Fluke Networks PRO3000 Analog Toner and Probes

Use the SmartTone capability of the Pro3000 Analog Tone Generator to identify the right pair. When touching the wires together and momentarily shorting the far end of a cable pair, the SmartTone technology will change the cadence of the tone generated.

This tone change you hear through the probe positively verifies the correct wire pair. SmartTone provides five distinct tones for exact pair identification.

Tone Generator features:
SmartTone technology
Send tone signal up to 10 miles on most cables Line cord features angled bed-of-nails clips and ruggedized RJ-11 plug for direct access to phone and data jacks without adapters
External switch allows selection of solid or alternating tone options, indi­cated with solid or flashing LEDs
Continuity testing
Line polarity confirmation


 

Use the SmartTone capability of the Pro3000 Analog Tone Generator to identify the right pair. When touching the wires together and momentarily shorting the far end of a cable pair, the SmartTone technology will change the cadence of the tone generated.

This tone change you hear through the probe positively verifies the correct wire pair. SmartTone provides five distinct tones for exact pair identification.

Tone Generator features:
SmartTone technology
Send tone signal up to 10 miles on most cables Line cord features angled bed-of-nails clips and ruggedized RJ-11 plug for direct access to phone and data jacks without adapters
External switch allows selection of solid or alternating tone options, indi­cated with solid or flashing LEDs
Continuity testing
Line polarity confirmation


 

The Pro3000's ergonomic sleek design is easy to handle and use. The large speaker on the probe makes the tone easier to hear through walls, enclosures, wood or plaster. A recessed on/off button helps prevent the probe from accidentally being turned on in the pouch. It accommodates a headset (sold separately) for use in noisy environments.

Probe features:
Loud large speaker amplifies tone through walls, enclosure, wood or plaster
Easy-to-use adjustable volume control dial
"Quick-twist" tip for easy replacement
Free spare tip inside Pro3000 Tone and Probe Kit


 

Signal Interference can be caused by multiple sources (I.e. power cables, fans, lighting, etc.) and can make tracing communication cabling almost impossible.

The Pro3000F probe utilizes innovative filter technology to obstruct signal interference to make tracing your cable easier, regardless of the work environment.
Pro3000F Filtered Probe features:

Innovative filtered probe obstructs signal of 60 Hz or 50 Hz external interference
Switch between filtered and unfiltered modes with one button press.
Tone and trace wire on non-active networks
Auto-off capability extends battery life
Loud probe speaker is audible in noisy locations
Technicians can also switch between filtered and unfiltered modes with a simple push of a button. The probe’s loud speaker also allows for use in noisy locations and for tracing cable through drywall, wood and other enclosures. The probe also touts an auto-off feature that deactivates the probe after 5 minutes to conserve battery life.

The Pro3000F Filtered probe becomes even more useful when paired with the the Pro3000 Tone Generator. The Pro3000 Tone Generator allows for direct connection to unterminated wire using the angle bed of nails clips or terminated RJ-type jacks with the male RJ-11 plug. The tone generators strong tone and SmartTone™ technology allows for precise pair identification up to 10 miles (16 km) away.

Pro3000F Filtered Probe Specifications User Interface ON/OFF button (Push 1 second to activate, Press to turn off, Auto-off after 5 minutes)
Filtered/Unfiltered Mode Button with LED (Green = Filtered, Red = Unfiltered)
Volume dial
Replaceable tip
3.5 mm earphone jack Frequencies filtered Pro3000F60 Probe: 60 Hz and its harmonic frequencies
Pro3000F50 Probe: 50 Hz and its harmonic frequencies Battery 9V alkaline Temperature Operating: -20° C to 60° C, Storage: -40° to 70° C Dimensions 9.8 in. x 1.6 in. x 1.3 in. (24.9 cm x 4.1 cm x 3.3 cm)


Feature Pro3000 Analog
Tone and Probe Pro3000F60-KIT Pro3000F50-KIT Intellitone Pro 200
(MT-8200-60-KIT) Analog Signal tracing • • • • Digital Signal tracing       • SmartTone™ • • • • Used on Inactive Networks • • • • Used on Active Networks       • Frequency Filter   60 Hz 50 Hz   3.5 mm Jack         Replacable Tip • • •   Auto-Off   X (Probe - 5 minutes) X (Probe - 5 minutes) X (Toner= 2.5 hours, Probe = 1 hour) Wiremap       • Signal Strength Indicator       •

Signal Interference can be caused by multiple sources (I.e. power cables, fans, lighting, etc.) and can make tracing communication cabling almost impossible.

The Pro3000F probe utilizes innovative filter technology to obstruct signal interference to make tracing your cable easier, regardless of the work environment.
Pro3000F Filtered Probe features:

Innovative filtered probe obstructs signal of 60 Hz or 50 Hz external interference
Switch between filtered and unfiltered modes with one button press.
Tone and trace wire on non-active networks
Auto-off capability extends battery life
Loud probe speaker is audible in noisy locations
Technicians can also switch between filtered and unfiltered modes with a simple push of a button. The probe’s loud speaker also allows for use in noisy locations and for tracing cable through drywall, wood and other enclosures. The probe also touts an auto-off feature that deactivates the probe after 5 minutes to conserve battery life.

The Pro3000F Filtered probe becomes even more useful when paired with the the Pro3000 Tone Generator. The Pro3000 Tone Generator allows for direct connection to unterminated wire using the angle bed of nails clips or terminated RJ-type jacks with the male RJ-11 plug. The tone generators strong tone and SmartTone™ technology allows for precise pair identification up to 10 miles (16 km) away.

Pro3000 Analog Tone Generator and SmartTone™

Use the SmartTone™ capability of the Pro3000 Tone Generator to identify the right pair. Simply short the selected pair at the near or far end to change the cadence of the tone generated. The tone change you hear through the probe can help you identify the correct wire pair. SmartTone™ provides five distinct tones for exact pair identification.
Tone Generator features:

SmartTone™
Send tone signal up to 10 miles on most cables
Line cord features angled bed-of-nails clips and a rugged RJ-11 plug for direct access to phone and data jacks without adapters
External switch allows selection of solid or alternating tone options, indicated with solid or flashing LEDs
Continuity Testing
Line polarity confirmation

Pro3000F Filtered Probe Specifications User Interface ON/OFF button (Push 1 second to activate, Press to turn off, Auto-off after 5 minutes)
Filtered/Unfiltered Mode Button with LED (Green = Filtered, Red = Unfiltered)
Volume dial
Replaceable tip
3.5 mm earphone jack Frequencies filtered Pro3000F60 Probe: 60 Hz and its harmonic frequencies
Pro3000F50 Probe: 50 Hz and its harmonic frequencies Battery 9V alkaline Temperature Operating: -20° C to 60° C, Storage: -40° to 70° C Dimensions 9.8 in. x 1.6 in. x 1.3 in. (24.9 cm x 4.1 cm x 3.3 cm)


Feature Pro3000 Analog
Tone and Probe Pro3000F60-KIT Pro3000F50-KIT Intellitone Pro 200
(MT-8200-60-KIT) Analog Signal tracing • • • • Digital Signal tracing       • SmartTone™ • • • • Used on Inactive Networks • • • • Used on Active Networks       • Frequency Filter   60 Hz 50 Hz   3.5 mm Jack         Replacable Tip • • •   Auto-Off   X (Probe - 5 minutes) X (Probe - 5 minutes) X (Toner= 2.5 hours, Probe = 1 hour) Wiremap       • Signal Strength Indicator       •