48 Port Smart Switches

Control and Configure Beyond Plug-and-Play Connectivity

The NETGEAR Smart Managed Plus 48 port Gigabit Switch provides fundamental network features that will help optimise the performance of business networks. On top of the plug-n-play Gigabit Ethernet connectivity, these switches also offer essential networking features such as VLAN, QoS, IGMP Snooping, Link Aggregation / Port Trunking, rate limiting and traffic monitoring.. NETGEAR Smart Managed Plus Switches are an exceptional value for businesses looking to add intelligence to their network beyond what unmanaged switches can provide.

Features

Use as a plug-and-play switch or use the configuration utility for simple setup
48 ports deliver up to 2000 Mbps bi-directional bandwidth on each port
Quality of Service (QoS) for prioritising network traffic
Virtual LAN (VLAN) support for network segmentation and security
Troubleshoot connection problem via cable test
Bandwidth management to avoid network congestions
Network traffic monitoring
Port mirroring
Broadcast storm control


NETGEAR Green

Up to 60% lower power consumption
Auto power-down mode conserves energy when a port is not connected
Less transmit power when the cable is short (under 10m)
Packaging manufactured with at least 80% recycled material
Package Contents
48 Port ProSAFE® Gigabit Plus Switch
Quick Install Guide
Resource CD with PC Utility software
Power cord

Build a Reliable, Easy-to-Use Basic Business Network at an Affordable Price

In today's hyper connected world, reliable access to network resources is critical to all businesses. However, you also need to invest wisely to stay competitive, knowing how to separate the essential from the extraneous and get the most value for your money. For investment in network infrastructure, building a solid foundation for your business is essential, but it doesn’t mean you need the most advanced feature set on the market.

Specifications at a Glance

48-port 10/100/1000 Mbps switch with 2-Gigabit combo uplinks
Internal Power Supply
With a Cisco SG250-50 Smart Switch, you can achieve business-class network performance and security without paying for advanced network management features that you will not use. When you need a reliable solution to share online resources and connect computers, phones, and wireless access points, but low cost is a top priority, Cisco 250 Series Smart Switches provide the ideal solution.



The Cisco SG250-50, part of the 250 series, is the next generation of affordable smart switches that combine powerful network performance and reliability with the essential network management features you need for a solid business network. These expandable Gigabit Ethernet switches provide basic management, security, and quality-of-service (QoS) features beyond those of an unmanaged or consumer-grade switch, at a lower cost than managed switches. And with an easy-to-use web user interface andAuto Smartports, you can deploy and configure a complete business network in minutes. Features and Capabilities

Powerful capabilities
In addition to basic management, security, and quality of service (QoS), these switches also support capabilities such as Multiple Spanning Tree (MSTP)
Easy setup and management
Cisco's intuitive, browser-based user interface is now even more user-friendly, with simple mode and a configuration wizard for common configurations. The switches also come with a USB port for easier file management.
Performance and reliability
The 250 Series is designed and tested to deliver the high performance and reliability you would expect from Cisco switches, so you can enjoy speedy file transfers and keep vital business applications available.
Energy efficiency
Rich energy-saving features are embedded across the portfolio, including energy-detect, cable length detection, and Energy Efficient Ethernet (EEE). All these provide an eco-friendly and cost-effective solution without compromising performance.
Peace of mind
All switches come with a limited lifetime warranty and include one year of technical support and free software fixes for the term of the warranty.
New simplified web GUI and configuration wizards for most intuitive management
Cisco® Smart Network Application (SNA) for network-level management
Cisco FindIT Network Manager
Cisco Network Plug and Play (PnP)
Cisco Active Advisor for inventory, advisory, and life-cycle management
New USB port added for easy image and configuration transfer




Reliable SMB network foundation



Switch Comparison

SF250-48 SF250-48HP SG250-50 SG250-50HP SG250-50P Form Factor Rackmount Rackmount Rackmount Rackmount Rackmount Ports 48 x 10/100, 2 x Gigabit SFP/RJ-45, 2 x Gigabit SFP 48 x 10/100/1000, 2 x Gigabit SFP/RJ-45 Number of PoE+ Ports  - 48 - 48 48 Power Dedicated to PoE  - 195 watts - 192 watts 375 watts Features Layer 2 switching, Layer 3 switching, DHCP support, BOOTP support, VLAN support, IGMP snooping, Syslog support, port mirroring, DiffServ support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, SNTP support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP), Multiple Spanning Tree (MSTP), Trivial File Transfer Protocol (TFTP) support, access control list (ACL) support, quality of service (QoS), jumbo frames support, MLD snooping, SNMP, RMON, SNTP, Cisco Discovery Protocol, Auto SmartPorts Status indicators System, link/speed per port System, link/speed per port System, link/speed per port System, link/speed per port System, link/speed per port Jumbo frame support Performance 17.6-Gbps switching capacity, 13.1-Mpps forwarding performance (64-byte packet size) 100-Gbps switching capacity, 74.41-Mpps forwarding performance (64-byte packet size) Power Supply 1 internal Fanless - - - - Physical Specifications 440(w) x 44(h) x 257(d)mm 440(w) x 44(h) x 350(d)mm 440(w) x 44(h) x 257(d)mm 440(w) x 44(h) x 350(d)mm 440(w) x 44(h) x 350(d)mm   Buy Buy Buy Buy Buy

The NETGEAR® S350 Series 48-port Gigabit Ethernet Smart Managed Pro Switch with 4 SFP Ports provides Layer 2 features to ensure a reliable and secured network for SMB customers to deploy applications like VoIP, video and IP surveillance. The new cost-effective S350 series includes advanced features, such as QoS, VLAN, ACL, LACP link aggregation, SNMP, IGMP Multicast and Spanning Tree. All S350 models are backed by NETGEAR ProSAFE Lifetime Hardware Warranty with Next Business Day replacement, 90-day free 24/7 phone support and lifetime online chat support.

Highlights:

Flexible and cost-effective solution for SMB data, voice and video converged network 48 Gigabit 10/100/1000BASE-T RJ- 45 ports
4 Dedicated SFP fibre ports
Non-blocking switching with 104Gbps line rate fabric
Smart IT, not Big IT Easy-to-use Web browser-based management GUI
Manageable through Smart Control Center, a powerful tool for multi-switch discovery, deployment, monitoring and firmware upgrade
Network Management System (NMS300), allowing all NETGEAR business products to be deployed and managed through this single interface
Dual firmware images, improving reliability and uptime to your network
Worry-free ProSAFE Limited Lifetime Warranty*, online technical chat support and Next Business Day (NBD) replacement.
Powerful Connectivity and Security Features Advanced VLAN support for better network segmentation
L2/L3/L4 Access control lists (ACLs) for granular network access control including 802.1x port authentication
QoS (Quality of Service) for traffic prioritisation including port-based, 802.1p and L2/L3/L4 DSCP-based
Auto “denial-of-service” (DoS) prevention
IGMP Snooping and Querier for multicast optimisation
Rate limiting and priority queuing for better bandwidth allocation
Port mirroring for network monitoring
Energy Efficient Ethernet (IEEE 802.3az) for maximum power savings
Cable test to troubleshoot connection issues
SNMP v1, v2c, v3 and RMON remote monitoring
Need Fibre Connectivity?

AGM731F

Fibre Gigabit 1000Base-SX (LC) SFP Module

The Zyxel GS1900-48 forty eight port GbE Smart Managed Switch with Gigabit speed and essential managing functions bring your business network more flexibility and connectivity. The GS1900-48 provides a GbE switch with power-saving functions and full IPv6 support to ensure your network is ready for future expansions. Designed with useful features and advanced performances that empower your networks with speed and security as well as silent operation in your office environments. Features:

Forty eight 10/100/1000 Mbps GbE ports
Two Gigabit SFP Slots
Easy browser-based switch management
Quick and easy set up wizard
Advanced network error prevention features
Green Ethernet IEEE 802.3az support and intelligent ZyXEL green features


Zyxel One Network experience

Aiming for relieving our customers from repetitive operations of deploying and managing a network, Zyxel One Network is designed to simplify the configuration, management, and troubleshooting, allowing our customers to focus on the business priorities. Zyxel One Network presents an easy-to-use tool, Zyxel One Network Utility (ZON Utility), to realize speed network setup. Zyxel Smart Connect*2 allows Zyxel networking equipment to be aware and recognise each other and further facilitating the network maintenance via one-click remote functions such as factory reset or power cycling. Zyxel One Network redefines the network integration across multiple networking products from switch to Wi-Fi AP and to Gateway.



Simple, intuitive wizard set up

For small businesses that want to manage their infrastructure in advance, the Zyxel GS1900 Series comes with a friendly built-in Web-based browser for simple configuration and management. Moreover, the friendly step-by-step intuitive wizard helps avoiding multiple complicated configuration pages for quick set up with few clicks in the matter of minutes. To guide the users from start-up, VLAN, Guest VLAN to QoS setting, the Zyxel Series offers four most common steps and combines them into a quick and easy setup wizard; which does not just save deployment time and efforts, but is also helpful especially for the non-IT staff.

Highlights:

Easy browser-based switch management, with quick and easy set up wizard
Advanced network error prevention features (loop protection, dual images, storm control, DoS and SSL)
Fanless design
Green Ethernet IEEE 802.3az support and intelligent Zyxel green features
Inactive link detection
Cable length detection 
Avoiding network errors with easy management

The Zyxel GS1900 Series is equipped with advanced management features to make the network stable and secure: loop protection that prevents network flooding, dual images to provide a backup FW if one crashes and storm control to ensure network efficiency, friendly on/off DoS with simple click to enable/disable instead of several setup pages, while SSL ensures the management frames are well encrypted when the device is accessed. The GS1900 Series provides network error prevention features and integrated network security for reduced risk and improved data streaming. 

Energy saving for IEEE 802.3az

As operating overheads such as electric bills increase constantly due to the arising green awareness, businesses have to avoid unnecessary energy waste. The built-in IEEE 802.3az Energy Efficient Ethernet (EEE) and more Zyxel innovative green features of Zyxel GS1900 Series can reduce energy consumption of Ethernet devices through multiple intelligent ways.


Traffic detection—Energy Efficient Ethernet (EEE) compliance The IEEE 802.3az Energy Efficient Ethernet (EEE) feature automatically detects network traffic and adjusts power consumption dynamically, as such the switch can reduce power consumption during low link utilization periods.
Inactive link detection The inactive link detection function automatically reduces power usage when inactive links or devices are detected. The Zyxel GS1900 Series can adjust power consumption according to the link status and number of the active network devices..
Cable length detection This green feature enables the switch to automatically detect the length of connected Ethernet cables and adjust power usage accordingly. The shorter the cable length, the less power it consumes.

The Cisco SF220-48 is a 48 Port 10/100 Smart Plus Switch with 2 Gigabit Combo Ports (RJ45 + SFP), is an affordable smart switch equipped with enhanced security, intelligence and performance. For small and medium-sized businesses running on a tight budget but still requiring a solid network, these switches deliver an excellent combination of features, performance and ease of use to build a fast, reliable and highly secure network - at a lower price than managed switches.

Cisco 220 Series: Solid Business Network at an Affordable Price
Enjoy a higher level of management, security and scalability without the cost complexity of a managed switch

Cisco Small Business 220 Series Smart Plus Switches bridge the gap between managed and smart switches to offer customers the best of both worlds. Combining powerful performance with reliability, they provide the higher levels of security, management, and scalability you expect from managed switches, affordably priced like smart switches.

Choose the Cisco SF220-48 for:

48 Fast Ethernet 10/100 Ports with 2 Gigabit Ethernet Combo Ports (RJ45/SFP)
Support: with Cisco Small Business Support Service and a limited lifetime warranty.
Value: Enjoy the affordability of smart switches while getting the higher levels of security, management and scalability only found in managed switches.
Enhanced security: Cisco switches offer several security capabilities, including advanced threat defense, access control lists (ACLs), 802.1x, and many others. You can be confident that you have the protection you need.
Easy setup and management: Intuitive browser–based tools simplify setup and configuration. Advanced command line interface (CLI) management options are also available.
The SF220-48 is easy to manage and fan-less for quiet operation.
Business Applications

With Cisco 220 Series Switches, you can not only build an efficient and reliable network to connect the workforce, but also advanced solutions to deliver data, voice, and video services on a converged infrastructure. Get the best value for your money by improving the productivity of employees. Possible deployment scenarios include:

Secured desktop connectivity Cisco 220 Series Switches can quickly and reliably connect employees working in small offices with each other and with all of the servers, printers, and other devices they use. With device authentication and access control, you can maintain the integrity of key business information while keeping you employees connected and productive.
Flexible wireless connectivity. With comprehensive security and quality of service (QoS) capabilities, Cisco 220 Series Switches provide a solid foundation to add business-grade wireless to the network. You can easily move up to a cutting-edge 802.11ac wireless access point to increase workforce productivity without worrying about power and throughput.
Unified communications. The Cisco 220 Series Switches provide QoS features to automatically prioritize delay-sensitive traffic to help you easily deploy an IP-based communication solution on a converged network. Cisco offers a complete portfolio of IP telephony and other unified communications products designed for small businesses. Cisco 220 Series Switches have been rigorously tested to help ensure easy integration and full compatibility with these and other vendor products.
Raising the Bar for Smart Switches

Smart switches are typically priced low but are limited in functionality and scalability. Cisco 220 Series Smart Plus Switches raise the bar for the smart switches by providing additional features and enhancements, including: A higher level of security and intelligence.

ACLs and flow-based QoS give you more control over network performance, maintain the integrity of key business information, and can enable higher network efficiency. Simple and flexible management.

Cisco 220 Series Switches are easy to deploy and use, not only for small, self-installed deployment by non-IT professionals, but also for mid-scale deployment by IT engineers. These switches provide more management options like Cisco CLI, Simple Network Management Protocol (SNMP), Cisco Prime™ LAN Management System (LMS) integration, besides the intuitive, web-based interface and Cisco FindIT utility. Switch Comparison

SF220-48 SF220-48P SG220-50 SG220-50P Form Factor Desktop, Rackmount Desktop, Rackmount Desktop, Rackmount Desktop, Rackmount Ports 48 x 10/100 + 2 x combo Gigabit SFP 48 x 10/100/1000 + 2 x combo Gigabit SFP Number of PoE Ports   48   48 Power Dedicated to PoE   375 watts   375 watts Features Layer 2 switching, DHCP support, BOOTP support, VLAN support, IGMP snooping, IGMP Querier, Syslog support, DoS attack prevention, port mirroring, DiffServ support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, IPv6 support, SNTP support, STP support, RSTP, MSTP, TFTP support, HTTPS, QoS, acces control list, QinQ VLAN, guest VLAN, auto voice VLAN, GVRP/GARP, BPDU Guard, SSH, SSL, Jumbo Frames support, MLD snooping, SNMP, RMON, SNTP, Cisco Discovery Protocol Status indicators Link activity, port transmission speed, system Link activity, port transmission speed, system, PoE Link activity, port transmission speed, system Link activity, port transmission speed, system, PoE Jumbo frame support 9KB 9KB 9KB 9KB Performance Switching capacity : 10.12 Mpps : Forwarding performance (64-byte packet size) : 13.6 Gbps Switching capacity : 74.41 Mpps : Forwarding performance (64-byte packet size) : 100 Gbps Power Supply 1 internal 1 internal 1 internal 1 internal Fanless     Physical Specifications 440(w) x 44(h) x 201(d)mm 440(w) x 44(h) x 350(d)mm 440(w) x 44(h) x 201(d)mm 440(w) x 44(h) x 350(d)mm   Buy Buy Buy Buy

NETGEAR’s family of Prosafe™ Gigabit Smart Switches is purposely designed for SMB customers with high performance, SMB-oriented features and easy management. With 48 10/100/1000 Mbps ports, each capable of powering 2000 Mbps of data throughput in full-duplex mode per port, plus two shared SFP ports, GS748Tv5 will enable SMB networks to support Voice over IP (VoIP), streaming media, multicasting, security, and many other bandwidth-intensive applications like ERP and large file transfers.



GS748Tv5: 48-port 1000base-T Gigabit Smart Switch
48 Gigabit copper Ports
2 dedicated SFP ports and 2 Combo SFP ports

Need Fibre Connectivity?

AGM731F

Fibre Gigabit 1000Base-SX (LC) SFP Module



Switch Comparison

GS716Tv3 GS724Tv4 GS724TPv2 GS748Tv5 Form Factor Rackmount Rackmount Rackmount Rackmount Port Speed Gigabit Gigabit Gigabit Gigabit 100M/1G Copper  (RJ-45) Ports 16 24 24 48 1G SFP Fibre Ports 2(dedicated)  2(dedicated) 2(dedicated)  2(dedicated) 2(Combo) PoE/PoE+ Ports (Budget) N/A N/A 24 PoE+ (190W) N/A Switching & Routing L2 Switching L2 Switching L2 Switching, L2+ Static IP routing L2 Switching Power Supply 1 internal PSU, fixed 1 internal PSU, fixed 1 internal PSU, fixed 1 internal PSU, fixed Fans Fanless Fanless 1 internal fan, fixed 1 internal fan, fixed Features VLAN, QoS, Link Aggregation VLAN, QoS, Link Aggregation VLAN, QoS, Link Aggregation VLAN, QoS, Link Aggregation Dimensions (WxDxH) mm 440 x 204 x 43 440 x 204 x 43 440 x 204 x 43 440 x 257 x 43   Buy Buy Buy Buy The GS748Tv5 come with a comprehensive set of features, such as access control lists (ACL), 802.1x port authentication, enhanced QoS, rate limiting and IGMP snooping among others to provide a small and medium-sized business with a network that is geared for growth while ensuring performance and reliability.

In addition, an intuitive, Web-browser interface offers the simple Smart Switch management, making it a snap to monitor switch performance, configure ports, even set up port trunks, VLANs, and traffic prioritisation. Alternatively, use SNMP-based software to manage your Smart Switch. Shipped ready for use straight out of the box, it delivers switching that’s easy to set up and use. NETGEAR ProSafe Smart Switches are ideal for adding basic management to your unmanaged networks or extending your managed networks.


Intelligence
Smart Switch capability enables key management features for the value price of an unmanaged switch. Included are performance monitoring, port configuration, VLAN for traffic control, port trunking for increased bandwidth, and Class of Service (CoS) for traffic prioritisation.

Enhanced Security
Build a secured, converged network with all types of traffic by preventing external attacks and blocking malware while allowing secure access for authorised users

802.1x for authentication
DHCP Snooping
Port-based security by locked MAC
ACL filtering to permit or deny traffic based on MAC or IP addresses.
Advanced Quality of Service (QoS)
Priority queuing ensures high-priority traffic gets delivered efficiently, even during congestion from high-traffic bursts. Companies implementing network telephony or video conferencing, for example, need to be able to prioritise such voice and video traffic and other real-time applications over less latency-sensitive traffic to ensure reliability and quality. The ability to prioritise traffic ensures quality of latency-sensitive services and applications despite increasing traffic loads. The ProSafe Gigabit Smart Switch provides an extensive set of QoS features:

802.1p-based prioritisation
Layer 3-based prioritisation
Port- based ingress and egress rate-limiting
Highlights

Designed for Converged Network, Big or Small

Gigabit Speed with non-blocking architecture supporting 100% Gigabit throughput
Auto Voice VLAN for fast and reliable deployment of VoIP
Auto Video VLAN, following the same concept of Auto Voice, help speed up your deployment of IP-based surveillance system
Static routing, helps to route internal traffic for more efficient use of network resources
IGMP and MLD snooping, providing advanced multicast filtering
Build a future-proof network with NETGEAR


Solid performance with non-blocking architecture, 16K MAC addresses, 256 VLANs, 100 shared ACL entries, 32static routes, and 512 Multicast Groups
Comprehensive IPv6 supporting management, QoS and ACL, ensuring investment protection and a smooth migration to IPv6-based network
Dedicated SFPs instead of combo ports, offering more connectivity ports and providing better value and usability at no extra cost
Energy Efficient Ethernet (IEEE802.3az) support for more energy saving in the future when more EEE-compliant end devices come to market
Advanced QoS with IPv4/IPv6 ingress traffic filtering and prioritisation
Dynamic VLAN assignment for easy user authentication and location-independent access to network
Multicast VLAN Registration for eliminating unnecessary multicast traffic and improve the efficiency of network utilisation
Network Development Made Easy


Auto Voice VLAN for easy development of VoIP
Auto Video for simple deployment of IP Surveillance
ACL Wizard for a guided tour to set up your network access control
Smart Control Center, a powerful tool for multi-switch discovery, deployment, monitoring and firmware upgrade
Network Management System (NMS300), allowing all NETGEAR business products to be deployed and managed through this single management interface
Small IT, not Big IT


Easy to manage via web-Based
Management GUI or Smart Control Center for multi-switch deployment
Standard-based technology, ensuring interoperability with any standard-based devices in the existing network
Dual firmware images, improving reliability and uptime to your network
Worry-free with NETGEAR ProSAFE Lifetime Hardware Warranty†
Assist with customer deployment with 1-year Free 24x7 Advanced Technical Support*Network Management System (NMS300), allowing all NETGEAR business products to be deployed and managed through this single management interface

The small and medium-sized businesses (SMBs) expect a higher level of performance from their networks - more connections to support diverse applications, fewer network disruptions, easier management and a greater degree of network security. The ZyXEL GS1920 series of switches fulfills these expectations with support for 48 non-PoE copper ports, as well as non-blocking performance and high-power budget support to facilitate a greater number of network connections.The ZyXEL GS1920 series offers network protection features and comprehensive access management functions to establish a reliable and secure network environment. To create a one-network experience, the GS1920 series features inter-device discovery and reset, which along with the ZON utility, reduces the time and effort needed to initialize the network. Easy deployment, smart management and solid security - the GS1920 series is the best solution for SMB networks. Features: Smart managed switch with essential L2 features
GbE RJ-45, GbE combo (RJ-45/SFP) and fixed GbE SFP connectivity
High 375-watt power budget
Supports ZON Utility, ZON inter-device features and iStacking facilitates easy network initialization and management
Reliable network availability with Loop Guard, IPSG, and CPU protection
Intrusion lock, RADIUS, static MAC forwarding and 802.1x authentication-enhance network security
Future-proofed with IPv6 support
Robust network availability Network disruptions are a frequent source of headaches for small to medium-sized businesses. Whether outages are caused by internal errors or outside attack, the ZyXEL GS1920 series protects users from network disruptions and ensures uninterrupted connectivity through several key features. Loop Guard helps networks avoid service disruptions caused by switching loops, and IP source guard (IPSG) shields your network from MAC spoof and ARP spoof attacks. Additionally, attacks such as BPDU, ARP and IGMP can target network facilities. However, CPU protection guarantees that a network continues to operate, even while under attack. Furthermore, dual firmware image and configuration features improve network reliability and availability. These are just some of the ways the GS1920 series switches guarantee headache-free network connectivity for SMBs.
Rigorous access protection to secure the network The ZyXEL GS1920 series provides efficient allocation of network resources while ensuring comprehensive access protection, along with simple and secure network control. Intrusion Lock detects connection status and ensures port security. Not only does the GS1920 series support 802.1x authentication with RADIUS, but it can monitor, filter and police all traffic between clients within the same subnet, creating an even higher degree of security.
ZyXEL ONE Network experience The ZyXEL GS1920 series utilizes the ZON utility and other interdevice features designed to reduce the time and effort necessary to set up a network. The GS1920 series allows one-click remote management to detect ports that connect neighboring devices while displaying IP information via a Web-based GUI. If a network-connected device like a Wi-Fi access point fails to operate properly, administrators can reset the device to default or power cycle the device from a switch in the Web-based GUI. Additionally, the GS1920 series supports iStacking, which allow 1-IP management to configure, monitor and troubleshoot multiple switches installed at a variety of physical locations.

HPE OfficeConnect 1820-48G J9981A 48 Port Gigabit  devices are basic, smart-managed, fixed-configuration Gigabit Ethernet Layer 2 switches designed for small businesses looking for key features in an easy-to-administer solution.



The HPE 1820-48G J9981A 48 Port Smart Managed Switch offers more choice and flexibility for smaller organisations that require ease of use and lower Total Cost of Ownership (TCO), while delivering better network performance. They are smart-managed, fixed configuration, Gigabit Ethernet Layer 2 switches in an easy-to-administer solution that have the latest energy-saving capabilities. These switches are plug-and-play out of the box, where network operation can be fine-tuned through features available from a simple Web browser-based GUI, when needed.

Features:

Smart-managed Layer 2 switch with 48 10/100/1000 ports
Four non combo Gigabit SFP ports for fibre connectivity.
Fanless with silent operation.
Features an intuitive Web management interface with an enhanced navigation pane for easy management of devices by non-technical users 
Includes the latest energy-savings capabilities, including Energy Efficient Ethernet (IEEE) and idle-port power down
Traffic prioritisation provides time sensitive packets (like VoIP and video) with priority over other traffic based on DSCP or IEEE 802.1p classification
HPE 1820-48G: 48 x RJ-45 autosensing 10/100/1000 ports
4 non combo 1000/100 SFP ports for fibre connectivity
Smart Managed  

Easy-to-Use, Simple to Deploy and Manage

The HPE 1820-48G Switch features an intuitive Web management interface with an enhanced navigation pane for easy management of devices by non-technical users, ideal for organisations that require simplicity.

Customisable features include VLANs, Spanning Tree, Link aggregation trunking, and IGMP Snooping. All models include Rapid Spanning Tree Protocol (RSTP) and DSCP QoS policies.


Energy Efficiency and Lower TCO

The HPE 1820-48G Switch includes the latest energy-savings capabilities, including Energy Efficient Ethernet (IEEE) and idle-port power down


Quality of Service (QoS)

The HPE 1820-48G Switch traffic prioritisation provides time sensitive packets (like VoIP and video) with priority over other traffic based on DSCP or IEEE 802.1p classification. Packets are mapped to eight hardware queues for more effective throughput.

Broadcast control allows limiting of broadcast traffic rate, to reduce unwanted network broadcast traffic.

IEEE 802.11p/Q delivers data to devices based on the priority and type of traffic.
 

Management

The HP 1820-48G Switch is a basic, smart managed, fixed-configuration Gigabit Ethernet Layer 2 fanless switch designed for Small businesses looking for key features in an easy to administer solutuion



Quality of Service (QoS)

Customisable features include VLANs, Rapid Spanning Tree, IGMP Snooping, Link AggregationTrunking and DSCP QOS Policies



Security

Secure Sockets Layer (SSL) encrypts all HTTP traffic, allowing secure access to the browser -based management GUI in the switch



Performance

Half-/full-duplex auto-negotiating capability on every port doubles the throughput of every port. IGMP snooping improves network performance through multicast filtering, instead of flooding traffic to all ports 


Layer 2 switching and convergence

VLAN support and tagging supports up to 64 port based VLANs and dynamic configuration of IEEE 802.1Q VLAN tagging, providing security between workgroups

JG914A
1620 48G J9981A
1820 48G J9984A
1820 48G PoE+ JL171A
1850 48G 2XGT Form Factor Rackmount Rackmount Rackmount Rackmount Switching Capacity 96 Gbps 104 Gbps 104 Gbps 176 Gbps Predominant Port Type 1 GbE Gigabit Copper 1 GbE Gigabit Copper 1 GbE Gigabit Copper 1 GbE Gigabit Copper Port Count 48 48 48 48 Uplink Speed/Media N/A 4 SFP 100/1000 Mbps ports 4 SFP 100/1000 Mbps ports 4 RJ-45 1/10GBASE-T ports PoE/PoE+ Ports N/A N/A 24 N/A PoE Budget N/A N/A 370 W PoE+ N/A Management Web Managed Smart Managed Smart Managed Smart Managed Functionality Layer 2 Only Layer 2 Only Layer 2 Only Layer 2 Only Dimensions (Inches) 17.32(w) x 9.37(d) x 1.73(h) 17.42(w) x 9.69(d) x 1.73(h) 17.42(w) x 12.7(d) x 1.73(h) 17.42(w) x 9.7(d) x 1.73(h)  

HP 1620-48G Switch is ideal for small businesses looking for basic network features in a Smart Managed switch. This gigabit switch is plug-and-play out of the box. A Web GUI provides ease of access to fine tune switch operation, if necessary.

The HPE 1620 Gigabit Switch Series is an entry-level, smart-managed switch ideal for small businesses looking for basic network features to enhance network performance but without the added complexity and cost of more advanced switches. Part of the HP OfficeConnect portfolio, these switches are plug-and-play out of the box. An intuitive Web GUI provides ease of access to fine tune switch operation, if necessary. Customisable features include VLANs, IEEE802.1p QoS and IGPM Snooping.

Features:

The HPE 1620 Switch Series is an entry-level, smart-managed switch ideal for small businesses that deliver plug-n-play out of the box. No device configurations are needed to get up and running at gigabit speeds.
The HPE 1620 Switch Series includes VLAN support to provide network traffic and resource segregation for additional security and better network performance.
The HPE 1620 Switch Series has a Limited Lifetime Warranty.


HPE 1620-24G: 24 x RJ-45 autosensing 10/100/1000 ports
Web managed, Fanless

Simple Deployment and Management The HPE 1620 Switch Series is an entry-level, smart-managed switch ideal for small businesses that deliver plug-n-play out of the box. No device configurations are needed to get up and running at gigabit speeds.

An intuitive Web interface provides access to fine tune network performance, if necessary.

Auto-speed negotiation automatically selects individual port speed depending on client capabilities without the need for manual intervention.

All models come with internal power supplies removing the need to manage external power adapters and can be rack mounted with the included hardware. The 8-port model can be deployed on the desktop, on the wall or in the rack.


Enhance Network Performance The HPE 1620 Switch Series includes VLAN support to provide network traffic and resource segregation for additional security and better network performance.

IEEE 802.1p QoS and IGMP Snooping prioritises traffic and reduces unnecessary broadcast of multicast traffic for efficient network utilisation.


Peace of Mind The HPE 1620 Switch Series has a Limited Lifetime Warranty.

The switch series uses Energy Efficient Ethernet for lower power consumption.


Click on the product images below to be taken to the range of products



JG913A
1620 24G JG914A
1620 48G J9984A
1820 48G J9983A
1820 48G PoE+ Form Factor Rackmount Rackmount Rackmount Rackmount Switching Capacity 48 Gbps 96 Gbps 104 Gbps 104 Gbps Routing/Switching Layer 2 Only Layer 2 Only Layer 2 Only Layer 2 Only 100M/1G Copper  (RJ-45) Ports 24 48 48 48 Uplink Speed/Media N/A N/A 4 SFP 100/1000 Mbps ports 4 SFP 100/1000 Mbps ports PoE/PoE+ Ports N/A N/A N/A 24 PoE Budget N/A N/A N/A 370 W Management Web Managed Web Managed Smart Managed Smart Managed Warranty Limited Lifetime Limited Lifetime Limited Lifetime Limited Lifetime Dimensions (Inches) 17.32(w) x 6.81(d) x 1.73(h) 17.32(w) x 9.37(d) x 1.73(h) 17.42 (w) x 9.69(d) x 1.73(h) 17.42 (w) x 12.7(d) x 1.73(h)

Build a Reliable, Easy-to-Use Basic Business Network at an Affordable Price

In today's hyper connected world, reliable access to network resources is critical to all businesses. However, you also need to invest wisely to stay competitive, knowing how to separate the essential from the extraneous and get the most value for your money. For investment in network infrastructure, building a solid foundation for your business is essential, but it doesn’t mean you need the most advanced feature set on the market.

Specifications at a Glance

48-port 10/100 Mbps switch
2 Gigabit copper/SFP combo + 2 SFP ports
Fanless, Silent
Internal Power Supply
With a Cisco SF250-48 Smart Switch, you can achieve business-class network performance and security without paying for advanced network management features that you will not use. When you need a reliable solution to share online resources and connect computers, phones, and wireless access points, but low cost is a top priority, Cisco 250 Series Smart Switches provide the ideal solution.



The Cisco SF250-48, part of the 250 series, is the next generation of affordable smart switches that combine powerful network performance and reliability with the essential network management features you need for a solid business network. These expandable Gigabit Ethernet switches provide basic management, security, and quality-of-service (QoS) features beyond those of an unmanaged or consumer-grade switch, at a lower cost than managed switches. And with an easy-to-use web user interface andAuto Smartports, you can deploy and configure a complete business network in minutes. Features and Capabilities

Powerful capabilities
In addition to basic management, security, and quality of service (QoS), these switches also support capabilities such as Multiple Spanning Tree (MSTP)
Easy setup and management
Cisco's intuitive, browser-based user interface is now even more user-friendly, with simple mode and a configuration wizard for common configurations. The switches also come with a USB port for easier file management.
Performance and reliability
The 250 Series is designed and tested to deliver the high performance and reliability you would expect from Cisco switches, so you can enjoy speedy file transfers and keep vital business applications available.
Energy efficiency
Rich energy-saving features are embedded across the portfolio, including energy-detect, cable length detection, and Energy Efficient Ethernet (EEE). All these provide an eco-friendly and cost-effective solution without compromising performance.
Peace of mind
All switches come with a limited lifetime warranty and include one year of technical support and free software fixes for the term of the warranty.
New simplified web GUI and configuration wizards for most intuitive management
Cisco® Smart Network Application (SNA) for network-level management
Cisco FindIT Network Manager
Cisco Network Plug and Play (PnP)
Cisco Active Advisor for inventory, advisory, and life-cycle management
New USB port added for easy image and configuration transfer




Reliable SMB network foundation



Switch Comparison

SF250-48 SF250-48HP SG250-50 SG250-50HP SG250-50P Form Factor Rackmount Rackmount Rackmount Rackmount Rackmount Ports 48 x 10/100, 2 x Gigabit SFP/RJ-45, 2 x Gigabit SFP 48 x 10/100/1000, 2 x Gigabit SFP/RJ-45 Number of PoE+ Ports  - 48 - 48 48 Power Dedicated to PoE  - 195 watts - 192 watts 375 watts Features Layer 2 switching, Layer 3 switching, DHCP support, BOOTP support, VLAN support, IGMP snooping, Syslog support, port mirroring, DiffServ support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, SNTP support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP), Multiple Spanning Tree (MSTP), Trivial File Transfer Protocol (TFTP) support, access control list (ACL) support, quality of service (QoS), jumbo frames support, MLD snooping, SNMP, RMON, SNTP, Cisco Discovery Protocol, Auto SmartPorts Status indicators System, link/speed per port System, link/speed per port System, link/speed per port System, link/speed per port System, link/speed per port Jumbo frame support Performance 17.6-Gbps switching capacity, 13.1-Mpps forwarding performance (64-byte packet size) 100-Gbps switching capacity, 74.41-Mpps forwarding performance (64-byte packet size) Power Supply 1 internal Fanless - - - - Physical Specifications 440(w) x 44(h) x 257(d)mm 440(w) x 44(h) x 350(d)mm 440(w) x 44(h) x 257(d)mm 440(w) x 44(h) x 350(d)mm 440(w) x 44(h) x 350(d)mm   Buy Buy Buy Buy Buy

The DGS-1210-48 48-Port Gigabit Smart Managed Switches with Four Fibre Uplinks is the latest generation of D-Link Smart Managed Switches. With D-Link Green 3.0 technology, the series offers a high level of energy saving and efficiency, as well as compliance with IEEE 802.3az Energy Efficient Ethernet standard.

Features:

48-Port Gigabit Smart Managed Switch
4 combo 1000BASE-T/SFP ports
Fanless
Easily manage your entire network with the Web GUI or D-Link Network Assistant using features like automatic switch discovery, batch operations, and more
Innovative Safeguard Engine, ACL, and ARP Spoofing Prevention protect your network from malicious attacks and illegal access
Range of D-Link Green Technology features help save energy usage automatically and reduce costs, without sacrificing performance
DGS-1210-48: 44 x 1000Base-T  4 Combo 1000 Mbps Base-T /1000 Mbps SFP 
  D-Link green The DGS-1210-48 implements D-Link Green, an innovative concept that provides energy savings without sacrificing operational performance or functionality. The switch reacts when devices attached to it are turned off, by placing the corresponding port in a standby mode that requires less power. It also automatically detects the length of connected cables, which allows it to cut power usage on shorter cable connections up to 20 m.



Seamless integration The DGS-1210-48 includes 48 10/100/1000 Mbps ports capable of connecting to existing Cat. 5 twisted-pair cables. Additionally, the last four ports of the DGS-1210-48 combine SFP and copper connectivity into one port and therefore provide a flexible solution for server connections via fibre interface. Using the default presets, the administrator can quickly set up the switch without worrying about reconfiguring any settings and providing easy access for the user.


Extensive layer 2 features Equipped with a complete lineup of L2 features, these switches include IGMP snooping, port mirroring, spanning tree and Link Aggregation Control Protocol (LACP). The IEEE 802.3x flow control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000Mbps full duplex, the gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback detection and cable diagnostics. Loopback detection is used to detect loops created by a specific port and automatically shut down the affected port. Cable diagnostics is designed for network administrators to quickly examine the quality of the copper cables and also determine the type of cable error.


QoS, bandwidth control The switches are perfect for deployment in a VoIP environment, as they support Auto Voice VLAN and Differentiated Services Code Point (DSCP) QoS for VoIP application. Auto Voice VLAN will automatically place voice traffic from an IP phone to an assigned VLAN and by doing so enhance the VoIP service. With a higher priority and individual VLAN, this feature guarantees the quality and security of VoIP traffic. DSCP marks parts of an IP packet, enabling different levels of service to be assigned for network traffic. With Bandwidth Control, the network administrator can reserve bandwidth for important functions that require a larger bandwidth or might have high priority.


Secure your network D-Link's innovative safeguard engine function protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and helps to protect the internal IT network. The DGS-1210 series includes ARP spoofing prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames on a LAN, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages to the network. To prevent ARP spoofing attacks, the switch uses packet control ACLs to block invalid packets that contain fake ARP messages. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorised IP assignment.

The HPE OfficeConnect 1920S 48G 4SFP  JL382A Switch , is designed for small businesses that require enhanced performance to support bandwidth-demanding applications. They are ideal for environments that require advanced features for granular control and where smart-managed flexibility is a must for easy network configuration and management. The switches are advanced smart-managed fixed configuration Gigabit switches that are optimised for small business price/performance.

Features:
48-port Gigabit Advanced Lite Layer 3 Smart Managed Switch
48-RJ-45 auto-negotiating 10/100/1000 ports
4 SFP 100/1000 Mbps ports
Up to 77.3Mbps of  Throughput
104 Gbps Routing/switching capacity
Simple and consistent Web interface for easy switch configuration.
Limited Lifetime Warranty 
Simplifies Network Deployment and Management for Small Organisations The HPE OfficeConnect 1920S 48G 4SFP Gigabit Smart Managed Switch features easy-to-use, out of the box, plug-and-play deployment allowing for easy management of the switch - even by nontechnical users - through an intuitive Web GUI; supports HTTP and HTTP Secure (HTTPS)
Keeps Your Business Protected with Enhanced Security Enhanced security features such as Access Control List, IEEE 802.1x and VLANs guard your network from unwanted or unauthorised access.

Management security restricts access to critical configuration commands, offers multiple privilege levels with password protection and supports secure http (https). Delivers Better Performance at a Lower Total Cost of Ownership The HPE OfficeConnect 1920S 48G 4SFP Switch delivers advanced functionality in smart-managed switches, including Layer 3 static routes, SFP Ports, rate limiting, link aggregation and IGMP.

Four SFP ports for fibre connectivity provides fibre connections for uplinks and other connections across longer distances than copper cabling can support; SFP ports are in addition to available copper Ethernet ports, providing a higher total .

The HPE OfficeConnect 1920S 24G 2SFP Switch supports Energy Efficient Ethernet for lower power consumption and an enhanced feature set for more robust operation. 

Green features like port shutdown and Energy Efficient Ethernet compliance for greater energy-efficiency.

The switch series is covered by the Limited Lifetime Warranty with 24x7 phone support for 90 days and business hours thereafter.

Click on the product images below to be taken to the range of products

TP-LINK JetStream Gigabit Smart Switch T1600G-52TS is a cost-effective product solution for small and medium-sized business which provides high performance, powerful L2 and L2+ features like static routing, enterprise-level QoS and useful security strategies. Equipped with 48 gigabit RJ45 ports and 4 SFP slots, T1600G-52TS supports multiple useful features. Static Routing helps route internal traffic for more efficient use of network resources. The Storm Control feature protects against Broadcast, Multicast and Unknown unicast Storm. Quality of Service (QoS, L2 to L4) provides enhanced traffic management capabilities to move your data smoother and faster. Moreover, the easy-to-use web management interfaces, along with SNMP, RMON and Dual Image, mean faster setup and configuration with less downtime. For workgroup and departments requiring cost-sensitive L2/L2+ switch and gigabit capability, TP-LINK JetStream Gigabit Smart Switch T1600G-52TS provides you the ideal access-edge solution.

Features:

Gigabit Ethernet connections on all ports provide full speed of data transferring
L2+ Feature - Static Routing, helps route internal traffic for more efficient use of network resources
Integrated security strategy including 802.1Q VLAN, Port Security and Storm control help protect LAN area investment
L2/L3/L4 QoS and IGMP snooping optimize voice and video applications
IPv6 support with dual IPv4/IPv6 stack, MLD snooping, IPv6 neighbor discovery
WEB/CLI managed modes, SNMP, RMON and Dual Image bring abundant management features
Advanced QoS features

To integrate voice, data and video service on one network, the switch applies rich QoS policies. Administrator can designate the priority of the traffic based on a variety of means including Port Priority, 802.1P Priority and DSCP Priority, to ensure that voice and video are always clear, smooth and jitter free. In conjunction with the Voice VLAN the switch supports, the voice applications will operate with much smoother performance.


Abundant L2 and L2+ features

For more application of L2 switches, T1600G-52TS supports a complete lineup of L2 features, including 802.1Q tag VLAN, Port Isolation, Port Mirroring, STP/RSTP/MSTP, Link Aggregation Group and 802.3x Flow Control function. Any more, the switches provide advanced features for network maintenance such as Loop Back Detection, Cable Diagnostics and IGMP Snooping. IGMP snooping ensures the switch intelligently forward the multicast stream only to the appropriate subscribers while IGMP throttling & filtering restrict each subscriber on a port level to prevent unauthorised multicast access. Moreover, T1600G-52TS supports L2+ feature - static routing, which is a simple way to provide segmentation of the network with internal routing through the switch and helps network traffic for more efficient use.


IPv6 Support

T1600G-52TS supports various IPv6 functions such as Dual IPv4/IPv6 Stack, MLD Snooping, Path Maximum Transmission Unit (PMTU) Discovery and IPv6 Neighbor Discovery.


Enterprise level management features

T1600G-52TS is easy to use and manage. It supports various user-friendly standard management features, such as intuitive web-based Graphical User Interface(GUI) or SNMP (v1/2/3) and RMON support enables the switch to be polled for valuable status information and send traps on abnormal events. And it also supports Dual Image?which provides reduced down-time for the switches, when the image is being upgraded / downgraded.

D-Link’s DGS-1210-52 is a 48 Port Gigabit Smart+ Switch with 4 Fibre Uplinks which integrates advanced management as well as security functions that provide performance and scalability. Management options for the switch include SNMP, Web Management, D-Link Network Assistant Utility and compact command lines. The DGS-1210 Series uses Auto Voice VLAN, ensuring bandwidth is prioritised for a smoother voice performance. The DGS-1210-52 features a smart fan design that adjusts the fan speed depending on device temperature, saving energy and cutting costs without sacrificing performance.



DGS-1210-52: 48 x 1000GBase-T 4 x 1GbE SFP

Extensive Management and Layer 2 Features Equipped with a complete line-up of L2 features, the DGS-1210 Series includes IGMP snooping, port mirroring, spanning tree protocol and Link Aggregation Control Protocol (LACP). The IEEE 802.3x flow control function allows servers to directly connect to the switch for fast, reliable data transfers. At 2000 Mbps full duplex, the Gigabit ports provide high-speed data pipes to servers with minimum impact to data transfer fidelity. Network maintenance features include loopback detection and cable diagnostics. Loopback detection is used to detect loops created by a specific port and automatically shut down the affected port. The cable diagnostic feature, designed primarily for administrators and customer service representatives, can rapidly discover errors and determine the cable quality, allowing hassle free diagnostics and maintenance.

QoS, Bandwidth Control The DGS-1210 Series supports Auto Surveillance VLAN (ASV), and Auto Voice VLAN, which are best suited for VoIP and video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology that the DGS-1210 Series Gigabit Smart+ Switch with Fibre Uplinks provides. This technology consolidates data and surveillance video transmission through a single DGS-1210 Series, thus sparing businesses the expense of dedicated hardware and facilities. ASV also ensures the quality of real-time video for monitoring and control without compromising the transmission of conventional network data. The Auto Voice VLAN technology enhances the VoIP service by automatically placing voice traffic from an IP phone to an assigned VLAN. With higher priority and individual VLAN, these features guarantee the quality and security of VoIP traffic. The DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic. As a result, these voice and video packets take precedence over other packets. In addition, with bandwidth control, network administrators can reserve bandwidth for important functions that are higher priority or require a larger bandwidth.

Secure your Network

D-Link’s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The DGS-1210 Series supports 802.1X port based authentication, allowing the network to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and helps to protect the internal IT network. The DGS-1210 Series includes ARP spoofing prevention, which protects from attacks on the network that may allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages. To prevent ARP spoofing attacks, the switch uses packet control ACLs to block invalid packets that contain fake ARP messages. For added security, the DHCP server screening feature routes DHCP server packets from user ports to prevent unauthorised IP assignment.

Versatile Management

The DGS-1210 Series provides a D-Link Network Assistant Utility that enables administrators to remotely control their network down to the port level. The D-Link network assistant utility allows customers to easily discover multiple D-Link Web Smart Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC. It also simplifies the initial setup by taking switches, within the same L2 network segment, that are connected to the user’s PC, and displaying them on screen for instant access. This allows extensive switch configuration and basic setup of discovered devices, including password changes and firmware upgrades. 
The DGS-1210 Series also supports D-View 6.0 and Compact Command Line Interface (CLI) through Telnet. D-View 6.0 is a network management system that allows for the central management of critical network characteristics such as availability, reliability, resilience, and security.

Energy Saving

Incorporating D-Link Green technology, the DGS-1210 Series switches are capable of power-saving without sacrificing operational performance or functionality. Link status drastically reduces power consumption by automatically toggling ports without a link to sleep mode. The DGS-1210 Series takes the approach to green IT one step further by incorporating a special chipset with advanced silicon technology for efficient use of energy.

The ZyXEL GS1900-48HP is a smart managed switch with 48 Gigabit ports to provide network connectivity and flexibility to a business network. With IPv6 support, this ZyXEL GS1900-48HP 48-Port Smart Managed Gigabit Switch has been designed with a host of useful features and advanced performances that empower your networks with speed and security as well as silent operation in your office environments. The ZyXEL GS1900-48HP switch also features two SFP ports for Gigabit uplinks and network expansion and 802.3at PoE+ for powering external PoE devices up to 30W.

Features


Forty-Eight (48) 10/100/1000 Gigabit Ethernet RJ45 ports.
Twenty Four (24) PoE+ 802.3at ports, total budget 170W.
Two (2) Small Form Factor SFP Ports for network uplinks.
Easy browser-based switch management.
Quick and easy set up wizard.
Advanced network error prevention features.
Green Ethernet IEEE 802.3az supporting ZyXEL green features.
Traffic Management and QoS.
Versatility And Flexibility

The ZyXEL GS1900-48HP 48-Port Smart Managed Gigabit Switch is Rackmountable for supporting multiple deployment methods to fulfil the needs for small offices and meeting room environments such as under a table, on a desktop or within a server rack or data cabinet. It's now quick and effortless to enjoy the high-speed business network applications without a hitch.



Zyxel One Network experience
Aiming for relieving our customers from repetitive operations of deploying and managing a network, Zyxel One Network is designed to simplify the configuration, management, and troubleshooting, allowing our customers to focus on the business priorities. Zyxel One Network presents an easy-to-use tool, Zyxel One Network Utility (ZON Utility), to realise speed network setup. Zyxel Smart Connect allows Zyxel networking equipment to be aware and recognise each other and further facilitating the network maintenance via one-click remote functions such as factory reset or power cycling. Zyxel One Network redefines the network integration across multiple networking products from switch to Wi-Fi AP and to Gateway.


Simple, intuitive wizard set up

For small businesses that want to manage their infrastructure in advance, the ZyXEL GS1900-48HP switch comes with a friendly built-in Web-based browser for simple configuration and management. Moreover, the friendly step-by-step intuitive wizard helps avoiding multiple complicated configuration pages for quick set up with few clicks in the matter of minutes. To guide the users from start-up, VLAN, Guest VLAN to QoS setting, the complex steps have been combined into four quick individual steps; which does not just save deployment time and efforts, but is also helpful especially for the non-IT staff.




Avoiding network errors with easy management
The ZyXEL GS1900-48HP switch is equipped with advanced management features to make the network stable and secure: loop protection that prevents network flooding, dual images to provide a backup FW if one crashes and storm control to ensure network efficiency, friendly on/off DoS with simple click to enable/disable instead of several setup pages, while SSL ensures the management frames are well encrypted when the device is accessed. The ZyXEL GS1900-48HP switch provides network error prevention features and integrated network security for reduced risk and improved data streaming.

Energy Saving For IEEE 802.3az

As operating overheads such as electric bills increase constantly due to the arising green awareness, businesses have to avoid unnecessary energy waste. The built-in IEEE 802.3az Energy Efficient Ethernet (EEE) and more ZyXEL innovative green features of ZyXEL GS1900-48HP switch can reduce energy consumption of Ethernet devices through multiple intelligent ways.

Traffic detection: Energy Efficient Ethernet (EEE) compliance: The IEEE 802.3az Energy Efficient Ethernet (EEE) feature automatically detects network traffic and adjusts power consumption dynamically, as such the switch can reduce power consumption during low link utilisation periods.
Inactive link detection: The inactive link detection function automatically reduces power usage when inactive links or devices are detected. The ZyXEL GS1900 Series can adjust power consumption according to the link status and number of the active network devices.
Cable length detection: This green feature enables the switch to automatically detect the length of connected Ethernet cables and adjust power usage accordingly. The shorter the cable length, the less power it consumes.
Intelligence To Power More Devices

ZyXEL's Intelligent PoE feature provides two PoE supply modes: classification mode and consumption mode. Especially in consumption mode, the ZyXEL GS1900-48HP reserves the actual required power automatically, and you can set power feeding priorities on different ports to get the optimised use of power resource. This capability increases the number of devices connected and deliver a better ROI for the business. In addition, the ZyXEL GS1900-48HP supports the IEEE 802.3at standard on 24 ports, providing a maximum of 30 watts per port, with a total budget of 170 watts for devices with higher power requirements such as IP phones, IP cameras and wireless access points.

The NETGEAR Insight Managed Smart Cloud GC752X is the first 52-port Gigabit Ethernet Switch from NETGEAR with anytime, anywhere remote/cloud management. Using either the NETGEAR Insight mobile app or the Insight Cloud Portal you can easily setup, monitor and manage your Insight Managed Switches, Wireless Access Points, and business-class ReadyNAS storage. The NETGEAR GC752X features 48 copper Gigabit Ethernet ports, 2 SFP 1G and 2 SFP+ 10G fibre ports for maximum flexibility and connectivity in your network. With its remote cloud manageability, and advanced L2+/L3 Lite features, it's the most versatile switch on the market for any environment!



Experience the most versatile and easy to manage switches in the market

As a leading provider of network equipment for SMBs, NETGEAR® understands the importance of reliable and high performance networks. With the growth of virtualisation, cloud-based services and applications like VoIP, video streaming and IP surveillance, SMB networks need to extend beyond simple reliability to simpler management and remote monitoring to ensure your network is “always up”. NETGEAR also understands that small business owners shouldn’t have to understand networking and IT; they need a network that’s easy-to-setup and is reliable, so they can focus on their business, not their network. To that end, NETGEAR is introducing our most versatile and easy-to-manage switches ever, NETGEAR Insight Managed Smart Cloud switches.

Features:

Solid performance with a non-blocking architecture (up to 140Gb/s network fabric)
Comprehensive IPv6 management, QoS and ACL support, ensuring investment protection and a smooth migration to IPv6-based networking
Dedicated SFP ports support long-distance uplinks or can be used for redundancy and failover, improving reliability and availability for network virtualisation
Energy Efficient Ethernet (IEEE 802.3az) support for more energy savings in the future when more EEE-compliant end devices come to market
Advanced QoS with IPv4/IPv6 ingress traffic filtering (ACLs) and prioritisation (QoS)
Dynamic VLAN assignment for easy user authentication and location-independent access to network
IPV4 & IPV6 static routing allow for a simple way to provide segmentation of the network with internal routing through the switch – reserving the router for external traffic routing only, making the entire network more efficient.
Highlights

One-touch network connectivity and management with the NETGEAR Insight app

The NETGEAR Insight Managed Smart Cloud Switches fundamentally change the way you think of networks and IT. Using the NETGEAR Insight app with Insight Managed Smart Cloud Switches and Wireless Access Points provides:

Instant in-app discovery & set-up
Centralised network configuration polices with auto-join and configure (zero-touch provisioning)
Multi-site/remote network management and monitoring with single pane-of-glass view
No additional cloud controller, appliance, network manager, or PC/server is necessary
 

Insight  

Remote monitoring and management from the palm of your hand!

With the NETGEAR Insight app, you can setup, manage, and monitor your networks from anywhere, anytime, from the palm of your hand!

Network-centric configuration and management

NETGEAR Insight Managed Switches and Wireless Access Points using the NETGEAR Insight app allow for cross-device automated configuration of VLANs, QoS, ACLs and LAGs. Auto-join and configure (zerotouch provisioning) allows for additional devices to be added seamlessly.



Port Configuration and Monitoring Network Dashboard Single Pane-of-Glass View of Multiple networks/locations Fully-integrated cloud-manageable devices

Insight Managed switches are fully-integrated, cloud-manageable devices. Just connect and go.

Clean, sleek and whisper quiet design

Insight Managed Smart Cloud switches have a modern, clean design, with a full complement of LEDs including power, cloud connection and fan status, as well as per port connection/link status All models have whisper quiet fan(s), a Kensington lock receptacle, and are rack-mountable with the included rack-mount kit.

Example Application

In a Business/Retail Environment Netgear GC728X Netgear  GC728XP Netgear GC752X Netgear GC752XP Form Factor Rackmount, Desktop Rackmount, Desktop Rackmount, Desktop Rackmount, Desktop LEDs (System) Cloud, Power, Fan Cloud, Power, PoE Max Cloud, Power, Fan Cloud, Power, PoE Max, Fan 100M/1G Copper  (RJ-45) Ports 24 24 48 48 1G SFP Fibre Ports 2 (dedicated) 2 (dedicated) 2 (dedicated) 2 (dedicated) 10G SFP+ Fibre Ports 2 (dedicated) 2 (dedicated) 2 (dedicated) 2 (dedicated) PoE/PoE+ Ports (Budget) N/A 24 PoE (390W) N/A 48 PoE+ (505W) LEDs (Per Port) Speed/Link/Activity Speed/Link/ Activity, PoE Speed/Link/ Activity Speed/Link/ Activity, PoE Power Supply 1 internal PSU, fixed 1 internal PSU, fixed 1 internal PSU, fixed 1 internal PSU, fixed Fans 1 internal fan, fixed 2 internal fans, fixed 1 internal fan, fixed 3 internal fans, fixed   Buy Buy Buy Buy

* The Insight Cloud Portal is only available with the Insight Premium subscription.

2nd Generation Gigabit Stackable Smart Switches Enhance Scalability and Network Convergence for Growing Businesses

The GS752TSB 52 Port ProSafe® Gigabit Stackable Smart Switch is unique in delivering the scalability, reliability, and performance growing small and medium-sized businesses need in an affordable and easy-to manage package. The NETGEAR Second Generation 52 port switch comes with 48 port copper ports and 6 SFP fibre ports, 2 of which are shared and 4 dedicated for either stacking or uplinks. This new generation of Stackable Smart Switches offers more flexibility and scalability that will make it easier and non-interruptive for growing businesses to expand their network capacity.



GS752TSB : 48-port 1000base-T Gigabit  Stackable Smart Switch
2 x Combo ports to support 10/100/1000 Mbps copper ports or 1 G/100 M optical module
2 x SFP slots (port 25 and 26) to support 1 G optical module
2 x SFP slots (port 27 and 28) to support 1 G optical module (uplink) and 2.5 G stacking The new generation of Stackable Smart Switches use 2 dedicated dual-purpose ports in the front of the switch for stacking or uplink. The stacking function offers a 10 Gbps, dual-ring, highly redundant stacking bus that carries intra-stack traffic and provide the highest level of resilience, allowing you to stack up to six switches or up to 300 10/100/1000 Mbps ports, forming a virtual chassis for easy management under a single IP address. This stacking technology also provides several high-availability features to ensure business continuity:

Resiliency: Due to redundant stacking port connections, there is an automatic fail-over in case any switch in the stack fails, with rapid reconfiguration, thus preventing network downtime
Hot-swappable: All switches in the stack are hot-swappable, and can be integrated or removed without disrupting the network
These Stackable Smart Switches come with a complete suite of advanced features for more robust security, higher quality of service and high availability. This switch is equipped with highly advanced features such as access control lists (ACL), static routing, rate limiting, IGMP snooping, and Dynamic VLAN assignment among others to provide a small and medium-sized business with a network that is geared for growth and new network applications. Friendly to converged network with voice and video, the Stackable Smart Switches offers auto voice and auto video features that automatically configures QoS, security and VLAN settings for IP phones and IP cameras.

In order to accommodate the move by internet service providers to IPv6 addresses, the 2nd Generation of Gigabit Stackable Smart Switches expand the IPv6 support beyond management only to QoS, ACL and multicast. It means that your network will benefit from the IPv6 enhancements and is future-proofed.

The Cisco SG220-50 is a 48 Port Gigabit Smart Plus Switch with 2 Gigabit Combo Ports (RJ45 + SFP), is an affordable smart switch equipped with enhanced security, intelligence and performance. For small and medium-sized businesses running on a tight budget but still requiring a solid network, these switches deliver an excellent combination of features, performance and ease of use to build a fast, reliable and highly secure network - at a lower price than managed switches..

Cisco 220 Series: Solid Business Network at an Affordable Price
Enjoy a higher level of management, security and scalability without the cost complexity of a managed switch

Cisco Small Business 220 Series Smart Plus Switches bridge the gap between managed and smart switches to offer customers the best of both worlds. Combining powerful performance with reliability, they provide the higher levels of security, management, and scalability you expect from managed switches, affordably priced like smart switches.

Choose the Cisco SG220-50 for:

48 Gigabit 10/100/1000 Ports with 2 Gigabit Ethernet Combo Ports (RJ45/SFP)
Support: with Cisco Small Business Support Service and a limited lifetime warranty.
Value: Enjoy the affordability of smart switches while getting the higher levels of security, management and scalability only found in managed switches.
Enhanced security: Cisco switches offer several security capabilities, including advanced threat defense, access control lists (ACLs), 802.1x, and many others. You can be confident that you have the protection you need.
Easy setup and management: Intuitive browser–based tools simplify setup and configuration. Advanced command line interface (CLI) management options are also available.
The SG220-50 is easy to manage and fan-less for quiet operation.
Business Applications

With Cisco 220 Series Switches, you can not only build an efficient and reliable network to connect the workforce, but also advanced solutions to deliver data, voice, and video services on a converged infrastructure. Get the best value for your money by improving the productivity of employees. Possible deployment scenarios include:

Secured desktop connectivity Cisco 220 Series Switches can quickly and reliably connect employees working in small offices with each other and with all of the servers, printers, and other devices they use. With device authentication and access control, you can maintain the integrity of key business information while keeping you employees connected and productive.
Flexible wireless connectivity. With comprehensive security and quality of service (QoS) capabilities, Cisco 220 Series Switches provide a solid foundation to add business-grade wireless to the network. You can easily move up to a cutting-edge 802.11ac wireless access point to increase workforce productivity without worrying about power and throughput.
Unified communications. The Cisco 220 Series Switches provide QoS features to automatically prioritize delay-sensitive traffic to help you easily deploy an IP-based communication solution on a converged network. Cisco offers a complete portfolio of IP telephony and other unified communications products designed for small businesses. Cisco 220 Series Switches have been rigorously tested to help ensure easy integration and full compatibility with these and other vendor products.
Raising the Bar for Smart Switches

Smart switches are typically priced low but are limited in functionality and scalability. Cisco 220 Series Smart Plus Switches raise the bar for the smart switches by providing additional features and enhancements, including: A higher level of security and intelligence.

ACLs and flow-based QoS give you more control over network performance, maintain the integrity of key business information, and can enable higher network efficiency. Simple and flexible management.

Cisco 220 Series Switches are easy to deploy and use, not only for small, self-installed deployment by non-IT professionals, but also for mid-scale deployment by IT engineers. These switches provide more management options like Cisco CLI, Simple Network Management Protocol (SNMP), Cisco Prime™ LAN Management System (LMS) integration, besides the intuitive, web-based interface and Cisco FindIT utility. Switch Comparison

SF220-48 SF220-48P SG220-50 SG220-50P Form Factor Desktop, Rackmount Desktop, Rackmount Desktop, Rackmount Desktop, Rackmount Ports 48 x 10/100 + 2 x combo Gigabit SFP 48 x 10/100/1000 + 2 x combo Gigabit SFP Number of PoE Ports   48   48 Power Dedicated to PoE   375 watts   375 watts Features Layer 2 switching, DHCP support, BOOTP support, VLAN support, IGMP snooping, IGMP Querier, Syslog support, DoS attack prevention, port mirroring, DiffServ support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, IPv6 support, SNTP support, STP support, RSTP, MSTP, TFTP support, HTTPS, QoS, acces control list, QinQ VLAN, guest VLAN, auto voice VLAN, GVRP/GARP, BPDU Guard, SSH, SSL, Jumbo Frames support, MLD snooping, SNMP, RMON, SNTP, Cisco Discovery Protocol Status indicators Link activity, port transmission speed, system Link activity, port transmission speed, system, PoE Link activity, port transmission speed, system Link activity, port transmission speed, system, PoE Jumbo frame support 9KB 9KB 9KB 9KB Performance Switching capacity : 10.12 Mpps : Forwarding performance (64-byte packet size) : 13.6 Gbps Switching capacity : 74.41 Mpps : Forwarding performance (64-byte packet size) : 100 Gbps Power Supply 1 internal 1 internal 1 internal 1 internal Fanless     Physical Specifications 440(w) x 44(h) x 201(d)mm 440(w) x 44(h) x 350(d)mm 440(w) x 44(h) x 201(d)mm 440(w) x 44(h) x 350(d)mm   Buy Buy Buy Buy

HPE OfficeConnect 1820-48G-PoE+ J9984A 48 Port PoE+ Gigabit  devices are basic, smart-managed, fixed-configuration Gigabit Ethernet Layer 2 switches designed for small businesses looking for key features in an easy-to-administer solution.

The HPE 1820-48G-PoE+ J9983A 48 Port Smart Managed Switch offers more choice and flexibility for smaller organisations that require ease of use and lower Total Cost of Ownership (TCO), while delivering better network performance. They are smart-managed, fixed configuration, Gigabit Ethernet Layer 2 switches in an easy-to-administer solution that have the latest energy-saving capabilities. These switches are plug-and-play out of the box, where network operation can be fine-tuned through features available from a simple Web browser-based GUI, when needed.

Features:
Smart-managed Layer 2 switch with 48 10/100/1000 ports
24 Ports of PoE/PoE+ with a power budget of 370W
Four true non combo 1000/100 SFP ports for fibre connectivity.
Features an intuitive Web management interface with an enhanced navigation pane for easy management of devices by non-technical users 
Includes the latest energy-savings capabilities, including Energy Efficient Ethernet (IEEE), idle-port power down and PoE Port Scheduler
Traffic prioritisation provides time sensitive packets (like VoIP and video) with priority over other traffic based on DSCP or IEEE 802.1p classification
HPE 1820-48G-PoE+: 48 x RJ-45 autosensing 10/100/1000 ports
4 non combo 1000/100 SFP ports for fibre connectivity
24 Ports 802.3at PoE+
370 Watts PoE Budget
Easy-to-Use, Simple to Deploy and Manage

The HPE 1820-48G-PoE+ Switch features an intuitive Web management interface with an enhanced navigation pane for easy management of devices by non-technical users, ideal for organisations that require simplicity.

Customisable features include VLANs, Spanning Tree, Link aggregation trunking, and IGMP Snooping. All models include Rapid Spanning Tree Protocol (RSTP) and DSCP QoS policies.



Energy Efficiency and Lower TCO

The HPE 1820-48G-PoE+ Switch includes the latest energy-savings capabilities, including Energy Efficient Ethernet (IEEE), idle-port power down and PoE Port Scheduler.


Quality of Service (QoS)

The HPE 1820-48G-PoE+ Switch traffic prioritisation provides time sensitive packets (like VoIP and video) with priority over other traffic based on DSCP or IEEE 802.1p classification. Packets are mapped to eight hardware queues for more effective throughput.

Broadcast control allows limiting of broadcast traffic rate, to reduce unwanted network broadcast traffic.

IEEE 802.11p/Q delivers data to devices based on the priority and type of traffic.

Management

The HP 1820-48G-PoE+ Switch is a basic, smart managed, fixed-configuration PoE+ Gigabit Ethernet Layer 2 switch designed for Small businesses looking for key features in an easy to administer solutuion



Quality of Service (QoS)

Customisable features include VLANs, Rapid Spanning Tree, IGMP Snooping, Link AggregationTrunking and DSCP QOS Policies



Security

Secure Sockets Layer (SSL) encrypts all HTTP traffic, allowing secure access to the browser -based management GUI in the switch



Performance

Half-/full-duplex auto-negotiating capability on every port doubles the throughput of every port. IGMP snooping improves network performance through multicast filtering, instead of flooding traffic to all ports



Layer 2 switching and convergence

VLAN support and tagging supports up to 64 port based VLANs and dynamic configuration of IEEE 802.1Q VLAN tagging, providing security between workgroups



JG914A
1620 48G 9981A
1820 48G J9984A
1820 48G PoE+ JL171A
1850 48G 2XGT Form Factor Rackmount Rackmount Rackmount Rackmount Switching Capacity 96 Gbps 104 Gbps 104 Gbps 176 Gbps Predominant Port Type 1 GbE Gigabit Copper 1 GbE Gigabit Copper 1 GbE Gigabit Copper 1 GbE Gigabit Copper Port Count 48 48 48 48 Uplink Speed/Media N/A 4 SFP 100/1000 Mbps ports 4 SFP 100/1000 Mbps ports 4 RJ-45 1/10GBASE-T ports PoE/PoE+ Ports N/A N/A 24 N/A PoE Budget N/A N/A 370 W PoE+ N/A Management Web Managed Smart Managed Smart Managed Smart Managed Functionality Layer 2 Only Layer 2 Only Layer 2 Only Layer 2 Only Dimensions (inches) 17.32(w) x 9.37(d) x 1.73(h) 17.42(w) x 9.69(d) x 1.73(h) 17.42(w) x 12.7(d) x 1.73(h) 17.42(w) x 9.7(d) x 1.73(h)

The Dell Networking X1052 is a 48 Port smart managed 1GbE Ethernet switch with 4x 1GbE SFP Ports designed for small and medium businesses who crave enterprise-class network control fused with consumer-like ease.  Setup and management are greatly simplified with an intuitive GUI and hardware design.

Practical innovations for small networks :- Powerful tools inside an elegant interface with app-like functionality make X-Series switches a pleasure to use. Familiar commands and alerts similar to PCs and servers means there is less jargon to learn and more knowledge to gain.

Sleek navigation with efficient and instinctual work flow :- The design of everything from navigation and clicks to menu structures and help tips was inspired by the way IT pros think and work. Streamlined tools, step-by-step wizards and a concise, informative dashboard make switch configuration and calibration fast and accurate. Common tasks, alerts, port status and network visualization are on one beautiful dashboard screen.

Unmatched traffic visibility and real-time control :- Optimize cloud services and onsite network applications with security and traffic priority features. See network traffic and move from monitoring to resolving in one continuous sequence. Unique multi-port selection for batch routines plus port profiles for common devices eliminate extra steps and configuration errors.

Lifetime Limited Warranty :- Dell Networking X-series switches are backed by an industry leading, lifetime warranty guaranteeing basic hardware service. X-series switches not only provide the quality, reliability and capability you expect from Dell, but also peace of mind that comes with a true lifetime warranty

Key features 
Rack width 48-port switch with four dedicated 10GbE SFP+ uplink ports
Layer 2+ IPV4 and IPV6 functionality including static routing
Revolutionary GUI design for ease of setup and “actionable monitoring”
Powerful tools inside an elegant interface with app-like functionality
Streamlined tools, step-by-step wizards and a customizable dashboard
Common tasks, alerts, port status and network visualization on a single dashboard » Optimize cloud services and onsite network applications with security and traffic priority features
See network traffic and move from monitoring to resolving in one continuous sequence
Multi-port selection for batch routines and port profiles for common devices eliminate extra steps and configuration errors
Dell Fresh Air 2.0 capable performance with energyefficient operation
Patented locking plug and console port

The T1600G-52PS provides 48 10/100/1000Mbps RJ45 Ports which support 802.3at/af-compliant PoE, with a total PoE power supply up to 384W, powerful and ­flexible enough for users to deploy wireless access points or IP-based network surveillance cameras. The switch is also equipped with 4 Gigabit SFP slots, expanding your network fl­exibly. In addition, it provides high performance, powerful L2 and L2+ features like static routing, enterprise-level QoS, and useful security strategies.

Static Routing helps route internal traffic for more efficient use of network resources. The Storm Control feature protects against Broadcast, Multicast and Unknown unicast Storm. 802.1X and Radius Authentication allows network client to be authenticated through external Radius Servers. Quality of Service (QoS, L2 to L4) provides enhanced traffic management capabilities to move your data smoother and faster. Moreover, the easy-to-use web management interfaces, along with SNMP, RMON and Dual Image, mean faster setup and configuration with less downtime. With all these advanced features, the JetStream Gigabit Smart PoE+ Switch T1600G-52PS is an ideal choice for projects or business networks which need PoE function.

Features:

Supports 48 802.3at/af-compliant PoE+ ports with a total power supply of 384W
L2+ Feature——Static Routing, helps route internal traffic for more efficient use of network resources
IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X and Radius Authentication provide you robust security strategies
L2/L3/L4 QoS and IGMP snooping optimize voice and video applications
IPv6 support with dual IPv4/IPv6 stack, MLD snooping, IPv6 neighbour discovery
WEB/CLI managed modes, SNMP, RMON and Dual Image bring abundant management features
IEEE 802.3at/af-compliant Power over Ethernet

The T1600G-52PS provides 48 10/100/1000Mbps RJ45 Ports that support 802.3at/af-compliant PoE, with a total PoE power supply up to 384W to power any 802.3at/af compliant power device. Compact and fl­exible, the T1600G-52PS is ideal to ­flexibly use PoE to deploy wireless access points or IP-based network surveillance cameras for projects or small business networks.

The DGS-1510-52 is the next generation of SmartPro switch. It contains 48 10/100/1000 Mbps ports plus 2 Gigabit SFP ports and 2 10G SFP+ ports.With its 10G SFP+ ports, the DGS-1510-52 is ideal for deployments in the SME/SMB core with its 10G uplinks connecting with servers equipped with 10G port connectivity. For medium to large scale enterprise deployment, it can serve as a good interconnection between the core switch and edge switch

Features:

48 10/100/1000 Mbps Ports
Two 10G SFP+ stacking/uplink ports
Two Gigabit SFP ports
Extensive Layer 2 features
QoS, bandwidth control
Secure your network
IPv6 ready
Versatile management
Layer 3 traffic management
Energy saving

DGS-1510-52: 48 x 1000Base-T 2 x 1GbE SFP
2 x 10GbE SFP+
2 x Smart Fans Featuring D-Link Green 3.0 technology, the DGS-1510 series offers a high level of energy saving and efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv6 management and configurations ensures your network remains protected after the upgrade from IPv4 to IPv6. By offering multiple management options, the DGS-1510 Series allows quick deployment, infrastructure expansion, and seamless function upgrades. Built for small and medium-sized businesses, the DGS-1510 Series provide functionality, security, and manageability for a fraction of the standard cost of ownership. 

Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. 6 units or 288 Gigabit ports can be configured for a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix any models from the DGS-1510 SmartPro series in a single stack to allow simultaneous and easy configuration, management and troubleshooting. 

DGS-1510 series supports virtual stacking via D-Link's Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP. This simplifies management of small workgroups or wiring closets while allowing the network to be scaled to handle increased bandwidth demand. SIM not only reduces the number of IP address needed in your network but also allow switches to be stacked together over Ethernet instead of using physical uplink or stacking ports. This eliminates the need for any specialised stacking cables while at the same time removing the distance barriers that typically limit your topology options when using other stacking technology. 

These switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN and automatically shut down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators and customer service representatives, can quickly discover the type of error on cables and determine the cable quality.

The DGS-1510 Series supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited to VoIP and video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches.

Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Six units or 288 Gigabit ports can be configured as a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 series with cost efficiency. Users can mix from any of the DGS-1510 SmartPro series in a single stack to allow simultaneous and easy configuration, management and troubleshooting. 

Flexibility and scalability

The DGS-1510 series supports virtual stacking via D-Link's Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP. This simplifies management of small workgroups or wiring closets while allowing the network to be scaled to handle increased bandwidth demand. SIM reduces the number of IP address needed in the network and allows switches to be stacked together over Ethernet instead of using physical uplink or stacking ports. This eliminates the need for specialised stacking cables and removes distance barriers that can limit topology options when using other stacking technology. 

Extensive Layer 2 features

The DGS-1510 series switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN and automatically shut down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators and customer service representatives, can quickly discover the type of error on cables and determine the cable quality. 

QoS, bandwidth control

The DGS-1510 series supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited for VoIP and video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches. This technology consolidates data and surveillance video transmission through a single SmartPro switch, sparing businesses the expense of maintaining expensive dedicated hardware and facilities. ASV also ensures the quality of real-time video for monitoring and control without compromising the transmission of conventional network data. The Auto Voice VLAN technology enhances VoIP service by automatically placing voice traffic from an IP phone to an assigned VLAN. With higher priority and an individual VLAN, these features guarantee the quality and security of VoIP traffic. Furthermore, the DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic. As a result, these voice and video packets take precedence over other packets. In addition, with Bandwidth Control, network administrators can reserve bandwidth for important functions that require more bandwidth or might require high priority. 

Secure your network

D-Link's innovative safeguard engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and helps to protect the internal IT network by screening ingress traffic based on MAC or IP addresses. The DGS-1510 series includes ARP Spoofing Prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages to the network. To prevent ARP Spoofing attacks, the switch uses Packet Control ACLs to block invalid packets that contain fake ARP messages. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorised IP assignment. 

IPv6 ready

The DGS-1510 series is IPv6 ready and supports various IPv6 functions such as MLD Snooping, IPv6 ACL/QoS, and IMPBv6 to ensure seamless integration of next generation networks. The DGS-1510 series also supports a IPv4/v6 dual stack function that allows the switch to act as a bridge between IPv4 and IPv6 networks. Finally, all DGS-1510 series are certified to be IPv6 Ready Logo Phase 2, which guarantees interoperability for IPv6 environments. 

Versatile management

The DGS-1510 series provides a D-Link Network Assistant Utility and a web based management interface that enables administrators to remotely control their network down to the port level. The D-Link Network Assistant Utility allows customers to easily discover multiple D-Link SmartPro Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC. It also simplifies the initial setup of the SmartPro Switches. Switches within the same L2 network segment that are connected to the user's PC are displayed on screen for instant access. This allows extensive switch configuration and basic setup of discovered devices including password changes and firmware upgrades. The DGS-1510 Series also supports D-View 6.0 and a fully featured Command Line Interface (CLI) via dedicated out-of-band console port. D-View 6.0 is a Network Management System that allows for the central management of critical network characteristics such as availability, reliability, resilience, and security. CLI management of the switches is possible via console port and Telnet interfaces. This makes it possible to adjust basic settings, passwords, configuration files, and firmware with ease. 

Layer 3 traffic management

The DGS-1510 series supports advanced traffic management features, including static routing. In static routing, IP routes are manually entered into a routing table, which allows for communication between different user groups in different VLAN segments in a network. The switch can directly handle inter VLAN routing using multiple interfaces, making the network run faster and more efficiently. Because the switches can manage internal routing, the network router can be assigned to handle external traffic routing only. 

Energy saving

DGS-1510 switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the 802.3az Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1510 switches offer advanced power-saving settings including port shutoff, LED shutoff, and system hibernation based on custom scheduling profiles.





DGS-1510-28 DGS-1510-28X DGS-1510-52 DGS-1510-52X Form Factor Rackmount Rackmount Rackmount Rackmount Switching Capacity 92 Gbps 128 Gbps 140 Gbps 176 Gbps 100M/1G Copper  (RJ-45) Ports 24 24 48 48 1G/10G SFP/SFP+ Fibre Ports 2/2 0/4 2/2 0/4 PoE/PoE+ Ports N/A N/A N/A N/A PoE Standard N/A N/A N/A N/A PoE Budget N/A N/A N/A N/A PoE Capable Ports N/A N/A N/A N/A Dimensions 440 x 210 x 44 mm 440 x 210 x 44 mm 444 x 250 x 44 mm 440 x 250 x 44 mm  

The DGS-1510-52X is the next generation of SmartPro switch. It contains 48 10/100/1000 Mbps ports plus 4 10G SFP+ ports.With its 10G SFP+ ports, the DGS-1510-52X is ideal for deployments in the SME/SMB core with its 10G uplinks connecting with servers equipped with 10G port connectivity. For medium to large scale enterprise deployment, it can serve as a good interconnection between the core switch and edge switch

Features:

48 10/100/1000 Mbps Ports
Four 10G SFP+ stacking/uplink ports
Extensive Layer 2 features
QoS, bandwidth control
Secure your network
IPv6 ready
Versatile management
Layer 3 traffic management
Energy saving

DGS-1510-52X: 48 x 1000Base-T 4 x 10GbE SFP+
2 x Smart Fans Featuring D-Link Green 3.0 technology, the DGS-1510 series offers a high level of energy saving and efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv6 management and configurations ensures your network remains protected after the upgrade from IPv4 to IPv6. By offering multiple management options, the DGS-1510 Series allows quick deployment, infrastructure expansion, and seamless function upgrades. Built for small and medium-sized businesses, the DGS-1510 Series provide functionality, security, and manageability for a fraction of the standard cost of ownership. 

Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. 6 units or 288 Gigabit ports can be configured for a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix any models from the DGS-1510 SmartPro series in a single stack to allow simultaneous and easy configuration, management and troubleshooting. 

DGS-1510 series supports virtual stacking via D-Link's Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP. This simplifies management of small workgroups or wiring closets while allowing the network to be scaled to handle increased bandwidth demand. SIM not only reduces the number of IP address needed in your network but also allow switches to be stacked together over Ethernet instead of using physical uplink or stacking ports. This eliminates the need for any specialised stacking cables while at the same time removing the distance barriers that typically limit your topology options when using other stacking technology. 

These switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN and automatically shut down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators and customer service representatives, can quickly discover the type of error on cables and determine the cable quality.

The DGS-1510 Series supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited to VoIP and video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches.

Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Six units or 288 Gigabit ports can be configured as a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 series with cost efficiency. Users can mix from any of the DGS-1510 SmartPro series in a single stack to allow simultaneous and easy configuration, management and troubleshooting. 

Flexibility and scalability

The DGS-1510 series supports virtual stacking via D-Link's Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP. This simplifies management of small workgroups or wiring closets while allowing the network to be scaled to handle increased bandwidth demand. SIM reduces the number of IP address needed in the network and allows switches to be stacked together over Ethernet instead of using physical uplink or stacking ports. This eliminates the need for specialised stacking cables and removes distance barriers that can limit topology options when using other stacking technology. 

Extensive Layer 2 features

The DGS-1510 series switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN and automatically shut down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators and customer service representatives, can quickly discover the type of error on cables and determine the cable quality. 

QoS, bandwidth control

The DGS-1510 series supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited for VoIP and video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches. This technology consolidates data and surveillance video transmission through a single SmartPro switch, sparing businesses the expense of maintaining expensive dedicated hardware and facilities. ASV also ensures the quality of real-time video for monitoring and control without compromising the transmission of conventional network data. The Auto Voice VLAN technology enhances VoIP service by automatically placing voice traffic from an IP phone to an assigned VLAN. With higher priority and an individual VLAN, these features guarantee the quality and security of VoIP traffic. Furthermore, the DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic. As a result, these voice and video packets take precedence over other packets. In addition, with Bandwidth Control, network administrators can reserve bandwidth for important functions that require more bandwidth or might require high priority. 

Secure your network

D-Link's innovative safeguard engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and helps to protect the internal IT network by screening ingress traffic based on MAC or IP addresses. The DGS-1510 series includes ARP Spoofing Prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages to the network. To prevent ARP Spoofing attacks, the switch uses Packet Control ACLs to block invalid packets that contain fake ARP messages. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorised IP assignment. 

IPv6 ready

The DGS-1510 series is IPv6 ready and supports various IPv6 functions such as MLD Snooping, IPv6 ACL/QoS, and IMPBv6 to ensure seamless integration of next generation networks. The DGS-1510 series also supports a IPv4/v6 dual stack function that allows the switch to act as a bridge between IPv4 and IPv6 networks. Finally, all DGS-1510 series are certified to be IPv6 Ready Logo Phase 2, which guarantees interoperability for IPv6 environments. 

Versatile management

The DGS-1510 series provides a D-Link Network Assistant Utility and a web based management interface that enables administrators to remotely control their network down to the port level. The D-Link Network Assistant Utility allows customers to easily discover multiple D-Link SmartPro Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC. It also simplifies the initial setup of the SmartPro Switches. Switches within the same L2 network segment that are connected to the user's PC are displayed on screen for instant access. This allows extensive switch configuration and basic setup of discovered devices including password changes and firmware upgrades. The DGS-1510 Series also supports D-View 6.0 and a fully featured Command Line Interface (CLI) via dedicated out-of-band console port. D-View 6.0 is a Network Management System that allows for the central management of critical network characteristics such as availability, reliability, resilience, and security. CLI management of the switches is possible via console port and Telnet interfaces. This makes it possible to adjust basic settings, passwords, configuration files, and firmware with ease. 

Layer 3 traffic management

The DGS-1510 series supports advanced traffic management features, including static routing. In static routing, IP routes are manually entered into a routing table, which allows for communication between different user groups in different VLAN segments in a network. The switch can directly handle inter VLAN routing using multiple interfaces, making the network run faster and more efficiently. Because the switches can manage internal routing, the network router can be assigned to handle external traffic routing only. 

Energy saving

DGS-1510 switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the 802.3az Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1510 switches offer advanced power-saving settings including port shutoff, LED shutoff, and system hibernation based on custom scheduling profiles.





DGS-1510-28 DGS-1510-28X DGS-1510-52 DGS-1510-52X Form Factor Rackmount Rackmount Rackmount Rackmount Switching Capacity 92 Gbps 128 Gbps 140 Gbps 176 Gbps 100M/1G Copper  (RJ-45) Ports 24 24 48 48 1G/10G SFP/SFP+ Fibre Ports 2/2 0/4 2/2 0/4 PoE/PoE+ Ports N/A N/A N/A N/A PoE Standard N/A N/A N/A N/A PoE Budget N/A N/A N/A N/A PoE Capable Ports N/A N/A N/A N/A Dimensions 440 x 210 x 44 mm 440 x 210 x 44 mm 444 x 250 x 44 mm 440 x 250 x 44 mm  

The HPE OfficeConnect 1920S 48G 4SFP PPoE+ JL386A Switch , is designed for small businesses that require enhanced performance to support bandwidth-demanding applications. They are ideal for environments that require advanced features for granular control and where smart-managed flexibility is a must for easy network configuration and management. The switches are advanced smart-managed fixed configuration Gigabit switches that are optimised for small business price/performance.

Features:
48-port Gigabit Advanced Lite Layer 3 Smart Managed PoE+ Switch with a 370W power budget and 4SFP ports
24 RJ-45 auto-negotiating 10/100/1000 PoE+ ports
24 RJ-45 auto-negotiating 10/100/1000 ports
4 SFP 100/1000 Mbps ports
Up to 77.3Mbps of  Throughput
104 Gbps Routing/switching capacity
370W PoE+
Simple and consistent Web interface for easy switch configuration.
Limited Lifetime Warranty 
Simplifies Network Deployment and Management for Small Organisations The HPE OfficeConnect 1920S 48G 4SFP PPoE+ Gigabit Smart Managed Switch features easy-to-use, out of the box, plug-and-play deployment allowing for easy management of the switch - even by nontechnical users - through an intuitive Web GUI; supports HTTP and HTTP Secure (HTTPS)
Keeps Your Business Protected with Enhanced Security Enhanced security features such as Access Control List, IEEE 802.1x and VLANs guard your network from unwanted or unauthorised access.

Management security restricts access to critical configuration commands, offers multiple privilege levels with password protection and supports secure http (https). Delivers Better Performance at a Lower Total Cost of Ownership The HPE OfficeConnect 1920S 48G 4SFP PPoE+ Switch delivers advanced functionality in smart-managed switches, including Layer 3 static routes, rate limiting, link aggregation and IGMP.

Four SFP ports for fibre connectivity provides fibre connections for uplinks and other connections across longer distances than copper cabling can support; SFP ports are in addition to available copper Ethernet ports, providing a higher total .

IEEE 802.3at Power over Ethernet (PoE+) Provides up to 30 W per port, which allows support of the latest PoE+ capable devices such as Video IP phones, wireless access points, and advanced pan/tilt/zoom security cameras, as well as any 15.4 W IEEE 802.3af-compliant end device; mitigates the cost of additional electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments

The HPE OfficeConnect 1920S 48G 4SFP PPoE+ Switch supports Energy Efficient Ethernet for lower power consumption and an enhanced feature set for more robust operation. 

Green features like port shutdown and Energy Efficient Ethernet compliance for greater energy-efficiency.

The switch series is covered by the Limited Lifetime Warranty with 24x7 phone support for 90 days and business hours thereafter.
Click on the product images below to be taken to the range of products

Build a Reliable, Easy-to-Use Basic Business Network at an Affordable Price

In today's hyper connected world, reliable access to network resources is critical to all businesses. However, you also need to invest wisely to stay competitive, knowing how to separate the essential from the extraneous and get the most value for your money. For investment in network infrastructure, building a solid foundation for your business is essential, but it doesn’t mean you need the most advanced feature set on the market.

Specifications at a Glance

48-port 10/100/1000 Mbps switch with 2-Gigabit combo uplinks
48 Ports of Power over Ethernet Plus (PoE+) with 192W of budget
Internal Power Supply
With a Cisco SG250-50HP Smart Switch, you can achieve business-class network performance and security without paying for advanced network management features that you will not use. When you need a reliable solution to share online resources and connect computers, phones, and wireless access points, but low cost is a top priority, Cisco 250 Series Smart Switches provide the ideal solution.



The Cisco SG250-50HP, part of the 250 series, is the next generation of affordable smart switches that combine powerful network performance and reliability with the essential network management features you need for a solid business network. These expandable Gigabit Ethernet switches provide basic management, security, and quality-of-service (QoS) features beyond those of an unmanaged or consumer-grade switch, at a lower cost than managed switches. And with an easy-to-use web user interface andAuto Smartports, you can deploy and configure a complete business network in minutes. Features and Capabilities

Powerful capabilities
In addition to basic management, security, and quality of service (QoS), these switches also support capabilities such as Multiple Spanning Tree (MSTP) and Power over Ethernet Plus (PoE+)
Power over Ethernet Plus (PoE+):
The Cisco SG250-50HP switch simplifies the deployment of IP telephony, wireless, video surveillance, and other solutions by allowing you to send data and power to network endpoints over the single network cable, eliminating the need for separate power supplies or outlets. PoE+ provides up to 30W of power per port, enabling deployments for 802.11ac wireless access points, Pan-Tilt-Zoom (PTZ) IP cameras, videophones, and thin client devices, delivering more flexibility and investment protection.
Easy setup and management
Cisco's intuitive, browser-based user interface is now even more user-friendly, with simple mode and a configuration wizard for common configurations. The switches also come with a USB port for easier file management.
Performance and reliability
The 250 Series is designed and tested to deliver the high performance and reliability you would expect from Cisco switches, so you can enjoy speedy file transfers and keep vital business applications available.
Energy efficiency
Rich energy-saving features are embedded across the portfolio, including energy-detect, cable length detection, and Energy Efficient Ethernet (EEE). All these provide an eco-friendly and cost-effective solution without compromising performance.
Peace of mind
All switches come with a limited lifetime warranty and include one year of technical support and free software fixes for the term of the warranty.
New simplified web GUI and configuration wizards for most intuitive management
Cisco® Smart Network Application (SNA) for network-level management
Cisco FindIT Network Manager
Cisco Network Plug and Play (PnP)
Cisco Active Advisor for inventory, advisory, and life-cycle management
New USB port added for easy image and configuration transfer




Reliable SMB network foundation



Switch Comparison

SF250-48 SF250-48HP SG250-50 SG250-50HP SG250-50P Form Factor Rackmount Rackmount Rackmount Rackmount Rackmount Ports 48 x 10/100, 2 x Gigabit SFP/RJ-45, 2 x Gigabit SFP 48 x 10/100/1000, 2 x Gigabit SFP/RJ-45 Number of PoE+ Ports  - 48 - 48 48 Power Dedicated to PoE  - 195 watts - 192 watts 375 watts Features Layer 2 switching, Layer 3 switching, DHCP support, BOOTP support, VLAN support, IGMP snooping, Syslog support, port mirroring, DiffServ support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, SNTP support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP), Multiple Spanning Tree (MSTP), Trivial File Transfer Protocol (TFTP) support, access control list (ACL) support, quality of service (QoS), jumbo frames support, MLD snooping, SNMP, RMON, SNTP, Cisco Discovery Protocol, Auto SmartPorts Status indicators System, link/speed per port System, link/speed per port System, link/speed per port System, link/speed per port System, link/speed per port Jumbo frame support Performance 17.6-Gbps switching capacity, 13.1-Mpps forwarding performance (64-byte packet size) 100-Gbps switching capacity, 74.41-Mpps forwarding performance (64-byte packet size) Power Supply 1 internal Fanless - - - - Physical Specifications 440(w) x 44(h) x 257(d)mm 440(w) x 44(h) x 350(d)mm 440(w) x 44(h) x 257(d)mm 440(w) x 44(h) x 350(d)mm 440(w) x 44(h) x 350(d)mm   Buy Buy Buy Buy Buy

The NETGEAR® new generation Gigabit 52 port (48 port copper + 4 port fibre) PoE Smart Switch offers powerful L2 features, better PoE functions, and enhanced performance and usability. The GS752TP come with PoE capabilities on all ports, providing hardware investment protections so that the switch can support many more PoE powered devices and new higher-powered devices down the road. It is purposely designed for the converged networks where voice, video, data are all carried on a single network platform for network efficiency, operational cost savings, and ease of management.

The 52-port Gigabit with PoE switch comes with 4 dedicated Gigabit SFP ports for fibre connectivity. The new generation of Gigabit PoE Smart Switch from NETGEAR is the optimised solution providing the best value at an affordable SMB price point.



GS752TP : 48 Port 1000Base-T Gigabit PoE Smart Switch
4 Dedicated SFP Ports
48 PoE ports with first 8 ports supporting PoE+ 384W PoE Budget

Need Fibre Connectivity?

AGM731F

Fibre Gigabit 1000Base-SX (LC) SFP Module



Switch Comparison

GS516TP GS728TP GS728TPP GS752TP Form Factor Rackmount Rackmount Rackmount Rackmount LEDs (System) Power, Fan, PoE Max Power, Fan, PoE Max Power, Fan, PoE Max Power,
PoE Max 100M/1G Copper  (RJ-45) Ports 16 24 24 48 1G SFP Fibre Ports N/A 4 (dedicated) 4 (dedicated) 4 (dedicated) PoE/PoE+ Ports 8 x PoE 802.3af 24 x PoE 802.3af of which first 8 are PoE+ 802.3at 24 PoE+ 802.3at 48 x PoE 802.3af of which first 8 are PoE+ 802.3at PoE Budget (PSU/Passthrough) 76W (up to 22W) 192W 384W 384W PoE budget (with EPS) N/A N/A Up to 720W N/A Power Supply 1 internal PSU, fixed 1 internal PSU, fixed 1 internal PSU, fixed 1 internal PSU, fixed   Buy Buy Buy Buy Highlights:

Designed for Converged Network, Big or Small

Gigabit Speed with all ports capable of supporting PoE and the first eight ports supporting PoE+
Auto Voice VLAN for fast and reliable deployment of VoIP
Auto Video VLAN, following the same concept of Auto Voice, help speed up your deployment of IP-based surveillance system
Static routing, helps to route internal traffic for more efficient use of network resources
IGMP and MLD snooping, providing advanced multicast filtering
Build a future-proof network with NETGEAR

Solid performance with non-blocking architecture, 8K MAC addresses, 256 VLANs, 480 shared ACL entries, 32static routes, and 1,024 Multicast Groups
Comprehensive IPv6 supporting management, QoS and ACL, ensuring investment protection and a smooth migration to IPv6-based network
4 Dedicated SFPs, not only providing fibre uplinks, but also uplink redundancy and failover, improving reliability and availability for network virtualisation
Energy Efficient Ethernet (IEEE802.3az) support for more energy saving in the future when more EEE-compliant end devices come to market
Advanced QoS with IPv4/IPv6 ingress traffic filtering (ACLs) and prioritisation (QoS - Diff Serv)
Dynamic VLAN assignment for easy user authentication and location-independent access to network

Network Development Made Easy

Auto Voice VLAN for easy development of VoIP
Auto Video for simple deployment of IP Surveillance
ACL Wizard for a guided tour to set up your network access control
Smart Control Center, a powerful tool for multi-switch discovery, deployment, monitoring and firmware upgrade
PoE Timer for scheduling on/off time of your PoE powered devices.
Smart IT, not Big IT

Easy to manage via web-Based Management GUI or Smart Control Center for multi-switch deployment
Standard-based technology, ensuring interoperability with any standard-based devices in the existing network
Dual firmware images, improving reliability and uptime to your network
Worry-free with NETGEAR ProSAFE Lifetime Hardware Warranty
Assist with customer deployment with 1-year Free 24x7 Advanced Technical Support

Build a Reliable, Easy-to-Use Basic Business Network at an Affordable Price

In today's hyper connected world, reliable access to network resources is critical to all businesses. However, you also need to invest wisely to stay competitive, knowing how to separate the essential from the extraneous and get the most value for your money. For investment in network infrastructure, building a solid foundation for your business is essential, but it doesn’t mean you need the most advanced feature set on the market.

Specifications at a Glance

48-port 10/100 Mbps switch
2 Gigabit copper/SFP combo + 2 SFP ports
48 Ports of Power over Ethernet Plus (PoE+) with 195W of budget
Internal Power Supply
With a Cisco SF250-48HP Smart Switch, you can achieve business-class network performance and security without paying for advanced network management features that you will not use. When you need a reliable solution to share online resources and connect computers, phones, and wireless access points, but low cost is a top priority, Cisco 250 Series Smart Switches provide the ideal solution.



The Cisco SF250-48HP, part of the 250 series, is the next generation of affordable smart switches that combine powerful network performance and reliability with the essential network management features you need for a solid business network. These expandable Gigabit Ethernet switches provide basic management, security, and quality-of-service (QoS) features beyond those of an unmanaged or consumer-grade switch, at a lower cost than managed switches. And with an easy-to-use web user interface andAuto Smartports, you can deploy and configure a complete business network in minutes. Features and Capabilities

Powerful capabilities
In addition to basic management, security, and quality of service (QoS), these switches also support capabilities such as Multiple Spanning Tree (MSTP) and Power over Ethernet Plus (PoE+)
Power over Ethernet Plus (PoE+):
The Cisco SF250-48HP switch simplifies the deployment of IP telephony, wireless, video surveillance, and other solutions by allowing you to send data and power to network endpoints over the single network cable, eliminating the need for separate power supplies or outlets. PoE+ provides up to 30W of power per port, enabling deployments for 802.11ac wireless access points, Pan-Tilt-Zoom (PTZ) IP cameras, videophones, and thin client devices, delivering more flexibility and investment protection.
Easy setup and management
Cisco's intuitive, browser-based user interface is now even more user-friendly, with simple mode and a configuration wizard for common configurations. The switches also come with a USB port for easier file management.
Performance and reliability
The 250 Series is designed and tested to deliver the high performance and reliability you would expect from Cisco switches, so you can enjoy speedy file transfers and keep vital business applications available.
Energy efficiency
Rich energy-saving features are embedded across the portfolio, including energy-detect, cable length detection, and Energy Efficient Ethernet (EEE). All these provide an eco-friendly and cost-effective solution without compromising performance.
Peace of mind
All switches come with a limited lifetime warranty and include one year of technical support and free software fixes for the term of the warranty.
hr/ New simplified web GUI and configuration wizards for most intuitive management
Cisco® Smart Network Application (SNA) for network-level management
Cisco FindIT Network Manager
Cisco Network Plug and Play (PnP)
Cisco Active Advisor for inventory, advisory, and life-cycle management
New USB port added for easy image and configuration transfer




Reliable SMB network foundation



Switch Comparison

SF250-48 SF250-48HP SG250-50 SG250-50HP SG250-50P Form Factor Rackmount Rackmount Rackmount Rackmount Rackmount Ports 48 x 10/100, 2 x Gigabit SFP/RJ-45, 2 x Gigabit SFP 48 x 10/100/1000, 2 x Gigabit SFP/RJ-45 Number of PoE+ Ports  - 48 - 48 48 Power Dedicated to PoE  - 195 watts - 192 watts 375 watts Features Layer 2 switching, Layer 3 switching, DHCP support, BOOTP support, VLAN support, IGMP snooping, Syslog support, port mirroring, DiffServ support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, SNTP support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP), Multiple Spanning Tree (MSTP), Trivial File Transfer Protocol (TFTP) support, access control list (ACL) support, quality of service (QoS), jumbo frames support, MLD snooping, SNMP, RMON, SNTP, Cisco Discovery Protocol, Auto SmartPorts Status indicators System, link/speed per port System, link/speed per port System, link/speed per port System, link/speed per port System, link/speed per port Jumbo frame support Performance 17.6-Gbps switching capacity, 13.1-Mpps forwarding performance (64-byte packet size) 100-Gbps switching capacity, 74.41-Mpps forwarding performance (64-byte packet size) Power Supply 1 internal Fanless - - - - Physical Specifications 440(w) x 44(h) x 257(d)mm 440(w) x 44(h) x 350(d)mm 440(w) x 44(h) x 257(d)mm 440(w) x 44(h) x 350(d)mm 440(w) x 44(h) x 350(d)mm   Buy Buy Buy Buy Buy

The Cisco SF220-48P is a 48 Port 10/100 Smart Plus Switch with 2 Gigabit Combo Ports (RJ45 + SFP) and 48 ports of PoE is an affordable smart switch equipped with enhanced security, intelligence and performance. For small and medium-sized businesses running on a tight budget but still requiring a solid network, these switches deliver an excellent combination of features, performance and ease of use to build a fast, reliable and highly secure network - at a lower price than managed switches.

Cisco 220 Series: Solid Business Network at an Affordable Price
Enjoy a higher level of management, security and scalability without the cost complexity of a managed switch

Cisco Small Business 220 Series Smart Plus Switches bridge the gap between managed and smart switches to offer customers the best of both worlds. Combining powerful performance with reliability, they provide the higher levels of security, management, and scalability you expect from managed switches, affordably priced like smart switches.

Choose the Cisco SF220-48P for:

48 Fast Ethernet 10/100 Ports with 2 Gigabit Ethernet Combo Ports (RJ45/SFP)
48 Ports of PoE (Ports 1-4 PoE+ Capable) with a Budget of 375W
Power over Ethernet (PoE): PoE and PoE+ streamline the deployment for wireless access points, IP telephony and video surveillance by allowing power and data to run over a single network cable.
Support: with Cisco Small Business Support Service and a limited lifetime warranty.
Value: Enjoy the affordability of smart switches while getting the higher levels of security, management and scalability only found in managed switches.
Enhanced security: Cisco switches offer several security capabilities, including advanced threat defense, access control lists (ACLs), 802.1x, and many others. You can be confident that you have the protection you need.
Easy setup and management: Intuitive browser–based tools simplify setup and configuration. Advanced command line interface (CLI) management options are also available.
Business Applications

With Cisco 220 Series Switches, you can not only build an efficient and reliable network to connect the workforce, but also advanced solutions to deliver data, voice, and video services on a converged infrastructure. Get the best value for your money by improving the productivity of employees. Possible deployment scenarios include:

Secured desktop connectivity Cisco 220 Series Switches can quickly and reliably connect employees working in small offices with each other and with all of the servers, printers, and other devices they use. With device authentication and access control, you can maintain the integrity of key business information while keeping you employees connected and productive.
Flexible wireless connectivity. With comprehensive security and quality of service (QoS) capabilities, Cisco 220 Series Switches provide a solid foundation to add business-grade wireless to the network. You can easily move up to a cutting-edge 802.11ac wireless access point to increase workforce productivity without worrying about power and throughput.
Unified communications. The Cisco 220 Series Switches provide QoS features to automatically prioritize delay-sensitive traffic to help you easily deploy an IP-based communication solution on a converged network. Cisco offers a complete portfolio of IP telephony and other unified communications products designed for small businesses. Cisco 220 Series Switches have been rigorously tested to help ensure easy integration and full compatibility with these and other vendor products.
Raising the Bar for Smart Switches

Smart switches are typically priced low but are limited in functionality and scalability. Cisco 220 Series Smart Plus Switches raise the bar for the smart switches by providing additional features and enhancements, including: A higher level of security and intelligence.

ACLs and flow-based QoS give you more control over network performance, maintain the integrity of key business information, and can enable higher network efficiency. Simple and flexible management.

Cisco 220 Series Switches are easy to deploy and use, not only for small, self-installed deployment by non-IT professionals, but also for mid-scale deployment by IT engineers. These switches provide more management options like Cisco CLI, Simple Network Management Protocol (SNMP), Cisco Prime™ LAN Management System (LMS) integration, besides the intuitive, web-based interface and Cisco FindIT utility. Power Over Ethernet Plus. PoE+

streamlines the deployment for wireless access points, IP telephony, and video surveillance by allowing power and data to run over a single network cable. In addition to PoE support on all copper ports, Cisco 220 Series Switches also support PoE+ on selected ports, which is up to 30 watts of power per port. PoE+ can enable deployments for 802.11ac wireless access points, Pan Tilt Zoom (PTZ) IP cameras, videophones, and thin client devices, delivering more flexibility and investment protection. Switch Comparison

SF220-48 SF220-48P SG220-50 SG220-50P Form Factor Desktop, Rackmount Desktop, Rackmount Desktop, Rackmount Desktop, Rackmount Ports 48 x 10/100 + 2 x combo Gigabit SFP 48 x 10/100/1000 + 2 x combo Gigabit SFP Number of PoE Ports   48   48 Power Dedicated to PoE   375 watts   375 watts Features Layer 2 switching, DHCP support, BOOTP support, VLAN support, IGMP snooping, IGMP Querier, Syslog support, DoS attack prevention, port mirroring, DiffServ support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, IPv6 support, SNTP support, STP support, RSTP, MSTP, TFTP support, HTTPS, QoS, acces control list, QinQ VLAN, guest VLAN, auto voice VLAN, GVRP/GARP, BPDU Guard, SSH, SSL, Jumbo Frames support, MLD snooping, SNMP, RMON, SNTP, Cisco Discovery Protocol Status indicators Link activity, port transmission speed, system Link activity, port transmission speed, system, PoE Link activity, port transmission speed, system Link activity, port transmission speed, system, PoE Jumbo frame support 9KB 9KB 9KB 9KB Performance Switching capacity : 10.12 Mpps : Forwarding performance (64-byte packet size) : 13.6 Gbps Switching capacity : 74.41 Mpps : Forwarding performance (64-byte packet size) : 100 Gbps Power Supply 1 internal 1 internal 1 internal 1 internal Fanless     Physical Specifications 440(w) x 44(h) x 201(d)mm 440(w) x 44(h) x 350(d)mm 440(w) x 44(h) x 201(d)mm 440(w) x 44(h) x 350(d)mm   Buy Buy Buy Buy

D-Link’s DGS-1210-52MP Gigabit PoE Smart+ Switch with 4 Fibre Uplinks integrates advanced management as well as security functions that provide performance and scalability. Management options for the switch include SNMP, Web Management, D-Link Network Assistant Utility. 

The DGS-1210-52MP uses Auto Voice VLAN, ensuring bandwidth is prioritised for a smoother voice performance. The DGS-1210-52MP features a smart fan design that powers on after the switch reaches a certain temperature, saving energy and cutting costs without sacrificing performance.

The DGS-1210-52MP is a high power budget PoE-enabled switch for businesses looking to power VoIP phones, wireless access points or network cameras. The DGS- 1210-52MP is a Smart PoE+ switch with power budgets of 193W that provides 48 PoE-enabled ports with 8 ports that support up to 30W of power output following IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs.

DGS-1210-52MP: 40 x 1000Base-T 802.3af PoE 8 x 1000Base-T 802.3at PoE 4 x 1GbE SFP 370W PoE budget Green Technology

Power saving via the following features: Link Status detection
LED Shut-Off
Port Shut-Off
System Hibernation
Time-based PoE

Security Features
Access Control List secures network
D-Link Safeguard Engine protects CPU from Broadcast/Multicast/Unicast Flooding
Port Security supports 64 MACs per port
ARP Spoofing Prevention
Intuitive Management
D-Link Network Assistant Utility or Web-based GUI
Built-in SNMP MIB for remote NMS (D-View 6.0)
Compact CLI through Telnet
Advanced Features
Auto Surveillance VLAN
Loopback Detection automatically disables a port when a loop is detected
Cable Diagnostics allows administrators to determine cable status
SFP ports for flexibility
Auto MDI/MDIX

The NETGEAR Insight Managed Smart Cloud GC752XP is the first 52-port Gigabit Ethernet PoE+ Switch from NETGEAR with anytime, anywhere remote/cloud management. Using either the NETGEAR Insight mobile app or the Insight Cloud Portal you can easily setup, monitor and manage your Insight Managed Switches, Wireless Access Points, and Business-class ReadyNAS storage. The NETGEAR GC752XP features 48 copper Gigabit Ethernet PoE+ ports, 2 SFP 1G and 2 SFP+ 10G Fibre ports for maximum flexibility and connectivity in your network. With its remote cloud manageability, 505W PoE total budget, and advanced L2+/L3 Lite features, it's the most versatile switch on the market for any environment!



Experience the most versatile and easy to manage switches in the market

As a leading provider of network equipment for SMBs, NETGEAR® understands the importance of reliable and high performance networks. With the growth of virtualisation, cloud-based services and applications like VoIP, video streaming and IP surveillance, SMB networks need to extend beyond simple reliability to simpler management and remote monitoring to ensure your network is “always up”. NETGEAR also understands that small business owners shouldn’t have to understand networking and IT; they need a network that’s easy-to-setup and is reliable, so they can focus on their business, not their network. To that end, NETGEAR is introducing our most versatile and easy-to-manage switches ever, NETGEAR Insight Managed Smart Cloud switches.

Features:

Solid performance with a non-blocking architecture (up to 140Gb/s network fabric)
Comprehensive IPv6 management, QoS and ACL support, ensuring investment protection and a smooth migration to IPv6-based networking
The GC752XP provides PoE+ (802.3at) on all Gigabit Ethernet ports, with advanced per-port PoE controls (set specific power budget per-port in addition to automatic class-defined) and PoE scheduling plus timers
505W PoE+ power budget, with the flexibility to serve power-hungry devices such as 11ac Wireless APs, VoIP voice and video phones, security/surveillance cameras including PTZ, and other IoT devices Dedicated SFP ports support long-distance uplinks or can be used for redundancy and failover, improving reliability and availability for network virtualisation
Energy Efficient Ethernet (IEEE 802.3az) support for more energy savings in the future when more EEE-compliant end devices come to market
Advanced QoS with IPv4/IPv6 ingress traffic filtering (ACLs) and prioritisation (QoS)
Dynamic VLAN assignment for easy user authentication and location-independent access to network
IPV4 & IPV6 static routing allow for a simple way to provide segmentation of the network with internal routing through the switch – reserving the router for external traffic routing only, making the entire network more efficient.
Highlights

One-touch network connectivity and management with the NETGEAR Insight app

The NETGEAR Insight Managed Smart Cloud Switches fundamentally change the way you think of networks and IT. Using the NETGEAR Insight app with Insight Managed Smart Cloud Switches and Wireless Access Points provides:

Instant in-app discovery & set-up
Centralised network configuration polices with auto-join and configure (zero-touch provisioning)
Multi-site/remote network management and monitoring with single pane-of-glass view
No additional cloud controller, appliance, network manager, or PC/server is necessary
 

Insight  

Remote monitoring and management from the palm of your hand!

With the NETGEAR Insight app, you can setup, manage, and monitor your networks from anywhere, anytime, from the palm of your hand!

Network-centric configuration and management

NETGEAR Insight Managed Switches and Wireless Access Points using the NETGEAR Insight app allow for cross-device automated configuration of VLANs, QoS, ACLs, LAGs, and PoE settings. Auto-join and configure (zerotouch provisioning) allows for additional devices to be added seamlessly.



Port Configuration and Monitoring Network Dashboard Single Pane-of-Glass View of Multiple networks/locations Fully-integrated cloud-manageable devices

Insight Managed switches are fully-integrated, cloud-manageable devices. Just connect and go.

Clean, sleek and whisper quiet design

Insight Managed Smart Cloud switches have a modern, clean design, with a full complement of LEDs including power, cloud connection, PoE max, and fan status, as well as per port connection/link status and PoE power status. All models have whisper quiet fan(s), a Kensington lock receptacle, and are rack-mountable with the included rack-mount kit.

Example Application

In a Business/Retail Environment Netgear GC728X Netgear  GC728XP Netgear GC752X Netgear GC752XP Form Factor Rackmount, Desktop Rackmount, Desktop Rackmount, Desktop Rackmount, Desktop LEDs (System) Cloud, Power, Fan Cloud, Power, PoE Max Cloud, Power, Fan Cloud, Power, PoE Max, Fan 100M/1G Copper  (RJ-45) Ports 24 24 48 48 1G SFP Fibre Ports 2 (dedicated) 2 (dedicated) 2 (dedicated) 2 (dedicated) 10G SFP+ Fibre Ports 2 (dedicated) 2 (dedicated) 2 (dedicated) 2 (dedicated) PoE/PoE+ Ports (Budget) N/A 24 PoE (390W) N/A 48 PoE+ (505W) LEDs (Per Port) Speed/Link/Activity Speed/Link/ Activity, PoE Speed/Link/ Activity Speed/Link/ Activity, PoE Power Supply 1 internal PSU, fixed 1 internal PSU, fixed 1 internal PSU, fixed 1 internal PSU, fixed Fans 1 internal fan, fixed 2 internal fans, fixed 1 internal fan, fixed 3 internal fans, fixed   Buy Buy Buy Buy

* The Insight Cloud Portal is only available with the Insight Premium subscription.

The HPE OfficeConnect 1850 48 Port Smart Managed  Gigabit Switch offers choice and flexibility for smaller organisations that require ease of use and affordable high performance connectivity. They come in an easy-to-administer solution that has the latest energy-saving capabilities. These switches are Plug-and-Play out of the box, where network operation can be fine-tuned through a simple Web browser-based GUI, when needed.
Features:

48 Gigabit 10/100/1000 Ports
4 x 10 Gigiabit RJ45 Ports 
Performance and reliability
Easy-to-use, simple to deploy and manage
Energy efficiency and lower TCO
Quality of Service (QoS)
HPE 1850-48G 4XGT : 48 x RJ-45 auto-negotiating 10/100/1000 ports
4 x RJ-45 1/10GBASE-T ports
Easy-to-use, simple to deploy and manage The HPE OfficeConnect 1850 Switch series features an intuitive Web management interface with an enhanced navigation pane for easy management of devices by non-technical users. It is ideal for organisations that require simplicity. Customisable features include VLANs, Spanning Tree, Link aggregation, and IGMP Snooping.


Energy efficiency and lower TCO The HPE OfficeConnect 1850 Switch series include the latest energy-savings capabilities, including Energy Efficient Ethernet (IEEE) and idle-port power down


Quality of Service (QoS) The HPE OfficeConnect 1850 Switch series traffic prioritisation provides time sensitive packets (like VoIP and video) with priority over other traffic based on DSCP or IEEE 802.1p classification. Packets are mapped to eight hardware queues for more effective throughput. Broadcast control allows limiting of broadcast traffic rate, to reduce unwanted network broadcast traffic. IEEE 802.11p/Q delivers data to devices based on the priority and type of traffic.


JG9981A
1820 48G JL171A
1820 48G 4XGT JL173A
1820 48G 4XGT PoE+ JL382A
1920S 48G 4SFP Form Factor Rackmount Rackmount Rackmount Rackmount Switching Capacity 104 Gbps 176 Gbps 176 Gbps 104 Gbps Predominant Port Type 1 GbE Gigabit Copper 1 GbE Gigabit Copper 1 GbE Gigabit Copper 1 GbE Gigabit Copper Port Count 48 48 48 48 Uplink Speed/Media 4 SFP 100/1000 Mbps ports 4 RJ-45 1/10GBASE-T ports 4 SFP 100/1000 Mbps ports 4 SFP 100/1000 Mbps ports PoE/PoE+ Ports N/A N/A 24 N/A PoE Budget N/A N/A 370 W PoE+ N/A Management Smart Managed Smart Managed Smart Managed Smart Managed Functionality Layer 2 Only Layer 2 Only Layer 2 Only Layer 3 Lite

The Dell Networking X1052P is a 48 port smart managed 1GbE Ethernet switch designed for small and medium businesses who crave enterprise-class network control fused with consumer-like ease. The X1052P has 24 Ports of PoE/PoE+ with a budget of up to 369W. Setup and management are greatly simplified with an intuitive GUI and hardware design. 

Practical innovations for small networks :- Powerful tools inside an elegant interface with app-like functionality make X-Series switches a pleasure to use. Familiar commands and alerts similar to PCs and servers means there is less jargon to learn and more knowledge to gain. Connect, auto-configure, and power VoIP phones and wireless access points with PoE.

Sleek navigation with efficient and instinctual work flow :- The design of everything from navigation and clicks to menu structures and help tips was inspired by the way IT pros think and work. Streamlined tools, step-by-step wizards and a concise, informative dashboard make switch configuration and calibration fast and accurate. Common tasks, alerts, port status and network visualization are on one beautiful dashboard screen. 

Unmatched traffic visibility and real-time control :- Optimize cloud services and onsite network applications with security and traffic priority features. See network traffic and move from monitoring to resolving in one continuous sequence. Unique multi-port selection for batch routines plus port profiles for common devices eliminate extra steps and configuration errors. 

Lifetime Limited Warranty :- Dell Networking X-series switches are backed by an industry leading, lifetime warranty guaranteeing basic hardware service. X-series switches not only provide the quality, reliability and capability you expect from Dell, but also peace of mind that comes with a true lifetime warranty.

Key features 
Rack width, 1GbE 48 port switch with Power over Ethernet (PoE/PoE+)
Layer 2+ IPV4 and IPV6 functionality including static routing
Revolutionary GUI design for ease of setup and “actionable monitoring”
Powerful tools inside an elegant interface with app-like functionality
Streamlined tools, step-by-step wizards and a customizable dashboard
Common tasks, alerts, port status and network visualization on a single dashboard » Optimize cloud services and onsite network applications with security and traffic priority features
See network traffic and move from monitoring to resolving in one continuous sequence
Multi-port selection for batch routines and port profiles for common devices eliminate extra steps and configuration errors
Dell Fresh Air 2.0 capable performance with energyefficient operation
Patented locking plug and console port

The ProSAFE S3300-52X 52 Port Gigabit Stackable Smart Switch is a L2+ web based platform: non-PoE in a 48 port configuration. 4 dedicated 10G ports are included as standard (2 x 10GBase-T and 2 x SFP+) for stacking and/or uplinks to aggregation layers or storage and server connections.

The Netgear ProSAFE® S3300-52X is a new generation Gigabit Stackable Smart Switches inclusive of 4 10G ports, which can be used for uplinks and/or stacking between other S3300 switches. Dependable switched LAN network design mandates an architecture that can both scale as organisation networks grow-and be flexible enough to provide support for faster server and storage connections needs. As SMBs produce and consume more data, Gigabit to the desktop increasingly needs to be underpinned with 10GbE connectivity to the core to ensure a consistent, seamless user experience. This new generation of switches provides SMB customers with the most cost-effective 10G connections between the access and aggregation layer of the network.


S3300-52X : 52 Port Gigabit Stackable Smart Switch
48 Gigabit Copper Ports
2 Dedicated 10G SFP+ Fibre Ports supporting 10G and 1000M Speeds
2 Dedicated 10GBase-T Copper Ports supporting 10G/1G/100M Speeds
Features:

Auto Voice VLAN for easy development of VoIP
Auto Video for simple deployment of IP surveillance
Static routing, helps to route internal traffic for more efficient use of network resources
IGMP and MLD snooping, providing advanced multicast filtering
Solid performance with non-blocking architecture, 8K MAC addresses, 256 VLANs, 480 shared ACL entries, 32 static routes, and 1,024 Multicast Groups
Comprehensive IPv6 supporting management, QoS and ACL, ensuring investment protection and a smooth migration to IPv6-based network
Dedicated SFPs instead of combo ports, offering more connectivity ports and providing better value and usability at no extra cost
Energy Efficient Ethernet (IEEE802.3az) support for more energy saving in the future when more EEE-compliant end devices come to market
Advanced QoS with IPv4/IPv6 ingress traffic filtering (ACLs) and prioritisation
Dynamic VLAN assignment for easy user authentication and location-independent access to network
USB for easy access firmware updates




 
S3300-28X 3300-28X-PoE+ S3300-52X S3300-52X-PoE+ Form Factor Rackmount Rackmount Rackmount Rackmount Bandwidth 128Gbps 128Gbps 176Gbps 176Gbps 100M/1G Copper  (RJ-45) Ports 24 24 48 48  10G SFP Fibre Ports  4 (2 copper 2 fibre) (dedicated) 4 (2 copper 2 fibre) (dedicated) 4 (2 copper 2 fibre) (dedicated) 4 (2 copper 2 fibre) (dedicated) PoE/PoE+ Ports N/A 24 PoE+ N/A 48 PoE+ Total PoE power budget (watts), without RPS N/A 195W N/A 390W RPS support: RPS mode, max. PoE power budget with RPS N/A 720W N/A 1440W Dimensions 440 x 257 x 43mm 440 x 257 x 43mm 440 x 257 x 43mm 440 x 345 x 43mm

The Cisco SG220-50P is a 48 Port Gigabit Smart Plus Switch with 2 Gigabit Combo Ports (RJ45 + SFP) and 48 ports of PoE is an affordable smart switch equipped with enhanced security, intelligence and performance. For small and medium-sized businesses running on a tight budget but still requiring a solid network, these switches deliver an excellent combination of features, performance and ease of use to build a fast, reliable and highly secure network - at a lower price than managed switches.

Cisco 220 Series: Solid Business Network at an Affordable Price
Enjoy a higher level of management, security and scalability without the cost complexity of a managed switch

Cisco Small Business 220 Series Smart Plus Switches bridge the gap between managed and smart switches to offer customers the best of both worlds. Combining powerful performance with reliability, they provide the higher levels of security, management, and scalability you expect from managed switches, affordably priced like smart switches.

Choose the Cisco SG220-50P for:

48 Gigabit 10/100/1000 Ports with 2 Gigabit Ethernet Combo Ports (RJ45/SFP)
48 Ports of PoE (Ports 1-4 PoE+ Capable) with a Budget of 375W
Power over Ethernet (PoE): PoE and PoE+ streamline the deployment for wireless access points, IP telephony and video surveillance by allowing power and data to run over a single network cable.
Support: with Cisco Small Business Support Service and a limited lifetime warranty.
Value: Enjoy the affordability of smart switches while getting the higher levels of security, management and scalability only found in managed switches.
Enhanced security: Cisco switches offer several security capabilities, including advanced threat defense, access control lists (ACLs), 802.1x, and many others. You can be confident that you have the protection you need.
Easy setup and management: Intuitive browser–based tools simplify setup and configuration. Advanced command line interface (CLI) management options are also available.
Business Applications

With Cisco 220 Series Switches, you can not only build an efficient and reliable network to connect the workforce, but also advanced solutions to deliver data, voice, and video services on a converged infrastructure. Get the best value for your money by improving the productivity of employees. Possible deployment scenarios include:

Secured desktop connectivity Cisco 220 Series Switches can quickly and reliably connect employees working in small offices with each other and with all of the servers, printers, and other devices they use. With device authentication and access control, you can maintain the integrity of key business information while keeping you employees connected and productive.
Flexible wireless connectivity. With comprehensive security and quality of service (QoS) capabilities, Cisco 220 Series Switches provide a solid foundation to add business-grade wireless to the network. You can easily move up to a cutting-edge 802.11ac wireless access point to increase workforce productivity without worrying about power and throughput.
Unified communications. The Cisco 220 Series Switches provide QoS features to automatically prioritize delay-sensitive traffic to help you easily deploy an IP-based communication solution on a converged network. Cisco offers a complete portfolio of IP telephony and other unified communications products designed for small businesses. Cisco 220 Series Switches have been rigorously tested to help ensure easy integration and full compatibility with these and other vendor products.
Raising the Bar for Smart Switches

Smart switches are typically priced low but are limited in functionality and scalability. Cisco 220 Series Smart Plus Switches raise the bar for the smart switches by providing additional features and enhancements, including: A higher level of security and intelligence.

ACLs and flow-based QoS give you more control over network performance, maintain the integrity of key business information, and can enable higher network efficiency. Simple and flexible management.

Cisco 220 Series Switches are easy to deploy and use, not only for small, self-installed deployment by non-IT professionals, but also for mid-scale deployment by IT engineers. These switches provide more management options like Cisco CLI, Simple Network Management Protocol (SNMP), Cisco Prime™ LAN Management System (LMS) integration, besides the intuitive, web-based interface and Cisco FindIT utility. Power Over Ethernet Plus. PoE+

streamlines the deployment for wireless access points, IP telephony, and video surveillance by allowing power and data to run over a single network cable. In addition to PoE support on all copper ports, Cisco 220 Series Switches also support PoE+ on selected ports, which is up to 30 watts of power per port. PoE+ can enable deployments for 802.11ac wireless access points, Pan Tilt Zoom (PTZ) IP cameras, videophones, and thin client devices, delivering more flexibility and investment protection. Switch Comparison

SF220-48 SF220-48P SG220-50 SG220-50P Form Factor Desktop, Rackmount Desktop, Rackmount Desktop, Rackmount Desktop, Rackmount Ports 48 x 10/100 + 2 x combo Gigabit SFP 48 x 10/100/1000 + 2 x combo Gigabit SFP Number of PoE Ports   48   48 Power Dedicated to PoE   375 watts   375 watts Features Layer 2 switching, DHCP support, BOOTP support, VLAN support, IGMP snooping, IGMP Querier, Syslog support, DoS attack prevention, port mirroring, DiffServ support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, IPv6 support, SNTP support, STP support, RSTP, MSTP, TFTP support, HTTPS, QoS, acces control list, QinQ VLAN, guest VLAN, auto voice VLAN, GVRP/GARP, BPDU Guard, SSH, SSL, Jumbo Frames support, MLD snooping, SNMP, RMON, SNTP, Cisco Discovery Protocol Status indicators Link activity, port transmission speed, system Link activity, port transmission speed, system, PoE Link activity, port transmission speed, system Link activity, port transmission speed, system, PoE Jumbo frame support 9KB 9KB 9KB 9KB Performance Switching capacity : 10.12 Mpps : Forwarding performance (64-byte packet size) : 13.6 Gbps Switching capacity : 74.41 Mpps : Forwarding performance (64-byte packet size) : 100 Gbps Power Supply 1 internal 1 internal 1 internal 1 internal Fanless     Physical Specifications 440(w) x 44(h) x 201(d)mm 440(w) x 44(h) x 350(d)mm 440(w) x 44(h) x 201(d)mm 440(w) x 44(h) x 350(d)mm   Buy Buy Buy Buy

The HPE OfficeConnect 1850 48 Port Smart Managed PoE+ Gigabit Switch offers choice and flexibility for smaller organisations that require ease of use and affordable high performance connectivity. They come in an easy-to-administer solution that has the latest energy-saving capabilities. These switches are Plug-and-Play out of the box, where network operation can be fine-tuned through a simple Web browser-based GUI, when needed. Features:

48 Gigabit 10/100/1000 Ports
24 Ports of PoE+ with a power budget of 370W
4 x 10 Gigiabit RJ45 Ports 
Performance and reliability
Easy-to-use, simple to deploy and manage
Energy efficiency and lower TCO
Quality of Service (QoS)
HPE 1850-48G 4XGT PoE+ : 48 x RJ-45 1/10GBASE-T ports
4 RJ-45 1/10GBASE-T ports
24 Ports 802.3at PoE+
370 Watts PoE Budget

Easy-to-use, simple to deploy and manage The HPE OfficeConnect 1850 Switch series features an intuitive Web management interface with an enhanced navigation pane for easy management of devices by non-technical users. It is ideal for organisations that require simplicity. Customisable features include VLANs, Spanning Tree, Link aggregation, and IGMP Snooping.


Energy efficiency and lower TCO The HPE OfficeConnect 1850 Switch series include the latest energy-savings capabilities, including Energy Efficient Ethernet (IEEE) and idle-port power down


Quality of Service (QoS) The HPE OfficeConnect 1850 Switch series traffic prioritisation provides time sensitive packets (like VoIP and video) with priority over other traffic based on DSCP or IEEE 802.1p classification. Packets are mapped to eight hardware queues for more effective throughput. Broadcast control allows limiting of broadcast traffic rate, to reduce unwanted network broadcast traffic. IEEE 802.11p/Q delivers data to devices based on the priority and type of traffic.


IEEE 802.3at Power over Ethernet (PoE+) Provides up to 30 W per port, which allows support of the latest PoE+ capable devices such as IP phones, wireless access points, and security cameras, as well as any IEEE 802.3af-compliant end device; lowers the cost of additional electrical cabling and circuits that would otherwise be necessary for IP phone and WLAN deployments


JG9981A
1820 48G JL171A
1820 48G 4XGT JL173A
1820 48G 4XGT PoE+ JL382A
1920S 48G 4SFP Form Factor Rackmount Rackmount Rackmount Rackmount Switching Capacity 104 Gbps 176 Gbps 176 Gbps 104 Gbps Predominant Port Type 1 GbE Gigabit Copper 1 GbE Gigabit Copper 1 GbE Gigabit Copper 1 GbE Gigabit Copper Port Count 48 48 48 48 Uplink Speed/Media 4 SFP 100/1000 Mbps ports 4 RJ-45 1/10GBASE-T ports 4 SFP 100/1000 Mbps ports 4 SFP 100/1000 Mbps ports PoE/PoE+ Ports N/A N/A 24 N/A PoE Budget N/A N/A 370 W PoE+ N/A Management Smart Managed Smart Managed Smart Managed Smart Managed Functionality Layer 2 Only Layer 2 Only Layer 2 Only Layer 3 Lite

2nd Generation Gigabit Stackable Smart Switches Enhance Scalability and Network Convergence for Growing Businesses

The GS752TPSB 52 Port PoE ProSafe® Gigabit Stackable Smart Switch is unique in delivering the scalability, reliability, and performance growing small and medium-sized businesses need in an affordable and easy-to manage package. The NETGEAR Second Generation 52 port switch comes with 48 port PoE copper ports with 8 ports supporting PoE+ and 6 SFP fibre ports, 2 of which are shared and 4 dedicated for either stacking or uplinks. This new generation of Stackable Smart Switches offers more flexibility and scalability that will make it easier and non-interruptive for growing businesses to expand their network capacity.



GS752TPSB : 48-port 1000base-T Gigabit  Stackable Smart PoE Switch
2 x Combo ports to support 10/100/1000 Mbps copper ports or 1 G/100 M optical module
2 x SFP slots (port 25 and 26) to support 1 G optical module
2 x SFP slots (port 27 and 28) to support 1 G optical module (uplink) and 2.5 G stacking
48 PoE ports with 8 ports supporting PoE+ 
384W PoE Budget The new generation of Stackable Smart Switches use 2 dedicated dual-purpose ports in the front of the switch for stacking or uplink. The stacking function offers a 10 Gbps, dual-ring, highly redundant stacking bus that carries intra-stack traffic and provide the highest level of resilience, allowing you to stack up to six switches or up to 300 10/100/1000 Mbps ports, forming a virtual chassis for easy management under a single IP address. This stacking technology also provides several high-availability features to ensure business continuity:

Resiliency: Due to redundant stacking port connections, there is an automatic fail-over in case any switch in the stack fails, with rapid reconfiguration, thus preventing network downtime

Hot-swappable: All switches in the stack are hot-swappable, and can be integrated or removed without disrupting the network

These Stackable Smart Switches come with a complete suite of advanced features for more robust security, higher quality of service and high availability. This switch is equipped with highly advanced features such as access control lists (ACL), static routing, rate limiting, IGMP snooping, and Dynamic VLAN assignment among others to provide a small and medium-sized business with a network that is geared for growth and new network applications. Friendly to converged network with voice and video, the Stackable Smart Switches offers auto voice and auto video features that automatically configures QoS, security and VLAN settings for IP phones and IP cameras.

In order to accommodate the move by internet service providers to IPv6 addresses, the 2nd Generation of Gigabit Stackable Smart Switches expand the IPv6 support beyond management only to QoS, ACL and multicast. It means that your network will benefit from the IPv6 enhancements and is future-proofed.





 

The D-Link DGS-1510 Series is the advanced generation of Smart Managed switches with 10G capability. The PoE-capable switches provide additional flexibility for businesses looking to power IP phones, wireless access points, or IP cameras using existing network infrastructure. The combination of high bandwidth connections and PoE support make the DGS-1510 Series ideal for Small-Medium Enterprise (SME) and Small-Medium Business (SMB) environments. Features: 10G SFP+ stacking/uplink ports
Layer 3 traffic management
Extensive Layer 2 features
Traffic classification & QoS
Keep your network secure
IPv6 ready
10G SFP+ stacking/uplink ports The two SFP+ ports of the DGS-1510 Series switches allow users to create a physical stack of up to 6 units in a fault-tolerant ring or linear topology using Direct Attach Cables (DACs) or any compatible SFP+ transceiver. This creates a total of 288 Gigabit ports, ensuring high bandwidth while staying cost-efficient. Meanwhile, the remaining uplink ports can be used for other functions, such as connecting to a larger network. Users can also easily configure and manage any of the DGS-1510 Series Smart Managed switches in a single stack. With 20 Gbps full-duplex capabilities, the DGS-1510 Series offers 10G connectivity to core networks and servers while still maintaining fast data transfer rates.
Layer 3 traffic management The DGS-1510 Series provides static routing, allowing you to segment your network into workgroups that communicate between VLANs and increase application performance. With these capabilities, you can reduce the load on your core devices, allowing you to create a scalable and efficient network.
Extensive Layer 2 features The DGS-1510 Series switches are equipped with a complete line-up of Layer 2 features, including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection automatically detects and shuts down loops created by a specific port or VLAN. The Cable Diagnostics feature, designed primarily for administrators and customer service representatives, can determine cable quality and can quickly discover sections of cabling that need to be replaced.
Traffic classification & QoS The DGS-1510 Series supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are suited for VoIP and video surveillance deployments. Auto Surveillance VLAN is an advanced technology built into D-Link Smart switches. This technology consolidates data and surveillance video transmissions through a single DGS-1510 Series Smart Managed switch, saving businesses the costs of maintaining expensive dedicated hardware and infrastructure. ASV also ensures the quality of real-time video for monitoring and control without compromising the transmission of conventional network data by giving ASV traffic priority over other packets.
Keep your network secure D-Link's innovative Safeguard Engine protects the DGS-1510 Series against traffic flooding caused by malicious attacks. The DGS-1510 Series supports both MAC and web-based access control. This gives network administrators multiple authentication options, reducing deployment times and removing the need for client software. The DGS-1510 Series supports IEEE 802.1X port-based authentication, allowing network users to be authenticated through external RADIUS servers. The Address Resolution Protocol (ARP) Spoofing Prevention feature helps to prevent attacks that may allow an intruder to intercept users' traffic while the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorized IP assignment.
IPv6 ready The DGS-1510 Series is IPv6 ready and supports various IPv6 functions such as MLD Snooping, IPv6 security features, and IPv6 Quality of Service (QoS), ensuring seamless integration with next generation networks. The DGS-1510 Series also supports IPv4/v6 dual stack functionality, which allows the switches to act as a bridge between IPv4 and IPv6 networks.

The ProSAFE S3300-52X-PoE+ Gigabit Stackable Smart Switch is a L2+ web based platform : PoE+ in a 48 port configuration. 4 dedicated 10G ports are included as standard (2 x 10GBase-T and 2 x SFP+) for stacking and/or uplinks to aggregation layers or storage and server connections. PoE/PoE+ support between 390W to 1440W with RPS.

The Netgear ProSAFE® S3300-28X-PoE+ is a new generation Gigabit Stackable Smart Switch inclusive of 4 10G ports, which can be used for uplinks and/or stacking between other S3300 switches. Dependable switched LAN network design mandates an architecture that can both scale as organisation networks grow-and be flexible enough to provide support for faster server and storage connections needs. As SMBs produce and consume more data, Gigabit to the desktop increasingly needs to be underpinned with 10GbE connectivity to the core to ensure a consistent, seamless user experience. This new generation of switches provides SMB customers with the most cost-effective 10G connections between the access and aggregation layer of the network.
S3300-52X-PoE+: 52 PoE+ Port Gigabit Stackable Smart Switch
48 PoE+-Capable Gigabit copper ports
PoE Budget of 390W Extendable to 1440W with supplemental RPS
2 dedicated 10G SFP+ Fibre ports supporting 10G and 1000M speeds
2 dedicated 10GBase-T Copper ports supporting 10G/1G/100M speeds The S3300-52X switch can deliver on demanding tasks such as data replication and backup, video on demand and high volume transaction processing. Up to 6 switches across the series can be stacked for a total of 288 Gigabit access network ports, with 40Gbps stacking bandwidth and full redundancy for unsurpassed reliability. The inclusion of 10GBase-T uplink capability as standard ensures an affordable way to leverage existing copper installations – if Gigabit speeds and link aggregation meets current requirements, simply migrate to 10GbE connectivity at a pace and time to suit your needs. With lifetime warranty, lifetime NBD and lifetime online technical chat to back you up, you’ll have access to an extensive support service to help protect your investment and reduce downtime risk over the long term.

Features:

Auto Voice VLAN for easy development of VoIP
Auto Video for simple deployment of IP surveillance
Static routing, helps to route internal traffic for more efficient use of network resources
390W PoE+ Budget extendable to 1440W with supplemental RPS solution
IGMP and MLD snooping, providing advanced multicast filtering
Solid performance with non-blocking architecture, 8K MAC addresses, 256 VLANs, 480 shared ACL entries, 32 static routes, and 1,024 Multicast Groups
Comprehensive IPv6 supporting management, QoS and ACL, ensuring investment protection and a smooth migration to IPv6-based network
Dedicated SFPs instead of combo ports, offering more connectivity ports and providing better value and usability at no extra cost
Energy Efficient Ethernet (IEEE802.3az) support for more energy saving in the future when more EEE-compliant end devices come to market
Advanced QoS with IPv4/IPv6 ingress traffic filtering (ACLs) and prioritisation
Dynamic VLAN assignment for easy user authentication and location-independent access to network
USB for easy access firmware updates



S3300-28X 3300-28X-PoE+ S3300-52X S3300-52X-PoE+ Form Factor Rackmount Rackmount Rackmount Rackmount Bandwidth 128Gbps 128Gbps 176Gbps 176Gbps 100M/1G Copper  (RJ-45) Ports 24 24 48 48  10G SFP Fibre Ports  4 (2 copper 2 fibre) (dedicated) 4 (2 copper 2 fibre) (dedicated) 4 (2 copper 2 fibre) (dedicated) 4 (2 copper 2 fibre) (dedicated) PoE/PoE+ Ports N/A 24 PoE+ N/A 48 PoE+ Total PoE power budget (watts), without RPS N/A 195W N/A 390W RPS support: RPS mode, max. PoE power budget with RPS N/A 720W N/A 1440W Dimensions 440 x 257 x 43mm 440 x 257 x 43mm 440 x 257 x 43mm 440 x 345 x 43mm

An ideal companion to the rapidly emerging class of 10-gigabit servers, the NETGEAR ProSafe 52-port gigabit stackable smart switch is the smart switch with 10-gigabit connectivity - delivering maximum throughput in SMB networks for demanding tasks such as data replication and backup, virtualization, video on demand and high-volume transaction processing. At less than half the cost of a managed switch, the ProSafe 52-port gigabit smart switch provides 48 gigabit ports for connecting devices to the network, along with four 10 GE SFP+ ports for stacking or uplink to servers. The GS752TXS offers a rich enterprise-class feature set, including advanced traffic management and security, yet can be easily configured and monitored through a web-based graphical user interface.With a rich set of Layer 2 management features, the GS752TXS is efficient, secure and ready for the future. Static routing allows for segmentation of the network, with internal routing through the switch - reserving the router for external traffic routing only, making the entire network more efficient. Dynamic VLAN assignment increases security by imposing consistent policy and user credentials across the network, regardless of where users connect. Support for MLD Snooping greatly increase network efficiency by forwarding multicast traffic to designated hosts only, rather than flooding multicast packets across all ports. The GS752TXS also comes with full IPv6 support, comprehensive security and advanced multicast management.

The HPE 1950-48G-PoE+ JG963A Switch is a 48 Port PoE+ Smart web-managed Gigabit switch with two 10GBASE T copper ports and two SFP+ ports for SFP+/SFP fibre connections, ideal for small business customers needing advanced high-performance connections. True stacking of as many as 4 devices allows them to be logically administered as a single entity. The switches support Layer 3 static routing on IPv4 and IPv6. Other advanced features include ACLs, 802.1X, STP, RSTP, and MSTP. Limited lifetime warranty covers unit, fans and power supplies.

Features:
48-port Smart web-managed Gigabit Ethernet switch with 52 total ports
24 RJ-45 auto-negotiating 10/100/1000 ports
2 10-Gigabit 10GBASE-T and 2-ports 10-Gigabit SFP Ports
48 Ports of PoE+ with a budget of 370W
True 4-high stacking on edge switches; 2-high stacking on the aggregator switch
Layer 3 routing with 32 static routes
Enhanced network security with ACLs and network login
Usability and feature set optimised for smaller networks
Limited Lifetime Warranty
High-level Gigabit with 10GbE Networking for Advanced Small Businesses Each model of the HPE 1950 Switch Series includes four 10GbE connections to connect to servers, network storage devices, or to other switches.

Two connections of 10GBASE-T deliver 10GbE over copper Category 6a cabling for simple, affordable, high-bandwidth connections to a maximum distance of 100 meters.

Two SFP+ ports allow for fibre connectivity at various distances, at 1/10GbE speeds, using optional SFP+ 10GbE or SFP Gigabit transceivers.

Aggregate 10GbE connections for even higher bandwidth using Link Aggregation Control Protocol.


Simplified Network Administration Logically group or "stack" as many as four units of the HPE 1950 Switch Series and manage this as a single entity, greatly simplifying network administration. Interconnect stacked units using 10GbE connections, with as much as 40GbE total stacking bandwidth connecting the units.

Use the intuitive web-browser based interface to configure and administer these smart-managed devices.

These devices support SNMP versions 1, 2c and 3, allowing administration of these devices from a remote SNMP-based management platform.

Network Time Protocol facilitates timekeeping across your network so time-based actions and trouble-shooting logs are kept synchronised.

Units will automatically retrieve an IP Address from a DHCP server, allowing for near plug-and-play deployments.


Robust Security to Protect Your Network The HPE 1950 Switch Series lets you use Virtual LANs and access control lists to set bounds on what data can be seen by which users.

Leverage 802.1X with a RADIUS server to ensure only known and authorised users can access your network.

Multiple features guard your network from user or server spoofing and from malicious network-based attacks.

Help secure management traffic using supported SSL/HTTPS encryption and SNMPv3 capabilities.


Resiliency Features to Keep Your Network Running The HPE 1950 Switch Series supports Spanning Tree Protocol, Rapid Spanning Tree Protocol, and Multiple Spanning Tree Protocol standards for creating hot-standby recovery links.

Distribute important links across multiple units in a logical stack for added resiliency. Units can even be in different buildings and still be logically stacked.

Devices support two independent primary and secondary operating system flash images for backup and recovery during unit upgrades.

Can be paired with an optional Redundant Power System which can maintain power even if the unit's power supply fails, as well as supplement available PoE power up to 780 Watts.
Click on the product images below to be taken to the range of products