Zonit zLock Dual Locking Cables

The C19 to C20 locking power cable that eliminates accidental and vibration disconnects of IT equipment.

The reliability of physical power distribution in data centres depends to a large degree on the how well the power cords have been secured. When maintenance or configuration work is being performed, the cords connecting active IT hardware and the power source or PDU (Power Distribution Unit) can often be accidentally dislodged or even completely disconnected. This can lead to system disruptions or even total failures of productive hardware. What is particularly aggravating is that fixing these kinds of disruptions is time-consuming and, depending on how long it takes, can be very expensive but most aggravating of all is that these problems and risks could have been prevented in the first place if a power cord with integrated locking mechanism had been used from the outset.

The power cords with integrated locking mechanism are available for all C19 or C20 plugs and for special country configurations. The zLock Dual Sided IEC Locking Cable is the first truly universal C19 to C20 locking power cable that is 100% compatible with existing plugs and receptacles! The dual locking cables simply replace existing power cables and eliminate any accidental and vibration disconnects. They do not require a special mating plug or receptacle in order to have a secure connection.

The power cables and all connected IT devices are well protected against unintentional mechanical disconnections and the resulting power supply disruptions which lead to downtime and possible hardware damage. The zLock Dual Sided IEC Locking Cable can be released by simply pulling the red sliding tabs of the C19 connector or opening the twist lock on the C20 side. Simply replace your existing power cable with the zLock Dual Sided IEC Locking Cable and enjoy your increased uptime.

The highlights of the zLock Dual Sided IEC Locking Power Cable
Unique power cable that locks both ends
Plug and play replacement for existing power cables of IT devices
Requires no mating plug or receptacle on the other side of the connection
Truly universally compatible
Prevents power cables from being dislodged
Protects hardware against power supply interruptions and related damages
Eliminates accidental and vibration disconnects
Increases the reliability of power distribution in any data centre or IT environment
Mechanism locks automatically when connected to the power supply inlet
Unlock by simply pulling the red sliding tabs (C19) or opening the twist lock (C20)
UL Listed (UL 817) and CE compliant (IEC 60320)
Cable lengths: 0.5m, 1.0m, 1.5m, 2.0m or 2.5m
Other lengths and colours available upon request
Black, White and Red available as a special order of 250 units per length in 3m, 3.5m, 4.0m, 4.5m & 5m lengths.

The C13 to C14 locking power cable that eliminates accidental and vibration disconnects of IT equipment

The reliability of physical power distribution in data centres depends to a large degree on the how well the power cords have been secured. When maintenance or configuration work is being performed, the cords connecting active IT hardware and the power source or PDU (Power Distribution Unit) can often be accidentally dislodged or even completely disconnected. This can lead to system disruptions or even total failures of productive hardware. What is particularly aggravating is that fixing these kinds of disruptions is time-consuming and, depending on how long it takes, can be very expensive but most aggravating of all is that these problems and risks could have been prevented in the first place if a power cord with integrated locking mechanism had been used from the outset. The power cords with integrated locking mechanism are available for all C13 or C19 plugs and for special country configurations.

The zLock Dual Sided IEC Locking Cable is the first truly universal C13 to C14 locking power cable that is 100% compatible with existing plugs and receptacles! The dual locking cables simply replace existing power cables and eliminate any accidental and vibration disconnects. They do not require a special mating plug or receptacle in order to have a secure connection. The power cables and all connected IT devices are well protected against unintentional mechanical disconnections and the resulting power supply disruptions which lead to downtime and possible hardware damage. The zLock Dual Sided IEC Locking Cable can be released by simply pulling the red sliding tabs of the C13 connector or opening the twist lock on the C14 side. Simply replace your existing power cable with the zLock Dual Sided IEC Locking Cable and enjoy your increased uptime.

The highlights of the zLock Dual Sided IEC Locking Power Cable
Unique power cable that locks both ends
Plug and play replacement for existing power cables of IT devices
Requires no mating plug or receptacle on the other side of the connection
Truly universally compatible
Prevents power cables from being dislodged
Protects hardware against power supply interruptions and related damages
Eliminates accidential and vibration disconnects
Increases the reliability of power distribution in any data centre or IT environment
Mechanism locks automatically when connected to the power supply inlet
Unlock by simply pulling the red sliding tabs (C13) or opening the twist lock (C14)
UL Listed (UL 817) and CE compliant (IEC 60320)
Cable lengths: 0.5m, 1.0m, 1.5m, 2.0m or 2.5m
Other lengths and colours available upon request 
Black, White and Red available as a special order of 250 units per length in 3m, 3.5m, 4.0m, 4.5m & 5m lengths. All lengths available as a special order or 250 per length and colour in Blue, Green, Grey and Orange.

Image showing the internal workings on the C13 Plug