MikroTik Outdoor WiFi

NetBox5 RB911G-5HPacD-NB - 802.11ac support for up to 540Mbits, waterproof enclosure, high output 

The NetBox is a dual chain outdoor client device with RP-SMA connectors for antennas, and a cable hood for protection against moisture. This device supports the new 802.11a/n/ac standard for increased wireless speed (866Mbit datarate, and 20/40/80MHz channels).

The case can be opened with one hand, and is protected against the elements. Ethernet and a Grounding wire exits are provided on the bottom, behind a protective door.

Comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. Package also includes a PoE injector and power supply unit.

New products are backwards compatible- for example, you can replace your 5GHz 802.11an legacy Access Point with new 802.11ac product and your existing customers will still be able to connect to it.

- RB911G-5HPacD-NB (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).


RB911G-5HPacD-NB NetBox5 Specifications:



Product code: RB911G-5HPacD-NB
Architecture: MIPSBE
CPU: QCA9557
CPU core count: 1
CPU nominal frequency: 720 MHz
RouterOS license: 4
Operating System: RouterOS
RAM: 128 MB
Storage type: NAND
Storage: 128 MB
MTBF: Approximately 200'000 hours at 25C
Tested ambient temperature: -40°C to +70°C
Number of DC inputs: 1 (PoE-IN)
Max power consumption: 11.5 W
FAN count: Passive
PoE in: Passive PoE
PoE in input Voltage: 8-30 V
Wireless 5 GHz Max data rate: 867 Mbit/s
Wireless 5 GHz number of chains: 2
Wireless 5 GHz standards: 802.11a/n/ac
Wireless 5 GHz chip model: QCA9882
Wireless 5 GHz generation: Wi-Fi 5
10/100/1000 Ethernet ports: 1
PCB temperature monitor: Yes
Voltage Monitor: Yes
Certification: CE, FCC, IC, EAC, ROHS
IP: IP54

BaseBox 5 RB912UAG-5HPND-OUT - 5Ghz integrated AP/Backbone/CPE, 2xRPSMA connectors, miniPCI-e slot, Gigabit Ethernet

The RB912 is in an outdoor enclosure, fitted with two RPSMA connectors for antennas, and a cable hood for protection against moisture. Three additional positions for antenna connectors are also provided. You can use the RB912 miniPCIe slot for one more wireless interface to make a dual band device, if you wish to.

The case can be opened with one hand, and is protected against the elements. USB, Ethernet and a Grounding wire exits are provided on the bottom, behind a protective door.


Box contains: RB912 outdoor unit, PSU, PoE injector, mounting loop for tower/pole mounting, DIN rail mount

- RB912UAG-5HPnD-OUT (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).


RB912UAG-5HPND-OUT BaseBox 5 Specifications:



10/100 Ethernet ports: None
10/100/1000 Ethernet ports: 1
Antenna gain: No
Architecture: MIPSBE
CPU: AR9342
CPU core count: 1
CPU nominal frequency: 600 MHz
Dimensions: 246 x 135 x 50mm
Ethernet Combo ports: 0
License level: 4
Max power consumption: 12 W
Number of DC inputs: 1
Number of SIM slots: 1
Number of USB ports: 1
Operating System: RouterOS
PoE in: Passive PoE
PoE in input Voltage: 8-30 V
SFP ports: None
SFP+ ports: None
RAM: 64 MB
Storage: 128 MB
USB slot type: USB type A
Wireless 1 band: 5 GHz
Wireless 1 Number of chains: 2

DISC Lite5 ac RBDISCG-5ACD - Outdoor 5GHz 802.11a/n/ac wireless device with a backfire type 21dBi integrated antenna and Gigabit Ethernet for longer distances

The DISC is a low cost high gain 5 GHz CPE (wireless AP). MikroTix have improved antenna design, added Gigabit Ethernet port and 802.11a/n/ac support to achieve even more speed on longer distances.

DISC Lite5 ac is equipped with 21 dBi dual chain antenna, 802.11a/n/ac integrated wireless, 716 MHz CPU, 256 MB RAM, 1x Gigabit Ethernet port and RouterOS Level 3 licence. It comes complete with a power supply, Gigabit PoE injector and a mounting ring. The device is also compatible with our SXT mounting systems, including the quickMOUNT pro series.

The RouterOS Level 3 allows to use the DISC Lite5 ac as a CPE (wireless AP) or for 5 GHz Point-to-Point links.

- DISC Lite5 (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).


DISC Lite5 ac Specifications:



Product code: RBDiscG-5acD 
10/100 Ethernet ports: None
10/100/1000 Ethernet ports: 1
Antenna gain: 21
Architecture: ARM 32bit
CPU: IPQ-4018
CPU core count: 4
CPU nominal frequency: 716 MHz
Dimensions: diameter 265mm, height 80mm
Ethernet Combo ports: 0
licence level: 3
Max power consumption: 7W
Number of DC inputs: 1
Number of SIM slots: 0
Number of USB ports: 0
Operating System: RouterOS
PoE in: assive PoE
PoE in input Voltage: 10-30 V
SFP ports: None
SFP+ ports: None
RAM: 256 MB
Storage: 16 MB
Wireless 1 band: 5 GHz
Wireless 1 Number of chains: 2

MikroTix LHG XL 52 ac - An extremely powerful dual-band backbone / CPE for long-distance connection without downtime

Need a reliable and strong long-distance connection that never goes down? The new LHG XL 52 ac will provide just that with its dual-band capability. 

The MikroTik LHG XL 52 AC is the perfect choice for mission critical links that cannot afford any downtime, whether its a link between your business premises, network backup or CCTV applications. The dual-radio dual-band LHG 52 setup is easy, the 5GHz radio acts as the main link with speeds of up to 600Mbps, use the 2.4GHz radio as an automatic backup connection with speeds of up to 260 Mbps. No extra hardware or human intervention needed.

The powerful 27 dBi 5 GHz / 18 dBi 2.4 GHz antenna will provide connection with link distance up to 40 km. The grid design ensures protection against wind, it can withstand temperatures from -40°C to +70°C. Antenna element is built into the wireless unit, so no loss on cables. This device can handle the heaviest loads thanks to the impressive quad-core CPU and 256 MB of RAM. It has a Gigabit Ethernet port, an SFP port, and it is 802.3af/at compliant.


LHG XL 52 ac Specifications:



Product code: RBLHGG-5HPacD2HPnD-XL
Architecture: ARM 32bit
CPU: IPQ-4018
CPU core count: 4
CPU nominal frequency: 716 MHz
Dimensions: 550mm x 291mm
licence level: 3
Operating System: RouterOS
RAM: 256 MB
Storage: 16 MB
Storage type: FLASH
Tested ambient temperature: -40°C to +70°C
PoE in: 802.3af/at
PoE in input Voltage: 12-57 V
Number of DC inputs: 1 (PoE-IN)
Max power consumption: 18W
Max power consumption without attachments: 16 W
AC speed: AC1200
Wi-Fi generation: 5
10/100/1000 Ethernet ports: 1
SFP ports: 1
PCB temperature monitor: Yes
Voltage Monitor: Yes
Mode button: Yes

MikroTik wAP 60G - 60 GHz CPE with Phase array 60° beamforming Integrated antenna, 716 Mhz CPU, 256 MB RAM, PSU and PoE, RouterOS L3

The wAP 60G is weatherproof integrated 60 GHz wireless unit, that can be used indoors or outdoors as Point-to-Point or CPE (wireless AP) unit.

The wAP 60G has an extremely capable CPU, making it possible for wire speed throughput in nearly all packet sizes.

With the wAP60GCPE you can create a high-speed Point-to-Multipoint network setup in the 60GHz frequency that is not affected by the crowded WiFi spectrum. Saving you from all those DFS (Distributed File System) issues.

The box includes: a wall mounting kit, straps for pole mounting, power supply, PoE injector and also table stand for using the device indoors. Penetrates some windows depending on material.

wAP 60G connects to 60 GHz AP for distances of 200m+

For Point to Multi Point links check out the wAP 60G AP: RBWAPG-60AD-A


wAP 60G - RBwAPG-60ad Specifications:



10/100 Ethernet ports: None
10/100/1000 Ethernet ports: 1
Architecture: ARM 32bit
CPU: IPQ-4019
CPU core count: 4
CPU nominal frequency: 716 MHz
DC jack input Voltage: 11-57 V
Dimensions: 185 x 85 x 30mm
Ethernet Combo ports: 0
licence level: 3
Max power consumption: 5 W
Number of DC inputs: 2
Number of SIM slots: 0
Number of USB ports: 0
Operating System: RouterOS
PoE in: 802.3af/at
PoE in input Voltage: 11-57 V
SFP ports: None
SFP+ ports: None
SRAM: 256 MB
Storage: 16 MB
Wireless 1 Number of chains: 0

The MikroTik wAP LoRa8 is an all in one, out-of-the-box, ready to use LoRa® WAN Gateway 863-870 MHz wAP LR8 Kit 

This kit contains a pre-installed UDP packet forwarder to any public or private LoRa® servers and an outdoor weatherproof wireless access point with 2.4 GHz WLAN interface and Ethernet port that could be used as a backend.

This particular wAP form-factor has been tested in many other MikroTik products - it can deliver excellent and stable performance in almost any weather conditions.

You can use the optional internal 2 dBi antenna* or attach an external antenna. For extra network coverage MikroTik suggest adding the MikroTik Antenna kit for LoRa®.

* By default, the internal antenna is not connected to the card! Please refer to the User Manual Page 7 Antenna usage section for details. (downloadable here, from our Documentation tab)

wAP LR8 kit supports 863-870 MHz frequency, used in European Union, Russia, India etc.

The device has an operating system preinstalled and licensed. No separate purchase is necessary and the product is ready to use. The device includes free software updates for the life of the product or a minimum of 5 years starting from date of purchase.


wAP LR8 kit Specifications:



Product code: RBWAPR-2ND-R11E-LR8
Architecture: MIPSBE
CPU: QCA9531
CPU core count: 1
CPU nominal frequency: 650 MHz
licence level: 4
RAM: 64 MB
Storage: 16 MB
Storage type: FLASH
Tested ambient temperature: -40°C to 60°C
Powering: Passive PoE
PoE in input Voltage: 9-30 V
Number of DC inputs: 3 (DC jack, PoE-IN, Automotive)
DC jack input Voltage: 9-30 V
Automotive input Voltage: 9-30 V
Max power consumption: 7W
Antenna gain dBi for 2.4 GHz: 2
Wireless 2.4 GHz standards: 802.11b/g/n
Wireless 2.4 GHz Max data rate: 300 Mbit/s
Wireless 2.4 GHz number of chains: 2
Wireless 2.4 GHz chip model: QCA9531
Wi-Fi generation: 4
10/100 Ethernet ports: 1
Number of SIM slots: 1 Modem (Mini SIM)
MiniPCI-e slots: 1
PCB temperature monitor: Yes
Voltage Monitor: Yes

SXT 2 - 10dbi 60 degree integrated AP/Backbone/CPE, dual chain, Gigabit Ethernet

The MikroTik RouterBoard SXTG-2HnD is a complete MikroTik AP/CPE for 2.4Ghz. It's powerful 60 degrees 2x2 MIMO 10dbi sector antenna with 1600mW wireless on-board- you can use it as a Sector AP, to make wireless point-to-point links or as a CPE* - whatever you prefer! It comes with L4 licence, perfect for covering outdoor area for hotspot clients.

Unit is equipped with Gigabit Ethernet port, so customers can take full advantage of dual chain MIMO. It has the same form factor as our popular 5Ghz SXT model.

The device has an operating system preinstalled and licenced. No separate purchase is necessary and the product is ready to use. The device includes free software updates for the life of the product or a minimum of 5 years starting from date of purchase...

Package contains SXTG-2HnD, mounting loops, PoE injector, power adapter

*(Customer Premises Equipment)



SXT installation guide:




SXTG-2HND Specifications:

Product code: RBSXTG2HnD
CPU speed: 400MHz
RAM: 32MB
Architecture: MIPS-BE
LAN ports: 1
Gigabit: Yes
Integrated Wireless: Yes
Wireless standards: 802.11b/g/n
USB: 1
PoE: 8-30V DC
Voltage Monitor: Yes
CPU temperature monitor: No
PCB temperature monitor: Yes
Dimensions: 140 x 140 x 56mm
Operating System: RouterOS
Temperature range: -30°C to +80°C
RouterOS licence: L4
Antenna Gain: 10dBi
Antenna Beamwidth: 60Degs (+/-3dB)
Current Monitor: No
TX power: 32dBm
CPU: AR7242
Max Power consumption: Up to 7W

SXT SA5 - 14dBi integrated Sector AP, 90 degrees beamwidth, Gigabit Ethernet + Gbit PoE + PSU

SXTG-5HPnD-SAr2 is a low cost, high speed 5GHz outdoor wireless sector access point. It has a 90 degree antenna to provide a wider coverage than our previous SXT units.

Complete with a ready to mount enclosure and built-in 14dBi antenna, the package contains everything you need to set it up in a matter of minutes. The inside of the case is covered in special shielding to improve operation in high interference areas and antenna front to back ratio.

Box contains: SXT wireless device with integrated antenna, pole mounting bracket, mounting ring, PoE injector, power adapter, quick setup guide

- RBSXTG-5HPnD-SAr2 (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).


RBSXTG-5HPnD-SAr2 - SXT SA5 Specifications:

10/100 Ethernet ports: None
10/100/1000 Ethernet ports: 1
Antenna gain: 14
Architecture: MIPSBE
CPU: AR9344
CPU core count: 1
CPU nominal frequency: 600 MHz
Dimensions: 140 x 140 x 56mm
Ethernet Combo ports: 0
licence level: 4
Max power consumption: 11W
Number of DC inputs: 1
Number of SIM slots: 0
Number of USB ports: 1
Operating System: RouterOS
PoE in: Passive PoE
PoE in input Voltage: 6-30 V
SFP ports: None
SFP+ ports: None
RAM: 64 MB
Storage size: 128 MB
USB slot type: USB type A
Wireless 1 band: 5 GHz
Wireless 1 Number of chains: 2