Fluke Networks LinkIQ Accessories

The Fluke FMC-10G Fiber Media Converter Kit gives network technicians a practical way to connect LinkIQ testers directly to fiber-based networks for faster diagnostics and visibility. Designed for both 1 Gigabit and 10 Gigabit environments, the kit supports fiber troubleshooting, switch identification, VLAN discovery, and connectivity checks across modern network infrastructure. With included media converters, SFP modules, patch cords, and cleaning accessories, the FMC-10G kit provides everything needed for testing fiber-connected devices in data centres, commercial installations, and structured cabling environments.

Key Features of Fluke FMC-10G Connects to 1 Gb/s (1000BASE-SX, 1000BASE-LX) and 10 Gb/s (10GBASE-SR, 10GBASE-LR) fiber Ethernet ports through a media converter and SFP (1G/10G) using single-mode or multimode optic fiber cables
Compatible with LinkIQ Cable+Network Tester and LinkIQ Duo Cable+Wi-Fi+Network Tester
Fiber optic network testing features including: IPv4 and v6 ping, nearest switch diagnostics (IP address, name, port / VLAN number)
Battery bank for portable operation
Built for High-Speed Fiber Networks The FMC-10G kit supports both 1 Gigabit and 10 Gigabit fiber connections, making it suitable for modern network infrastructure where copper-only testing is not enough. Technicians can connect directly to fiber switch ports for improved visibility during troubleshooting and installation work.

Supports Faster Troubleshooting When paired with a LinkIQ tester, the FMC-10G kit helps identify switch information, advertised network speeds, VLAN configuration details, and connectivity status. This allows installers and IT teams to locate issues more efficiently across fiber-connected infrastructure.

Suitable for Mixed Fiber Environments The supplied SFP modules support both multimode and single-mode fiber applications, allowing the kit to work across different network environments. This flexibility makes it useful for campus networks, commercial buildings, server rooms, and data centre deployments.

What's Included:

A single carrying case for LinkIQ/ LinkIQ Duo tester, media converters (1G or/and 10G), battery pack, fiber optic patch cords (single-mode and multimode), RJ45 connector cable, SFPs (single-mode and multimode) and accessories

The Fluke FMC-1G 1G Fiber Media Converter Kit for LinkIQ is designed to bridge LinkIQ testers into 1 Gb/s fiber environments. It allows field technicians to work directly with active fiber links and gather switch-level information while maintaining a simple and portable setup. The kit is built for practical deployment in environments where fiber connectivity needs quick validation and network visibility without complex tooling.

Key Features of Fluke FMC-1G Supports connection to 1 Gb/s fiber Ethernet networks (1000BASE-SX and 1000BASE-LX)
Works with LinkIQ Cable+Network Tester and LinkIQ Duo systems
Provides switch-level visibility including port details, VLAN data, and advertised speed
Enables IP ping testing across fiber connections
Includes SFP modules for both single-mode and multimode fiber
Portable design with external power source for field use
Supports troubleshooting of active fiber links in live network environments
Fiber Network Access This kit allows direct interaction with active fiber infrastructure, giving technicians access to live network information through the LinkIQ interface. It is intended for verifying connectivity and identifying switch port details rather than performing full fiber certification.

Field Deployment Use Built for on-site work, the FMC-1G kit is structured to support quick setup in data centres, enterprise wiring closets, and remote installations. Its compact format helps reduce downtime when tracing or validating fiber links.

Network Visibility When paired with a LinkIQ tester, the kit provides visibility into connected switch properties such as port configuration, negotiated link speed, and VLAN assignment, helping technicians confirm correct network routing and configuration.

What's Included:

1 Gb/s Fiber Media Converter, Power bank, cable for charging bank and powering converters, SFPs (1000BASE-LX, 1000BASE-SX), single-mode and multi-mode fiber cords, RJ-45 cable, and a carrying case.

A field-ready network testing kit designed for mixed copper, fiber, and wireless environments, combining LinkIQ Duo diagnostics with fiber interfacing and remote identification tools. It supports technicians working across structured cabling systems, allowing quick checks of link performance, switch negotiation data, and fiber continuity without switching between multiple instruments. The included fiber media converter expands testing reach into optical links, while the probe and ID set streamline cable tracing and endpoint verification in active installations.

Key Features of Fluke LIQ-DUO-KIT-FMC-H6UK Tests Ethernet links up to 10GBASE-T with frequency-based qualification
Identifies network switch details such as port, VLAN, and advertised speed
Performs ping testing for IPv4 and IPv6 connectivity validation
Supports Wi-Fi analysis across modern wireless environments
Includes fiber media converter for interfacing with optical network links
Works with remote IDs to simplify cable mapping and tracing
Detects common cable faults including wiring issues and break points
Combines copper, fiber, and wireless checks in one portable kit
Copper cable qualification up to 10G Ethernet links
Wi-Fi analysis for wireless environment visibility
Switch detection including port details, VLAN, and speed negotiation
Built-in ping testing for IPv4 and IPv6 connectivity checks
Integrated fiber media converter support for single-mode and multimode links
Remote ID set for fast cable identification in dense installations
Cable fault detection including opens, shorts, split pairs, and distance-to-fault
Portable kit format for mixed copper, fiber, and wireless
Cable Testing You Trust The LinkIQ tester is capable of measuring lengths up to 305 meters (1000 feet) and provides distance to faults such as opens, shorts, and unterminated cable. Using the remote ID allows for a complete wire map of the cable pairs which helps identify miswired and split pairs. The primary cable testing feature of LinkIQ tester is the cable performance test which qualifies the cabling bandwidth from 10BASE-T to 10GBASE-T (10 Mb/s up to 10 Gb/s). It performs these tests via frequency-based measurements. Using IEEE-standardsbased measurements ensures that tested links meet performance requirements as opposed to transmission testers which only prove that the specific test devices can communicate over the link. Operators may set performance requirements from 10 Mb/s to 10 Gb/s for a simple pass/fail indication.

Network Testing You Need Along with the robust cable testing features, the LinkIQ tester also provides detailed information on the nearest connected switch and connectivity testing with IP ping. The LinkIQ tester negotiates with the switch to identify the advertised data rate (up to 10GBASET), half/full duplex identification, the switch name and IP address, port number, and VLAN info.

Switch port test shows switch name and IP address, connected port, and VLAN (separate screen) along with advertised speed and duplex settings. If a ping test is configured, the target address and average response time are shown. Scroll down to show Power over Ethernet results. The ping test verifies connectivity to devices on the local network or the internet and supports both IPv4 and v6. The address of the LinkIQ tester may be set up manually or through DHCP. Once set, the ping test runs as part of the Autotest when a switch is detected. Results of the ping test include identification and response time of each of four pings to the target, the DNS server, and gateway.

In-Depth PoE Testing While Power over Ethernet makes installation of devices such as security cameras and access points simpler, a survey by the Ethernet Alliance of over 800 installers, integrators, and end users found that four of five respondents experienced difficulties in integrating PoE systems. Part of this can be traced to the fact that the IEEE offers three PoE standards, the term PoE is not registered, and there are a variety of non-standards-compliant implementations.

To simplify PoE installation and troubleshooting, the LinkIQ tester shows the pairs where power is provided, including the different power levels and pairs for dual-signature implementations. Further, the LinkIQ tester will actually place a load on the connection to ensure that the advertised power is actually being delivered by the switch across the cabling infrastructure. The LinkIQ tester has been certified by the Ethernet Alliance to IEEE802.3™ standards for reliable multivendor interoperability.

LinkWare™ PC Documentation The LinkIQ tester provides complete documentation abilities for the tests it performs. Up to 1,000 results can be given descriptive names and stored and recalled in the tester. Test names and numbers automatically increment as each is saved: Annex B-1, Annex B-2, Annex B-3, etc. which saves time when testing cables in sequence. Report data may be exported to a PC for documentation purposes. The LinkIQ tester uses LinkWare™ PC, Fluke Networks’ reporting software which supports a variety of testers going back 20 years and is the industry’s leading reporting solution with tens of thousands of active users. LinkWare PC can be used to store the results as well as generate PDF reports.

Application Scope Commonly used in structured cabling installation, maintenance of enterprise networks, and troubleshooting mixed infrastructure environments where both copper and fiber links must be validated alongside wireless performance checks.

Fiber Integration Role The included fiber media converter allows direct interaction with optical links, enabling verification of connectivity and performance across single-mode and multimode fiber without requiring separate dedicated fiber test equipment.

Identification and Troubleshooting Tools Remote ID modules and the IntelliTone probe provide fast cable identification and tracing in dense installations. These tools assist in locating endpoints, confirming cable runs, and reducing time spent on fault isolation during installation or maintenance work.

What's Included

LinkIQ Duo Cable + Wi-Fi + Network Tester unit
Fiber Media Converter Kit (1G/10G FMC module system)
Remote ID set for cable identification (IDs #1–#7)
IntelliTone Pro 200 tone probe for cable tracing
1.25 mm quick fiber cleaner
Cat6A RJ45 patch cord
RJ45 to RJ11 modular adapter
USB-C charging and data cable
Power and charging cables for media converter system
Single-mode and multimode fiber patch leads (kit dependent)
SFP modules for 1G and 10G fibre testing (bundle dependent)
Hanging strap with Remote ID holder
Protective carry case for transport and storage
Quick reference documentation

The Fluke LIQ-KIT-FMC is a combined copper and fiber network testing kit designed for field technicians working across mixed infrastructure environments. It brings together LinkIQ cable testing, switch validation, remote identification tools, and a fiber media converter setup to support diagnostics across Ethernet and fiber links in one portable package.

Key Features of Fluke LIQ-KIT-FMC Tests copper cabling for Ethernet performance up to 10G
Validates switch information including port details, speed, and VLAN data
Built-in ping testing for IPv4 and IPv6 connectivity checks
Remote ID system for fast identification of cable runs
IntelliTone probe support for cable tracing and locating
Fiber Media Converter support for 1G and 10G SFP-based links
Assists in verifying fiber link connectivity across single-mode and multimode networks
Cable Testing You Trust The LinkIQ tester is capable of measuring lengths up to 305 meters (1000 feet) and provides distance to faults such as opens, shorts, and unterminated cable. Using the remote ID allows for a complete wire map of the cable pairs which helps identify miswired and split pairs. The primary cable testing feature of LinkIQ tester is the cable performance test which qualifies the cabling bandwidth from 10BASE-T to 10GBASE-T (10 Mb/s up to 10 Gb/s). It performs these tests via frequency-based measurements. Using IEEE-standardsbased measurements ensures that tested links meet performance requirements as opposed to transmission testers which only prove that the specific test devices can communicate over the link. Operators may set performance requirements from 10 Mb/s to 10 Gb/s for a simple pass/fail indication.

Network Testing You Need Along with the robust cable testing features, the LinkIQ tester also provides detailed information on the nearest connected switch and connectivity testing with IP ping. The LinkIQ tester negotiates with the switch to identify the advertised data rate (up to 10GBASET), half/full duplex identification, the switch name and IP address, port number, and VLAN info.

Switch port test shows switch name and IP address, connected port, and VLAN (separate screen) along with advertised speed and duplex settings. If a ping test is configured, the target address and average response time are shown. Scroll down to show Power over Ethernet results. The ping test verifies connectivity to devices on the local network or the internet and supports both IPv4 and v6. The address of the LinkIQ tester may be set up manually or through DHCP. Once set, the ping test runs as part of the Autotest when a switch is detected. Results of the ping test include identification and response time of each of four pings to the target, the DNS server, and gateway.

In-Depth PoE Testing While Power over Ethernet makes installation of devices such as security cameras and access points simpler, a survey by the Ethernet Alliance of over 800 installers, integrators, and end users found that four of five respondents experienced difficulties in integrating PoE systems. Part of this can be traced to the fact that the IEEE offers three PoE standards, the term PoE is not registered, and there are a variety of non-standards-compliant implementations.

To simplify PoE installation and troubleshooting, the LinkIQ tester shows the pairs where power is provided, including the different power levels and pairs for dual-signature implementations. Further, the LinkIQ tester will actually place a load on the connection to ensure that the advertised power is actually being delivered by the switch across the cabling infrastructure. The LinkIQ tester has been certified by the Ethernet Alliance to IEEE802.3™ standards for reliable multivendor interoperability.

LinkWare™ PC Documentation The LinkIQ tester provides complete documentation abilities for the tests it performs. Up to 1,000 results can be given descriptive names and stored and recalled in the tester. Test names and numbers automatically increment as each is saved: Annex B-1, Annex B-2, Annex B-3, etc. which saves time when testing cables in sequence. Report data may be exported to a PC for documentation purposes. The LinkIQ tester uses LinkWare™ PC, Fluke Networks’ reporting software which supports a variety of testers going back 20 years and is the industry’s leading reporting solution with tens of thousands of active users. LinkWare PC can be used to store the results as well as generate PDF reports.

Network Testing Capability This kit supports a wide range of copper diagnostics including cable length measurement, fault detection such as opens or shorts, and identification of wiring issues. It also communicates with network switches to retrieve live configuration data, helping confirm how each port is operating in real time.

Fiber Integration Support With the included fiber media converter module, the kit extends testing into fiber environments using SFP interfaces. This allows technicians to verify connectivity and link status between fiber segments and network switches without requiring separate standalone fiber testers.

Field Application Use The kit is suited for structured cabling environments where both copper and fiber links are present. It is commonly used during installation checks, fault isolation, and routine maintenance across data networks, helping technicians confirm link integrity across multiple media types.

The Fluke LIQ-KIT-FMC includes:

LinkIQ Cable + Network Tester
RJ45-RJ45 Patch Cord
AC Charger
RJ45/11 Universal Coupler
IntelliTone Probe
Duffle Bag Carrying Case
Test Kit Pouch
10 Gb/s Fiber Media Converter
1 Gb/s Fiber Media Converter
Power Bank
Cable for Charging Bank and Powering Converters
4 SFPs (1000BASE-LX, 1000BASE-SX, 10GBASE-LR, 10GBASE-SR)
Single-Mode Fiber Cord
Multi-Mode Fiber Cord
RJ-45 Cable
Carrying Case
FiberLert Live Fiber Detector
1.25 mm Quick Clean Cleaner