Lindy SATA Systems

Overview The Lindy SATA Cable is a high quality item which features two 7 Pin Data connectors that provide a durable connection to SATA equipment. The cable is constructed using shielded twin-ax conductors with multiple ground connections and made with high quality materials for maximum performance.

Product Details Serial ATA (SATA) 7 Pin to Serial ATA (SATA) 7 Pin


Connects your motherboard to a HDD, SSD or Optical Drive


Compatible with SATA III and backwards compatible with SATA I and II


colour: Red


10 Year Warranty

Overview The LINDY SATA Cable is a high quality item which features two 7 Pin Data connectors that provide a durable connection to SATA equipment.

The cable is constructed using shielded twin-ax conductors with multiple ground connections and made with high quality materials for maximum performance.

Product Details Serial ATA (SATA) 7 Pin to Right-angled (90°) (SATA) 7 Pin


Connects your motherboard to a HDD, SSD or Optical Drive


Compatible with SATA III and backwards compatible with SATA I and II


colour: Red


10 Year Warranty

Product Details 2 x 15 Way SATA Male


1 x 6 way PCIe Male


10 year warranty

Overview The Lindy SATA Cable is a high quality item which features two 7 Pin Data connectors that provide a durable connection to SATA equipment. The cable is constructed using shielded twin-ax conductors with multiple ground connections and made with high quality materials for maximum performance.

Product Details Serial ATA (SATA) 7 Pin to Serial ATA (SATA) 7 Pin


Connects your motherboard to a HDD, SSD or Optical Drive


Compatible with SATA III and backwards compatible with SATA I and II


colour: Red


10 Year Warranty

Overview The Lindy SATA Cable is a high quality item which features two 7 Pin Data connectors that provide a durable connection to SATA equipment.

The cable is constructed using shielded twin-ax conductors with multiple ground connections and made with high quality materials for maximum performance

Product Details Serial ATA (SATA) 7 Pin to Right-angled (90°) (SATA) 7 Pin


Connects your motherboard to a HDD, SSD or Optical Drive


Compatible with SATA III and backwards compatible with SATA I and II


colour: Red


10 Year Warranty

Overview The Lindy SATA Cable is a high quality item which features two 7 Pin Data connectors that provide a durable connection to SATA equipment.

The cable is constructed using shielded twin-ax conductors with multiple ground connections and made with high quality materials for maximum performance

Product Details Serial ATA (SATA) 7 Pin to Right-angled (90°) (SATA) 7 Pin


Connects your motherboard to a HDD, SSD or Optical Drive


Compatible with SATA III and backwards compatible with SATA I and II


colour: Red


10 Year Warranty

Overview The LINDY SATA Cable is a high quality item which features two 7 Pin Data connectors that provide a durable connection to SATA equipment. The cable is constructed using shielded twin-ax conductors with multiple ground connections and made with high quality materials for maximum performance.

Product Details Serial ATA (SATA) 7 Pin to Serial ATA (SATA) 7 Pin


Connects your motherboard to a HDD, SSD or Optical Drive


Compatible with SATA III and backwards compatible with SATA I and II


Operating Temperature: approx. -20 to 65°C


Storage Temperature: approx. -20 to 65°C


colour: Red


10 Year Warranty

Overview This simple adapter cable allows you to connect a hard disk or CD/DVD-ROM drive, equipped with a standard LP4 Molex type power connector, to a computer's SATA power supply. Ideal for adding older devices to a newer SATA equipped computer.

Contains 1x 0.15m SATA Power Connector to LP4 Power Cable


Product Details Adapts a SATA connector for use with standard Molex devices


15 Way SATA Male to LP4 Molex Female


Colour coded cables


10 Year Warranty

Product Details

Serial ATA 7 Pin to Serial ATA 7 Pin
SATA III - backwards compatible with SATA I and SATA II
Colour: Red

Product Details SATA III - backwards compatible with SATA I and SATA II


Features latch type SATA plugs which lock into place when used with compatible latching controller or device ports


Can also be used with standard non-latching SATA ports

This simple adapter allows you to connect a hard disk or CD/DVD-ROM drive, equipped with a Micro SATA Data + Power adapter connector, to a computer's SATA port. May also be used with external docking stations. This new design will operate with devices requiring 5V DC and in addition incoporates a voltage regulator for those devices that require 3.3 Volts.

Product Details

Adapts a SATA connector for use with Micro SATA devices
Incoporates a 5V DC to 3.3V DC Voltage regulator
7 Pin Data + 15 Pin Power (SATA port) to 7 Pin Data + 9 Pin Power (Device) connectors
Suitable for use with devices requiring 3.3V DC or 5V DC
2 Year Warranty
Please Note: Supports Micro SATA drives with power consumption up to 3.3V 0.8A

Product Details SATA III - backwards compatible with SATA I and SATA II


Features latch type, low profile SATA plugs which lock into place when used with compatible latching controller or device ports


Can also be used with standard non-latching SATA ports


10 year warranty

Overview This simple adapter allows you to connect a hard disk or CD/DVD-ROM drive, equipped with a standard LP4 Molex type power connector, to a computer's SATA power supply. Ideal for adding older devices to a newer SATA equipped computer.

Product Details Adapts a SATA connector for use with standard Molex devices


15 Way SATA Male to LP4 Molex Female


10 Year warranty

Product Details Adapter for mSATA SSDs for installation in a 2.5 "SATA adapter frame


Fits in to standard 2.5" drive slots/enclosures


Can be used with or without the supplied 2.5" frame


8 mounting positions for supplied screws

Overview This simple adapter allows you to connect a hard disk or CD/DVD-ROM drive, equipped with a Micro SATA Data + Power adapter connector, to a computer's SATA port. May also be used with external docking stations.

Product Details Adapts a SATA connector for use with Micro SATA devices


7 Pin Data + 15 Pin Power (SATA port) to 7 Pin Data + 9 Pin Power (Device) connectors


Suitable for use with devices requiring 5V DC


10 year warranty

Product Details For use with SAS/SATA HBAs (Host Board Adapters) and external drive housings


Latch type SFF-8088 (4x) to latch type SFF-8088 (4x) connectors


SAS (Serial Attached SCSI) compliant


Fully compliant with SATA II specifications (Electrical Specifications, section 6.6)


Full duplex communication up to 3Gb each direction/channel


colour: Black


10 Year warranty

Overview The Lindy ODD Caddy for 2.5" SATA HDD allows you to install a second internal hard drive in your notebook using the optical drive bay. This in turn can be used to add extra storage or additional dual boot capabilities to you computer.

Fully integrates into your laptop or notebook, no cables, external power supplies or software drivers required


Stainless steel & black plastic finish


Product Details Replaces the optical drive in your laptop


Allows you to add extra hard drive storage (hard drive is not included)


Designed for use with 2.5" SATA hard drives up to 12.7 mm high


SATA ODD Slim SATA 13 Pin connector to SATA HDD 22 Way connector


dimensions: 128 x 129 x 12.7mm (WxDxH); fits most standard optical drive bays


Note: This caddy does not support 3.3V HDDs/SSDs and is designed to fit most 'standard' and 'universal' CD/DVD/Optical drive bays. Due to variations in laptop design, compatibility with all machines can not be guaranteed.

USB 3.0 SATA Enclosure 2.5"

Key Features:



Enclosure with tool-less design
USB 3.0 / USB 3.1 Gen 1 SuperSpeed interface (5Gbps)
Supports 2.5” HDDs and SSDs up to 9.5mm in height
Supports SATA up to 6Gbps
2 year warranty


The Lindy USB 3.0 SATA Enclosure 2.5" turns a normal 2.5” SATA hard drive or solid state drive into a portable, external hard drive. It is a fast storage solution which supports data transfer rates up to 5Gbps via USB 3.0 and up to 6Gbps via SATA.

 The enclosure allows the user to quickly add an additional 2.5" SATA HDD/SSD to a computer without opening the case. Compact and lightweight, the enclosure is highly portable, ideal for mobile applications or temporary desktop backup & storage. It has a tool free design, for easy drive installation. The enclosure is bus-powered so requires no external power supply.

Information about USB 3.0, 3.1 & 3.2



USB 3.0, USB 3.1 and USB 3.2 PCs, cables and devices are all compatible with each other, when using either a USB Type A or USB Type C host interface.
USB 3.0, USB 3.1 Gen 1 and USB 3.2 Gen 1 all support data transfer rates up to 5 Gbps. 
USB 3.1 Gen 2 and USB 3.2 Gen 2 both support data transfer rates up to 10 Gbps. 


Specifications:



Interface: USB to SATA
Interface Standard: USB 3.1 Gen 1 / 3.0, SATA 3.0
Supported Bandwidth: 5 Gbps, 6Gbps
Chipset: JMS567
Compatibility: USB Type A equipped computers
Special Features: Screwless design
Inputs: 1 x USB Type Micro-B (Female)
Outputs: 1 x SATA 22 Pin (Male)
Power: Bus-powered
Dimensions WxDxH: 130x82x14mm (5.12x3.23x0.55in)
Cable Length: 30cm (1.18in)
Housing Material: Plastic
Net Weight: 0.067kg (0.15lb)
Operating Temperature: 5°C - 35°C (41°F - 95°F)
Storage Temperature: -20°C - 50°C (-4°F - 122°F)
Humidity: 20 - 80% RH (non-condensing)
Colour: Black
Packaging Type: Carton Box
Packaging Dimensions: 150x100x30mm (5.91x3.94x1.18in)
Gross Weight: 0.14kg (0.3lb)
Warranty (Years): 2
Certified: CE, UKCA, FCC, RoHS & REACH, CP65


Package contents:



USB 3.0 SATA Enclosure 2.5"   
0.30m USB 3.0 A Male to Micro B cable
Lindy Manual


Datasheets / User Manuals / Quick Start Guides/ Charts can be downloaded from our Documentation tab (above)

Product Details For use with SAS/SATA HBAs (Host Board Adapters) and external drive housings


Latch type SFF-8088 (4x) to latch type SFF-8088 (4x) connectors


SAS (Serial Attached SCSI) compliant


Fully compliant with SATA II specifications (Electrical Specifications, section 6.6)


Full duplex communication up to 3Gb each direction/channel


colour: Black


10 Year warranty

Product Details For use with SAS/SATA HBAs (Host Board Adapters) and external drive housings


Latch type SFF-8088 (4x) to latch type SFF-8088 (4x) connectors


SAS (Serial Attached SCSI) compliant


Fully compliant with SATA II specifications (Electrical Specifications, section 6.6)


Full duplex communication up to 3Gb each direction/channel


colour: Black


10 Year warranty

Product Details Allows you to connect an SFF-8087 host controller to an SAS backplane


connectors: SFF-8087 (Host) to SFF-8484 (Target)


length: 1m


10 year warranty

Product Details Allows you to connect an SAS host controller to 4 SATA hard drives


connectors: Mini SAS SFF-8087 (Host) to 4 x 7 way SATA latch type connectors (target) and 1 x 8 way sideband connector


colour: Yellow with black mesh


length: 1m


10 year warranty

Product Details Supports 3.5 " SAS / SATA II/1.0a drives of any capacity


Fits into a standard 5.25" expansion bay


Hard drive mounts directly into the back plane module without the need for a separate caddy


Innovative hot-plug design allows extremely quick drive swaps, minimizing down time


Lockable drive eject handle with automatic drive release system


Special 'No-Scratch' connector protects the hard drive contacts and is tested to exceed over 10,000 insertions/ejections


Sturdy, metal frame with shock absorbing silicon rubber mounts to reduce noise and vibration

Overview This multilane adapter board can be used with an external drive enclosure to allow up to four SATA hard disks to be connected. A single multilane cable links the board to your host system. Mounted on a metal bracket, the SCSI-I (50 Way Centronics) form factor makes it ideal for upgrading older drive enclosures to use new high speed SAS/SATA drives.

Product Details Allows 4 SATA drives to be connected to 1 external multilane connector


Supports transfer speeds of up to 6Gbps


Metal bracket with mounting holes, SCSI-I (50 Way Centronics) form factor


External multilane Mini-SAS SFF8088 connector for connecting to an external SAS/SATA storage system


2 year warranty

5m SAS/SATA II Multilane Infiniband Cable (SFF-8088 to SFF-8088)

Key Features:

For use with SAS/SATA HBAs (Host Board Adapters) and external drive housings
Latch type SFF-8088 (4x) to latch type SFF-8088 (4x) connectors
SAS (Serial Attached SCSI) compliant
Fully compliant with SATA II specifications (Electrical Specifications, section 6.6)
Full duplex communication up to 3Gb each direction/channel
Colour: Black
10 Year warranty
Cable length 5 m
Product colour Black

Product Details

Plugs directly into a SATA drive
40 Way IDC Male (controller) to Serial ATA (drive)
Includes 5.25" M/F splitter to 3.5” power adapter cable
Plug & Play installation, no software required
2 year warranty
Supports SATA Generation 1,2 & 3 Device: 1.5 to 6 Gbit/s
Supports many type of SATA150 / SATA-II / SATA 6G devices (Blu-ray Disc, SSD, Hard Disk, DVD, etc)
Supports HDD larger than 137GB
Bridge converter supports PC, Mac and Linux
Compatible with Ultra ATA 133/100/66/33
Dimensions: 75 x 23mm

Product Details For use with SAS/SATA HBAs (Host Board Adapters) and external drive housings


Latch type SFF-8088 (4x) to latch type SFF-8088 (4x) connectors


Full duplex communication up to 3Gb each direction/channel


colour: Black


10 Year warranty


SAS (Serial Attached SCSI) compliant


Fully compliant with SATA II specifications (Electrical Specifications, section 6.6)

Overview This adapter, also known as a SATA to mSATA adapter, converts a mSATA drive to a 2.5" drive form factor. It is the perfect solution for using mSATA SSD in any laptops, netbooks or other mobile device's standard 2.5" drive bay.

This adapter/caddy has an internal mSATA 52 pin connector and standard external 2.5" SATA 22 pin connector, as well as the same dimensions as a 2.5" drive with a 7mm height

Please Note: This product does not support mSATA drives that require more than 3.3V 1A.

Product Details Converts mSATA SSD to a 2.5” drive form factor


Install a smaller SSD hard drive into an older machine with SATA interface (Perfect for upgrading a laptop)


Internal 52 pin mSATA female connector, External 22 pin SATA male connector


Supplied with mounting screws & screwdriver


Hot swappable


Transparent to the OS and does not require any software drivers


Dimensions (WxDxH): 70 x 100 x 7mm


2 year warranty

Overview This hot-pluggable 3.5 inch SATA hard drive backplane allows you to quickly and effectively install a 3.5 inch SATA drive in an unused 5.25 inch drive bay. The module utilises the full potential of SATA III for transfer speeds up to 6 Gbps when paired with a compatible controller.

To install a drive, simply open the lockable faceplate, insert a HDD connectors first into the bay, push the drive in until the faceplate closes and your drive is ready to use. To remove the drive, simply open the lockable faceplate and the drive will be automatically ejected. No cables, no tools, no fuss.

Perfect for any task that requires accessing large volumes of data on the fly, the hot swap bay provides everything you need to carry out important projects while maintaining a reliable storage solution. An ideal solution for quick tool less installations, system builds or in a rack mounted industrial environments.

Contains SATA III 3.5 inch HDD Backplane Module with LED cable, Lockable


4x Screws for installation in 5.25 inch drive bay


2x Locking keys


Lindy Manual


Product Details Supports 3.5 inch SATA 1.5/3/6 Gbps drives of any capacity


Fits into a standard 5.25 inch expansion bay


Hard drive mounts directly into the backplane module without the need for a separate caddy while hot-plug design allows fast drive swaps to minimise down time


Features a lockable faceplate, automatic ejection mechanism and rubber bearings for vibration dispersal, shock absorption and noise dampening


2 year warranty

Product Details

Allows you to connect an SAS host controller to a SAS hard drive
Connectors: SFF-8087 to SFF-8087
Length: 1m
10 Year Warranty

Product Details

Bus Type: PCI-Express (PCI-e x1)
Speed: SATA III (6Gbit/sec)
External connectors: 2 x eSATA Female
Standard and low profile back plates supplied
Software Compatibility: Windows Vista (32/64 bit), XP/Server 2003/8 (32/64 bit) Windows 7/8/8.1/10
2 Year warranty
Port Multiplier and Native Command Queuing support
Supports SATA III transfer speeds of 1.5Gbps, 3.0Gbps and 6.0Gbps
Supports Serial ATA 2.6 specification
Chipset: Marvell 9128
Pin header for drive activity LEDs

2m SAS/SATA II Multilane Infiniband Cable (SFF-8470 to SFF-8088)

Key Features:

Cable length 2 m
Product colour Black
For use with SAS/SATA HBAs (Host Board Adapters) and external drive housings
Thumbscrew type SFF-8470 (4x) to latch type SFF-8088 (4x) connectors
SAS (Serial Attached SCSI) compliant
Fully compliant with SATA II specifications (Electrical Specifications, section 6.6)
Full duplex communication up to 3Gb each direction/channel
Colour: Black
10 Year warranty

USB 3.2 Type C to M.2 NVMe & SATA SSD Docking & Clone Station - Simultaneous access to an M.2 NVMe and a SATA SSD or Offline Cloning from an M.2 NVMe SSD to a 2.5"/3.5" SATA SSD/HDD as well as the other way round

Key Features:

Allows fast and simultaneous access to an M.2 NVMe and a SATA SSD/HDD
Features Offline Cloning from an M.2 NVMe SSD to a 2.5” or 3.5” SATA SSD or HDD as well as the other way round
Supports USB 3.2 Gen 2 SuperSpeed data rates up to 10Gbps
Compatible with USB Type C or A equipped computers
2 year warranty


The Lindy USB 3.2 Gen 2 Type C M.2 NVMe & SATA SSD/HDD Docking & Clone Station features both high-speed Docking as well as Clone functions. It supports simultaneous reading and writing to an M.2 NVMe SSD and a SATA SSD/HDD as well as Offline Cloning (copying data without connection to a host computer) from an M.2 NVMe SSD to a 2.5” or 3.5” SATA SSD or HDD as well as the other way round.

This Docking & Clone Station is an ideal tool for system installers and integrators, computer technicians and IT departments for quick backups or data recovery. It makes bit by bit clones (including Operating System and partitions) of the source disk onto the target disk, making it perfect for upgrading to larger capacity & different SSDs.

Information about USB 3.0, 3.1 & 3.2

USB 3.0, USB 3.1 and USB 3.2 PCs, cables and devices are all compatible with each other, when using either a USB Type A or USB Type C host interface.
USB 3.0, USB 3.1 Gen 1 and USB 3.2 Gen 1 all support data transfer rates up to 5 Gbps.
USB 3.1 Gen 2 and USB 3.2 Gen 2 both support data transfer rates up to 10 Gbps.


Specifications:

Interface: USB Type C to M.2 NVMe and SATA
Interface Standard: USB 3.2 / 3.1 Gen 2, PCIe Gen 3x2, SATA 3.0
Supported Bandwidth: 10Gbps, 15.75Gbps, 6Gbps
Chipset: JMS581D
Compatibility: USB Type C and Type A equipped computers
Inputs: 1 x USB Type C (Female)
Outputs: 1 x PCIe based M.2 (M key and M+B key), SATA 22 Pin (Male)
Power: 5.5/2.5mm DC socket
Dimensions WxDxH: 102x67.5x14.5mm (4.02x2.66x0.57in)
Housing Material: Aluminium & Plastic
Net Weight: 0.26kg (0.57lb)
Operating Temperature: 5°C - 35°C (41°F - 95°F)
Storage Temperature: -20°C - 50°C (-4°F - 122°F)
Humidity: 0 - 80% RH (non-condensing)
Power Requirements: 12VDC 2A
Colour: Black
Packaging Type: Carton Box
Packaging Dimensions: 160x110x100mm (6.3x4.33x3.94in)
Gross Weight: 0.39kg (0.86lb)
Warranty (Years): 2
Certificated: CE, FCC, RoHS, REACH, CP65
USB 3.2 Type C to M.2 NVMe & SATA SSD Docking & Clone Station
12V DC 2A Multi-Country power supply
USB 3.2 Gen 2 Type C to Type C/A cable, 26cm
Aluminium sheet
Thermal conductive silicone pad
M.2 rubber cartridge
Lindy Manual


Datasheets / User Manuals / Quick Start Guides/ Charts can be downloaded from our Documentation tab (above)

The Lindy SAS/SATA RAID Back Plane system is an internal drive housing that supports up to four 2.5" SAS/SATA hard drives in a single 5.25" expansion bay. It can easily be installed into a case or expansion system and is ideal for servers and workstations alike, allowing instant hot-swap access to the hard drives. To add RAID functionality, simply connect the back plane system to your computers RAID controller.

As the back plane system uses 2.5" SAS/SATA HDDs (not supplied) it consumes only a fraction of the power used by similar systems using 3.5" HDDs and requires less cooling - so is quieter to run.

Product Details

RAID compatible when connected to a suitable RAID controller
Supports hot swap function
Supports 4 x 2.5" SAS and SATA II/1.0a HDDs (not included)
Supports 9.5mm or 12.5mm height HDDs
Dip switch to set LED and spin up behaviour between:
LED flickering for HDD access and staggered HDD spin up
No LED flickering for HDD access and HDD spin up on power
Fits into a standard 5.25" expansion bay
2 year warranty