The nRayAIM-DH1 is an alignment and aiming attachment for the nRAY 60GHz. Use it to attach a scope of your choice for easier installation and improved precision when aligning the Wireless Wire nRAY.
For use as 60GHz CPE in Point-to-Multipoint setups for connections up to 800m with 60GHz Base Stations, with Gigabit Ethernet port for speeds up to 1Gbps.
A perfect solution for crowded wireless spectrum; no need to share the frequency with your neighbours and lose valuable time, the LHG 60G offers a simple and effective 60 GHz solution for wireless connection where the 2 GHz and 5GHz wireless space is crowded and unreliable. Connect up to eight of these units to a 60 GHz access point, such as our wAP60G AP or wAP 60Gx3 AP, and enjoy the smooth connection with data rate up to 2 Gbps.
The effective point-to-point distance between two LHG 60G units is up to 1500 meters, and with point-to-multipoint it is up to 800 meters. The grid design ensures protection against wind, it can withstand temperatures from -40°C to +70°C. The antenna element is built into the wireless unit, so no loss on cables.
The LHG 60G is shipped with an Aim tool for easy precision alignment and a strong metal LHG mount. Order it today and forget about wireless interference!
RBLHGG-60AD Specifications:
Product code: RBLHGG-60ad
Architecture: ARM 32bit
CPU: IPQ-4019
CPU core count: 4
CPU nominal frequency: 716 MHz
RouterOS license: 3
Operating System: RouterOS
RAM: 256 MB
Storage: 16 MB
Storage type: FLASH
MTBF: Approximately 200'000 hours at 25°C
Tested ambient temperature: -40°C to 70°C
IPsec hardware acceleration: Yes
Number of DC inputs: 1 (PoE-IN)
Max power consumption: 5W
FAN count: Passive
PoE in: 802.3af/at
PoE in input Voltage: 12-57 V
10/100/1000 Ethernet ports: 1
Certification: CE, FCC, IC, EAC, ROHS
IP: IP55
.jpg)
The MikroTik wAP 60G AP is a 60 GHz Base Station with Phase array 60° Beamforming Integrated antenna, 716 Mhz CPU, 256 MB RAM, PSU and PoE, RouterOS L4
The wAP 60G AP is weatherproof integrated 60 GHz wireless unit, that can be used indoors or outdoors in different scenarios - Base Station, Point-to-Point or CPE.
The box includes a wall mounting kit, straps for pole mounting, power supply, PoE injector and also table stand for using the device indoors. Penetrates some windows depending on material.
wAP 60G AP supports up to eight simultaneous clients on distances of 200m+.
RBWAPG-60AD-A Specifications:
Product code: RBwAPG-60ad-A
Architecture: ARM 32bit
CPU: PQ-4019
CPU core count: 4
CPU nominal frequency: 716 MHz
Dimensions: 185 x 85 x 30mm
RouterOS license: 4
Operating System: RouterOS
RAM: 256 MB
Storage size: 16 MB
Storage type: FLASH
MTBF: Approximately 200'000 hours at 25°C
Tested ambient temperature: -40°C to 70°C
IPsec hardware acceleration: Yes
Number of DC inputs: 2 (DC jack and PoE-IN)
DC jack input Voltage: 11-57 V
Max power consumption: 5W
FAN count: Passive
PoE in: 802.3af/at
PoE in input Voltage: 11-57 V
10/100/1000 Ethernet ports: 1
Certification: CE, FCC, IC, EAC, ROHS
IP: 55
