The CE JL563A HPE Aruba Compatible Transceiver provides a 10Gbps copper network connection through an RJ-45 interface in an SFP+ form factor. Supporting transmission distances of up to 30m over Cat6A cabling, it provides a practical option for connecting compatible network equipment using standard twisted-pair infrastructure.
Key Features of CE HPE Aruba Compatible 10G Base-T SFP+
10GBASE-T SFP+ copper transceiver
RJ-45 connector for copper Ethernet connections
Supports data rates up to 10Gbps
Transmission distance of up to 30m
Supports STP Cat6A cabling
Compatible with supported HPE Aruba networking equipment
10GBASE-T Copper Connectivity
The transceiver provides 10Gbps Ethernet connectivity through an RJ-45 copper interface, making it suitable for network equipment with compatible SFP+ ports.
SFP+ Form Factor
The SFP+ form factor allows the transceiver to be installed in compatible SFP+ ports on supported HPE Aruba networking equipment.
Extended Temperature Range
The transceiver supports an operating temperature range from 0°C to 85°C, as specified for the JL563A model.
Juniper Compatible 10G T (copper) Transceiver
The SFP-10G-T-C copper transceiver module is a high performance integrated duplex data link for bi-directional communication over copper cable. It is specifically designed for high speed communication links that require 10 Gigabit Ethernet over Cat 6a/7.
SFP+ 10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the l0Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. SFP+ l0GBASE-T uses the SFP's RX_LOS pin for link indication. If you pull up SFP's TX_DISABLE pin, PHY IC will be reset.
Features:
Support 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T
Hot-pluggable SFP footprint
Supports Links up to 30m using Cat 6a/7 Cable
SFF-8431 and SFF-8432 MSA Compliant
IEEE 802.3az Compliant
Low Power Consumption (2.5W MAX @ 30m)
Fast Retrain EMI Cancellation Algorithm
Low EMI Emissions
I2C 2-Wire Interface for Serial ID and PHY Register Access
Auto-negotiates with other 10GBase-T PHYs
Supports 100/1000Base-T using Cat 5e cable or better
MDI/MDIX Crossover
Multiple Loopback Modes for Testing and Troubleshooting
Built-in Cable Monitoring and Link
Cable Length Measurements
Robust Die Cast Housing
Bail Latch Style ejector mechanism
Unshielded and Shielded cable support
Intel Compatible 10G T (copper) Transceiver
The SFP-10G-T-C copper transceiver module is a high performance integrated duplex data link for bi-directional communication over copper cable. It is specifically designed for high speed communication links that require 10 Gigabit Ethernet over Cat 6a/7.
SFP+ 10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the l0Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. SFP+ l0GBASE-T uses the SFP's RX_LOS pin for link indication. If you pull up SFP's TX_DISABLE pin, PHY IC will be reset.
Features:
Support 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T
Hot-pluggable SFP footprint
Supports Links up to 30m using Cat 6a/7 Cable
SFF-8431 and SFF-8432 MSA Compliant
IEEE 802.3az Compliant
Low Power Consumption (2.5W MAX @ 30m)
Fast Retrain EMI Cancellation Algorithm
Low EMI Emissions
I2C 2-Wire Interface for Serial ID and PHY Register Access
Auto-negotiates with other 10GBase-T PHYs
Supports 100/1000Base-T using Cat 5e cable or better
MDI/MDIX Crossover
Multiple Loopback Modes for Testing and Troubleshooting
Built-in Cable Monitoring and Link
Cable Length Measurements
Robust Die Cast Housing
Bail Latch Style ejector mechanism
Unshielded and Shielded cable support
Netgear Compatible 10G T (copper) Transceiver
The SFP-10G-T-C copper transceiver module is a high performance integrated duplex data link for bi-directional communication over copper cable. It is specifically designed for high speed communication links that require 10 Gigabit Ethernet over Cat 6a/7.
SFP+ 10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the l0Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. SFP+ l0GBASE-T uses the SFP's RX_LOS pin for link indication. If you pull up SFP's TX_DISABLE pin, PHY IC will be reset.
Features:
Support 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T
Hot-pluggable SFP footprint
Supports Links up to 30m using Cat 6a/7 Cable
SFF-8431 and SFF-8432 MSA Compliant
IEEE 802.3az Compliant
Low Power Consumption (2.5W MAX @ 30m)
Fast Retrain EMI Cancellation Algorithm
Low EMI Emissions
I2C 2-Wire Interface for Serial ID and PHY Register Access
Auto-negotiates with other 10GBase-T PHYs
Supports 100/1000Base-T using Cat 5e cable or better
MDI/MDIX Crossover
Multiple Loopback Modes for Testing and Troubleshooting
Built-in Cable Monitoring and Link
Cable Length Measurements
Robust Die Cast Housing
Bail Latch Style ejector mechanism
Unshielded and Shielded cable support
Ubiquiti Compatible 10G T (copper) Transceiver
The SFP-10G-T-C copper transceiver module is a high performance integrated duplex data link for bi-directional communication over copper cable. It is specifically designed for high speed communication links that require 10 Gigabit Ethernet over Cat 6a/7.
SFP+ 10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the l0Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. SFP+ l0GBASE-T uses the SFP's RX_LOS pin for link indication. If you pull up SFP's TX_DISABLE pin, PHY IC will be reset.
Features:
Support 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T
Hot-pluggable SFP footprint
Supports Links up to 30m using Cat 6a/7 Cable
SFF-8431 and SFF-8432 MSA Compliant
IEEE 802.3az Compliant
Low Power Consumption (2.5W MAX @ 30m)
Fast Retrain EMI Cancellation Algorithm
Low EMI Emissions
I2C 2-Wire Interface for Serial ID and PHY Register Access
Auto-negotiates with other 10GBase-T PHYs
Supports 100/1000Base-T using Cat 5e cable or better
MDI/MDIX Crossover
Multiple Loopback Modes for Testing and Troubleshooting
Built-in Cable Monitoring and Link
Cable Length Measurements
Robust Die Cast Housing
Bail Latch Style ejector mechanism
Unshielded and Shielded cable support
Zyxel Compatible 10G T (copper) Transceiver
The SFP-10G-T-C copper transceiver module is a high performance integrated duplex data link for bi-directional communication over copper cable. It is specifically designed for high speed communication links that require 10 Gigabit Ethernet over Cat 6a/7.
SFP+ 10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the l0Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. SFP+ l0GBASE-T uses the SFP's RX_LOS pin for link indication. If you pull up SFP's TX_DISABLE pin, PHY IC will be reset.
Features:
Support 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T
Hot-pluggable SFP footprint
Supports Links up to 30m using Cat 6a/7 Cable
SFF-8431 and SFF-8432 MSA Compliant
IEEE 802.3az Compliant
Low Power Consumption (2.5W MAX @ 30m)
Fast Retrain EMI Cancellation Algorithm
Low EMI Emissions
I2C 2-Wire Interface for Serial ID and PHY Register Access
Auto-negotiates with other 10GBase-T PHYs
Supports 100/1000Base-T using Cat 5e cable or better
MDI/MDIX Crossover
Multiple Loopback Modes for Testing and Troubleshooting
Built-in Cable Monitoring and Link
Cable Length Measurements
Robust Die Cast Housing
Bail Latch Style ejector mechanism
Unshielded and Shielded cable support
HP H3C Compatible 10G T (copper) Transceiver
The SFP-10G-T-C copper transceiver module is a high performance integrated duplex data link for bi-directional communication over copper cable. It is specifically designed for high speed communication links that require 10 Gigabit Ethernet over Cat 6a/7.
SFP+ 10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the l0Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. SFP+ l0GBASE-T uses the SFP's RX_LOS pin for link indication. If you pull up SFP's TX_DISABLE pin, PHY IC will be reset.
Features:
Support 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T
Hot-pluggable SFP footprint
Supports Links up to 30m using Cat 6a/7 Cable
SFF-8431 and SFF-8432 MSA Compliant
IEEE 802.3az Compliant
Low Power Consumption (2.5W MAX @ 30m)
Fast Retrain EMI Cancellation Algorithm
Low EMI Emissions
I2C 2-Wire Interface for Serial ID and PHY Register Access
Auto-negotiates with other 10GBase-T PHYs
Supports 100/1000Base-T using Cat 5e cable or better
MDI/MDIX Crossover
Multiple Loopback Modes for Testing and Troubleshooting
Built-in Cable Monitoring and Link
Cable Length Measurements
Robust Die Cast Housing
Bail Latch Style ejector mechanism
Unshielded and Shielded cable support
Fortinet Compatible 10G T (copper) Transceiver
The SFP-10G-T-C copper transceiver module is a high performance integrated duplex data link for bi-directional communication over copper cable. It is specifically designed for high speed communication links that require 10 Gigabit Ethernet over Cat 6a/7.
SFP+ 10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the l0Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. SFP+ l0GBASE-T uses the SFP's RX_LOS pin for link indication. If you pull up SFP's TX_DISABLE pin, PHY IC will be reset.
Features:
Support 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T
Hot-pluggable SFP footprint
Supports Links up to 30m using Cat 6a/7 Cable
SFF-8431 and SFF-8432 MSA Compliant
IEEE 802.3az Compliant
Low Power Consumption (2.5W MAX @ 30m)
Fast Retrain EMI Cancellation Algorithm
Low EMI Emissions
I2C 2-Wire Interface for Serial ID and PHY Register Access
Auto-negotiates with other 10GBase-T PHYs
Supports 100/1000Base-T using Cat 5e cable or better
MDI/MDIX Crossover
Multiple Loopback Modes for Testing and Troubleshooting
Built-in Cable Monitoring and Link
Cable Length Measurements
Robust Die Cast Housing
Bail Latch Style ejector mechanism
Unshielded and Shielded cable support
Cisco Meraki Compatible 10G T (copper) Transceiver
The SFP-10G-T-C copper transceiver module is a high performance integrated duplex data link for bi-directional communication over copper cable. It is specifically designed for high speed communication links that require 10 Gigabit Ethernet over Cat 6a/7.
SFP+ 10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the l0Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. SFP+ l0GBASE-T uses the SFP's RX_LOS pin for link indication. If you pull up SFP's TX_DISABLE pin, PHY IC will be reset.
Features:
Support 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T
Hot-pluggable SFP footprint
Supports Links up to 30m using Cat 6a/7 Cable
SFF-8431 and SFF-8432 MSA Compliant
IEEE 802.3az Compliant
Low Power Consumption (2.5W MAX @ 30m)
Fast Retrain EMI Cancellation Algorithm
Low EMI Emissions
I2C 2-Wire Interface for Serial ID and PHY Register Access
Auto-negotiates with other 10GBase-T PHYs
Supports 100/1000Base-T using Cat 5e cable or better
MDI/MDIX Crossover
Multiple Loopback Modes for Testing and Troubleshooting
Built-in Cable Monitoring and Link
Cable Length Measurements
Robust Die Cast Housing
Bail Latch Style ejector mechanism
Unshielded and Shielded cable support
Cisco Systems Compatible 10G T (copper) Transceiver
The SFP-10G-T-C copper transceiver module is a high performance integrated duplex data link for bi-directional communication over copper cable. It is specifically designed for high speed communication links that require 10 Gigabit Ethernet over Cat 6a/7.
SFP+ 10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the l0Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. SFP+ l0GBASE-T uses the SFP's RX_LOS pin for link indication. If you pull up SFP's TX_DISABLE pin, PHY IC will be reset.
Features:
Support 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T
Hot-pluggable SFP footprint
Supports Links up to 30m using Cat 6a/7 Cable
SFF-8431 and SFF-8432 MSA Compliant
IEEE 802.3az Compliant
Low Power Consumption (2.5W MAX @ 30m)
Fast Retrain EMI Cancellation Algorithm
Low EMI Emissions
I2C 2-Wire Interface for Serial ID and PHY Register Access
Auto-negotiates with other 10GBase-T PHYs
Supports 100/1000Base-T using Cat 5e cable or better
MDI/MDIX Crossover
Multiple Loopback Modes for Testing and Troubleshooting
Built-in Cable Monitoring and Link
Cable Length Measurements
Robust Die Cast Housing
Bail Latch Style ejector mechanism
Unshielded and Shielded cable support
Cisco Viptela Compatible 10G T (copper) Transceiver
The SFP-10G-T-C copper transceiver module is a high performance integrated duplex data link for bi-directional communication over copper cable. It is specifically designed for high speed communication links that require 10 Gigabit Ethernet over Cat 6a/7.
SFP+ 10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the l0Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. SFP+ l0GBASE-T uses the SFP's RX_LOS pin for link indication. If you pull up SFP's TX_DISABLE pin, PHY IC will be reset.
Features:
Support 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T
Hot-pluggable SFP footprint
Supports Links up to 30m using Cat 6a/7 Cable
SFF-8431 and SFF-8432 MSA Compliant
IEEE 802.3az Compliant
Low Power Consumption (2.5W MAX @ 30m)
Fast Retrain EMI Cancellation Algorithm
Low EMI Emissions
I2C 2-Wire Interface for Serial ID and PHY Register Access
Auto-negotiates with other 10GBase-T PHYs
Supports 100/1000Base-T using Cat 5e cable or better
MDI/MDIX Crossover
Multiple Loopback Modes for Testing and Troubleshooting
Built-in Cable Monitoring and Link
Cable Length Measurements
Robust Die Cast Housing
Bail Latch Style ejector mechanism
Unshielded and Shielded cable support
Dell Networking Compatible 10G T (copper) Transceiver
The SFP-10G-T-C copper transceiver module is a high performance integrated duplex data link for bi-directional communication over copper cable. It is specifically designed for high speed communication links that require 10 Gigabit Ethernet over Cat 6a/7.
SFP+ 10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the l0Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. SFP+ l0GBASE-T uses the SFP's RX_LOS pin for link indication. If you pull up SFP's TX_DISABLE pin, PHY IC will be reset.
Features:
Support 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T
Hot-pluggable SFP footprint
Supports Links up to 30m using Cat 6a/7 Cable
SFF-8431 and SFF-8432 MSA Compliant
IEEE 802.3az Compliant
Low Power Consumption (2.5W MAX @ 30m)
Fast Retrain EMI Cancellation Algorithm
Low EMI Emissions
I2C 2-Wire Interface for Serial ID and PHY Register Access
Auto-negotiates with other 10GBase-T PHYs
Supports 100/1000Base-T using Cat 5e cable or better
MDI/MDIX Crossover
Multiple Loopback Modes for Testing and Troubleshooting
Built-in Cable Monitoring and Link
Cable Length Measurements
Robust Die Cast Housing
Bail Latch Style ejector mechanism
Unshielded and Shielded cable support
Extreme Compatible 10G T (copper) Transceiver
The SFP-10G-T-C copper transceiver module is a high performance integrated duplex data link for bi-directional communication over copper cable. It is specifically designed for high speed communication links that require 10 Gigabit Ethernet over Cat 6a/7.
SFP+ 10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the l0Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. SFP+ l0GBASE-T uses the SFP's RX_LOS pin for link indication. If you pull up SFP's TX_DISABLE pin, PHY IC will be reset.
Features:
Support 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T
Hot-pluggable SFP footprint
Supports Links up to 30m using Cat 6a/7 Cable
SFF-8431 and SFF-8432 MSA Compliant
IEEE 802.3az Compliant
Low Power Consumption (2.5W MAX @ 30m)
Fast Retrain EMI Cancellation Algorithm
Low EMI Emissions
I2C 2-Wire Interface for Serial ID and PHY Register Access
Auto-negotiates with other 10GBase-T PHYs
Supports 100/1000Base-T using Cat 5e cable or better
MDI/MDIX Crossover
Multiple Loopback Modes for Testing and Troubleshooting
Built-in Cable Monitoring and Link
Cable Length Measurements
Robust Die Cast Housing
Bail Latch Style ejector mechanism
Unshielded and Shielded cable support
Arista Compatible 10G T (copper) Transceiver
The SFP-10G-T-C copper transceiver module is a high performance integrated duplex data link for bi-directional communication over copper cable. It is specifically designed for high speed communication links that require 10 Gigabit Ethernet over Cat 6a/7.
SFP+ 10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the l0Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. SFP+ l0GBASE-T uses the SFP's RX_LOS pin for link indication. If you pull up SFP's TX_DISABLE pin, PHY IC will be reset.
Features:
Support 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T
Hot-pluggable SFP footprint
Supports Links up to 30m using Cat 6a/7 Cable
SFF-8431 and SFF-8432 MSA Compliant
IEEE 802.3az Compliant
Low Power Consumption (2.5W MAX @ 30m)
Fast Retrain EMI Cancellation Algorithm
Low EMI Emissions
I2C 2-Wire Interface for Serial ID and PHY Register Access
Auto-negotiates with other 10GBase-T PHYs
Supports 100/1000Base-T using Cat 5e cable or better
MDI/MDIX Crossover
Multiple Loopback Modes for Testing and Troubleshooting
Built-in Cable Monitoring and Link
Cable Length Measurements
Robust Die Cast Housing
Bail Latch Style ejector mechanism
Unshielded and Shielded cable support
The CE SFP-10G-T-X Cisco Compatible Transceiver provides multi-speed copper Ethernet connectivity through an SFP+ form factor with an RJ45 interface. It supports 100Mbps, 1Gbps and 10Gbps data rates, with 10Gbps connections reaching up to 30m over Cat6A or Cat7 cabling.
Key Features of CE Cisco Compatible Transceiver
SFP+ 10GBASE-T copper transceiver
Supports 100Mbps, 1Gbps and 10Gbps
RJ45 copper interface
Up to 30m at 10Gbps
Up to 100m at 100Mbps and 1Gbps
Cat6A or Cat7 cabling for 10Gbps
Cat5e or higher for 100Mbps and 1Gbps
Hot-swappable SFP+ form factor
Maximum power consumption of 2.5W at 10Gbps
Multi-Speed Ethernet Connectivity
The transceiver supports 100Mbps, 1Gbps and 10Gbps Ethernet connectivity, allowing compatible SFP+ ports to connect with copper-based network equipment. The exact speeds available can depend on the capabilities of the host platform.
10GBASE-T Copper Connection
For 10Gbps operation, the module supports Cat6A or Cat7 copper cabling over distances of up to 30m. This makes it suitable for connections within racks and between adjacent racks where copper cabling is preferred.
Hot-Swappable Form Factor
The compact SFP+ module is hot-swappable, allowing it to be inserted or replaced in a compatible Ethernet SFP+ port without powering down the host equipment.
The CE TL-SM5310-T TP-Link Compatible Transceiver provides multi-speed copper Ethernet connectivity through an SFP+ form factor with an RJ45 interface. It supports 100Mbps, 1Gbps, 2.5Gbps, 5Gbps and 10Gbps Ethernet operation, with 10Gbps connections reaching up to 30m over Cat6a or higher UTP cabling.
Key Features of CE TP-Link Compatible Transceiver
10GBASE-T RJ45 SFP+ transceiver
Supports 100Mbps, 1Gbps, 2.5Gbps, 5Gbps and 10Gbps
Up to 30m at 10Gbps
RJ45 copper interface
Cat6a or higher UTP cabling for 10Gbps
DDM for temperature and voltage monitoring
Hot-pluggable SFP+ form factor
10GBASE-T Transmission
10GBASE-T operation supports distances of up to 30m when using UTP Cat6a or higher cabling. Lower-speed 1000BASE-T, 2.5GBASE-T and 5GBASE-T connections can reach up to 100m with Cat5e or better cabling.
Digital Diagnostic Monitoring
Digital diagnostic monitoring provides temperature and voltage information, while the TX Disable function provides control over the transmitter.
SFP+ RJ45 Interface
The module uses a hot-pluggable SFP+ footprint and provides a 10G RJ45 port for copper Ethernet connectivity. Its metallic enclosure helps limit electromagnetic interference.
The CE FN-TRAN-SFP+GC Fortinet Compatible Transceiver provides 10Gbps copper Ethernet connectivity through an SFP+ form factor with an RJ45 interface. It supports 10GBASE-T operation over Cat6A or better copper cabling for distances up to 30m. The module uses a 10Gbps Ethernet data link rate, supports auto negotiation and link status monitoring,
Key Features of CE Fortinet Compatible Transceiver
10GBASE-T SFP+ copper transceiver
10Gbps Ethernet data link rate
RJ45 copper interface
Up to 30m transmission distance
Cat6A or better copper cabling
Hot-pluggable SFP+ form factor
Auto negotiation support
Link status monitoring
10GBASE-T Copper Connectivity
The transceiver provides 10Gbps Ethernet connectivity through an RJ45 copper interface and supports the 10GBASE-T protocol standard. It is specified for transmission distances of up to 30m when used with Cat6A or better cabling.
SFP+ RJ45 Interface
The SFP+ module provides an RJ45 copper connection for compatible network equipment with SFP+ ports. Fortinet identifies it as a 10GE copper SFP+ RJ45 transceiver for systems with SFP+ slots.
Hot-Pluggable Design
The module supports hot plugging, allowing it to be installed or removed from compatible equipment without requiring the host system to be powered down. It also provides serial ID PROM information for module identification.
Temperature Range
The transceiver has an operating temperature range of -5°C to 85°C and a maximum power dissipation of 2.5W.
The CE SFP-10G-T Cisco Compatible SFP+ Transceiver provides copper-based network connectivity through an RJ45 interface, supporting 100Mbps, 1Gbps and 10Gbps Ethernet links. It supports distances of up to 30m at 10Gbps using Cat6A or Cat7 cabling, while 100Mbps and 1Gbps connections can reach up to 100m with suitable copper cabling.
Key Features of CE SFP-10G-T Cisco Compatible SFP+ Transceiver
100Mbps, 1Gbps and 10Gbps data rates
RJ45 copper interface
Up to 30m at 10Gbps
Up to 100m at 100Mbps and 1Gbps
SFP+ form factor
Supports 10GBASE-T, 1000BASE-T and 100BASE-TX
Hot-swappable installation
Multi-Rate Copper Connectivity
This SFP+ transceiver supports 100Mbps, 1Gbps and 10Gbps Ethernet connections, allowing compatible network equipment to use a single RJ45 copper interface across multiple link speeds.
10Gbps Copper Reach
For 10Gbps connections, the module supports distances of up to 30 metres when used with Cat6A or Cat7 or better cabling. At 100Mbps and 1Gbps, supported copper cabling can provide connections of up to 100 metres.
RJ45 SFP+ Interface
The compact SFP+ form factor provides an RJ45 port for direct connection to copper Ethernet cabling, making it suitable for connecting SFP+ network ports with compatible 10GBASE-T, 1000BASE-T and 100BASE-TX equipment.
