Fluke Networks LinkIQ Network Testers and Kits

Cable testing you trust. Network testing you need.

The LinkIQ™ Network & Cable Tester is designed to provide trusted cable testing along with network testing professionals need to do their jobs. LinkIQ™ validates cable performance (up to 10 Gig) using frequency-based measurements and provides distance to fault information along with a wire map of the cable under test.

The LinkIQ™ also performs nearest switch diagnostics to identify key network issues and validate switch configuration eliminating the need of using another device. Additional features include, Analog and Digital Toning, Port Blink, Remote Office Locators, and the ability to manage results via LinkWare™ PC.

The LinkIQ™ Network & Cable Tester includes: LinkIQ Tester with remote ID #1, RJ45-RJ45 patch cord, AC charger, RJ45/11 universal coupler, and carrying case.

Product Highlights

Measure network capacity up to 10 Gig via frequency based measurements
Troubleshoot active networks by providing connected switch information (Switch Name, Port Number, and VLAN info)
Install and troubleshoot PoE devices via Switch Negotiation and PoE Load test
Graphical wiremap and length test to identify common faults that occur with cabling installation
Document work through LinkWare™ PC reporting
Supports Industrial Ethernet (EtherNet/IP, PROFINET, EtherCAT, and others)
Industrial Ethernet Kit supports Industrial Connectors (M8D, M12D, M12X)
Network Testing You Need

Along with the robust cable testing features, the LinkIQ™ also provides detailed information on the nearest connected switch. The LinkIQ™ negotiates with the switch to identify the advertised data rate (up to 10GBASE-T), half/full duplex identification, the switch name, port number, and VLAN info.

LinkIQ™ Feature Breakout





RJ45 Port
PASS/FAIL frequency-based measurement results
Touch Screen Color Display
Length measurement shows distance to termination, open or short
Wiremap shows type and location of fault (miswires, split pairs, shorts, breaks)
USB-C port for data export, software updates and charging
Cable “Speedometer” provides bandwidth information up to 10G
Save up to 1000 test results on the unit and export to LinkWare™ PC


Additional Features

Generates Analog or Digital tones compatible with the IntelliTone™ Probe or Pro3000™ to assist in locating cables in a wall or telecommunications room
Blink Port light on switch to help identify the connected switch port
Compatible with MicroScanner™ PoE Remote Identifiers for Ethernet outlet identification
Touch Sensitive gesture-based display
Rechargeable Li-Ion battery
Easy Feature and Network Testing Upgrades via USB-C via LinkWare™ PC
Charging via standard USB-C port



Note: If your unit does not have LinkIQ v1.1 automatically installed, this can be upgraded free of charge by visiting: https://www.flukenetworks.com/support/downloads

Cable testing you trust. Network testing you need.

The LinkIQ™ Network & Cable Tester is designed to provide trusted cable testing along with network testing professionals need to do their jobs. LinkIQ™ validates cable performance (up to 10 Gig) using frequency-based measurements and provides distance to fault information along with a wire map of the cable under test.

The LinkIQ™ also performs nearest switch diagnostics to identify key network issues and validate switch configuration eliminating the need of using another device. Additional features include, Analog and Digital Toning, Port Blink, Remote Office Locators, and the ability to manage results via LinkWare™ PC.

The LinkIQ™ Network & Cable Tester includes: LinkIQ Tester with remote IDs #1-7, RJ45-RJ45 patch cord, AC charger, RJ45/11 universal coupler, Intellitone Pro 200 probe and duffle bag carrying case.

Product Highlights

Measure network capacity up to 10 Gig via frequency based measurements
Troubleshoot active networks by providing connected switch information (Switch Name, Port Number, and VLAN info)
Install and troubleshoot PoE devices via Switch Negotiation and PoE Load test
Graphical wiremap and length test to identify common faults that occur with cabling installation
Document work through LinkWare™ PC reporting
Supports Industrial Ethernet (EtherNet/IP, PROFINET, EtherCAT, and others)
Industrial Ethernet Kit supports Industrial Connectors (M8D, M12D, M12X)
Network Testing You Need

Along with the robust cable testing features, the LinkIQ™ also provides detailed information on the nearest connected switch. The LinkIQ™ negotiates with the switch to identify the advertised data rate (up to 10GBASE-T), half/full duplex identification, the switch name, port number, and VLAN info.

LinkIQ™ Feature Breakout





RJ45 Port
PASS/FAIL frequency-based measurement results
Touch Screen Color Display
Length measurement shows distance to termination, open or short
Wiremap shows type and location of fault (miswires, split pairs, shorts, breaks)
USB-C port for data export, software updates and charging
Cable “Speedometer” provides bandwidth information up to 10G
Save up to 1000 test results on the unit and export to LinkWare™ PC






Additional Features

Generates Analog or Digital tones compatible with the IntelliTone™ Probe or Pro3000™ to assist in locating cables in a wall or telecommunications room
Blink Port light on switch to help identify the connected switch port
Compatible with MicroScanner™ PoE Remote Identifiers for Ethernet outlet identification
Touch Sensitive gesture-based display
Rechargeable Li-Ion battery
Easy Feature and Network Testing Upgrades via USB-C via LinkWare™ PC
Charging via standard USB-C port

Remote ID kit for use with LinkIQ and Microscanner PoE.