IEC C19 - UK Cables

You can connect to a switch or blade server with the Eaton P052-2P5M-UK, a C20 inlet to a PDU or UPS with BS 1363 outlets.

UK Power Cord Connects Data Center Equipment to Reliable AC Power

This VDE-compliant power cable connects a switch, router, blade server or other device with a C20 inlet to a PDU, UPS system or surge protector with BS 1363 outlets. It can also extend an existing power connection up to 2.5 meters (8.2 feet). The P052-2P5M-UK features a BS 1363 end for connecting to an AC power source and an IEC-320-C19 end for connecting to a network device in a data center or other IT application.

H05VV-F Jacket Is Fully VDE-Compatible for European Applications

The 0.75mm2 enhanced PVC jacket complies with VDE, CE and UKCA standards for data centers, racks, workstations and other IT applications in Europe.

Features

Recommended for powering switches, blade servers and other network devices

2.5-meter length allows flexibility in placing devices in relationship to AC outlet

Ideal replacement for a worn-out or missing power cord

VDE-compliant H05VV-F jacket allows use in European IT applications

Overview The Lindy UK to C5 Cables are ideal replacements for missing or damaged UPS power cables. The C19 connector is used on most UPS units to cope with the additional power requirements.

Product Details UK Mains Plug to IEC C19


13Amp fuse fitted


100% electrical and mechanical inspection


Fully moulded and VDE approved


10 year warranty

 Features:

Plug: UK BS1363
Equipment End: IEC C19
Cable Size: 3 x 1.50mm
Cable Type: H05VV-F 300/500v
Lengths Available: 0.5m, 1m, 2.5m,
Colour: Black
Fully Moulded and Fused
Colour: Black and Hanked
16amp Rated Cables 

Power Cord, Locking C19 to BS1363A (UK), 3.0m

Free up space and secure power cords between rack-mount PDUs and attached IT equipment with this exclusive easy-to-use cord retention method. While these cords will fit into any standard IEC receptacle or power inlet; the "locking" feature is enabled only when used with APC AP8000 series Rack PDUs or IT equipment with built-in locking receptacles. These locking connectors reduce the probability of accidentally disconnecting cords and dropping loads.

Key Features

Maximum Total Current Draw 13 Maximum Input Current 13A Maximum Line Current 13A Cord Length 3.0 Meters

Power Cord, C19 to CEE/7 Schuko, 2.5m

Wide selection of Rack PDU power cords for a variety of IT equipment.

Key Features

Maximum Total Current Draw 16 Overload Protection No Input frequency 50/60 Hz Acceptable Input Voltage 90 - 250VAC Maximum Input Current 16A Maximum Line Current 16A Cord Length 2.5 Meters

Power Cord, Locking C19 to CEE/7 Schuko, 3.0m

Free up space and secure power cords between rack-mount PDUs and attached IT equipment with this exclusive easy-to-use cord retention method. While these cords will fit into any standard IEC receptacle or power inlet; the "locking" feature is enabled only when used with APC AP8000 series Rack PDUs or IT equipment with built-in locking receptacles. These locking connectors reduce the probability of accidentally disconnecting cords and dropping loads.

Key Features

Maximum Total Current Draw 16 Nominal Output Voltage 240V Maximum Input Current 16A Maximum Line Current 16A Cord Length 3.0 Meters

Power Cord, C19 to BS1363A (UK), 2.4m

Wide selection of Rack PDU power cords for a variety of IT equipment.