Comms Express offer an extensive range of IEC C13-C14 male to female extension cables in a wide range of lengths in Black, Red, Blue, Yellow, Green and White
Features:
IEC Male (C14) to IEC Female (C13) power cord
H05VV-F 0.75mm to 1.0mm 3 core cable
0.5m to 5m - 6amp Cable & 10amp Plug, 10m - 10 amp Cable & Plug
Colour: Black, Blue, Red, Yellow, Green and White
Multiple lengths available including 0.5m, 1m, 2m, 3m, 5m & 10m
Length: | |
Colour: |
The C13 to C14 locking power cable that eliminates accidental and vibration disconnects of IT equipment
The reliability of physical power distribution in data centres depends to a large degree on the how well the power cords have been secured. When maintenance or configuration work is being performed, the cords connecting active IT hardware and the power source or PDU (Power Distribution Unit) can often be accidentally dislodged or even completely disconnected. This can lead to system disruptions or even total failures of productive hardware. What is particularly aggravating is that fixing these kinds of disruptions is time-consuming and, depending on how long it takes, can be very expensive but most aggravating of all is that these problems and risks could have been prevented in the first place if a power cord with integrated locking mechanism had been used from the outset. The power cords with integrated locking mechanism are available for all C13 or C19 plugs and for special country configurations.
The zLock Dual Sided IEC Locking Cable is the first truly universal C13 to C14 locking power cable that is 100% compatible with existing plugs and receptacles! The dual locking cables simply replace existing power cables and eliminate any accidental and vibration disconnects. They do not require a special mating plug or receptacle in order to have a secure connection. The power cables and all connected IT devices are well protected against unintentional mechanical disconnections and the resulting power supply disruptions which lead to downtime and possible hardware damage. The zLock Dual Sided IEC Locking Cable can be released by simply pulling the red sliding tabs of the C13 connector or opening the twist lock on the C14 side. Simply replace your existing power cable with the zLock Dual Sided IEC Locking Cable and enjoy your increased uptime.
The highlights of the zLock Dual Sided IEC Locking Power Cable
Unique power cable that locks both ends
Plug and play replacement for existing power cables of IT devices
Requires no mating plug or receptacle on the other side of the connection
Truly universally compatible
Prevents power cables from being dislodged
Protects hardware against power supply interruptions and related damages
Eliminates accidential and vibration disconnects
Increases the reliability of power distribution in any data centre or IT environment
Mechanism locks automatically when connected to the power supply inlet
Unlock by simply pulling the red sliding tabs (C13) or opening the twist lock (C14)
UL Listed (UL 817) and CE compliant (IEC 60320)
Cable lengths: 0.5m, 1.0m, 1.5m, 2.0m or 2.5m
Other lengths and colours available upon request
Black, White and Red available as a special order of 250 units per length in 3m, 3.5m, 4.0m, 4.5m & 5m lengths.
All lengths available as a special order or 250 per length and colour in Blue, Green, Grey and Orange.
Image showing the internal workings on the C13 Plug
Length: |
The C13 to C14 locking power cable that eliminates accidental and vibration disconnects of IT equipment
The reliability of physical power distribution in data centres depends to a large degree on the how well the power cords have been secured. When maintenance or configuration work is being performed, the cords connecting active IT hardware and the power source or PDU (Power Distribution Unit) can often be accidentally dislodged or even completely disconnected. This can lead to system disruptions or even total failures of productive hardware. What is particularly aggravating is that fixing these kinds of disruptions is time-consuming and, depending on how long it takes, can be very expensive but most aggravating of all is that these problems and risks could have been prevented in the first place if a power cord with integrated locking mechanism had been used from the outset. The power cords with integrated locking mechanism are available for all C13 or C19 plugs and for special country configurations.
The zLock Dual Sided IEC Locking Cable is the first truly universal C13 to C14 locking power cable that is 100% compatible with existing plugs and receptacles! The dual locking cables simply replace existing power cables and eliminate any accidental and vibration disconnects. They do not require a special mating plug or receptacle in order to have a secure connection. The power cables and all connected IT devices are well protected against unintentional mechanical disconnections and the resulting power supply disruptions which lead to downtime and possible hardware damage. The zLock Dual Sided IEC Locking Cable can be released by simply pulling the red sliding tabs of the C13 connector or opening the twist lock on the C14 side. Simply replace your existing power cable with the zLock Dual Sided IEC Locking Cable and enjoy your increased uptime.
The highlights of the zLock Dual Sided IEC Locking Power Cable
Unique power cable that locks both ends
Plug and play replacement for existing power cables of IT devices
Requires no mating plug or receptacle on the other side of the connection
Truly universally compatible
Prevents power cables from being dislodged
Protects hardware against power supply interruptions and related damages
Eliminates accidential and vibration disconnects
Increases the reliability of power distribution in any data centre or IT environment
Mechanism locks automatically when connected to the power supply inlet
Unlock by simply pulling the red sliding tabs (C13) or opening the twist lock (C14)
UL Listed (UL 817) and CE compliant (IEC 60320)
Cable lengths: 0.5m, 1.0m, 1.5m, 2.0m or 2.5m
Other lengths and colours available upon request
Black, White and Red available as a special order of 250 units per length in 3m, 3.5m, 4.0m, 4.5m & 5m lengths.
All lengths available as a special order or 250 per length and colour in Blue, Green, Grey and Orange.
Image showing the internal workings on the C13 Plug
Length: |
The C13 to C14 locking power cable that eliminates accidental and vibration disconnects of IT equipment
The reliability of physical power distribution in data centres depends to a large degree on the how well the power cords have been secured. When maintenance or configuration work is being performed, the cords connecting active IT hardware and the power source or PDU (Power Distribution Unit) can often be accidentally dislodged or even completely disconnected. This can lead to system disruptions or even total failures of productive hardware. What is particularly aggravating is that fixing these kinds of disruptions is time-consuming and, depending on how long it takes, can be very expensive but most aggravating of all is that these problems and risks could have been prevented in the first place if a power cord with integrated locking mechanism had been used from the outset. The power cords with integrated locking mechanism are available for all C13 or C19 plugs and for special country configurations.
The zLock Dual Sided IEC Locking Cable is the first truly universal C13 to C14 locking power cable that is 100% compatible with existing plugs and receptacles! The dual locking cables simply replace existing power cables and eliminate any accidental and vibration disconnects. They do not require a special mating plug or receptacle in order to have a secure connection. The power cables and all connected IT devices are well protected against unintentional mechanical disconnections and the resulting power supply disruptions which lead to downtime and possible hardware damage. The zLock Dual Sided IEC Locking Cable can be released by simply pulling the red sliding tabs of the C13 connector or opening the twist lock on the C14 side. Simply replace your existing power cable with the zLock Dual Sided IEC Locking Cable and enjoy your increased uptime.
The highlights of the zLock Dual Sided IEC Locking Power Cable
Unique power cable that locks both ends
Plug and play replacement for existing power cables of IT devices
Requires no mating plug or receptacle on the other side of the connection
Truly universally compatible
Prevents power cables from being dislodged
Protects hardware against power supply interruptions and related damages
Eliminates accidential and vibration disconnects
Increases the reliability of power distribution in any data centre or IT environment
Mechanism locks automatically when connected to the power supply inlet
Unlock by simply pulling the red sliding tabs (C13) or opening the twist lock (C14)
UL Listed (UL 817) and CE compliant (IEC 60320)
Cable lengths: 0.5m, 1.0m, 1.5m, 2.0m or 2.5m
Other lengths and colours available upon request
Black, White and Red available as a special order of 250 units per length in 3m, 3.5m, 4.0m, 4.5m & 5m lengths.
All lengths available as a special order or 250 per length and colour in Blue, Green, Grey and Orange.
Image showing the internal workings on the C13 Plug
Length: |
zLock Power Cord with Locking Mechanism
Protects the power supply cord of the active hardware from being accidentally dislodged
The zLock power cord sets itself apart with a locking mechanism integrated into the plug that clicks into place when a C13 or C19 plug is used for the power connection. This also prevents the power cord and the equipment connected to it from being disconnected at any time either accidentally or as a result of vibrations, thus ensuring an uninterrupted power supply and preventing downtime or even damage to the hardware. To relocate or reconfigure servers, PDUs and other equipment, the zLock plug can simply be disconnected by releasing the red locking mechanism.
The locking mechanism is directly integrated into the C13 or C19 plug for the zLock solution and does not require a counterpart for the respective socket. This means that standard wall and PDU connections can be used depending on the version.
The highlights of the zLock power cord
Power cord with integrated locking mechanism in the plug
Replaces existing power cords for IT equipment
Reliably prevents power cords from being dislodged
Prevents power interruptions and their consequences
Locking mechanism automatically clicks into place when connecting plug and socket
Connection can be released with the slider on the plug
Support for IEC-60320 C13/C14, IEC-60320 C19/C20, BS1363, Schuko Euro plug, SEV 1011
Compatible with all conventional C14 and C20 connections
Special country configurations upon request
UL, C-UL and TÜV certified
The new IEC-lock power lead design provides a simple way of securing a power lead to any electrical appliance that uses an IEC type mains lead.
As with most good designs the IEC-lock's patented locking mechanism is beautifully simple. The lead is simply connected to the appliance as any other IEC lead.
Once the lead has been fitted the IEC-lock mechanism locks it to the appliance, ensuring that the lead cannot become accidentally disconnected.
Protection of computer equipment and servers fromaccidental disconnection helping to protect valuable data
Ideal for protecting appliances that are vulnerable to vibration where standard connectors may become accidentally disconnected
Suitable for various medical applications that require a secure power source Unique 'Patented' Female C13 connector 'IEC-Lock'
Suitable for use with 'Any' standard IEC inlet
Loose coiled to avoid permanent kinks and ensure tidy installation
IEC-Lock moulded to leads are currently available with cable lengths to bare-ends with variable
Length: | |
Colour: |
The IEC Lock+ has been designed to be implemented in areas where access is limited and ease of removal is of paramount importance.
The new external release mechanism clearly differentiates the product from other leads.
As with most good designs the IEC-lock+ patented locking mechanism is beautifully simple. The lead is simply connected to the appliance as any other IEC lead.
Once the lead has been fitted the IEC-lock+ mechanism locks it to the appliance, ensuring that the lead cannot become accidentally disconnected.
Designed for use in tight spaces
Allows Data Centre Personnel to easily identify the locking cable
Protects appliances that are vulnerable to vibration
Loose coiled to avoid permanent kinks and ensure tidy installation
Connector cannot be accidentally pulled or vibrated out of the inlet
Length: | |
Colour: |
Free up space and secure power cords between rack-mount PDUs and attached IT equipment with this exclusive easy-to-use cord retention method. While these cords will fit into any standard IEC receptacle or power inlet; the "locking" feature is enabled only when used with APC AP8000 series Rack PDUs or IT equipment with built-in locking receptacles. These locking connectors reduce the probability of accidentally disconnecting cords and dropping loads.
View More
Free up space and secure power cords between rack-mount PDUs and attached IT equipment with this exclusive easy-to-use cord retention method. While these cords will fit into any standard IEC receptacle or power inlet; the "locking" feature is enabled only when used with APC AP8000 series Rack PDUs or IT equipment with built-in locking receptacles. These locking connectors reduce the probability of accidentally disconnecting cords and dropping loads.
View More
Free up space and secure power cords between rack-mount PDUs and attached IT equipment with this exclusive easy-to-use cord retention method. While these cords will fit into any standard IEC receptacle or power inlet; the "locking" feature is enabled only when used with APC AP8000 series Rack PDUs or IT equipment with built-in locking receptacles. These locking connectors reduce the probability of accidentally disconnecting cords and dropping loads.
View More
Free up space and secure power cords between rack-mount PDUs and attached IT equipment with this exclusive easy-to-use cord retention method. While these cords will fit into any standard IEC receptacle or power inlet; the "locking" feature is enabled only when used with APC AP8000 series rack PDUs or IT equipment with built-in locking receptacles. These locking connectors reduce the probability of accidentally disconnecting cords and dropping loads.
View More
Free up space and secure power cords between rack-mount PDUs and attached IT equipment with this exclusive easy-to-use cord retention method. While these cords will fit into any standard IEC receptacle or power inlet; the "locking" feature is enabled only when used with APC AP8000 series Rack PDUs or IT equipment with built-in locking receptacles. These locking connectors reduce the probability of accidentally disconnecting cords and dropping loads.
View More
Free up space and secure power cords between rack-mount PDUs and attached IT equipment with this exclusive easy-to-use cord retention method. While these cords will fit into any standard IEC receptacle or power inlet; the "locking" feature is enabled only when used with APC AP8000 series Rack PDUs or IT equipment with built-in locking receptacles. These locking connectors reduce the probability of accidentally disconnecting cords and dropping loads.
View More
A large selection of Rack PDU power cords including input power, adapter, and jumper power cords fulfill a variety of power requirements. New locking IEC power cords feature a patented, easy to use, cord retention method for added security when used with AP8000 series Rack Power Distribution Units (PDUs).
Features:
10A, 100-230V.
