StarTech Desktop and Server Network Cards

1 Port PCI Express 10/100 Ethernet Network Interface Adapter Card

Add a 10/100Mbps Ethernet port to a desktop computer through a PCI Express slot






 



This PCI Express based 10/100 Ethernet Card provides a simple way to connect a PCIe enabled server or workstation to a 10/100 Ethernet network and offers a broad range of features and functions, including support for both Full and Half Duplex operation as well as Wake On LAN (WOL) Power Management.


The PEX100S Ethernet Card includes both standard and low profile brackets and is compatible with most mATX (Slimline) and ATX system form factors, and features Auto MDI/MDIX automatic configuration, which helps to simplify installation and configuration.





The following table provides descriptions of the 100 Link/Activity LED status:




 






Applications:

Replacement Ethernet card for a home or office desktop computer
Adding Ethernet network connectivity for broadband Internet access to an old desktop computer
Adding a second or redundant network connection for a workstation or server









Features:

Single 10/100Mbps RJ45 Ethernet port
Compliant with IEEE802.3 CSMA/CD, 802.3 10Base-T and 100Base-TX standards
Crossover Detection & Auto-Correction (Auto-MDIX)
Full and Half duplex mode support
Link speed and duplex mode auto-negotiation
Link/Activity and 10/100Mbps LED indicators
Supports Wake-on-LAN
Full/Low Profile installation brackets included









The StarTech.com Advantage:

Cost effective and simple Ethernet networking for a desktop computer systems
Backed by a StarTech.com lifetime warranty and free lifetime technical support









Ports & interfaces Internal Yes Host interface PCI Express Connectivity technology Wired

Bandwidth Maximum data transfer rate 100 Mbit/s

Network Chipset Realtek RTL8101E Ethernet LAN Yes Maximum data transfer rate 100 Mbit/s

Design Chipset Realtek RTL8101E Internal Yes

Weight & dimensions Width 120 mm Depth 92.5 mm Height 21 mm Weight 45 g

Packaging data Package width 172 mm Package depth 144 mm Package height 30 mm Package weight 124 g

Other features Chipset Realtek RTL8101E Ports quantity 1 Compatible operating systems Windows 98SE/ME/2000/XP/XP x64/Vista/Vista x64 Full specification and details can be found in the

1 Port PCI Express PCIe Gigabit Network Server Adapter NIC Card - Dual Profile

Add a 10/100/1000Mbps Ethernet port to any PC through a PCI Express slot






 



The ST1000SPEX2 PCIe Gigabit Ethernet Network Card adds a 10/100/1000 Mbps compatible RJ45 Ethernet port to a PCI Express-enabled client, server or workstation, providing a convenient addition or replacement networking interface.


Compliant with IEEE 802.3/u/ab standards, and with support for 9K Jumbo Frames, VLAN tagging and Wake on LAN (WOL), this versatile Gigabit NIC/Server Adapter delivers rock-solid performance.


Plus, the card includes both full profile and low profile/half-height installation brackets for installation in a wide range of computer/server chassis, regardless of form factor.


The ST1000SPEX2 network card is backed by a 2-year StarTech.com warranty and free lifetime technical support.




Product Diagram:

 






Applications:

Upgrade 10/100 Ethernet capability to Gigabit capability
Add an Ethernet port to a workstation or server computer, for redundancy or bridging
Add networking capabilities to an old system with no Ethernet port









Features:

A single 10/100/1000Mbps compatible RJ45 Ethernet port
Gigabit detection and Link/Activity LED indicators
Fully Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3x and IEEE 802.3ab standards
Supports IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding and IEEE 802.3x Full Duplex Flow Control
Jumbo frame support
Full and half duplex support
Supports Wake-on-LAN function
Crossover Detection & Auto-Correction (Auto MDI/MDI-X)
Includes a low profile/half-height installation bracket









The StarTech.com Advantage:

Fits into full-size or low profile/small form factor (SFF) systems, with the addition of a half-height bracket
Offers performance flexibility and easy setup with support for advanced features such as Jumbo Frames, Wake-On-LAN and Auto MDIX









Ports & interfaces Internal Yes Ethernet LAN (RJ-45) ports 1 Interface Ethernet Host interface PCI Express Connectivity technology Wired

Bandwidth Supported data transfer rates 10 / 100 / 1000 Mbit/s Full duplex Yes Maximum data transfer rate 1000 Mbit/s

Network Supported data transfer rates 10 / 100 / 1000 Mbit/s Chipset Realtek RTL8111E Ethernet interface type Gigabit Ethernet Jumbo frames 9000 Wi-Fi No Ethernet LAN Yes Cabling technology 10/100/1000BaseT(X) Networking standards IEEE 802.3,IEEE 802.3ab,IEEE 802.3u,IEEE 802.3x Wake-on-LAN ready Yes Auto MDIX IEEE Yes Supported network protocols CSMA/CD Jumbo frames support Yes Full duplex Yes Ethernet LAN data rates 10, 100, 1000 Mbit/s Maximum data transfer rate 1000 Mbit/s

Technical details Wake-on-LAN ready Yes Auto MDIX IEEE Yes Mean time between failures (MTBF) 376212 h Sustainability certificates RoHS

Design Chipset Realtek RTL8111E Certification CE, FCC Internal Yes Mean time between failures (MTBF) 376212 h LED indicators Activity, Link

Operating conditions Operating temperature (T-T) 0 - 70 °C Storage temperature (T-T) 0 - 100 °C Operating relative humidity (H-H) 10 - 90%

Packaging content Manual Yes Drivers included Yes Low-profile bracket Yes

Weight & dimensions Width 120.3 mm Depth 67.9 mm Height 18 mm Weight 40 g

Packaging data Package width 142 cm Package depth 171 cm Package height 32 cm Package weight 126 g Drivers included Yes Low-profile bracket Yes Manual Yes

Other features Jumbo frames 9000 Supported data transfer rates 10 / 100 / 1000 Mbit/s Chipset Realtek RTL8111E Manual Yes Full specification and details can be found in the

1 Port PCI Express PCIe Gigabit NIC Server Adapter Network Card - Low Profile

Add a 10/100/1000Mbps Ethernet port to any PC through a PCI Express slot






 



The ST1000SPEX2L Low-Profile PCIe Gigabit Network Card adds a 10/100/1000 Mbps compatible RJ45 Ethernet port to a PCI Express-enabled client, server or workstation, providing a convenient addition or replacement networking interface.


Compliant with IEEE 802.3/u/ab standards, and with support for 9K Jumbo Frames, VLAN tagging and Wake on LAN (WOL), this versatile Gigabit NIC/Server Adapter offers effective network performance.


The card comes pre-configured with a low-profile/half-height installation bracket and includes a standard profile bracket for installation in a wide range of computer/server chassis, regardless of form factor.


Backed by a 2-year StarTech.com warranty and free lifetime technical support.





Product Diagram:

 






Applications:

Upgrade from 10/100 Ethernet capability to Gigabit capability
Add an Ethernet port to a workstation or server computer, for redundancy or bridging
Add networking capabilities to an old system with no Ethernet port









Features:

A single 10/100/1000Mbps compatible RJ45 Ethernet port
Gigabit detection and Link/Activity LED indicators
Fully Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3x and IEEE 802.3ab standards
Supports IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding and IEEE 802.3x Full Duplex Flow Control
Jumbo frame support
Full and half duplex support
Supports Wake-on-LAN function
Crossover Detection & Auto-Correction (Auto MDI/MDI-X)









The StarTech.com Advantage:

Optimize network traffic with support for advanced features such as Jumbo Frames and VLAN tagging
Saves the time of having to adjust the mounting bracket, with a pre-configured half-height/low-profile bracket









Ports & interfaces Internal Yes Interface Ethernet Host interface PCI Express Connectivity technology Wired

Bandwidth Full duplex Yes Maximum data transfer rate 1000 Mbit/s

Network Chipset Realtek - RTL8111H Jumbo frames 9000 Ethernet LAN Yes Cabling technology 10/100/1000BaseT(X) Networking standards IEEE 802.3,IEEE 802.3ab,IEEE 802.3u,IEEE 802.3x Auto MDIX IEEE Yes Supported network protocols CSMA/CD Jumbo frames support Yes Full duplex Yes Ethernet LAN data rates 10, 100, 1000 Mbit/s Maximum data transfer rate 1000 Mbit/s

Technical details Auto MDIX IEEE Yes Sustainability certificates RoHS

Indication Power LED Yes Link / Act LED Yes LED indicators Activity, Link

Design Chipset Realtek - RTL8111H Certification CE, FCC, REACH Internal Yes LED indicators Activity, Link

Operating conditions Operating temperature (T-T) 0 - 70 °C Storage temperature (T-T) 0 - 100 °C Operating relative humidity (H-H) 10 - 90 %

Weight & dimensions Width 18 mm Depth 70 mm Height 49 mm Weight 27 g

Packaging data Package width 173 cm Package depth 144 cm Package height 31 cm Package weight 125 g Manual Yes

Other features Jumbo frames 9000 Chipset Realtek - RTL8111H Power LED Yes Manual Yes Link/Act LED Yes Full specification and details can be found in the

1-Port Gigabit Ethernet Network Card - PCI Express, Intel I210 NIC

Add Gigabit Ethernet to a client, server or workstation through a PCI Express slot


Boost the performance and capabilities of your server or desktop computer by adding a Gigabit Ethernet port through a PCI Express slot. This GbE (Gigabit Ethernet) network card makes it easy to create a high-performance, cost-effective networking solution.




The performance and reliability you demand in network connectivity This PCI Express Gigabit Ethernet card utilizes the Intel® I210-AT chipset, delivering the power, performance and enhanced capabilities you need for dependable network connections to your server or computer. Compliant with IEEE 802.3/u/ab standards, the GbE network card provides an effective upgrade or replacement network port, with a maximum throughput of up to 1000Mbps in each direction (2000 Mbps total) - up to ten times faster than 10/100 Ethernet.

The I210 chipset provides many advanced features to support load-balancing the flow of network traffic, to enhance throughput and provide greater data reliability. It also supports Audio-Video Bridging (AVB) to enable tightly controlled media stream synchronization, buffering and resource reservation.




A versatile and cost-effective solution Compatible with a broad range of operating systems, this versatile PCIe Gigabit NIC is ideal for many business applications requiring servers or workstation upgrades. It’s a cost-effective way to upgrade your server or computer from a 10/100 Ethernet port to a Gigabit Ethernet port, or add an Ethernet port to take advantage of advanced features such as VLAN tagging, Jumbo Frames, Wake-On-LAN and Auto MDIX.




Easy installation With a dual-profile design, the PCI Express network card installs easily into a wide range of computer/server chassis, regardless of form factor. The card comes equipped with a full-sized bracket, and includes a low-profile/half-height installation bracket that you can use as needed.




Enhance Productivity and Device Management with the StarTech.com Connectivity Tools Application Developed to improve performance and security, StarTech.com Connectivity Tools is the only software suite on the market that works with a wide range of IT connectivity accessories. The software suite includes:



Mac Address Pass-Through Utility: To improve network security.
Wi-Fi Auto Switch Utility: Enabling users to quickly access faster network speeds via wired LAN. 




For more information and to download the StarTech.com Connectivity Tools application, please visit: www.StarTech.com/Connectivity-Tools





Product Diagram:

 






Applications:

Upgrades to servers or workstations in need of enhanced performance, advanced features and greater reliability
Upgrade a 10/100 Ethernet port on your computer to GbE network capability
Add GbE networking capabilities to an old system that doesn't have an Ethernet port
Add an additional Ethernet port to a workstation or server computer for redundancy









Features:

Add a 10/100/1000 RJ-45 Ethernet port to a client, server or desktop through one PCIe slot
Intel I210-AT chipset
PXE network boot
Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Auto MDIX support
Autonegotiation support
Wake-on-LAN support
Up to 9K jumbo frame support
IEEE802.3az Energy Efficient Ethernet (EEE)
Supports IEEE 802.1Q VLAN tagging
Supports Audio-Video Bridging
Full or low-profile (LP bracket included) installation
Full duplex support
Connectivity tools: Provided with this device, the application improves performance and security, featuring MAC Address Changer & Wi-Fi Auto Switch utilities









The StarTech.com Advantage:

Protect critical networked systems with a redundant and independent Gigabit port
Optimize network traffic with support for advanced features such as Jumbo Frames and VLAN tagging
Maximize the networking efficiency of your virtualized server, with dedicated ports













 






Ports & interfaces Internal Yes Ethernet LAN (RJ-45) ports 1 Interface Ethernet Host interface PCI Express Connectivity technology Wired

Bandwidth Full duplex Yes Maximum data transfer rate 2000 Mbit/s

Network Chipset Intel® I210-AT VLAN tagging Yes Ethernet LAN Yes Cabling technology 10/100/1000BaseT(X) Networking standards IEEE 802.1Q,IEEE 802.3,IEEE 802.3ab,IEEE 802.3u,IEEE 802.3x Wake-on-LAN ready Yes Auto MDIX IEEE Yes Jumbo frames support Yes Full duplex Yes Ethernet LAN data rates 10, 100, 1000 Mbit/s Maximum data transfer rate 2000 Mbit/s Auto-negotiation Yes

Technical details Product colour Black, Metallic Wake-on-LAN ready Yes Auto MDIX IEEE Yes Sustainability certificates RoHS

Design Product colour Black, Metallic Chipset Intel® I210-AT Certification CE, FCC Internal Yes LED indicators Activity

Operating conditions Operating temperature (T-T) 5 - 50 °C Storage temperature (T-T) -20 - 60 °C Operating relative humidity (H-H) 20 - 80 %

Packaging content Mounting brackets included Yes Manual Yes

Weight & dimensions Width 66 mm Depth 120 mm Height 18 mm Weight 35 g

Packaging data Package width 142 mm Package depth 170 mm Package height 28 mm Package weight 100 g Mounting brackets included Yes Manual Yes

Other features Jumbo frames 9000 Chipset Intel® I210-AT Manual Yes Full specification and details can be found in the

Mini PCI Express Gigabit Ethernet Network Adapter NIC Card

Add a Gigabit RJ45 port through a Mini PCI Express slot






 



The ST1000SMPEX Mini PCI Express Gigabit Network Adapter Card adds 1000Mbps network connectivity to a Mini PCI Express (PCI Express Mini Card, Mini PCIe) enabled computer system, such as Mini-ITX motherboards.


Supporting features such as NDIS5 checksum and large send offload for lower CPU utilization, Wake-on-LAN (WOL) and Remote Wake-up power management, jumbo frames and VLAN tagging, this Mini PCI Express Gigabit Adapter is ready to handle a wide variety of scenarios.


Perfect for small form factor or embedded systems that originally lack Gigabit networking capability, or for adding a network connection without taking up a full-sized PCI Express slots, this high quality Mini PCIe Network Adapter includes a low profile/half-height bracket for additional installation options.


Backed by a StarTech.com 2-year warranty and free lifetime technical support.





Product Diagram:

 






Applications:

Add a Gigabit networking port to a small form factor mini-ITX system with a mini PCI Express slot
Add a Gigabit networking port to a Mini-ITX system through mini PCIe instead of taking up the full PCIe slot
Replacement for a failed built-in Gigabit Ethernet port









Features:

One 10/100/1000Mbps compatible RJ-45 Ethernet port
Fully complaint with IEEE 802.3, 802.3u, and 802.3ab specifications for 10/100/1000 Mbps connections
Jumbo Frame support up to 9k
Crossover Detection & Auto-Correction (Auto MDIX)
IEEE 802.1Q VLAN Tagging support
Supports Wake-on-LAN (WOL) and Remote Wake-up Support, Pair Swap/Polarity/Skew Correction
Microsoft NDIS5 Checksum Offload (IPv4, TCP, UDP) and Large Send Offload support
Supports Full and Half duplex operating modes
IEEE 802.3x Full Duplex Flow Control support
Compliant with PCI Express Mini Card specification 1.1
Includes Full and Low Profile installation brackets









The StarTech.com Advantage:

Full length mini PCI Express (PCI Express Mini Card, Mini PCIe) form factor fits in many Mini-ITX or embedded systems
Built-in NDIS5 Checksum and Large Send Offload support and Jumbo Frames minimize system resource usage
Backed by a StarTech.com 2-year warranty and free lifetime technical support









Ports & interfaces Internal Yes Ethernet LAN (RJ-45) ports 1 Interface Ethernet Host interface Mini PCI Express Connectivity technology Wired

Bandwidth Full duplex Yes Maximum data transfer rate 1000 Mbit/s

Network Chipset Realtek - RTL8111E VLAN tagging Yes Jumbo frames 9000 Ethernet LAN Yes Networking standards IEEE 802.1Q,IEEE 802.3,IEEE 802.3ab,IEEE 802.3u,IEEE 802.3x Wake-on-LAN ready Yes Auto MDIX IEEE Yes Jumbo frames support Yes Full duplex Yes Flow control support Yes Ethernet LAN data rates 10, 100, 1000 Mbit/s Maximum data transfer rate 1000 Mbit/s

Technical details Wake-on-LAN ready Yes Auto MDIX IEEE Yes Mean time between failures (MTBF) 482765 h Sustainability certificates RoHS

Design Chipset Realtek - RTL8111E Certification CE, FCC Internal Yes Mean time between failures (MTBF) 482765 h LED indicators Activity, Link

Operating conditions Operating temperature (T-T) 0 - 55 °C Storage temperature (T-T) -20 - 85 °C Operating relative humidity (H-H) 5 - 95%

Packaging content Manual Yes Drivers included Yes Low-profile bracket Yes Quantity 1

Weight & dimensions Width 30 mm Depth 51 mm Height 8 mm Weight 6 g

Packaging data Package width 144 cm Package depth 175 cm Package height 32 cm Package weight 150 g Drivers included Yes Low-profile bracket Yes Manual Yes Quantity 1

Other features Jumbo frames 9000 Chipset Realtek - RTL811E Manual Yes Flow control support Yes Full specification and details can be found in the

PCI Express AC1200 Dual Band Wireless-AC Network Adapter - PCIe 802.11ac WiFi Card

Add high speed 802.11ac WiFi connectivity to a desktop PC through a PCI Express slot with dual band 2.4/5 GHz frequencies and up to 867Mbps






 



The PEX867WAC22 PCI Express AC1200 Wireless Network Adapter lets you add dual-band Wireless-AC connectivity to a desktop computer through a PCIe slot.


With increased demand on network resources, this Wireless-AC adapter gives you exceptional speed and range for your office or home wireless network when paired with an 802.11ac router. This dual-band WiFi adapter supports maximum data rates of up to 867 Mbps on the 5GHz band (3x the speed of Wireless-N), plus up to 300 Mbps on the 2.4GHz band, making it the perfect solution for applications like HD video streaming, online conferencing, file transfers and gaming.


This versatile PCIe wireless card features a 2T2R (2 transmitter, 2 receiver) detachable antenna design, with an included magnetic antenna stand that can easily be mounted to the top or side of your PC case. Plus, the controller card is equipped with a standard profile bracket and includes a low-profile/half-height bracket for installation in small form-factor computers. To integrate with all of your networking devices, the adapter is also backward compatible with 802.11a/b/g/n networks.


Backed by a StarTech.com 2-year warranty, with free lifetime technical support.





Product Diagram:

 







 






Applications:

Replace or upgrade the wireless capabilities of your desktop system to the latest standard
Connect to the less congested 5 GHz WiFi band to avoid interference from common wireless devices such as cordless phones
Conference online, transfer files, stream HD video or game without lag, through faster wireless performance









Features:

Wireless AC1200 compatible (867 Mbps + 300 Mbps)
Compliant with 802.11 a/b/g/n/ac standards
Dual band 2.4 / 5 GHz support (802.11ac is 5 GHz only)
PCI Express host interface
2 Transmitter/2 Receiver (2x2:2) antenna configuration
Included magnetic antenna stand for side-mounting on your PC case
Supports WEP (64-128-bit), WPA and WPA2 wireless security
Supports WMM Quality of Service
Supports Soft AP mode
Configured with standard profile bracket, low profile/half-height bracket included









Ports & interfaces Internal Yes Interface Ethernet / WLAN Host interface PCI Express Connectivity technology Wireless

Bandwidth Full duplex Yes Maximum data transfer rate 867 Mbit/s

Wireless LAN features Wi-Fi band Dual-band (2.4 GHz / 5 GHz) Top Wi-Fi standard Wi-Fi 5 (802.11 ac) Wi-Fi standards 802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g,Wi-Fi 4 (802.11n) Wi-Fi Yes WLAN data transfer rates supported 300,867 Mbit/s

Network Chipset RTL8812AE Wi-Fi band Dual-band (2.4 GHz / 5 GHz) Top Wi-Fi standard Wi-Fi 5 (802.11 ac) Wi-Fi standards 802.11a,Wi-Fi 5 (802.11ac),802.11b,802.11g,Wi-Fi 4 (802.11n) Wi-Fi Yes Security algorithms 128-bit WEP, 64-bit WEP, TKIP, WEP, WPA, WPA2 Networking standards IEEE 802.11a,IEEE 802.11ac,IEEE 802.11b,IEEE 802.11g,IEEE 802.11n WLAN data transfer rates supported 300,867 Mbit/s Gain 5 dBi Full duplex Yes Frequency range 2.4 - 5 GHz Maximum data transfer rate 867 Mbit/s

Antenna Antenna Yes Gain 5 dBi Frequency range 2.4 - 5 GHz Detachable antenna(s) Yes Antenna connector type RP-SMA

Technical details Product colour Green Detachable antenna(s) Yes Sustainability certificates RoHS

Design Product colour Green Chipset RTL8812AE Antenna Yes Internal Yes LED indicators Activity, Link Detachable antenna(s) Yes Antenna connector type RP-SMA

Weight & dimensions Width 83 mm Depth 120 mm Height 18 mm Weight 370 g

Packaging data Package width 156 cm Package depth 210 cm Package height 59 cm Package weight 388 g Manual Yes

Other features Chipset RTL8812AE Manual Yes Gain 5 dBi Detachable antenna(s) Yes Full specification and details can be found in the

Dual Port Gigabit PCI Express Server Network Adapter Card - PCIe NIC

Add dual Gigabit Ethernet ports to a client, server or workstation through a PCI Express slot






 



The ST1000SPEXD4 PCI Express Dual-Port Gigabit Network Card lets you add two gigabit Ethernet ports to a client, server or workstation through a single PCIe slot. Each port provides 10/100/1000 Mbps capable Ethernet and is fully compatible with IEEE 802.3/u/ab standards.


Suitable for any standard PCI Express-enabled system, the 2-port Ethernet card supports full-duplex flow control for maximum data transfer speeds of up to 2000 Mbps - an ideal 2-port NIC for setting up dual-homed, or multi-homed host configurations providing added security to corporate networks.


The dual-port server adapter is compliant with the PCIe 2.0 standard and features support for Jumbo Frames and 802.1q VLAN tagging as well as Wake on LAN (WoL). The adapter includes an optional low-profile / half-height bracket that can be used for installation into a standard or small form-factor computer chassis.


Backed by a StarTech.com 2-year warranty and free lifetime technical support.





Applications:

Ideal for VM environments with multiple operating systems, requiring shared or dedicated NICs
Provide redundant connectivity to ensure an uninterrupted network connection
Configure a dual-homed proxy or gateway system for an added layer of security
Specially designed for desktop PC clients, servers, and workstations with few PCI Express slots available









Features:

Two 10/100/1000Mbps compatible RJ-45 Ethernet ports
Up to 9K Jumbo Frame support
Compatible with PCI Express Base Specification 2.0 (backward compatible with 1.0a/1.1)
Fully Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, and supports IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding and IEEE 802.3x Full Duplex Flow Control
Supports Microsoft NDIS5 Checksum Offload (IP, TCP, UDP) and Large send Offload
Wake-on-LAN / Remote Wake-up support
Configured with standard profile bracket, low profile/half-height bracket included
Supports Pair Swap / Polarity / Skew Correction









The StarTech.com Advantage:

Protect critical networked systems with a redundant and independent Gigabit port
Optimize network traffic with support for advanced features such as Jumbo Frames and VLAN tagging
Maximize the networking efficiency of your virtualized server, with dedicated ports









Ports & interfaces Internal Yes PCI version 2.0 Ethernet LAN (RJ-45) ports 2 Interface Ethernet Host interface PCI Express Connectivity technology Wired

Bandwidth Full duplex Yes Maximum data transfer rate 2000 Mbit/s

Network Chipset Realtek - RTL8111E, Asmedia - ASM1182E VLAN tagging Yes Ethernet interface type Gigabit Ethernet Jumbo frames 9000 Ethernet LAN Yes Cabling technology 10/100/1000BaseT(X) Networking standards IEEE 802.1Q,IEEE 802.1p,IEEE 802.3,IEEE 802.3ab,IEEE 802.3u,IEEE 802.3x Wake-on-LAN ready Yes Auto MDIX IEEE Yes Jumbo frames support Yes Full duplex Yes Flow control support Yes Maximum data transfer rate 2000 Mbit/s

Technical details Wake-on-LAN ready Yes Auto MDIX IEEE Yes Sustainability certificates RoHS

Design Chipset Realtek - RTL8111E, Asmedia - ASM1182E Certification CE, FCC Internal Yes LED indicators Activity, Link

Operating conditions Operating temperature (T-T) 0 - 70 °C Storage temperature (T-T) 0 - 100 °C Operating relative humidity (H-H) 10 - 90 %

Packaging content Manual Yes Drivers included Yes Low-profile bracket Yes

Weight & dimensions Width 18 mm Depth 92.6 mm Height 120 mm Weight 51 g

Packaging data Package width 170 mm Package depth 143 mm Package height 30 mm Package weight 142 g Drivers included Yes Low-profile bracket Yes Manual Yes

Other features Jumbo frames 9000 Chipset Realtek - RTL8111E, Asmedia - ASM1182E Manual Yes Flow control support Yes Full specification and details can be found in the

Dual Port PCI Express (PCIe x4) Gigabit Ethernet Server Adapter Network Card - Intel i350 NIC

Add dual Gigabit Ethernet ports to a client, server or workstation through a PCI Express slot






 



The ST2000SPEXI PCI Express Dual Port Gigabit Network Card lets you add two gigabit Ethernet ports to a desktop computer through a single, four-lane (x4 or higher)PCI Express slot.Each port is fully compatible with IEEE 802.3/u/ab standards, for 10/100/1000 Mbps auto-negotiation.


This 2-port GbE network card is based on the high-performance Intel® I350 chipset, which offers several advanced driver options including IEEE 802.3ad link aggregation / teaming support, enabling you to add additional bandwidth to your system. Support for Jumbo Frames, full-duplex operation and 802.1q VLAN tagging also aid in creating an efficient network configuration.


Also useful for virtualization applications (check your VM software for chipset compatibility) or setting up a dual-homed host configuration, this dual-port network card lets you accommodate several complex network scenarios, to meet your business needs. For added versatility, the controller card is equipped with a standard profile bracket and includes a low-profile/half-height bracket for installation in small form-factor computers.


Backed by a StarTech.com 2-year warranty and free lifetime technical support.





Applications:

Ideal for VM environments with multiple operating systems, requiring shared or dedicated NICs
Provide redundant connectivity to ensure an uninterrupted network connection
Configure a dual-homed proxy or gateway system for an added layer of security
Specially designed for desktop PC clients, servers, and workstations with few PCI Express slots available









Features:

Two 10/100/1000Mbps compatible RJ-45 Ethernet ports
Fully Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE802.3ad (link aggregation) and supports IEEE 802.1Q VLAN tagging
Jumbo Frame support up to 9k bytes
Teaming Support
Supports Checksum Offload (IP, TCP, UDP), Transmit Segmentation Offload (TCP, UDP) and Large send Offload
Wake-on-LAN / Remote Wake-up support
Configured with standard profile bracket, low profile/half-height bracket included
Supports Intel Virtualization Technology (VT-c, VMDq, SR-IOV)
Four-lane (x4) PCI Express compatible with x4, x8 and x16 PCIe slots
Compatible with PCI Express Base Specification 2.1 (backward compatible with 1.0a/1.1)









The StarTech.com Advantage:

Double the network bandwidth to a single system through link aggregation / teaming support
Optimize network traffic with support for advanced features such as Jumbo Frames and VLAN tagging
Maximize your virtualized server networking efficiency with dedicated ports









Ports & interfaces Internal Yes PCI version 2.1 Ethernet LAN (RJ-45) ports 2 Interface Ethernet Host interface PCI Express Connectivity technology Wired

Bandwidth Full duplex Yes Maximum data transfer rate 2000 Mbit/s

Network Chipset Intel - I350-AM2 VLAN tagging Yes Jumbo frames 9000 Ethernet LAN Yes Cabling technology 10/100/1000BaseT(X) Networking standards IEEE 802.1Q,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3u Wake-on-LAN ready Yes Auto MDIX IEEE Yes LAN controller Intel® I350-AM2 Jumbo frames support Yes Full duplex Yes Ethernet LAN data rates 10, 100, 1000 Mbit/s Maximum data transfer rate 2000 Mbit/s

Technical details Product colour Aluminium, Black Wake-on-LAN ready Yes Auto MDIX IEEE Yes Mean time between failures (MTBF) 432400 h Sustainability certificates RoHS

Indication Power LED Yes Link/Act LED Yes LED indicators Activity, Link

Design Product colour Aluminium, Black Chipset Intel - I350-AM2 Certification CE, FCC, REACH Internal Yes Mean time between failure (MTBF) 432400 h LED indicators Activity, Link Component for Server

Operating conditions Operating temperature (T-T) 0 - 50 °C Storage temperature (T-T) -20 - 60 °C Operating relative humidity (H-H) 5 - 85 %

Packaging content Manual Yes Drivers included Yes Low-profile bracket Yes

Weight & dimensions Width 19 mm Depth 67 mm Height 121 mm Weight 80 g

Packaging data Package width 172 mm Package depth 144 mm Package height 29 mm Package weight 165 g Drivers included Yes Low-profile bracket Yes Manual Yes

Other features Jumbo frames 9000 Chipset Intel - I350-AM2 Power LED Yes Manual Yes Link/Act LED Yes Full specification and details can be found in the

Dual Port PCI Express Gigabit Ethernet PCIe Network Card Adapter - PoE/PSE

Add two Power-over-Ethernet Gigabit Ports to a PCI Express-enabled Computer






 



The ST2000PEXPSE Dual Port PoE NIC provides two 10/100/1000 Mbps PoE RJ45 ports that can provide up to 25.5W of power each, combining a network data connection and power on a single cable, for less clutter and convenient installations in remote locations.


This full/low profile Gigabit server adapter supports the IEEE 802.3at (Type 1 and 2) standard for a Power Sourcing Equipment (PSE) device, and can deliver 48V DC power to compliant Powered Devices (PD). This eliminates the need for a separate power source and cable for remote networked devices such as IP cameras, IP phones and wireless access points.


Suitable for any PCI Express-enabled client, server or workstation, this versatile PoE network adapter supports features such as Jumbo Frames, VLAN tagging and Wake on LAN (WOL).


The ST2000PEXPSE PoE NIC is backed by a StarTech.com 2-year warranty and free lifetime technical support.





Product Diagram:



 






Applications:

Provide power to PoE powered devices, where they have no access to a power source
Add 2 Ethernet ports to a workstation or server computer from a single PCIe slot
Connect to 2 separate networks simultaneously
Install dual networking capabilities into a small form factor or other space-constrained computer system
Connecting Power over Ethernet-enabled IP cameras, IP phones or Wireless Access Points









Features:

Dual 10/100/1000 Mbps PoE RJ45 ports
Supports IEEE 802.3at (Type 1, 2) Power over Ethernet standard
Power Sourcing Equipment (PSE) design, provides data and up to 25.5W of power on each port
Built-in SATA and LP4 Molex power connector
Unique surge protection design helps prevent system damage in the event of lightning strikes
Jumbo Frame support
On-chip 48 KB Big Transmit/Receive Buffer Support
Fully Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, and supports IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding and IEEE 802.3x Full Duplex Flow Control
Crossover Detection & Auto-Correction (Auto MDIX)
Includes full and low profile/half-height installation brackets









The StarTech.com Advantage:

Reduces cable clutter and makes it easier to install devices in remote locations that are powered by the the PSE network card, with up to 25.5W of power delivery as well as a solid network link over a single cable connection
Suitable for installation in full profile or small form factor computer cases using the included half-height/low profile bracket, adding two network connection ports using a single PCI Express slot
Provides versatile network connections with support for advanced features such as Jumbo Frames and VLAN tagging, as well as Wake-On-LAN and Auto MDIX









Ports & interfaces Internal Yes Power over Ethernet (PoE) ports 2 Ethernet LAN (RJ-45) ports 2 Interface Ethernet Host interface PCI Express Connectivity technology Wired

Bandwidth Buffer size 48 KB Full duplex Yes Maximum data transfer rate 2000 Mbit/s

Network Chipset Realtek - RTL8111E VLAN tagging Yes Ethernet LAN Yes Cabling technology 10/100/1000BaseT(X) Networking standards IEEE 802.1Q,IEEE 802.1p,IEEE 802.3,IEEE 802.3ab,IEEE 802.3at,IEEE 802.3u,IEEE 802.3x Auto MDIX IEEE Yes LAN controller Realtek RTL8111E Jumbo frames support Yes Full duplex Yes Flow control support Yes Ethernet LAN data rates 10, 100, 1000 Mbit/s Maximum data transfer rate 2000 Mbit/s

Technical details Auto MDIX IEEE Yes Mean time between failures (MTBF) 140981 h Sustainability certificates RoHS

Design Chipset Realtek - RTL8111E Certification CE, FCC, REACH Internal Yes Mean time between failures (MTBF) 140981 h LED indicators Activity, Link, PoE Component for PC

Power Output voltage 48 V

Operating conditions Operating temperature (T-T) 0 - 55 °C Storage temperature (T-T) -20 - 85 °C Operating relative humidity (H-H) 5 - 95 %

Packaging content Manual Yes Drivers included Yes Low-profile bracket Yes

Weight & dimensions Width 19 mm Depth 195 mm Height 68 mm Weight 104 g

Packaging data Package width 231 mm Package depth 165 mm Package height 45 mm Package weight 246 g Drivers included Yes Low-profile bracket Yes Manual Yes

Other features Chipset Realtek - RTL8111E Buffer size 48 KB Manual Yes Flow control support Yes Full specification and details can be found in the

4-Port PCIe Gigabit Network Adapter Card

Add four Gigabit Ethernet ports to a client, server or workstation through one PCI Express slot






 



Now you can add four separate Gigabit network ports to your client, server or workstation through just one PCI Express slot, to provide connectivity to multiple networks without draining your budget.




Reliable connectivity to multiple networks This 4-port network card delivers powerful connectivity for your business, corporate or government office environment, with support for high-performance, 4-channel networking and a maximum throughput of up to 1000Mbps in each direction (2000 Mbps total). The network adapter card features the Realtek RTL8111G chipset, which is designed to deliver the performance and enhanced capabilities you need for reliable network connections to your server or computer.




A versatile and cost-effective solution This versatile quad-port network card is ideal for many business applications requiring upgrades to servers or workstations, adding feature-rich Gigabit networking with four independent ports. Compatible with a broad range of operating systems, this cost-effective PCIe Gigabit NIC is suitable for many SMB and Enterprise applications such as virtualized environments that require multiple NICs (check your VM software for chipset compatibility).

The ST1000SPEX43 is backed by a StarTech.com 2-year hardware warranty and free lifetime technical support.





Product Diagram:

 






Applications:

Provides simultaneous access to multiple networks for desktop PC clients, servers, and workstations that have a limited number of PCI Express slots available
Maximizes the number of RJ45 ports within a system or high-end workstations and servers
Ideal for VM environments with multiple operating systems, requiring shared or dedicated NICs
Provides redundant connectivity to ensure an uninterrupted network connection









Features:

Add four independent Gigabit RJ45 ports to connect to multiple networks for high-bandwidth workstations and servers
Realtek RTL8111G chipset for reliable performance
Supports full-duplex flow control
Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab networks
Supports autonegotiation with next-page capacity
Crossover detection and auto-correction (Auto-MDIX)
Up to 9K jumbo frame support
Support for IEEE 802.1Q VLAN tagging and IEEE 802.1P layer 2 priority encoding
Microsoft NDIS5 checksum offload (IP, TCP, UDP) and large send offload support









Ports & interfaces Internal Yes Ethernet LAN (RJ-45) ports 4 Interface Ethernet Host interface PCI Express Connectivity technology Wired

Bandwidth Full duplex Yes Maximum data transfer rate 2000 Mbit/s

Network Chipset Realtek - RTL8111G Ethernet LAN Yes Cabling technology 10/100/1000BaseT(X) Networking standards IEEE 802.3,IEEE 802.3u,IEEE 802.3ab Wake-on-LAN ready Yes Auto MDIX IEEE No Jumbo frames support Yes Full duplex Yes Flow control support Yes Ethernet LAN data rates 10, 100, 1000 Mbit/s Maximum data transfer rate 2000 Mbit/s

Technical details Wake-on-LAN ready Yes Auto MDIX IEEE No Sustainability certificates CE, RoHS Case colour Yellow

Design Chipset Realtek RT8111G Internal Yes LED indicators Activity, Link

Operating conditions Operating temperature (T-T) 0 - 55 °C Storage temperature (T-T) -40 - 75 °C Operating relative humidity (H-H) 5 - 95 %

Weight & dimensions Width 209 mm Depth 138 mm Height 18 mm Weight 95 g

Packaging data Package width 209 mm Package depth 145 mm Package height 40 mm Package weight 184 g

Logistics data Master (outer) case width 44.6 cm Master (outer) case length 52.1 cm Master (outer) case height 34.4 cm Quantity per master (outer) case 50 pc(s)

Other features Case colour Yellow Chipset Realtek RTL8111G Flow control support Yes Full specification and details can be found in the

PCI Express (PCIe) Gigabit Ethernet Multimode SC Fiber Network Card Adapter NIC - 550m

Connect a PCI Express-based desktop or rackmount PC directly to a Gigabit multimode SC fiber optic network






 



The PEX1000MMSC2 PCIe Gigabit Fiber Network Card lets you connect a desktop PC directly to a fiber optic network, by adding a multimode SC fiber port to your computer or server through an available PCI Express slot.


Perfect for integrating into new or existing fiber infrastructure over great distances, this card delivers full Gigabit bandwidth to your computer up to 550 meters away from your network source, using multimode 50/125 micron duplex SC fiber cable. Plus, for a wider spectrum of compatibility, this versatile card offers fiber integration with a computer up to 220 meters away when deployed to network frameworks consisting of multimode 62.5/125 micron cabling.


With fiber connectivity, your network is not susceptible to electronic interference, which can be problematic with standard RJ45 copper networks, making this fiber card ideal for secure network setups.


Plus, the card is equipped with a standard profile bracket and includes a low-profile/half-height bracket, making it easy to install in small form-factor computers or 1U server and rackmount applications.


Backed by a StarTech.com 2-year warranty and free lifetime technical support.





Card:

 





Jumper:

 






Applications:

Ideal for reliable and secure setups - a direct fiber connection means no electromagnetic interference, which can be a problem with copper-based network cards
Perfect for remote embedded industrial monitoring systems, and high-speed video surveillance
Provide full Gigabit bandwidth to a remote terminal over long distances, extends a network connection further than typical copper cabling









Features:

Maximum fiber distance of 550m
Supports Full/Half-duplex Auto-Negotiation
Includes low-profile/half-height installation bracket
Compliant with IEEE802.3z 1000Base-SX, IEEE 802.1Q VLAN Tagging, IEEE 802.1P Layer 2 Priority Encoding, IEEE 802.3x full duplex flow control
Supports RFC 1157 SNMP v1 for remote management
Jumbo Frame Support
Supports PCI Message Signaled Interrupt (MSI)
Preboot Execution Environment (PXE) 2.1
Supports Wake-on-LAN remote wake-up
Advanced Configuration Power Management Interface (ACPI) 2.0









The StarTech.com Advantage:

Fiber network infrastructure is reliable and secure, with no electromagnetic interference and less data corruption, through a direct fiber-to-desktop connection
Fits into full or low-profile/small form factor (SFF) systems, with a dual profile design









Ports & interfaces Internal Yes Fibre optic connector SC Interface Ethernet / Fiber Host interface PCI Express Connectivity technology Wired

Bandwidth Buffer size 48 KB Full duplex Yes Maximum data transfer rate 2000 Mbit/s

Network Chipset RTL8168E Networking standards IEEE 802.1p,IEEE 802.1Q,IEEE 802.3x,IEEE 802.3z Wake-on-LAN ready Yes Maximum operating distance 550 m LAN controller Realtek RTL8168E Jumbo frames support Yes Full duplex Yes Fiber ethernet cabling technology 1000BASE?SX Maximum data transfer rate 2000 Mbit/s

Technical details Wake-on-LAN ready Yes Sustainability certificates RoHS

Power Power supply 3.2 W

Design Chipset RTL8168E Internal Yes LED indicators Activity, Link Component for PC

Operational conditions Operating temperature (T-T) 0 - 45 °C Storage temperature (T-T) -20 - 70 °C Operating relative humidity (H-H) 5 - 95%

Weight & dimensions Width 118 mm Depth 120 mm Height 18 mm Weight 66 g

Packaging data Package width 171 mm Package depth 218 mm Package height 49 mm Package weight 208 g Manual Yes

Other features Chipset RTL8168E Buffer size 48 KB Power supply 3.2 W Manual Yes Full specification and details can be found in the

PCI Express Gigabit Ethernet Fiber Network Card w/ Open SFP - PCIe SFP Network Card Adapter NIC

Connect a PCI Express-based desktop or rackmount PC directly to a fiber optic network using the Gigabit SFP of your choice






 



The PEX1000SFP2 PCI Express Gigabit Fiber Network Card lets you connect a PCI Express-based computer directly to a fiber optic network using the Gigabit SFP of your choice.


This Gigabit fiber card adapts to your network fiber connection and distance requirements to offer flexible configuration via an open SFP slot, and is compatible with most Fiber Transceivers. With broad SFP compatibility the fiber network card lets you use your preferred SFP, giving you more options to connect your computer directly to a fiber network.


With fiber connectivity, your network is not susceptible to electronic interference, often problematic with standard RJ45 copper networks, making this versatile fiber card ideal for secure network setups.


Plus, the card is equipped with a standard profile bracket and includes a low-profile/half-height bracket, perfect for installation in small form-factor computers or 1U server and rackmount applications.


Backed by a StarTech.com 2-year warranty and free lifetime technical support.





Card:

 





Jumper:

 





Applications:

Ideal for secure setups - a direct fiber connection means no electronic interference, which can be a problem with RJ45 network cards
Perfect for remote embedded industrial monitoring systems, and high-speed video surveillance
Retain full Gigabit network speeds to a remote terminal over longer distances than copper cabling









Features:

Compatible with most Gigabit SFP modules
Supports Full/Half-duplex Auto-Negotiation, Auto-MDI/MDIX
Includes low-profile/half-height installation bracket
Compliant with IEEE802.3z 1000Base-SX/LX, IEEE 802.1Q VLAN Tagging, IEEE 802.1P Layer 2 Priority Encoding IEEE 802.3x full duplex flow control, RFC 1157 SNMP v1
Jumbo Frame Support
Supports PCI Message Signaled Interrupt (MSI)
Preboot Execution Environment (PXE) 2.1









The StarTech.com Advantage:

Adapts to your network configuration using the fiber transceiver of your choice, through an open SFP slot
No electronic interference provides a secure fiber network infrastructure through a direct fiber-to-desktop connection
Fits into full or low-profile/small form factor (SFF) systems, with a dual profile design









Ports & interfaces Internal Yes Fibre ports quantity 1 Fiber optic connector SFP Interface Fiberr Host interface PCI Express Connectivity technology Wired

Bandwidth Maximum data transfer rate 2000 Mbit/s

Network Chipset Realtek RTL8168E, Marvell 88E1111B1 Networking standards IEEE 802.1p,IEEE 802.1Q,IEEE 802.3x,IEEE 802.3z Networking standards IEEE 802.1p, IEEE 802.1Q, IEEE 802.3x, IEEE 802.3z Maximum data transfer rate 2000 Mbit/s

Power Power consumption (typical) 3.2 W

Design Chipset Realtek RTL8168E, Marvell 88E1111B1 Internal Yes LED indicators Activity, Link

Operational conditions Operating temperature (T-T) 0 - 45 °C Storage temperature (T-T) -20 - 70 °C Operating relative humidity (H-H) 20 - 80%

Weight & dimensions Width 18 mm Depth 128 mm Height 118 mm Weight 57 g

Packaging data Package width 171 mm Package depth 217 mm Package height 52 mm Package weight 200 g Manual Yes Quantity 1

Other features Chipset Realtek RTL8168E, Marvell 88E1111B1 Manual Yes Full specification and details can be found in the

1-Port 10G Open SFP+ Network Card - PCIe - Intel Chip - MM/SM

Get advanced connectivity over multimode or single-mode fiber, by adding a 10GBase-LR/SR open SFP+ port to your server or workstation


This fiber network card delivers reliable, high-performance network connectivity, by adding an open SFP+ slot to your server or high-powered workstation. It provides an easy and cost-effective way to upgrade your server or workstation to a 10 Gigabit fiber network using the SFP+ module of your choice and gives you the flexibility to use either multimode or single-mode fiber.






 





Increase your network speed Several factors drive the need for more bandwidth in your network infrastructure. An increase in the number of network users and data-intensive applications, such as multimedia streaming and large file transfers all contribute to the need for more bandwidth in your network infrastructure. This fiber NIC lets you take advantage of the increased speed and stability of a 10 Gigabit network, with data transfers of up to 10Gbps.




Add scalable network connections to your server or workstation The fiber NIC is compatible with most 10GbE SFP+ transceivers. This gives you flexible and scalable configuration options for connecting your computer directly to a fiber network, at greater distances.

The card features an open SFP+ slot with support for one interchangeable 10GBase SFP+ module. This gives you the option to use the fiber transceiver module that best suits your network needs based on distance and connector type. StarTech.com offers a variety of SFP+ transceiver modules including the SFP10GLRST single-mode SFP+ the SFP10GLRMST multi-mode SFP+, and SFP10GSRST multimode LC with DDM.

In addition, StarTech.com SFP+ Cables provide a dependable solution for linking telecom and data communications equipment, such as routers and switches.




Enhance your network capabilities The 10 Gigabit network card features the Intel® 82599 chipset, delivering the power, performance and enhanced capabilities you need for reliable network connections to your server or computer. The Intel chip offers many advanced features including Intel® Virtualization Technology for Connectivity, PXE network boot support and up to 15K jumbo frame support.




Enhance Productivity and Device Management with the StarTech.com Connectivity Tools Application Developed to improve performance and security, StarTech.com Connectivity Tools is the only software suite on the market that works with a wide range of IT connectivity accessories. The software suite includes:



Mac Address Pass-Through Utility: To improve network security.
Wi-Fi Auto Switch Utility: Enabling users to quickly access faster network speeds via wired LAN. 




For more information and to download the StarTech.com Connectivity Tools application, please visit: www.StarTech.com/Connectivity-Tools






www.StarTech.com/Connectivity-Tools




Full specification and details can be found in the

4 Port Gigabit Power over Ethernet PCIe Network Card - PSE / PoE PCI Express NIC

Add 4 Gigabit Power over Ethernet ports to a PCI Express-enabled computer






 



The ST4000PEXPSE 4-Port PoE NIC lets you add four Gigabit Power over Ethernet ports through a single PCI Express slot. Each port can provide up to 25.5W of power, combining network data and power over a single Ethernet cable for reduced cable clutter and added convenience for remote PoE devices.


The PCI express PoE card supports the IEEE 802.3at (Type 1 and 2) standard for Power Sourcing Equipment (PSE), and can deliver up to 48V DC power to compliant Powered Devices (PD). This eliminates the need for a separate power source and data connection for PoE devices such as IP cameras, IP phones or wireless access points.


Suitable for any standard profile PCIe-enabled client, server or workstation, the PoE network card supports features such as Jumbo Frames (up to 9KB), VLAN tagging and Wake on LAN (WoL).


Backed by a StarTech.com 2-year warranty and free lifetime technical support.





Front View:

 





LED Indicators:

 






Applications:

Create a host computer for networked security cameras situated in remote areas, where standard power connection is not possible
Install PoE-powered Wireless Access Points (WAP) or repeaters in industrial, warehousing or business environments
Enable remote installation of touchscreens or information kiosks









Features:

Four 10/100/1000 Mbps compatible PoE RJ45 ports
Fully compliant with IEEE 802.3at (Type 1 & 2) Power over Ethernet standards
Power Sourcing Equipment (PSE) supports up to 48V, 25.5 Watts max. output per port
Built-in SATA and LP4 Molex power connector
Up to 9K Jumbo Frame support
Wake-on-LAN (Remote Wake-up) support
Supports Pair Swap, Polarity and Skew Correction









The StarTech.com Advantage:

Position your network devices where power outlets aren’t available, with 25.5 Watts per-port PoE output
Reduce expenses by using existing standard Cat5 (or better) Ethernet cabling to deliver power and data
Optimize network traffic with support for advanced features, like Jumbo Frames and VLAN tagging









Ports & interfaces Peripheral (Molex) power connectors (4-pin) 1 Number of SATA power connectors 1 Internal Yes Ethernet LAN (RJ-45) ports 4 Interface Ethernet Host interface PCI Express Connectivity technology Wired

Bandwidth Buffer size 48 KB Full duplex Yes Maximum data transfer rate 2000 Mbit/s

Network Chipset RTL811E Jumbo frames 9000 Ethernet LAN Yes Cabling technology 10/100/1000BaseT(X) Networking standards IEEE 802.1p,IEEE 802.1Q,IEEE 802.3,IEEE 802.3ab,IEEE 802.3at,IEEE 802.3az,IEEE 802.3u,IEEE 802.3x Wake-on-LAN ready Yes Auto MDIX IEEE Yes Jumbo frames support Yes Full duplex Yes Ethernet LAN data rates 10, 100, 1000 Mbit/s Maximum data transfer rate 2000 Mbit/s

Technical details Wake-on-LAN ready Yes Auto MDIX IEEE Yes PCI Card form factor Full-height Sustainability certificates RoHS

Design Chipset RTL8111E Certification CE, FCC, REACH, TAA Internal Yes PCI Card form factor Full-height LED indicators Link, PoE

Power Outage voltage 48 V

Operating conditions Operating temperature (T-T) 0 - 55 °C Storage temperature (T-T) -40 - 75 °C Operating relative humidity (H-H) 10 - 90 %

Packaging content Manual Yes Drivers included Yes

Weight & dimensions Width 18 mm Depth 243 mm Height 120 mm Weight 102 g

Packaging data Package width 188 mm Package depth 296 mm Package height 66 mm Package weight 428 g Drivers included Yes Manual Yes

Other features Peripheral (Molex) power connectors (4-pin) 1 Number of SATA power connectors 1 Jumbo frames 9000 Chipset RTL8111E Buffer size 48 KB Manual Yes Full specification and details can be found in the

2-Port 10G Fiber Network Card with Open SFP+ - PCIe, Intel Chip

Add two 10 Gigabit Fiber Ethernet ports (10 Gbps per port) to your server or workstation - using the SFP+ transceiver of your choice


Get fast, high-bandwidth connectivity with this cost-effective fiber network card. It adds two open SFP+ slots to your server or high-powered workstation, giving you an easy way to connect your server or workstation to a 10 Gigabit fiber network using the SFP+ modules of your choice.




Transfer files at faster speeds Large file transfers, multimedia content and increased numbers of network users create constant pressures for more bandwidth in your network infrastructure. This fiber NIC lets you harness the speed and stability of a 10 Gigabit network. The NIC supports data transfers at up to 10Gbps per port, or up to 20Gbps per port in full-duplex mode.




Add scalable network connections to your server or workstation The fiber NIC is compatible with most 10GbE SFP+ transceivers, giving you flexible configuration options to connect your computer directly to a fiber network at greater distances.

The card features two open SFP+ slots with support for interchangeable SFP+ modules, including the StarTech.com 10GBase-SR SFP+ Fiber Transceiver Module (SKU: SFP10GSRST). This gives you the option to use the modules that best suit your network needs based on distance and connector type. StarTech.com SFP+ Cables provide a dependable solution for linking telecom and data communications equipment, such as routers and switches.




Enhance your network capabilities The 10 Gigabit network card features the Intel® 82599 chipset, designed to deliver the power, performance and enhanced capabilities you need for reliable network connections to your server or computer. The Intel chip offers many advanced features including Intel® Virtualization Technology for connectivity, PXE network boot support and up to 15K jumbo frame support.




Enhance Productivity and Device Management with the StarTech.com Connectivity Tools Application Developed to improve performance and security, StarTech.com Connectivity Tools is the only software suite on the market that works with a wide range of IT connectivity accessories. The software suite includes:



Mac Address Pass-Through Utility: To improve network security.
Wi-Fi Auto Switch Utility: Enabling users to quickly access faster network speeds via wired LAN. 




For more information and to download the StarTech.com Connectivity Tools application, please visit: www.StarTech.com/Connectivity-Tools





Product Diagram:

 






Applications:

Add 10Gbps network connectivity to file or application servers and high-performance workstations
Transmit full 10 Gigabit network speeds to a remote terminal over longer distances than copper cabling
Supports secure setups - a direct fiber connection means no electronic interference, which can be a problem with RJ45 network cards
Upgrade your onboard network adapter to 10 Gigabit SFP+, for faster communication
Create a video / audio editing console with 10Gbps access to network storage
Ideal for remote embedded industrial monitoring systems, and high-speed video surveillance









Features:

Add two 10GbE SPF+ slots to server or workstation for fast, high bandwidth connectivity
Intel 82599 chipset with Intel Virtualization Technology for connectivity
Up to 20Gbps (full duplex) bandwidth per port
PXE network boot support
Compliant with IEEE 802.3ae (10GBASE-LR/SR only) and IEEE 802.3aq (10GBASE-LRM)
Compliant with PCI Express Rev 2.0 specification, using PCIe x8 (or higher) slot
Supports IEEE 802.1Q VLAN tagging
Support for 802.3ad Link Aggregation
Up to 15K jumbo frame support
Dual profile (LP bracket included)
Connectivity tools: Provided with this device, the application improves performance and security, featuring MAC Address Changer & Wi-Fi Auto Switch utilities










StarTech.com Connectivity Tools:

 





Ports & interfaces Internal Yes PCI version 2.0 Fiber ports quantity 2 Fiber optic connector SPF+ Interface Fiber Host interface PCI Express Connectivity technology Wired

Bandwidth Maximum data transfer rate 20000 Mbit/s

Network Chipset Intel® 82599 VLAN tagging Yes Jumbo frames 15000 Networking standards IEEE 802.1Q,IEEE 802.3ad,IEEE 802.3ae,IEEE 802.3aq,IEEE 802.3x Jumbo frames support Yes Flow control support Yes Maximum data transfer rate 20000 Mbit/s

Technical details Product colour Black, Metallic Sustainability certificates RoHS

Design Product colour Black, Metallic Chipset Intel® 82599 Certification CE, FCC Internal Yes

Operational conditions Operating temperature (T-T) 5 - 50 °C Storage temperature (T-T) -20 - 60 °C Operating relative humidity (H-H) 20 - 80 %

Packaging content Mounting brackets included Yes Quick installation guide Yes Low-profile bracket Yes

Weight & dimensions Width 18 mm Depth 135 mm Height 120 mm Weight 102 g

Packaging data Package width 143 mm Package depth 170 mm Package height 30 mm Package weight 173 g Mounting brackets included Yes Quick installation guide Yes Low-profile bracket Yes

Other features Jumbo frames 15000 Chipset Intel® 82599 Flow control support Yes Full specification and details can be found in the

4-Port Gigabit Ethernet Network Card - PCI Express, Intel I350 NIC

Add four Gigabit Ethernet ports to a client, server or workstation through a single PCI Express slot



Here’s a dependable and cost-effective way to add four high-performance Gigabit Ethernet ports to your server or desktop computer, through one PCI Express slot.





Product diagram:

 






Reliable network connectivity with high performance This Gigabit Ethernet network card features the Intel® I350-AM4 chipset, designed to deliver the power, performance and enhanced capabilities you need for reliable network connections to your server or computer. The Intel chip provides a number of advanced driver options including IEEE 802.3ad link aggregation / teaming support, which enables you to add additional bandwidth to your system.

Compliant with IEEE 802.3/u/ab standards, the network card provides full support for high-performance, four-channel networking and maximum throughput up to 1000Mbps in each direction (2000 Mbps total) - up to ten times faster than 10/100 Ethernet.




Cost-effective access to multiple networks The quad-port Gigabit network card makes it easy to access multiple networks. It offers a cost-effective solution for IT professionals in government, educational, corporate, health care, or business environments where access to multiple networks from numerous workstations is needed. The server adapter card gives you four redundant, independent Gigabit Ethernet ports and it supports advanced features such as Jumbo Frames and VLAN tagging.




Enhanced versatility and efficiency Compatible with a broad range of operating systems, this versatile PCIe Gigabit NIC is suitable for many business and enterprise applications - including virtualized environments with multiple operating systems, requiring multiple shared or dedicated NICs. The 4-port Gigabit network card is equipped with Intel® Virtualization Technology for Connectivity (Intel® VT-c) which reduces system latency and improves networking throughput. Four dedicated ports allow you to maximize your virtualized server’s networking efficiency and create a more agile data center.

With a dual-profile design, the PCI Express network card installs easily into a wide range of computer/server chassis, regardless of form factor. The card is equipped with a full-sized bracket, and includes a low-profile/half-height installation bracket that you can use as needed.




Enhance Productivity and Device Management with the StarTech.com Connectivity Tools Application Developed to improve performance and security, StarTech.com Connectivity Tools is the only software suite on the market that works with a wide range of IT connectivity accessories. The software suite includes:



Mac Address Pass-Through Utility: To improve network security.
Wi-Fi Auto Switch Utility: Enabling users to quickly access faster network speeds via wired LAN. 




For more information and to download the StarTech.com Connectivity Tools application, please visit: www.StarTech.com/Connectivity-Tools





Product drawing:



 






Applications:

Easy access to multiple networks, ideal for government, education, health care, corporations or other high-endserver applications
Add more network ports to a workstation or server for redundancy or virtualization
Ideal for desktop PC clients, servers and workstations with few PCI Express slots available
An effective replacement Ethernet network card for legacy equipment









Features:

Add four 10/100/1000 RJ-45 Ethernet ports to a client, server or desktop through one PCIe slot
Intel I350-AM4 chipset with Intel Virtualization Technology for connectivity
PXE network boot
Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Auto MDIX support
Autonegotiation support

Wake-on-LAN support
Up to 9K jumbo frame support
IEEE802.3az Energy Efficient Ethernet (EEE)
Supports IEEE 802.1Q VLAN tagging
Full or low-profile (LP bracket included) installation
Full duplex support
Connectivity tools: Provided with this device, the application improves performance and security, featuring MAC Address Changer & Wi-Fi Auto Switch utilities










StarTech.com Connectivity Tools:

 





Ports & interfaces Internal Yes Ethernet LAN (RJ-45) ports 4 Interface Ethernet Host interface PCI Express Connectivity technology Wired

Bandwidth Full duplex Yes Maximum data transfer rate 2000 Mbit/s

Network Chipset Intel® - I350-AM4 VLAN tagging Yes Ethernet LAN Yes Cabling technology 10/100/1000BaseT(X) Networking standards IEEE 802.1Q,IEEE 802.3,IEEE 802.3ab,IEEE 802.3u,IEEE 802.3x Wake-on-LAN ready Yes Auto MDIX IEEE Yes Jumbo frames support Yes Full duplex Yes Maximum data transfer rate 2000 Mbit/s

Technical details Product colour Black, Metallic Wake-on-LAN ready Yes Auto MDIX IEEE Yes Sustainability certificates RoHS

Design Product colour Black, Metallic Chipset Intel® - I350-AM4 Certification CE, FCC Internal Yes LED indicators Activity, Link

Power Power consumption (typical) 4.4 W

Operating conditions Operating temperature (T-T) 5 - 50 °C Storage temperature (T-T) -20 - 60 °C Operating relative humidity (H-H) 20 - 80 %

Packaging content Mounting brackets included Yes Manual Yes Low-profile bracket Yes

Weight & dimensions Width 18 mm Depth 132 mm Height 120 mm Weight 95 g

Packaging data Package width 171 mm Package depth 143 mm Package height 31 mm Package weight 162 g Mouning brackets included Yes Low-profile bracket Yes Manual Yes

Other features Chipset Intel® I350-AM4 Manual Yes Full specification and details can be found in the

1-Port 10G Ethernet Network Card - PCI Express - Intel X550-AT Chip

Upgrade your server or workstation to 10G networking over copper, by adding a 10GBase-T / NBASE-T RJ45 port


Here’s a powerful and cost-effective solution for upgrading your server or workstation to 10 Gigabit Ethernet networking over copper. This PCI Express 10G NIC lets you add an Ethernet port to your server or desktop computer and access your network at multiple speeds: 10G, 5G, 2.5G 1G and 100Mbps.




Reliable, high-performance connectivity This 10G network card utilizes the Intel® X550-AT chipset, delivering the power, performance and enhanced capabilities you need for dependable network connections. Compliant with IEEE 802.3u/ab/an standards, the 1-port 10G card delivers a dependable way to upgrade or replace your existing network port, providing throughput capability of up to 10Gbps in each direction (20Gbps total). It connects easily through a single, four-lane (x4 or higher) PCI Express slot.

The Intel X550-AT chipset provides many advanced features including Intel® Virtualization Technology for connectivity and PXE network boot support. The Intel chipset provides many advanced features to support load-balancing the flow of network traffic, to enhance throughput and provide greater data reliability. It supports Audio-Video Bridging (AVB) to enable tightly controlled media stream synchronization, buffering and resource reservation. It also lets you take advantage of advanced features such as VLAN tagging, up to 15K jumbo frame support and Auto MDIX.




Cost-effective and versatile multimode connectivity This five-speed NIC provides a cost-effective and versatile networking solution, by giving you the additional bandwidth your network needs without having to overhaul your infrastructure wiring. It lets you add an Ethernet port which can be accessed at multiple speeds 10G, 5G, 2.5G 1G and 100Mbps. Compatible with a broad range of operating systems, the 10G NIC is fully compliant with 10GBase-T and NBASE-T™ specifications. (10G network speeds require Cat6a cable. All other speeds require Cat5e cable.)

The PCIe 10G network card features advanced NBASE-T technology, supporting the latest multigigabit equipment, including new Cisco® campus switches and Aruba Networks® access points. The card enables you to connect to NBASE-T based equipment at network speeds of 2.5Gbps or 5Gbps, over your existing Cat5e infrastructure, without having to upgrade to more expensive Cat6a. The Ethernet network card also supports the more common 10G over copper, and 1G network connections using existing Cat 6/Cat5e or better cabling.




Easy installation With its dual-profile design, the network card is easy to install into a wide range of computer/server chassis, regardless of form factor. The card comes equipped with a full-sized bracket, and includes a low-profile/half-height installation bracket that you can use as needed.




Enhance Productivity and Device Management with the StarTech.com Connectivity Tools Application Developed to improve performance and security, StarTech.com Connectivity Tools is the only software suite on the market that works with a wide range of IT connectivity accessories. The software suite includes:



Mac Address Pass-Through Utility: To improve network security.
Wi-Fi Auto Switch Utility: Enabling users to quickly access faster network speeds via wired LAN. 




For more information and to download the StarTech.com Connectivity Tools application, please visit: www.StarTech.com/Connectivity-Tools





Product Diagram:

 






Applications:

Upgrade your server or workstation to provide enhanced performance, advanced features and greater reliability
Upgrade a 10/100/1000 Ethernet port on your computer to 10GbE networking
Ideal for high-demand database servers and mission-critical systems that need redundant network connectivity
Add networking capabilities to an old system with no Ethernet port









Features:

Add a 10G /5G/2.5G/1G/100Mbps R-J45 Ethernet port to provide cost-effective network connectivity for high bandwidth workstations and servers
Compliant with 10GBase-T and NBASE-T specifications
Intel X550-AT chipset with Intel Virtualization Technology for connectivity (Intel VT-c)
Fully compliant with IEEE 802.3an (10GBASE-T), IEEE 802.3ab (1GBASE-T), IEEE 802.3u (100BASE-T)
Up to 20Gbps (full duplex) bandwidth
Up to 9K jumbo frame support
PXE network boot support and Auto MDIX
Connectivity tools: Provided with this device, the application improves performance and security, featuring MAC Address Changer & Wi-Fi Auto Switch utilities









Ports & interfaces Internal Yes PCI version 2.0 Ethernet LAN (RJ-45) ports 1 Interface Ethernet Host interface PCI Express Connectivity technology Wired

Bandwidth Full duplex Yes Maximum data transfer rate 20000 Mbit/s

Network Chipset Intel X550AT VLAN tagging Yes Ethernet interface type 10 Gigabit Ethernet Jumbo frames 9000 Ethernet LAN Yes Networking standards IEEE 802.1Q,IEEE 802.3ab,IEEE 802.3an,IEEE 802.3u,IEEE 802.3x Auto MDIX IEEE Yes Jumbo frames support Yes Full duplex Yes Flow control support Yes Ethernet LAN data rates 10, 100, 1000, 10000 Mbit/s Maximum data transfer rate 20000 Mbit/s

Technical details Auto MDIX IEEE Yes PCI Card form factor Full-height (low-profile) Sustainability certificates RoHS

Design Chipset Intel X550AT Certification CE, FCC, REACH Internal Yes PCI Card form factor Full-height (low-profile) LED indicators Activity, Link Component for PC

Operating conditions Operating temperature (T-T) 5 - 50 °C Storage temperature (T-T) -20 - 60 °C Operating relative humidity (H-H) 20 - 80%

Packaging content Quick installation guide Yes Low-profile bracket Yes

Weight & dimensions Width 68.5 mm Depth 152.5 mm Height 121 mm Weight 96 g

Packaging data Package width 145 cm Package depth 209 cm Package height 121 cm Package weight 200 g Quick installation guide Yes Low-profile bracket Yes

Other features Jumbo frames 9000 Chipset Intel X550AT Flow control support Yes Full specification and details can be found in the

1-Port 40G QSFP+ Network Card - Intel XL710 Open QSFP+ Converged Adapter - PCIe 40 Gigabit Ethernet Server NIC - 40GbE Fiber Optic LAN Card - Dell PowerEdge HPE ProLiant

Converged Fiber NIC Adapter | PCIe | 40Gbps | 1x QSFP+ Slot



Get fast, high-bandwidth connectivity with this QSFP+ server network card. The converged network adapter adds an open QSFP+ slot to your server or workstation. The 40Gb NIC features an Intel controller and provides reliable performance. It’s ideal for high-demand database servers, virtualized servers and agile data centers that require infrastructure updates with no downtime.




Increase Your Network Speed This QSFP+ server NIC lets you take advantage of the speed and stability of a 40 Gigabit Ethernet network, with data transfers of up to 40Gbps.




Add Scalable Network Connections With an open QSFP+ slot, the network interface card supports QSFP+ transceiver modules and is compatible with multimode and single-mode fiber, providing a scalable networking solution.




Enhance Your Network Capabilities The 40Gb NIC uses an Intel XL710 chipset, providing reliable connectivity and convergent network features. It offers many advanced features including Intel Virtualization Technology for Connectivity.




Enhance Productivity and Device Management with the StarTech.com Connectivity Tools Application Developed to improve performance and security, StarTech.com Connectivity Tools is the only software suite on the market that works with a wide range of IT connectivity accessories. The software suite includes:



Mac Address Pass-Through Utility: To improve network security.
Wi-Fi Auto Switch Utility: Enabling users to quickly access faster network speeds via wired LAN. 




For more information and to download the StarTech.com Connectivity Tools application, please visit: www.StarTech.com/Connectivity-Tools





Product Diagram:

 







 






Applications:

Add ultra-fast 40Gbps network connectivity to database, file or application servers and high-performance workstations
Utilize full 40Gpbs network speeds over longer distances than copper cabling
Ideal for agile and high-demand data centers that require data security, no downtime, and infrastructure updates









Features:

40GbE QSFP+ NETWORK CARD: Converged network adapter provides high bandwidth to servers and workstations for demanding applications; SAN and iSCSI offload support
TECH SPECS: 40 Gbps Open QSFP+ Port, MSA Compliant Intel XL710 Chip MMF & SMF Fiber Support PCIe 3.0 x8 PXE Boot 9K Jumbo Frames VLAN Full & low profile 2 Yr Warr
TESTED & VERIFIED PERFORMANCE: We use Spirent SmartBits validation tools to validate performance; Fiber LAN card compatible w/leading servers like Dell PowerEdge HPE ProLiant & Lenovo ThinkSystem
FLEXIBLE: Use any MSA compliant QSFP+ module / direct attach cable (DAC) supporting different fiber types; 40GbE Network Interface Card works w/leading switch, router, & device brands like Cisco & HPE
WIDE OS COMPATIBILITY: 40 Gigabit Ethernet NIC works w/Windows 7, 8, 8.1, 10, 11; Windows Server 2008 R2, 2012, 2012 R2, 2016, 2019; Linux kernels 3.x + (LTS versions)
CONNECTIVITY TOOLS: Provided with this device, the application improves performance and security, featuring MAC Address Changer & Wi-Fi Auto Switch utilities










StarTech.com Connectivity Tools:

 





Ports & interfaces Internal Yes Fiber ports quantity 1 Fiber optic connector QSFP+ Interface Fiber Host interface PCI Express Connectivity technology Wired

Bandwidth Maximum data transfer rate 40000 Mbit/s

Network Chipset Intel® XL710-BM1 VLAN tagging Yes Jumbo frames 9000 Networking standards IEEE 802.1Q,IEEE 802.3ad,IEEE 802.3ba,IEEE 802.3x Jumbo frames support Yes Flow control support Yes Maximum data transfer rate 40000 Mbit/s

Technical details Product colour Black Sustainability certificates RoHS

Design Product colour Black Chipset Intel® XL710-MB1 Certification CE, FCC, REACH Internal Yes LED indicators Yes

Operational conditions Operating temperature (T-T) 0 - 57 °C Storage temperature (T-T) -20 - 85 °C Operating relative humidity (H-H) 5 - 95 %

Weight & dimensions Width 121 mm Depth 181 mm Height 20 mm Weight 112 g

Packaging data Package width 114 mm Package depth 207 mm Package height 38 mm Package weight 242 g Quick start guide Yes Low-profile bracket Yes

Logistics data Master (outer) case width 42 cm Master (outer) case length 44 cm Master (outer) case height 32 cm Quantity per master (outer) case 40 pc(s)

Other features Jumbo frames 9000 Chipset Intel® XL710-BM1 Quick start guide Yes Flow control support Yes

Packaging content Low-profile bracket Yes Quick start guide Yes Full specification and details can be found in the

Dual Port 10G PCIe Network Adapter Card - Intel-X550AT 10GBASE-T & NBASE-T PCI Express Network Interface Adapter 10/5/2.5/1GbE Multi Gigabit Ethernet 5 Speed NIC LAN Card

Add two Ethernet ports to a server or workstation through one PCI Express slot, with support for five network speeds: 10G/5G/2.5G/1G/100Mbps






 



This dual-port network card offers versatile and cost-efficient network connectivity, by increasing the available network bandwidth without having to replace your existing cabling infrastructure. The 5-speed network card lets you add two 10G/NBASE-T RJ45 ports to your server or desktop computer and access your network at multiple speeds: 10G, 5G, 2.5G, 1G, and 100Mbps.






Cost-effective, multimode network connectivity Compatible with a broad range of operating systems, this versatile dual-port NIC is ideal for many business applications that require upgrades to servers or workstations. Fully compliant with 10GBASE-T and NBASE-T™ specifications, the network card is a cost-effective way to enhance your server or computer capabilities by adding two powerful 10-Gigabit Ethernet ports. (10G network speeds require Cat6a cable. All other speeds require Cat5e cable.)




Connect to NBASE-T equipment The network card supports advanced NBASE-T technology, compatible with the latest multi-gigabit Ethernet switches and routers, such as new Cisco campus switches (including Catalyst 4500E, 3850 and 3560-CX). The card enables you to connect to NBASE-T based equipment at network speeds of 2.5Gbps or 5Gbps, over your existing Cat5e infrastructure, without having to upgrade to more expensive Cat6a.

NBASE-T technology accelerates the speed of twisted pair Cat5e copper cabling over a distance of up to 100 meters. The Ethernet network card also supports 10Gbps network speeds if using Cat6a cabling, and 1Gbps network speeds if using Cat5e (or better) cabling.

The Ethernet ports are based on the Intel® X550 chipset, designed to deliver the power, performance, and enhanced capabilities you need for reliable network connections to your server or computer. The network card also supports advanced features including 9K jumbo frames and 802.1q VLAN tagging.




Easy installation With a dual-profile design, the PCI Express network card installs easily into a wide range of computer/server chassis, regardless of form factor. The card comes equipped with a standard-profile bracket for installation in a full-sized chassis and includes a low-profile/half-height bracket for installation in small form-factor computers.

The ST10GPEXNDPI dual-port network card is backed by a StarTech.com 2-year warranty and free lifetime technical support.





Product Diagram:



 






Applications:

Ideal for high-demand database servers and mission-critical systems that need redundant network connectivity
A cost-effective way to add two Ethernet ports to your server or desktop computer, with 5-speed network access
The controller card utilizes advanced NBASE-T technology, enabling multigigabit connections over your existin Cat5e cabling
Supports the latest multigigabit technology switches and routers such as new Cisco campus switches including Catalyst 4500E, 3850 and 3560-CX









Features:

DUAL PORT 10GbE NETWORK INTERFACE CARD: 10Gbps Dual port PCIe Network Adapter Card copper combines high data transfer rates to provide redundancy or independent connections to multiple networks
TECH SPECS: 10 Gbps 2x RJ45 Ports Intel X550AT 10GBASE-T & NBASE-T Muli-Gigabit 1 / 2.5 / 5 / 10 Gbps PCI Express 3.0 x4 15K Jumbo Frames VLAN VT-c PXE Full & low profile 2Yr Warranty
TESTED & VERIFIED PERFORMANCE: We use Spirent SmartBits validation tools to validate performance; compatible with major operating systems
ADVANCED FEATURES: Workstation NIC Supports SAN (Storage Area Network) advanced features including iSCSI offload and Fibre Channel over Ethernet (FCoE)
WIDE OS COMPATIBILITY: Windows 7, 8, 8.1, 10, 11; Windows Server 2008 R2, 2012, 2012 R2, 2016, 2019; Linux kernels 3.x + (LTS versions)









Ports & interfaces Internal Yes PCI version 3.0 Ethernet LAN (RJ-45) ports 2 Interface Ethernet Host interface PCI Express Connectivity technology Wired

Bandwidth Full duplex Yes Maximum data transfer rate 10000 Mbit/s

Network Chipset Intel X550AT VLAN tagging Yes Jumbo frames 9000 iSCSI support Yes Ethernet LAN Yes Cabling technology 10GBase-T Networking standards IEEE 802.1Q,IEEE 802.3ab,IEEE 802.3an,IEEE 802.3u,IEEE 802.3x Auto MDIX IEEE Yes Jumbo frames support Yes Full duplex Yes Flow control support Yes Ethernet LAN data rates 10, 100, 1000, 2500, 5000, 10000 Mbit/s Maximum data transfer rate 10000 Mbit/s

Technical details Product colour Black Auto MDIX IEEE Yes Sustainability certificates RoHS

Design Product colour Black Chipset Intel X550AT Certification CE, FCC, REACH Internal Yes LED indicators Activity, Link, Speed

Operating conditions Operating temperature (T-T) 5 - 50 °C Storage temperature (T-T) -20 - 60 °C Operating relative humidity (H-H) 20 - 80 %

Packaging content Low-profile bracket Yes Quick start guide Yes

Weight & dimensions Width 15 mm Depth 228 mm Height 132 mm Weight 98 g

Packaging data Package width 221 mm Package depth 286 mm Package height 116 mm Package weight 199 g Low-profile bracket Yes Quick start guide Yes

Other features Jumbo frames 9000 Chipset Intel X550AT Quick start guide Yes Flow control support Yes Full specification and details can be found in the

2-Port PCI Express 10GBase-T Ethernet Network Card - with Intel X540 Chip

Add two 10 Gigabit Ethernet ports (10Gbps) to a client, server or workstation through one PCI Express slot



Now, you can add 10 GbE networking, while minimizing your deployment costs. This 10Gbase-T network card (NIC) lets you add two RJ45 ports through a single PCI Express slot, to deliver reliable high-speed network connections to your workstations and servers without draining your budget.






Versatile and cost effective Compatible with a broad range of operating systems, this versatile dual-port NIC is ideal for many business applications that require upgrades to servers or workstations. It’s a cost-effective way to enhance your server or computer capabilities by adding two powerful 10-Gigabit Ethernet ports, with support for advanced features such as VLAN tagging, jumbo frames, and Auto-MDIX.




Reliable, high-performance connectivity This 2-port PCI Express 10GBase-T network card features the Intel® X540 chipset, designed to deliver the power, performance and enhanced capabilities you need for reliable network connections to your server or computer. The X540 chipset provides many advanced features including Intel® Virtualization Technology for connectivity and PXE network boot support.

Compliant with IEEE 802.3/u/ab standards, the network card delivers a dependable way to upgrade or replace your existing network ports with dual 100/1000/10G compatible RJ45 ports, providing throughput capability of up 10Gbps in each direction (20Gbps total). It connects through a single, four-lane (x8 or higher) PCI Express slot.




Easy installation With a dual-profile design, the PCI Express network card installs easily into a wide range of computer/server chassis, regardless of form factor. The card comes equipped for installation in a full-sized chassis, and includes a low-profile/half-height installation bracket that you can use as needed.




Enhance Productivity and Device Management with the StarTech.com Connectivity Tools Application Developed to improve performance and security, StarTech.com Connectivity Tools is the only software suite on the market that works with a wide range of IT connectivity accessories. The software suite includes:



Mac Address Pass-Through Utility: To improve network security.
Wi-Fi Auto Switch Utility: Enabling users to quickly access faster network speeds via wired LAN. 




For more information and to download the StarTech.com Connectivity Tools application, please visit: www.StarTech.com/Connectivity-Tools





Product Diagram:

 






Applications:

Upgrades to servers or workstations in need of enhanced performance, advanced features and greater reliability
Upgrade a 10/100/1000 Ethernet port on your computer to 10GbE networking
Ideal for high-demand database servers and mission-critical systems that need redundant network connectivity
Add networking capabilities to an old system with no Ethernet port









Features:

Add two 100/1000/10Gbase-T RJ45 ports, providing cost-effective network connectivity for high bandwidth workstations and servers
Intel X540 chipset with Intel Virtualization Technology for Connectivity
Up to 20Gbps (full duplex) bandwidth per port
Compliant with PCI Express Rev2.0 specification, using PCIe x8 (or higher) slot
PXE network boot support
Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Support for 802.3ad Link Aggregation
Auto-MDIX support
Autonegotiation support
Up to 15K jumbo frame support
IEEE802.3az Energy Efficient Ethernet (EEE)
Supports IEEE 802.1Q VLAN tagging
Full or low-profile (LP bracket included) installation
Connectivity tools: Provided with this device, the application improves performance and security, featuring MAC Address Changer & Wi-Fi Auto Switch utilities










StarTech.com Connectivity Tools:

 





Ports & interfaces Internal Yes Ethernet LAN (RJ-45) ports 2 Interface Ethernet Host interface PCI Express Connectivity technology Wired

Bandwidth Full duplex Yes Maximum data transfer rate 20000 Mbit/s

Network Chipset Intel - X540 VLAN tagging Yes Jumbo frames 15000 Ethernet LAN Yes Cabling technology 10/100/1000BaseT(X) Networking standards IEEE 802.3ad,IEEE 802.3q,IEEE 802.3u,IEEE 802.3an,IEEE 802.3az,IEEE 802.3ab Wake-on-LAN ready Yes Auto MDIX IEEE No Jumbo frames support Yes Full duplex Yes Ethernet LAN data rates 10, 1000, 100 Mbit/s Maximum data transfer rate 20000 Mbit/s Auto-negotiation Yes

Technical details Product colour Black, Stainless steel Wake-on-LAN ready Yes Auto MDIX IEEE No

Design Product colour Black, stainless steel Chipset Intel - X540 Internal Yes LED indicators Activity, Speed

Operating conditions Operating temperature (T-T) 5 - 50 °C Storage temperature (T-T) -20 - 60 °C Operating relative humidity (H-H) 20 - 80 %

Packaging content Manual Yes Low-profile bracket Yes

Weight & dimensions Width 20 mm Depth 163 mm Height 120 mm Weight 160 g

Packaging data Package width 208 mm Package depth 147 mm Package height 40 mm Package weight 242 g Low-profile bracket Yes Manual Yes

Other features Chipset Intel - X540 Manual Yes Jumbo frames 15000 Full specification and details can be found in the

1-Port 10G SFP+ Fiber Optic Network Card - PCIe - Intel Chip - MM

Get high performance connectivity over multi-mode fiber, by upgrading your server or workstation with a 10GBase-SR port






 



This fiber optic network card delivers reliable, high-performance network connectivity, providing an easy and cost-effective way to upgrade your server or workstation to 10 Gigabit networking over multimode fiber. The 10G network card comes with an installed multimode SFP+ transceiver with up to 330 m range, to get you up and running quickly.




Take advantage of faster network speeds Increasing numbers of network users and data-intensive applications, such as multimedia streaming and large file transfers, all drive the need to increase the bandwidth capability of your network infrastructure. This fiber NIC lets you take advantage of the increased speed and stability of a 10 Gigabit network, with data transfers of up to 10Gbps and up to 20Gbps (full duplex) bandwidth.




Includes an SFP+ transceiver, built for reliable performance For added convenience, this single-port 10G network card comes with an installed multimode SFP+ transceiver. Built to ensure reliable performance, the 10 GbE SFP+ is manufactured by StarTech.com to meet or exceed OEM specifications and comply with the industry’s MSA (Multi-Source Agreement) standards. The 10GBase-SR SFP+ delivers 10 Gigabit connectivity over multimode fiber cable with a range of up to 330 m (1082 ft).




Enhance your network capabilities and reliability The 10 Gigabit network card features the Intel® 82599 chipset, delivering the power, performance and enhanced capabilities you need for reliable network connections to your server or computer. The Intel chip offers many advanced features including Intel® Virtualization Technology for Connectivity, PXE network boot support and up to 15K jumbo frame support.

The 10G NIC connects easily through an available PCI Express expansion slot, and is compliant with PCIe Rev. 2 x 8 (or higher). The network card comes with a standard profile, and also includes a low-profile bracket, for versatile installation.

The PEX10000SRI is backed by a StarTech.com 2-year warranty and free lifetime technical support.





Applications:

Connect servers and workstations at 10Gbps over multimode fiber
Supports secure setups - a direct fiber connection means no electronic interference, which can be a problem with RJ45 network cards
Ensure reliable network performance with the pre-installed multimode SFP+ transceiver, with a range of up to 330 m (1082 ft.)
Create a video / audio editing console with 10Gbps access to network storage









Features:

Upgrade your server or workstation to 10G Ethernet for fast, high-bandwidth connectivity over multimode fiber
Single-port 10G network card with installed multimode SFP+ transceiver (up to 330 m range)
Intel 82599 chipset with Intel Virtualization Technology for Connectivity
Compliant with IEEE 802.3ae (10GBASE-SR)
Supports PXE network boot support, VLAN tagging, link aggregation
Up to 15K jumbo frame support
Up to 20Gbps (full duplex) bandwidth









Ports & interfaces Internal Yes Fiber ports quantity 1 Fiber optic connector SFP+ Interface Fiber Host interface PCI Express Connectivity technology Wired

Bandwidth Full duplex Yes Maximum data transfer rate 20000 Mbit/s

Network Chipset Intel® 82599 VLAN tagging Yes Jumbo frames 15000 Networking standards IEEE 802.1Q,IEEE 802.3ad,IEEE 802.3ae,IEEE 802.3x Jumbo frames support Yes Full duplex Yes Flow control support Yes Maximum data transfer rate 20000 Mbit/s

Technical details Product colour Black Sustainability certificates RoHS

Design Product colour Black Chipset Intel® 82599 Certification CE, FCC, REACH Internal Yes Component for PC

Operational conditions Operating temperature (T-T) 5 - 50 °C Storage temperature (T-T) -20 - 60 °C Operating relatice humidity (H-H) 20 - 80%

Packaging content Mounting brackets included Yes Quick installation guide Yes Low-profile bracket Yes

Weight & dimensions Width 18 mm Depth 135 mm Height 120 mm Weight 116 g

Packaging data Mounting brackets included Yes Quick installation guide Yes Low-profile bracket Yes Package width 143 mm Package depth 170 mm Package height 30 mm Package weight 194 g

Other features Jumbo frames 15000 Chipset Intel® 82599 Flow control support Yes Full specification and details can be found in the

Quad Port 10G SFP+ Network Card - Intel XL710 Open SFP+ Converged Adapter - PCIe 10 Gigabit Ethernet Server NIC - 10GbE Fiber Optic LAN Card - Dell PowerEdge HPE ProLiant

Add four 10 Gigabit fiber Ethernet ports to your server or workstation, using the SFP+ transceiver of your choice


This SFP+ server network card delivers reliable, high-performance network connectivity, by adding four open SFP+ slots to your server or high-powered workstation. It provides an easy and cost-effective way to upgrade to a 10 Gigabit fiber network using SFP+ modules of your choice and gives you the flexibility to use either multimode or single-mode fiber.




Add redundant connections in zero-downtime environments With multiple available ports, you can avoid network downtime by adding fault-tolerant connections using two or more modules to provide high-bandwidth network links to your mission-critical servers or workstations.




Increase your network speed This PCIe network card lets you take advantage of the increased speed and stability of a 10 Gigabit network, with data transfers of up to 10Gbps.




Add scalable network connections to your server or workstation The network interface card is compatible with most 10GbE SFP+ transceivers. This gives you flexible and scalable configuration options, for connecting your computer directly to a fiber network at greater distances.

The card features four open SFP+ slots with support for interchangeable 10GBase SFP+ modules. This gives you the option to use the fiber transceiver modules that best suit your network needs based on distance and connector type. StarTech.com offers a wide variety of SFP modules to suit your network requirements. In addition, StarTech.com SFP cables provide a dependable solution for linking telecom and data communications equipment, such as routers and switches.




Enhance your network capabilities The SFP+ server network card features the Intel® XL710 chipset, delivering the power, performance and enhanced capabilities you need for reliable connections to your server or computer. The Intel chip offers many advanced features including Intel® Virtualization Technology for Connectivity, PXE network boot support and up to 9K jumbo frame support.




Enhance Productivity and Device Management with the StarTech.com Connectivity Tools Application Developed to improve performance and security, StarTech.com Connectivity Tools is the only software suite on the market that works with a wide range of IT connectivity accessories. The software suite includes:



Mac Address Pass-Through Utility: To improve network security.
Wi-Fi Auto Switch Utility: Enabling users to quickly access faster network speeds via wired LAN. 




For more information and to download the StarTech.com Connectivity Tools application, please visit: www.StarTech.com/Connectivity-Tools




Product Diagram:

 






Applications:

Add 10Gbps network connectivity to database, file or application servers and high-performance workstations
Transmit full 10 Gigabit network speeds to a remote terminal over longer distances than copper cabling
Supports secure setups - a direct fiber connection means no electronic interference, which can be a problem with RJ45 network cards
Upgrade your onboard network adapter to 10 Gigabit SFP+, for faster communication
Create a video/audio editing console with 10Gbps access to network storage
Ideal for remote embedded industrial monitoring systems, and high-speed video surveillance









Features:

QUAD SFP+ ADAPTER: 4 ports on SFP+ network card can provide redundancy, or be aggregated for demanding applications; Data Center Bridging (DCB), virtualization incl. VT-c, SAN & iSCSI offload support
TECH SPECS: 10 Gbps per port 4 SFP+ Ports, MSA Compliant Intel XL710 MMF & SMF Fiber Support PCIe 3.0 x8 PXE Boot 9K Jumbo Frames Link Aggregation VLAN Full profile 2 Yr. Warranty
TESTED & VERIFIED PERFORMANCE: We use Spirent SmartBits to validate performance; converged network adapter is compatible w/ leading servers like Dell PowerEdge, HPE ProLiant & Lenovo ThinkSystem
FLEXIBLE: Use MSA compliant SFP+ module or direct attach cable (DAC) supporting different fiber types; 10 Gigabit Ethernet NIC works w/leading brands of switches, routers, & devices like Cisco & HPEM
WIDE HYPERVISOR & OS COMPATIBILITY: Fiber LAN card compatible w/Windows 7, 8, 8.1, 10, 11; Windows Server 2008 R2, 2012, 2012 R2, 2016, 2019; Linux kernels 3.x + (LTS versions)
CONNECTIVITY TOOLS: Provided with this device, the application improves performance and security, featuring MAC Address Changer & Wi-Fi Auto Switch utilities









StarTech.com Connectivity Tools:

 





Ports & interfaces Internal Yes PCI version 3.0 Fiber ports quantity 4 Fiber optic connector SPF+ Interface Fiber Host interface PCI Express Connectivity technology Wired

Bandwidth Full duplex Yes Maximum data transfer rate 20000 Mbit/s

Network Chipset Intel® XL710 VLAN tagging Yes Jumbo frames 9000 Networking standards IEEE 802.1Q,IEEE 802.1ad,IEEE 802.3ae,IEEE 802.3x Jumbo frames support Yes Full duplex Yes Flow control support Yes Maximum data transfer rate 20000 Mbit/s

Technical details Product colour Black Sustainability certificates RoHS

Design Product colour Black Chipset Intel® XL710 Certification CE, FCC, REACH Internal Yes LED indicators Activity, Link

Operational conditions Operating temperature (T-T) 5 - 50 °C Storage temperature (T-T) -20 - 60 °C Operating relative humidity (H-H) 20 - 80 %

Weight & dimensions Width 15 mm Depth 139 mm Height 100 mm Weight 122 g

Packaging data Package width 142 mm Package depth 170 mm Package height 30 mm Package weight 182 g Quick start guide Yes

Logistics data Master (outer) case width 30.5 cm Master (outer) case length 58 cm Master (outer) case height 36 cm Quantity per master (outer) case 80 pc(s)

Other features Jumbo frames 9000 Chipset Intel® XL710 Quick start guide Yes Flow control support Yes Full specification and details can be found in the

Dual Port 40G QSFP+ Network Card - Intel XL710 Open QSFP+ Converged Adapter - PCIe 40 Gigabit Ethernet Server NIC - 40GbE Fiber Optic LAN Card - Dell PowerEdge HPE ProLiant

Add two high-bandwidth 40 Gigabit fiber Ethernet ports to your server or workstation, using the QSFP+ transceiver of your choice


Get fast, high-bandwidth connectivity with this dual-port QSFP+ Network Interface Card. It adds two open QSFP+ slots to your server or workstation. The 40G NIC features an Intel® controller and provides redundant network links with reliable performance. It’s ideal for high-demand database servers, virtualized servers and agile data centers that require infrastructure updates with no downtime.




Increase your network speed This dual port QSFP+ server NIC card lets you take advantage of the speed and stability of a 40 Gigabit network, with data transfers of up to 40Gbps.




Add redundant connections in zero-downtime environments With two QSFP+ ports, the PCIe NIC helps to prevent network downtime by adding fault-tolerant connections using two modules, to provide high-bandwidth network links to your mission-critical servers or workstations.




Add scalable network connections With its open QSFP+ slots, the network interface card supports QSFP+ transceiver modules and is compatible with multimode and single-mode fiber, providing a scalable networking solution.




Enhance your network capabilities The 40G NIC uses an Intel XL710 chipset providing reliable connectivity and convergent network features. It offers many advanced features including Intel Virtualization Technology for Connectivity.




Enhance Productivity and Device Management with the StarTech.com Connectivity Tools Application Developed to improve performance and security, StarTech.com Connectivity Tools is the only software suite on the market that works with a wide range of IT connectivity accessories. The software suite includes:



Mac Address Pass-Through Utility: To improve network security.
Wi-Fi Auto Switch Utility: Enabling users to quickly access faster network speeds via wired LAN. 




For more information and to download the StarTech.com Connectivity Tools application, please visit: www.StarTech.com/Connectivity-Tools





Product Diagram:

 







 






Applications:

Add ultra-fast 40Gbps network connectivity to database, file or application servers and high-performance workstations
Transmit full 40Gpbs network speeds to a remote terminal over longer distance than copper cabling
Ideal for agile and high-demand data centers that require data security, no downtime, and infrastructure updates
Supports secure setups - a direct fiber connection means no electronic interference, which can be a problem with RJ45 network cards
Create a video/audio editing console with 40Gbps access to network storage
Ideal for remote embedded industrial monitoring system, and high-speed video surveillance









Features:

DUAL QSFP+ NETWORK CARD: Two port 40GbE converged network adapter for redundancy or can be aggregated for demanding applications; Data Center Bridging (DCB), virtualization & iSCSI offload support
TECH SPECS: 2x 40 Gbps Open QSFP+ Ports MSA Compliant Intel XL710 Chip MMF & SMF Fiber Support PCIe 3.0 x8 PXE Boot 9K Jumbo Frames VLAN Full & low profile 2 Yr. Warranty
TESTED & VERIFIED PERFORMANCE: We use Spirent SmartBits to validate performance of this 40 Gigabit Ethernet Card; compatible w/ leading servers like Dell PowerEdge, HPE ProLiant & Lenovo ThinkSystem
FLEXIBLE: Use MSA compliant QSFP+ or direct attach cable (DAC) supporting different fiber types w/this 40GbE PCI Express NIC; works w/ leading brands of switches, routers, & devices like Cisco & HPE
WIDE OS COMPATIBILITY: Network Interface Card works w/ Windows 7, 8, 8.1, 10, 11; Windows Server 2008 R2, 2012, 2012 R2, 2016, 2019; Linux kernels 3.x + (LTS versions)
CONNECTIVITY TOOLS: Provided with this device, the application improves performance and security, featuring MAC Address Changer & Wi-Fi Auto Switch utilities










StarTech.com Connectivity Tools:

 





Ports & interfaces Internal Yes PCI version 3.0 Fiber ports quantity 2 Fiber optic connector QSPF+ Interface Fiber Host interface PCI Express Connectivity technology Wired

Bandwidth Full duplex Yes Maximum data transfer rate 40000 Mbit/s

Network Chipset Intel - XL710-BM2 VLAN tagging Yes Jumbo frames 9000 Ethernet LAN No Networking standards IEEE 802.1Q,IEEE 802.3ad,IEEE 802.3ba,IEEE 802.3x Jumbo frames support Yes Full duplex Yes Flow control support Yes Fiber ethernet cabling technology 40GBASE-LR4,40GBASE-SR4 Maximum data transfer rate 40000 Mbit/s

Technical details Product colour Black Sustainability certificates RoHS

Design Product colour Black Chipset Intel - XL710-BM2 Certification CE, FCC, REACH Internal Yes LED indicators Activity, Link

Operational conditions Operating temperature (T-T) 0 - 57 °C Storage temperature (T-T) -20 - 85 °C Operating relative humidity (H-H) 5 - 95 %

Weight & dimensions Width 121 mm Depth 181 mm Height 21 mm Weight 127 g

Packaging data Package width 145 mm Package depth 207 mm Package height 40 mm Package weight 212 g Quick start guide Yes Low-profile bracket Yes

Logistics data Master (outer) case width 42 cm Master (outer) case length 44 cm Master (outer) case height 32 cm Quantity per master (outer) case 40 pc(s)

Other features Jumbo frames 9000 Chipset Intel - XL710-BM2 Quick start guide Yes Flow control support Yes

Packaging content Low-profile bracket Yes Quick start guide Yes Full specification and details can be found in the