Cisco PoE Switches

Cisco Business 110 Series Unmanaged Switch

Affordable, Plug-and-Play Switches for Small Business Networks

These are times of unprecedented change for small businesses. Consumers are more demanding than ever before. Online transactions have accelerated. While this new promises greater reward, it also requires small businesses to accelerate digital transformation. At the same time, employees are increasingly distributed across remote and office locations, and this trend is likely to continue. You need a network solution that provides fast, reliable access to critical cloud-based business applications across a remote and in-office workforce.

Now you can have a high-performance, business-class network with the Cisco® Business 110 Series Unmanaged Switches. These affordable plug-and-play switches are ideal for small offices, workgroups, departments, and growing offices with limited IT know-how and support.




Highlights • Affordable 10/100/1000-Mbps speeds for bandwidth-hungry applications

• Plug-and-play, not IT knowledge required

• 5- to 24-port models that are desktop or rack mountable

• Power over Ethernet models to provide power to access points, IP phones and, other devices


Cisco Business 110 Series Unmanaged Switches, part of the Cisco Business networking portfolio, are a family of affordable switches that provide Gigabit Ethernet connectivity for your small business network. Available in desktop and rack-mount models, these switches are designed to suit any small business with basic network needs and are optimized for power efficiency. They provide robust network connectivity your business demands, as well as added reliability with advanced features such as Quality of Service (QoS), loop detection, and cable diagnostics, all in a switch that you can set up yourself in minutes. The Cisco Business 110 Series switches bring the proven reliability and investment protection of Cisco networking solutions to your small business.




Simple Cisco Business 110 Series switches work right out of the box, with plug-and-play capability without software installation and configuration. Each switch port independently sets itself for the optimal speed and determines whether to run in half- or full-duplex mode automatically. As a standards-based Cisco solution, Cisco Business 110 Series switches are also designed to immediately accommodate all of the devices in your network.




Flexible deployment Designed for small office spaces, Cisco Business 110 Series switches are available in 5-, 8-, 16-, and 24-ports configurations, providing ultimate flexibility for diverse use cases and deployment scenarios. The Cisco Business 110 Series switches are also available in both compact desktop and rack-mount models. The desktop models offer a wall-mount option for discreet mounting under a desk or on the wall of an office or conference room. All switches have no fans, so they run silently and unobtrusively in any workspace.




High performance Cisco Business 110 Series switches deliver the performance you need to run your business applications, including bandwidth-intensive cloud applications and video services, and to avoid slow and sluggish networks. They support Gigabit Ethernet speeds, unlocking a new level of capacity and performance in your business network and letting you transfer large files in seconds.




Reduced energy costs Cisco Business 110 Series switches are designed to help conserve energy by optimizing power use without compromising performance, which protects our environment and reduces your energy costs. In addition, they support the Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption by monitoring the amount of traffic on an active link and putting the link into a sleep state during quiet periods.




Power over Ethernet (PoE) Cisco Business 110 Series switches are available with PoE ports. This capability simplifies the deployment of IP telephony, wireless, video surveillance, and other IoT solutions by allowing you to connect and power network endpoints over a single Ethernet cable. With no need to install separate power supplies for IP phones or wireless access points, you can take advantage of advanced communications technologies more quickly and at a lower cost.




Advanced technologies All switches include advanced Cisco traffic-handling features to keep your applications running at peak performance. Integrated QoS intelligence on all models automatically prioritizes delay-sensitive services such as voice or video to improve your network's performance. Loop detection helps discover loops in the network that you might have accidentally created, thus avoiding storms that will bring your network to a stall. Cable diagnostics help to quickly identify and troubleshoot network cabling faults and issues. Fast store-and-forward switching identifies damaged packets and prevents them from being passed on through the network. All of these features run automatically, with no management or configuration required.




Peace of mind Cisco Business 110 Series switches deliver the rock-solid reliability you expect from a Cisco switch. The solution has been rigorously tested to make sure of optimal uptime and performance. In addition, the limited lifetime hardware warranty provides peace of mind


Full specification and details can be found in the Product Datasheet PDF file

As per Cisco's UK policy we are unable to ship any Cisco products to any address other than a company registered address as shown on Companies House.

Cisco® Catalyst® 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified.

As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey.

Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations.

With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 80 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry’s unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.





Catalyst 9200 with 24 Gigabit PoE+ Ports
4 x 1 G SFP fixed uplinks
340W PoE+ Budget
Redundant Power Supplies and Fans


Product Highlights

24 ports of full Power over Ethernet Plus (PoE+) capability
Available PoE power with single primary power supply on: 340W
Available PoE power with additional secondary power supply: 740W
Resiliency with and redundant power supplies and fans
Flexible downlink options with data or PoE+
Operational efficiency with optional backplane stacking, supporting stacking bandwidth up to 80 Gbps
ADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure
Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems
Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access
Advanced network monitoring using Full Flexible NetFlow
Cisco Software-Defined Access (SD-Access):
Simplified operations and deployment with policy-based automation from edge to cloud managed with Cisco Identity Services Engine (ISE)
Network assurance and improved resolution time through Cisco DNA Center
Plug and Play (PnP) enabled: A simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network
Cisco IOS XE: A Common Licensing based operating system for the enterprise Cisco Catalyst 9000 product family with support for model-driven programmability and streaming telemetry
ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries
Features:

Secure:

Cisco's best-in-class security portfolio is anchored by Talos, Trustworthy Solutions, MACsec encryption, and segmentation. Get advanced security features that protect the integrity of your hardware, software, and all data that flows through the switch.

Always on

Catalyst 9200 Series switches provide enterprise-level resiliency, analytics, and assurance to keep your business up and running seamlessly. FRU power supplies and fans, modular uplinks, cold patching, perpetual PoE, and the industry's highest mean time between failure (MTBF) make Catalyst 9200 Series switches stand out against other switches in their class.

IT simplicity

Get a simple web UI or Cisco DNA Center provisioning, combined with the open APIs of Cisco IOS XE and the programmability of the UADP ASIC technology. Catalyst 9200 Series switches provide simple operation now with investment protection for future innovations.

Features on Cisco Catalyst uplink switches Network Essentials Network Advantage Switch fundamentals

Layer 2, Routed Access (RIP, EIGRP Stub, OSPF - 1000 routes), PBR, PIM Stub Multicast (1000 routes), PVLAN, VRRP, PBR, CDP, QoS, FHS, 802.1X, MACsec-128, CoPP, SXP, IP SLA Responder Advanced switch capabilities and scale

EIGRP, HSRP, IS-IS, BSR, MSDP, IP SLA, OSPF Network segmentation

VRF, VXLAN, LISP, SGT Automation

NETCONF, RESTCONF, YANG, PnP Agent, PnP Telemetry and visibility

Model-driven telemetry, sampled NetFlow, SPAN, RSPAN Security

MACsec-128 Cisco DNA for Switching - Subscription

A new era of secure, intelligent switching

Cisco's innovative switching solutions handle the demands of new security threats, the evolving Internet of Things (IoT), and mobility integration. Get all of these innovations with our simple, flexible software subscription suites. Cisco DNA for Switching subscriptions simplify the purchase and use of our Cisco Digital Network Architecture (Cisco DNA) capabilities.

As per Cisco's UK policy we are unable to ship any Cisco products to any address other than a company registered address as shown on Companies House.

Cisco® Catalyst® 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified.

As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey.

Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations.

With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry’s unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.





Catalyst 9200 with 24 Gigabit PoE+ Ports
4 x 1/10 G modular uplinks
370W PoE+ Budget
FRU Redundant Power Supplies and Fans


Product Highlights

24 ports of full Power over Ethernet Plus (PoE+) capability
Available PoE power with single primary power supply on: 370W
Available PoE power with additional secondary power supply: 740W
Resiliency with Field-Replaceable Units (FRU) and redundant power supply, fans, and modular uplinks
Flexible downlink options with data or PoE+
Operational efficiency with optional backplane stacking, supporting stacking bandwidth up to 160 Gbps
ADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure
Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems
Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access
Advanced network monitoring using Full Flexible NetFlow
Cisco Software-Defined Access (SD-Access):
Simplified operations and deployment with policy-based automation from edge to cloud managed with Cisco Identity Services Engine (ISE)
Network assurance and improved resolution time through Cisco DNA Center
Plug and Play (PnP) enabled: A simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network
Cisco IOS XE: A Common Licensing based operating system for the enterprise Cisco Catalyst 9000 product family with support for model-driven programmability and streaming telemetry
ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries
Features:

Secure:

Cisco's best-in-class security portfolio is anchored by Talos, Trustworthy Solutions, MACsec encryption, and segmentation. Get advanced security features that protect the integrity of your hardware, software, and all data that flows through the switch.

Always on

Catalyst 9200 Series switches provide enterprise-level resiliency, analytics, and assurance to keep your business up and running seamlessly. FRU power supplies and fans, modular uplinks, cold patching, perpetual PoE, and the industry's highest mean time between failure (MTBF) make Catalyst 9200 Series switches stand out against other switches in their class.?

IT simplicity

Get a simple web UI or Cisco DNA Center provisioning, combined with the open APIs of Cisco IOS XE and the programmability of the UADP ASIC technology. Catalyst 9200 Series switches provide simple operation now with investment protection for future innovations.

Features on Cisco Catalyst uplink switches Network Essentials Network Advantage Switch fundamentals

Layer 2, Routed Access (RIP, EIGRP Stub, OSPF - 1000 routes), PBR, PIM Stub Multicast (1000 routes), PVLAN, VRRP, PBR, CDP, QoS, FHS, 802.1X, MACsec-128, CoPP, SXP, IP SLA Responder Advanced switch capabilities and scale

EIGRP, HSRP, IS-IS, BSR, MSDP, IP SLA, OSPF Network segmentation

VRF, VXLAN, LISP, SGT Automation

NETCONF, RESTCONF, YANG, PnP Agent, PnP Telemetry and visibility

Model-driven telemetry, sampled NetFlow, SPAN, RSPAN Security

MACsec-128 Cisco DNA for Switching - Subscription

A new era of secure, intelligent switching

Cisco's innovative switching solutions handle the demands of new security threats, the evolving Internet of Things (IoT), and mobility integration. Get all of these innovations with our simple, flexible software subscription suites. Cisco DNA for Switching subscriptions simplify the purchase and use of our Cisco Digital Network Architecture (Cisco DNA) capabilities.

As per Cisco's UK policy we are unable to ship any Cisco products to any address other than a company registered address as shown on Companies House.

Cisco® Catalyst® 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified.

As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey.

Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations.

With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 80 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry’s unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.





Catalyst 9200 with 24 Gigabit PoE+ Ports
4 x 1 G SFP fixed uplinks
340W PoE+ Budget
Redundant Power Supplies and Fans


Product Highlights

24 ports of full Power over Ethernet Plus (PoE+) capability
Available PoE power with single primary power supply on: 340W
Available PoE power with additional secondary power supply: 740W
Resiliency with and redundant power supplies and fans
Flexible downlink options with data or PoE+
Operational efficiency with optional backplane stacking, supporting stacking bandwidth up to 80 Gbps
ADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure
Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems
Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access
Advanced network monitoring using Full Flexible NetFlow
Cisco Software-Defined Access (SD-Access):
Simplified operations and deployment with policy-based automation from edge to cloud managed with Cisco Identity Services Engine (ISE)
Network assurance and improved resolution time through Cisco DNA Center
Plug and Play (PnP) enabled: A simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network
Cisco IOS XE: A Common Licensing based operating system for the enterprise Cisco Catalyst 9000 product family with support for model-driven programmability and streaming telemetry
ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries
Features:

Secure:

Cisco's best-in-class security portfolio is anchored by Talos, Trustworthy Solutions, MACsec encryption, and segmentation. Get advanced security features that protect the integrity of your hardware, software, and all data that flows through the switch.

Always on

Catalyst 9200 Series switches provide enterprise-level resiliency, analytics, and assurance to keep your business up and running seamlessly. FRU power supplies and fans, modular uplinks, cold patching, perpetual PoE, and the industry's highest mean time between failure (MTBF) make Catalyst 9200 Series switches stand out against other switches in their class.

IT simplicity

Get a simple web UI or Cisco DNA Center provisioning, combined with the open APIs of Cisco IOS XE and the programmability of the UADP ASIC technology. Catalyst 9200 Series switches provide simple operation now with investment protection for future innovations.

Features on Cisco Catalyst uplink switches Network Essentials Network Advantage Switch fundamentals

Layer 2, Routed Access (RIP, EIGRP Stub, OSPF - 1000 routes), PBR, PIM Stub Multicast (1000 routes), PVLAN, VRRP, PBR, CDP, QoS, FHS, 802.1X, MACsec-128, CoPP, SXP, IP SLA Responder Advanced switch capabilities and scale

EIGRP, HSRP, IS-IS, BSR, MSDP, IP SLA, OSPF Network segmentation

VRF, VXLAN, LISP, SGT Automation

NETCONF, RESTCONF, YANG, PnP Agent, PnP Telemetry and visibility

Model-driven telemetry, sampled NetFlow, SPAN, RSPAN Security

MACsec-128 Cisco DNA for Switching - Subscription

A new era of secure, intelligent switching

Cisco's innovative switching solutions handle the demands of new security threats, the evolving Internet of Things (IoT), and mobility integration. Get all of these innovations with our simple, flexible software subscription suites. Cisco DNA for Switching subscriptions simplify the purchase and use of our Cisco Digital Network Architecture (Cisco DNA) capabilities.

As per Cisco's UK policy we are unable to ship any Cisco products to any address other than a company registered address as shown on Companies House.

Cisco® Catalyst® 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified.

As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey.

Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations.

With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry’s unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.





Catalyst 9200 with 24 Gigabit PoE+ Ports
4 x 1/10 G modular uplinks
370W PoE+ Budget
FRU Redundant Power Supplies and Fans


Product Highlights

24 ports of full Power over Ethernet Plus (PoE+) capability
Available PoE power with single primary power supply on: 370W
Available PoE power with additional secondary power supply: 740W
Resiliency with Field-Replaceable Units (FRU) and redundant power supply, fans, and modular uplinks
Flexible downlink options with data or PoE+
Operational efficiency with optional backplane stacking, supporting stacking bandwidth up to 160 Gbps
ADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure
Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems
Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access
Advanced network monitoring using Full Flexible NetFlow
Cisco Software-Defined Access (SD-Access):
Simplified operations and deployment with policy-based automation from edge to cloud managed with Cisco Identity Services Engine (ISE)
Network assurance and improved resolution time through Cisco DNA Center
Plug and Play (PnP) enabled: A simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network
Cisco IOS XE: A Common Licensing based operating system for the enterprise Cisco Catalyst 9000 product family with support for model-driven programmability and streaming telemetry
ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries
Features:

Secure:

Cisco's best-in-class security portfolio is anchored by Talos, Trustworthy Solutions, MACsec encryption, and segmentation. Get advanced security features that protect the integrity of your hardware, software, and all data that flows through the switch.

Always on

Catalyst 9200 Series switches provide enterprise-level resiliency, analytics, and assurance to keep your business up and running seamlessly. FRU power supplies and fans, modular uplinks, cold patching, perpetual PoE, and the industry's highest mean time between failure (MTBF) make Catalyst 9200 Series switches stand out against other switches in their class.?

IT simplicity

Get a simple web UI or Cisco DNA Center provisioning, combined with the open APIs of Cisco IOS XE and the programmability of the UADP ASIC technology. Catalyst 9200 Series switches provide simple operation now with investment protection for future innovations.

Features on Cisco Catalyst uplink switches Network Essentials Network Advantage Switch fundamentals

Layer 2, Routed Access (RIP, EIGRP Stub, OSPF - 1000 routes), PBR, PIM Stub Multicast (1000 routes), PVLAN, VRRP, PBR, CDP, QoS, FHS, 802.1X, MACsec-128, CoPP, SXP, IP SLA Responder Advanced switch capabilities and scale

EIGRP, HSRP, IS-IS, BSR, MSDP, IP SLA, OSPF Network segmentation

VRF, VXLAN, LISP, SGT Automation

NETCONF, RESTCONF, YANG, PnP Agent, PnP Telemetry and visibility

Model-driven telemetry, sampled NetFlow, SPAN, RSPAN Security

MACsec-128 Cisco DNA for Switching - Subscription

A new era of secure, intelligent switching

Cisco's innovative switching solutions handle the demands of new security threats, the evolving Internet of Things (IoT), and mobility integration. Get all of these innovations with our simple, flexible software subscription suites. Cisco DNA for Switching subscriptions simplify the purchase and use of our Cisco Digital Network Architecture (Cisco DNA) capabilities.

As per Cisco's UK policy we are unable to ship any Cisco products to any address other than a company registered address as shown on Companies House.

Cisco® Catalyst® 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified.

As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey.

Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations.

With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 80 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry’s unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.





Catalyst 9200 with 48 Gigabit PoE+ Ports
4 x 1 G SFP fixed uplinks
740W PoE+ Budget
Redundant Power Supplies and Fans


Product Highlights

48 ports of full Power over Ethernet Plus (PoE+) capability
Available PoE power with single primary power supply on: 740W
Available PoE power with additional secondary power supply: 1440W
Resiliency with redundant power supplies and fans.
Flexible downlink options with data or PoE+
Operational efficiency with optional backplane stacking, supporting stacking bandwidth up to 80 Gbps
ADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure
Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems
Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access
Advanced network monitoring using Full Flexible NetFlow
Cisco Software-Defined Access (SD-Access):
Simplified operations and deployment with policy-based automation from edge to cloud managed with Cisco Identity Services Engine (ISE)
Network assurance and improved resolution time through Cisco DNA Center
Plug and Play (PnP) enabled: A simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network
Cisco IOS XE: A Common Licensing based operating system for the enterprise Cisco Catalyst 9000 product family with support for model-driven programmability and streaming telemetry
ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries
Features:

Secure:

Cisco's best-in-class security portfolio is anchored by Talos, Trustworthy Solutions, MACsec encryption, and segmentation. Get advanced security features that protect the integrity of your hardware, software, and all data that flows through the switch.

Always on

Catalyst 9200 Series switches provide enterprise-level resiliency, analytics, and assurance to keep your business up and running seamlessly. FRU power supplies and fans, modular uplinks, cold patching, perpetual PoE, and the industry's highest mean time between failure (MTBF) make Catalyst 9200 Series switches stand out against other switches in their class.

IT simplicity

Get a simple web UI or Cisco DNA Center provisioning, combined with the open APIs of Cisco IOS XE and the programmability of the UADP ASIC technology. Catalyst 9200 Series switches provide simple operation now with investment protection for future innovations.

Features on Cisco Catalyst uplink switches Network Essentials Network Advantage Switch fundamentals

Layer 2, Routed Access (RIP, EIGRP Stub, OSPF - 1000 routes), PBR, PIM Stub Multicast (1000 routes), PVLAN, VRRP, PBR, CDP, QoS, FHS, 802.1X, MACsec-128, CoPP, SXP, IP SLA Responder Advanced switch capabilities and scale

EIGRP, HSRP, IS-IS, BSR, MSDP, IP SLA, OSPF Network segmentation

VRF, VXLAN, LISP, SGT Automation

NETCONF, RESTCONF, YANG, PnP Agent, PnP Telemetry and visibility

Model-driven telemetry, sampled NetFlow, SPAN, RSPAN Security

MACsec-128 Cisco DNA for Switching - Subscription

A new era of secure, intelligent switching

Cisco's innovative switching solutions handle the demands of new security threats, the evolving Internet of Things (IoT), and mobility integration. Get all of these innovations with our simple, flexible software subscription suites. Cisco DNA for Switching subscriptions simplify the purchase and use of our Cisco Digital Network Architecture (Cisco DNA) capabilities.

As per Cisco's UK policy we are unable to ship any Cisco products to any address other than a company registered address as shown on Companies House.

The Cisco Catalyst C9300L-24P-4X-M brings high-efficiency switching to networks that require reliability, performance, and simplified management. Designed for scaling connectivity while supporting Power over Ethernet across all access ports, this model suits growing digital infrastructure environments needing secure, high-capacity switching and modular expansion. Its cloud-managed capabilities reduce configuration friction and support smarter network oversight from anywhere.

Key Features 24 x 1G PoE+ ports with up to 505W total PoE budget
4 x 10G SFP+ fixed uplink ports
Cloud-based Meraki dashboard management
StackWise-320 support for up to 8 units
Layer 3 switching with policy-based segmentation
Flexible power with modular PSU options
Energy Efficient Ethernet and per-port analytics
The Catalyst 9300L-M addresses the most demanding enterprise applications by combining the simplicity of the Meraki dashboard with powerful switching hardware. To satisfy high-bandwidth applications and the deployment of high-speed wifi access points, the Catalyst 9300L-M provides multigigabit ports, 320GB stacking with four fixed 10G uplinks. The Catalyst 9300L-M delivers resiliency with fast stack convergence. The Catalyst 9300L-M provides Adaptive Policy using an over-the-wire tag which segments traffic into security groups to deliver scalable security. The Catalyst 9300L-M is integrated under the Meraki dashboard to provide a simply powerful solution to the most demanding wired access applications.

Adaptive Policy provides simple & scalable security policies to segment traffic using Security Groups. Security Groups are created in the dashboard using natural language such as “IOT device” & “Guest.” The security policy intent (e.g., Permit or Deny) is then simply provisioned between Security Groups which results in the segmentation of each group's traffic. By making security policy management intuitive and scalable relative to legacy IP-address based Access Control Lists, Adaptive Policy empowers operators to confidently secure their network traffic independent of future network changes.

High-Powered Access Switching This switch is purpose-built for high-demand access layers. It combines 24 full-power PoE+ ports with advanced software-based traffic visibility and segmentation, making it ideal for powering devices like VoIP phones, access points, and cameras while still maintaining fine-grained traffic control.

Flexible Uplinks & Hardware Stacking With four fixed SFP+ uplink ports and optional hardware stacking via StackWise-320, the C9300L-24P-4X-M supports network growth and redundancy. It enables seamless link aggregation and cross-stack EtherChannel for scalable design.

Cloud-Managed Simplicity Fully integrated with the Meraki dashboard, this model allows administrators to push updates, monitor performance, configure ports, and enforce policies from a centralized web interface—no need for CLI scripting or local access points.

Security & Reliability Built In It supports secure access through 802.1X, ACLs, and network-wide visibility. Designed with built-in redundancy and fan-based cooling, it maintains performance even in challenging physical environments or power events.

Note

All current Cisco Meraki products require valid licensing to operate. Having licenses allows your organisation’s cloud-based online Dashboard, hosted by Meraki, to connect to and configure & manage all your Meraki devices. All devices are controlled under a single pane of glass in the dashboard.

*Product may differ in appearance; Images used are for illustrative purposes only

As per Cisco's UK policy we are unable to ship any Cisco products to any address other than a company registered address as shown on Companies House.

The Cisco Catalyst C9300L-24T-4X-M is a Meraki-managed network switch designed for organizations that need fast, scalable, and centralized control of their wired infrastructure. With a fixed 24-port layout and four 10G SFP+ uplinks, this model delivers consistent performance in high-traffic environments. Cloud-based management via the Meraki dashboard makes setup, monitoring, and security adjustments streamlined across distributed sites or central locations.

Key Features 24x 1G RJ45 access ports
4x fixed 10G SFP+ uplinks for high-speed aggregation
Managed through the Cisco Meraki cloud platform
StackWise-320 support for physical stacking (up to 8 units)
UADP 2.0 ASIC for advanced visibility and control functions
Integrated support for Adaptive Policy segmentation
Built-in 350W power supply, non-PoE
The Catalyst 9300L-M addresses the most demanding enterprise applications by combining the simplicity of the Meraki dashboard with powerful switching hardware. To satisfy high-bandwidth applications and the deployment of high-speed wifi access points, the Catalyst 9300L-M provides multigigabit ports, 320GB stacking with four fixed 10G uplinks. The Catalyst 9300L-M delivers resiliency with fast stack convergence. The Catalyst 9300L-M provides Adaptive Policy using an over-the-wire tag which segments traffic into security groups to deliver scalable security. The Catalyst 9300L-M is integrated under the Meraki dashboard to provide a simply powerful solution to the most demanding wired access applications.

Adaptive Policy provides simple & scalable security policies to segment traffic using Security Groups. Security Groups are created in the dashboard using natural language such as “IOT device” & “Guest.” The security policy intent (e.g., Permit or Deny) is then simply provisioned between Security Groups which results in the segmentation of each group's traffic. By making security policy management intuitive and scalable relative to legacy IP-address based Access Control Lists, Adaptive Policy empowers operators to confidently secure their network traffic independent of future network changes.

Cloud-First Management The Meraki dashboard allows admins to deploy and monitor the switch from anywhere, with built-in tools for traffic shaping, access control, and alerting. Policies can be assigned by tags for granular segmentation, simplifying network oversight.

Designed for Speed and Stackability With 4 integrated 10G uplinks and the ability to stack up to 8 switches using StackWise-320, the C9300L-24T-4X-M fits into growing infrastructures that require low-latency switching and seamless expansion without manual reconfiguration.

Built for Dense Wired Deployments This model is ideal for switch closets and access layers where wireless APs, user devices, and other critical endpoints require stable 1G connections with fast uplinks and streamlined cloud visibility.

Note

All current Cisco Meraki products require valid licensing to operate. Having licenses allows your organisation’s cloud-based online Dashboard, hosted by Meraki, to connect to and configure & manage all your Meraki devices. All devices are controlled under a single pane of glass in the dashboard.

As per Cisco's UK policy we are unable to ship any Cisco products to any address other than a company registered address as shown on Companies House.

The Cisco® Catalyst® 9300 Series Switches are Cisco’s lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry’s most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco’s lead enterprise architecture. At 480 Gbps, they are the industry’s highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimised platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch.

Catalyst 9300 24-port PoE+, Network Essentials
24 × PoE+ 10/100/1000 Ports
715 Watt Power Supply
PoE Budget of 445W

Features:

Highest wireless scale with Wave 2 access points supported on a single switch with select models
UADP 2.0 Application-Specific Integrated Circuit (ASIC) with programmable pipeline and microengine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries
x86 CPU complex with 8-GB memory, and 16 GB of flash and external USB 3.0 SSD pluggable storage slot (delivering 120GB of storage with an option SSD drive) to host containers
USB 2.0 slot to load system images and set configurations
Up to 480 Gbps of local stackable switching bandwidth
Leading PoE capabilities with up to 384 ports of PoE per stack and PoE+
Intelligent Power Management with Cisco StackPower technology, providing power stacking among members for power redundancy
Line-rate, hardware-based Flexible NetFlow (FNF), delivering flow collection of up to 64,000 flows
IPv6 support in hardware, providing wire-rate forwarding for IPv6 networks
Dual-stack support for IPv4/IPv6 and dynamic hardware forwarding table allocations, for ease of IPv4-to-IPv6 migration
IEEE 802.1ba AV Bridging (AVB) built in to provide a better audio and video experience through improved time synchronization and QoS
Precision Time Protocol (PTP; IEEE 1588v2) provides accurate clock synchronisation with sub-microsecond accuracy making it suitable for distribution and synchronisation of time and frequency over network
Cisco IOS XE, a modern operating system for the enterprise with support for model-driven programmability including NETCONF, RESTCONF, YANG, on-box Python scripting, streaming telemetry, container-based application hosting, and patching for critical bug fixes. The OS also has built-in defenses to protect against runtime attacks
SD-Access: The Cisco Catalyst 9300 Series Switches form the foundational building block for SD-Access, Cisco’s lead enterprise architecture: Policy-based automation from edge to cloud
Simplified segmentation and micro-segmentation, with predictable performance and scalability
Automation through the Cisco Application Policy Infrastructure Controller Enterprise Module (APIC-EM)
Policy handled through the Cisco Identity Services Engine (ISE)
Network assurance provided through the Network Data Platform
Faster launch of new business services and significantly improved issue resolution time

SD-Access Embedded Wireless: The Cisco Catalyst 9800 Wireless Controller Software package can be installed on Cisco Catalyst 9300 series switches to enable wireless controller functionality for distributed branches and small campuses. Once installed Wireless Controller running on Catalyst 9300 can support up-to 200 APs and 4000 Clients. Maximum two Wireless Controllers can be enabled per site on two different Catalyst 9300 which will increase to scale to 400 APs and 8000 Wireless Clients. C9800 Wireless Controller Software Package will enable Wireless Functionality only for SD-Access deployments with two supported topologies : C9800 Wireless Software Package can be enabled on C9300 series switches functioning as Co-Located Border and Control Plane
C9800 Wireless Software Package can be enabled on C9300 series switches functioning as Fabric in a Box

Plug and Play (PnP) enabled: A simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network
Advanced security Encrypted Traffic Analytics (ETA): You benefit from the power of machine learning to identify and take actions toward threats or anomalies in your network, including malware detection in encrypted traffic (without decryption) and distributed anomaly detection
Support for AES-256 with the powerful MACsec 256-bit encryption algorithm available on all models
Trustworthy systems: Hardware anchored Secure Boot and Secure Unique Device Identification (SUDI) support for Plug and Play, to verify the identity of the hardware and software

Network Essentials and Advantage package features

Features on Cisco Catalyst uplink switches Network Essentials Network Advantage Switch fundamentals

Layer 2, Routed Access (RIP, EIGRP Stub, OSPF - 1000 routes), PBR, PIM Stub Multicast (1000 routes)), PVLAN, VRRP, PBR, CDP, QoS, FHS, 802.1X, MACsec-128, CoPP, SXP, IP SLA Responder, SSO Advanced switch capabilities and scale

BGP, EIGRP, HSRP, IS-IS, BSR, MSDP, PIM-BIDIR,* IP SLA, OSPF Network segmentation

VRF, VXLAN, LISP, SGT, MPLS, mVPN Automation

NETCONF, RESTCONF, gRPC, YANG, PnP Agent, ZTP/Open PnP, GuestShell (On-Box Python) Telemetry and visibility

Model-driven telemetry, sampled NetFlow, SPAN, RSPAN High availability and resiliency

Nonstop Forwarding (NSF), Graceful Insertion and Removal (GIR), Fast Software Upgrade (FSU) IOT integration

AVB, PTP, CoAP Security

MACsec-256 Cisco DNA for Switching - Subscription

A new era of secure, intelligent switching

Cisco's innovative switching solutions handle the demands of new security threats, the evolving Internet of Things (IoT), and mobility integration. Get all of these innovations with our simple, flexible software subscription suites. Cisco DNA for Switching subscriptions simplify the purchase and use of our Cisco Digital Network Architecture (Cisco DNA) capabilities.

As per Cisco's UK policy we are unable to ship any Cisco products to any address other than a company registered address as shown on Companies House.

The Cisco® Catalyst® 9300 Series Switches are Cisco’s lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry’s most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco’s lead enterprise architecture. At 480 Gbps, they are the industry’s highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimised platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch.

C9300-24P-A: Catalyst 9300 24-port PoE+, Network Advantage
24 × PoE+ 10/100/1000 Ports
715 Watt Power Supply
PoE Budget of 445W

Features:

Highest wireless scale with Wave 2 access points supported on a single switch with select models
UADP 2.0 Application-Specific Integrated Circuit (ASIC) with programmable pipeline and microengine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries
x86 CPU complex with 8-GB memory, and 16 GB of flash and external USB 3.0 SSD pluggable storage slot (delivering 120GB of storage with an option SSD drive) to host containers
USB 2.0 slot to load system images and set configurations
Up to 480 Gbps of local stackable switching bandwidth
Leading PoE capabilities with up to 384 ports of PoE per stack and PoE+
Intelligent Power Management with Cisco StackPower technology, providing power stacking among members for power redundancy
Line-rate, hardware-based Flexible NetFlow (FNF), delivering flow collection of up to 64,000 flows
IPv6 support in hardware, providing wire-rate forwarding for IPv6 networks
Dual-stack support for IPv4/IPv6 and dynamic hardware forwarding table allocations, for ease of IPv4-to-IPv6 migration
IEEE 802.1ba AV Bridging (AVB) built in to provide a better audio and video experience through improved time synchronization and QoS
Precision Time Protocol (PTP; IEEE 1588v2) provides accurate clock synchronisation with sub-microsecond accuracy making it suitable for distribution and synchronisation of time and frequency over network
Cisco IOS XE, a modern operating system for the enterprise with support for model-driven programmability including NETCONF, RESTCONF, YANG, on-box Python scripting, streaming telemetry, container-based application hosting, and patching for critical bug fixes. The OS also has built-in defenses to protect against runtime attacks
SD-Access: The Cisco Catalyst 9300 Series Switches form the foundational building block for SD-Access, Cisco’s lead enterprise architecture: Policy-based automation from edge to cloud
Simplified segmentation and micro-segmentation, with predictable performance and scalability
Automation through the Cisco Application Policy Infrastructure Controller Enterprise Module (APIC-EM)
Policy handled through the Cisco Identity Services Engine (ISE)
Network assurance provided through the Network Data Platform
Faster launch of new business services and significantly improved issue resolution time

SD-Access Embedded Wireless: The Cisco Catalyst 9800 Wireless Controller Software package can be installed on Cisco Catalyst 9300 series switches to enable wireless controller functionality for distributed branches and small campuses. Once installed Wireless Controller running on Catalyst 9300 can support up-to 200 APs and 4000 Clients. Maximum two Wireless Controllers can be enabled per site on two different Catalyst 9300 which will increase to scale to 400 APs and 8000 Wireless Clients. C9800 Wireless Controller Software Package will enable Wireless Functionality only for SD-Access deployments with two supported topologies : C9800 Wireless Software Package can be enabled on C9300 series switches functioning as Co-Located Border and Control Plane
C9800 Wireless Software Package can be enabled on C9300 series switches functioning as Fabric in a Box

Plug and Play (PnP) enabled: A simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network
Advanced security Encrypted Traffic Analytics (ETA): You benefit from the power of machine learning to identify and take actions toward threats or anomalies in your network, including malware detection in encrypted traffic (without decryption) and distributed anomaly detection
Support for AES-256 with the powerful MACsec 256-bit encryption algorithm available on all models
Trustworthy systems: Hardware anchored Secure Boot and Secure Unique Device Identification (SUDI) support for Plug and Play, to verify the identity of the hardware and software

Network Essentials and Advantage package features

Features on Cisco Catalyst uplink switches Network Essentials Network Advantage Switch fundamentals

Layer 2, Routed Access (RIP, EIGRP Stub, OSPF - 1000 routes), PBR, PIM Stub Multicast (1000 routes)), PVLAN, VRRP, PBR, CDP, QoS, FHS, 802.1X, MACsec-128, CoPP, SXP, IP SLA Responder, SSO Advanced switch capabilities and scale

BGP, EIGRP, HSRP, IS-IS, BSR, MSDP, PIM-BIDIR,* IP SLA, OSPF Network segmentation

VRF, VXLAN, LISP, SGT, MPLS, mVPN Automation

NETCONF, RESTCONF, gRPC, YANG, PnP Agent, ZTP/Open PnP, GuestShell (On-Box Python) Telemetry and visibility

Model-driven telemetry, sampled NetFlow, SPAN, RSPAN High availability and resiliency

Nonstop Forwarding (NSF), Graceful Insertion and Removal (GIR), Fast Software Upgrade (FSU) IOT integration

AVB, PTP, CoAP Security

MACsec-256 Cisco DNA for Switching - Subscription

A new era of secure, intelligent switching

Cisco's innovative switching solutions handle the demands of new security threats, the evolving Internet of Things (IoT), and mobility integration. Get all of these innovations with our simple, flexible software subscription suites. Cisco DNA for Switching subscriptions simplify the purchase and use of our Cisco Digital Network Architecture (Cisco DNA) capabilities.

As per Cisco's UK policy we are unable to ship any Cisco products to any address other than a company registered address as shown on Companies House.

Cisco® Catalyst® 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified.

As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey.

Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations.

With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry’s unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.





Catalyst 9200 with 48 Gigabit PoE+ Ports
4 x 1/10 G modular uplinks
740W PoE+ Budget
FRU Redundant Power Supplies and Fans


Product Highlights

48 ports of full Power over Ethernet Plus (PoE+) capability
Available PoE power with single primary power supply on: 740W
Available PoE power with additional secondary power supply: 1440W
Resiliency with Field-Replaceable Units (FRU) and redundant power supply, fans, and modular uplinks
Flexible downlink options with data or PoE+
Operational efficiency with optional backplane stacking, supporting stacking bandwidth up to 160 Gbps
ADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure
Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems
Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access
Advanced network monitoring using Full Flexible NetFlow
Cisco Software-Defined Access (SD-Access):
Simplified operations and deployment with policy-based automation from edge to cloud managed with Cisco Identity Services Engine (ISE)
Network assurance and improved resolution time through Cisco DNA Center
Plug and Play (PnP) enabled: A simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network
Cisco IOS XE: A Common Licensing based operating system for the enterprise Cisco Catalyst 9000 product family with support for model-driven programmability and streaming telemetry
ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries
Features:

Secure:

Cisco's best-in-class security portfolio is anchored by Talos, Trustworthy Solutions, MACsec encryption, and segmentation. Get advanced security features that protect the integrity of your hardware, software, and all data that flows through the switch.

Always on

Catalyst 9200 Series switches provide enterprise-level resiliency, analytics, and assurance to keep your business up and running seamlessly. FRU power supplies and fans, modular uplinks, cold patching, perpetual PoE, and the industry's highest mean time between failure (MTBF) make Catalyst 9200 Series switches stand out against other switches in their class.?

IT simplicity

Get a simple web UI or Cisco DNA Center provisioning, combined with the open APIs of Cisco IOS XE and the programmability of the UADP ASIC technology. Catalyst 9200 Series switches provide simple operation now with investment protection for future innovations.

Features on Cisco Catalyst uplink switches Network Essentials Network Advantage Switch fundamentals

Layer 2, Routed Access (RIP, EIGRP Stub, OSPF - 1000 routes), PBR, PIM Stub Multicast (1000 routes), PVLAN, VRRP, PBR, CDP, QoS, FHS, 802.1X, MACsec-128, CoPP, SXP, IP SLA Responder Advanced switch capabilities and scale

EIGRP, HSRP, IS-IS, BSR, MSDP, IP SLA, OSPF Network segmentation

VRF, VXLAN, LISP, SGT Automation

NETCONF, RESTCONF, YANG, PnP Agent, PnP Telemetry and visibility

Model-driven telemetry, sampled NetFlow, SPAN, RSPAN Security

MACsec-128 Cisco DNA for Switching - Subscription

A new era of secure, intelligent switching

Cisco's innovative switching solutions handle the demands of new security threats, the evolving Internet of Things (IoT), and mobility integration. Get all of these innovations with our simple, flexible software subscription suites. Cisco DNA for Switching subscriptions simplify the purchase and use of our Cisco Digital Network Architecture (Cisco DNA) capabilities.

As per Cisco's UK policy we are unable to ship any Cisco products to any address other than a company registered address as shown on Companies House.

The Cisco Catalyst C9300L-48T-4X-M is a powerful Meraki-managed switch designed for organizations that need high-density connectivity with centralized cloud-based control. With 48 full Gigabit Ethernet ports and four 10G uplinks, it delivers high-throughput switching for demanding network environments, while supporting advanced policy tagging and streamlined deployment through the Meraki dashboard. Its cloud-first design helps teams monitor and configure devices across locations with consistency and clarity.

Key Features 48 x 1G RJ-45 data ports + 4 x 10G SFP+ uplinks
Cloud-based management via Meraki Dashboard
320 Gbps hardware stacking with StackWise-320
Layer 3 capabilities with policy-based segmentation
Hot-swappable fans and redundant power options
Dedicated management interface for out-of-band access
Zero-touch provisioning and remote troubleshooting
Energy-efficient and rack-ready in a 1U form factor
The Catalyst 9300X-M addresses the most demanding enterprise applications by combining the simplicity of the Meraki dashboard with powerful switching hardware. To satisfy high-bandwidth applications and the deployment of high-speed wifi access points, the Catalyst 9300X-M provides multigigabit ports, 1TB stacking, and modular 10/25 or 40/100G uplinks. The Catalyst 9300X-M delivers resiliency with fast stack convergence and StackPower. The Catalyst 9300X-M provides Adaptive Policy using an over-the-wire tag which segments traffic into security groups to deliver scalable security. The Catalyst 9300X-M is integrated under the Meraki dashboard to provide a simply powerful solution to the most demanding wired access applications.

Adaptive Policy provides simple & scalable security policies to segment traffic using Security Groups. Security Groups are created in the dashboard using natural language such as “IOT device” & “Guest.” The security policy intent (e.g., Permit or Deny) is then simply provisioned between Security Groups which results in the segmentation of each group's traffic. By making security policy management intuitive and scalable relative to legacy IP-address based Access Control Lists, Adaptive Policy empowers operators to confidently secure their network traffic independent of future network changes.

Port Density Built for Scale Equipped with 48 non-PoE 1G ports, this switch is well suited for environments that require reliable copper connectivity without additional power draw. The 4 SFP+ uplinks ensure smooth aggregation to core switches or distribution layers.

Seamless Cloud Control Through the Meraki dashboard, teams gain clear visibility into switch health, port status, and traffic behavior. Configuration changes and firmware updates can be deployed remotely, reducing the need for onsite management.

Policy Enforcement at the Edge Built-in support for Adaptive Policy allows administrators to tag and segment traffic based on role, location, or device type, improving control without complicating VLAN structures.

Built for Uptime Support for hot-swappable fans and optional dual power supplies minimizes downtime during maintenance and ensures long-term hardware reliability, even in larger deployments.

Note

All current Cisco Meraki products require valid licensing to operate. Having licenses allows your organisation’s cloud-based online Dashboard, hosted by Meraki, to connect to and configure & manage all your Meraki devices. All devices are controlled under a single pane of glass in the dashboard.

As per Cisco's UK policy we are unable to ship any Cisco products to any address other than a company registered address as shown on Companies House.

The Cisco C9300-24P-M is a stackable, cloud-managed switch designed to support growing network demands with scalable architecture and intuitive management. Built to support Power over Ethernet across all 24 ports, this switch simplifies deployments while maintaining strong throughput and stacking capabilities. With Meraki cloud integration, IT teams can streamline visibility, configuration, and access control from anywhere, allowing seamless expansion without traditional overhead.

Key Features 24 x 10/100/1000 Mbps PoE+ ports with up to 30W per port
Cloud-based management via the Meraki dashboard
Dual 120 Gbps stack ports for high-performance stacking
Modular uplink options supporting 10G/40G interfaces
Support for Adaptive Policy and network segmentation
Hot-swappable fans and optional redundant power supply
Compact 1U form factor for easy rack integration
The Catalyst 9300-M addresses the most demanding enterprise applications by combining the simplicity of the Meraki dashboard with powerful switching hardware. To satisfy high-bandwidth applications and the deployment of high-speed wifi access points, the Catalyst 9300-M provides multigigabit ports, 480G stacking, and modular 10/25/40G uplinks.

The Catalyst 9300-M delivers resiliency with fast stack convergence and StackPower. The Catalyst 9300-M provides Adaptive Policy using an over-the-wire tag which segments traffic into security groups to deliver scalable security. The Catalyst 9300-M is integrated under the Meraki dashboard to provide a simply powerful solution to the most demanding wired access applications.

Adaptive Policy provides simple & scalable security policies to segment traffic using Security Groups. Security Groups are created in the dashboard using natural language such as “IOT device” & “Guest.” The security policy intent (e.g., Permit or Deny) is then simply provisioned between Security Groups which results in the segmentation of each group's traffic. By making security policy management intuitive and scalable relative to legacy IP-address based Access Control Lists, Adaptive Policy empowers operators to confidently secure their network traffic independent of future network changes.

Performance and Capacity With a total switching capacity of 208 Gbps and stacking bandwidth up to 480 Gbps, the C9300-24P-M is built to keep pace with demanding traffic loads and concurrent users. It supports high-speed data forwarding and efficient Layer 3 routing while ensuring bandwidth availability across its uplink and stack interfaces.

Power and Deployment Each of the 24 RJ-45 ports supports full PoE+ delivery, enabling deployment of devices such as access points, IP cameras, and VoIP phones without additional cabling. The available StackPower feature allows power sharing across switches in the stack, improving uptime and resource allocation.

Cloud Management via Meraki The switch is managed through the Meraki dashboard, allowing remote configuration, live troubleshooting, usage statistics, and policy management. This centralized interface brings ease to branch rollouts and day-to-day oversight, helping reduce manual intervention and complexity.

Built for Scale Designed with modular uplinks and scalable stack capacity, the C9300-24P-M integrates into mid-sized and large environments where network flexibility and visibility matter. Whether in campus, commercial, or managed service provider setups, it supports evolving infrastructure needs without changing the core hardware.

Note

All current Cisco Meraki products require valid licensing to operate. Having licenses allows your organisation’s cloud-based online Dashboard, hosted by Meraki, to connect to and configure & manage all your Meraki devices. All devices are controlled under a single pane of glass in the dashboard.

*Product may differ in appearance; Images used are for illustrative purposes only

As per Cisco's UK policy we are unable to ship any Cisco products to any address other than a company registered address as shown on Companies House.

The Cisco C9300L-48P-4X-M brings cloud-managed flexibility to high-density switching environments. Designed for scalable deployments, it combines PoE+ support, advanced uplink capability, and full cloud-based control through the Meraki dashboard. With 48 full-power ports and built-in 10G uplinks, it's built to support demanding network loads while simplifying day-to-day management.

Key Features 48 x 1 GbE PoE+ ports with up to 740W power budget
4 x fixed 10 GbE SFP+ uplinks
Cloud-managed via Meraki dashboard with centralized control
Layer 3 features including static and dynamic routing
Modular redundant power supply support
Hardware stacking support up to 320 Gbps
1U rack-mountable chassis with hot-swappable fans
Secure access via 802.1x and policy-based segmentation
The Catalyst 9300X-M addresses the most demanding enterprise applications by combining the simplicity of the Meraki dashboard with powerful switching hardware. To satisfy high-bandwidth applications and the deployment of high-speed wifi access points, the Catalyst 9300X-M provides multigigabit ports, 1TB stacking, and modular 10/25 or 40/100G uplinks. The Catalyst 9300X-M delivers resiliency with fast stack convergence and StackPower. The Catalyst 9300X-M provides Adaptive Policy using an over-the-wire tag which segments traffic into security groups to deliver scalable security. The Catalyst 9300X-M is integrated under the Meraki dashboard to provide a simply powerful solution to the most demanding wired access applications.

Adaptive Policy provides simple & scalable security policies to segment traffic using Security Groups. Security Groups are created in the dashboard using natural language such as “IOT device” & “Guest.” The security policy intent (e.g., Permit or Deny) is then simply provisioned between Security Groups which results in the segmentation of each group's traffic. By making security policy management intuitive and scalable relative to legacy IP-address based Access Control Lists, Adaptive Policy empowers operators to confidently secure their network traffic independent of future network changes.

Meraki-Managed Simplicity This switch operates entirely under the Meraki cloud architecture, giving IT admins centralized control of configurations, security policies, and performance monitoring from a single pane of glass. The Meraki license enables full access to these tools, including advanced analytics, traffic shaping, and firmware management.

Stacking and Expansion Built-in StackWise-320 support allows up to eight units to operate as one logical switch, simplifying network scaling. The optional stacking kit enables high-speed interconnectivity between switches, reducing latency and increasing failover reliability.

PoE+ for Growing Networks All 48 ports support PoE+ (802.3at), supplying power to access points, phones, cameras, and other devices without additional cabling. The switch is designed to handle full power across all ports when paired with the appropriate power supply configuration.

Performance and Design With a switching capacity of 176 Gbps and a forwarding rate of over 130 Mpps, the C9300L-48P-4X-M supports high-throughput demands. Its energy-efficient, hot-swappable fans and PSU bays ensure uptime and serviceability in live environments.

Note

All current Cisco Meraki products require valid licensing to operate. Having licenses allows your organisation’s cloud-based online Dashboard, hosted by Meraki, to connect to and configure & manage all your Meraki devices. All devices are controlled under a single pane of glass in the dashboard.

*Product may differ in appearance; Images used are for illustrative purposes only

As per Cisco's UK policy we are unable to ship any Cisco products to any address other than a company registered address as shown on Companies House.

Cisco® Catalyst® 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified.

As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey.

Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations.

With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 80 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry’s unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.





Catalyst 9200 with 48 Gigabit PoE+ Ports
4 x 1 G SFP fixed uplinks
740W PoE+ Budget
Redundant Power Supplies and Fans


Product Highlights

48 ports of full Power over Ethernet Plus (PoE+) capability
Available PoE power with single primary power supply on: 740W
Available PoE power with additional secondary power supply: 1440W
Resiliency with redundant power supplies and fans.
Flexible downlink options with data or PoE+
Operational efficiency with optional backplane stacking, supporting stacking bandwidth up to 80 Gbps
ADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure
Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems
Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access
Advanced network monitoring using Full Flexible NetFlow
Cisco Software-Defined Access (SD-Access):
Simplified operations and deployment with policy-based automation from edge to cloud managed with Cisco Identity Services Engine (ISE)
Network assurance and improved resolution time through Cisco DNA Center
Plug and Play (PnP) enabled: A simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network
Cisco IOS XE: A Common Licensing based operating system for the enterprise Cisco Catalyst 9000 product family with support for model-driven programmability and streaming telemetry
ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries
Features:

Secure:

Cisco's best-in-class security portfolio is anchored by Talos, Trustworthy Solutions, MACsec encryption, and segmentation. Get advanced security features that protect the integrity of your hardware, software, and all data that flows through the switch.

Always on

Catalyst 9200 Series switches provide enterprise-level resiliency, analytics, and assurance to keep your business up and running seamlessly. FRU power supplies and fans, modular uplinks, cold patching, perpetual PoE, and the industry's highest mean time between failure (MTBF) make Catalyst 9200 Series switches stand out against other switches in their class.

IT simplicity

Get a simple web UI or Cisco DNA Center provisioning, combined with the open APIs of Cisco IOS XE and the programmability of the UADP ASIC technology. Catalyst 9200 Series switches provide simple operation now with investment protection for future innovations.

Features on Cisco Catalyst uplink switches Network Essentials Network Advantage Switch fundamentals

Layer 2, Routed Access (RIP, EIGRP Stub, OSPF - 1000 routes), PBR, PIM Stub Multicast (1000 routes), PVLAN, VRRP, PBR, CDP, QoS, FHS, 802.1X, MACsec-128, CoPP, SXP, IP SLA Responder Advanced switch capabilities and scale

EIGRP, HSRP, IS-IS, BSR, MSDP, IP SLA, OSPF Network segmentation

VRF, VXLAN, LISP, SGT Automation

NETCONF, RESTCONF, YANG, PnP Agent, PnP Telemetry and visibility

Model-driven telemetry, sampled NetFlow, SPAN, RSPAN Security

MACsec-128 Cisco DNA for Switching - Subscription

A new era of secure, intelligent switching

Cisco's innovative switching solutions handle the demands of new security threats, the evolving Internet of Things (IoT), and mobility integration. Get all of these innovations with our simple, flexible software subscription suites. Cisco DNA for Switching subscriptions simplify the purchase and use of our Cisco Digital Network Architecture (Cisco DNA) capabilities.

As per Cisco's UK policy we are unable to ship any Cisco products to any address other than a company registered address as shown on Companies House.

The Cisco® Catalyst® 9300 Series Switches are Cisco’s lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry’s most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco’s lead enterprise architecture. At 480 Gbps, they are the industry’s highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimised platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch.

C9300-48P-A: Catalyst 9300 48-port PoE+, Network Advantage
48 × PoE+ 10/100/1000 Ports
715 Watt Power Supply
PoE Budget of 437W

Features:

Highest wireless scale with Wave 2 access points supported on a single switch with select models
UADP 2.0 Application-Specific Integrated Circuit (ASIC) with programmable pipeline and microengine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries
x86 CPU complex with 8-GB memory, and 16 GB of flash and external USB 3.0 SSD pluggable storage slot (delivering 120GB of storage with an option SSD drive) to host containers
USB 2.0 slot to load system images and set configurations
Up to 480 Gbps of local stackable switching bandwidth
Leading PoE capabilities with up to 384 ports of PoE per stack and PoE+
Intelligent Power Management with Cisco StackPower technology, providing power stacking among members for power redundancy
Line-rate, hardware-based Flexible NetFlow (FNF), delivering flow collection of up to 64,000 flows
IPv6 support in hardware, providing wire-rate forwarding for IPv6 networks
Dual-stack support for IPv4/IPv6 and dynamic hardware forwarding table allocations, for ease of IPv4-to-IPv6 migration
IEEE 802.1ba AV Bridging (AVB) built in to provide a better audio and video experience through improved time synchronization and QoS
Precision Time Protocol (PTP; IEEE 1588v2) provides accurate clock synchronisation with sub-microsecond accuracy making it suitable for distribution and synchronisation of time and frequency over network
Cisco IOS XE, a modern operating system for the enterprise with support for model-driven programmability including NETCONF, RESTCONF, YANG, on-box Python scripting, streaming telemetry, container-based application hosting, and patching for critical bug fixes. The OS also has built-in defenses to protect against runtime attacks
SD-Access: The Cisco Catalyst 9300 Series Switches form the foundational building block for SD-Access, Cisco’s lead enterprise architecture: Policy-based automation from edge to cloud
Simplified segmentation and micro-segmentation, with predictable performance and scalability
Automation through the Cisco Application Policy Infrastructure Controller Enterprise Module (APIC-EM)
Policy handled through the Cisco Identity Services Engine (ISE)
Network assurance provided through the Network Data Platform
Faster launch of new business services and significantly improved issue resolution time

SD-Access Embedded Wireless: The Cisco Catalyst 9800 Wireless Controller Software package can be installed on Cisco Catalyst 9300 series switches to enable wireless controller functionality for distributed branches and small campuses. Once installed Wireless Controller running on Catalyst 9300 can support up-to 200 APs and 4000 Clients. Maximum two Wireless Controllers can be enabled per site on two different Catalyst 9300 which will increase to scale to 400 APs and 8000 Wireless Clients. C9800 Wireless Controller Software Package will enable Wireless Functionality only for SD-Access deployments with two supported topologies : C9800 Wireless Software Package can be enabled on C9300 series switches functioning as Co-Located Border and Control Plane
C9800 Wireless Software Package can be enabled on C9300 series switches functioning as Fabric in a Box

Plug and Play (PnP) enabled: A simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network
Advanced security Encrypted Traffic Analytics (ETA): You benefit from the power of machine learning to identify and take actions toward threats or anomalies in your network, including malware detection in encrypted traffic (without decryption) and distributed anomaly detection
Support for AES-256 with the powerful MACsec 256-bit encryption algorithm available on all models
Trustworthy systems: Hardware anchored Secure Boot and Secure Unique Device Identification (SUDI) support for Plug and Play, to verify the identity of the hardware and software

Network Essentials and Advantage package features

Features on Cisco Catalyst uplink switches Network Essentials Network Advantage Switch fundamentals

Layer 2, Routed Access (RIP, EIGRP Stub, OSPF - 1000 routes), PBR, PIM Stub Multicast (1000 routes)), PVLAN, VRRP, PBR, CDP, QoS, FHS, 802.1X, MACsec-128, CoPP, SXP, IP SLA Responder, SSO Advanced switch capabilities and scale

BGP, EIGRP, HSRP, IS-IS, BSR, MSDP, PIM-BIDIR,* IP SLA, OSPF Network segmentation

VRF, VXLAN, LISP, SGT, MPLS, mVPN Automation

NETCONF, RESTCONF, gRPC, YANG, PnP Agent, ZTP/Open PnP, GuestShell (On-Box Python) Telemetry and visibility

Model-driven telemetry, sampled NetFlow, SPAN, RSPAN High availability and resiliency

Nonstop Forwarding (NSF), Graceful Insertion and Removal (GIR), Fast Software Upgrade (FSU) IOT integration

AVB, PTP, CoAP Security

MACsec-256 Cisco DNA for Switching - Subscription

A new era of secure, intelligent switching

Cisco's innovative switching solutions handle the demands of new security threats, the evolving Internet of Things (IoT), and mobility integration. Get all of these innovations with our simple, flexible software subscription suites. Cisco DNA for Switching subscriptions simplify the purchase and use of our Cisco Digital Network Architecture (Cisco DNA) capabilities.

As per Cisco's UK policy we are unable to ship any Cisco products to any address other than a company registered address as shown on Companies House.

The C9300L-48PF-4X-M brings high-efficiency switching and full PoE+ support into a single, manageable system. Designed to support dense access layer deployments, it integrates advanced network capabilities with Meraki cloud visibility. Its four dedicated 10G uplinks ensure high-speed connectivity across your infrastructure while maintaining seamless management and configuration from a central dashboard. This switch supports critical access networks with reliable performance and a straightforward deployment path.

Key Features 48 x 1G PoE+ access ports with 30W per port power output
4 x 10G SFP+ uplinks for high-throughput aggregation
Cloud-managed interface through Cisco Meraki dashboard
StackWise-320 support for up to 320 Gbps of stacking bandwidth
Hot-swappable redundant power and fans
Layer 3 routing capabilities with advanced policy options
Integrated power supply providing up to 890W PoE budget
The Catalyst 9300X-M addresses the most demanding enterprise applications by combining the simplicity of the Meraki dashboard with powerful switching hardware. To satisfy high-bandwidth applications and the deployment of high-speed wifi access points, the Catalyst 9300X-M provides multigigabit ports, 1TB stacking, and modular 10/25 or 40/100G uplinks. The Catalyst 9300X-M delivers resiliency with fast stack convergence and StackPower. The Catalyst 9300X-M provides Adaptive Policy using an over-the-wire tag which segments traffic into security groups to deliver scalable security. The Catalyst 9300X-M is integrated under the Meraki dashboard to provide a simply powerful solution to the most demanding wired access applications.

Adaptive Policy provides simple & scalable security policies to segment traffic using Security Groups. Security Groups are created in the dashboard using natural language such as “IOT device” & “Guest.” The security policy intent (e.g., Permit or Deny) is then simply provisioned between Security Groups which results in the segmentation of each group's traffic. By making security policy management intuitive and scalable relative to legacy IP-address based Access Control Lists, Adaptive Policy empowers operators to confidently secure their network traffic independent of future network changes.

Performance Where It Counts This switch delivers up to 176 Gbps of switching capacity and supports over 130 million packets per second. It's engineered for access networks that demand uninterrupted throughput without sacrificing control or stability.

Designed for Flexibility Whether it's powering devices, linking network zones through fiber uplinks, or scaling with other switches via stacking, the C9300L-48PF-4X-M adapts to your layout and grows with your environment.

Centralized Cloud Management Get complete network visibility, control access policies, monitor power usage, and deploy updates through the Meraki dashboard, no need for additional software or complex CLI commands.

Note

All current Cisco Meraki products require valid licensing to operate. Having licenses allows your organisation’s cloud-based online Dashboard, hosted by Meraki, to connect to and configure & manage all your Meraki devices. All devices are controlled under a single pane of glass in the dashboard.

*Product may differ in appearance; Images used are for illustrative purposes only

As per Cisco's UK policy we are unable to ship any Cisco products to any address other than a company registered address as shown on Companies House.

The Cisco® Catalyst® 9300 Series Switches are Cisco’s lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry’s most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco’s lead enterprise architecture. At 480 Gbps, they are the industry’s highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimised platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch.

Catalyst 9300 48-port PoE+, Network Essentials
48 × PoE+ 10/100/1000 Ports
715 Watt Power Supply
PoE Budget of 473W

Features:

Highest wireless scale with Wave 2 access points supported on a single switch with select models
UADP 2.0 Application-Specific Integrated Circuit (ASIC) with programmable pipeline and microengine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries
x86 CPU complex with 8-GB memory, and 16 GB of flash and external USB 3.0 SSD pluggable storage slot (delivering 120GB of storage with an option SSD drive) to host containers
USB 2.0 slot to load system images and set configurations
Up to 480 Gbps of local stackable switching bandwidth
Leading PoE capabilities with up to 384 ports of PoE per stack and PoE+
Intelligent Power Management with Cisco StackPower technology, providing power stacking among members for power redundancy
Line-rate, hardware-based Flexible NetFlow (FNF), delivering flow collection of up to 64,000 flows
IPv6 support in hardware, providing wire-rate forwarding for IPv6 networks
Dual-stack support for IPv4/IPv6 and dynamic hardware forwarding table allocations, for ease of IPv4-to-IPv6 migration
IEEE 802.1ba AV Bridging (AVB) built in to provide a better audio and video experience through improved time synchronization and QoS
Precision Time Protocol (PTP; IEEE 1588v2) provides accurate clock synchronisation with sub-microsecond accuracy making it suitable for distribution and synchronisation of time and frequency over network
Cisco IOS XE, a modern operating system for the enterprise with support for model-driven programmability including NETCONF, RESTCONF, YANG, on-box Python scripting, streaming telemetry, container-based application hosting, and patching for critical bug fixes. The OS also has built-in defenses to protect against runtime attacks
SD-Access: The Cisco Catalyst 9300 Series Switches form the foundational building block for SD-Access, Cisco’s lead enterprise architecture: Policy-based automation from edge to cloud
Simplified segmentation and micro-segmentation, with predictable performance and scalability
Automation through the Cisco Application Policy Infrastructure Controller Enterprise Module (APIC-EM)
Policy handled through the Cisco Identity Services Engine (ISE)
Network assurance provided through the Network Data Platform
Faster launch of new business services and significantly improved issue resolution time

SD-Access Embedded Wireless: The Cisco Catalyst 9800 Wireless Controller Software package can be installed on Cisco Catalyst 9300 series switches to enable wireless controller functionality for distributed branches and small campuses. Once installed Wireless Controller running on Catalyst 9300 can support up-to 200 APs and 4000 Clients. Maximum two Wireless Controllers can be enabled per site on two different Catalyst 9300 which will increase to scale to 400 APs and 8000 Wireless Clients. C9800 Wireless Controller Software Package will enable Wireless Functionality only for SD-Access deployments with two supported topologies : C9800 Wireless Software Package can be enabled on C9300 series switches functioning as Co-Located Border and Control Plane
C9800 Wireless Software Package can be enabled on C9300 series switches functioning as Fabric in a Box

Plug and Play (PnP) enabled: A simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network
Advanced security Encrypted Traffic Analytics (ETA): You benefit from the power of machine learning to identify and take actions toward threats or anomalies in your network, including malware detection in encrypted traffic (without decryption) and distributed anomaly detection
Support for AES-256 with the powerful MACsec 256-bit encryption algorithm available on all models
Trustworthy systems: Hardware anchored Secure Boot and Secure Unique Device Identification (SUDI) support for Plug and Play, to verify the identity of the hardware and software

Network Essentials and Advantage package features

Features on Cisco Catalyst uplink switches Network Essentials Network Advantage Switch fundamentals

Layer 2, Routed Access (RIP, EIGRP Stub, OSPF - 1000 routes), PBR, PIM Stub Multicast (1000 routes)), PVLAN, VRRP, PBR, CDP, QoS, FHS, 802.1X, MACsec-128, CoPP, SXP, IP SLA Responder, SSO Advanced switch capabilities and scale

BGP, EIGRP, HSRP, IS-IS, BSR, MSDP, PIM-BIDIR,* IP SLA, OSPF Network segmentation

VRF, VXLAN, LISP, SGT, MPLS, mVPN Automation

NETCONF, RESTCONF, gRPC, YANG, PnP Agent, ZTP/Open PnP, GuestShell (On-Box Python) Telemetry and visibility

Model-driven telemetry, sampled NetFlow, SPAN, RSPAN High availability and resiliency

Nonstop Forwarding (NSF), Graceful Insertion and Removal (GIR), Fast Software Upgrade (FSU) IOT integration

AVB, PTP, CoAP Security

MACsec-256 Cisco DNA for Switching - Subscription

A new era of secure, intelligent switching

Cisco's innovative switching solutions handle the demands of new security threats, the evolving Internet of Things (IoT), and mobility integration. Get all of these innovations with our simple, flexible software subscription suites. Cisco DNA for Switching subscriptions simplify the purchase and use of our Cisco Digital Network Architecture (Cisco DNA) capabilities.

As per Cisco's UK policy we are unable to ship any Cisco products to any address other than a company registered address as shown on Companies House.

Cisco® Catalyst® 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified.

As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey.

Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations.

With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry’s unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.





Catalyst 9200 with 48 Gigabit PoE+ Ports
4 x 1/10 G modular uplinks
740W PoE+ Budget
FRU Redundant Power Supplies and Fans


Product Highlights

48 ports of full Power over Ethernet Plus (PoE+) capability
Available PoE power with single primary power supply on: 740W
Available PoE power with additional secondary power supply: 1440W
Resiliency with Field-Replaceable Units (FRU) and redundant power supply, fans, and modular uplinks
Flexible downlink options with data or PoE+
Operational efficiency with optional backplane stacking, supporting stacking bandwidth up to 160 Gbps
ADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure
Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems
Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access
Advanced network monitoring using Full Flexible NetFlow
Cisco Software-Defined Access (SD-Access):
Simplified operations and deployment with policy-based automation from edge to cloud managed with Cisco Identity Services Engine (ISE)
Network assurance and improved resolution time through Cisco DNA Center
Plug and Play (PnP) enabled: A simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network
Cisco IOS XE: A Common Licensing based operating system for the enterprise Cisco Catalyst 9000 product family with support for model-driven programmability and streaming telemetry
ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries
Features:

Secure:

Cisco's best-in-class security portfolio is anchored by Talos, Trustworthy Solutions, MACsec encryption, and segmentation. Get advanced security features that protect the integrity of your hardware, software, and all data that flows through the switch.

Always on

Catalyst 9200 Series switches provide enterprise-level resiliency, analytics, and assurance to keep your business up and running seamlessly. FRU power supplies and fans, modular uplinks, cold patching, perpetual PoE, and the industry's highest mean time between failure (MTBF) make Catalyst 9200 Series switches stand out against other switches in their class.?

IT simplicity

Get a simple web UI or Cisco DNA Center provisioning, combined with the open APIs of Cisco IOS XE and the programmability of the UADP ASIC technology. Catalyst 9200 Series switches provide simple operation now with investment protection for future innovations.

Features on Cisco Catalyst uplink switches Network Essentials Network Advantage Switch fundamentals

Layer 2, Routed Access (RIP, EIGRP Stub, OSPF - 1000 routes), PBR, PIM Stub Multicast (1000 routes), PVLAN, VRRP, PBR, CDP, QoS, FHS, 802.1X, MACsec-128, CoPP, SXP, IP SLA Responder Advanced switch capabilities and scale

EIGRP, HSRP, IS-IS, BSR, MSDP, IP SLA, OSPF Network segmentation

VRF, VXLAN, LISP, SGT Automation

NETCONF, RESTCONF, YANG, PnP Agent, PnP Telemetry and visibility

Model-driven telemetry, sampled NetFlow, SPAN, RSPAN Security

MACsec-128 Cisco DNA for Switching - Subscription

A new era of secure, intelligent switching

Cisco's innovative switching solutions handle the demands of new security threats, the evolving Internet of Things (IoT), and mobility integration. Get all of these innovations with our simple, flexible software subscription suites. Cisco DNA for Switching subscriptions simplify the purchase and use of our Cisco Digital Network Architecture (Cisco DNA) capabilities.

As per Cisco's UK policy we are unable to ship any Cisco products to any address other than a company registered address as shown on Companies House.

The Cisco Meraki MS210-24P-HW is a 24 Port PoE Gigabit Switch providing Layer 2 access switching for branch and small campus locations. The MS210-24P-HW includes 4 x 1G SFP uplinks and physically stacks with the MS225 to gain access to its 10G uplink. This family also supports an optional, rack-mountable PSU (Cisco RPS-2300) for power redundancy requirements



Meraki switches are built from the ground up to be easy to manage without compromising any of the power and flexibility traditionally found in enterprise-class switches. Cisco Meraki switches are managed through an elegant, intuitive cloud interface, rather than a cryptic command line. To bring up a Meraki switch, just plug it in; there’s no need for complicated configuration files - or pre-staging.
In addition, Meraki’s centralised management system gives administrators deep visibility into the network and how it’s used. See which switches are near capacity across hundreds of sites. Find all configuration changes made by a certain person with instant search.

Features:

Cloud management has a number of benefits that make it easier to build networks large and small:

24 Port Gigabit Ethernet Switch with 4 × SFP for 1G uplink, non-shared.
370 watt PoE budget with PoE+ support and dynamic power allocation for powering APs, phones, cameras, and other PoE-enabled devices
Built-in dual stacking interfaces with up to 80G bandwidth
Single pane of glass management of distributed switch deployments, wireless APs, and firewalls across multiple sites through the browser.
Low power consumption and shallow rack depth options, enabling flexible deployment in wiring closets as well as offices and classrooms
Layer 7 OS, client, and host-name fingerprinting.
Access to 10G uplink by physically stacking with the MS225
E-mail and SMS (text) alerts upon power loss, downtime, or configuration changes.
6 dedicated QoS queues for converged voice, video and data applications
Integrated mounting brackets for rack and desk mounting
Lifetime hardware warranty and advanced replacement at no additional cost








Centrally Managed from the Cloud The Cisco Meraki Cloud Networking architecture enables plug and play branch deployments and provides centralised visibility and control across any number of distributed locations.

The Cisco Meraki MS is the industry’s first cloud managed switch, combining the benefits of cloud-based centralised management with a powerful, reliable access platform.

With cloud management, thousands of switch ports can be configured and monitored instantly, over the web. Provision remote sites without on-site IT, deploy network-wide configuration changes, and easily manage campus and distributed networks without training or dedicated staff.



Virtual Stacking Meraki MS Switches feature virtual stacking — an industry first — that allows management of thousands of switch ports as one, without requiring a physical connection between switches.

Quickly find and configure switch ports across your entire network, even those in geographically-distributed locations. Easily configure ports for access devices, assign voice VLANs, control PoE, and more, with a few simple clicks and without complex CLI instructions.

Virtual stacking is built-in to all Meraki MS Switches, with no need for extension modules, proprietary cables, or extra configuration. Simply log in to the Cisco Meraki dashboard and manage the entire access switch infrastructure without concern for their interconnectivity.



Layer 7 Application and Client Visibility Meraki MS Switches are the industry's only switches featuring integrated Layer 7 application and client fingerprinting and analysis. Hundreds of applications are automatically identified and reported, from business apps to BitTorrent and YouTube, so administrators can see where resources are spent.

Device fingerprinting with Google-like search allows administrators to easily find and identify individual users, iPads, Androids, and other devices. Search for devices across the entire network right from the Meraki dashboard, no matter which switch a device connects to.



Layer 3 Scalability & Failover Quickly scale growing networks while ensuring redundancy for critical switch infrastructure with Meraki layer 3 switches. Intuitive, dynamic routing configurable in the dashboard simplifies management by removing complex command line interfaces. Traffic flow is optimised at line rate without sacrificing deep visibility into client devices and application use. Deploy ACLs directly on MS switches to secure boundaries between VLANs, hosts, services, and the Internet.

In addition to dynamic routing, layer 3 Meraki MS switches support VRRP for warm spare failover, ensuring immediate recovery of gateway responsibilities—avoiding downtime and client disruption.




QoS for Voice and Video Deploy latency-sensitive applications such as voice and video by guaranteeing network performance. Voice and QoS features such as per-VLAN and protocol-based prioritisation, as well as flexible QoS assignments, give intuitive, granular control.

Intelligent use of LLDP on the network makes deploying devices such as VoIP phones painless. Simply select a VLAN for voice in the dashboard, and selected ports will accept tagged traffic on the voice VLAN. The port also uses LLDP advertisements to recommend devices use that VLAN for voice traffic.



Network Topology Meraki MS Switches include dynamic network topology that automatically maps network architectures, showing how Meraki security, switching, and wireless devices are connected.

Quickly see the status of the devices in your network, find specific devices by name or tags, see how many clients traverse links, and see where traffic flows over the network.

Built-in network topology requires no additional hardware or software.



Remote Live Tools and Alerts MS Switches make powerful live tools available for remote troubleshooting at any time. From infrastructure uptime and performance testing to device troubleshooting, live tools simplify day-to-day network administration and dramatically shorten time to resolution.

Built-in Ethernet cable testing no longer requires an excursion to one or more switch closets just to verify cable integrity. Simply select a switch port, run a cable test, and see results right in the dashboard, even if there is no device connected on the other end.

Each Meraki MS is automatically monitored 24×7 via the cloud. Email and text message alerts are configurable to immediately notify administrators of configuration changes, switch downtime, and even per-port disconnection events



Enterprise Security Extending security down to the port level has never been easier. MS Switches integrate seamlessly with enterprise-grade security systems using 802.1X. Define access policies, segregate guest devices, and quarantine entire environments right from the dashboard.

Applying policies on many ports takes just a few clicks — even if the ports are spread across many switches. Simply search to find the ports of interest, click to apply the desired policies, and save your changes. Policies are pushed immediately to the desired ports.

Seamless firmware updates, two factor authentication, and other built-in protections make secure, PCI and HIPAA-compliant networks easy and cost effective

As per Cisco's UK policy we are unable to ship any Cisco products to any address other than a company registered address as shown on Companies House.

Cloud Managed Stackable Access Switch

The Cisco Meraki MS225-24P is a 24 port PoE+ switch which provides layer 2 access switching and is ideal for deploying to branch locations. With stacking capabilities and 10G SFP+ uplinks, performance is guaranteed. This family also supports an optional, rack-mountable remote PSU (Cisco RPS-2300) for power redundancy requirements

Cisco Meraki switches are built from the ground up to be easy to manage without compromising any of the power and flexibility traditionally found in enterprise-class switches.

The Meraki MS is managed through an elegant, intuitive cloud interface, rather than a cryptic command line. To bring up a Meraki switch, just plug it in; there’s no need for complicated configuration files, or even direct physical access to the switch.

Meraki’s centralised management gives administrators deep visibility into the network and how it’s used. See which switches are near capacity across hundreds of sites. Find all configuration changes made by a certain person with instant search.



Industry Leading Cloud Management

Cloud management has a number of benefits that make it easier to build networks large and small:

True zero-touch device provisioning
Virtual stacking: manage up to thousands of ports from a single pane of glass.
Application layer visibility with automatic operating system, client, and hostname fingerprinting.
Powerful Live Tools such as packet capture and cable test to isolate and troubleshoot network issues.
Alerts upon power loss, downtime, or configuration changes.
Role-based administration and automatic, scheduled firmware upgrades over the web.
Regular feature updates and enhancements delivered on demand from the Meraki cloud.
Features:

24 Port Gigabit Access switching
4 x 10G SFP+ uplink interface
Built-in dual stacking interfaces with up to 80G bandwidth
Non-blocking switch backplane with up to 128 Gbps bandwidth support
8 dedicated QoS queues for converged voice, video, and data applications
Up to 370 watt PoE budget with PoE+ support and dynamic power allocation for powering APs, phones, cameras, and other PoE-enabled devices
Low power consumption, quiet acoustic design, and shallow rack depth options, enabling flexible deployment in wiring closets as well as offices and classrooms
Integrated mounting brackets for rack and desk mounting
Lifetime hardware warranty and advanced replacement at no additional cost








Centrally Managed from the Cloud The Cisco Meraki Cloud Networking architecture enables plug and play branch deployments and provides centralised visibility and control across any number of distributed locations.

The Cisco Meraki MS is the industry’s first cloud managed switch, combining the benefits of cloud-based centralised management with a powerful, reliable access platform.

With cloud management, thousands of switch ports can be configured and monitored instantly, over the web. Provision remote sites without on-site IT, deploy network-wide configuration changes, and easily manage campus and distributed networks without training or dedicated staff.



Virtual Stacking Meraki MS Switches feature virtual stacking — an industry first — that allows management of thousands of switch ports as one, without requiring a physical connection between switches.

Quickly find and configure switch ports across your entire network, even those in geographically-distributed locations. Easily configure ports for access devices, assign voice VLANs, control PoE, and more, with a few simple clicks and without complex CLI instructions.

Virtual stacking is built-in to all Meraki MS Switches, with no need for extension modules, proprietary cables, or extra configuration. Simply log in to the Cisco Meraki dashboard and manage the entire access switch infrastructure without concern for their interconnectivity.



Layer 7 Application and Client Visibility Meraki MS Switches are the industry's only switches featuring integrated Layer 7 application and client fingerprinting and analysis. Hundreds of applications are automatically identified and reported, from business apps to BitTorrent and YouTube, so administrators can see where resources are spent.

Device fingerprinting with Google-like search allows administrators to easily find and identify individual users, iPads, Androids, and other devices. Search for devices across the entire network right from the Meraki dashboard, no matter which switch a device connects to.



Layer 3 Scalability & Failover Quickly scale growing networks while ensuring redundancy for critical switch infrastructure with Meraki layer 3 switches. Intuitive, dynamic routing configurable in the dashboard simplifies management by removing complex command line interfaces. Traffic flow is optimised at line rate without sacrificing deep visibility into client devices and application use. Deploy ACLs directly on MS switches to secure boundaries between VLANs, hosts, services, and the Internet.

In addition to dynamic routing, layer 3 Meraki MS switches support VRRP for warm spare failover, ensuring immediate recovery of gateway responsibilities—avoiding downtime and client disruption.




QoS for Voice and Video Deploy latency-sensitive applications such as voice and video by guaranteeing network performance. Voice and QoS features such as per-VLAN and protocol-based prioritisation, as well as flexible QoS assignments, give intuitive, granular control.

Intelligent use of LLDP on the network makes deploying devices such as VoIP phones painless. Simply select a VLAN for voice in the dashboard, and selected ports will accept tagged traffic on the voice VLAN. The port also uses LLDP advertisements to recommend devices use that VLAN for voice traffic.



Network Topology Meraki MS Switches include dynamic network topology that automatically maps network architectures, showing how Meraki security, switching, and wireless devices are connected.

Quickly see the status of the devices in your network, find specific devices by name or tags, see how many clients traverse links, and see where traffic flows over the network.

Built-in network topology requires no additional hardware or software.



Remote Live Tools and Alerts MS Switches make powerful live tools available for remote troubleshooting at any time. From infrastructure uptime and performance testing to device troubleshooting, live tools simplify day-to-day network administration and dramatically shorten time to resolution.

Built-in Ethernet cable testing no longer requires an excursion to one or more switch closets just to verify cable integrity. Simply select a switch port, run a cable test, and see results right in the dashboard, even if there is no device connected on the other end.

Each Meraki MS is automatically monitored 24×7 via the cloud. Email and text message alerts are configurable to immediately notify administrators of configuration changes, switch downtime, and even per-port disconnection events



Enterprise Security Extending security down to the port level has never been easier. MS Switches integrate seamlessly with enterprise-grade security systems using 802.1X. Define access policies, segregate guest devices, and quarantine entire environments right from the dashboard.

Applying policies on many ports takes just a few clicks — even if the ports are spread across many switches. Simply search to find the ports of interest, click to apply the desired policies, and save your changes. Policies are pushed immediately to the desired ports.

Seamless firmware updates, two factor authentication, and other built-in protections make secure, PCI and HIPAA-compliant networks easy and cost effective

As per Cisco's UK policy we are unable to ship any Cisco products to any address other than a company registered address as shown on Companies House.

The Cisco Meraki MS210-48LP-HW is a 48 Port PoE Gigabit Switch providing Layer 2 access switching for branch and small campus locations. The MS210-48LP-HW includes 4 x 1G SFP uplinks and physically stacks with the MS225 to gain access to its 10G uplink. This family also supports an optional, rack-mountable PSU (Cisco RPS-2300) for power redundancy requirements



Meraki switches are built from the ground up to be easy to manage without compromising any of the power and flexibility traditionally found in enterprise-class switches. Cisco Meraki switches are managed through an elegant, intuitive cloud interface, rather than a cryptic command line. To bring up a Meraki switch, just plug it in; there’s no need for complicated configuration files - or pre-staging.
In addition, Meraki’s centralised management system gives administrators deep visibility into the network and how it’s used. See which switches are near capacity across hundreds of sites. Find all configuration changes made by a certain person with instant search.

Features:

Cloud management has a number of benefits that make it easier to build networks large and small:

48 Port Gigabit Ethernet Switch with 4 × SFP for 1G uplink, non-shared.
370 watt PoE budget with PoE+ support and dynamic power allocation for powering APs, phones, cameras, and other PoE-enabled devices
Built-in dual stacking interfaces with up to 80G bandwidth
Single pane of glass management of distributed switch deployments, wireless APs, and firewalls across multiple sites through the browser.
Low power consumption and shallow rack depth options, enabling flexible deployment in wiring closets as well as offices and classrooms
Layer 7 OS, client, and host-name fingerprinting.
Access to 10G uplink by physically stacking with the MS225
E-mail and SMS (text) alerts upon power loss, downtime, or configuration changes.
6 dedicated QoS queues for converged voice, video and data applications
Integrated mounting brackets for rack and desk mounting
Lifetime hardware warranty and advanced replacement at no additional cost








Centrally Managed from the Cloud The Cisco Meraki Cloud Networking architecture enables plug and play branch deployments and provides centralised visibility and control across any number of distributed locations.

The Cisco Meraki MS is the industry’s first cloud managed switch, combining the benefits of cloud-based centralised management with a powerful, reliable access platform.

With cloud management, thousands of switch ports can be configured and monitored instantly, over the web. Provision remote sites without on-site IT, deploy network-wide configuration changes, and easily manage campus and distributed networks without training or dedicated staff.



Virtual Stacking Meraki MS Switches feature virtual stacking — an industry first — that allows management of thousands of switch ports as one, without requiring a physical connection between switches.

Quickly find and configure switch ports across your entire network, even those in geographically-distributed locations. Easily configure ports for access devices, assign voice VLANs, control PoE, and more, with a few simple clicks and without complex CLI instructions.

Virtual stacking is built-in to all Meraki MS Switches, with no need for extension modules, proprietary cables, or extra configuration. Simply log in to the Cisco Meraki dashboard and manage the entire access switch infrastructure without concern for their interconnectivity.



Layer 7 Application and Client Visibility Meraki MS Switches are the industry's only switches featuring integrated Layer 7 application and client fingerprinting and analysis. Hundreds of applications are automatically identified and reported, from business apps to BitTorrent and YouTube, so administrators can see where resources are spent.

Device fingerprinting with Google-like search allows administrators to easily find and identify individual users, iPads, Androids, and other devices. Search for devices across the entire network right from the Meraki dashboard, no matter which switch a device connects to.



Layer 3 Scalability & Failover Quickly scale growing networks while ensuring redundancy for critical switch infrastructure with Meraki layer 3 switches. Intuitive, dynamic routing configurable in the dashboard simplifies management by removing complex command line interfaces. Traffic flow is optimised at line rate without sacrificing deep visibility into client devices and application use. Deploy ACLs directly on MS switches to secure boundaries between VLANs, hosts, services, and the Internet.

In addition to dynamic routing, layer 3 Meraki MS switches support VRRP for warm spare failover, ensuring immediate recovery of gateway responsibilities—avoiding downtime and client disruption.




QoS for Voice and Video Deploy latency-sensitive applications such as voice and video by guaranteeing network performance. Voice and QoS features such as per-VLAN and protocol-based prioritisation, as well as flexible QoS assignments, give intuitive, granular control.

Intelligent use of LLDP on the network makes deploying devices such as VoIP phones painless. Simply select a VLAN for voice in the dashboard, and selected ports will accept tagged traffic on the voice VLAN. The port also uses LLDP advertisements to recommend devices use that VLAN for voice traffic.



Network Topology Meraki MS Switches include dynamic network topology that automatically maps network architectures, showing how Meraki security, switching, and wireless devices are connected.

Quickly see the status of the devices in your network, find specific devices by name or tags, see how many clients traverse links, and see where traffic flows over the network.

Built-in network topology requires no additional hardware or software.



Remote Live Tools and Alerts MS Switches make powerful live tools available for remote troubleshooting at any time. From infrastructure uptime and performance testing to device troubleshooting, live tools simplify day-to-day network administration and dramatically shorten time to resolution.

Built-in Ethernet cable testing no longer requires an excursion to one or more switch closets just to verify cable integrity. Simply select a switch port, run a cable test, and see results right in the dashboard, even if there is no device connected on the other end.

Each Meraki MS is automatically monitored 24×7 via the cloud. Email and text message alerts are configurable to immediately notify administrators of configuration changes, switch downtime, and even per-port disconnection events



Enterprise Security Extending security down to the port level has never been easier. MS Switches integrate seamlessly with enterprise-grade security systems using 802.1X. Define access policies, segregate guest devices, and quarantine entire environments right from the dashboard.

Applying policies on many ports takes just a few clicks — even if the ports are spread across many switches. Simply search to find the ports of interest, click to apply the desired policies, and save your changes. Policies are pushed immediately to the desired ports.

Seamless firmware updates, two factor authentication, and other built-in protections make secure, PCI and HIPAA-compliant networks easy and cost effective

As per Cisco's UK policy we are unable to ship any Cisco products to any address other than a company registered address as shown on Companies House.

The Cisco Meraki MS210-48FP-HW is a 48 Port PoE Gigabit Switch providing Layer 2 access switching for branch and small campus locations. The MS210-48FP-HW includes 4 x 1G SFP uplinks and physically stacks with the MS225 to gain access to its 10G uplink. This family also supports an optional, rack-mountable PSU (Cisco RPS-2300) for power redundancy requirements



Meraki switches are built from the ground up to be easy to manage without compromising any of the power and flexibility traditionally found in enterprise-class switches. Cisco Meraki switches are managed through an elegant, intuitive cloud interface, rather than a cryptic command line. To bring up a Meraki switch, just plug it in; there’s no need for complicated configuration files - or pre-staging.
In addition, Meraki’s centralised management system gives administrators deep visibility into the network and how it’s used. See which switches are near capacity across hundreds of sites. Find all configuration changes made by a certain person with instant search.

Features:

Cloud management has a number of benefits that make it easier to build networks large and small:

48 Port Gigabit Ethernet Switch with 4 × SFP for 1G uplink, non-shared.
740 watt PoE budget with PoE+ support and dynamic power allocation for powering APs, phones, cameras, and other PoE-enabled devices
Built-in dual stacking interfaces with up to 80G bandwidth
Single pane of glass management of distributed switch deployments, wireless APs, and firewalls across multiple sites through the browser.
Low power consumption and shallow rack depth options, enabling flexible deployment in wiring closets as well as offices and classrooms
Layer 7 OS, client, and host-name fingerprinting.
Access to 10G uplink by physically stacking with the MS225
E-mail and SMS (text) alerts upon power loss, downtime, or configuration changes.
6 dedicated QoS queues for converged voice, video and data applications
Integrated mounting brackets for rack and desk mounting
Lifetime hardware warranty and advanced replacement at no additional cost








Centrally Managed from the Cloud The Cisco Meraki Cloud Networking architecture enables plug and play branch deployments and provides centralised visibility and control across any number of distributed locations.

The Cisco Meraki MS is the industry’s first cloud managed switch, combining the benefits of cloud-based centralised management with a powerful, reliable access platform.

With cloud management, thousands of switch ports can be configured and monitored instantly, over the web. Provision remote sites without on-site IT, deploy network-wide configuration changes, and easily manage campus and distributed networks without training or dedicated staff.



Virtual Stacking Meraki MS Switches feature virtual stacking — an industry first — that allows management of thousands of switch ports as one, without requiring a physical connection between switches.

Quickly find and configure switch ports across your entire network, even those in geographically-distributed locations. Easily configure ports for access devices, assign voice VLANs, control PoE, and more, with a few simple clicks and without complex CLI instructions.

Virtual stacking is built-in to all Meraki MS Switches, with no need for extension modules, proprietary cables, or extra configuration. Simply log in to the Cisco Meraki dashboard and manage the entire access switch infrastructure without concern for their interconnectivity.



Layer 7 Application and Client Visibility Meraki MS Switches are the industry's only switches featuring integrated Layer 7 application and client fingerprinting and analysis. Hundreds of applications are automatically identified and reported, from business apps to BitTorrent and YouTube, so administrators can see where resources are spent.

Device fingerprinting with Google-like search allows administrators to easily find and identify individual users, iPads, Androids, and other devices. Search for devices across the entire network right from the Meraki dashboard, no matter which switch a device connects to.



Layer 3 Scalability & Failover Quickly scale growing networks while ensuring redundancy for critical switch infrastructure with Meraki layer 3 switches. Intuitive, dynamic routing configurable in the dashboard simplifies management by removing complex command line interfaces. Traffic flow is optimised at line rate without sacrificing deep visibility into client devices and application use. Deploy ACLs directly on MS switches to secure boundaries between VLANs, hosts, services, and the Internet.

In addition to dynamic routing, layer 3 Meraki MS switches support VRRP for warm spare failover, ensuring immediate recovery of gateway responsibilities—avoiding downtime and client disruption.




QoS for Voice and Video Deploy latency-sensitive applications such as voice and video by guaranteeing network performance. Voice and QoS features such as per-VLAN and protocol-based prioritisation, as well as flexible QoS assignments, give intuitive, granular control.

Intelligent use of LLDP on the network makes deploying devices such as VoIP phones painless. Simply select a VLAN for voice in the dashboard, and selected ports will accept tagged traffic on the voice VLAN. The port also uses LLDP advertisements to recommend devices use that VLAN for voice traffic.



Network Topology Meraki MS Switches include dynamic network topology that automatically maps network architectures, showing how Meraki security, switching, and wireless devices are connected.

Quickly see the status of the devices in your network, find specific devices by name or tags, see how many clients traverse links, and see where traffic flows over the network.

Built-in network topology requires no additional hardware or software.



Remote Live Tools and Alerts MS Switches make powerful live tools available for remote troubleshooting at any time. From infrastructure uptime and performance testing to device troubleshooting, live tools simplify day-to-day network administration and dramatically shorten time to resolution.

Built-in Ethernet cable testing no longer requires an excursion to one or more switch closets just to verify cable integrity. Simply select a switch port, run a cable test, and see results right in the dashboard, even if there is no device connected on the other end.

Each Meraki MS is automatically monitored 24×7 via the cloud. Email and text message alerts are configurable to immediately notify administrators of configuration changes, switch downtime, and even per-port disconnection events



Enterprise Security Extending security down to the port level has never been easier. MS Switches integrate seamlessly with enterprise-grade security systems using 802.1X. Define access policies, segregate guest devices, and quarantine entire environments right from the dashboard.

Applying policies on many ports takes just a few clicks — even if the ports are spread across many switches. Simply search to find the ports of interest, click to apply the desired policies, and save your changes. Policies are pushed immediately to the desired ports.

Seamless firmware updates, two factor authentication, and other built-in protections make secure, PCI and HIPAA-compliant networks easy and cost effective

As per Cisco's UK policy we are unable to ship any Cisco products to any address other than a company registered address as shown on Companies House.

Cloud Managed Stackable Access Switch

The Cisco Meraki MS225-48LP is a 48 port PoE+ switch with a PoE+ budget of 370 Watts, which provides layer 2 access switching and is ideal for deploying to branch locations. With stacking capabilities and 10G SFP+ uplinks, performance is guaranteed. This family also supports an optional, rack-mountable remote PSU (Cisco RPS-2300) for power redundancy requirements

Cisco Meraki switches are built from the ground up to be easy to manage without compromising any of the power and flexibility traditionally found in enterprise-class switches.

The Meraki MS is managed through an elegant, intuitive cloud interface, rather than a cryptic command line. To bring up a Meraki switch, just plug it in; there’s no need for complicated configuration files, or even direct physical access to the switch.

Meraki’s centralised management gives administrators deep visibility into the network and how it’s used. See which switches are near capacity across hundreds of sites. Find all configuration changes made by a certain person with instant search.



Industry Leading Cloud Management

Cloud management has a number of benefits that make it easier to build networks large and small:

True zero-touch device provisioning
Virtual stacking: manage up to thousands of ports from a single pane of glass.
Application layer visibility with automatic operating system, client, and hostname fingerprinting.
Powerful Live Tools such as packet capture and cable test to isolate and troubleshoot network issues.
Alerts upon power loss, downtime, or configuration changes.
Role-based administration and automatic, scheduled firmware upgrades over the web.
Regular feature updates and enhancements delivered on demand from the Meraki cloud.
Features:

48 Port Gigabit Access switching
4 x 10G SFP+ uplink interface
Built-in dual stacking interfaces with up to 80G bandwidth
Non-blocking switch backplane with up to 176 Gbps bandwidth support
8 dedicated QoS queues for converged voice, video, and data applications
Up to 370 watt PoE budget with PoE+ support and dynamic power allocation for powering APs, phones, cameras, and other PoE-enabled devices
Low power consumption, quiet acoustic design, and shallow rack depth options, enabling flexible deployment in wiring closets as well as offices and classrooms
Integrated mounting brackets for rack and desk mounting
Lifetime hardware warranty and advanced replacement at no additional cost








Centrally Managed from the Cloud The Cisco Meraki Cloud Networking architecture enables plug and play branch deployments and provides centralised visibility and control across any number of distributed locations.

The Cisco Meraki MS is the industry’s first cloud managed switch, combining the benefits of cloud-based centralised management with a powerful, reliable access platform.

With cloud management, thousands of switch ports can be configured and monitored instantly, over the web. Provision remote sites without on-site IT, deploy network-wide configuration changes, and easily manage campus and distributed networks without training or dedicated staff.



Virtual Stacking Meraki MS Switches feature virtual stacking — an industry first — that allows management of thousands of switch ports as one, without requiring a physical connection between switches.

Quickly find and configure switch ports across your entire network, even those in geographically-distributed locations. Easily configure ports for access devices, assign voice VLANs, control PoE, and more, with a few simple clicks and without complex CLI instructions.

Virtual stacking is built-in to all Meraki MS Switches, with no need for extension modules, proprietary cables, or extra configuration. Simply log in to the Cisco Meraki dashboard and manage the entire access switch infrastructure without concern for their interconnectivity.



Layer 7 Application and Client Visibility Meraki MS Switches are the industry's only switches featuring integrated Layer 7 application and client fingerprinting and analysis. Hundreds of applications are automatically identified and reported, from business apps to BitTorrent and YouTube, so administrators can see where resources are spent.

Device fingerprinting with Google-like search allows administrators to easily find and identify individual users, iPads, Androids, and other devices. Search for devices across the entire network right from the Meraki dashboard, no matter which switch a device connects to.



Layer 3 Scalability & Failover Quickly scale growing networks while ensuring redundancy for critical switch infrastructure with Meraki layer 3 switches. Intuitive, dynamic routing configurable in the dashboard simplifies management by removing complex command line interfaces. Traffic flow is optimised at line rate without sacrificing deep visibility into client devices and application use. Deploy ACLs directly on MS switches to secure boundaries between VLANs, hosts, services, and the Internet.

In addition to dynamic routing, layer 3 Meraki MS switches support VRRP for warm spare failover, ensuring immediate recovery of gateway responsibilities—avoiding downtime and client disruption.




QoS for Voice and Video Deploy latency-sensitive applications such as voice and video by guaranteeing network performance. Voice and QoS features such as per-VLAN and protocol-based prioritisation, as well as flexible QoS assignments, give intuitive, granular control.

Intelligent use of LLDP on the network makes deploying devices such as VoIP phones painless. Simply select a VLAN for voice in the dashboard, and selected ports will accept tagged traffic on the voice VLAN. The port also uses LLDP advertisements to recommend devices use that VLAN for voice traffic.



Network Topology Meraki MS Switches include dynamic network topology that automatically maps network architectures, showing how Meraki security, switching, and wireless devices are connected.

Quickly see the status of the devices in your network, find specific devices by name or tags, see how many clients traverse links, and see where traffic flows over the network.

Built-in network topology requires no additional hardware or software.



Remote Live Tools and Alerts MS Switches make powerful live tools available for remote troubleshooting at any time. From infrastructure uptime and performance testing to device troubleshooting, live tools simplify day-to-day network administration and dramatically shorten time to resolution.

Built-in Ethernet cable testing no longer requires an excursion to one or more switch closets just to verify cable integrity. Simply select a switch port, run a cable test, and see results right in the dashboard, even if there is no device connected on the other end.

Each Meraki MS is automatically monitored 24×7 via the cloud. Email and text message alerts are configurable to immediately notify administrators of configuration changes, switch downtime, and even per-port disconnection events



Enterprise Security Extending security down to the port level has never been easier. MS Switches integrate seamlessly with enterprise-grade security systems using 802.1X. Define access policies, segregate guest devices, and quarantine entire environments right from the dashboard.

Applying policies on many ports takes just a few clicks — even if the ports are spread across many switches. Simply search to find the ports of interest, click to apply the desired policies, and save your changes. Policies are pushed immediately to the desired ports.

Seamless firmware updates, two factor authentication, and other built-in protections make secure, PCI and HIPAA-compliant networks easy and cost effective

As per Cisco's UK policy we are unable to ship any Cisco products to any address other than a company registered address as shown on Companies House.

Cloud Managed Stackable Access Switch

The Cisco Meraki MS225-48FP is a 48 port PoE+ switch with a PoE+ budget of 740 Watts, which provides layer 2 access switching and is ideal for deploying to branch locations. With stacking capabilities and 10G SFP+ uplinks, performance is guaranteed. This family also supports an optional, rack-mountable remote PSU (Cisco RPS-2300) for power redundancy requirements

Cisco Meraki switches are built from the ground up to be easy to manage without compromising any of the power and flexibility traditionally found in enterprise-class switches.

The Meraki MS is managed through an elegant, intuitive cloud interface, rather than a cryptic command line. To bring up a Meraki switch, just plug it in; there’s no need for complicated configuration files, or even direct physical access to the switch.

Meraki’s centralised management gives administrators deep visibility into the network and how it’s used. See which switches are near capacity across hundreds of sites. Find all configuration changes made by a certain person with instant search.



Industry Leading Cloud Management

Cloud management has a number of benefits that make it easier to build networks large and small:

True zero-touch device provisioning
Virtual stacking: manage up to thousands of ports from a single pane of glass.
Application layer visibility with automatic operating system, client, and hostname fingerprinting.
Powerful Live Tools such as packet capture and cable test to isolate and troubleshoot network issues.
Alerts upon power loss, downtime, or configuration changes.
Role-based administration and automatic, scheduled firmware upgrades over the web.
Regular feature updates and enhancements delivered on demand from the Meraki cloud.
Features:

48 Port Gigabit Access switching
4 x 10G SFP+ uplink interface
Built-in dual stacking interfaces with up to 80G bandwidth
Non-blocking switch backplane with up to 176 Gbps bandwidth support
8 dedicated QoS queues for converged voice, video, and data applications
Up to 740 watt PoE budget with PoE+ support and dynamic power allocation for powering APs, phones, cameras, and other PoE-enabled devices
Low power consumption, quiet acoustic design, and shallow rack depth options, enabling flexible deployment in wiring closets as well as offices and classrooms
Integrated mounting brackets for rack and desk mounting
Lifetime hardware warranty and advanced replacement at no additional cost








Centrally Managed from the Cloud The Cisco Meraki Cloud Networking architecture enables plug and play branch deployments and provides centralised visibility and control across any number of distributed locations.

The Cisco Meraki MS is the industry’s first cloud managed switch, combining the benefits of cloud-based centralised management with a powerful, reliable access platform.

With cloud management, thousands of switch ports can be configured and monitored instantly, over the web. Provision remote sites without on-site IT, deploy network-wide configuration changes, and easily manage campus and distributed networks without training or dedicated staff.



Virtual Stacking Meraki MS Switches feature virtual stacking — an industry first — that allows management of thousands of switch ports as one, without requiring a physical connection between switches.

Quickly find and configure switch ports across your entire network, even those in geographically-distributed locations. Easily configure ports for access devices, assign voice VLANs, control PoE, and more, with a few simple clicks and without complex CLI instructions.

Virtual stacking is built-in to all Meraki MS Switches, with no need for extension modules, proprietary cables, or extra configuration. Simply log in to the Cisco Meraki dashboard and manage the entire access switch infrastructure without concern for their interconnectivity.



Layer 7 Application and Client Visibility Meraki MS Switches are the industry's only switches featuring integrated Layer 7 application and client fingerprinting and analysis. Hundreds of applications are automatically identified and reported, from business apps to BitTorrent and YouTube, so administrators can see where resources are spent.

Device fingerprinting with Google-like search allows administrators to easily find and identify individual users, iPads, Androids, and other devices. Search for devices across the entire network right from the Meraki dashboard, no matter which switch a device connects to.



Layer 3 Scalability & Failover Quickly scale growing networks while ensuring redundancy for critical switch infrastructure with Meraki layer 3 switches. Intuitive, dynamic routing configurable in the dashboard simplifies management by removing complex command line interfaces. Traffic flow is optimised at line rate without sacrificing deep visibility into client devices and application use. Deploy ACLs directly on MS switches to secure boundaries between VLANs, hosts, services, and the Internet.

In addition to dynamic routing, layer 3 Meraki MS switches support VRRP for warm spare failover, ensuring immediate recovery of gateway responsibilities—avoiding downtime and client disruption.




QoS for Voice and Video Deploy latency-sensitive applications such as voice and video by guaranteeing network performance. Voice and QoS features such as per-VLAN and protocol-based prioritisation, as well as flexible QoS assignments, give intuitive, granular control.

Intelligent use of LLDP on the network makes deploying devices such as VoIP phones painless. Simply select a VLAN for voice in the dashboard, and selected ports will accept tagged traffic on the voice VLAN. The port also uses LLDP advertisements to recommend devices use that VLAN for voice traffic.



Network Topology Meraki MS Switches include dynamic network topology that automatically maps network architectures, showing how Meraki security, switching, and wireless devices are connected.

Quickly see the status of the devices in your network, find specific devices by name or tags, see how many clients traverse links, and see where traffic flows over the network.

Built-in network topology requires no additional hardware or software.



Remote Live Tools and Alerts MS Switches make powerful live tools available for remote troubleshooting at any time. From infrastructure uptime and performance testing to device troubleshooting, live tools simplify day-to-day network administration and dramatically shorten time to resolution.

Built-in Ethernet cable testing no longer requires an excursion to one or more switch closets just to verify cable integrity. Simply select a switch port, run a cable test, and see results right in the dashboard, even if there is no device connected on the other end.

Each Meraki MS is automatically monitored 24×7 via the cloud. Email and text message alerts are configurable to immediately notify administrators of configuration changes, switch downtime, and even per-port disconnection events



Enterprise Security Extending security down to the port level has never been easier. MS Switches integrate seamlessly with enterprise-grade security systems using 802.1X. Define access policies, segregate guest devices, and quarantine entire environments right from the dashboard.

Applying policies on many ports takes just a few clicks — even if the ports are spread across many switches. Simply search to find the ports of interest, click to apply the desired policies, and save your changes. Policies are pushed immediately to the desired ports.

Seamless firmware updates, two factor authentication, and other built-in protections make secure, PCI and HIPAA-compliant networks easy and cost effective

As per Cisco's UK policy we are unable to ship any Cisco products to any address other than a company registered address as shown on Companies House.

The Cisco Meraki C9300-24U-M is a high-efficiency 24-port UPoE switch designed to support dense network environments with demanding power and performance needs. Backed by Cisco’s cloud-managed Meraki dashboard, it delivers seamless provisioning, consistent monitoring, and a streamlined approach to switch management for scaling access layers without physical complexity.

Key Features 24 x 1GbE RJ-45 UPoE ports for high-powered device connectivity
480Gbps stacking bandwidth with support for up to 8 stackable units
Modular uplink flexibility with 40G, 10G, and 1G SFP/SFP+ options
830W PoE budget with single PSU, expandable up to 1440W with second PSU
Cloud-based Meraki Dashboard for centralized switch configuration and monitoring
Advanced security via adaptive policy and VLAN segmentation
Hot-swappable dual power supply support with redundant fan architecture
Switching capacity rated at 208Gbps with forwarding rate of ~154.76 Mpps
The Catalyst 9300-M addresses the most demanding enterprise applications by combining the simplicity of the Meraki dashboard with powerful switching hardware. To satisfy high-bandwidth applications and the deployment of high-speed wifi access points, the Catalyst 9300-M provides multigigabit ports, 480G stacking, and modular 10/25/40G uplinks.

The Catalyst 9300-M delivers resiliency with fast stack convergence and StackPower. The Catalyst 9300-M provides Adaptive Policy using an over-the-wire tag which segments traffic into security groups to deliver scalable security. The Catalyst 9300-M is integrated under the Meraki dashboard to provide a simply powerful solution to the most demanding wired access applications.

Adaptive Policy provides simple & scalable security policies to segment traffic using Security Groups. Security Groups are created in the dashboard using natural language such as “IOT device” & “Guest.” The security policy intent (e.g., Permit or Deny) is then simply provisioned between Security Groups which results in the segmentation of each group's traffic. By making security policy management intuitive and scalable relative to legacy IP-address based Access Control Lists, Adaptive Policy empowers operators to confidently secure their network traffic independent of future network changes.

Purpose-Built Access Engineered for high-density deployments, the C9300-24U-M supports next-gen devices including wireless access points, IP surveillance, and VoIP terminals that demand consistent power and bandwidth at the edge. With UPoE across all ports, the switch easily supports endpoints beyond standard PoE requirements.

Modular Uplink & Scalability The C9300-24U-M features modular uplink support allowing IT teams to select 1G, 10G, or 40G SFP-based uplinks, aligning port speed and bandwidth with current infrastructure or future growth. Physical stacking of up to eight units ensures expanded port capacity without altering logical configurations.

Reliable Power Architecture This model includes an 1100W AC power supply and can be upgraded with a second PSU for additional redundancy. Designed with long-life hardware and redundant fans, the system is built for continuous uptime even in high-demand roles.

Cloud-Native Management Through the Meraki dashboard, the C9300-24U-M offers zero-touch deployment, remote troubleshooting, real-time alerts, and integrated network visibility, all from a browser interface. This simplifies fleet-wide updates and enforces policy from one unified control plane.

Note

All current Cisco Meraki products require valid licensing to operate. Having licenses allows your organisation’s cloud-based online Dashboard, hosted by Meraki, to connect to and configure & manage all your Meraki devices. All devices are controlled under a single pane of glass in the dashboard.

*Product may differ in appearance; Images used are for illustrative purposes only

As per Cisco's UK policy we are unable to ship any Cisco products to any address other than a company registered address as shown on Companies House.

The Cisco Catalyst C9300X-24HX-M is built for networks that demand high-speed access, extensive PoE capabilities, and cloud-based management flexibility. With full Meraki integration, this switch supports multi-gigabit throughput, secure device segmentation, and intelligent power distribution across 24 UPoE+ ports. It's made for scaling high-density wireless, IoT, and smart building applications with ease and consistency.

Key Features 24 multi-gigabit (100M/1/2.5/5/10G) UPoE+ RJ-45 ports
Up to 90W per port with 735W total PoE budget (expandable)
Modular uplink options: 10G, 25G, 40G, or 100G
StackWise-1T support for up to 1Tbps stacking bandwidth
Line-rate MACsec and hardware-accelerated IPsec up to 100Gbps
Fully managed through the Meraki dashboard for centralized control
Modular power supplies and StackPower support for redundancy
Integrated telemetry and programmability through IOS XE
The Catalyst 9300X-M addresses the most demanding enterprise applications by combining the simplicity of the Meraki dashboard with powerful switching hardware. To satisfy high-bandwidth applications and the deployment of high-speed wifi access points, the Catalyst 9300X-M provides multigigabit ports, 1TB stacking, and modular 10/25 or 40/100G uplinks.

The Catalyst 9300X-M delivers resiliency with fast stack convergence and StackPower. The Catalyst 9300X-M provides Adaptive Policy using an over-the-wire tag which segments traffic into security groups to deliver scalable security. The Catalyst 9300X-M is integrated under the Meraki dashboard to provide a simply powerful solution to the most demanding wired access applications.

Adaptive Policy provides simple & scalable security policies to segment traffic using Security Groups. Security Groups are created in the dashboard using natural language such as “IOT device” & “Guest.” The security policy intent (e.g., Permit or Deny) is then simply provisioned between Security Groups which results in the segmentation of each group' s traffic. By making security policy management intuitive and scalable relative to legacy IP-address based Access Control Lists, Adaptive Policy empowers operators to confidently secure their network traffic independent of future network changes.

Modular Speed and Scale This model includes flexible uplink slots that support a wide range of speeds and modules, ideal for environments transitioning to higher throughput without hardware overhauls.

High-Power Access The switch supports up to 90W per port to power demanding devices like wireless access points, cameras, or building automation units, all while providing stable delivery from a scalable PoE budget.

Meraki Dashboard Integration Manage port configurations, monitor live traffic, apply group policies, and schedule firmware updates from anywhere, all within the intuitive Meraki cloud dashboard.

Built for Secure Environments Hardware-based encryption enables trusted device onboarding and traffic protection without impacting throughput. Trustworthy design principles and secure boot architecture come standard.

Note

All current Cisco Meraki products require valid licensing to operate. Having licenses allows your organisation’s cloud-based online Dashboard, hosted by Meraki, to connect to and configure & manage all your Meraki devices. All devices are controlled under a single pane of glass in the dashboard.

As per Cisco's UK policy we are unable to ship any Cisco products to any address other than a company registered address as shown on Companies House.

The Cisco Catalyst C9300X-48HX-M is built to support high-performance connectivity demands across modern access environments. With 48 multigigabit UPoE+ ports and modular uplink flexibility, it delivers high-density power and data capacity for dynamic networks. It stands out for supporting full 90W UPoE+ across numerous ports while enabling efficient stacking, high throughput, and adaptable power provisioning—all under a cloud or hybrid management architecture.

Key Features 48 multigigabit (100M/1G/2.5G/5G/10G) RJ-45 ports with full UPoE+ support
Modular uplink slot supporting 10/25/40/100G via SFP+/SFP28/QSFP+/QSFP28
Up to 100 Gbps IPsec throughput with hardware offload
1 Tbps StackWise-1T stacking bandwidth
Up to 1,690W PoE budget with dual power supplies
Dual management options via Meraki Dashboard or local CLI/API access
Field-replaceable fans and power supplies for better longevity
The Catalyst 9300X-M addresses the most demanding enterprise applications by combining the simplicity of the Meraki dashboard with powerful switching hardware. To satisfy high-bandwidth applications and the deployment of high-speed wifi access points, the Catalyst 9300X-M provides multigigabit ports, 1TB stacking, and modular 10/25 or 40/100G uplinks.

The Catalyst 9300X-M delivers resiliency with fast stack convergence and StackPower. The Catalyst 9300X-M provides Adaptive Policy using an over-the-wire tag which segments traffic into security groups to deliver scalable security. The Catalyst 9300X-M is integrated under the Meraki dashboard to provide a simply powerful solution to the most demanding wired access applications.

Adaptive Policy provides simple & scalable security policies to segment traffic using Security Groups. Security Groups are created in the dashboard using natural language such as “IOT device” & “Guest.” The security policy intent (e.g., Permit or Deny) is then simply provisioned between Security Groups which results in the segmentation of each group's traffic. By making security policy management intuitive and scalable relative to legacy IP-address based Access Control Lists, Adaptive Policy empowers operators to confidently secure their network traffic independent of future network changes.

Scalable Access and Performance This switch supports multigigabit Ethernet on every port, enabling faster device access without changing existing cabling. It's particularly suited for next-generation access layers needing greater speed and power for connected devices.

Flexible Power Options Delivering up to 90W per port and supporting StackPower configurations, it simplifies power distribution across multiple units. This flexibility supports growing PoE demands, including wireless access points, lighting systems, and building automation devices.

Advanced Visibility and Segmentation Security policies can be deployed and managed at scale through Meraki or traditional methods, making it easy to apply segmentation and access control across user and device groups with minimal configuration overhead.

Built for Longevity The C9300X-48HX-M combines modularity with physical resilience. With a 2Tbps backplane, stackable architecture, and modular uplinks, it is designed to support future upgrades and evolving infrastructure needs without complete replacements.

Note

All current Cisco Meraki products require valid licensing to operate. Having licenses allows your organisation’s cloud-based online Dashboard, hosted by Meraki, to connect to and configure & manage all your Meraki devices. All devices are controlled under a single pane of glass in the dashboard.

*Product may differ in appearance; Images used are for illustrative purposes only

As per Cisco's UK policy we are unable to ship any Cisco products to any address other than a company registered address as shown on Companies House.