Axis Cables

Network cable with gasket, 5 m (16 ft)

For outdoor connections



• CAT5e STP

• 24 AWG


Network cable with gasket, 5 m (16 ft) is a shielded outdoor network cable with a pre-mounted rubber gasket and male RJ45 connectors.

Product Features

RJ12 connectors and micro USB included
Length 1 m (39 in)
Sold in packs of four


Contains AXIS F7301 is a black cable (use with compatible sensor units.)

AXIS Stereo-to-mono Adapter

AXIS Stereo-to-mono Adapter allows two microphones to connect to one microphone input port.

M12-RJ45 Cable

Resistant to shock and vibration



• UV- and sunlight-resistant

• Rolling stock ready

• CAT5e

• 0.5 m (1.6 ft)


M12-RJ45 Cable is an M12 D-Code (female) to RJ45 (male) Ethernet cable. The cable is tested operational for shock and vibration according to requirements for rolling stock and ground vehicle installations.

The cable is compatible with Axis network video products with female RJ45 Ethernet port IEEE 802.3af and 802.3at (up to 30 W).

AXIS Power Cable 24 V 7 m (23 ft)

For selected AXIS Q60 and AXIS Q61 Network Cameras



• Operating temperature down to -50°C (-58°F)

• 7 m (23 feet)


AXIS Power Cable 24V 7m (23ft) extends the operating temperature of Q6010-E and Q6100-E Network Cameras down to -50 °C (-58 °F) when it is installed in extremely cold environments.


The power cable requires a 24 V DC mains adapter (sold separately).




Let your Coax cables do double-duty AXIS T8640 PoE+ over Coax Adapter Kit lets you reuse hard-to-replace or long-range Coax cabling when you replace your analog cameras with Axis network cameras. And you can integrate Power over Ethernet over Coax for efficient power management. Range distances depend on the power required and the type of cable quality. With AXIS T8640 you can add local power to the device unit enabling higher power cameras to be used.


Typical set-up:

 

AXIS Multicable B I/O Audio Power, 2.5 m

For connecting audio and I/O



• 3.5 mm audio in and out

• Length: 2.5 m (8.2 ft)

• Includes 4-pin I/O connector


Multi-connector cable providing AC/DC power, audio in/out and I/O connectivity for the camera.

AXIS Patch Cable A 200 mm, 6 pcs

Set of patch cables for connection between power supply and AXIS T8646 PoE+ over Coax Blade

Product Features

3.5 mm audio in and out
Length: 1 m (3.28 ft)
Includes 4-pin I/O connector

Product Features

3.5 mm audio in and out
Length: 5 m (16.4 ft)
Includes 4-pin I/O connector

Product Features Push-pull
Outdoor-ready camera connector
Connectors are included

AXIS Camera Heater Power Supply

Extra power to AXIS Q6010-E or AXIS Q6100-E Camera



• Complete power supply kit

• Extends operating temperature of camera

• Requirement for AXIS Q6100-E when used with AXIS Q6315-LE PTZ Camera


AXIS Camera Heater Power Supply provides extra power to AXIS Q6010-E Network Camera or AXIS Q6100-E Network Camera. The extra power extends the operating temperature of the camera down to -50 °C (-58 °F). AXIS Camera Heater Power Supply is required for AXIS Q6100-E Network Camera when used together with AXIS Q6315-LE PTZ Network Camera (regardless of operating temperature).


The kit includes AXIS Power Cable 24V 7 m (23 ft), AXIS Connector-A 2-pin, a 75 W power supply and a power cord connector.


Typical set-up:

 




Input voltage 100Vac to 240Vac Input current ≤ 1A Output voltage 24V Output current 3.125A max Output power ≤ 75W Operating temperature 0°C to 40°C Operating humidity 20% - 80% Dimensions (length x width x height) 140.1 x 65.1 x 25.4 mm

Product Features RJ12 connectors included
AXIS RJ12 Plug Shielded is included
Length 15 m (49 ft)
Sold in packs of four
Contains AXIS F7315 is a white cable suitable for installations where the cable is visible. It can be shortened to the preferrable length using an RJ12 connector.

Product Features Push-pull
Outdoor-ready camera connector
Connectors are included

Overview Outdoor RJ45 cable is a CAT6a Ethernet cable with IP66-rated male push pull connector. It's available in lengths of 5 m and 15 m.

Product Features

IP66 push and pull connector
CAT6a

AXIS Cable 24 V DC/24-240 V AC 22 m

Tailor-made for Axis positioning cameras



• For outdoor use

• UL20626 up to 90 °C (194 °F)

• PVC- and halogen-free


AXIS Cable 24 V DC/24-240 V AC 22 m is a 22 m (72 ft) long heavy-duty power cable. It is designed for outdoor use with Axis positioning cameras and positioning units. The cable is made of TPE insulation and copper wire, and is PVC-free and halogen-free. It has 3-wire, 12AWG, and a jacket diameter of 10 mm (0.4 in).


The power source can be either 24 V DC or 24–240 V AC.

AXIS T8642 PoE+ over Coax Device

Single-channel device unit with DC input



• Reuse Coax cables and benefit from PoE

• Suitable for long-range Coax installations

• Low upfront investment


AXIS PoE+ Over Coax lets you reuse hard-to-replace or long-range Coax cabling when you replace your analog cameras with Axis network cameras. And you can integrate Power over Ethernet over Coax for efficient power management. Range distances depend on the power required and the type of cable quality. With AXIS T8642 you can add local power to the device unit enabling higher power cameras to be used.


The device unit is part of AXIS T8640 PoE+ over Coax Adapter Kit and AXIS T8646 PoE+ Over Coax Blade Kit. For more information and set-up illustrations, see the product pages for the kits.

AXIS T8641 PoE+ over Coax Base

Single-channel base unit with DC input



• Reuse Coax cables and benefit from PoE

• Perfect for smaller installations

• Low upfront investment


AXIS PoE+ Over Coax lets you reuse hard-to-replace or long-range Coax cabling when you replace your analog cameras with Axis network cameras. And you can integrate Power over Ethernet over Coax for efficient power management. Range distances depend on the power required and the type of cable quality.


With AXIS PoE+ Over Coax, you can replace your analog cameras with network video cameras at your own pace – one camera or several at a time. Because it’s a single-channel solution, there’s no need to invest in chassis or to replace more than one camera at a time.


The base unit is part of AXIS T8640 PoE+ over Coax Adapter Kit and AXIS T8645 PoE+ over Coax Compact Kit. For more information and set-up illustrations, see the product pages for the kits.

AXIS T8643 PoE+ over Coax Compact

Single-channel device unit



• Reuse Coax cables and benefit from PoE

• Extra compact and easy to integrate

• Perfect for smaller installations

• Fits easily into back boxes and housings

• Low upfront investment


AXIS PoE+ Over Coax lets you reuse hard-to-replace or long-range Coax cabling when you replace your analog cameras with Axis network cameras. And you can integrate Power over Ethernet over Coax for efficient power management. Range distances depend on the power required and the type of cable quality.


The device unit is part of AXIS T8645 PoE+ over Coax Compact Kit and AXIS T8648 PoE+ over Coax Blade Compact Kit. For more information and set-up illustrations, see the product pages for the kits.

AXIS T8640 PoE+ over Coax Adapter Kit

Cost-efficient migration to network video for smaller installations



• Reuse Coax cables and benefit from Power over Ethernet (PoE)

• Suitable for long-range coax installations

• Low upfront investment


If you want to move to IP and it is time to replace your analog video cameras, AXIS T8640 PoE+ over Coax Adapter Kit is an efficient way to make the switch – and keep your Coax cabling. AXIS T8640 PoE+ over Coax Adapter Kit includes two adapters, one for connecting a network camera to a Coax cable and one for connecting it to the network (see Typical set-up).




Let your Coax cables do double-duty AXIS T8640 PoE+ over Coax Adapter Kit lets you reuse hard-to-replace or long-range Coax cabling when you replace your analog cameras with Axis network cameras. And you can integrate Power over Ethernet over Coax for efficient power management. Range distances depend on the power required and the type of cable quality. With AXIS T8640 you can add local power to the device unit enabling higher power cameras to be used.




Typical set-up:













 






The right choice for smaller installations With AXIS T8640 PoE+ over Coax Adapter Kit, you can replace your analog cameras with network video cameras at your own pace – one camera or several at a time. Because it is a single-channel solution, there is no need to invest in chassis or to replace more than one camera at a time. Simply add adapter kits as you need them.

Overview X-Tail Cable is explosion-protected and water-resistant (IP66, IP67 and IP68). The cable is made of helically wound-galvanized steel with smooth black TPE-V coating, and the compound filled glands are made of nickel-plated brass.

The cable is ATEX-, IECEx- and EAC-approved for the installation of explosion-protected fixed and PTZ network cameras.

The black conduit is oil-resistant and designed to accommodate a CAT5 cable with five AWG22 wires of which three are dedicated for power (24 V AC) and the other two are for connecting XWP10 Pressurized Washer Tank via I/O port.

Product Features

ATEX-, IECEx- and EAC-certified glands
Oil-resistant
For network and power connection
Available in different lengths (3m, 5m, 7m, 10m, 15m, 20m)

Overview This data and power cable is specially designed for hazardous areas in accordance with EN 60079-14 for use in arctic temperatures (-60 °C/140 °F). The cable is ideal for wiring explosion-protected network cameras in AXIS ExCam Series. The cable meets the transmission characteristics for Category 6 of IEC 61156-5 Edition 2. It provides resistance against mechanical stress, oils as well as greases. Moreover, it is halogen free.

SKDP03-T is a high-speed cable for Industrial Ethernet for fixed installations in dry, wet, or damp rooms.



Product Features

1x Ex d M20x1.5 cable gland - to connect to Ex Connection Rail PoE PS24 (if required)
1x Cat 6 RJ45 connector

Product Features This armored data and power cable is specially designed for hazardous areas in accordance with EN 60079-14 for use in arctic temperatures (-60 °C/140 °F). The cable is ideal for wiring explosion-protected network cameras in AXIS ExCam Series.

ASKDP03-T is a high-speed cable for Industrial Ethernet for fixed installations in dry, wet, or damp rooms. The cable meets the transmission characteristics for Category 6 of IEC 61156-5 Edition 2. It is halogen-free and resistant to mechanical stress, oils, and greases.

Contains

1x Ex e M20x1.5 cable gland - to connect to EXTB-3 Junction Box ExCam
1x Ex d M20x1.5 cable gland - to connect to Ex Connection Rail PoE PS24 (if required)
1x Cat 6 RJ45 connector

Product Features This armored data and power cable is specially designed for hazardous areas in accordance with EN 60079-14 for use in arctic temperatures (-60 °C/140 °F). The cable is ideal for wiring explosion-protected network cameras in AXIS ExCam Series.

ASKDP03-T is a high-speed cable for Industrial Ethernet for fixed installations in dry, wet, or damp rooms. The cable meets the transmission characteristics for Category 6 of IEC 61156-5 Edition 2. It is halogen-free and resistant to mechanical stress, oils, and greases.

Contains

1x Ex e M20x1.5 cable gland - to connect to EXTB-3 Junction Box ExCam
1x Ex d M20x1.5 cable gland - to connect to Ex Connection Rail PoE PS24 (if required)
1x Cat 6 RJ45 connector

Overview This data and power cable is specially designed for hazardous areas in accordance with EN 60079-14 for use in arctic temperatures (-60 °C/140 °F). The cable is ideal for wiring explosion-protected network cameras in AXIS ExCam Series. The cable meets the transmission characteristics for Category 6 of IEC 61156-5 Edition 2. It provides resistance against mechanical stress, oils as well as greases. Moreover, it is halogen free.

SKDP03-T is a high-speed cable for Industrial Ethernet for fixed installations in dry, wet, or damp rooms.



Product Features

1x Ex d M20x1.5 cable gland - to connect to Ex Connection Rail PoE PS24 (if required)
1x Cat 6 RJ45 connector

Product Features This armored data and power cable is specially designed for hazardous areas in accordance with EN 60079-14 for use in arctic temperatures (-60 °C/140 °F). The cable is ideal for wiring explosion-protected network cameras in AXIS ExCam Series.

ASKDP03-T is a high-speed cable for Industrial Ethernet for fixed installations in dry, wet, or damp rooms. The cable meets the transmission characteristics for Category 6 of IEC 61156-5 Edition 2. It is halogen-free and resistant to mechanical stress, oils, and greases.

Contains

1x Ex e M20x1.5 cable gland - to connect to EXTB-3 Junction Box ExCam
1x Ex d M20x1.5 cable gland - to connect to Ex Connection Rail PoE PS24 (if required)
1x Cat 6 RJ45 connector