The TREND Networks 151051 Mains Adapter and Battery Charger is a dedicated power accessory designed to supply stable electrical power and support charging functions for compatible network test equipment. It allows field engineers and technicians to operate devices directly from mains electricity or recharge internal battery systems where supported. Built for use across different regions, it includes interchangeable plug options, making it suitable for varied working environments and travel between job sites.
Key Features of Trend Networks 151051
Provides regulated DC output for stable device operation
Compatible with SignalTEK CT, SignalTEK NT, NaviTEK NT, LanXPLORER Pro
Compact design suited for field and workshop environments
Includes interchangeable plug heads
Charging Capability
Where compatible, the unit functions as a charger for internal battery packs, allowing equipment to be recharged between field tasks. This reduces downtime and supports continuous use in professional network testing environments.
Travel and Field Use
With interchangeable plug options and a compact form factor, the adapter is suited for engineers working across multiple sites or regions. It provides a consistent power source regardless of location, supporting mobile diagnostic workflows.
Note: Batteries Note Included
The TREND Networks 150062 Alkaline Battery Holder provides a practical power alternative for compatible network testing devices, allowing continued operation using standard alkaline batteries when rechargeable options are unavailable. Designed for straightforward installation, this accessory supports uninterrupted workflow in field environments where access to charging may be limited. Its compact and lightweight form makes it easy to carry as a backup, ensuring your testing equipment remains ready whenever it is needed.
Key Features of TREND Networks 150062
Compatible with LanXPLORER and UniPRO MGig1 Network Testers
Supports use of standard alkaline batteries
Ideal for field use where charging is not available
Simple installation and removal
Compact and lightweight for easy transport
Quick Swap Design
Allows fast replacement of battery modules, helping minimise downtime and keeping essential testing tasks moving without interruption.
Lightweight and Portable
Designed to be easily carried as part of a toolkit, making it a dependable spare accessory for day-to-day operations.
The TREND Networks 150060 Stylus pack provides a practical way to maintain accurate control over touchscreen network testers in demanding environments. Supplied as a set of three, these styluses are designed to deliver consistent, precise input when navigating menus, entering data, or running diagnostics on compatible handheld devices. Ideal as replacements or spares, they help keep workflows uninterrupted whether on-site or in the workshop.
Key Features of TREND Networks 150060
Pack of three stylus pens for convenient replacement or backup
Designed for accurate interaction with touchscreen testers
Compatible with TREND Networks handheld devices such as LanXPLORER and UniPRO series
Lightweight and easy to handle for extended use
Ideal for field engineers working in varied conditions
Designed for Precision
Each stylus allows controlled and accurate input, making it easier to navigate complex menus and input data without errors, even on compact screens.
Built for Field Use
With a simple, durable construction, these styluses are suited to daily use in testing environments where reliability and ease of handling are essential.
Compatible Accessory
Specifically designed for TREND Networks testers, these styluses integrate seamlessly with supported devices, maintaining consistent usability across tasks.
The TREND Networks Active Remote #1 is a compact testing companion designed to work alongside LanXPLORER, NaviTEK II and SignalTEK II devices, enabling accurate end-to-end cable verification. Positioned at the far end of a link, it allows technicians to carry out reliable wiremap testing without the need for a second operator. With clear LED pass/fail indication and seamless integration with supported testers, it supports efficient installation checks and fault identification across structured cabling environments.
Key Features of TREND Networks 150054
Active remote for end-to-end network cable testing
Compatible with LanXPLORER, NaviTEK II and SignalTEK II testers
Supports accurate wiremap verification
Clear LED pass/fail indication for quick results
Compact and lightweight design for easy deployment
Single remote unit with ID #1 for cable identification
Clear Visual Feedback
Integrated LED indicators provide straightforward pass or fail results, allowing quick interpretation during testing and helping to speed up installation and troubleshooting tasks.
Seamless Tester Compatibility
Fully compatible with a range of TREND Networks devices, including LanXPLORER, NaviTEK II and SignalTEK II, ensuring consistent performance across different testing platforms.
Compact and Practical Design
Lightweight and easy to handle, the unit is built for convenient placement in tight or distributed network environments, making it well suited to on-site testing scenarios.
The TREND Networks 151052 Alkaline Battery Module is a compact power unit designed to provide dependable field power for a range of TREND Networks cable testing instruments. Built around a 4 x AA alkaline cell arrangement, it offers a quick-swap power option for engineers working in environments where charging facilities are limited. Its modular design allows it to be inserted directly into compatible testers, helping maintain continuous operation during network installation and diagnostic tasks.
Key Features of TREND Networks 151052
4 x AA alkaline battery configuration in a single removable module
Designed for direct compatibility with the NaviTEK II, SignalTEK II, and UniPRO SEL1 TREND Networks testers
Quick replacement format for minimal interruption during field work
Portable power option for on-site testing environments
Field Power Accessibility
The module provides a straightforward way to keep testing equipment operational when access to mains charging is not available. It is suited for mobile engineers who require a reliable backup power source during installations or fault finding.
The TREND Networks 151053 NiMH battery is a dedicated rechargeable power module designed for use with NaviTEK II, SignalTEK II, and UniPRO SEL1 handheld testing equipment. It provides a dependable on-device power source for field engineers working on network diagnostics and cabling verification tasks. Built for repeated use, it supports quick swapping in the field to reduce downtime during testing activities.
Key Features of Trend Networks 151053
Compatible with NaviTEK II, SignalTEK II, and UniPRO SEL1 devices
Quick-release modular design for fast battery replacement in the field
Stable power delivery for handheld network test equipment
Field-Ready Power Design
This battery is shaped for portable use in demanding testing environments where equipment must remain active for extended inspection sessions. Its removable structure allows technicians to carry spare packs and swap them when required.
Device Compatibility Focus
Engineered specifically for TREND Networks handheld testers, it integrates directly with supported models without additional adapters. This ensures consistent fit and reliable electrical connection during operation.
Pack of 10 Replacement Samtec LifeJack inserts with Samtec LifeJack tool for LanXPLORER, NaviTEK II, SignalTEK II, UniPRO MGig1 and UniPRO SEL1
The TREND Networks RJ45 insert extraction tool kit is designed for maintaining and servicing network testing equipment that uses replaceable RJ45 contact inserts. It provides a practical way to remove worn inserts and fit new LifeJack components, helping keep test devices operational in environments where connectors experience frequent use. The kit is intended for field engineers and technicians who need a straightforward method of maintaining consistent port performance across supported TREND Networks testers.
Key Features of 150058
Includes 1 RJ45 insert extraction and insertion tool
Supplied with 10 LifeJack RJ45 replacement inserts
Supports quick replacement of worn or damaged contact inserts
Field Maintenance Support
This kit is intended for on-site engineers who need to carry out quick repairs without returning equipment for servicing. The tool allows controlled removal and fitting of RJ45 inserts, reducing downtime during network testing work.
LifeJack Insert System
The included LifeJack inserts are designed as replaceable contact modules that sit within RJ45 ports of supported testers. When wear occurs, individual inserts can be swapped rather than replacing the full interface assembly.
Application Use
The kit is used across network installation, diagnostics, and verification tasks where testers are frequently connected and disconnected. It supports ongoing maintenance of test hardware used in structured cabling environments.
The VDV II Series are easy to use cable verification testers that check the integrity of copper cables found in domestic, commercial or industrial voice, data or video installations, including telephone wiring, data network and video/security cabling. These RJ45 remotes are an accessory to aid with the test and verification process.
Key Features of Trend Networks 158050
RJ45 remote set
For wiremapping and identifying 12 individual cables
For use with the Trend VDV II Cable Verifiers
Set of 12 x RJ45 remote units* (#1 - #12) for full wiremap testing, fault finding, length and ID
Deployment Use
These remote units are placed at cable endpoints to create a clear reference point for testing. Each numbered module corresponds to a specific cable run, making it easier to organise and verify multiple connections within structured cabling environments.
Compatibility and Workflow
They are intended for use with TREND Networks testing devices, allowing technicians to perform identification and mapping without repeated physical tracing of cables. This supports a more direct workflow when working through patch panels and network outlets.
Field Benefits
In active installation and maintenance environments, the numbered remote system reduces confusion across multiple cable routes. It helps maintain order during testing tasks and supports quicker recognition of correct cable endpoints across larger network infrastructures.
TREND Networks Set of five active remotes #2 to #6 with included cables is a field-ready accessory kit designed for structured cabling identification and verification tasks. It provides multiple uniquely numbered remote units that allow fast correlation of cable runs when used with compatible TREND Networks testers such as LanXPLORER, NaviTEK II, and SignalTEK models.
Key Features of Trend Networks 150059
Set includes five active remotes numbered #2 through #6 for clear cable identification
Works with TREND Networks LanXPLORER, NaviTEK II/NT, and SignalTEK tester ranges
Supports cable tracing, mapping, and continuity verification across multiple runs
Each remote features a distinct ID for quick recognition during testing tasks
Field Identification Workflow
It comes with 5 active remotes, numbered #2 to #6. They contain advanced 2-sided wire mapping technology and LED lights on the remotes indicating whether the network cable troubleshoot passes or fails
Compatibility Scope
This kit is intended for use across TREND Networks copper testing platforms, supporting workflows in both small-scale office setups and larger structured cabling systems where multiple runs must be verified.
Deployment Use
It is commonly used during installation checks, fault location tasks, and documentation of network cabling layouts, helping technicians confirm correct cable routing and termination.
Amplifier Probe:
Works with any Tone Generator (62-160) to identify and trace wires within a group
Volume control for increased sensitivity and adjustable to suit work environment
Recessed ON/OFF button prevents battery drain
Battery low indicator
9 volt battery included
Tone Generator:
Provides four functions: tone generation, continuity testing, talk battery and line polarity confirmation
F-connector port for toning and tracing of coaxial CATV cabling systems
Three different tones selected from front panel
Separate Talk Battery status for increased voltage and power for test sets
Removable/replaceable test leads
Auto-OFF of tone after three hours to conserve battery life
Selectable normal and half volume output
Low battery indicator
9 volt battery included
TRACETone® Tone Generator and Amplifier Probe (62-140):
Test continuity and locate signal of installed wire and cable
Two selectable tone styles and adjustable volume control
Tone Generator & Amplifier Probe fit together for easy storage
RJ-11 Alligator Clip, RJ-11 Cable Assembly included
Kit-Contents:
1x Tone Generator, 1 x RJ45 to RJ11 patch cord, 1 x Crocodile to RJ45 Patch Cord, 1 x carry strap, 1 x user guide
Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)
Amplifier Probe for Data Cable Tracing
Kit Contents:
1 x Amplifier Probe, 1 x carry strap, 1 x user guide
Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)
Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)
10GBE MM FIBRE KIT 850NM SR
Kit Contents:
1x 850nm 10GBASE-SR MM SFP+ Transceiver, 2 x 2m LC-SC and 1x 2m LC-LC duplex MM patch cord and 1x SC/SC duplex through adapter.
The TREND Networks R157050 10GbE MM Fibre Kit (850nm SR) provides a practical way to connect and verify high-speed multimode fibre links. Built for use with compatible testing equipment, this kit includes the essential components required to support accurate 10 Gigabit Ethernet validation over short-range fibre infrastructure. Designed for environments such as data centres and structured cabling systems, it enables consistent link setup and reliable performance checks using standard 850nm SFP+ technology.
Key Features of TREND Networks R157050
Supports 10GbE multimode fibre testing at 850nm (SR)
Includes SFP+ transceiver for high-speed connectivity
Supplied with LC-SC and LC-LC multimode patch cords
Designed for use with SignalTEK 10G testers
Compatible with OM3 and OM4 fibre cabling
Built for 10GbE Testing
Designed to support 10 Gigabit Ethernet environments, this kit allows technicians to establish reliable test connections over multimode fibre. The inclusion of SR optics ensures compatibility with common short-range network deployments.
Complete Fibre Kit
With a selection of duplex patch leads and an SFP+ module included, the kit removes the need to source individual components separately. This makes setup straightforward when preparing fibre links for testing or verification.
Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)
Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)
Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)
1GBE SM FIBRE KIT 1310/1550NM
Kit Contents:
1x 1310nm and 1x 1550nm 1000BASE-BX SM bidirectional SFP Transceivers, 2 x 2m LC-SC and 1x 2m LC-LC simplex SM patch cord and 1x SC/SC duplex through adapter
The TREND Networks R157052 1GbE SM Fibre Kit (1310/1550nm) is designed for field verification and testing of single-mode fibre links carrying Gigabit Ethernet traffic. It uses a matched pair of bi-directional SFP modules operating on complementary wavelengths to support communication over a single fibre strand, making it suitable for installation checks, commissioning tasks, and fault identification across long-distance fibre runs.
Key Features of TREND Networks R157052
Supports 1GbE (1000BASE-BX10) single-mode fibre connectivity
Bi-directional operation using 1310nm and 1550nm wavelength pairing
Designed for single-fibre transmission to reduce cabling requirements
Typical reach up to approximately 10 km on single-mode fibre
Includes LC and SC patch leads for flexible connectivity during testing
Used for fibre link validation, commissioning, and troubleshooting tasks
Fibre Testing Application
This kit is used during installation and maintenance work to confirm that single-mode fibre links are carrying stable Gigabit Ethernet signals. It allows engineers to check continuity and signal integrity before network activation.
Bi-Directional Signal Design
The system uses two different wavelengths to transmit and receive data over a single fibre core, enabling two-way communication without requiring a duplex fibre pair.
10GBE SM FIBRE KIT 1310NM LR
Kit Contents:
1x 1310nm 10GBASE-LR SM SFP+ Transceiver, 2 x 2m LC-SC and 1x 2m LC-LC duplex SM patch cord and 1x SC/SC duplex through adapter.
The TREND Networks R157054 10GbE SM Fibre Kit 1310nm LR is designed for validating and simulating long-range single-mode fibre links used in 10 Gigabit Ethernet environments. Operating at 1310nm wavelength, it supports LR optical standards and is commonly paired with network test equipment to confirm link performance, stability, and correct fibre installation across extended distances.
Key Features of TREND Networks R157054
Supports 10GbE LR (Long Reach) single-mode fibre testing at 1310nm wavelength
Designed for use with fibre certification and network test platforms
Includes SFP+ optical transceiver for 10GBASE-LR link simulation
Suitable for long-distance fibre validation up to approximately 10 km depending on network conditions
Supplied with LC and SC patch cables for flexible connectivity and testing setups
Supports accurate fibre link verification in structured cabling environments
Fibre Link Validation
The kit is used to confirm correct operation of single-mode fibre links, ensuring signal integrity across long-distance 10GbE deployments.
Optical Compatibility
Built around the 1310nm LR standard, it aligns with widely deployed 10GBASE-LR optical systems used in backbone and inter-building connectivity.
10GBE SM FIBRE KIT 1550NM ER
Kit Contents:
1x 1550nm 10GBASE-ER SM SFP+ Transceiver, 2 x 2m LC-SC and 1x 2m LC-LC duplex SM patch cord and 1x SC/SC duplex through adapter.
The TREND Networks R157051 10GbE SM Fibre Kit is designed for accurate testing of long-distance single-mode fibre links using 1550nm ER optics. Built to support high-speed 10 Gigabit Ethernet environments, this kit provides the essential components required to validate performance, confirm link integrity, and identify faults across extended network runs. Ideal for installation, maintenance, and troubleshooting tasks, it allows technicians to confidently assess fibre infrastructure where distance and signal consistency are critical.
Key Features of TREND Networks R157051
Supports 10GbE testing over single-mode fibre
1550nm extended reach (ER) optics for long-distance applications
Includes SFP+ transceiver and fibre patch leads
Designed for use with compatible 10G network testers
Suitable for installation, verification, and fault finding
Long-Distance Fibre Testing
Using 1550nm ER optics, the kit is well suited for testing fibre links that span greater distances, making it a practical choice for backbone infrastructure, campus networks, and large-scale deployments.
Complete Testing Kit
Supplied with transceivers, patch cords, and adapters, the kit provides everything needed to establish a reliable test setup without sourcing additional components.
Designed for 10GbE Environments
Built to meet the demands of modern high-speed networks, it enables accurate validation of 10 Gigabit Ethernet performance across single-mode fibre connections.
10GBE SM FIBRE KIT 1270/1330NM
Kit Contents:
1x 1270nm and 1x 1330nm 10GBASE-BX SM bidirectional SFP+ Transceivers, 2 x 2m LC-SC and 1x 2m LC-LC simplex SM patch cord and 1x SC/SC duplex through adapter
The TREND Networks R157053 10GbE SM Fibre Kit 1270/1330nm is designed for validating high-speed single-mode fibre links using a bidirectional transceiver pair. It supports 10 Gigabit Ethernet communication over a single fibre strand, making it suitable for installation, commissioning, and fault-checking tasks in fibre network environments.
Key Features of Trend Networks R157053
10GbE single-mode fibre testing capability
BiDi SFP+ transceivers operating at 1270nm and 1330nm
Full duplex communication over a single fibre core
Supports 10GBASE-BX10 standard transmission
Includes patch cords and SC adapter for field deployment
Single Fibre Bidirectional Operation
This kit allows data transmission in both directions over a single strand of single-mode fibre, reducing cabling requirements during testing and validation work.
Field Testing Compatibility
Designed for use with network test platforms, it supports real-world validation of 10GbE links during installation and maintenance activities.
Deployment Ready Components
Supplied with optical transceivers and patch leads, the kit is ready for immediate use in structured fibre environments where quick setup is required.
