Axis Wall Mounts

Pipe seal for AXIS T91A6, to protect from dust, water and bugs.

Designed for use with the following AXIS Cameras

AXIS M11 Series

AXIS T91G61 Wall Mount Grey

Protects against water intrusion



• Waterproof compartment for sensitive parts

• Pre-mounted Ethernet cable

• Quick and easy connection of power and data


AXIS T91G61 Wall Mount Grey is specially designed to accommodate sensitive parts inside the mount, such as midspans and media converters, and protect them against water intrusion. The wall mount has a pre-mounted Ethernet cable with IP66 RJ45 connector (with gasket).

AXIS T8353 Mount

Plastic mounting accessory for mounting the microphone on wall-, ceiling- or hard surfaces.

AXIS TS3001 Recorder Mount

AXIS TS3001 Recorder mount makes sure AXIS S3008 Recorder is in a fixed position either if it is mounted on walls, shelves, or under tables. Its design and shape allows the recorder to be mounted in two opposite directions.

Wall mount bracket for AXIS T8640 Ethernet over Coax adapter base or device unit.

It includes a clamp and a stand and it helps to achieve a precise leveling of Axis PIR Motion Detectors.

Mounting clamp
Max. height of the surface to clamp: 30 mm (1.2 in)
Material: Plastic
Colour: NCS S 1002-B

Mounting stand
Stand height, including base: 70 mm (2.7 in)
Diameter of the base: 69 mm (2.7 in)
Material: Plastic
Colour: NCS S 1002-B

AXIS T91B21 Stand, White

Flexible with discreet cable management



• Suitable for walls, ceilings, or flat surfaces

• Optimized for P-line and Q-line fixed box cameras

• ¼"-20 UNC screw thread

• Metal


AXIS T91B21 Stand White is a camera stand in white metal for indoor use. It can be mounted on walls, shelves, or hard ceilings






Installation tip: How to install AXIS P1365 Network Camera with the included AXIS T91B21 Stand for discreet cable management.

AXIS TM3001 Tilt Mount

For wall installations with panoramic view



• 180-degree view

• 25-degree down tilt

• Anti-loss screws included


AXIS TM3001 Tilt Mount is suitable for mounting AXIS M3067-P Network Camera or AXIS M3068-P Network Camera on a wall. The tilt mount enables a panorama view and lets you look all the way down near the wall under the camera.

AXIS T91B21 Stand Black

Flexible with discreet cable management



• Suitable for walls, ceilings, or flat surfaces

• Optimized for P-line and Q-line fixed box cameras

• Metal


AXIS T91B21 Stand Black is a camera stand in black metal for indoor use. It can be mounted on walls, shelves, or hard ceilings.





Installation tip: How to install an AXIS P13 Series camera on AXIS T91B21 Stand for discreet cable management

AXIS T91E61 Wall Mount

For Axis fixed dome pendant kits



• 1.5 NPS thread

• Flexible cable routing

• Flexible cable routing

• Aluminum


AXIS T91E61 Wall Mount is compatible with Axis fixed dome pendant kits. The cables can be routed through the back or externally via the cut-outs at the base of the wall mount.

AXIS T91E61 Wall Mount together with an Axis fixed dome network camera.

AXIS TM3101 Pendant Wall Mount

Clean, simple design for mini fixed domes



• Contemporary design, becomes one with the wall

• Concealed cabling and mounting screws

• Compartment for microphone and connectivity devices

• Mount on walls, counter tops, and ceilings

• Available in white and black


AXIS TM3101 Pendant Wall Mount allows a clean, pendant-style mounting of Axis mini fixed dome cameras. The concealed mounting makes it blend in with the wall. It’s compatible with a wide range of Axis products. The compartment allows for secure storage of connectivity devices, and even a microphone. This compact mount is helpful to position the camera exactly where you need it, such as for installations above shop fronts with Axis retail analytics, such as people counting and face recognition.

Blends right in The contemporary and elegant design benefits from concealed mounting screws and becomes one with the wall. Available in both black and white models, the casing can be easily re-painted in any color helping it to blend in discreetly and seamlessly with any indoor surroundings.


Spacious and secure AXIS TM3101 features an ingress-protected compartment designed specifically for secure storage of connectivity devices so they can be safety mounted at the same point. It’s easy to add whatever connectivity devices you need, such as support for audio using AXIS T6101 Audio and I/O Interface and AXIS Device Microphone A. Furthermore, with AXIS T8643 PoE+ over Coax Compact you can route pre-existing coax cabling saving you time and money. Plus, everything is protected, and the finished installation is aesthetically pleasing.






Designed for flexible installation Thanks to its flexible design, AXIS TM3101 can be installed in various directions without the need for additional pendant kits. For instance, it can be installed at entrances on walls pointing downwards for optimized people-counting or pointing sideways for enhanced facial recognition analytics. It can be mounted on junction boxes using optional accessory AXIS TP3701 J-Box & Pole Adapter. Plus, when challenged with delicate wall or ceiling surfaces that are not mounting-friendly, it’s possible to mount on hard ceilings and counter tops. This makes AXIS TM3101 ideal for surveillance at border controls and cash check-out counters. Furthermore, the mount features multiple cable entries making installation quick and easy.
Placement on top-down/wall downwards entrances for people counting



 



Placement on wall sidewards for better face identification at entrances

 



Placement on hard ceiling when you can’t drill on the walls (due to a wall glass), or when the shelves at the wall might block the view of the camera

 



Placement on desktop/counter tops (mounted on a table), for border control, cash check-out counters, interview rooms, receptions, etc.

 

AXIS TM3101 Pendant Wall Mount - Black

Clean, simple design for mini fixed domes



• Contemporary design, becomes one with the wall

• Concealed cabling and mounting screws

• Compartment for microphone and connectivity devices

• Mount on walls, counter tops, and ceilings

• Available in white and black


AXIS TM3101 Pendant Wall Mount allows a clean, pendant-style mounting of Axis mini fixed dome cameras. The concealed mounting makes it blend in with the wall. It’s compatible with a wide range of Axis products. The compartment allows for secure storage of connectivity devices, and even a microphone. This compact mount is helpful to position the camera exactly where you need it, such as for installations above shop fronts with Axis retail analytics, such as people counting and face recognition.

Blends right in The contemporary and elegant design benefits from concealed mounting screws and becomes one with the wall. Available in both black and white models, the casing can be easily re-painted in any color helping it to blend in discreetly and seamlessly with any indoor surroundings.


Spacious and secure AXIS TM3101 features an ingress-protected compartment designed specifically for secure storage of connectivity devices so they can be safety mounted at the same point. It’s easy to add whatever connectivity devices you need, such as support for audio using AXIS T6101 Audio and I/O Interface and AXIS Device Microphone A. Furthermore, with AXIS T8643 PoE+ over Coax Compact you can route pre-existing coax cabling saving you time and money. Plus, everything is protected, and the finished installation is aesthetically pleasing.






Designed for flexible installation Thanks to its flexible design, AXIS TM3101 can be installed in various directions without the need for additional pendant kits. For instance, it can be installed at entrances on walls pointing downwards for optimized people-counting or pointing sideways for enhanced facial recognition analytics. It can be mounted on junction boxes using optional accessory AXIS TP3701 J-Box & Pole Adapter. Plus, when challenged with delicate wall or ceiling surfaces that are not mounting-friendly, it’s possible to mount on hard ceilings and counter tops. This makes AXIS TM3101 ideal for surveillance at border controls and cash check-out counters. Furthermore, the mount features multiple cable entries making installation quick and easy.


Placement on top-down/wall downwards entrances for people counting

 



Placement on wall sidewards for better face identification at entrances

 



Placement on hard ceiling when you can’t drill on the walls (due to a wall glass), or when the shelves at the wall might block the view of the camera

 



Placement on desktop/counter tops (mounted on a table), for border control, cash check-out counters, interview rooms, receptions, etc.

 

For a single illuminator

AXIS T90 Single Bracket is designed to fit a single Axis illuminator.

AXIS TP3101 Pendant Wall Mount

Clean, simple design for fixed domes



• Contemporary design, becomes one with the wall

• Concealed cabling and mounting screws

• Compartment for microphone and connectivity devices

• Mount on walls, counter tops, and ceilings


AXIS TP3101 Pendant Wall Mount allows a clean, pendant-style mounting of AXIS M32-LVE and AXIS P32-V/-LV cameras without the need for additional pendant kits. The concealed mounting makes it blend in with the wall. The compartment allows for secure storage of connectivity devices, microphone, and even AXIS I/O Indication LED, This compact mount is helpful to position the camera exactly where you need it, such as for installations above shop fronts with Axis retail analytics, such as people counting and face recognition.

Design The contemporary and elegant design benefits from concealed mounting screws and becomes one with the wall. The casing can be easily re-painted in any color helping it to blend in discreetly and seamlessly with any indoor surroundings.


Spacious and secure AXIS TP3101 features an ingress-protected compartment designed specifically for secure storage of connectivity devices so they can be safety mounted at the same point. It’s easy to add whatever connectivity devices you need, such as support for audio using AXIS T6101 Audio + AXIS Device Microphone A (for AXIS M32-LVE), or just AXIS Device Microphone B (for AXIS P32-V/-LV). Plus, AXIS I/O Indication LED can be connected for retail environments where it can be used as a deterrent to let potential thieves know they are been watched. The LED is also ideal in healthcare environments to indicate when the camera is ON/OFF and let patients know when they are being monitored and to help assure their privacy remains intact. Furthermore, with AXIS T8643 PoE+ over Coax Compact you can route pre-existing coax cabling saving you time and money. And, everything is protected, and the finished installation is aesthetically pleasing.







Designed for flexible installation Thanks to its flexible design, AXIS TP3101 can be installed in various directions without the need for additional pendant kits. For instance, it can be installed at entrances on walls pointing downwards for optimized people-counting or pointing sideways for enhanced facial recognition analytics. It can be mounted on junction boxes using optional accessory AXIS TP3701 J-Box & Pole Adapter. Plus, when challenged with wall or ceiling surfaces that are not mounting-friendly, it’s possible to mount on hard ceilings and counter tops. This makes AXIS TP3101 ideal for surveillance at border controls and cash check-out counters. Furthermore, network, audio or I/O cables can be inserted from any direction making installation quick and easy.


Placement on top-down/wall downwards entrances for people counting

 



Placement on wall sidewards for better face identification at entrances

 



Placement on hard ceiling when you can’t drill on the walls (due to a wall glass), or when the shelves at the wall might block the view of the camera

 



Placement on desktop/counter tops (mounted on a table), for border control, cash check-out counters, interview rooms, receptions, etc.

 

Allows AXIS P1214 / AXIS P1214-E cameras to be mount horizontally or vertically, with tilt, for increased installation flexibility. Part number (all regions): 5503-991

Metal box to mount AXIS T97A10 to a wall.

For multiple illuminators

AXIS T90 Multi Bracket is designed to fit multiple Axis illuminators.

Compatible with AXIS PTZ dome and fixed dome network cameras. Also suitable for installation with conduit connections and cable channels. AXIS T91A6 Pipe Seal is included.

AXIS T91R61 Wall Mount

For tilting of Axis security radars



• Compatible with Axis security radars

• Tilt angle up to 90 degrees

• Protection against water and dust

• Easy to install




For near-distance coverage and vertical detection With AXIS T91R61 Wall Mount, installation of Axis security radar is flexible and easy. With up to 90 degrees tilt angle it lets you easily modify the detection angle providing improved near-distance coverage as well as enables vertical detection.




For easy installations hanks to its powder-coated aluminum enclosure with IK08-, and NEMA 250 Type 4X-rating, AXIS T91R61 is robust and weather-resistant. AXIS T91R61 includes one AXIS TQ1601-E Conduit Back Box for use of cable protection products and is compatible with ¾" conduits, M25 cable protection products and the Axis Conduit Interface (ACI) adapter range.

AXIS TI8602 Wall Mount

Robust mount for video intercoms



• Highly robust mount for walls

• Indoor and outdoor use

• Optional adapter available for conduit installation

• IK10 and IP69 rating


AXIS TI8602 Wall Mount is a wall mount for Axis network video intercoms. The mount is highly robust and provides protection against impact, water, dust, and corrosion.

Quick connection and room for more

Designed for fixed dome cameras, AXIS T91H61 Wall Mount accommodates and safely protects accessories inside the mount. You can connect the power and data quickly and easily thanks to the built-in RJ45 cable with connector.

Features

Room for devices, midspans and service loop
Protection against impacts, rain, dust and corrosion
Built-in RJ45 cable with connector
A versatile mount

The wall mount is designed to be impact- and weather-resistant (rain, dust and corrosion), and it is suitable for all environments both indoors and outdoors. You can mount it on poles and corners with the help of optional accessories.

AXIS T94J01A Wall Mount

Robust design with cable protection



• For indoor and outdoor use

• Impact resistant

• Robust and safe




Suitable for positioning cameras AXIS T94J01A Wall Mount is an aluminum mount suitable for Axis positioning cameras and positioning units. It is compatible with Axis ACI 3/4” conduit adapters, and offers six cable entries. Cables can be routed internally through the back or, by using a conduit connection, from each side or from the bottom. Use with optional accessories for mounting on poles or external corners.

AXIS T91G61 Wall Mount

Quick connection and room for more



• Room for connectivity devices, midspans and service loop

• Protection against impacts, water, dust and corrosion

• Pre-mounted Ethernet cable with IP66 RJ45 connector

• Re-use existing holes




Roomy compartment for protection and connectivity AXIS T91G61 Wall Mount is specially designed to accommodate and safely protect against water ingress inside the mount, such as midspans and media converters. The pre-mounted Ethernet cable with IP66 RJ45 connector (with gasket) helps quickly and easily connecting power and data to most of Axis PTZ network cameras.




Beautiful and yet strong Thanks to its impact-resistant and outdoor proven material, AXIS T91G61 Wall Mount suits all environments, both indoors and outdoors. AXIS T91G61 has the same hole pattern as the standard Axis PTZ wall mount and for retrofit, a pattern that matches Pelco's PTZ camera mount to enable an easy switch - no additional drilling is required. Moreover, it is possible to run the cables externally by using the conduit holes on the base of the wall mount.

AXIS T94J01A Wall Mount Grey

Robust design with cable protection



• Six cable entries

• Flexible cable routing

• Compatible with Axis ACI ¾? (M25) conduit adapters

• Aluminum


AXIS T94J01A Wall Mount Grey is a robust and impact-resistant wall mount suitable for AXIS Q6215-LE PTZ Network Camera. The wall mount is compatible with AXIS T94N01G Pole Mount and AXIS T91B57 Pole Mount Grey. Cables can be routed through the back or, by using a conduit connection, from each side or from the bottom.

AXIS T91F61 Wall Mount

Made in marine grade stainless steel



• Resistant to seawater and chemicals

• Suitable for all environments

• Marine grade stainless steel (SS 316L)

• Ideal for stainless steel fixed dome cameras


AXIS T91F61 Wall Mount is made of marine grade, electropolished and coated stainless steel (SS 316L). This makes the pole mount resistant to impact and corrosion.

Wall Mount ExCam XPT

For explosion-protected ExCam XPT Q6055



• Made of stainless steel 1.4404 (316L)

• Resistant to corrosion

• Sturdy and safe

• Compatible with ExCam XPT Q6055




Specifications The stainless steel wall mount is designed for ExCam XPT Q6055 Explosion-Protected PTZ Network Camera. Wall Mount ExCam XPT has a two-part design made of stainless steel. A protective hood for the bracket is also included to protect the cable glands according to 60079-14, and to prevent cables from exposure to direct splash water.

Wall Mount ExCam XF

For explosion-protected fixed network cameras



• Made of stainless steel EN 1.4404 (ASTM 316L)

• Resistant to corrosion

• Sturdy and safe

• Compatible with ExCam XF cameras


The wall mount is designed for ExCam XF explosion-protected fixed network cameras. The stainless steel mount offers the possibility to re-direct the camera to various tilting positions. It is ideal for onshore, offshore, marine, and heavy industrial applications.

Designed for Axis PTZ cameras, The AXIS TQ5001-E Wall-and-Pole Mount offers flexible installation and versatile connection with RJ45 or IDC connectors.

Robust mount for PTZ cameras

With this wall-and-pole mount, installers can choose between using an RJ45 or IDC (insulation-displacement contact) connector for the installation. It features a built-in cable with an ethernet IP66-rated RJ45 connector to facilitate installation and prevent water and dust from entering the camera.

Made from impact-resistant, outdoor-ready material, AXIS TQ5001-E is suited for both indoor and outdoor environments. Flipping the mounting bracket makes it possible to turn AXIS TQ5001-E from a wall mount to a pole mount (AXIS Steel Straps TX30 are required). The mount is also suitable for corner mounting with an optional accessory.

*For complete specifications see the documentation tab above