TREND Networks NaviTek Range

The TREND Networks NaviTEK III Tester R166004 is a versatile copper and Wi-Fi network troubleshooter with fibre-ready capability, designed for IT teams, network technicians, systems integrators and managed service providers. Combining physical-layer diagnostics, Multi-Gig link detection, PoE validation and advanced network analysis, it helps identify connectivity issues across cabling, switches, IP configurations, VLANs, wireless infrastructure and connected devices. With integrated Wi-Fi diagnostics, a built-in Visual Fault Locator and support for optional SFP modules, the NaviTEK III provides a flexible solution for network installation, maintenance and fault-finding across modern IT environments.

Key Features of TREND Networks R166004 NaviTEK III Tester Live copper wiremap testing, TDR distance-to-fault, cable length measurement and selectable analogue or digital tone generation.
Multi-Gig link detection from 10Mb/s to 10Gb/s, including 2.5Gb/s and 5Gb/s Ethernet connections.
PoE Type 1–4 and Class 0–8 classification with selectable high or low load testing up to 90W and automatic Pass/Fail results.
Switch and port identification with LLDP, CDP and EDP information, including VLAN, advertised speeds, PoE data, switch name, IP address and MAC address.
Network diagnostics for DHCP, IP configuration, DNS, gateway and internet connectivity, plus Ping, TraceRoute and device discovery.
Built-in Wi-Fi 5 diagnostics on 2.4GHz and 5GHz, with support for compatible external Wi-Fi 5, Wi-Fi 6, Wi-Fi 6E and Wi-Fi 7 USB adapters.
Wireless analysis covering channel utilisation, access points, signal strength and data rate, with visual and audible access point location indicators.
Fibre-ready testing with an integrated Visual Fault Locator and support for optional 1Gb/s SFP modules for fibre length, live receive power and network diagnostics.
TREND AnyWARE Cloud integration for project transfer, result synchronisation and professional report generation over Wi-Fi or wired Ethernet.
TeamViewer and VNC remote support through the dedicated Gigabit Ethernet management port.
Supplied with a Wi-Fi antenna, RJ45 wiremap terminators, USB-C power supply, Cat 6A patch cord, VFL adapter and soft carry case.
Copper Cable and Physical Layer Diagnostics The NaviTEK III Tester provides essential tools for investigating copper Ethernet cabling faults and verifying physical-layer connectivity. Live wiremap testing helps identify wiring issues, while Time Domain Reflectometry (TDR) measures the distance to cable faults. Technicians can also measure cable length and use selectable analogue or digital tone generation to trace cables and locate connections. These functions support efficient troubleshooting during network installations, maintenance and fault investigation.

Multi-Gig Ethernet Link Detection Identify Ethernet link speeds from 10Mb/s to 10Gb/s, including 2.5Gb/s and 5Gb/s connections. This capability helps technicians verify switch and device port negotiation, investigate performance issues and confirm connectivity across networks using different Ethernet speeds. It is particularly useful when deploying Multi-Gig switches, wireless access points and other high-bandwidth network equipment.

Power over Ethernet Testing up to 90W Assess Power over Ethernet delivery with automatic identification of PoE Types 1–4 and Classes 0–8. Selectable high and low load testing up to 90W, together with automatic Pass/Fail results, helps technicians verify power delivery and investigate potential issues affecting connected equipment. This supports troubleshooting for compatible PoE-powered devices, including wireless access points, IP cameras and VoIP phones.

Switch Discovery and Port Identification The tester displays network information obtained through LLDP, CDP and EDP discovery protocols to help identify connected switches and ports. Available details include port number and name, VLAN information, advertised link speeds, PoE data, switch name, IP address and MAC address. This visibility helps technicians establish where a device is connected and investigate configuration or connectivity problems without relying solely on access to network management systems.

IP Configuration and Network Diagnostics Investigate network connectivity using tools for validating DHCP and IP configuration, DNS resolution, gateway access and internet connectivity. Ping, TraceRoute and device discovery provide additional insight into network communication and routing issues. These diagnostic functions help isolate faults involving addressing, network services, switches and connected devices across copper, fibre and Wi-Fi environments.

Advanced Wi-Fi Network Troubleshooting Built-in Wi-Fi 5 support enables wireless analysis across the 2.4GHz and 5GHz bands, with additional support for compatible external Wi-Fi 5, Wi-Fi 6, Wi-Fi 6E and Wi-Fi 7 USB adapters. Technicians can analyse channel utilisation, identify access points, assess signal strength and data rate, and locate access points using visual and audible indicators. These features help investigate wireless coverage, interference and performance issues in business and enterprise networks.

Fibre-Ready Testing and Visual Fault Location The NaviTEK III Tester includes an integrated Visual Fault Locator for checking fibre continuity and identifying potential breaks or bends. Optional compatible 1Gb/s SFP modules and fibre accessories extend its capabilities to fibre length measurement, live optical receive power monitoring, SFP information and active-network diagnostics. As SFP modules are not included, technicians can select compatible modules and accessories to suit their fibre infrastructure and testing requirements.

TREND AnyWARE Cloud Reporting TREND AnyWARE Cloud integration supports project downloads and uploads over Wi-Fi or wired Ethernet, test result synchronisation and professional report generation. These capabilities help technicians organise testing workflows, maintain consistent records and produce documentation for customers, installation projects and ongoing network maintenance.

Remote Support and Management TeamViewer and VNC remote control capabilities support technical assistance for field technicians working at customer sites or remote locations. The dedicated Gigabit Ethernet management port provides a connection for remote support workflows, helping IT teams collaborate during fault diagnosis and resolve network issues more efficiently.

Supplied Accessories and Equipment The NaviTEK III Tester R166004 includes the essential accessories for copper and Wi-Fi troubleshooting, with fibre testing available through compatible optional SFP modules and accessories.

NaviTEK III tester with copper and Wi-Fi testing capabilities
Fibre-ready capability with optional SFP modules and accessories
Wi-Fi antenna
RJ45 wiremap terminator ID#1 in plug and socket styles
15W USB-C power supply with UK, EU, US and AU plugs
Detachable carry strap
1m Cat 6A STP patch cord
FC-LC Visual Fault Locator adapter
Soft carry case
Quick reference guides in English, German, Spanish and French
SFP modules are not included. Compatible user-supplied SFP modules can be used to extend the tester's fibre diagnostic capabilities.

A Flexible Solution for Professional Network Support Combining copper cable testing, Multi-Gig link detection, PoE validation, switch discovery, IP diagnostics and wireless analysis, the TREND Networks NaviTEK III Tester R166004 provides a versatile solution for network installation and maintenance. Its fibre-ready design allows technicians to expand testing capabilities as required, while cloud reporting and remote support functions help streamline field operations. Suitable for IT departments, network installers, systems integrators and managed service providers, it offers a practical platform for diagnosing connectivity issues across modern network infrastructures.

The TREND Networks NaviTEK III Kit R166006 is a complete copper, fibre and Wi-Fi network troubleshooting kit designed for network technicians and IT support teams. Combining advanced cable testing, PoE validation, fibre diagnostics and wireless network analysis in one portable package, it provides the tools needed to identify faults, verify connectivity and troubleshoot live networks efficiently. Supplied with copper wiremap remotes, multimode and single-mode fibre accessories, SFP modules and cleaning tools in a rugged hard carry case, this comprehensive network tester kit helps simplify field diagnostics across a wide range of network environments.

Key Features of TREND Networks R166006 NaviTEK III Kit Complete copper cable testing with live wiremap, TDR fault location, cable length measurement, cable tracing, switch and port identification.
Multi-Gig Ethernet link detection up to 10Gb/s for network verification and troubleshooting.
12-way copper identification with ID#1–12 RJ45 plug and socket wiremap remote kits.
PoE validation up to 90W with support for IEEE 802.3af, 802.3at and 802.3bt standards and automatic Pass/Fail results.
Multimode and single-mode fibre testing with 850nm MM and 1310nm SM 1Gb/s SFP modules, duplex patch cords, loopback adapters and couplers.
Integrated Visual Fault Locator with a red laser source for checking fibre continuity and identifying breaks or bends.
Wi-Fi diagnostics for channel utilisation, access points, signal strength and performance, with compatible external Wi-Fi 5, Wi-Fi 6, Wi-Fi 6E and Wi-Fi 7 USB adapter support.
Network diagnostics including Ping, TraceRoute, device scanning, VLAN operation, 802.1x authentication and network service validation.
TREND AnyWARE Cloud connectivity for job pre-configuration, test result synchronisation and professional PDF reporting.
TeamViewer and VNC capabilities for remote technical assistance.
Comprehensive field testing accessories supplied in a rugged hard carry case.
Complete Copper Network Troubleshooting The NaviTEK III tester provides essential tools for diagnosing copper Ethernet cabling and verifying network connectivity. Live wiremap testing identifies wiring faults, while Time Domain Reflectometry (TDR) helps locate cable faults. Technicians can also measure cable length, trace cables, identify connected switches and ports, and detect Multi-Gig Ethernet links up to 10Gb/s. These functions support efficient fault-finding during installation, maintenance and network upgrades.

12-Way RJ45 Wiremap Identification Included ID#1–12 RJ45 plug and socket wiremap remote kits help technicians identify and test multiple network outlets efficiently. The numbered remotes simplify cable mapping across patch panels, structured cabling systems and distributed network installations, reducing the time needed to locate and verify individual copper connections.

Power over Ethernet Validation up to 90W Verify Power over Ethernet delivery with support for IEEE 802.3af, 802.3at and 802.3bt standards. Automatic Pass/Fail results help technicians assess PoE performance when installing or troubleshooting powered devices such as wireless access points, IP cameras and VoIP phones. This helps confirm that network connections can provide the expected power for compatible equipment.

Multimode and Single-Mode Fibre Diagnostics The NaviTEK III Kit extends network troubleshooting to fibre-optic infrastructure with 850nm multimode and 1310nm single-mode 1Gb/s SFP modules. Included LC-LC and LC-SC duplex patch cords, loopback adapters and duplex couplers support fibre connection checks and diagnostic testing. This combination allows technicians to work across different fibre interfaces without sourcing the main accessories separately.

Integrated Fibre Visual Fault Locator A built-in Visual Fault Locator (VFL) provides a visible red laser source for checking fibre continuity and identifying potential breaks or bends. The supplied FC-LC VFL adapter supports the included fibre testing accessories, while the 1.25mm and 2.5mm fibre cleaning pens help maintain clean connector end faces and reliable optical connections.

Advanced Wi-Fi Network Analysis Investigate wireless network performance with tools for analysing channel utilisation, detecting access points and assessing signal strength. Support for compatible external Wi-Fi USB adapters covering Wi-Fi 5, Wi-Fi 6, Wi-Fi 6E and Wi-Fi 7 expands wireless diagnostic capabilities, subject to adapter compatibility. These features help technicians investigate wireless connectivity issues and assess the surrounding network environment.

Network Connectivity and Service Testing Built-in network diagnostic tools support Ping, TraceRoute, device scanning, VLAN operation, 802.1x authentication and network service validation. By testing connectivity and investigating network paths, technicians can identify communication issues across copper, fibre and Wi-Fi networks. These capabilities make the NaviTEK III Kit suitable for installation verification, fault diagnosis and ongoing network maintenance.

Cloud Reporting and Test Result Management TREND AnyWARE Cloud connectivity supports job pre-configuration, test result synchronisation and professional PDF report generation. These functions help standardise field workflows, maintain accessible test records and provide clear documentation for customers, project managers and network support teams.

Remote Assistance for Field Technicians TeamViewer and VNC support remote assistance workflows, helping technical teams provide guidance when troubleshooting issues at customer sites or remote installations. Combined with the tester's diagnostic functions and reporting capabilities, remote support can help streamline fault investigation and collaboration between field engineers and central IT teams.

Comprehensive Kit Contents The NaviTEK III Kit R166006 is supplied with the tester and a comprehensive selection of accessories for copper, fibre and Wi-Fi network diagnostics.

NaviTEK III tester with copper, fibre and Wi-Fi testing capabilities
Wi-Fi antenna
15W USB-C power supply with UK, EU, US and AU plugs
Detachable carry strap
1m Cat 6A STP patch cord
FC-LC Visual Fault Locator adapter
Rugged hard carry case
Quick reference guides
ID#1–12 RJ45 plug wiremap remote kit (R166020)
ID#1–12 RJ45 socket wiremap remote kit (R166021)
850nm multimode 1Gb/s SFP module
Multimode LC-LC and LC-SC duplex patch cords
Multimode LC and SC loopback adapters
1310nm single-mode 1Gb/s SFP module
Single-mode LC-LC and LC-SC duplex patch cords
Single-mode SC and LC loopback adapters
Single-mode LC and SC duplex couplers
1.25mm and 2.5mm fibre cleaning pens
Designed for Professional Network Maintenance Combining copper cable verification, PoE testing, fibre diagnostics, wireless analysis and live-network troubleshooting in one package, the TREND Networks NaviTEK III Kit R166006 is designed for IT support teams, network installers and field service technicians. Its extensive accessory set, portable carry case and cloud-connected reporting tools provide a practical solution for diagnosing faults, validating installations and maintaining network infrastructure across multiple connection types.

The TREND Networks TRADE166004 Trade In offer provides an opportunity to upgrade an eligible legacy network tester to the NaviTEK III Copper/Wi-Fi Network Troubleshooter with fibre-ready capability. Receive a discount when trading in an eligible tester and benefit from advanced copper cable diagnostics, PoE validation, Multi-Gig link detection, IP troubleshooting and Wi-Fi analysis in one handheld device. With TREND AnyWARE Cloud connectivity, professional reporting, remote support and compatibility with optional fibre SFP modules, the NaviTEK III helps IT teams, network technicians and managed service providers diagnose connectivity issues and maintain modern network infrastructure more efficiently.

Key Features of TREND Networks TRADE166004 Trade In Trade in an eligible legacy network tester to receive a discount on the NaviTEK III Tester.
Live copper wiremap testing, TDR distance-to-fault, cable length measurement and analogue or digital tone generation.
Multi-Gig Ethernet link detection from 10Mb/s to 10Gb/s, including 2.5Gb/s and 5Gb/s connections.
PoE Type 1–4 and Class 0–8 classification with selectable high or low load testing up to 90W and automatic Pass/Fail results.
Switch and port identification using LLDP, CDP and EDP, with visibility of VLAN, link speeds, PoE information, switch name, IP address and MAC address.
Network diagnostics for DHCP, IP configuration, DNS, gateway and internet connectivity, plus Ping, TraceRoute and device discovery.
Wi-Fi 5 analysis on 2.4GHz and 5GHz, with support for compatible external Wi-Fi 5, Wi-Fi 6, Wi-Fi 6E and Wi-Fi 7 USB adapters.
Wireless analysis of channels, utilisation, access points, signal strength and data rate, with visual and audible access point location indicators.
Fibre-ready diagnostics with an integrated Visual Fault Locator and support for optional 1Gb/s SFP modules.
TREND AnyWARE Cloud integration for project transfers, test result synchronisation and professional report generation.
TeamViewer and VNC remote support through the dedicated Gigabit Ethernet management port.
Eligible trade-in brands and models include NetXpert™, LANXpert™, LinkRunner™ (any model), EtherScope™, OneTouch™, NaviTEK™, SignalTEK™ and ISO/TIA-compliant cable certifiers rated at 100MHz or higher.
Trade In and Upgrade to NaviTEK III Upgrade your network testing equipment through the TRADE166004 trade-in offer. Trade in an eligible legacy tester and receive a discount on the NaviTEK III Tester, gaining access to advanced copper, PoE, IP and Wi-Fi troubleshooting in one handheld solution. The offer provides a practical route to modernising network diagnostic capabilities while helping technicians investigate faults across cabling, switches, connected devices and wireless infrastructure.

Eligible Network Testers for Trade In The trade-in offer accepts eligible equipment from a range of established network testing brands, making it suitable for organisations looking to upgrade existing diagnostic tools.

NetXpert™ network testers
LANXpert™ network testers
LinkRunner™ testers of any model
EtherScope™ network analysers
OneTouch™ network testers
NaviTEK™ network testers
SignalTEK™ network testers
Any ISO/TIA-compliant cable certifier rated at 100MHz or higher
Copper Cable and Physical Layer Diagnostics The NaviTEK III helps identify copper Ethernet cabling faults through live wiremap testing, Time Domain Reflectometry (TDR) distance-to-fault measurements and cable length measurement. Selectable analogue and digital tone generation supports cable tracing and connection identification. These tools help technicians locate faults, verify cabling and reduce troubleshooting time during network installation and maintenance.

Multi-Gig Ethernet and PoE Validation Detect Ethernet link speeds from 10Mb/s to 10Gb/s, including 2.5Gb/s and 5Gb/s connections, to verify network link negotiation. PoE testing identifies Type 1–4 and Class 0–8 power delivery, with selectable high or low load testing up to 90W and automatic Pass/Fail results. Together, these functions help technicians investigate connectivity and power delivery issues affecting compatible network devices.

Switch Identification and Network Diagnostics View LLDP, CDP and EDP discovery information to identify connected switches and ports, including port details, VLAN, advertised speeds, PoE data, switch name, IP address and MAC address. Additional diagnostic tools validate DHCP and IP configuration, DNS, gateway and internet connectivity, while Ping, TraceRoute and device discovery help isolate communication issues across the network.

Advanced Wi-Fi Troubleshooting Investigate wireless connectivity and performance with built-in Wi-Fi 5 support across the 2.4GHz and 5GHz bands. Compatible external USB adapters can extend support to Wi-Fi 5, Wi-Fi 6, Wi-Fi 6E and Wi-Fi 7. Analyse channel utilisation, identify access points, assess signal strength and data rate, and use visual and audible indicators to help locate access points and investigate wireless coverage issues.

Fibre-Ready Testing Capabilities The integrated Visual Fault Locator supports fibre continuity checks and helps identify potential breaks or bends. Optional compatible 1Gb/s SFP modules and fibre accessories extend testing to fibre length measurement, live receive power monitoring, SFP information and active-network diagnostics. SFP modules are not included with the tester and must be supplied separately.

TREND AnyWARE Cloud and Professional Reporting TREND AnyWARE Cloud connectivity enables project uploads and downloads over Wi-Fi or wired Ethernet, test result synchronisation and professional report generation. These capabilities help standardise testing workflows, maintain records and provide clear documentation for network installations, maintenance activities and customer handovers.

Remote Support for Network Technicians TeamViewer and VNC remote control capabilities support collaboration between field technicians and remote IT teams. Using the dedicated Gigabit Ethernet management port, technicians can access remote assistance workflows to help investigate network faults and resolve issues across customer sites and distributed infrastructure.

Supplied Accessories and Equipment The NaviTEK III Tester supplied through the TRADE166004 offer includes essential accessories for copper and Wi-Fi testing, with fibre-ready functionality available through optional compatible SFP modules and accessories.

NaviTEK III tester with copper and Wi-Fi testing capabilities
Wi-Fi antenna
RJ45 wiremap terminator ID#1 in plug and socket styles
15W USB-C power supply with UK, EU, US and AU plugs
Detachable carry strap
1m Cat 6A STP patch cord
FC-LC Visual Fault Locator adapter
Soft carry case
Quick reference guides in English, German, Spanish and French
SFP modules are not included. Compatible user-supplied SFP modules can be used to extend fibre testing capabilities.

Modernise Your Network Testing Equipment The TREND Networks TRADE166004 Trade In offer helps organisations move from eligible legacy testers to a flexible network troubleshooting solution. With copper diagnostics, Multi-Gig link detection, PoE validation, IP and Wi-Fi analysis, fibre-ready functionality, cloud reporting and remote support, the NaviTEK III is designed to support the demands of modern network maintenance. It is a practical upgrade option for IT departments, network installers, systems integrators and managed service providers seeking broader diagnostic capabilities in a single handheld tester.

The TREND Networks TRADE166006 Trade In offer provides an opportunity to upgrade an eligible legacy network tester to the NaviTEK III Copper/Fibre/Wi-Fi Network Troubleshooting Kit. Receive a discount when trading in qualifying equipment and gain a complete network diagnostic solution covering copper cabling, PoE validation, fibre testing, IP connectivity and wireless analysis. Supplied with multimode and single-mode SFP modules, copper wiremap remotes, fibre patch cords, loopback adapters and cleaning tools in a rugged hard carry case, this comprehensive kit helps IT teams, network technicians and managed service providers troubleshoot diverse network environments. TREND AnyWARE Cloud connectivity, professional PDF reporting and remote support further streamline field testing, documentation and maintenance workflows.

Key Features of TREND Networks TRADE166006 Trade In Trade in an eligible legacy network tester to receive a discount on the complete NaviTEK III Kit.
Live copper wiremap testing, TDR fault location, cable length measurement, cable tracing and switch or port identification.
Multi-Gig Ethernet link detection up to 10Gb/s.
12-way copper identification with ID#1–12 RJ45 plug and socket wiremap remote kits.
PoE validation up to 90W with IEEE 802.3af, 802.3at and 802.3bt support and automatic Pass/Fail results.
Multimode and single-mode fibre testing with 850nm MM and 1310nm SM 1Gb/s SFP modules, duplex patch cords, loopback adapters and couplers.
Integrated Visual Fault Locator for checking fibre continuity and identifying breaks or bends.
Wi-Fi diagnostics for channel utilisation, access points, signal strength and performance, with support for compatible external Wi-Fi 5, Wi-Fi 6, Wi-Fi 6E and Wi-Fi 7 USB adapters.
Network diagnostics including Ping, TraceRoute, device scanning, VLAN operation, 802.1x support and network service validation across copper, fibre and Wi-Fi.
TREND AnyWARE Cloud connectivity for job pre-configuration, result synchronisation and professional PDF report generation.
TeamViewer and VNC support for remote assistance to field technicians.
Rugged hard carry case with a comprehensive selection of copper, fibre and network testing accessories.
Eligible trade-in equipment includes NetXpert™, LANXpert™, LinkRunner™ (any model), EtherScope™, OneTouch™, NaviTEK™, SignalTEK™ and ISO/TIA-compliant cable certifiers rated at 100MHz or higher.
Trade In and Upgrade to the NaviTEK III Kit The TRADE166006 trade-in offer helps organisations upgrade their existing network testing equipment to a comprehensive copper, fibre and Wi-Fi troubleshooting solution. Trade in an eligible legacy tester and receive a discount on the NaviTEK III Kit, combining advanced network diagnostics with the fibre accessories and copper identification tools needed for professional field testing. This provides a practical way to modernise testing capabilities while consolidating essential equipment into one complete package.

Eligible Network Testers for Trade In The trade-in programme accepts eligible equipment from a range of established network testing brands, giving organisations flexibility when upgrading their existing diagnostic tools.

NetXpert™ network testers
LANXpert™ network testers
LinkRunner™ testers of any model
EtherScope™ network analysers
OneTouch™ network testers
NaviTEK™ network testers
SignalTEK™ network testers
ISO/TIA-compliant cable certifiers rated at 100MHz or higher
Complete Copper Network Troubleshooting The NaviTEK III tester provides essential tools for investigating copper Ethernet cabling faults and verifying physical-layer connectivity. Live wiremap testing identifies wiring issues, while Time Domain Reflectometry (TDR) helps locate cable faults. Technicians can also measure cable length, trace cables, identify connected switches and ports, and detect Multi-Gig Ethernet links up to 10Gb/s. These capabilities support efficient fault-finding during installation, network maintenance and infrastructure upgrades.

12-Way RJ45 Wiremap Identification The included ID#1–12 RJ45 plug and socket wiremap remote kits simplify the identification and testing of multiple copper network outlets. Numbered remotes help technicians map connections across patch panels, structured cabling systems and distributed installations, reducing the time required to locate and verify individual network links.

Power over Ethernet Validation up to 90W Verify Power over Ethernet delivery with support for IEEE 802.3af, 802.3at and 802.3bt standards. Automatic Pass/Fail results help technicians assess power delivery when installing or troubleshooting compatible devices such as wireless access points, IP cameras and VoIP phones. This functionality supports the investigation of power-related network faults and helps verify PoE performance in the field.

Multimode and Single-Mode Fibre Testing The NaviTEK III Kit includes 850nm multimode and 1310nm single-mode 1Gb/s SFP modules for fibre network diagnostics. Multimode and single-mode LC-LC and LC-SC duplex patch cords, loopback adapters and duplex couplers support connection checks and diagnostic testing across different fibre interfaces. Having these accessories supplied with the tester helps technicians move between copper and fibre troubleshooting without sourcing the main testing components separately.

Integrated Visual Fault Locator The built-in Visual Fault Locator (VFL) uses a visible red laser source to check fibre continuity and help identify potential breaks or bends. The supplied FC-LC VFL adapter supports the included fibre testing accessories, while the 1.25mm and 2.5mm fibre cleaning pens help maintain clean connector end faces. These tools support practical fibre inspection and troubleshooting during installation and maintenance.

Advanced Wi-Fi Network Diagnostics Analyse wireless network environments using tools for channel utilisation, access point discovery, signal strength and performance assessment. Support for compatible external Wi-Fi USB adapters covering Wi-Fi 5, Wi-Fi 6, Wi-Fi 6E and Wi-Fi 7 extends wireless diagnostic options. These capabilities help technicians investigate wireless connectivity issues, assess channel conditions and troubleshoot performance across supported Wi-Fi environments.

Network Connectivity and Service Validation Built-in network diagnostic tools support Ping, TraceRoute, device scanning, VLAN operation, 802.1x authentication and network service validation. These functions help technicians investigate communication paths, identify connected devices and isolate connectivity issues across copper, fibre and Wi-Fi networks. The tester supports troubleshooting across multiple layers of network infrastructure, from physical connections to network services.

TREND AnyWARE Cloud and Professional Reporting TREND AnyWARE Cloud connectivity supports job pre-configuration, test result synchronisation and professional PDF report generation. These features help standardise field testing workflows, maintain accessible test records and produce clear documentation for customers, project managers and IT support teams. Cloud-connected reporting can simplify the management of testing results across multiple technicians and installations.

Remote Support for Field Technicians TeamViewer and VNC capabilities support remote assistance workflows, helping technical teams collaborate with technicians working at customer sites or remote locations. Combined with the tester's copper, fibre and Wi-Fi diagnostic functions, remote support can help streamline fault investigation and provide additional guidance during network maintenance and troubleshooting.

Comprehensive Kit Contents The NaviTEK III Kit supplied through the TRADE166006 offer includes the tester, copper identification remotes, fibre testing accessories and essential equipment for field diagnostics.

NaviTEK III tester with copper, fibre and Wi-Fi testing capabilities
Wi-Fi antenna
15W USB-C power supply with UK, EU, US and AU plugs
Detachable carry strap
1m Cat 6A STP patch cord
FC-LC Visual Fault Locator adapter
Rugged hard carry case
Quick reference guides
ID#1–12 RJ45 plug wiremap remote kit (R166020)
ID#1–12 RJ45 socket wiremap remote kit (R166021)
850nm multimode 1Gb/s SFP module
Multimode LC-LC and LC-SC duplex patch cords
Multimode LC and SC loopback adapters
1310nm single-mode 1Gb/s SFP module
Single-mode LC-LC and LC-SC duplex patch cords
Single-mode SC and LC loopback adapters
Single-mode LC and SC duplex couplers
1.25mm and 2.5mm fibre cleaning pens
Upgrade to a Complete Network Troubleshooting Solution The TREND Networks TRADE166006 Trade In offer combines the benefits of upgrading legacy testing equipment with the convenience of a comprehensive copper, fibre and Wi-Fi diagnostic kit. With Multi-Gig link detection, PoE validation, fibre testing accessories, network service diagnostics, cloud reporting and remote support, the NaviTEK III Kit is designed to help IT teams, network installers, systems integrators and managed service providers maintain and troubleshoot modern network infrastructure. Its extensive accessory package and rugged carry case provide a practical solution for technicians who need versatile testing capabilities in the field.

The new NaviTEK NT is a network tester for troubleshooting and maintenance of active and passive copper and fibre networks.

Incorporating an improved graphical interface NaviTEK NT allows network technicians to pinpoint and solve network connectivity issues faster than ever before. Subsequently, tests can be saved as pdf reports and shared with colleagues and clients using the free TREND AnyWare™ app.

Now includes a touchscreen
Network troubleshooter (copper/fibre)
PoE, service detection and port information
Real time display of network traffic
Test storage and PDF reporting
Cable tracing/distance to fault (TDR)
Supports TREND AnyWARE App
Kit Contents


1x NaviTEK NT Pro test unit with Touchscreen, 1x remote unit No. 1, 1x rechargeable power module 1x PSU EU/UK/US adapters, 2x patch cables - 30cm, Cat. 5e STP, USB Wi-Fi adapter, 1x quick reference guide, 1x carry case














Features

Includes everything in the NaviTEK NT Plus as well as the following:

Fibre optic cable interface
Logon using the 802.1x protocol
Optical interface with power indication
Performs tests for copper cabling and networks, including:

Display network configuration - IPv4 /IPv6 compatible
Advanced wiremap for miswires, split pairs, opens and shorts
Distance to opens and shorts (TDR)
PoE/PoE+ detection
Tone generator for cable tracing
Ping and Traceroute testing
Hub blink for port identification
DHCP client
Switch detection - 10/100/1000 Mb/s
User-exchangeable RJ45 inserts
Support for up to 12 wiremap remotes
Backlit colour screen
Autotest button performs a suite of network tests
Network Probe provides detailed port and network information of each device
Port identification using EDP/CDP/LLDP protocols
VLAN detection and support
Network scan
Traffic utilisation bar graph
Internal memory for 5000 test reports
Generate test reports (PDF or CSV)
Sent test reports from your mobile device using the free TREND AnyWARE App
Network troubleshooter (copper only)
PoE, service detection and port information
Real time display of network traffic
Test storage and PDF reporting
Cable tracing/distance to fault (TDR)
Supports TREND AnyWARE App

Today, network technicians have a broad selection of software troubleshooting tools at their disposal and whilst useful in certain situations and environments they do have limitations. NaviTEK NT on the other hand offers a comprehensive suite of test and troubleshooting functionality only found on dedicated hand-held testers:-

Copper test interface
Fast detection of link and IP information including duplex, speed, port ID, VLAN, DNS, DHCP, Gateway status and IP address
Detects services such as ISDN, POTS and PoE
Accurate wire mapping including length measurement and distance to fault
Rugged, compact design permits use in confined spaces
Not susceptible to virus and malware attack

TREND Networks R153001W2 2 Year Warranty Extension - NaviTEK NT

Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)

TREND Networks R151005W2 2 Year Warranty Extension - NaviTEK NT PLUS with Touchscreen

Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)

TREND Networks R151006W2 2 Year Warranty Extension - NaviTEK NT PRO with Touchscreen

Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)

TREND Networks R151010W2 2 Year Warranty Extension - NaviTEK IE

Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)

The new NaviTEK NT is a network tester for troubleshooting and maintenance of active and passive copper and fibre networks.

Incorporating an improved graphical interface NaviTEK NT allows network technicians to pinpoint and solve network connectivity issues faster than ever before. Subsequently, tests can be saved as pdf reports and shared with colleagues and clients using the free TREND AnyWare™ app.
Now includes a touchscreen
Network troubleshooter (copper/fibre)
PoE, service detection and port information
Real time display of network traffic
Test storage and PDF reporting
Cable tracing/distance to fault (TDR)
Supports TREND AnyWARE App
Kit Contents

1x NaviTEK NT Plus test unit with Touchscreen, 1x remote unit No. 1, 1x rechargeable power module 1x PSU EU/UK/US adapters, 2x patch cables - 30cm, Cat. 5e STP, USB Wi-Fi adapter, 1x quick reference guide, 1x carry case





Features

Performs tests for copper cabling and networks, including:
Display network configuration - IPv4 /IPv6 compatible
Advanced wiremap for miswires, split pairs, opens and shorts
Distance to opens and shorts (TDR)
PoE/PoE+ detection
Tone generator for cable tracing
Ping and Traceroute testing
Hub blink for port identification
DHCP client
Switch detection - 10/100/1000 Mb/s
User-exchangeable RJ45 inserts
Support for up to 12 wiremap remotes
Backlit colour screen
Autotest button performs a suite of network tests
Network Probe provides detailed port and network information of each device
Port identification using EDP/CDP/LLDP protocols
VLAN detection and support
Network scan
Traffic utilisation bar graph
Internal memory for 5000 test reports
Generate test reports (PDF or CSV)
Sent test reports from your mobile device using the free TREND AnyWARE App
Network troubleshooter (copper only)
PoE, service detection and port information
Real time display of network traffic
Test storage and PDF reporting
Cable tracing/distance to fault (TDR)
Supports TREND AnyWARE App

Today, network technicians have a broad selection of software troubleshooting tools at their disposal and whilst useful in certain situations and environments they do have limitations. NaviTEK NT on the other hand offers a comprehensive suite of test and troubleshooting functionality only found on dedicated hand-held testers:-
Copper test interface
Fast detection of link and IP information including duplex, speed, port ID, VLAN, DNS, DHCP, Gateway status and IP address
Detects services such as ISDN, POTS and PoE
Accurate wire mapping including length measurement and distance to fault
Rugged, compact design permits use in confined spaces
Not susceptible to virus and malware attack

Bundle - NaviTEK NT Pro, Accessories and 3 Year Warranty

The NTEK-KIT bundle includes a NaviTEK NT Pro, Active Remotes Full Kit, Amplifier Probe and 3 year warranty.

The TREND Networks NTEK-KIT NaviTEK NT Pro + Accessories + 3 Yr Warranty Bundle is a field-focused network testing package built for diagnosing copper and fibre links in live environments. It brings together a handheld tester with supporting tools and accessories to help identify cable faults, verify connectivity, and check network performance across a wide range of installations. The extended warranty adds longer-term coverage for ongoing professional use.

Key Features of TREND Networks NaviTEK NT Pro Display network configuration - IPv4 / IPv6 compatible
Advanced wiremap for miswires, split pairs, opens and shorts
Distance to opens and shorts (TDR)
PoE/PoE+ detection
Tone generator for cable tracing
Autotest button performs Ping and Traceroute test (network mode)
Hub blink for port identification
DHCP client
Switch detection - 10/100/1000 Mb/s
User-exchangeable RJ45 inserts
Support for up to 12 wiremap remotes
Backlit colour screen
Touchscreen
Custom wiremap
Autotest button performs a suite of network tests: Internet connectivity (Ping, DNS, Gateway, Traceroute) and NetScan
Network Probe (NET TEST) provides detailed network information of each device
Port identification using EDP/CDP/LLDP protocols
VLAN detection and support
Network scan (IP and MAC addresses of devices)
Traffic utilisation bar graph
Internal memory for 5000 test reports
Generate test reports (PDF or CSV)
TREND AnyWARE mobile app
Fibre optic cable interface
Logon using the 802.1x protocol
Optical power level and pass/fail indication with supported SFP
Loopback mode for transmission testing on both copper and fibre interfaces
Network Testing Capability The NaviTEK NT Pro unit provides structured testing across copper and fibre links, allowing technicians to confirm cable integrity, identify faults, and verify live network connections. It supports quick diagnostics in environments where uptime and accuracy are important.

Included Accessories and Field Use The kit includes remote units, tracing tools, and a carrying case designed for on-site work. These accessories support cable identification and troubleshooting across complex installations, making field tasks more efficient and organised.

Reporting and Workflow Support Test results can be stored and exported for documentation purposes, helping maintain clear records of network conditions. This supports structured reporting during installation, maintenance, and fault resolution work.

The NaviTEK IE is a tester for commissioning, preventative maintenance and troubleshooting of PROFINET Industrial Ethernet networks as well as standard Ethernet IP networks.

Designed to simplify the process, the NaviTEK IE identifies network nodes and configuration without requiring a PC and speciality software. An easy to understand system health check pinpoints potential issues before they become network failures. Automatically discover cable, network or device configuration/faults with the touch of a button.

To prove the network has been commissioned successfully, NaviTEK IE provides professional PDF reports that can be shared with colleagues and clients using the free TREND AnyWare™ mobile app.

Key Features of Trend Networks NaviTEK IE Pinpoint PROFINET cable faults (RJ45, M12, Fibre)
Easily configure nodes
Prevent network failures with the health check
Locate hard to find devices using the device blink
Find mis-configured devices using the NetMAP tool
Find rogue devices using the 48 hour event log
Display network configuration - IPv4 / IPv6 compatible
Wiremap for miswires, split pairs, opens and shorts
Distance to opens and shorts (TDR)
PoE/PoE+ detection and load test
Tone generator for cable tracing
Autotest button performs Ping and Traceroute test (network mode)
Hub blink for port identification
DHCP client
Switch speed detection - 10/100/1000 Mb/s
User-exchangeable RJ45 inserts
Support for up to 12 wiremap remotes
Backlit colour screen
Autotest button performs a suite of network tests: Internet connectivity (Ping, DNS, Gateway, Traceroute) and NetScan
Network Probe (NET TEST) provides detailed network information of each device
Port identification using EDP / CDP / LLDP protocols
VLAN detection
Traffic utilisation bar graph
Generate test reports (PDF or CSV)
Send test reports from mobile device using the free TREND AnyWARE App
Logon using the 802.1x protocol
Optical interface with power level and pass/fail indication with supported SFP
Loopback mode for transmission testing on both copper and fibre interfaces
Touchscreen
Custom wiremap
M12 PROFINET Cable Testing
PROFINET Fibre Cable Testing
Traffic light network health check
Device LED flash to locate devices faster
NETMAP compare - identify changes in the network
Configure node settings without the need for a laptop
List all network node details (IP Address, vendor details, software version etc.)
Ability to reset device to factory defaults
Device alarm/error detection
Professional Industrial Ethernet PDF reports
Industrial Network Visibility The NaviTEK IE provides a clear overview of connected devices, IP configurations, and network structure in real time. This allows engineers to quickly understand how systems are connected and identify irregularities without needing a laptop.

Comprehensive Cable Testing With detailed wiremapping and TDR-based diagnostics, the tester identifies faults such as breaks, shorts, and incorrect wiring. It supports both RJ45 and industrial M12 connections, ensuring compatibility across a wide range of installations.

Efficient Fault Detection The built-in health check and event logging features help track down intermittent faults that are often difficult to reproduce. This makes it easier to resolve ongoing network issues and maintain consistent performance.

Portable and Field-Ready Compact and battery-powered, the device is designed for use directly on-site. Its straightforward interface and automated testing functions allow users to complete diagnostics quickly, even in demanding industrial environments.

Kit Contents 1 x NaviTEK IE test unit
1 x Remote unit No. 1
1 x Rechargeable Power Module
1 x PSU EU/UK/US adapters
2 x Patch cables - 30cm
Cat. 5e STP
USB Wi-Fi adapter
1 x Quick reference guide
1 x Carry case
2 x PROFINET RJ45 (m) - M12 (f) D coded 1m adapter cable