APC UPS Mounting Accessories

APC Easy UPS On-Line SRV 19" Rail Kit 700mm Depth

High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions.

These rail kits are ideal for mounting rack Easy UPS in a rack. These rail kits can support equipment measuring up to 16.75" (43cm) to 17.7" (45cm) wide.

Installation: 1. Insert 4 pieces of fixing nuts into the following locations of rail sliders. Be sure fix them firmly. Then, pull apart two ends of rail sliders and place them in a chassis. Be sure the pulling distance meets the depth of rack chassis and place fixing studs to the corresponding holes on supporting columns. For example, if depth of rack chassis is 700mm, please pull the length of rail sliders is 700mm.

2. Use 4 pieces of M6 screws to mount rail sliders into chassis.

3. According to UPS height, put 6 pieces of nuts on proper location.

4. Put UPS with assembled ears on the rail support.

5. Fix the UPS in position with 4 screws.

6. Assembly is complete.

  Additional information can be found in the User Guide PDF file

APC Easy UPS On-Line SRV 19" Rail Kit 900mm Depth

High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions.

These rail kits are ideal for mounting rack Easy UPS in a rack. These rail kits can support equipment measuring up to 16.75" (43cm) to 17.7" (45cm) wide. SRVRK1 can support equipment with a maximum weight of 60kg and SRVRK2 can support up to 100kg.

Installation: 1. Use 4 screws to mount right and left rail sliders in front.

2. Use 4 screws to mount rail sliders in back.

3. According to UPS height, put nuts on proper location

4. Put UPS on the rail support and fix the UPS in position with screws.

5. Assembly is complete.

  Additional information can be found in the User Guide PDF file

The APC M6 Hardware Kit is the ultimate solution for securely mounting your equipment within enclosures featuring square hole mounting rails. Designed with precision and reliability in mind, this comprehensive kit includes 32 high-quality M6 cage nuts, nylon washers, and slot/phillips screws, ensuring a seamless installation process for your valuable hardware.

APC Smart-UPS RT 19" Rail Kit for UPS 5/6/8/10/15/20kVA

APC Smart-UPS RT 19” Rail Kit For 5-20kVA


SRTGRK1 is compatible with: • SRTG5KXLI

• SRTG5KXLT

• SRTG6KXLI

• SRTG8KXLI

• SRTG10KXLI

• Power module of SRTG15KXLI

• Power module of SRTG20KXLI

• SRTG192XLBP3

• SRTG192XLBP4

Package Contents:   Additional information can be found in the Brochure PDF file

Installation information can be found in the User Guide PDF file

Includes : Installation Guide , Mounting hardware , Rack Mounting Brackets , Screws
Physical Maximum Height: 44mm , 4.4cm
Maximum Width: 527mm , 52.7cm
Maximum Depth: 89mm , 8.9cm
Net Weight: 2.73kg
Shipping weight: 3.18kg
Shipping Height: 70mm , 7.0cm
Shipping Width: 695mm , 69.5cm
Shipping Depth: 114mm , 11.4cm
Color: Grey
These rails must be purchased if you wish to rackmount the following APC UPS

SMX750I

SMX1000I

APC Smart-UPS RT 19" Rail Kit for XLBP

APC SMART-UPS RT 19" Rail Kit For External Battery Pack 15/20kVA


SRTGRK1 is compatible with: • SRTG192XLBP2

Package Contents:   Additional information can be found in the Brochure PDF file

Installation information can be found in the User Guide PDF file

APC Smart-UPS RT 19" Rail Kit for Smart-UPS RT 15/20kVA

Accessory solutions to tailor the Smart-UPS to meet your specific needs.

Installation:   Additional information can be found in the User Guide PDF file

Includes : Installation guide , Mounting hardware , Rack Mounting brackets

Easily Installed - The existing PSU & FanTray can be removed and the replacement Booster Kit installed in minutes and using only a screw driver and a pair of clippers or scissors.

APC SmartUPS/SmartUPS RT 2 Post Rail Kits

Accessory solutions to tailor the Smart-UPS to meet your specific needs.

Includes: Installation guide, Mounting hardware, Rack mounting brackets


Installation:  

Includes : Installation guide , Mounting hardware , Rack Mounting brackets

Quick installation - The iBusway for Data Center solution uses bolted snap-fit hangers and plug-in joint connections, which simplify installation and eliminate the need for expensive special tools.

Includes : Installation Guide , Mounting hardware , Rack Mounting Brackets , Screws

This rail kit is designed for Smart-UPS RT3000VA/5000VA/7500VA/10000VA, SURT192XLBP, SURT Transformers SURT001/SURT002/SURT003/SURT004.

Includes : Installation Guide , Mounting hardware , Rack Mounting Brackets , Screws

Includes : Installation guide , Mounting hardware
Quick installation - The iBusway for Data Center solution uses bolted snap-fit hangers and plug-in joint connections, which simplify installation and eliminate the need for expensive special tools.

APC Smart-UPS SRTG Parallel Kit for UPS 15/20kVA


Features:   Additional information can be found in the User Guide PDF file

Accessory solutions to tailor the Smart-UPS to meet your specific needs.

Specifications

Main

Provided equipment: Installation guide, Mounting hardware
Physical

Colour: Grey
Height: 4.4 cm
Width: 52.7 cm
Depth: 8.9 cm
Net weight: 2.73 kg
Mounting mode: Rack-mounted
Environmental

ambient air temperature for operation: -76…140 °C
Operating altitude: 0-10000 ft
Relative humidity: 0…95 % non-condensing
Ambient air temperature for storage: -76…140 °C
Storage altitude: 0.00…3048.00 m
Storage Relative Humidity: 0…95 % non-condensing
Packing Units

Unit Type of Package 1: PCE
Number of Units in Package 1: 1
Package 1 Height: 7.1 cm
Package 1 Width: 14.2 cm
Package 1 Length: 69.6 cm
Package 1 Weight: 3.64 kg
Warranty

Warranty Term: 2 years repair or replace