Juniper Networks EX2300-C Accessories

EX-CBL-CON-USB Console cable

With USB Type A and mini-B connectors

EX2300-C-RMK Rack-mount Kit




To mount the switch on two posts of a two-post or a four-post rack: 1. Remove the switch from the shipping carton

2. Place the switch on a flat, stable surface

3. Align the mounting brackets along the front or rear of the side panels of the switch chassis depending on how you want to mount the switch.



4. Align the bottom holes in the mounting brackets with the holes on the side panels of the switch chassis.

5. Insert the mounting screws into the aligned holes. Tighten the screws.

6. Ensure that the other holes in the mounting brackets are aligned with the holes in the side panels. Insert a screw in each hole and tighten the screws.

7. Have one person grasp both sides of the switch, lift the switch, and position it in the rack, aligning the mounting bracket holes with the threaded holes in the rack rail. Align the bottom hole in each mounting bracket with a hole in each rack rail, making sure the chassis is level.



8. Have a second person secure the switch to the rack by using the appropriate screws. Tighten the screws.

9. Ensure that the switch chassis is level by verifying that all screws on one side of the rack are aligned with the screws on the other side.




To mount the switch on four posts of a rack: 1. Remove the switch from the shipping carton

2. Attach the front-mounting brackets (either the flush or the 2-in.-recess brackets) to the side mounting-rails by using 6 Phillips 4-40 flat-head mounting screws.



3. Place the switch on a flat, stable surface.

4. Align the side mounting-rails along the side panels of the switch chassis. Align the two holes in the rear of the side mounting-rails with the two holes on the rear of the side panel.

5. Insert the Phillips 4x6-mm flat-head mounting screws into the two aligned holes and tighten the screws. Ensure that the two holes in the rear of the side mounting-rails are aligned with the remaining two holes in the side panel.



6. Insert the Phillips 4x6-mm flat-head mounting screws into the remaining two holes in the side mounting-rails and tighten the screws.

7. Have one person grasp both sides of the switch, lift the switch, and position it in the rack, aligning the side mounting-rail holes with the threaded holes in the front post of the rack. Align the bottom hole in both the front-mounting brackets with a hole in each rack rail, making sure that the chassis is level.



8. Have a second person secure the front of the switch to the rack by using the appropriate screws for your rack.

9. Slide the rear mounting-blades into the side mounting-rails.



10. Attach the rear mounting-blades to the rear post by using the appropriate screws for your rack. Tighten the screws.

11. Ensure that the switch chassis is level by verifying that all the screws on the front of the rack are aligned with the screws at the back of the rack.

EX2300-C-MGNT-MNT Magnet mount

The EX2300-C Ethernet Switch offers a compact, power-efficient, cost-effective solution for low-density branch offices and enterprise workgroups. Featuring a fanless design, the EX2300-C is completely silent, making it ideal for open office deployments and commercial applications such as in retail stores. Access ports are available both with and without IEEE 802.3af Power over Ethernet (PoE) or 802.3at PoE+ for powering attached network devices.

The EX2300-C is cloud-ready and ZTP-enabled, so you can onboard, configure, and manage it with Juniper Mist™ Wired Assurance for improved connected-device experiences. In addition, the Juniper Mist Cloud streamlines deploying and managing your campus fabric, while Mist AI simplifies operations and improves visibility into the performance of connected devices. Support for Juniper’s Virtual Chassis technology allows the interconnection of up to three EX2300-C switches with a fourth Virtual Chassis-compatible EX Series switch, which can all be managed together as a single logical device.




To mount the switch on or under a surface made of ferrous material: 1. Remove the switch from the shipping carton (see Unpacking an EX2300 Switch).

2. Turn the chassis upside down.

3. (Optional) Attach the cable guard to protect cable connections:

a. Use the 3 truss-head screws to attach the cable guard to the bottom of the chassis.

b. Use the thumbscrews to tighten or loosen the cable guard so that you can insert cables.



4. Attach the self adhesive rubber pads provided with the magnet-mount kit to the bottom of the switch.



5. Attach the surface of the magnet mount sheet that has the Running Junos logo to the rubber pads.



6. Mount the switch along with the magnet mount sheet on the ferrous surface on which you want to mount the switch.



7. (Optional) Attach the standard cable lock to the security slot on the switch:

a. Fasten the cable to a desk or a rack and set the lock to unlocked position using the key.

b. Insert the lock into the security slot on your chassis and set the lock to the locked position using the key.

EX2300-C-CBL-GRD Cable guard




Product Diagram:

 

1 - Cable Guard

2 - Thumb Screws