Lindy Accessories

Overview The Lindy Modular AV Face Plate System allows you to create your own custom face plates by using a combination of Snap-in Blocks and Keystone modules. Fit this F type Keystone into a Keystone Snap-in Block and place into a face plate along side other Keystone and Snap-in modules.

These modules provide a full range of solutions for AV, networking, voice and audio installations. The wide selection of modules and face plates can be custom configured giving you greater control and flexibility.

Please Note: The Lindy Modular AV Face Plate System must be used in conjunction with Lindy Keystone Snap-in Blocks and Face Plates. Place this Keystone into either a Single Keystone Snap-in Blocks or Dual Keystone Snap-in Blocks which come in packs of four. Then use with a Single Gang Face Plate or Double Gang Face Plate.

Product Details F type keystone female to female connector


75 Ohm connectors


Supplied in a pack of 2


Nickel plated connectors


Suitable for use with our range of snap in bezels and wall plates


2 year warranty

Product Details LP4 Power Male to 2 x Lp4 Power Female


Internal Power Cable


10 Year warranty

Overview Create an 8 Pin ATX connection from two LP4 power connectors

Product Details 2 x LP4 4 Way Molex Male to 1 x 8 way ATX Male


8 cores, 20AWG


Length 0.15m


10 Year Warranty

Product Details 1 x 6 Way PCIe Female


1 x 6 way PCIe Male


10 year warranty

The Lindy Modular AV Face Plate System allows you to create your own custom face plates by using a combination of Snap-in Blocks and Keystone modules. Fit this F type Keystone into a Keystone Snap-in Block and place into a face plate along side other Keystone and Snap-in modules.

These modules provide a full range of solutions for AV, networking, voice and audio installations. The wide selection of modules and face plates can be custom configured giving you greater control and flexibility.

Product Details

BNC Keystone module
Female to female nickel plated connectors
Supplied in a pack of 2
Suitable for use with the Lindy Modular AV Faceplate system
2 year warranty
Please Note: The Lindy Modular AV Face Plate System must be used in conjunction with Lindy Keystone Snap-in Blocks and Face Plates. Place this Keystone into either a Single Keystone Snap-in Blocks or Dual Keystone Snap-in Blocks which come in packs of four. Then use with a Single Gang Face Plate or Double Gang Face Plate.

Product Details Saves wear and tear on your expensive ports

Product Details Saves wear and tear on your expensive ports

BNX-60 & NC-60 Replacement Earpads

Key Features:

Replace left and right earpads of the BNX-60 or NC-60 headphones
High quality, protein leather
Simple installation
Provided in a pack with both left and right earpads
Design: Over Ear
2 year warranty


These spare earpads are a great solution for keeping the award-winning BNX-60 or NC-60 headphones looking as good as new, or for ensuring hygienic-use by replacing after shared usage.

Made of high quality, protein leather, these earpads ensure optimum comfort for long periods of use.

Specifications:

Dimensions (approx.) WxDxH: 80x20x100mm (3.15x0.79x3.94in)
Material: Protein Leather
Net Weight: 0.024kg (0.05lb)
Colour: Black
Packaging Type: Polybag
Packaging Dimensions: 174x194mm (6.85x7.64in)
Gross Weight: 0.04kg (0.09lb)
Warranty (Years): 2
Certificated: REACH & California Proposition 65


Package Contents:

Left BNX-60/NC-60 Earpad
Right BNX-60/NC-60 Earpad


Datasheets / User Manuals / Quick Start Guides/ Charts can be downloaded from our Documentation tab (above)

Product Details Helps prevent electrostatic charge building up when handling CMOS and other devices prone to electrostatic damage


Conductive threads in the fabric press against the skin allowing the charge to leak away to earth


Adjustable to ensure a comfortable fit


1meg ohm total resistance


2 Year Warranty


For Anti-Static Wrist Strap instructions see the manuals download.

Extend the life of your BNXe Wireless Headphones with premium replacement ear-pads designed for comfort, hygiene, and sustained audio performance. These ear-pads restore fit and feel after heavy use and are an efficient solution for shared environments or routine refreshes.

Key Features High-quality protein leather surface for a soft, premium touch.
Plush memory foam padding that conforms to the ear for extended comfort.
Improved passive noise isolation through a secure, comfortable seal.
Easy, tool-free installation compatible with BNXe wireless headphone models.
Durable construction engineered for repeated use and handling.
Hygienic replacement option ideal for shared or multi-user setups.
Non-invasive swap preserves original headphone drivers and fit.
Compatibility Specifically sized and fitted for BNXe Wireless Headphones. Designed to align with original mounting points so the headphones retain correct driver alignment and acoustic performance.

Material Composition Outer layer: premium protein leather for tactile comfort and easy cleaning. Inner layer: high-density memory foam for sustained cushioning and reduced pressure points during long listening sessions.

Comfort & Fit Contoured padding forms a gentle seal around the ear to reduce sound leakage and improve perceived bass response while maintaining breathability and comfort over hours of use.

Acoustic Considerations The ear-pad thickness and internal foam density are chosen to preserve the original acoustic spacing between driver and ear — maintaining the intended frequency balance and stereo imaging.

Installation Snap-on design supports quick, tool-free replacement. Clear orientation markers and a simple push-and-rotate action secure the ear-pad to the earcup housing.

Durability Protein leather resists everyday wear and maintains appearance with minimal cracking. Foam retains shape through repeated compressions to provide consistent comfort over time.

Hygiene & Maintenance Smooth surface wipes clean with a damp cloth and mild cleaner. Replace pads periodically in shared environments to maintain sanitary conditions and user comfort.

Use Cases Ideal for daily commuters, remote workers, content creators, and shared/enterprise headset environments where frequent use necessitates periodic refresh of contact surfaces.

Packaging & Contents Each package contains one pair of replacement ear-pads sized for BNXe Wireless Headphones and a concise installation guide. Packaging is compact to support efficient inventory and fulfilment workflows.

Product Notes Replacement ear-pads are a direct accessory; they do not modify electronics or internal components. Confirm model compatibility prior to purchase to ensure correct fit.

The Lindy 150m Bi-Directional IR signal extender is a high quality, reliable solution for transmitting infrared signals from IR remote controls up to 150m in open spaces. This allows the control of AV equipment in home, office, and retail spaces from convenient locations, through walls and ceilings, with no need for costly cable infrastructure.

Each transceiver's low power requirement through the USB interface and small form factor ensures simple and discreet professional installations.

The transceiver features a rotary dial used to select a vacant radio frequency channel to avoid interference from other IR devices, or create multiple configurations in the same space. This feature also allows one to one, one to many and many to many bi-directional systems to be set up with ease.

Compatibility with Alexa, Google Home and Logitech Harmony allows for integration with other home automation products, meaning users can use speech to send instructions to compatible AV devices and create a complete smart-home experience.

Please Note: one unit is included.Actual distances will vary depending on the construction of the building and any walls or floors that stand between the transceiver units.

4 Port DisplayPort 1.2 MST Hub - Connect 4 DisplayPort Displays to a DisplayPort Enabled Device

Key Features:



Connect 4 DisplayPort displays to a DisplayPort computer or laptop
Expand, duplicate or display independent DP signals over four DP monitors
Supports resolutions up to 4K 30Hz, and audio up to 7.1CH
Compatible with various graphics cards including AMD Eyefinity, NVIDIA Surround and Intel Collage
2 Year Warranty


The Lindy 4 Port DP MST Hub is an ideal solution for expanding or duplicating DisplayPort signals across 4 DisplayPort monitors.  MST hubs allow for the connection of a single DP source device including computers, laptops or notebooks to 4 separate DP displays, while also providing the ability to visualise content in multiple ways. Signals can be expanded across the displays to show large scale spreadsheets, create immersive panoramic gaming experiences or eye-catching digital signage in retail. Content can also be, independently shown on either display, great for developing a productive, multi-tasking working environment, or duplicated on the displays for use in hospitality, retail or educational scenarios.

With support up to 3840 x 2160 @ 30Hz 4:4:4 8bit, content can be viewed in ultra-realistic quality, ideal for applications that require a high resolution output such as graphic design, while compatibility with a variety of graphics cards including AMD Eyefinity, ensures issue free multi-screen playback.

Specification:



AV Interface: DisplayPort
Interface Standard: DP 1.2
Supported Bandwidth: 21.6Gbps
Maximum Resolution: 2 x 3840 x 2160 @ 30Hx 4:4:4 8bit, 4 x 1920 x 1080 @ 60Hz 4:4:4 8bit
HDCP Support: HDCP 1.4
Supported Audio: Up to 7.1CH
Input: DisplayPort (Male)
Output: 4 x DisplayPort (Female)
Power: Micro-USB (Female)
Dimensions (approx.) WxDxH: 105 x 14 x 65mm (4.13 x 0.55 x 2.56in)
Housing Material: ABS
Net Weight: 0.12kg (0.26lb)
Operating Temperature: -20°C - 40°C (-4°F - 104°F)
Storage Temperature: -40°C - 80°C (-40°F - 176°F)
Humidity: 5 - 90% RH (non-condensing)
Power Requirements: 5V1A
Colour: Black
Packaging Type: Polybag
Packaging Dimensions: 174 x 194 x 20mm (6.85 x 7.64 x 0.39in)
Gross Weight: 0.131kg (0.29lb)
Warranty (Years): 2
Certificated: CE, UKCA, FCC, RoHS, UL & REACH


 Package Contents:



DisplayPort MST Hub
USB Micro-B to USB Type A Cable


Please note: This hub is not compatible with Apple products

Datasheets / User Manuals / Quick Start Guides/ Charts can be downloaded from our Documentation tab (above)

Overview This Lindy AV adapter cables allows you to connect any device with trailing Phono / RCA leads to a device with a 3.5mm port.

Product Details connectors: 1 x 3 segment 3.5mm male jack to 2 x RCA/Phono female connectors -


White (Audio, left)


Red (Audio, right)


Cable length: 0.25m


10 year warranty

Overview The Lindy pack of 4 cable adapter tethers are a simple solution for securing cable pigtail adapters and cables together, countering common issues of loss, theft or accidental disconnection with minimum hassle for users and installers.

Either end of the tether can be secured around the adapter or cable connector, with the opposite end around the connected head shell, and tightened easily with crimp-style metal sleeves, providing a neat fix for possible disconnections and other similar issues, perfect for use in universities, conference rooms and other public spaces

With a stainless steel construction, this tether cannot also be easily snapped or cut, ensuring adapters and cables can’t be stolen or lost.

*Please note: This product requires reasonable force to ensure a secure installation using high quality standard or crimp style pliers

Product Details Secures cable pigtail adapters or extension cables to a cable, preventing accidental disconnection or loss


Easily adjustable for a variety of cable connectors


Black stainless steel tether wires


4 x tether wires, 8 x crimp-style metal sleeves


2 year warranty


*Images used for Demonstrative Purposes Only