D-Link Stacking Cables

40G QSFP+ to QSFP+ 1 m Direct Attach Stacking Cable

The 40G Passive QSFP+ Direct Attach Cable is a high performance, high bandwidth and cost-effective connection solution that supports 40G Gigabit Ethernet. The 40G Passive QSFP+ Direct Attach Cable is designed to support high-density connections for switches with 40G interface, much faster than SFP+.









Features QSFP+ (Quad Enhanced Small Form-factor Pluggable)
40 Gbps Gigabit Ethernet
• Fully Compliant with the following standards - SFP MSA (Multi-Source Agreement), EIA 364, UL 94, SFF-8436, SFF-8431, EIA-364-1000.01 








 






Better Performance High speeds of up to 40 Gbps and lower latency result in faster transmissions than other types of cables.






Cost-effective Solution QSFP+ connector on cable replaces four standard SFP+ cable assemblies, ensuring higher port density and cost savings.






Energy Efficiency Lower power consumption and EMI emissions means savings on energy usage and expenses, and less electronic interference.






Ideal for High-Bandwidth Operations The 40G Passive QSFP+ Twinaxial Direct Attach Cable supports speeds of up to 40 Gbps, while having lower crosstalk and power consumption than other cables. This makes it an optimal solution for handling high bandwidth transmission within short distances such as within a rack or between racks inside energy-efficient data centers.






Quad Small Form-factor Pluggable Plus Format The D-Link 40G Passive QSFP+ Twinaxial Direct Attach Cable uses Quad Small Form-factor Pluggable Plus format (QSFP+) connectors, which integrate four transmitting and four receiving channels. The QSFP+ cable assemblies can replace four standard SFP+ cable assemblies, resulting in higher port density, cost efficiency, and a reduction in power savings compared to standard SFP+.






Save on Costs The D-Link 40G Passive QSFP+ Twinaxial Direct Attach Cable features QSFP+ connectors on both ends, thus eliminating the need for expensive QSFP+ transceivers. This makes it more cost-effective than fiber cables which must use QSFP+ transceivers.












General Device Rate 40 Gbps Gigabit Ethernet Connector Type QSFP+ Cable Assembly Wire AWG 30 AWG

Physical Minimum Cable Bend Radius DEM-CB100QXS, DEM-CB300QXS: 32 mm (1.26 inches), DEM-CB100QXS-4XS: 23.5 mm (0.93 inches) Cable Characteristic Impedance 100 Ohms Voltage 30 V AC Current 0.5 A Temperature (Operating) -40 to 85 °C / -40 to 185 °F

Specifications Data transfer rate 40 Gbit/s Connector 1 QSFP+ Connector 2 4 x SFP+ Product colour Black Cable length 1 m

Package weight & dimensions Width 267 mm Height 46 mm Depth 317 mm Weight 426 g Full specification and details can be found in the

100 cm 10GbE Direct Attach SFP+ Cable

50 cm 10 GbE stacking cable for DGS-3120, DGS-3300 and DXS-3300 series. The cable has screw type CX4 connectors at both ends.

100G QSFP28 to QSFP28 1 m Direct Attach Stacking Cable

High-quality 100G QSFP28 connection cables for physical stacking (compatible with DXS-3610 series)









Features Quad Small Form-factor Pluggable 28 (QSFP28)
100 Gbps data rate
Compliant with the following standards - SFF-8436, SFF-8636, SFF-8665, EIA-364, and EIA-364-1000.01 





 






General Device Rate 100 Gbps Connector Type QSFP28 Cable Assembly Wire AWG 30 AWG

Functionality SFP MSA Standard SFF-8436, SFF-8636, SFF-8665 Electrical Connector Performance Test Standard EIA-364, EIA-364-1000.01 Flammability Standard UL 94

Physical Minimum Cable Bend Radius 34.5 mm / 1.36 in Cable Characteristic Impedance 100 Ohms Voltage 30 V AC Current 0.5 A Operating Temperature -40 to 75 °C / -40 to 167 °F

Specifications Data transfer rate 100 Gbit/s Connector 1 MPO Connector 2 MPO Product colour Black

Weight & dimensions Weight 45 g Size 12.7 cm / 5" Full specification and details can be found in the

40G QSFP+ to 4 x 10G SFP+ 1 m Direct Attach Cable

The DEM-CB100QXS-4XS QSFP+ to 4X SFP+ one-meter cable features a QSFP+ connector on one end, and four SFP+ connectors on the other end, allowing it to connect to up to four 10G servers









Features QSFP+ (Quad Enhanced Small Form-factor Pluggable)
40 Gbps Gigabit Ethernet
Fully Compliant with the following standards - SFP MSA (Multi-Source Agreement), EIA 364, UL 94, SFF-8436, SFF-8431, EIA-364-1000.01 













Better Performance High speeds of up to 40 Gbps and lower latency result in faster transmissions than other types of cables.






Cost-effective Solution QSFP+ connector on cable replaces four standard SFP+ cable assemblies, ensuring higher port density and cost savings.






Energy Efficiency Lower power consumption and EMI emissions means savings on energy usage and expenses, and less electronic interference.






Ideal for High-Bandwidth Operations The 40G Passive QSFP+ Twinaxial Direct Attach Cable supports speeds of up to 40 Gbps, while having lower crosstalk and power consumption than other cables. This makes it an optimal solution for handling high bandwidth transmission within short distances such as within a rack or between racks inside energy-efficient data centers.






Quad Small Form-factor Pluggable Plus Format The D-Link 40G Passive QSFP+ Twinaxial Direct Attach Cable uses Quad Small Form-factor Pluggable Plus format (QSFP+) connectors, which integrate four transmitting and four receiving channels. The QSFP+ cable assemblies can replace four standard SFP+ cable assemblies, resulting in higher port density, cost efficiency, and a reduction in power savings compared to standard SFP+.






Save on Costs The D-Link 40G Passive QSFP+ Twinaxial Direct Attach Cable features QSFP+ connectors on both ends, thus eliminating the need for expensive QSFP+ transceivers. This makes it more cost-effective than fiber cables which must use QSFP+ transceivers.












General Device Rate 40 Gbps Gigabit Ethernet Connector Type QSFP+ Cable Assembly Wire AWG 30 AWG

Functionality Minimum Cable Bend Radius DEM-CB100QXS, DEM-CB300QXS: 32 mm (1.26 inches), DEM-CB100QXS-4XS: 23.5 mm (0.93 inches) Cable Characteristic Impedance 100 Ohms Voltage 30 V AC Current 0.5 A Temperature (Operating) -40 to 85 °C / -40 to 185 °F

Specifications Data transfer rate 40 Gbit/s Connector 1 QSFP+ Connector 2 4 x SFP+ Product colour Black Cable length 1 m

Package weight & dimensions Width 267 mm Height 46 mm Depth 317 mm Weight 426 g Full specification and details can be found in the

300 cm 10GbE Direct Attach SFP+ Cable

100 cm 10 GbE stacking cable for DGS-3120, DGS-3300 and DXS-3300 series. The cable has screw type CX4 connectors at both ends.

40G QSFP+ to SFP+ 3 m Direct Attach Stacking Cable

The 40G Passive QSFP+ Direct Attach Cable is a high performance, high bandwidth and cost-effective connection solution that supports 40G Gigabit Ethernet. The 40G Passive QSFP+ Direct Attach Cable is designed to support high-density connections for switches with 40G interface, much faster than SFP+.

The DEM-CB300QXS-4XS QSFP+ to 4X SFP+ three-meter cable features a QSFP+ connector on one end, and four SFP+ connectors on the other end, allowing it to connect to up to four 10G servers. The 40G Passive QSFP+ Direct Attach Cable is certified to be compatible with D-Link products to provide you best performance and reliability.









Features QSFP+ (Quad Enhanced Small Form-factor Pluggable)
40 Gbps Gigabit Ethernet
Fully Compliant with the following standards - SFP MSA (Multi-Source Agreement), EIA 364, UL 94, SFF-8436, SFF-8431, EIA-364-1000.01 








 



Better Performance High speeds of up to 40 Gbps and lower latency result in faster transmissions than other types of cables.






Cost-effective Solution QSFP+ connector on cable replaces four standard SFP+ cable assemblies, ensuring higher port density and cost savings.






Energy Efficiency Lower power consumption and EMI emissions means savings on energy usage and expenses, and less electronic interference.






Ideal for High-Bandwidth Operations The 40G Passive QSFP+ Twinaxial Direct Attach Cable supports speeds of up to 40 Gbps, while having lower crosstalk and power consumption than other cables. This makes it an optimal solution for handling high bandwidth transmission within short distances such as within a rack or between racks inside energy-efficient data centers.






Quad Small Form-factor Pluggable Plus Format The D-Link 40G Passive QSFP+ Twinaxial Direct Attach Cable uses Quad Small Form-factor Pluggable Plus format (QSFP+) connectors, which integrate four transmitting and four receiving channels. The QSFP+ cable assemblies can replace four standard SFP+ cable assemblies, resulting in higher port density, cost efficiency, and a reduction in power savings compared to standard SFP+.






Save on Costs The D-Link 40G Passive QSFP+ Twinaxial Direct Attach Cable features QSFP+ connectors on both ends, thus eliminating the need for expensive QSFP+ transceivers. This makes it more cost-effective than fiber cables which must use QSFP+ transceivers.












General Device Rate 40 Gbps Gigabit Ethernet Connector Type QSFP+ Cable Assembly Wire AWG 30 AWG

Physical Minimum Cable Bend Radius DEM-CB100QXS, DEM-CB300QXS: 32 mm (1.26 inches), DEM-CB100QXS-4XS: 23.5 mm (0.93 inches) Cable Characteristic Impedance 100 Ohms Voltage 30 V AC Current 0.5 A Temperature (Operating) -40 to 85 °C / -40 to 185 °F

Specifications Data transfer rate 40 Gbit/s Connector 1 QSFP+ Connector 2 4 x SFP+ Product colour Black Cable length 1 m

Package weight & dimensions Width 267 mm Height 46 mm Depth 317 mm Weight 426 g Full specification and details can be found in the