Axis Connectors

Axis 5700-301 SPR P3343/-V Screw Kit

Screw kit including mounting screws, plugs and I/O connector.

AXIS Adapter RJ45 Male To Male

Adapter for connecting AXIS Q6000-E to PTZ camera.Adapter for connecting AXIS Q6000-E to PTZ camera.

AXIS Connector A 4-pin 2.5 Straight, 10 pcs

I/O connector for Axis products



• Pitch: 2.5 mm

• 4 pole terminal block

• Sold in packs of 10


AXIS Connector A 4-pin 2.5 Straight is a male connector for limited and full I/O port.

AXIS Connector A 2-pin 2.5 Straight, 10 pcs

For various Axis products



• Pitch: 2.50 mm

• 2 pole terminal block

• Sold in packs of 10


AXIS Connector A 2-pin 2.5 Straight is a male connector for DC power input.

AXIS Connector A 2-pin 3.81 Straight, 10 pcs

For various Axis products



• Pitch: 3.81 mm

• 2 pole terminal block

• Sold in packs of 10


AXIS Connector A 2-pin 3.81 Straight is a male connector for DC power input.

AXIS Connector A 2-pin 5.08 Straight, 10 pcs

For selected Axis products



• Pitch: 5.08 mm

• 2 pole terminal block

• Sold in packs of 10


AXIS Connector A 2-pin 5.08 Straight is a male connector for DC power input.

AXIS Connector A 4-pin 3.81 Straight, 10 pcs

AXIS male connector for low voltage power. Pitch: 3.81 mm. 4pos terminal block. 10-pack

AXIS Connector A 3-pin 3.81 Straight, 10 pcs

For selected Axis products



• Pitch: 3.81 mm

• 3-pole terminal block

• Sold in packs of 10


AXIS Connector A 3-pin 3.81 Straight is a male connector for AC or DC power input.

AXIS RJ12 Plug Shielded

For shortening Axis sensor unit cables



• RJ12 shielded

• Sold in packs of 10


Shielded RJ12 connectors are used to shorten Axis sensor unit cables. A shielded connector is required to get a reliable data link between the sensor unit and the main unit.

You need a crimping tool (sold separately) for the installation.

AXIS 10-pin Push-Pull System Connector

Easy to assemble



• Easy to install

• Operating temperature: -40–70 °C

• IP65-rated


AXIS 10-pin Push-Pull System Connector provides I/O connectivity, audio in/out, and AC/DC power for cameras.

AXIS Connector A 4-pin 3.81 Straight IN/OUT, 10 pcs

Connecting audio devices to your camera



• Pitch: 3.81 mm

• 2+2 pole terminal block

• Sold in packs of 10


AXIS Connector A 4-pin 3.81 Straight IN/OUT is a male connector for audio.

RJ45 connector push pull plug

Easy to assemble



• Compatible with Axis PTZ cameras

• IP66-rated

• Operating temperature: -40–70 °C


RJ45 connector push pull plug is a network connector that seals the port in your camera. This prevents water and moisture from getting into the camera.




Let your Coax cables do double-duty AXIS T8640 PoE+ over Coax Adapter Kit lets you reuse hard-to-replace or long-range Coax cabling when you replace your analog cameras with Axis network cameras. And you can integrate Power over Ethernet over Coax for efficient power management. Range distances depend on the power required and the type of cable quality. With AXIS T8640 you can add local power to the device unit enabling higher power cameras to be used.




Installation tip:

AXIS Connector A 6-pin 2.5 Straight, 10 pcs

Extended I/O connector for Axis products



• Pitch: 2.5 mm

• 6 pole terminal block

• Sold in packs of 10


AXIS Connector A 6-pin 2.5 Straight is a male connector for extended I/O port.

Male M12 4p Connector, 10 pcs

For a more robust installation



• IP67-rated

• D-coded M12 connector

• Sold in packs of 10


Male M12 4p Connector is robust and IP67-rated. It is field-installable with screw-in contacts.


The connector is only compatible with AXIS P39 M12 models.

RJ45 Field Connector

For quick and easy cable termination



• Small form factor

• Easy to assemble

• For CAT6a (AWG 26-22)

• MPTL compliant

• Suitable for PoE


RJ45 Field Connector is easy to assemble and thanks to its compact size, it’s ideal for terminating CAT6a cables directly in a wide range of Axis network devices. The connector has an IP20-rating, and is compliant with the latest standard ANSI/TIA-568.2-D, which allows MPTL-installations (modular plug terminated link). It’s suitable for IEEE 802.3af, 802.3at, 802.3bt and Axis High PoE solutions. The connector is sold in packages of 10.