IEC C19/C20 - Commando Cables

300IECC19/16AC3 - 3 Metre IEC 309 16 Amp (M) - IEC C19 (F) Power Cable

3 Metre IEC309 Commando 16amp Male Plug to IEC C19 Female Plug Power Lead

1.5mm sq Cable
IEC 309 Commando Socket rated IP 44
3 Metres


300IECC19/16AC5 - 5 Metre IEC 309 16 Amp (M) - IEC C19 (F) Power Cable

5 Metre IEC309 Commando 16amp Male Plug to IEC C19 Female Plug Power Lead
1.5mm sq Cable
IEC 309 Commando Socket rated IP 44
5 Metres

Power Cord, Locking C19 to IEC309-16A, 3.0m

Free up space and secure power cords between rack-mount PDUs and attached IT equipment with this exclusive easy-to-use cord retention method. While these cords will fit into any standard IEC receptacle or power inlet; the "locking" feature is enabled only when used with APC AP8000 series Rack PDUs or IT equipment with built-in locking receptacles. These locking connectors reduce the probability of accidentally disconnecting cords and dropping loads.

Key Features

Maximum Total Current Draw 16 Maximum Input Current 16A Maximum Line Current 16A Cord Length 3.0 Meters

APC offers power cords (also known as jumper cords), which provide connector options to fulfill a variety of power requirements. Use these power cords to connect your equipment to an APC Rack-Mount power distribution unit (PDU)/outlet strip, MasterSwitch product, Automatic Transfer Switch (ATS), or UPS. These power cords can also be used to connect your APC Rack-Mount (PDU)/Outlet Strip to a power source, such as an APC UPS, ATS, or separate branch circuit.

This cable connects an IEC C20 outlet to an IEC 309-16A connector. It can be used as a means to plug in a 16A IEC 309 plug into a Rack PDU with IEC C20 outlets.

Features:

APC 2.5m Power Cord (16A 230V C20 to IEC 309F) - Black
Maximum Total Current Draw per Phase: 16A
Two years repair or replace
Input Connection: IEC 309 16A 2P+E
Nominal Input Voltage: 230V
Output Connections: (1) IEC 320 C20
Colour: Black

Power Cord, Locking C19 to Rewireable, 3.0m

Free up space and secure power cords between rack-mount PDUs and attached IT equipment with this exclusive easy-to-use cord retention method. While these cords will fit into any standard IEC receptacle or power inlet; the "locking" feature is enabled only when used with APC AP8000 series Rack PDUs or IT equipment with built-in locking receptacles. These locking connectors reduce the probability of accidentally disconnecting cords and dropping loads.

Key Features

Maximum Total Current Draw 16 Maximum Input Current 16A Maximum Line Current 16A Cord Length 3.0 Meters

Power Cord, C20 to IEC309 (16A), 2.5m

This cable connects an IEC C19 outlet to an IEC 309-16A connector. It can be used as a means to plug in a 16A IEC 309 plug into a Rack PDU with IEC C19 outlets.

Key Features

Input Connections IEC 60320 C20 Cord Length 2.5 Meters