zLock IEC C19-C20 320 Black Dual Locking Cable
The C19 to C20 locking power cable that eliminates accidental and vibration disconnects of IT equipment.
The reliability of physical power distribution in data centres depends to a large degree on the how well the power cords have been secured. When maintenance or configuration work is being performed, the cords connecting active IT hardware and the power source or
PDU (
Power Distribution Unit) can often be accidentally dislodged or even completely disconnected. This can lead to system disruptions or even total failures of productive hardware. What is particularly aggravating is that fixing these kinds of disruptions is time-consuming and, depending on how long it takes, can be very expensive but most aggravating of all is that these problems and risks could have been prevented in the first place if a power cord with integrated locking mechanism had been used from the outset.
The power cords with integrated locking mechanism are available for all C19 or C20 plugs and for special country configurations. The zLock Dual Sided IEC Locking Cable is the first truly universal C19 to C20 locking power cable that is 100% compatible with existing plugs and receptacles! The dual locking cables simply replace existing power cables and eliminate any accidental and vibration disconnects. They do not require a special mating plug or receptacle in order to have a secure connection.
The power cables and all connected IT devices are well protected against unintentional mechanical disconnections and the resulting power supply disruptions which lead to downtime and possible hardware damage. The zLock Dual Sided IEC Locking Cable can be released by simply pulling the red sliding tabs of the C19 connector or opening the twist lock on the C20 side. Simply replace your existing power cable with the zLock Dual Sided IEC Locking Cable and enjoy your increased uptime.
The highlights of the zLock Dual Sided IEC Locking Power Cable
- Unique power cable that locks both ends
- Plug and play replacement for existing power cables of IT devices
- Requires no mating plug or receptacle on the other side of the connection
- Truly universally compatible
- Prevents power cables from being dislodged
- Protects hardware against power supply interruptions and related damages
- Eliminates accidental and vibration disconnects
- Increases the reliability of power distribution in any data centre or IT environment
- Mechanism locks automatically when connected to the power supply inlet
- Unlock by simply pulling the red sliding tabs (C19) or opening the twist lock (C20)
- UL Listed (UL 817) and CE compliant (IEC 60320)
- Cable lengths: 0.5m, 1.0m, 1.5m, 2.0m or 2.5m
- Other lengths and colours available upon request
Black, White and Red available as a special order of 250 units per length in 3m, 3.5m, 4.0m, 4.5m & 5m lengths.
The C19 to C20 locking power cable that eliminates accidental and vibration disconnects of IT equipment.
The reliability of physical power distribution in data centres depends to a large degree on the how well the power cords have been secured. When maintenance or configuration work is being performed, the cords connecting active IT hardware and the power source or PDU (Power Distribution Unit) can often be accidentally dislodged or even completely disconnected. This can lead to system disruptions or even total failures of productive hardware. What is particularly aggravating is that fixing these kinds of disruptions is time-consuming and, depending on how long it takes, can be very expensive but most aggravating of all is that these problems and risks could have been prevented in the first place if a power cord with integrated locking mechanism had been used from the outset.
The power cords with integrated locking mechanism are available for all C19 or C20 plugs and for special country configurations. The zLock Dual Sided IEC Locking Cable is the first truly universal C19 to C20 locking power cable that is 100% compatible with existing plugs and receptacles! The dual locking cables simply replace existing power cables and eliminate any accidental and vibration disconnects. They do not require a special mating plug or receptacle in order to have a secure connection.
The power cables and all connected IT devices are well protected against unintentional mechanical disconnections and the resulting power supply disruptions which lead to downtime and possible hardware damage. The zLock Dual Sided IEC Locking Cable can be released by simply pulling the red sliding tabs of the C19 connector or opening the twist lock on the C20 side. Simply replace your existing power cable with the zLock Dual Sided IEC Locking Cable and enjoy your increased uptime.
The highlights of the zLock Dual Sided IEC Locking Power Cable
- Unique power cable that locks both ends
- Plug and play replacement for existing power cables of IT devices
- Requires no mating plug or receptacle on the other side of the connection
- Truly universally compatible
- Prevents power cables from being dislodged
- Protects hardware against power supply interruptions and related damages
- Eliminates accidental and vibration disconnects
- Increases the reliability of power distribution in any data centre or IT environment
- Mechanism locks automatically when connected to the power supply inlet
- Unlock by simply pulling the red sliding tabs (C19) or opening the twist lock (C20)
- UL Listed (UL 817) and CE compliant (IEC 60320)
- Cable lengths: 0.5m, 1.0m, 1.5m, 2.0m or 2.5m
- Other lengths and colours available upon request
Black, White and Red available as a special order of 250 units per length in 3m, 3.5m, 4.0m, 4.5m & 5m lengths.