Fluke Networks MicroScanner PoE

Next-generation MicroScanner verifies voice/data/video cable and services with a revolutionary user interface.

The MicroScanner PoE Verifier Includes:
MicroScanner PoE Verifier
MS-POE Wiremap Adapter
Getting Started Guide
Fluke Networks Carry Pouch
Batteries

Streamlined verification testing

The MicroScannerTM Cable Verifier series simplifies the testing of voice, data, and video cable. It starts by taking results from what was four different test modes and displaying them all at once – graphical wiremap, pair lengths, distance to fault, cable ID, and far end device. What’s more, it supports virtually any type of low-voltage cable testing with no need for awkward adapters. The end result is reduced test time and technician error. That makes high-quality installations more efficient than ever.


MicroScanner PoE Capabilities:
Quickly determine if a problem is caused by a bad or unconnected cable, insufficient power, or a Powered Device (PD).
Information for the Network Engineer to investigate potential switch configuration or malfunctions.
PoE Switch Verification – Determine if a switch port can provide enough power by reporting PoE class (0-8).
Powered Pairs – Graphically identifies powered pairs. Including Dual Signature where the switch port delivers power on 2 or 4 pairs (802.3bt or PoE ++)
PoE Injector verification - Display injector voltage level
Active Switch Detection - Determine if a cable is connected to a switch port and port speed up to 10G
Cable Testing – Identify any shorted, open or crossed wires at both ends, length of each pair, and send tones to find cables.





MicroScanner Series Features:
Straightforward Interface – Graphical wiremap, length, cable ID, and distance to fault displayed on one screen
Multimedia Support – Tests all common media types including RJ11, RJ45, Coax(MS2 only), with no need for adapters
IntelliTone Toning – Trace virtually any cable or wire pair with IntelliTone digital and analog toning
VDV Service Detection – Verifies today’s media services, including 10/100/1000 Ethernet, POTS, and PoE
Oversized Display – Large, backlit LCD makes results crystal clear whether in bright sunshine or a dark closet
Magnetic Strap (included in MicroScanner kits) - Allows technicians to keep their hands free and their tester safe from potential drops and accidents with strong rare earth magnet

Rule out service problems fast

Today’s communications technicians have a lot more problems to deal with than just the cabling. They have to rule out a whole host of potential cable and service issues before determining the cause of a connection problem.

The MicroScanner Cable Verifier series is equipped to answer the question to reduce time troubleshooting. Is there telephone voltage? What’s the polarity? Is there an Ethernet switch at the far end? Is PoE available? If PoE is available, is it enough to run my device? The MicroScanner Series acknowledges this, giving technicians the vision to verify today’s most common voice, data, and video services. That means faster, more comprehensive troubleshooting.


Comparison Chart   MicroScanner2 MicroScanner PoE Twisted Pair (RJ-11, RJ-45) Wiremap • • Length / Distance to Fault • • Coaxial Length / Distance to Fault •   Service Identification Reports Maximum Power Class   • 10/100/1000BASE-T • • 2.5GBASE-T, 5GBASE-T, 10GBASE-T   • Power Over Ethernet 802.3af 802.3af, 802.3at, 802.3bt Analog and Digital Toning • • Optional Remote Identifiers • •

PoE Verification

MicroScanner PoE cuts through the confusion of your PoE installation by providing swift and simple PoE verification. The tester detects the available PoE class (0-8) provided by the connected switch in accordance to the latest PoE standards and displays the voltage from passive PoE sources. This information keeps the technician informed on the installations capabilities and improves their work flow and reduces the time spent waiting for information about the connected switch.


Revolutionary Interface

Yesterday's cable verification testers force users to toggle between up to four different modes of operation to view all test results.  This not only slows the test process, but also causes frustration and leads to high user error rates.  MicroScanner has defeated this convention by displaying key test results – wiremap, pair lengths, distance to fault, cable ID, and far end device – all on one screen.  Plus it features an oversized, backlit LCD screen with the power to display wiremap results graphically, which brings unprecedented comfort and clarity to the user experience.


Multimedia Support

Tired of losing or breaking all the adapters needed for testing the various voice, data, and video media types?  MicroScanner makes these awkward adapters things of the past with built-in RJ11, RJ45, and coax support.  Both the main unit and the far-end identifiers can be used to test telephone jacks, Ethernet jacks, and CATV outlets right out of the box.  Just one more way MicroScanner2 streamlines cable verification.




IntelliTone Toning

MicroScanner features built-in IntelliTone digital and analog toning to precisely locate virtually any cable or wire pair, regardless of work environment.  Use digital mode to locate high-grade data cabling (Cat 5e/6/6a) in bundles, or at switches, patch panels, or wall outlets.  Digital mode especially performs in environments with high data, RF, or electromagnetic interference.  When coupled with the IntelliTone 200 Pro Probe, it can also be used to verify cable wiremap from either the tester end or the probe end. 

Use analog mode on voice-grade cabling (Cat 3 and below), as well as coax, security/alarm, and speaker wiring.  These cables are optimized for lower frequency transmissions, and therefore are more easily isolated with a low-frequency tone.  MicroScanner2’s smart analog tone eliminates frustrating guesswork locating individual wire pairs during installations by changing songs each time the pair under test is shorted together.  This provides technicians a decisive way to identify individual wire pairs before punching them down or when diagnosing voice transmission problems.


VDV Service Detection

Voice, data, video technicians have a lot more problems to deal with than just the cabling.  They have to rule out a whole host of potential cable and service issues before determining the cause of a connection problem.  MicroScanner acknowledges this, giving technicians high power vision to detect today’s most common service problems.   Detect the presence of POTS voltage and verify polarity.  Verify powered 10/100/1000 Ethernet switches at the far end.  Or, confirm proper PoE voltage and pairs.


Rugged Housing

With all the abuse you put your tools through, you can’t afford for them to be delicate. MicroScanner features a rubber wrap-around holster that makes it the right tool for even the toughest jobs. Toss it into your toolbox. It can handle it. Plus, it now comes standard with a vinyl carry pouch for enhanced protection and convenience.

Next-generation MicroScanner verifies voice/data/video cable and services with a revolutionary user interface.

The MicroScanner PoE Professional Kit Contains:
MicroScanner PoE Verifier
MS-POE Wiremap Adapter
Intellitone Pro 200 Probe
RJ45 Remote IDs #2-7
Patch Cords (Shielded RJ45 & RJ11)
Getting Started Guide
Magnetic Strip Attachment
Deluxe Fluke Networks Carry Pouch
Batteries

Streamlined verification testing

The MicroScannerTM Cable Verifier series simplifies the testing of voice, data, and video cable. It starts by taking results from what was four different test modes and displaying them all at once – graphical wiremap, pair lengths, distance to fault, cable ID, and far end device. What’s more, it supports virtually any type of low-voltage cable testing with no need for awkward adapters. The end result is reduced test time and technician error. That makes high-quality installations more efficient than ever.


MicroScanner PoE Capabilities:
Quickly determine if a problem is caused by a bad or unconnected cable, insufficient power, or a Powered Device (PD).
Information for the Network Engineer to investigate potential switch configuration or malfunctions.
PoE Switch Verification – Determine if a switch port can provide enough power by reporting PoE class (0-8).
Powered Pairs – Graphically identifies powered pairs. Including Dual Signature where the switch port delivers power on 2 or 4 pairs (802.3bt or PoE ++)
PoE Injector verification - Display injector voltage level
Active Switch Detection - Determine if a cable is connected to a switch port and port speed up to 10G
Cable Testing – Identify any shorted, open or crossed wires at both ends, length of each pair, and send tones to find cables.





MicroScanner Series Features:
Straightforward Interface – Graphical wiremap, length, cable ID, and distance to fault displayed on one screen
Multimedia Support – Tests all common media types including RJ11, RJ45, Coax(MS2 only), with no need for adapters
IntelliTone Toning – Trace virtually any cable or wire pair with IntelliTone digital and analog toning
VDV Service Detection – Verifies today’s media services, including 10/100/1000 Ethernet, POTS, and PoE
Oversized Display – Large, backlit LCD makes results crystal clear whether in bright sunshine or a dark closet
Magnetic Strap (included in MicroScanner kits) - Allows technicians to keep their hands free and their tester safe from potential drops and accidents with strong rare earth magnet

Rule out service problems fast

Today’s communications technicians have a lot more problems to deal with than just the cabling. They have to rule out a whole host of potential cable and service issues before determining the cause of a connection problem.

The MicroScanner Cable Verifier series is equipped to answer the question to reduce time troubleshooting. Is there telephone voltage? What’s the polarity? Is there an Ethernet switch at the far end? Is PoE available? If PoE is available, is it enough to run my device? The MicroScanner Series acknowledges this, giving technicians the vision to verify today’s most common voice, data, and video services. That means faster, more comprehensive troubleshooting.


Comparison Chart   MicroScanner2 MicroScanner PoE Twisted Pair (RJ-11, RJ-45) Wiremap • • Length / Distance to Fault • • Coaxial Length / Distance to Fault •   Service Identification Reports Maximum Power Class   • 10/100/1000BASE-T • • 2.5GBASE-T, 5GBASE-T, 10GBASE-T   • Power Over Ethernet 802.3af 802.3af, 802.3at, 802.3bt Analog and Digital Toning • • Optional Remote Identifiers • •

PoE Verification

MicroScanner PoE cuts through the confusion of your PoE installation by providing swift and simple PoE verification. The tester detects the available PoE class (0-8) provided by the connected switch in accordance to the latest PoE standards and displays the voltage from passive PoE sources. This information keeps the technician informed on the installations capabilities and improves their work flow and reduces the time spent waiting for information about the connected switch.


Revolutionary Interface

Yesterday's cable verification testers force users to toggle between up to four different modes of operation to view all test results.  This not only slows the test process, but also causes frustration and leads to high user error rates.  MicroScanner has defeated this convention by displaying key test results – wiremap, pair lengths, distance to fault, cable ID, and far end device – all on one screen.  Plus it features an oversized, backlit LCD screen with the power to display wiremap results graphically, which brings unprecedented comfort and clarity to the user experience.


Multimedia Support

Tired of losing or breaking all the adapters needed for testing the various voice, data, and video media types?  MicroScanner makes these awkward adapters things of the past with built-in RJ11, RJ45, and coax support.  Both the main unit and the far-end identifiers can be used to test telephone jacks, Ethernet jacks, and CATV outlets right out of the box.  Just one more way MicroScanner2 streamlines cable verification.


IntelliTone Toning

MicroScanner features built-in IntelliTone digital and analog toning to precisely locate virtually any cable or wire pair, regardless of work environment.  Use digital mode to locate high-grade data cabling (Cat 5e/6/6a) in bundles, or at switches, patch panels, or wall outlets.  Digital mode especially performs in environments with high data, RF, or electromagnetic interference.  When coupled with the IntelliTone 200 Pro Probe, it can also be used to verify cable wiremap from either the tester end or the probe end. 

Use analog mode on voice-grade cabling (Cat 3 and below), as well as coax, security/alarm, and speaker wiring.  These cables are optimized for lower frequency transmissions, and therefore are more easily isolated with a low-frequency tone.  MicroScanner2’s smart analog tone eliminates frustrating guesswork locating individual wire pairs during installations by changing songs each time the pair under test is shorted together.  This provides technicians a decisive way to identify individual wire pairs before punching them down or when diagnosing voice transmission problems.


VDV Service Detection

Voice, data, video technicians have a lot more problems to deal with than just the cabling.  They have to rule out a whole host of potential cable and service issues before determining the cause of a connection problem.  MicroScanner acknowledges this, giving technicians high power vision to detect today’s most common service problems.   Detect the presence of POTS voltage and verify polarity.  Verify powered 10/100/1000 Ethernet switches at the far end.  Or, confirm proper PoE voltage and pairs.


Rugged Housing

With all the abuse you put your tools through, you can’t afford for them to be delicate. MicroScanner features a rubber wrap-around holster that makes it the right tool for even the toughest jobs. Toss it into your toolbox. It can handle it. Plus, it now comes standard with a vinyl carry pouch for enhanced protection and convenience.

Replacement Microscanner PoE Wiremap Adapter.

Replacement wiremap adapter for MicroScanner™ PoE Cable Verifier

Remote adapter tests copper cabling

With F-Connector and 8-Pin Modular Jack

Doubles as a protective cap for the cable verifier

Remote ID kit for use with LinkIQ and Microscanner PoE.

Remote ID kit for use with the MicroScanner™ PoE Cable Verifier

Far-end identifiers #2-7

Test telephone jacks, Ethernet jacks and CATV outlets