Cat6 Modules

A Double Gang Faceplate complete with four CE cat6 Data Modules, Individual port labelling is also quick and easy with standard CE outlet slide in fields incorporated into the design. IDC Termination blocks are provided on the back of each module.

Category 6 UTP modules are standard 6C size. Each shuttered module is supplied with an ID window and label.

The module is cased in a high quality ABS plastic and is suitable for mounting in a variety of plates and housings. The low profile design and its 6C size make this item ideal for floor box installations.

Features

Standard Euromod Size
Category 6
Low Profile Design
Backward Compatible
Supports Gigabit Ethernet
Suitable for 22-26AWG stranded and solid wire, compatible with Krone punch down tool
The Cat6 transmission performance is in compliance with the ANSI/TIA/EIA 568 B.2-1 Standard

A Single Gang Faceplate complete with one CE cat6 Data Module, centralised in the faceplate using blanks to enable future upgradeability to a doulble outlet. Individual port labelling is also quick and easy with standard CE outlet slide in fields incorporated into the design. IDC Termination blocks are provided on the back of each module.

Single Gang Faceplate complete with two CE cat6 Data Modules, Individual port labelling is also quick and easy with standard CE outlet slide in fields incorporated into the design. IDC Termination blocks are provided on the back of each module.

Category 6 UTP modules are standard 25x50mm Euromod size. Each shuttered module is supplied with an ID window and label.

The module is cased in a high quality ABS plastic and is suitable for mounting in a variety of plates and housings due to its low profile design.

Features

Standard 25x50mm Euromod Size
Low Profile Design
Supports Gigabit Ethernet
Backwards Compatible
Suitable for 22-26AWG stranded and solid wire, compatible with Krone punch down tool
The Cat6 transmission performance is in compliance with the ANSI/TIA/EIA 568 B.2-1 Standard
Please Note: These modules are designed to fit only into CE Faceplates found Here

Product Overview

This is a highly durable waterproof enclosure designed to extend voice and data communications systems into damp or external environments.

Features & Benefits

Manufactured in durable polycarbonate
IP56 rated
Accepts standard 50 x 25 (mm) modules
Supplied 1x Cat6 RJ45 Modules as standard 
Includes stainless steel DIN rail
UK Manufactured

The Euromod modular system provides a flexible and versatile method of installation, allowing the user the choice of installing as many data outlets as required. The module is compatible with the Euromod range of wallplates and its angled design reduces patch cord bend radius, essential for C6 installations.

The Angled Euromod II module features the DataGate Category 6 connector. This superior RJ45 IDC includes a unique integral shutter that not only protects the connector from dust and contaminants, but the ingenious spring-loaded design also ejects improperly seated patch cords. The DataGate connector is dual color coded for either 568A or 568B wiring schedules and is RJ11 compatible.

Suitable for high-speed data transmission, the DataGate Category 6 connector has been designed to exceed the highest electrical performance standards in the industry. The DataGate connector is also backwards compatible with C5e systems.

Features & Advantages

25 x 50mm fascia
Shuttered RJ45 DataGate connector
Protected labeling facility
Euromod wall plate compatible
Angled fascia
RoHS Compliant
Technical Information

Jack Connector

Plastic Housing: Polycarbonate, UL94V-0 rated or equivalent
Operating Life: : Minimum 750 insertion cycles
Contact Material: Copper Alloy
Contact Plating: 1.27 micrometers Au/Ni
Contact Force: 100g minimum
Plug Retention Force: 6.8kg
IDC Connector

Plastic Housing: Polycarbonate, UL94V-0 rated or equivalent
Operating Life: Minimum 20 reterminations
Contact Material: Copper Alloy
IDC Contact Plating: Tin matte finish
Contact Force: 100g minimum
Wire Accommodation: 22-24 AWG solid
Electrical

Interface Resistance: 20 m?
Initial Contact Resistance: 2.5 m?
Insulation Resistance: >100 M?
Minimum Backbox Depth Requirement: 25mm
Termination Tool: 2.5 m?
Shipping Weight: 325g (Pk of 20)

The PowerCat 6 Angled MOD-SNAP III module is ideal for floor box applications. The product is a fully assembled unit featuring the shuttered DataGate connector in a 37.5 x 22mm fascia (BT6C size). The angled design reduces patch cord bend radius particularly in shallow floor box installations. The Angled MOD-SNAP III Module can also be used in the MOD-SNAP range of wall plates.

The MOD-SNAP III module features the DataGate Category 6 connector. This superior RJ45 IDC includes a unique integral shutter that not only protects the connector from dust and contaminants, but the ingenious spring-loaded design also ejects improperly seated patch cords. The DataGate connector is dual color coded for either 568A or 568B wiring schedules. The DataGate connector is also backwards compatible with C5e systems.

Features & Advantages

37.5 x 22mm fascia
Shuttered RJ45 DataGate connector
Protected labeling facility
Floor box and wall plate compatible
Angled fascia
Technical Information

Jack Connector

Plastic Housing: Polycarbonate, UL94V-0 rated or equivalent
Operating Life: : Minimum 750 insertion cycles
Contact Material: Copper Alloy
Contact Plating: 1.27 micrometers Au/Ni
Contact Force: 100g minimum
Plug Retention Force: 6.8kg
IDC Connector

Plastic Housing: Polycarbonate, UL94V-0 rated or equivalent
Operating Life: Minimum 20 reterminations
Contact Material: Copper Alloy
IDC Contact Plating: Tin/Lead Plate
Contact Force: 100g minimum
Wire Accommodation: 22-24 AWG solid
Electrical

Interface Resistance: 20 m?
Initial Contact Resistance: 2.5 m?
Insulation Resistance: >100 M?
Minimum Backbox Depth Requirement: 25mm
Termination Tool: 110
Shipping Weight: 312g (Pk of 20)

Cat6 UTP RJ45 3 in 1 Module

The new Excel 3 in 1 module offers the ultimate in flexibility, space utilisationand ease of installation. The totally modular design allows the mounting ofup to 3 shuttered RJ45 ports in a standard flat or bevelled single gangfaceplate, or up to 6 in a double gang facia. The unique design means that you only load shuttered outlets as required, any capacity within the plate which is required for a later date is simply blanked off, providing a neat and easy to use completed installation. Individual port labelling is also quick and easy with standard Excel outlet slide in fields incorporated into the design.

Cat6 UTP RJ45 6 in 1 Module/Faceplate

A Double Gang Faceplate complete with six Data Modules, Individual port labelling is also quick and easy with standard Excel outlet slide in fields incorporated into the design. IDC Termination blocks are provided on the back of each module.

Cat6 UTP RJ45 1 in 1 Module/Faceplate

A Single Gang Faceplate complete with one Data Module, centralised in the faceplate using blanks to enable future upgradeability to a double outlet. Individual port labelling is also quick and easy with standard Excel outlet slide in fields incorporated into the design..

Excel Category 6 UTP Modules meet all current draft specifications for Category 6 connecting hardware. When installed with Excel Category 6 cables and patch panels full link and channel compliance can also be achieved. These outlets also provide backward compatibility with the Category 5 and 5e systems and interoperability with alternative Category 6 offerings. Product design is based around the established Category 5e module and provide quick and easy termination using LSA compatible tooling. Port identification can be completed by use of either the integral slide label or simple application of an adhesive icon 

Module Features Supports Gigabit Ethernet
Category 6
25 x 50mm Euromod Size
Power Sum Compliant
Backward Compatible
LSA Style Termination Blocks
Built in Slide Label System
One Piece, Snap-in Design
Integral Cable Tie Position


Performance Overview

Excel Category 6 data outlets are manufactured and tested to the Category 6 performance standards. A range of performance characteristics are tested upto 250MHz including return loss, attenuation and near and far end crosstalk (NEXT and FEXT) for which both worst case and power sum tests are completed. Actual performance far exceeds the required standard - when tested in isolation and in circuit - resulting in significant headroom for even the most demanding of applications. 

As well as providing link and channel compliance - when installed with Excel category 6 components - with the aforementioned specification - the outlet is also backward compatible with Category 5 and 5e components.

Accessories
(Sold Separately)

Cat6 Patch Leads IDC Punchdown Tool Cat6 Solid Cable Cat6 Modules

Cat6 UTP RJ45 2 in 1 Module/Faceplate

Single Gang Faceplate complete with two Data Module, Individual port labelling is also quick and easy with standard Excel outlet slide in fields incorporated into the design.

Excel Category 6 UTP Modules meet all current draft specifications for Category 6 connecting hardware. When installed with Excel Category 6 cables and patch panels full link and channel compliance can also be achieved. These outlets also provide backward compatibility with the Category 5 and 5e systems and interoperability with alternative Category 6 offerings. Product design is based around the established Category 5e module and provide quick and easy termination using LSA compatible tooling. Port identification can be completed by use of either the integral slide label or simple application of an adhesive icon 

Module Features Supports Gigabit Ethernet
Category 6
25 x 50mm Euromod Size
Power Sum Compliant
Backward Compatible
LSA Style Termination Blocks
Built in Slide Label System
One Piece, Snap-in Design
Integral Cable Tie Position


Performance Overview

Excel Category 6 data outlets are manufactured and tested to the Category 6 performance standards. A range of performance characteristics are tested upto 250MHz including return loss, attenuation and near and far end crosstalk (NEXT and FEXT) for which both worst case and power sum tests are completed. Actual performance far exceeds the required standard - when tested in isolation and in circuit - resulting in significant headroom for even the most demanding of applications. 

As well as providing link and channel compliance - when installed with Excel category 6 components - with the aforementioned specification - the outlet is also backward compatible with Category 5 and 5e components.

Accessories
(Sold Separately)

Cat6 Patch Leads IDC Punchdown Tool Cat6 Solid Cable Cat6 Modules

Cat6 UTP RJ45 4 in 1 Module/Faceplate

A Double Gang Faceplate complete with four Data Modules, Individual port labelling is also quick and easy with standard Excel outlet slide in fields incorporated into the design.

Excel Category 6 UTP Modules meet all current draft specifications for Category 6 connecting hardware. When installed with Excel Category 6 cables and patch panels full link and channel compliance can also be achieved. These outlets also provide backward compatibility with the Category 5 and 5e systems and interoperability with alternative Category 6 offerings. Product design is based around the established Category 5e module and provide quick and easy termination using LSA compatible tooling. Port identification can be completed by use of either the integral slide label or simple application of an adhesive icon 

Module Features Supports Gigabit Ethernet
Category 6
25 x 50mm Euromod Size
Power Sum Compliant
Backward Compatible
LSA Style Termination Blocks
Built in Slide Label System
One Piece, Snap-in Design
Integral Cable Tie Position


Performance Overview

Excel Category 6 data outlets are manufactured and tested to the Category 6 performance standards. A range of performance characteristics are tested upto 250MHz including return loss, attenuation and near and far end crosstalk (NEXT and FEXT) for which both worst case and power sum tests are completed. Actual performance far exceeds the required standard - when tested in isolation and in circuit - resulting in significant headroom for even the most demanding of applications. 

As well as providing link and channel compliance - when installed with Excel category 6 components - with the aforementioned specification - the outlet is also backward compatible with Category 5 and 5e components.

Accessories
(Sold Separately)

Cat6 Patch Leads IDC Punchdown Tool Cat6 Solid Cable Cat6 Modules

Features

Category 6 compliant
Built in labelling field
Provides convenient workstation outlet for Gigabit Ethernet applications
Supplied with cable ties and fixing kit
Lifetime Product Warranty
Available in a choice of port density
25 Year System Warranty
Shuttered outlets as standard
Product Overview
The new Excel Plus surface mount boxes can be used in a wide variety of applications and provide a quick and easy method of installing up to 6 outlets to work areas. These shuttered units can be installed in desk clusters, beneath retail counters, under floors or wall mounted. They are also ideal for temporary or emergency installations

Performance Overview
The Excel Plus surface mount boxes are manufactured and tested to the Category 6 performance standards defined by the TIA/EIA, ISO and EN standards bodies. A range of performance characteristics are tested up to 250MHz including return loss, attenuation and near and far end crosstalk (NEXT and FEXT) for which both worst case and power sum tests are completed. Actual performance far exceeds the required standard – when tested in isolation and in circuit – resulting in significant headroom for even the most demanding of applications. As well as providing link and channel compliance – when installed with Excel category 6 components – with the aforementioned specification – the box is also backward compatible with Category 5 and 5e components.

Cat6 UTP RJ45 3 in 1 Module/Faceplate

A Double Gang Faceplate complete with Three Data Modules, centralised in the faceplate using blanks to enable future upgradeability to a Quad outlet. Individual port labelling is also quick and easy with standard Excel outlet slide in fields incorporated into the design.

Excel Category 6 UTP Modules meet all current draft specifications for Category 6 connecting hardware. When installed with Excel Category 6 cables and patch panels full link and channel compliance can also be achieved. These outlets also provide backward compatibility with the Category 5 and 5e systems and interoperability with alternative Category 6 offerings. Product design is based around the established Category 5e module and provide quick and easy termination using LSA compatible tooling. Port identification can be completed by use of either the integral slide label or simple application of an adhesive icon 

Module Features Supports Gigabit Ethernet
Category 6
25 x 50mm Euromod Size
Power Sum Compliant
Backward Compatible
LSA Style Termination Blocks
Built in Slide Label System
One Piece, Snap-in Design
Integral Cable Tie Position


Performance Overview

Excel Category 6 data outlets are manufactured and tested to the Category 6 performance standards. A range of performance characteristics are tested upto 250MHz including return loss, attenuation and near and far end crosstalk (NEXT and FEXT) for which both worst case and power sum tests are completed. Actual performance far exceeds the required standard - when tested in isolation and in circuit - resulting in significant headroom for even the most demanding of applications. 

As well as providing link and channel compliance - when installed with Excel category 6 components - with the aforementioned specification - the outlet is also backward compatible with Category 5 and 5e components.

Accessories
(Sold Separately)

Cat6 Patch Leads IDC Punchdown Tool Cat6 Solid Cable Cat6 Modules

The Excel 3 in 1 module offers the ultimate in flexibility, space utilisation and ease of installation. The totally modular design allows the mounting of up to 3 shuttered RJ45 ports in a standard flat or bevelled single gang faceplate or up to 6 in a double gang fascia. The unique design means that you only load shuttered outlets as required, any capacity within the plate which is required for a later date is simply blanked off, providing a neat and easy to use completed installation. Individual port labelling is also quick and easy with standard Excel outlet slide in fields incorporated into the design.

Features

Category 6 compliant
High density design
Individual snap in modules
Fit standard Excel Faceplates (3 required for Single Faceplates, 6 required for Double Faceplates)
LSA compatible IDC
Individual port slide labelling system
Module dimensions 16.6(w) x 50(h) x 31.5(d) mm
Please Note: These modules are designed to fit only into Excel Faceplates found Here

Performance Overview

Excel Category 6 data outlets are manufactured and tested to the Category 6 performance standards. A range of performance characteristics are tested upto 250MHz including return loss, attenuation and near and far end crosstalk (NEXT and FEXT) for which both worst case and power sum tests are completed. Actual performance far exceeds the required standard - when tested in isolation and in circuit - resulting in significant headroom for even the most demanding of applications.  

As well as providing link and channel compliance - when installed with Excel category 6 components – with the aforementioned specification - the outlet is also backward compatible with Category 5 and 5e components.

Pre-assembled faceplates can be ordered to save installation time.

Cat6 UTP Excel RJ45 Shuttered Module

Excel Category 6 UTP Modules meet all current draft specifications for Category 6 connecting hardware. When installed with Excel Category 6 cables and patch panels full link and channel compliance can also be achieved. These outlets also provide backward compatibility with the Category 5 and 5e systems and interoperability with alternative Category 6 offerings. Product design is based around the established Category 5e module and provide quick and easy termination using LSA compatible tooling. Port identification can be completed by use of either the integral slide label or simple application of an adhesive icon 

Please Note: These modules are designed to fit only into Excel Faceplates found Here

Features Supports Gigabit Ethernet
Category 6
25 x 50mm Euromod Size
Power Sum Compliant
Backward Compatible
LSA Style Termination Blocks
Built in Slide Label System
One Piece, Snap-in Design
Integral Cable Tie Position


Performance Overview

Excel Category 6 data outlets are manufactured and tested to the Category 6 performance standards. A range of performance characteristics are tested upto 250MHz including return loss, attenuation and near and far end crosstalk (NEXT and FEXT) for which both worst case and power sum tests are completed. Actual performance far exceeds the required standard - when tested in isolation and in circuit - resulting in significant headroom for even the most demanding of applications. 

As well as providing link and channel compliance - when installed with Excel category 6 components – with the aforementioned specification - the outlet is also backward compatible with Category 5 and 5e components.

Pre-assembled faceplates can be ordered to save installation time.

Cat6 UTP Excel RJ45 Shuttered Module

Excel Category 6 UTP Modules meet all current draft specifications for Category 6 connecting hardware. When installed with Excel Category 6 cables and patch panels full link and channel compliance can also be achieved. These outlets also provide backward compatibility with the Category 5 and 5e systems and interoperability with alternative Category 6 offerings. Product design is based around the established Category 5e module and provide quick and easy termination using LSA compatible tooling. Port identification can be completed by use of either the integral slide label or simple application of an adhesive icon 

Please Note: These modules are designed to fit only into Excel Faceplates found Here

Features Supports Gigabit Ethernet
Category 6
25 x 50mm Euromod Size
Low Profile Design
Power Sum Compliant
LSA Style Termination Blocks
Built in Slide Label System
One Piece, Snap-in Design
Integral Cable Tie Position


Performance Overview

Excel Category 6 data outlets are manufactured and tested to the Category 6 performance standards. A range of performance characteristics are tested upto 250MHz including return loss, attenuation and near and far end crosstalk (NEXT and FEXT) for which both worst case and power sum tests are completed. Actual performance far exceeds the required standard - when tested in isolation and in circuit - resulting in significant headroom for even the most demanding of applications. 

Pre-assembled faceplates can be ordered to save installation time.

UTP RJ45 Cat5e Shuttered Module - LJ6C Size

Excel Category 6 6C RJ45 modules comply with the standards for Category 6. Each shuttered module is supplied with a slide label field and space above, this is allowed for use of self adhesive or further labelling if required. Termination can be made using LSA compatible tooling. The low profile and 6C cut out design makes this module ideal for installations in floor box environments or shallow dado trunking

Features Supports Gigabit Ethernet
Category 6
6C design (22mm wide x 37mm high x 28.4mm deep)
Power Sum Compliant
LSA Style Termination Blocks
Built in Slide Label System


Performance Overview

Excel Category 6 data outlets are manufactured and tested to the Category 6 performance standards. A range of performance characteristics are tested upto 250MHz including return loss, attenuation and near and far end crosstalk (NEXT and FEXT) for which both worst case and power sum tests are completed. Actual performance far exceeds the required standard - when tested in isolation and in circuit - resulting in significant headroom for even the most demanding of applications.  

As well as providing link and channel compliance - when installed with Excel category 6 components – with the aforementioned specification - the outlet is also backward compatible with Category 5 and 5e components.