APC Metered Easy PDUs

Easy Metered Rack PDUs provide real-time remote monitoring of connected loads. User-defined alarms warn of potential circuit overloads before critical IT failures occur.




Product Features

Ultra-light weight thanks to aluminum housing


Support both toolless mounting and bracket mounting


Built-in input cord with Industrial connector for vertical PDU


Low-profile in depth, more convenience for equipment installation
User-friendly and simple Web interface and LCD screen


Support network port , easy for data communication


Field-replaceable control module, easy for maintenance
 
Product Benefits

Single input power source

Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections. Rack-Mountable

Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.  
Remote Management Capabilities

Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements. Local Current Monitoring Display

The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)  
Load indicator LED

Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.


Flash Upgradeable

Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. Alarm Thresholds

Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.  

EPDU1016M Technical Specification Electrical Nominal Voltage 230VAC Input Circuit 16A Input Frequency 50/60Hz Input Connector IEC-320 C20 200-240V Inlet Input Cord Length 2.5m Output Voltage 200-240VAC, 1PH Output Receptacles ( 8 )C13 Circuit Breakers N/A Physical Mount Style Horizontal (19" rackmountable) Width 482mm Height 44.4mm Depth 44.4mm Housing Material Aluminum extrusion Tool-less Mounting N/A Colour Black User Interface Local User Interface LCD Display, Language: English Local User Control 1 Button for scroll/select/Reset Communication I/O 1 Network Port, 1 Temperature/Humidity Port Remote Management Capabilities http/https, SNMP V1, V2, V3 Environmental Operating Temperature -5oC to +45oC Operating Humidity 5-95%RH, non-condensing Elevation Operating/Storage 0–3000m / 0–15000m Regulatory EMC CE, followed by standard EN55035, EN55032, EN55024 Safety CE, TUV, followed by standard EN/IEC62368-1 Environment RoHS, REACH Package Rack Mounting Brackets M6x16mm screw (4pcs), M6 cage nut (4pcs) Safety Sheet Included Installations Instructions Included Package Dimensions 560*150*80mm Weight/Shipping Weight 0.68KG/1.32KG Accessory Part Number EPDU-TH (need to be ordered separately) Warranty Length 1 Year

Easy Metered Rack PDUs provide real-time remote monitoring of connected loads. User-defined alarms warn of potential circuit overloads before critical IT failures occur.




Product Features

Ultra-light weight thanks to aluminum housing


Support both toolless mounting and bracket mounting


Built-in input cord with Industrial connector for vertical PDU


Low-profile in depth, more convenience for equipment installation
User-friendly and simple Web interface and LCD screen


Support network port , easy for data communication


Field-replaceable control module, easy for maintenance
 
Product Benefits

Single input power source

Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections. Rack-Mountable

Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.  
Remote Management Capabilities

Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements. Local Current Monitoring Display

The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)  
Load indicator LED

Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.


Flash Upgradeable

Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. Alarm Thresholds

Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.  

EPDU1116M Technical Specification Electrical Nominal Voltage 230VAC Input Circuit 16A Input Frequency 50/60Hz Input Connector IEC 309 16A 2P+E Input Cord Length 3m Output Voltage 200-240VAC, 1PH Output Receptacles ( 18 ) C13 ( 3 ) C19 Circuit Breakers N/A Physical Mount Style Vertical Width 62mm Height 902mm Depth 44.4mm Housing Material Aluminum extrusion Tool-less Mounting Yes Colour Black User Interface Local User Interface LCD Display, Language: English Local User Control 1 Button for scroll/select/Reset Communication I/O 1 Network Port, 1 Temperature/Humidity Port Remote Management Capabilities http/https, SNMP V1, V2, V3 Environmental Operating Temperature -5oC to +45oC Operating Humidity 5-95%RH, non-condensing Elevation Operating/Storage 0–3000m / 0–15000m Regulatory EMC CE, followed by standard EN55035, EN55032, EN55024 Safety CE, TUV, followed by standard EN/IEC62368-1 Environment RoHS, REACH Package Rack Mounting Brackets M5x10mm, self-tapping screw (4pcs), L type bracket 2pcs (screw included) Safety Sheet Included Installations Instructions Included Package Dimensions 1320*160*110mm Weight/Shipping Weight 2.5KG/3KG Accessory Part Number EPDU-TH (need to be ordered separately) Warranty Length 1 Year

Easy Metered Rack PDUs provide real-time remote monitoring of connected loads. User-defined alarms warn of potential circuit overloads before critical IT failures occur.




Product Features

Ultra-light weight thanks to aluminum housing


Support both toolless mounting and bracket mounting


Built-in input cord with Industrial connector for vertical PDU


Low-profile in depth, more convenience for equipment installation
User-friendly and simple Web interface and LCD screen


Support network port , easy for data communication


Field-replaceable control module, easy for maintenance
 
Product Benefits

Single input power source

Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections. Rack-Mountable

Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.  
Remote Management Capabilities

Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements. Local Current Monitoring Display

The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)  
Load indicator LED

Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.


Flash Upgradeable

Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. Alarm Thresholds

Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.  

EPDU1132M Technical Specification Electrical Nominal Voltage 230VAC Input Circuit 32A Input Frequency 50/60Hz Input Connector IEC 309 32A 2P+E Input Cord Length 3m Output Voltage 200-240VAC, 1PH Output Receptacles ( 20 ) C13 ( 4 ) C19 Circuit Breakers 2 X 16A 1-pole hydraulic-magnetic circuit breakers Physical Mount Style Vertical Width 62mm Height 1175mm Depth 44.4mm Housing Material Aluminum extrusion Tool-less Mounting Yes Colour Black User Interface Local User Interface LCD Display, Language: English Local User Control 1 Button for scroll/select/Reset Communication I/O 1 Network Port, 1 Temperature/Humidity Port Remote Management Capabilities http/https, SNMP V1, V2, V3 Environmental Operating Temperature -5oC to +45oC Operating Humidity 5-95%RH, non-condensing Elevation Operating/Storage 0–3000m / 0–15000m Regulatory EMC CE, followed by standard EN55035, EN55032, EN55024 Safety CE, TUV, followed by standard EN/IEC62368-1 Environment RoHS, REACH Package Rack Mounting Brackets M5x10mm, self-tapping screw (4pcs), L type bracket 2pcs (screw included) Safety Sheet Included Installations Instructions Included Package Dimensions 1320*160*110mm Weight/Shipping Weight 3.72KG/4.48KG Accessory Part Number EPDU-TH (need to be ordered separately) Warranty Length 1 Year

Easy Metered Rack PDUs provide real-time remote monitoring of connected loads. User-defined alarms warn of potential circuit overloads before critical IT failures occur.




Product Features

Ultra-light weight thanks to aluminum housing


Support both toolless mounting and bracket mounting


Built-in input cord with Industrial connector for vertical PDU


Low-profile in depth, more convenience for equipment installation
User-friendly and simple Web interface and LCD screen


Support network port , easy for data communication


Field-replaceable control module, easy for maintenance
 
Product Benefits

Single input power source

Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections. Rack-Mountable

Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.  
Remote Management Capabilities

Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements. Local Current Monitoring Display

The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)  
Load indicator LED

Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.


Flash Upgradeable

Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. Alarm Thresholds

Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.  

EPDU1216M Technical Specification Electrical Nominal Voltage 400VAC, 3PH Input Circuit 16A, 3phase Input Frequency 50/60Hz Input Connector IEC 309 16A 3P+N+E Input Cord Length 2m Output Voltage 200-240VAC, 1PH Output Receptacles ( 21 ) C13 ( 3 ) C19 Circuit Breakers N/A Physical Mount Style Vertical Width 62mm Height 1175mm Depth 44.4mm Housing Material Aluminum extrusion Tool-less Mounting Yes Colour Black User Interface Local User Interface LCD Display, Language: English Local User Control 2 Buttons for scroll/select/Reset Communication I/O 1 Network Port, 1 Temperature/Humidity Port Remote Management Capabilities http/https, SNMP V1, V2, V3 Environmental Operating Temperature -5oC to +45oC Operating Humidity 5-95%RH, non-condensing Elevation Operating/Storage 0–3000m / 0–15000m Regulatory EMC CE, followed by standard EN55035, EN55032, EN55024 Safety CE, TUV, followed by standard EN/IEC62368-1 Environment RoHS, REACH Package Rack Mounting Brackets M5x10mm, self-tapping screw (4pcs), L type bracket 2pcs (screw included) Safety Sheet Included Installations Instructions Included Package Dimensions 1320*160*110mm Weight/Shipping Weight 2.74KG/3.26KG Accessory Part Number EPDU-TH (need to be ordered separately) Warranty Length 1 Year

Easy Metered Rack PDUs provide real-time remote monitoring of connected loads. User-defined alarms warn of potential circuit overloads before critical IT failures occur.




Product Features

Ultra-light weight thanks to aluminum housing


Support both toolless mounting and bracket mounting


Built-in input cord with Industrial connector for vertical PDU


Low-profile in depth, more convenience for equipment installation
User-friendly and simple Web interface and LCD screen


Support network port , easy for data communication


Field-replaceable control module, easy for maintenance
 
Product Benefits

Single input power source

Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections. Rack-Mountable

Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.  
Remote Management Capabilities

Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements. Local Current Monitoring Display

The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)  
Load indicator LED

Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.


Flash Upgradeable

Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. Alarm Thresholds

Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.  

EPDU1232M Technical Specification Electrical Nominal Voltage 400VAC, 3PH Input Circuit 32A, 3phase Input Frequency 50/60Hz Input Connector IEC 309 32A 3P+N+E Input Cord Length 2m Output Voltage 200-240VAC, 1PH Output Receptacles ( 18 ) C13 ( 6 ) C19 Circuit Breakers 6X 16A 1-pole hydraulic-magnetic circuit breakers Physical Mount Style Vertical Width 62mm Height 1506mm Depth 44.4mm Housing Material Aluminum extrusion Tool-less Mounting Yes Colour Black User Interface Local User Interface LCD Display, Language: English Local User Control 2 Buttons for scroll/select/Reset Communication I/O 1 Network Port, 1 Temperature/Humidity Port Remote Management Capabilities http/https, SNMP V1, V2, V3 Environmental Operating Temperature -5oC to +45oC Operating Humidity 5-95%RH, non-condensing Elevation Operating/Storage 0–3000m / 0–15000m Regulatory EMC CE, followed by standard EN55035, EN55032, EN55024 Safety CE, TUV, followed by standard EN/IEC62368-1 Environment RoHS, REACH Package Rack Mounting Brackets M5x10mm, self-tapping screw (4pcs), L type bracket 2pcs (screw included) Safety Sheet Included Installations Instructions Included Package Dimensions 1660*160*110mm Weight/Shipping Weight 4.64KG/5.48KG Accessory Part Number EPDU-TH (need to be ordered separately) Warranty Length 1 Year

Easy Metered-by-outlet rack PDU EPDU2116MBO provides detailed energy analysis for individual outlets, enabling better capacity planning and resource allocation. The APC Network Management Card NMC3 provides enhanced cybersecurity with secured interfaces.

The rack PDU integrates with EcoStruxure IT through a Network Management Card (NMC3) and can be accessed and configured via Web, SNMP, and Command Line Interface. EPDU2116MBO is designed for single phase applications of upto 3.7kw and industry standards of 1% metering accuracy.

This comes with IEC 60309 16A 2P+E type inlet, Twenty IEC C13 and four IEC C19 type outlet sockets. It features an ultra-lightweight aluminum housing, offering up to 50% weight reduction, along with environmental monitoring and an all-new improved display module.

Vertical mounting capabilities allow users to mount the units in a rack or enclosure in zero U space without expending valuable rack space This is designed to operate within a temperature range of -5°C to +50°C and is backed by a standard 2-year warranty.

The rack PDU supports daisy-chain of up to 4 PDUs on a single IP address, thereby reducing networking cost. Environmental monitoring ports for external temperature/humidity monitoring is available (sensor sold separately).

Specifications

Main

Colour: Black
Product or component type: PDU
PDU type: Metered outlet
Cord length: 3 m
Number of cables: 1
Provided equipment: Installation guide
Complementary

Input Voltage: 208 V
Dimensions (H x W x D): 1800 mm x 55 mm x 56 mm
Output Voltage: 230 V
Net weight: 6.37 kg
Mounting location: Side
Mounting preference: No preference
Input Plug Type: IEC 60309 16 A 2P + E
Mounting mode: Not rack-mountable
Rack units: 0U
USB compatible: No
Mounting position: Vertical
Communication port protocol: SNMP
[In] rated current: 16 A
Permissible voltage: 200-240 V
Max line current: 16 A
Input current limits: 16 A
Load capacity: 3680 VA
Network frequency: 50/60 Hz
Plug standard: IEC 60309
Outlet type and quantity: 20 IEC 60320 C13
Communication network type: 10/100BASE-T
Environment

Product certifications: CE
Ambient air temperature for operation: -5-50 °C
Relative humidity: 5-95 %
Operating altitude: 0-3000 m
Ambient air temperature for storage: -25-65 °C
Storage Relative Humidity: 5-95 %
Storage altitude: 0-15000 m
Packing Units

Unit Type of Package 1: PCE
Number of Units in Package 1: 1
Package 1 Dimensions (H x W x L): 203 cm x 19.5 cm x 13 cm
Package 1 Weight: 7.54 kg
Contractual warranty

Warranty: 2 Years repair and replace

Easy Metered-by-outlet rack PDU EPDU2132MBO provides detailed energy analysis for individual outlets, enabling better capacity planning and resource allocation. The Network Management Card NMC3 provides enhanced cybersecurity with secured interfaces and modified password policy.

The rack PDU integrates with EcoStruxure IT through a Network Management Card (NMC3) and can be accessed and configured via Web, SNMP, and Command Line Interface. EPDU2132MB is designed for single phase applications of upto 7.4kw and industry standards of 1% metering accuracy.

This comes with IEC 603093 32A 2P+E type inlet, Twenty IEC C13 and four IEC C19 type outlet sockets. It features an ultra-lightweight aluminum housing, offering up to 50% weight reduction, along with environmental monitoring and an all-new improved display module.

Vertical mounting capabilities allow users to mount the units in a rack or enclosure in zero U space without expending valuable rack space This is designed to operate within a temperature range of -5°C to +50°C and is backed by a standard 2-year warranty. The rack PDU supports daisy-chain of up to 4 PDUs on a single IP address, thereby reducing networking cost. Environmental monitoring ports for external temperature/humidity monitoring is available (sensor sold separately).

Specifications

Main

Colour: Black
Product or component type: PDU
PDU type: Metered outlet
Cord length: 3 m
Number of cables: 1
Provided equipment: Installation guide
Complementary

Input Voltage: 200 V
Dimensions (H x W x D): 1800 mm x 55 mm x 56 mm
Output Voltage: 230 V
Net weight: 7.12 kg
Mounting location: Side
Mounting preference: No preference
Input Plug Type: IEC 60309 32 A 2P + E
Mounting mode: Not rack-mountable
Rack units: 0U
USB compatible: No
Mounting position: Vertical
Communication port protocol: SNMP
[In] rated current: 32 A
Permissible voltage: 200-240 V
Max line current: 32 A
Input current limits: 32 A
Load capacity: 7360 VA
Network frequency: 50/60 Hz
Plug standard: IEC 60309
Outlet type and quantity: 20 IEC 60320 C13
Communication network type: 10/100BASE-T
Environment

Product certifications: CE
Ambient air temperature for operation: -5-50 °C
Relative humidity: 5-95 %
Operating altitude: 0-3000 m
Ambient air temperature for storage: -25-65 °C
Storage Relative Humidity: 5-95 %
Storage altitude: 0-15000 m
Packing Units

Unit Type of Package 1: PCE
Number of Units in Package 1: 1
Package 1 Dimensions (H x W x L): 203 cm x 19.5 cm x 13 cm
Package 1 Weight: 8.29 kg
Contractual warranty

Warranty: 2 Years repair and replace

Easy Metered-by-outlet rack PDU EPDU2216MBO provides detailed energy analysis for individual outlets, enabling better capacity planning and resource allocation. The Network Management Card NMC3 provides enhanced cybersecurity with secured interfaces and modified password policy.

The rack PDU integrates with EcoStruxure IT through a Network Management Card (NMC3) and can be accessed and configured via Web, SNMP, and Command Line Interface. EPDU2216MBO is designed for three phase applications of upto 11kw and industry standards of 1% metering accuracy.

This comes with IEC 603093 32A 3P+N+PE type inlet, eighteen IEC C13 and six IEC C19 type outlet sockets. It features an ultra-lightweight aluminum housing, offering up to 50% weight reduction, along with environmental monitoring and an all-new improved display module.

Vertical mounting capabilities allow users to mount the units in a rack or enclosure in zero U space without expending valuable rack space This is designed to operate within a temperature range of -5°C to +50°C and is backed by a standard 2-year warranty.

The rack PDU supports daisy-chain of up to 4 PDUs on a single IP address, thereby reducing networking cost. Environmental monitoring ports for external temperature/humidity monitoring is available (sensor sold separately).

Specifications

Main

Colour: Black
Product or component type: PDU
PDU type: Metered outlet
Cord length: 3 m
Number of cables: 1
Provided equipment: Installation guide
Complementary

Input Voltage: 400 V 3 phases
Dimensions (H x W x D): 1800 mm x 55 mm x 56 mm
Output Voltage: 230 V
Net weight: 6.82 kg
Mounting location: Side
Mounting preference: No preference
Input Plug Type: IEC 60309 16 A 3P + N + PE
Mounting mode: Not rack-mountable
Rack units: 0U
USB compatible: No
Mounting position: Vertical
Communication port protocol: SNMP
[In] rated current: 16 A
Max line current: 16 A
Input current limits: 16 A
Load capacity: 11000 VA
Network frequency: 50/60 Hz
Plug standard: IEC 60309
Outlet type and quantity: 18 IEC 60320 C13 10 A
Communication network type: 10/100BASE-T
Environment

Product certifications: CE
Ambient air temperature for operation: -5-50 °C
Relative humidity: 5-95 %
Operating altitude: 0-3000 m
Ambient air temperature for storage: -25-65 °C
Storage Relative Humidity: 5-95 %
Storage altitude: 0-15000 m
Packing Units

Unit Type of Package 1: PCE
Number of Units in Package 1: 1
Package 1 Dimensions (H x W x L): 203 cm x 19.5 cm x 13 cm
Package 1 Weight: 7.99 kg
Logistical informations

Country of origin: CN
Contractual warranty

Warranty: 2 Years repair and replace

Easy Metered-by-outlet rack PDU EPDU2232MBO provides detailed energy analysis for individual outlets, enabling better capacity planning and resource allocation. The Network Management Card NMC3 provides enhanced cybersecurity with secured interfaces and modified password policy.

The rack PDU integrates with EcoStruxure IT through a Network Management Card (NMC3) and can be accessed and configured via Web, SNMP, and Command Line Interface. EPDU2232MBO is designed for three phase applications of upto 22kw and industry standards of 1% metering accuracy.

This comes with IEC 603093 32A 3P+N+PE type inlet, eighteen IEC C13 and six IEC C19 type outlet sockets. It features an ultra-lightweight aluminum housing, offering up to 50% weight reduction, along with environmental monitoring and an all-new improved display module.

Vertical mounting capabilities allow users to mount the units in a rack or enclosure in zero U space without expending valuable rack space This is designed to operate within a temperature range of -5°C to +50°C and is backed by a standard 2-year warranty.

The rack PDU supports daisy-chain of up to 4 PDUs on a single IP address, thereby reducing networking cost. Environmental monitoring ports for external temperature/humidity monitoring is available (sensor sold separately).

Specifications

<Main

Colour: Black
Product or component type: PDU
PDU type: Metered outlet
Cord length: 3 m
Number of cables: 1
Provided equipment: Installation guide
Complementary

Input Voltage: 400 V 3 phases
Dimensions (H x W x D): 1800 mm x 55 mm x 56 mm
Output Voltage: 230 V
Net weight: 8.38 kg
Mounting location: Side
Mounting preference: No preference
Input Plug Type: IEC 60309 32 A 3P + N + PE
Mounting mode: Not rack-mountable
Rack units: 0U
USB compatible: No
Mounting position: Vertical
Communication port protocol: SNMP
[In] rated current: 32 A
Max line current: 32 A
Input current limits: 32 A
Load capacity: 22000 VA
Network frequency: 50/60 Hz
Plug standard: IEC 60309
Outlet type and quantity: 18 IEC 60320 C13 10 A
Communication network type: 10/100BASE-T
Environment

Product certifications: TÜV
Ambient air temperature for operation: -5-50 °C
Relative humidity: 5-95 %
Operating altitude: 0-3000 m
Ambient air temperature for storage: -25-65 °C
Storage Relative Humidity: 5-95 %
Storage altitude: 0-15000 m
Packing Units

Unit Type of Package 1: PCE
Number of Units in Package 1: 1
Package 1 Dimensions (H x W x L): 203 cm x 19.5 cm x 13 cm
Package 1 Weight: 9.55 kg
Contractual warranty

Warranty: 2 Years repair and replace