APC Easy UPS

APC EASY UPS BV 650VA, AVR, IEC Outlet, 230V

Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments.

Includes: User manual


APC Easy UPS Single Phase BV Series Standard Features Flexible design for both high and low powered devices
Capable of powering low power devices such as your modem, router, or VOIP as well as high power devices such as PCs, and gaming consoles.

2-Year warranty and always on customer service
Customer service is always there when you need it via phone support, online forums, and live chats with APC support agents.

  Automatic Voltage Regulation (AVR)
Corrects voltage dips and surges to safe levels which is especially important for regions with poor power. This also saves battery life by correcting sustained voltage fluctuations without losing battery power.

Stay connected for hours, not minutes
Power your home router and/or modem allowing you to maintain your internet connection after safely shutting down your PC or other high power devices.

  Reliable surge protection
Protects your valuable electronic devices against damaging lightning, surges and spikes.

Wall mounting sockets
Keyhole sockets for mounting the UPS in structured wiring closets, behind desks, in basements, and garages

Wide outlet spacing
Allows you to connect bulky transformers without blocking other outlets.

Cold start function
Allows you to reboot the UPS even when there is no utility power available

Compact size
Accommodates installation in a variety of environments

Easy to use
One step battery connector

Intelligent off-mode charging
Continues to charge the battery even when the UPS is off

Cold start function
Allows you to reboot the UPS even when there is no utility power available

  Features: A. ON/OFF button with indicator

B. Input power cord

C. Battery backup and surge protected outlets

D. Battery connector

E. Circuit breaker

F. AC power inlet with AC fuse

 
Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

 
Wall-mount holes Allow flexibility for setup in tight locations and mounting on wall or other surfaces.

 
Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.

 
Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance.

 
Advanced Safety Features Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.

 
Battery backup and surge protection Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.

 
Battery and surge protected outlets Back up and protect your hardware and data during power outages, surges and spikes.

 
Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

 
Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles.

 
Boost Automatic Voltage Regulation (AVR) Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

 
Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.

 
Cold-start capable Provides temporary battery power when the utility power is out.

 
LED Indicators Provide easy-to-read status of the unit and utility power conditions.

 
Audible alarms Provides notification of changing utility power and UPS power conditions

 

Additional information can be found in the Brochure PDF file

Installation information can be found in the User Guide PDF file

Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments.


Specification Output power capacity 360 Watts / 700VA Output Connections (4) IEC 320 C13 (Battery Backup) Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections IEC 60320 C14 Cord Length 1.2 Metres Key Features Access monitoring Detect access by unauthorized personnel via door switch. Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Manageability LED Indicators Provide easy-to-read status of the unit and utility power conditions. Audible alarms Provides notification of changing utility power and UPS power conditions Protection Battery and surge protected outlets Back up and protect your hardware and data during power outages, surges and spikes. Battery backup and surge protection Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. Safety Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Features Cold-start capable Provides temporary battery power when the utility power is out. Boost Automatic Voltage Regulation (AVR) Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery. Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles. Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor. Availability Advanced Safety Features Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance

APC EASY UPS BV 500VA, AVR, IEC Outlet, 230V

Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments.

Includes: User manual


APC Easy UPS Single Phase BV Series Standard Features Flexible design for both high and low powered devices
Capable of powering low power devices such as your modem, router, or VOIP as well as high power devices such as PCs, and gaming consoles.

2-Year warranty and always on customer service
Customer service is always there when you need it via phone support, online forums, and live chats with APC support agents.

  Automatic Voltage Regulation (AVR)
Corrects voltage dips and surges to safe levels which is especially important for regions with poor power. This also saves battery life by correcting sustained voltage fluctuations without losing battery power.

Stay connected for hours, not minutes
Power your home router and/or modem allowing you to maintain your internet connection after safely shutting down your PC or other high power devices.

  Reliable surge protection
Protects your valuable electronic devices against damaging lightning, surges and spikes.

Wall mounting sockets
Keyhole sockets for mounting the UPS in structured wiring closets, behind desks, in basements, and garages

Wide outlet spacing
Allows you to connect bulky transformers without blocking other outlets.

Cold start function
Allows you to reboot the UPS even when there is no utility power available

Compact size
Accommodates installation in a variety of environments

Easy to use
One step battery connector

Intelligent off-mode charging
Continues to charge the battery even when the UPS is off

Cold start function
Allows you to reboot the UPS even when there is no utility power available

  Features: A. ON/OFF button with indicator

B. Input power cord

C. Battery backup and surge protected outlets

D. Battery connector

E. Circuit breaker

F. AC power inlet with AC fuse

 
Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

 
Wall-mount holes Allow flexibility for setup in tight locations and mounting on wall or other surfaces.

 
Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.

 
Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance.

 
Advanced Safety Features Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.

 
Battery backup and surge protection Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.

 
Battery and surge protected outlets Back up and protect your hardware and data during power outages, surges and spikes.

 
Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

 
Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles.

 
Boost Automatic Voltage Regulation (AVR) Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

 
Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.

 
Cold-start capable Provides temporary battery power when the utility power is out.

 
LED Indicators Provide easy-to-read status of the unit and utility power conditions.

 
Audible alarms Provides notification of changing utility power and UPS power conditions

 

Additional information can be found in the Brochure PDF file

Installation information can be found in the User Guide PDF file

APC EASY UPS BV 800VA, AVR, IEC Outlet, 230V

Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments.

Includes: User manual


APC Easy UPS Single Phase BV Series Standard Features Flexible design for both high and low powered devices
Capable of powering low power devices such as your modem, router, or VOIP as well as high power devices such as PCs, and gaming consoles.

2-Year warranty and always on customer service
Customer service is always there when you need it via phone support, online forums, and live chats with APC support agents.

  Automatic Voltage Regulation (AVR)
Corrects voltage dips and surges to safe levels which is especially important for regions with poor power. This also saves battery life by correcting sustained voltage fluctuations without losing battery power.

Stay connected for hours, not minutes
Power your home router and/or modem allowing you to maintain your internet connection after safely shutting down your PC or other high power devices.

  Reliable surge protection
Protects your valuable electronic devices against damaging lightning, surges and spikes.

Wall mounting sockets
Keyhole sockets for mounting the UPS in structured wiring closets, behind desks, in basements, and garages

Wide outlet spacing
Allows you to connect bulky transformers without blocking other outlets.

Cold start function
Allows you to reboot the UPS even when there is no utility power available

Compact size
Accommodates installation in a variety of environments

Easy to use
One step battery connector

Intelligent off-mode charging
Continues to charge the battery even when the UPS is off

Cold start function
Allows you to reboot the UPS even when there is no utility power available

  Features: A. ON/OFF button with indicator

B. Input power cord

C. Battery backup and surge protected outlets

D. Battery connector

E. Circuit breaker

F. AC power inlet with AC fuse

 
Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

 
Wall-mount holes Allow flexibility for setup in tight locations and mounting on wall or other surfaces.

 
Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.

 
Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance.

 
Advanced Safety Features Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.

 
Battery backup and surge protection Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.

 
Battery and surge protected outlets Back up and protect your hardware and data during power outages, surges and spikes.

 
Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

 
Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles.

 
Boost Automatic Voltage Regulation (AVR) Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

 
Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.

 
Cold-start capable Provides temporary battery power when the utility power is out.

 
LED Indicators Provide easy-to-read status of the unit and utility power conditions.

 
Audible alarms Provides notification of changing utility power and UPS power conditions

 
Additional information can be found in the Brochure PDF file

Installation information can be found in the User Guide PDF file

Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments.


Specification Output power capacity 480 Watts / 900VA Output Connections (4) IEC 320 C13 (Battery Backup) Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections IEC 60320 C14 Cord Length 1.2 Metres Key Features Access monitoring Detect access by unauthorized personnel via door switch. Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Manageability LED Indicators Provide easy-to-read status of the unit and utility power conditions. Audible alarms Provides notification of changing utility power and UPS power conditions Protection Battery and surge protected outlets Back up and protect your hardware and data during power outages, surges and spikes. Battery backup and surge protection Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. Safety Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Features Cold-start capable Provides temporary battery power when the utility power is out. Boost Automatic Voltage Regulation (AVR) Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery. Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles. Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor. Availability Advanced Safety Features Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance

APC EASY UPS BV 1000VA, AVR, IEC Outlet, 230V

Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments.

Includes: User manual


APC Easy UPS Single Phase BV Series Standard Features Flexible design for both high and low powered devices
Capable of powering low power devices such as your modem, router, or VOIP as well as high power devices such as PCs, and gaming consoles.

2-Year warranty and always on customer service
Customer service is always there when you need it via phone support, online forums, and live chats with APC support agents.

  Automatic Voltage Regulation (AVR)
Corrects voltage dips and surges to safe levels which is especially important for regions with poor power. This also saves battery life by correcting sustained voltage fluctuations without losing battery power.

Stay connected for hours, not minutes
Power your home router and/or modem allowing you to maintain your internet connection after safely shutting down your PC or other high power devices.

  Reliable surge protection
Protects your valuable electronic devices against damaging lightning, surges and spikes.

Wall mounting sockets
Keyhole sockets for mounting the UPS in structured wiring closets, behind desks, in basements, and garages

Wide outlet spacing
Allows you to connect bulky transformers without blocking other outlets.

Cold start function
Allows you to reboot the UPS even when there is no utility power available

Compact size
Accommodates installation in a variety of environments

Easy to use
One step battery connector

Intelligent off-mode charging
Continues to charge the battery even when the UPS is off

Cold start function
Allows you to reboot the UPS even when there is no utility power available

  Features: A. ON/OFF button with indicator

B. Input power cord

C. Battery backup and surge protected outlets

D. Battery connector

E. Circuit breaker

F. AC power inlet with AC fuse

 
Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

 
Wall-mount holes Allow flexibility for setup in tight locations and mounting on wall or other surfaces.

 
Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.

 
Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance.

 
Advanced Safety Features Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.

 
Battery backup and surge protection Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.

 
Battery and surge protected outlets Back up and protect your hardware and data during power outages, surges and spikes.

 
Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

 
Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles.

 
Boost Automatic Voltage Regulation (AVR) Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

 
Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.

 
Cold-start capable Provides temporary battery power when the utility power is out.

 
LED Indicators Provide easy-to-read status of the unit and utility power conditions.

 
Audible alarms Provides notification of changing utility power and UPS power conditions

 
Additional information can be found in the Brochure PDF file

Installation information can be found in the User Guide PDF file

Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments.


Specification Output power capacity 650 Watts / 1.2kVA Output Connections (6) IEC 320 C13 (Battery Backup) Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections IEC 60320 C14 Cord Length 1.2 Metres Key Features Access monitoring Detect access by unauthorized personnel via door switch. Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Manageability LED Indicators Provide easy-to-read status of the unit and utility power conditions. Audible alarms Provides notification of changing utility power and UPS power conditions Protection Battery and surge protected outlets Back up and protect your hardware and data during power outages, surges and spikes. Battery backup and surge protection Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. Safety Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Features Cold-start capable Provides temporary battery power when the utility power is out. Boost Automatic Voltage Regulation (AVR) Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery. Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles. Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor. Availability Advanced Safety Features Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments.


Specification Output power capacity 900 Watts / 1.6kVA Output Connections (6) IEC 320 C13 (Battery Backup) Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections IEC 60320 C14 Cord Length 1.2 Metres Key Features Access monitoring Detect access by unauthorized personnel via door switch. Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Manageability LED Indicators Provide easy-to-read status of the unit and utility power conditions. Audible alarms Provides notification of changing utility power and UPS power conditions Protection Battery and surge protected outlets Back up and protect your hardware and data during power outages, surges and spikes. Battery backup and surge protection Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. Safety Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Features Cold-start capable Provides temporary battery power when the utility power is out. Boost Automatic Voltage Regulation (AVR) Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery. Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles. Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor. Availability Advanced Safety Features Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance

This APC Easy UPS provides power protection for unstable power conditions in homes and small offices, ensuring consistent and reliable connectivity at the most critical moments. The 2200VA tower UPS has 6 total outlets, 4 of which are battery back up and surge protection, and 2 that are surge protection only. It has a surge energy rating of 273 Joules. It features Automatic Voltage Regulation to correct voltage dips and surges to proper levels.

This UPS has a 2-year warranty and CE product certification. It is compatible with a dedicated user-replaceable battery, and the APC replacement battery cartridge helps restore UPS performance to the original specifications.

Product Features

Compact size acommodates installation in a variety of environments
AVR corrects voltage variations to provide reliable power
LED display provides easy-to-read status of unit and utility power conditions
Cold start function allows you to reboot the UPS even when utility power is unavailable
Restore power backup capacity with user-replaceable battery (APCRBC177 sold separately)
Specification Output power capacity 1.2kWatts / 2.2kVA Output Connections (6) IEC 320 C19 (Battery Backup) Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections IEC 60320 C20 Cord Length 1.2 Metres Key Features Access monitoring Detect access by unauthorized personnel via door switch. Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Manageability LED Indicators Provide easy-to-read status of the unit and utility power conditions. Audible alarms Provides notification of changing utility power and UPS power conditions Protection Battery and surge protected outlets Back up and protect your hardware and data during power outages, surges and spikes. Battery backup and surge protection Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. Safety Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Features Cold-start capable Provides temporary battery power when the utility power is out. Boost Automatic Voltage Regulation (AVR) Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery. Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles. Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor. Availability Advanced Safety Features Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Product Features Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments.

Includes: Documentation CD, USB cable, User manual

Product Features Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments.

Includes: Documentation CD, USB cable, User manual

Product Features Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments.

Includes: Documentation CD, USB cable, User manual

Product Features Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments.

Includes: Documentation CD, USB cable, User manual

APC Easy UPS Line-interactive SMV 3000VA 230V

Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments.

Includes: User manual


APC Easy UPS 1 Ph SMV Series Standard Features Power Factor
More real output power with 0.7 Pf

Battery Connector
A convenient way to disconnect the battery for transport

  Pure Sinewave
A pure form of sinewave designed to emulate utility power, will support your device upon battery backup

Generator Compatible
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

  LCD Display
Intuitive interface provides detailed and accurate information at a glance

Rugged Metal Construction
Easy UPS SMV is built with resilient sheet metal that rigidly holds and protects critical electrical components

Automatic Voltage Regulation
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

Generous Number of Outlets
6 battery backup and surge protected outlets are included across all SMV Easy UPS

  Dry contact port and intelligent slot
Provides dry contact signals for remote UPS monitoring. Intelligent Slot also available to add a management card (sold separately) to enable remote UPS monitoring

Safety Agency Approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment

 
Features: A. ON/OFF button with indicator

B. RS-232

C. USB port

D. Fan /ventilation hole

E. Battery connector

F. AC Inlet

G. Fuse

H. Battery backup outlets with surge protection

I. Output breaker

J. Intelligent Slot

K. Dry contact

 
Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

 
Cold-start capable Provides temporary battery power when the utility power is out.

 
Intelligent Card Slot Customize UPS capabilities with management cards.

 
LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms.

 
Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

 
Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.

 
Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance

 
Advanced Safety Features Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.

 
Battery backup and surge protection Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.

 
Battery and surge protected outlets Back up and protect your hardware and data during power outages, surges and spikes.

 
Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

 
Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles.

 
Boost Automatic Voltage Regulation (AVR) Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

 
Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.

 
Cold-start capable Provides temporary battery power when the utility power is out.

 
LED Indicators Provide easy-to-read status of the unit and utility power conditions.

 
Audible alarms Provides notification of changing utility power and UPS power conditions

 

Additional information can be found in the Brochure PDF file

Installation information can be found in the User Guide PDF file