Dell Networking Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
Moxa Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
Netgear Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
Mellanox Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
Linksys Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
Intel Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
Juniper Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
Palo Alto Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
Huawei Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
Ubiquiti Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
Watchguard Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
TP-Link Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
SonicWall Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
Qlogic Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
Zyxel Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
HP H3C Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
Cisco Meraki Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
Cisco Viptela Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
Cisco Systems Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
Brocade/Ruckus Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
Arista Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
Avaya Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
Dell Force10 Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
Dell EMC Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
HP Aruba Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
Alcatel Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
Fortinet Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
Extreme Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
D-Link Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
HP Procurve Compatible 10G SR (multimode) Transceiver
The 10G SR Multimode Transceiver is a very compact optical transceiver module for serial optical communication applications at 10Gb/s. It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
The 10G SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP+ compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Features:
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface.
Power Supply: +3.3V
Power consumption: <1W
Temperature Range: 0~70°C
RoHS compliant
Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-SX Ethernet 1xFibre Channel
Other Optical Links
The CE 407-10356 Dell Compatible SFP+ transceiver provides 10GBASE-SR connectivity over multimode fibre using an 850nm wavelength. It supports transmission distances of up to 300m and uses a duplex LC connector for optical connectivity. Digital Optical Monitoring (DOM) provides access to transceiver operating information, while the SFP+ form factor supports compatible Dell networking equipment.
Key Features of CE 407-10356 Dell Compatible SFP+
10GBASE-SR SFP+ transceiver
850nm operating wavelength
Up to 300m transmission over multimode fibre
Duplex LC connector
Digital Optical Monitoring (DOM) support
10Gbps data rate
Multimode fibre (MMF) support
VCSEL laser transmitter
IEEE 802.3ae compliant
10GBASE-SR Fibre Connectivity
This transceiver provides 10 Gigabit Ethernet connectivity using the 10GBASE-SR standard and an 850nm optical interface. It is suitable for compatible Dell networking equipment requiring a short-range SFP+ fibre connection.
300m Multimode Fibre Reach
The module supports transmission distances of up to 300m over multimode fibre. The maximum reach varies according to the fibre specification, with compatible-module documentation listing 300m operation over suitable OM4 fibre.
850nm Optical Interface
Operating at 850nm, the transceiver uses a VCSEL laser transmitter for multimode fibre communication. The duplex LC connector provides separate optical paths for transmitting and receiving data.
Digital Optical Monitoring
DOM support allows compatible networking equipment to access operating information from the transceiver. This can provide visibility into optical parameters and the condition of the fibre connection.
SFP+ Compatibility
The module uses the SFP+ form factor for 10 Gigabit Ethernet applications and follows SFP+ Multi-Source Agreement specifications. Compatible documentation also identifies IEEE 802.3ae and RoHS compliance.
The CE 10G-SFP-SR Myricom Compatible SFP+ transceiver provides 10 Gigabit Ethernet connectivity over multimode fibre using the 10GBase-SR standard. Operating at 850nm, it supports transmission distances of up to 300m and uses a Duplex LC connector. The SFP+ module supports Digital Optical Monitoring (DOM), allowing access to operating parameters, and is suitable for compatible Myricom networking equipment requiring a 10GBase-SR optical interface.
Key Features of CE Myricom Compatible SFP+ Transceiver
10GBase-SR connectivity at up to 10.3Gbps
850nm operating wavelength
Up to 300m reach over multimode fibre
SFP+ form factor
Duplex LC connector
VCSEL transmitter and PIN receiver
Digital Optical Monitoring (DOM)
Hot-pluggable installation
IEEE 802.3ae and SFF-8472 compliance
10GBase-SR Fibre Connectivity
This transceiver supports 10GBase-SR networking over multimode fibre at an 850nm wavelength. It provides up to 300m of reach, with compatible fibre grades supporting different maximum distances according to the fibre specification.
SFP+ Optical Interface
The compact SFP+ form factor uses a Duplex LC connector for connection to multimode fibre cabling. A VCSEL optical transmitter and PIN receiver provide the optical conversion required for 10 Gigabit Ethernet communication.
Digital Optical Monitoring
DOM support provides access to real-time operating information from the transceiver, helping compatible network equipment monitor optical and module operating conditions through the diagnostic interface.
Myricom Compatibility
This compatible module corresponds to the Myricom 10G-SFP-SR transceiver specification and is intended for compatible Myricom equipment requiring a 10GBase-SR SFP+ optical interface.
The CE FG-TRAN-SFP+SR Fortinet Compatible Transceiver provides 10GBASE-SR connectivity for compatible Fortinet networking equipment, using 850nm optical transmission over multimode fibre. It supports data rates of up to 10Gbps and a transmission distance of up to 300 metres, making it suitable for short-range fibre links between network switches, firewalls and other compatible equipment.
Key Features of CE Fortinet Compatible Transceiver
10GBASE-SR SFP+ optical transceiver
10Gbps Ethernet data rate
850nm wavelength
Up to 300m transmission distance
Multimode fibre (MMF) support
Duplex LC connector
Digital Optical Monitoring (DOM) support
10GBASE-SR Fibre Connectivity
The transceiver uses the 10GBASE-SR standard with an 850nm wavelength for high-speed communication across multimode fibre. It provides a reach of up to 300 metres, with Fortinet documentation also listing 400 metres when used over OM4 multimode fibre.
LC Duplex Interface
A duplex LC connector provides the fibre interface for transmitting and receiving optical signals. The SFP+ form factor allows the module to be installed into compatible SFP+ ports on supported Fortinet networking equipment.
Digital Optical Monitoring
DOM support provides access to operating information from the transceiver, allowing compatible equipment to monitor optical and module parameters during operation. The module also supports hot-plug installation according to Fortinet's transceiver specifications.
The CE FN-TRAN-SFP+SR Fortinet Compatible Transceiver provides 10GBASE-SR connectivity through an SFP+ interface for compatible Fortinet networking equipment. Operating at 850nm over multimode fibre, it supports transmission distances of up to 300 metres on OM3 fibre and up to 400 metres on OM4 fibre, with a duplex LC connector for fibre connectivity.
Key Features of CE Fortinet Compatible Transceiver
10GBASE-SR optical transceiver
SFP+ form factor
10Gbps Ethernet data rate
850nm wavelength
Multimode fibre support
Up to 300m transmission on OM3 fibre
Up to 400m transmission on OM4 fibre
Duplex LC connector
Digital Optical Monitoring support
Hot-pluggable installation
10GBASE-SR Fibre Connectivity
The transceiver uses the 10GBASE-SR standard for 10 Gigabit Ethernet connections over multimode fibre. Its 850nm wavelength supports short-range fibre links, with Fortinet specifying a maximum distance of 300 metres over OM3 and 400 metres over OM4 fibre.
SFP+ Interface
The SFP+ form factor allows the module to connect to compatible SFP+ ports on Fortinet networking equipment. A duplex LC connector provides separate optical paths for transmitting and receiving data.
The CE FTLX8571D3BCL Finisar Coherent Compatible Transceiver provides 10GBASE-SR connectivity through an SFP+ interface for compatible networking equipment. Operating at 850nm over multimode fibre, it supports data rates from 9.95Gb/s to 10.5Gb/s and transmission distances of up to 300 metres, with a duplex LC connector for fibre connectivity.
Key Features of CE FTLX8571D3BCL Finisar Coherent Compatible
10GBASE-SR/SW SFP+ transceiver
9.95Gb/s to 10.5Gb/s supported data rate
850nm wavelength
Up to 300m transmission distance
Multimode fibre support
Duplex LC connector
VCSEL laser transmitter
Built-in digital diagnostic functions
Hot-pluggable SFP+ form factor
10GBASE-SR Fibre Connectivity
The transceiver supports 10GBASE-SR/SW Ethernet connections over multimode fibre using an 850nm wavelength. It provides a maximum link length of 300 metres when used with 2000 MHz-km multimode fibre, making it suitable for short-range 10 Gigabit Ethernet connections.
SFP+ Interface
The SFP+ form factor provides a pluggable interface for compatible network equipment, while the duplex LC connector provides separate optical paths for transmitting and receiving data. The module is hot-pluggable for installation without powering down compatible equipment.
Digital Diagnostics
Built-in digital diagnostic functions provide monitoring data through a two-wire serial interface in accordance with SFF-8472. The transceiver uses an uncooled 850nm VCSEL laser and a limiting receiver for optical data transmission.
The CE FTLX8574D3BCV Finisar Coherent Compatible Transceiver provides dual-rate fibre connectivity for compatible SFP+ networking equipment, supporting both 1.25Gb/s 1000BASE-SX and 9.95 to 10.3Gb/s 10GBASE-SR/SW operation. Using an 850nm VCSEL transmitter and multimode fibre, it supports links up to 300 metres on OM3 fibre and up to 400 metres on OM4 fibre, with a duplex LC connector and built-in digital diagnostics.
Key Features of CE FTLX8574D3BCV Finisar Coherent Compatible
Dual-rate 1.25Gb/s and 9.95 to 10.3Gb/s operation
1000BASE-SX and 10GBASE-SR/SW support
850nm VCSEL transmitter
Multimode fibre connectivity
Up to 300m on OM3 fibre
Up to 400m on OM4 fibre
Duplex LC connector
SFP+ hot-pluggable form factor
Built-in digital diagnostic functions
3.3V single power supply
Power dissipation below 1W
Dual-Rate Fibre Connectivity
The transceiver supports selectable 1.25Gb/s and 9.95 to 10.3Gb/s bit rates, allowing compatible SFP+ equipment to operate with either 1000BASE-SX or 10GBASE-SR/SW connections. It is intended for 1G/10G SFP+ ports and 10G SFP+ ports rather than native 1G SFP ports.
Multimode Fibre Transmission
Operating at 850nm, the module uses an uncooled VCSEL laser for multimode fibre transmission. The specified reach is 300 metres over OM3 fibre and 400 metres over OM4 fibre, with shorter distances supported on OM1 and OM2 fibre.
Digital Diagnostics
Built-in digital diagnostic functions are available through a two-wire serial interface in accordance with SFF-8472. The SFP+ module also supports hot-plug installation and uses a duplex LC optical connector for transmit and receive paths.
The CE SFP-10G-SR-S Cisco Compatible Transceiver provides 10GBASE-SR connectivity through an SFP+ interface for compatible Cisco networking equipment. Operating at 850nm over multimode fibre, it supports 10Gbps Ethernet links up to 300 metres on OM3 fibre and up to 400 metres on OM4 fibre. The module uses a dual LC/PC connector and supports Digital Optical Monitoring for compatible equipment.
Key Features of CE SFP-10G-SR-S Cisco Compatible
10GBASE-SR S-Class SFP+ transceiver
10Gbps Ethernet connectivity
850nm wavelength
Multimode fibre (MMF) support
Up to 300m on OM3 fibre
Up to 400m on OM4 fibre
Dual LC/PC connector
Digital Optical Monitoring support
SFP+ hot-pluggable form factor
Compatible with supported Cisco networking equipment
10GBASE-SR Connectivity
The transceiver supports 10GBASE-SR Ethernet at 10Gbps using an 850nm wavelength over multimode fibre. Cisco specifies link lengths of up to 300 metres on OM3 fibre and 400 metres on OM4 fibre.
Duplex Fibre Interface
A dual LC/PC connector provides separate optical paths for transmitting and receiving data. Cisco specifies PC or UPC fibre patch-cord connections for the module and does not support APC patch cords.
The CE TL-SM5110-SR TP-Link Compatible Transceiver provides 10GBASE-SR connectivity over multimode fibre using an 850nm wavelength for 10Gbps Ethernet links. Supporting transmission distances of up to 300m over 50/125µm fibre, it features an SFP+ form factor, LC interface and Digital Diagnostic Monitoring for compatible network equipment.
Key Features of CE TL-SM5110-SR TP-Link Compatible Transceiver
10GBASE-SR SFP+ multimode transceiver
850nm operating wavelength
10Gbps data rate
Up to 300m over 50/125µm multimode fibre
Up to 33m over 62.5/125µm multimode fibre
LC duplex fibre interface
Digital Diagnostic Monitoring (DDM)
SFP+ MSA compatible
Hot-swappable
10GBASE-SR Fibre Connectivity
The transceiver supports 10Gbps Ethernet connections using 850nm multimode optics. It can provide links up to 300m with 50/125µm fibre, while 62.5/125µm fibre supports distances up to 33m.
SFP+ Interface
Using an SFP+ form factor with an LC interface, the module can be installed in compatible 10G SFP+ ports. Its 3.3V power supply and hot-swappable operation support straightforward module installation and replacement.
Digital Diagnostic Monitoring
DDM support provides monitoring of key transceiver operating parameters, while SFP+ MSA compatibility supports use with compatible SFP+ networking equipment. The module also supports the SFF-8472 standard.
The CE UACC-OM-MM-10G-D-2 Ubiquiti Compatible Transceiver provides 10Gbps multimode fibre connectivity using 850nm optical transmission and duplex LC UPC connectors. Supplied as a 2-pack, these SFP+ modules support 10Gbps connections. They are suitable for 10GBASE-SR network connections and support digital optical monitoring for checking transceiver operating parameters.
Key Features of CE Ubiquiti Compatible Transceiver
2-pack of 10G multimode SFP+ transceivers
10GBASE-SR connectivity
850nm transmit and receive wavelength
Up to 300m over OM3 multimode fibre
Up to 400m over OM4 multimode fibre
Duplex LC UPC connectors
Supports 1Gbps and 10Gbps data rates
Digital optical monitoring support
10G Multimode Fibre Connectivity
The transceivers use 850nm optical signalling to provide high-speed connectivity over multimode fibre. The modules support 10Gbps operation and can reach up to 300m using OM3 fibre or 400m using OM4 fibre.
Duplex LC Connectivity
Each SFP+ module uses a duplex LC UPC connector for separate transmit and receive paths over multimode fibre. The compact SFP+ form factor allows the modules to be installed in compatible SFP+ network interfaces.
Digital Optical Monitoring
Digital optical monitoring provides access to operating information from the transceiver when supported by the host equipment. The modules have a maximum power consumption of 0.8W and operate from 0°C to 70°C.
The CE UACC-OM-MM-10G-D-20 Ubiquiti Compatible 20-Pack SFP+ Transceiver provides 1Gbps and 10Gbps connectivity over multimode fibre using duplex LC UPC connectors. Each module operates at 850nm and supports distances of up to 300m over OM3 fibre or 400m over OM4 fibre.
Key Features of CE Ubiquiti Compatible SFP+ Transceiver
20-pack of SFP+ transceiver modules
Supports 1Gbps and 10Gbps data rates
850nm TX and RX wavelength
Multimode fibre support
Up to 300m on OM3 fibre
Up to 400m on OM4 fibre
Duplex LC UPC connectors
Compatible with SFP+ and SFP interfaces
Multimode Fibre Connectivity
The transceiver modules support multimode fibre connections using 850nm transmission and reception wavelengths, with distances of up to 300m over OM3 and 400m over OM4 fibre.
SFP+ Interface
Each module uses a duplex LC UPC connector and SFP+ form factor, with support for both 1Gbps and 10Gbps data rates and compatibility with SFP+ and SFP interfaces.
20-Pack Configuration
The UACC-OM-MM-10G-D-20 is supplied as a 20-pack, providing multiple optical modules for compatible networking equipment. Each module has a maximum power consumption of 0.8W and an ambient operating temperature range of 0°C to 70°C.
-medium1.png?)
