APC PDU Accessories

APC NetShelter Cable Management, Easy rack PDU Mounting bracket

Set of 2, Black

Cord retention brackets and vertical-mount bracket kits to complete rack power distribution solutions.


Installation Use the toolless mounting pegs to install the bracket to the rack. Place the pegs through the mounting holes as shown in the illustration and push the bracket down so the pegs sit in the bottom part of the mounting hole which is smaller than the top in order to secure the pegs in place.


An installation guide can be found in the Installation Guide PDF file

Bracket Kit, Zero U PDU, HP

Cord retention brackets and vertical-mount bracket kits to complete rack power distribution solutions

Technical Specification

Net Weight 0.41KG Shipping Weight 0.55KG Shipping Height
Shipping Width
Shipping Depth 44MM, 4.4CM
235MM, 23.5CM
165MM, 16.5CM Maximum Height
Maximum Width
Maximum Depth 70MM, 7.0CM
114MM, 11.4CM
19MM, 1.9CM Color Black

Rack PDU Red label kit Quantity: 10 units

Unique colors, input cord plugs and outlet configurations done simply and delivered to specification.

Local Current Monitoring Display

The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)

Network Management Capabilities

Full-featured network management interfaces that provide standards-based management via Web and SNMP. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time.

Metering-by-Outlet capability

Individual outlet level power metering provides a more granular view of the power distributed to equipment within the enclosure. It also provides the ability to analyze component power trends and perform capacity planning.

Remote Individual Outlet Control

Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).

Outlet Power Sequencing

Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.

Load indicator LED

overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits. (Note: Only available with units with local current monitoring feature)

Flash Upgradeable

Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)

Alarm Thresholds

Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.

Single input power source

Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.

Rack PDU Blue label kit: Quantity 10 units

Unique colors, input cord plugs and outlet configurations done simply and delivered to specification.

Local Current Monitoring Display

The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)

Network Management Capabilities

Full-featured network management interfaces that provide standards-based management via Web and SNMP. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time.

Metering-by-Outlet capability

Individual outlet level power metering provides a more granular view of the power distributed to equipment within the enclosure. It also provides the ability to analyze component power trends and perform capacity planning.

Remote Individual Outlet Control

Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).

Outlet Power Sequencing

Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.

Load indicator LED

overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits. (Note: Only available with units with local current monitoring feature)

Flash Upgradeable

Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)

Alarm Thresholds

Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.

Single input power source

Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.

Bracket Kit, PDU, Horizontal to Vertical Mount

Cord retention brackets and vertical-mount bracket kits to complete rack power distribution solutions

Includes: (2) Brackets, Installation guide, Mounting hardware

Technical Specification

Net Weight 0.18KG Shipping Weight 0.34KG Shipping Height 44MM, 4.4CM Shipping Width 235MM, 23.5CM Shipping Depth 165MM, 16.5CM Color Black

Bracket Kit, 0U PDU, Compaq/Dell

Cord retention brackets and vertical-mount bracket kits to complete rack power distribution solutions

Includes: Installation guide, Mounting hardware, Rack mounting brackets

Mounting provisions for vertical power distribution

Mount up to four vertical rack PDUs on one side.

APC Easy Rack PDU

Temperature & Humidity Sensor

Easy Rack PDU environmental sensor that monitors temperature and humidity in your Data Center or Network Closet.


Installation 1. Peel the backing off one side of the double-sided mounting tape.

2. Apply the mounting tape to the back of the sensor.

3. Peel the backing off the other side of the mounting tape and press the sensor to the chosen location.

4. Route the cable to your monitoring appliance.

5. Use cable ties (not provided) to secure the cable.

6. Connect the RJ45 connector on the end of the sensor’s cable to the appropriate port of the monitoring appliance.

 
An installation guide can be found in the Installation Guide PDF file

Cord Retention Bracket for Basic Rack PDUs

Cord retention brackets and vertical-mount bracket kits to complete rack power distribution solutions

Technical Specification

Net Weight 0.99lbs. (0.45KG) Shipping Weight 1.5lbs. (0.68KG) Shipping Height
Shipping Width
Shipping Depth 2.52 inches (64MM, 6.4CM)
18.62 inches (473MM, 47.3CM)
3.74 inches (95MM, 9.5CM) Maximum Height
Maximum Width
Maximum Depth 1.61 inches (41MM, 4.1CM)
17.52 inches (445MM, 44.5CM)
3.27 inches (83MM, 8.3CM) Color Black