs
Deliver high performance, flexibility, fault tolerance, and advanced software features
Gigabit Ethernet SFP, 10 GbE SFP+, security features, and advanced Quality of Service (QoS), the DGS-3630 Series can act as core, distribution or access layer switches
High port densities, switch stacking, and easy management make the DGS-3630 Series suitable for a variety of applications
Power over Ethernet, which allows PoE-powered devices to be powered by the switch through a standard Ethernet cable.
Versatile Management

The DGS-3630 Series provides: Network Assistant Utility
Industry-standard CLI
Intuitive web-based management interface
Support for SNMP allows centralized management of a large number of devices and out-of-band management is available via a dedicated console port.
A mini-USB console port allows the DGS-3630 Series to be managed without any extra connectors, and a USB Type A port can be used to store logs, configuration, and firmware images.
High Availability and Flexibility

Includes stacking technology, which allows multiple switches to be combined to form a single physical or virtual stack.

Scale your network using just a stacking cable and without the need for stacking modules.

Increased redundancy over multiple physical units, simplifies management and provides a single IP address to manage all members in the stack.

Security, Performance & Availability

Robust set of QoS features helps ensure that critical network services such as Voice over IP and video conferencing are given high priority through the network.

The D-Link Safeguard Engine increases the switch’s reliability, serviceability, and availability by preventing malicious flooding traffic caused by worms or virus attacks.

Power over Ethernet (PoE) Support

The DGS-3630-52PC features Power over Ethernet, which allows PoE-powered devices to be powered by the switch through a standard Ethernet cable. It supports the IEEE 802.3af PoE and IEEE 802.3at PoE+ standards, providing up to 30 W of power per port. PoE effectively reduces deployment time for PoE devices such as IP cameras, VoIP phones, and access points, and eliminates the cost for additional electrical cabling. It features a 370 W PoE power budget which can be increased to 740 W when outfitted with the DPS-700 redundant power supply, allowing the switches to power even more devices. Additionally, an extended Link Layer Discovery Protocol (LLDP) automatically negotiates and manages the power feed to IEEE 802.3at PoE+ powered devices for optimal power distribution.

Layer 3 Stackable 10G / 100G Managed Switches

DXS-3610-54S - Layer 3 Stackable 10G / 100G Managed, 48-port 10G SFP+, 6-port 100G QSFP28 interfaces switch with Standard Image with 2 full load front-to-back AC PSUs and 5 front-toback fan modules









Product features: High port density: 48 x 10 GbE SFP+, 6 x 100G QSFP+ ports
Stack up to 12 switches (up to 1.2 Tbps stacking bandwidth)
OpenFlow 1.3 compliance for SDN-enabled network compatibility
Modular PSU (1+1) and fan (N+1) with load sharing capabilities
Switch locator LED and ID tag for maintenance convenience
Upgradable license for full L3 and MPLS applications








OpenFlow Switching that Stacks Above the Competition The DXS-3610 Layer 3 Stackable 10G/100G Managed OpenFlow Switches are compatible with SDN-enabled network architecture for deployment in high-performance datacenter, enterprise, and campus applications. Hot-swappable PSU and fan modules with load sharing capabilities significantly reduce network downtime and power consumption. Stackable up to 12 units and high port density makes the DXS-3610 the ideal choice for future-proofing your aggregation/core network.






High Availability The DXS-3610 Series boasts high-performance 10G Ethernet switching capacity of up to 2.16 Tbps with forwarding rates of up to 1607 Mpps. Hot-Swappable Redundancy The DXS-3610 Series also features a modular fan back-up design, providing n+1 redundancy for the system. The modular power design allows either AC or DC power sources for maximum deployment flexibility. With dual power modules, the power load is distributed, extending the lifetime of the modules.






Robust and Versatile Stacking Capability Stack up to 12 DXS-3610 switches with up to a total of 1200G (1.2T) stacking bandwidth. Perfect for small to medium-sized data centers in enterprise or campus applications using leaf-spine or top-of-rack (ToR) architecture.






Enhanced Manageability for Peace of Mind For more complex network infrastructures, D-View 7, a centralized management platform, can be installed for in-depth network management and maintenance to optimize network availability, reliability, security, and resilience.









Management Features Multicast support Yes Switch type Managed Switch layer L3

Performance Mean time between failures (MTBF) 94262 h Packet buffer memory 32 MB Physical stacking (units) 12 Virtual stacking (units) 32 Stackable Yes Noise level 79.4 dB

Ports & interfaces SFP+ module slots quantity 48 Basic switching RJ-45 Ethernet ports type None USB 2.0 ports quantity 1 Console port RJ-45 QSFP28 ports quantity 6

Data transmission Jumbo frames 9436 Packet buffer memory 32 MB MAC address table 294912 entries Switching capacity 2211.84 Gbit/s Forwarding rate 1607.04 Mpps

Power Power consumption (max) 320.8 W AC input voltage 110 - 240 V AC input frequency 50/60 Hz

Operational conditions Heat dissipation 1083 BTU/h Storage temperature (T-T) -40 - 70 °C Storage relative humidity (H-H) 0 - 95% Operating temperature (T-T) 0 - 45 °C Operating relative humidity (H-H) 0 - 95%

Operational conditions Width 441 mm Depth 487.4 mm Height 43.5 mm Weight 9.8 kg

54-Port 10G/40G Data Center Switch

Open network switch for data center and enterprise networks









Product features: 48 x 10G SFP+ ports
6 x 40G QSFP+ ports
Wire-speed, ultra-low latency switching
Supports Open Network Install Environment (ONIE) for zero-touch installation of network OS
SDN-enabled with OpenFlow 1.3 support
Dual AC/DC hot-swappable power supply modules for 1+1 redundancy and load sharing
Modular n+1 hot-swappable fan design






High Availability and Reliability The 5000 Series switches feature a modular fan and power supply design for a high availability architecture. The hot-swappable design means that fans and power supplies can be replaced without affecting switch operation. Load sharing enables both power supplies to evenly distribute load to increase reliability and lifetime. Meanwhile, 1+1 redundancy minimizes downtime in case of a single power supply failure.

Layer 3 Stackable 10G / 100G Managed Switches

DXS-3610-54T - 48-port 10GBase-T, 6-port 100G QSFP28 interfaces switch with Standard Image with 2 front-to-back AC PSUs and 5 front-to-back fan modules









Product features: High port density: 48 x 10 GbE Base-T ports, 6 x 100G QSFP+ ports
Stack up to 12 switches (up to 1.2 Tbps stacking bandwidth)
OpenFlow 1.3 compliance for SDN-enabled network compatibility
Modular PSU (1+1) and fan (N+1) with load sharing capabilities
Switch locator LED and ID tag for maintenance convenience
Upgradable license for full L3 and MPLS applications








OpenFlow Switching that Stacks Above the Competition The DXS-3610 Layer 3 Stackable 10G/100G Managed OpenFlow Switches are compatible with SDN-enabled network architecture for deployment in high-performance datacenter, enterprise, and campus applications. Hot-swappable PSU and fan modules with load sharing capabilities significantly reduce network downtime and power consumption. Stackable up to 12 units and high port density makes the DXS-3610 the ideal choice for future-proofing your aggregation/core network.






High Availability The DXS-3610 Series boasts high-performance 10G Ethernet switching capacity of up to 2.16 Tbps with forwarding rates of up to 1607 Mpps. Hot-Swappable Redundancy The DXS-3610 Series also features a modular fan back-up design, providing n+1 redundancy for the system. The modular power design allows either AC or DC power sources for maximum deployment flexibility. With dual power modules, the power load is distributed, extending the lifetime of the modules.






Hot-Swappable Redundancy The DXS-3610 Series also features a modular fan back-up design, providing n+1 redundancy for the system. The modular power design allows either AC or DC power sources for maximum deployment flexibility. With dual power modules, the power load is distributed, extending the lifetime of the modules.






Robust and Versatile Stacking Capability Stack up to 12 DXS-3610 switches with up to a total of 1200G (1.2T) stacking bandwidth. Perfect for small to medium-sized data centers in enterprise or campus applications using leaf-spine or top-of-rack (ToR) architecture.






Enhanced Manageability for Peace of Mind For more complex network infrastructures, D-View 7, a centralized management platform, can be installed for in-depth network management and maintenance to optimize network availability, reliability, security, and resilience.






Management Features Multicast support Yes Switch type Managed Switch layer L3

Performance Packet buffer memory 32 MB Physical stacking (units) 12 Virtual stacking (units) 32 Stackable Yes Noise level 76.6 dB

Ports & interfaces SFP+ module slots quantity 48 Basic switching RJ-45 Ethernet ports type 10G Ethernet (100/1000/10000) USB 2.0 ports quantity 1 Console port RJ-45 QSFP28 ports quantity 6

Data transmission Jumbo frames 9436 Packet buffer memory 32 MB MAC address table 294912 entries Switching capacity 2211.84 Gbit/s Forwarding rate 1607.04 Mpps

Power Power consumption (max) 330.2 W AC input voltage 100 - 240 V AC input frequency 50/60 Hz Power consumption (typical) 108.2 W Redundant power supply (RPS) support Yes

Operational conditions Heat dissipation 1126 BTU/h Storage temperature (T-T) -40 - 70 °C Storage relative humidity (H-H) 0 - 95% Operating temperature (T-T) 0 - 45 °C Operating relative humidity (H-H) 0 - 95%