Blustream Converters and Adaptors

The ADC11AU provides a straightforward way to convert analogue left and right stereo audio into high-quality digital audio. Designed for clean signal conversion, it enables analogue audio sources to integrate seamlessly with modern digital audio systems while maintaining consistent output quality.

Key Features of Blustream ADC11AU Analogue to digital audio conversion for left / right stereo sources
Simultaneous S/PDIF optical and coaxial digital PCM outputs
16-bit 48kHz digital audio conversion for accurate sound reproduction
Simple plug and play operation
Analogue to Digital Audio Conversion The ADC11AU converts standard analogue stereo audio signals into digital PCM format, allowing older audio equipment to connect with digital amplifiers, recorders, and distribution systems.

Dual Digital Output Options With both optical and coaxial S/PDIF outputs available at the same time, the ADC11AU supports flexible audio routing. This makes it suitable for feeding multiple digital devices without the need for additional splitters or converters.

Consistent 16-bit 48kHz Audio Performance The converter processes audio at 16-bit, 48kHz, ensuring stable and reliable digital output suitable for a wide range of professional and consumer audio applications.

Plug and Play Integration Designed for quick installation, the ADC11AU operates as a plug and play solution. No configuration or software is required, making it ideal for fast deployment in both permanent and temporary audio setups.

The DAC12AU Digital to Analogue Converter is a compact and efficient solution for converting modern digital audio signals into high-quality analogue stereo output. Designed for flexibility, it supports both optical and coaxial digital inputs while delivering simultaneous analogue and digital outputs, making it ideal for integrating newer audio sources with existing audio equipment.

Key Features of Blustream DAC12AU Digital-Analogue Converter Converts optical or coaxial digital audio to analogue stereo L/R output
Converts optical digital audio input to coaxial digital audio output
Automatic detection of active digital input
Optical digital input priority over coaxial input
Concurrent analogue L/R and coaxial digital audio output
Supports 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, and 192 kHz sample rates up to 24-bit
Plug-and-play design with no driver installation required
Digital to Analogue Audio Conversion The DAC12AU converts digital audio signals from either optical (TOSLINK) or coaxial inputs into clear analogue stereo left and right audio. This allows seamless connection between digital audio sources and analogue amplifiers or speakers without signal complexity.

Simultaneous Analogue and Digital Output This converter is capable of outputting analogue L/R audio and coaxial digital audio at the same time. This concurrent output design supports flexible audio routing without the need for additional splitters or converters.

Optical to Coaxial Digital Conversion In addition to analogue conversion, the DAC12AU includes a built-in digital converter that transforms optical digital audio into a coaxial digital output, ensuring compatibility with a wider range of digital audio devices.

Automatic Input Detection The unit automatically detects which digital input is active, removing the need for manual switching. When both inputs are connected, the optical input is given priority to ensure consistent signal handling.

High-Resolution Audio Support Supporting sample rates up to 192kHz at 24-bit resolution, the DAC12AU is designed to deliver detailed and accurate sound reproduction across a wide range of audio formats.

Simple Plug-and-Play Operation With no drivers or configuration required, the DAC12AU is ready to use straight out of the box. Its plug-and-play design ensures quick installation and reliable performance in both home and professional environments.

Note: The DAC12AU does not down-mix multi-channel audio signals and is intended for stereo audio applications only.

The DIG11AU is a compact digital audio converter engineered to route high-quality digital audio between coaxial and optical formats. It enables flexible signal distribution while maintaining signal integrity across multiple output paths.

Key Features of Blustream DIG11AU Digital Audio Converter Converts digital audio between optical and coaxial formats
Supports optical-to-optical and coaxial output, or coaxial-to-optical and coaxial output
Simultaneous optical and coaxial digital outputs
Supports 32kHz, 44.1kHz, 48kHz, 96kHz, and 192kHz sample rates
Up to 24-bit audio resolution
Plug-and-play operation
Digital Audio Conversion Designed to handle both optical and coaxial digital audio sources, the DIG11AU allows seamless conversion between formats without manual reconfiguration. This makes it suitable for environments where mixed digital audio standards are in use.

Simultaneous Output Distribution Both optical and coaxial digital outputs operate concurrently, regardless of the selected input type. This allows the same audio signal to be distributed to multiple destinations at the same time without additional splitters or processors.

High-Resolution Audio Support Supporting sample rates up to 192kHz at 24-bit resolution, the DIG11AU preserves audio detail and clarity for demanding playback systems. It also maintains compatibility with standard sample rates commonly used in professional and consumer audio setups.

Simple Integration With a plug-and-play design, the DIG11AU integrates easily into existing audio systems. No configuration software or complex setup is required, allowing for quick deployment in both fixed and portable installations.

The Blustream DAC13DB is a dedicated digital-to-analogue audio converter designed to reliably downmix multichannel digital audio into high-quality stereo output. It is purpose-built for installations requiring consistent 2-channel audio delivery from modern source devices that output Dolby or DTS multichannel formats via optical or coaxial connections.

Key Features of Blustream DAC13DB Digital Audio Converter Down-mixes 5.1ch Dolby Audio® and DTS Audio to 2ch stereo
Supports optical Toslink and coaxial digital audio inputs
Simultaneous analogue, optical, and coaxial audio outputs
Compatible with PCM, Dolby Digital, and DTS audio formats
Supports up to 24-bit / 96kHz audio signals
Multichannel to Stereo Conversion The DAC13DB is engineered to convert embedded 5.1 channel Dolby Digital and DTS audio signals into a clean, balanced 2-channel stereo output. This ensures compatibility with stereo audio systems while preserving clarity and signal integrity.

Digital Audio Input Compatibility Supporting both optical Toslink and coaxial digital inputs, the DAC13DB integrates easily with a wide range of source devices including televisions, media players, and AV distribution systems.

Simultaneous Audio Outputs The unit provides concurrent stereo audio output via analogue, optical Toslink, and coaxial connections. This allows flexible routing to multiple audio destinations without the need for additional signal splitters.

Dolby and DTS Format Support The DAC13DB supports a broad range of commonly used digital audio formats, including PCM 2ch, Dolby Digital 2ch and 5.1ch, and DTS 2ch and 5.1ch. This ensures reliable performance across varied content sources.

High-Resolution Audio Processing Designed to handle audio signals up to 24-bit with sampling rates up to 96kHz, the DAC13DB maintains accurate audio reproduction suitable for both commercial and residential AV environments.

Compact and Purpose-Built Design With a focused feature set and compact form factor, the DAC13DB is well suited for rack installations, behind-display mounting, or discreet placement within AV signal chains where dependable stereo audio conversion is required.

The DA22DIG is a compact Dante® audio interface designed to bridge analogue and digital audio sources with Dante® networks. It provides reliable two-channel encoding and decoding, supporting professional audio distribution in AV, broadcast, and networked audio environments where flexibility and clean signal transport are essential.

Key Features of Bluestream DA22DIG Audio Encoder / Decoder Encodes 2-channel analogue or digital audio to Dante®
Decodes Dante® digital audio to 2-channel analogue and digital outputs
Selectable digital audio input via optical TOSLINK or coaxial RCA
Configurable microphone input with 48V phantom power
Independent input sensitivity and output gain control
Supports 44.1kHz, 48kHz, and 96kHz sample rates at 24-bit
Configurable Dante® latency (1ms, 2ms, or 5ms)
AES67 RTP audio transport compatibility
Powered via IEEE 802.3af PoE or 12V DC input
Dante® Encoding Flexibility The DA22DIG can encode either two-channel analogue audio or digital audio sources directly onto a Dante® network. Input source selection is handled via DIP-switch configuration, allowing quick adaptation to different installation requirements without software dependency.

Dante® Decoding Output Options Incoming Dante® audio streams can be decoded to both analogue and digital audio outputs simultaneously. This enables seamless integration with existing audio equipment while maintaining a clean digital signal path across the network.

Selectable Digital Audio Inputs The unit supports both optical TOSLINK and coaxial RCA digital audio inputs. Selection between formats is hardware-based, ensuring stable operation and compatibility with a wide range of digital source devices.

Microphone Input with Phantom Power A configurable microphone input is included, providing 48V phantom power for condenser microphones. This allows the DA22DIG to be deployed in voice reinforcement, paging, or conferencing applications without external mic preamps.

Precision Input and Output Control Independent sensitivity adjustment for each input channel and dedicated gain control for outputs allow precise audio level management. This ensures optimal signal integrity across varying source and destination devices.

AES67 and Dante® Network Compatibility In addition to native Dante® operation, the DA22DIG supports AES67 RTP audio transport. This expands interoperability with other networked audio systems and standards-based audio infrastructure.

Flexible Powering Options The device supports Class 3 IEEE 802.3af Power over Ethernet, allowing power and data to be delivered over a single network cable. For environments without PoE-enabled switches, a 12V DC power input is also available.

The DA22XLR-WP-EU-V2 is a versatile Dante® network wall plate that allows seamless conversion of analogue audio into a digital audio network. With dual input and output channels, adjustable phantom power, and flexible mounting options, it is designed to integrate effortlessly into modern audio setups, making it the ideal BYOD interface for both professional and casual environments.

Key Features of Blustream DA22XLR-WP-EU-V2 Dante® XLR Audio Converter Dante® network wall plate interface for 2 x audio inputs and 2 x audio outputs
Converts 2 x balanced / unbalanced / MIC audio sources to Dante® audio channels
Converts 2 x Dante® audio channels to balanced / unbalanced audio outputs
Switchable 48V/0.5mA Phantom power for each MIC XLR input
Adjustable MIC / line sensitivity from +24dBu to -28dBV for each XLR input
Adjustable line gain from +20 dBu to -28 dBV for each XLR output
Supports 44.1, 48 & 96kHz sample rates @ 24 Bit
Configurable Dante® device latency (1, 2, or 5ms via Dante® Controller)
Supports AES67 RTP audio transport
Powered via Class 0 IEEE 802.3af PoE or 12V DC adapter
Magnetic faceplate design for both UK & EU backbox compatibility
Multi-Input / Output Functionality The DA22XLR-WP-EU-V2 provides two independent input channels and two output channels, allowing full analogue-to-digital and digital-to-analogue conversion in a compact wall plate form factor.

Adjustable Phantom Power & Sensitivity Each MIC input includes switchable 48V phantom power, along with adjustable MIC and line sensitivity, accommodating a wide range of microphones and line-level sources for professional audio flexibility.

High-Quality Audio Support Supports multiple sample rates (44.1, 48 & 96kHz) at 24-bit resolution, ensuring high fidelity audio throughout the Dante® network for both live and recorded applications.

Flexible Latency Configuration Device latency can be configured to 1, 2, or 5ms through Dante® Controller, allowing precise timing alignment across complex networked audio systems.

Power Options The DA22XLR-WP-EU-V2 is powered via PoE for convenient network-based deployment or a 12V DC adapter for non-PoE setups, providing flexibility in installation environments.

Universal Faceplate Design Magnetic faceplate surround accommodates both UK and EU backboxes, making installation straightforward in a variety of international settings.

The DA44AU is a four input / four output Dante® digital audio converter designed to integrate analogue audio equipment seamlessly into a Dante® network. It enables reliable conversion between analogue and Dante® audio signals, making it suitable for a wide range of professional AV and audio distribution environments.

Key Features of DA44AU 4 x analogue audio inputs converted to Dante® compatible signals
4 x Dante® audio inputs converted to analogue audio outputs
Balanced and unbalanced analogue audio input support
Microphone line level inputs with 48V / 0.5mA phantom power
Supports 44.1kHz, 48kHz, and 96kHz sample rates at 24-bit
Configurable Dante® latency (1ms, 2ms, or 5ms via Dante® Controller)
Independent per-channel input gain control
Supports AES67 RTP audio transport
Analogue to Dante® Audio Conversion The DA44AU allows non-Dante® audio sources such as mixing consoles, amplifiers, computers, and compatible AV distribution equipment to be introduced into a Dante® network. Analogue signals are converted with precision to ensure stable and consistent digital audio transport.

Dante® to Analogue Audio Output In addition to analogue-to-network conversion, the DA44AU converts Dante® audio streams back into analogue outputs. This enables Dante® audio to be distributed to amplifiers, speakers, or other analogue audio devices without additional processing equipment.

Flexible Input Support Each analogue input supports both balanced and unbalanced audio signals, as well as microphone-level inputs. Integrated phantom power support allows condenser microphones to be connected directly, reducing the need for external preamp equipment.

High-Quality Audio Performance With support for multiple sample rates up to 96kHz at 24-bit, the DA44AU delivers clear and accurate audio reproduction. Independent gain adjustment on each input channel allows precise signal control to suit varying source levels.

Network and Protocol Compatibility The DA44AU supports configurable Dante® device latency to suit different network conditions and system requirements. Compatibility with AES67 RTP audio transport ensures interoperability with other compliant audio-over-IP systems.