Please Email Customer Service
X
Forgotten Password?
Retry
Login
loading Gif
Sorry! You can't edit your cart on this page.
Sorry! This item could not be added to your cart as it is no longer available from Comms Express.
Please check the quantity you are adding and try again.
The following item has been added to your cart.
Product Code:
Options:
Qty:
Unit Price:£
View Cart
Checkout
Your cart is empty.
Subtotal:
£0
Remove all items from cart
Are you sure? Yes No
Learn more about how
to collect Data Points
for free gifts.
Comms Express Finance Options
Request A Quote
View Cart
Checkout
Cookie Policy×

Hi there! Our website may store cookies on your computer in order to give you the best experience, such as remembering the items in your cart so you can continue shopping where you left off.

By continuing to use our site, you give consent for cookies to be used.

Browse Categories
Express Finder Logo
Express PDU Finder
Select requirements to view suitable PDUs instantly from our entire range.
Reset
More Info
APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power cycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing time delays allow users to define the order in which to power up or down attached equipment to avoid circuit overload. Current metering provides real-time remote monitoring of connected loads with user-defined alarms to warn of potential circuit overloads
APC AP7920B Rack PDU
APC Logo

Rack PDU, Switched, 1U, 12A/208V, 10A/230V, (8)C13

The APC by Schneider Electric Rack Power Distribution Unit (PDU) may be used as a stand-alone, network manageable power distribution device or up to four devices can be connected together using one network connection. The Rack PDU provides real-time remote monitoring of connected loads. User-defined alarms warn of potential circuit overloads. The Rack PDU provides full control over outlets through remote commands
and user interface settings.

Your Rack PDU comes with a terminator installed in the display In or Out port. In stand-alone operation of Switched Rack PDU models, one terminator must be installed in the display In or Out port. To use Network Port Sharing between up to four units, a terminator must be installed in the In port at one end of the group and another on the Out port at the other end of the group.

You can manage a Rack PDU through its web interface (UI), its command line interface (CLI), StruxureWare, or Simple Network Management Protocol (SNMP). (To use the PowerNet MIB with an SNMP browser, see the PowerNet SNMP Management Information Base (MIB) Reference Guide, available at www.apc.com 

Rack PDUs have these additional features:

Device power, peak power, apparent power, power factor and energy.
Phase voltage, current, peak current, power, apparent power and power factor.
Bank current and peak current (for models that support breaker banks).
Configurable alarm thresholds that provide network and visual alarms to help avoid overloaded circuits.
Various levels of access: Super User, Administrator, Device User, Read-Only, Outlet User, and Network-Only User (These are protected by user name and password requirements).
Multiple user login feature which allows up to four users to be logged in simultaneously.
Individual outlet control.
Configurable power delays.
Event and data logging. The event log is accessible by Telnet, Secure CoPy (SCP), File Transfer Protocol (FTP), serial connection, or web browser (using HTTPS access with SSL, or using HTTP access). The data log is accessible by web browser, SCP, or FTP.
E-mail notifications for Rack PDU and Network Management Card (NMC) system events.
SNMP traps, Syslog messages, and e-mail notifications based on the severity level or category of the Rack PDU and NMC system event.
Security protocols for authentication and encryption.
Network Port Sharing (NPS). Up to four Rack PDUs of any model can be connected using the In and Out ports so that only one network connection is necessary.
NPS guest firmware auto-update feature allows the NPS host to automatically pass a firmware update to its connected guests. This feature will be functional for all guests that have AOS firmware version 6.1.3 or later.
RF Code wireless monitoring support via serial port connection
Cisco EnergyWise certified.
NOTE: The Rack PDU does not provide power surge protection. To ensure that the device is protected from power failure or power surges, connect the Rack PDU to a Schneider Electric Uninterruptible Power Supply (UPS).

Includes:
Installation Guide
Rack Mounting Brackets
User Manual
Features & Benefits
Agility

Rack-Mountable - Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.
Single input power source - Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.
Wide range of input and output connections - Product family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4kW using a single branch whip.
Availability

Alarm Thresholds - Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability)
Network Management Capabilities - Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.
Remote Individual Outlet Control - Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).
Local Current Monitoring Display - The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)
Power Delays - Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.
Load indicator LED - Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.
Flash Upgradeable - Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)
Integrates with StruxureWare Data Center Expert - An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network
 

APC Warranties available for this PDU APC Service Pack Warranty Extension
(New Product Purchases)


APC Service Pack Warranty Extension
(Renewal or High Volume)


                          FEWBEXTWAR1YR-AC-02                                                             FEWEXWAR1Y-AC-02

Protection for your system, peace of mind for you
- With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it.

Express View Logo
In Stock: Next Day
£530.98
£637.18 Inc Vat
APC AP7921B Rack PDU
APC Logo

Rack PDU, Switched, 1U, 16A, 208/230V, (8)C13

Switched Rack Power Distribution Units (PDUs) provide advanced load monitoring combined with remote on/off switching control of individual outlets for power cycling, delayed power sequencing, and outlet use management.

Includes:
Installation Guide
Rack Mounting Brackets
User Manual
Features & Benefits
Agility

Rack-Mountable - Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.
Single input power source - Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.
Wide range of input and output connections - Product family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4kW using a single branch whip.
Availability

Alarm Thresholds - Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability)
Network Management Capabilities - Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.
Remote Individual Outlet Control - Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).
Local Current Monitoring Display - The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)
Power Delays - Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.
Load indicator LED - Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.
Flash Upgradeable - Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)
Integrates with StruxureWare Data Center Expert - An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network
 

APC Warranties available for this PDU APC Service Pack Warranty Extension
(New Product Purchases)


APC Service Pack Warranty Extension
(Renewal or High Volume)


                          FEWBEXTWAR1YR-AC-02                                                             FEWEXWAR1Y-AC-02

Protection for your system, peace of mind for you
- With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it.

Express View Logo
In Stock: Next Day
£610.42
£732.50 Inc Vat
APC Switched Rack PDU 2G, 16A, 230V, (7)C13 & (1)C19, IEC309 Cord
APC Logo
APC Switched Rack PDU 2G, 16A, 230V, (7)C13 & (1)C19, IEC309 Cord

The AP8958EU3 Rack PDU platform will help IT and facilities managers more effectively manage power capacity and functionality for critical network, server, and data centre equipment. The Switched Rack PDUs provide advanced load monitoring combined with remote on/off switching control of individual outlets for power cycling, delayed power sequencing and outlet use management and solve rack-level power needs while incorporating intelligent features such as real power measurement and environmental monitoring, all in a space efficient, zero-U form factor. AP8000 Series Rack PDUs include active power metering and remote alarming with volts, amps, real power (kW), and energy (kWh) measurements.

The AP8958EU3 has seven (7) IEC-C13, one (1) C19 outlets and one (1) IEC309 16A  input








Features:

1. User Interface display for local access

2. Environmental monitoring port for external temperature/humidity probe

3. Local USB port for flash firmware updates and downloading data/event logs (not to be used as serial port)

4. CAN In/Out ports for network port sharing

5. 7 x IEC320 C13 & 1 x IEC320 C19 Outlets

6. 3 metre power cord terminates with an IEC309 16A input connector.












Design Features:

Ultra-low-profile, space-saving design
Locking IEC receptacles and locking power cord compatible
Environmental monitoring port for external temperature/humidity monitoring
Network Management Capabilities:
Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.
Network Port Sharing (Up to four rack PDUs share one IP address in one enclosure)
Remote Individual Outlet Control:
Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).
Alarm Thresholds:
Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.
Power Delays:
Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.
Local Current Monitoring Display:
The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip.
Metering Capability:
Active current measurements (amps)
Active power measurements (Including volts, amps, real power (kW), and energy (kWh)
User customizable alarms and warnings
Embedded log memory to record/review/report historic metered data
Flash Upgradeable: Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)
Integrates with StruxureWare Data Center Expert:
An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network
Includes: Installation guide, Rack Mounting brackets, Safety guide, Serial configuration cable

Express View Logo
In Stock: Next Day
£771.76
£926.11 Inc Vat
APC Switched Rack PDU 2G, 20A 208V, 16A 230V, (7)C13 & (1)C19
APC Logo
APC Switched Rack PDU 2G, Zero U, 20A/208V, 16A/230V, (7)C13 & (1)C19

The AP8958 Rack PDU platform will help IT and facilities managers more effectively manage power capacity and functionality for critical network, server, and data centre equipment. The Switched Rack PDUs provide advanced load monitoring combined with remote on/off switching control of individual outlets for power cycling, delayed power sequencing and outlet use management and solve rack-level power needs while incorporating intelligent features such as real power measurement and environmental monitoring, all in a space efficient, zero-U form factor. AP8000 Series Rack PDUs include active power metering and remote alarming with volts, amps, real power (kW), and energy (kWh) measurements.

The AP8958 has seven (7) IEC-C13, one (1) C19 outlets and one (1) IEC-C20 input








Features:

1. User Interface display for local access

2. Environmental monitoring port for external temperature/humidity probe

3. Local USB port for flash firmware updates and downloading data/event logs (not to be used as serial port)

4. CAN In/Out ports for network port sharing

5. 7 x IEC320 C13 & 1 x IEC320 C19 Outlets

6. IEC320 C20 input connector.












Design Features:

Ultra-low-profile, space-saving design
Locking IEC receptacles and locking power cord compatible
Environmental monitoring port for external temperature/humidity monitoring
Network Management Capabilities:
Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.
Network Port Sharing (Up to four rack PDUs share one IP address in one enclosure)
Remote Individual Outlet Control:
Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).
Alarm Thresholds:
Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.
Power Delays:
Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.
Local Current Monitoring Display:
The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip.
Metering Capability:
Active current measurements (amps)
Active power measurements (Including volts, amps, real power (kW), and energy (kWh)
User customizable alarms and warnings
Embedded log memory to record/review/report historic metered data
Flash Upgradeable: Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)
Integrates with StruxureWare Data Center Expert:
An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network
Includes: Installation guide, Rack Mounting brackets, Safety guide, Serial configuration cable
   

APC Warranties available for this PDU APC Service Pack Warranty Extension
(New Product Purchases)


APC Service Pack Warranty Extension
(Renewal or High Volume)


                          FEWBEXTWAR1YR-AC-03                                                             FEWEXWAR1Y-AC-03

Protection for your system, peace of mind for you
- With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it.

Express View Logo
In Stock: Next Day
£770.82
£924.98 Inc Vat
APC Switched Rack PDU 2G, 20A 208V, 16A 230V, (21)C13 & (3)C19
APC Logo
APC Switched Rack PDU 2G, 20A/208V, 16A/230V, (21)C13 & (3)C19

The AP8959 Rack PDU platform will help IT and facilities managers more effectively manage power capacity and functionality for critical network, server, and data centre equipment. The Switched Rack PDUs provide advanced load monitoring combined with remote on/off switching control of individual outlets for power cycling, delayed power sequencing and outlet use management and solve rack-level power needs while incorporating intelligent features such as real power measurement and environmental monitoring, all in a space efficient, zero-U form factor. AP8000 Series Rack PDUs include active power metering and remote alarming with volts, amps, real power (kW), and energy (kWh) measurements.

The AP8959 has twenty one (21) IEC-C13, three (3) C19 outlets and one (1) IEC-C20 input








Features:

1. User Interface display for local access

2. Environmental monitoring port for external temperature/humidity probe

3. Local USB port for flash firmware updates and downloading data/event logs (not to be used as serial port)

4. CAN In/Out ports for network port sharing

5. 21 x IEC320 C13 & 3 x IEC320 C19 Outlets

6. IEC320 C20 input connector.












Design Features:

Ultra-low-profile, space-saving design
Locking IEC receptacles and locking power cord compatible
Environmental monitoring port for external temperature/humidity monitoring
Network Management Capabilities:
Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.
Network Port Sharing (Up to four rack PDUs share one IP address in one enclosure)
Remote Individual Outlet Control:
Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).
Alarm Thresholds:
Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.
Power Delays:
Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.
Local Current Monitoring Display:
The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip.
Metering Capability:
Active current measurements (amps)
Active power measurements (Including volts, amps, real power (kW), and energy (kWh)
User customizable alarms and warnings
Embedded log memory to record/review/report historic metered data
Flash Upgradeable: Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)
Integrates with StruxureWare Data Center Expert:
An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network
Includes: Installation guide, Rack Mounting brackets, Safety guide, Serial configuration cable

 

APC Warranties available for this PDU APC Service Pack Warranty Extension
(New Product Purchases)


APC Service Pack Warranty Extension
(Renewal or High Volume)


                          FEWBEXTWAR1YR-AC-03                                                             FEWEXWAR1Y-AC-03

Protection for your system, peace of mind for you
- With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it.

Express View Logo
In Stock: Next Day
£857.48
£1028.98 Inc Vat
APC Switched Rack PDU 2G, 16A, 230V, (21)C13 & (3)C19, IEC309 Cord
APC Logo
APC Switched Rack PDU 2G, 16A, 230V, (21)C13 & (3)C19, IEC309 Cord

The AP8959EU3 Rack PDU platform will help IT and facilities managers more effectively manage power capacity and functionality for critical network, server, and data centre equipment. The Switched Rack PDUs provide advanced load monitoring combined with remote on/off switching control of individual outlets for power cycling, delayed power sequencing and outlet use management and solve rack-level power needs while incorporating intelligent features such as real power measurement and environmental monitoring, all in a space efficient, zero-U form factor. AP8000 Series Rack PDUs include active power metering and remote alarming with volts, amps, real power (kW), and energy (kWh) measurements.

The AP8959EU3 has twenty one (21) IEC-C13, three (3) C19 outlets and one (1) IEC309 16A  input








Features:

1. User Interface display for local access

2. Environmental monitoring port for external temperature/humidity probe

3. Local USB port for flash firmware updates and downloading data/event logs (not to be used as serial port)

4. CAN In/Out ports for network port sharing

5. 21 x IEC320 C13 & 3 x IEC320 C19 Outlets

6. 3 metre power cord terminates with an IEC309 16A input connector.












Design Features:

Ultra-low-profile, space-saving design
Locking IEC receptacles and locking power cord compatible
Environmental monitoring port for external temperature/humidity monitoring
Network Management Capabilities:
Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.
Network Port Sharing (Up to four rack PDUs share one IP address in one enclosure)
Remote Individual Outlet Control:
Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).
Alarm Thresholds:
Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.
Power Delays:
Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.
Local Current Monitoring Display:
The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip.
Metering Capability:
Active current measurements (amps)
Active power measurements (Including volts, amps, real power (kW), and energy (kWh)
User customizable alarms and warnings
Embedded log memory to record/review/report historic metered data
Flash Upgradeable: Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)
Integrates with StruxureWare Data Center Expert:
An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network
Includes: Installation guide, Rack Mounting brackets, Safety guide, Serial configuration cable
   

APC Warranties available for this PDU APC Service Pack Warranty Extension
(New Product Purchases)


APC Service Pack Warranty Extension
(Renewal or High Volume)


                           FEWBEXTWAR1YR-AC-03                                                             FEWEXWAR1Y-AC-03

Protection for your system, peace of mind for you
- With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it.

Express View Logo
In Stock: Next Day
£819.98
£983.98 Inc Vat
APC Switched Rack PDU 2G, 32A, 230V, (21)C13 & (3)C19
APC Logo
APC Switched Rack PDU 2G, 32A, 230V, (21)C13 & (3)C19

The AP8953 Rack PDU platform will help IT and facilities managers more effectively manage power capacity and functionality for critical network, server, and data centre equipment. The Switched Rack PDUs provide advanced load monitoring combined with remote on/off switching control of individual outlets for power cycling, delayed power sequencing and outlet use management and solve rack-level power needs while incorporating intelligent features such as real power measurement and environmental monitoring, all in a space efficient, zero-U form factor. AP8000 Series Rack PDUs include active power metering and remote alarming with volts, amps, real power (kW), and energy (kWh) measurements.

The AP8953 has twenty one (21) IEC-C13, three (3) C19 outlets and one (1) IEC 309 32A input








Features:

1. User Interface display for local access

2. Environmental monitoring port for external temperature/humidity probe

3. Local USB port for flash firmware updates and downloading data/event logs (not to be used as serial port)

4. CAN In/Out ports for network port sharing

5. 21 x IEC320 C13 & 3 x IEC320 C19 Outlets

6. 3 metre power cord terminates with an IEC309 32A input connector.












Design Features:

Ultra-low-profile, space-saving design
Hydraulic-magnetic circuit breakers
Ultra-low-profile circuit breakers
Locking IEC receptacles and locking power cord compatible
Environmental monitoring port for external temperature/humidity monitoring
Network Management Capabilities:
Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.
Network Port Sharing (Up to four rack PDUs share one IP address in one enclosure)
Remote Individual Outlet Control:
Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).
Alarm Thresholds:
Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.
Power Delays:
Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.
Local Current Monitoring Display:
The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip.
Metering Capability:
Active current measurements (amps)
Active power measurements (Including volts, amps, real power (kW), and energy (kWh)
User customizable alarms and warnings
Embedded log memory to record/review/report historic metered data
Flash Upgradeable: Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)
Integrates with StruxureWare Data Center Expert:
An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network
Includes: Installation guide, Rack Mounting brackets, Safety guide, Serial configuration cable

 

APC Warranties available for this PDU APC Service Pack Warranty Extension
(New Product Purchases)


APC Service Pack Warranty Extension
(Renewal or High Volume)


                          FEWBEXTWAR1YR-AC-03                                                             FEWEXWAR1Y-AC-03

Protection for your system, peace of mind for you
- With the APC Extended Warranty program, you will have peace of mind knowing that in the unlikely event of a failure, your product will be repaired or replaced quickly, minimizing downtime.

Our warranty guarantees free next business day delivery of parts or unit to ensure you get what you need as soon as you need it.

Express View Logo
In Stock: Next Day
£913.31
£1095.97 Inc Vat
APC AP7922B Rack PDU, Switched, 2U, 32A, 230V, (16)C13
APC Logo

Rack PDU, Switched, 2U, 32A, 230V, (16)C13

Switched Rack Power Distribution Units (PDUs) provide advanced load monitoring combined with remote on/off switching control of individual outlets for power cycling, delayed power sequencing, and outlet use management.

Includes:
Documentation CD
Installation Guide
Rack Mounting Brackets
Features & Benefits
Agility

Rack-Mountable - Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.
Single input power source - Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.
Wide range of input and output connections - Product family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4kW using a single branch whip.
Availability

Alarm Thresholds - Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability)
Network Management Capabilities - Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.
Remote Individual Outlet Control - Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).
Local Current Monitoring Display - The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)
Power Delays - Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.
Load indicator LED - Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.
Flash Upgradeable - Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)
Integrates with StruxureWare Data Center Expert - An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network

Express View Logo
In Stock: Next Day
£821.64
£985.97 Inc Vat
APC Logo

Switched Rack Power Distribution Units (PDUs) provide advanced load monitoring combined with remote on/off switching control of individual outlets for power cycling, delayed power sequencing, and outlet use management.

Includes : Cord Retention Bracket(s) , Installation Guide , Rack Mounting Brackets , Toolless Mounting Kit , User Manual



Flash Upgradeable - Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)
Remote Management Capabilities - Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.

Express View Logo
In Stock: 1-2 Weeks
£916.03
£1099.24 Inc Vat
APC Rack PDU 2G, Switched, ZeroU, 11kW, 230V, (21) C13 & (3) C19
APC Logo
APC Rack PDU 2G, Switched, ZeroU, 11kW, 230V, (21) C13 & (3) C19

The AP8981 Rack PDU platform will help IT and facilities managers more effectively manage power capacity and functionality for critical network, server, and data centre equipment. The Switched Rack PDUs provide advanced load monitoring combined with remote on/off switching control of individual outlets for power cycling, delayed power sequencing and outlet use management and solve rack-level power needs while incorporating intelligent features such as real power measurement and environmental monitoring, all in a space efficient, zero-U form factor. AP8000 Series Rack PDUs include active power metering and remote alarming with volts, amps, real power (kW), and energy (kWh) measurements.

The AP8981 3 Phase PDU has twenty one (21) IEC-C13, three (3) C19 outlets and one (1) IEC-309 16A input








Features:

1. User Interface display for local access

2. Environmental monitoring port for external temperature/humidity probe

3. Local USB port for flash firmware updates and downloading data/event logs (not to be used as serial port)

4. CAN In/Out ports for network port sharing

5. 21 x IEC320 C13 & 3 x IEC320 C19 Outlets

6. 1.8 metre power cord terminates with an IEC309 16A 5 pin input connector.












Design Features:

Ultra-low-profile, space-saving design
Locking IEC receptacles and locking power cord compatible
Environmental monitoring port for external temperature/humidity monitoring
Network Management Capabilities:
Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.
Network Port Sharing (Up to four rack PDUs share one IP address in one enclosure)
Remote Individual Outlet Control:
Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).
Alarm Thresholds:
Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.
Power Delays:
Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.
Local Current Monitoring Display:
The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip.
Metering Capability:
Active current measurements (amps)
Active power measurements (Including volts, amps, real power (kW), and energy (kWh)
User customizable alarms and warnings
Embedded log memory to record/review/report historic metered data
Flash Upgradeable: Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)
Integrates with StruxureWare Data Center Expert:
An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network
Includes: Installation guide, Rack Mounting brackets, Safety guide, Serial configuration cable


Express View Logo
In Stock: 1-2 Weeks
£1094.98
£1313.98 Inc Vat
APCAPDU9941
APC Logo
ZeroU, 30A, 200/208V, (21) C13/C15 & (3) C19/C21

Overview With Industry leading reliability, manageability, and security, APC Switched Rack PDU's provide advanced load management plus on/off outlet level power cycling and sequencing control.

Includes Installation guide
Rack mounting brackets
Safety guide
Gigabit Ethernet Connectivity 9000 series PDUs provide Gigabit Ethernet to enhance and standardize network connectivity across all assets in the data center. All other models provide 10/100 ethernet connectivity.

Alarm Thresholds Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.

1% Metering Accuracy Providing the same level of accuracy as a utility company meter by adhering to IEC 62053-21 class 1, 1% metering accuracy provides peace of mind to use these PDUs to bill based on power usage. In addition, the higher level of accuracy ensures the most precise measures for capacity planning and threshold alarm monitoring. Available on 9000 series PDUs.

Enhanced Cybersecurity 9000 series PDUs include APC Network Management card with security features including secured interfaces and a modified password policy providing peace of mind.

Network Management Capabilities Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.

Network Port Sharing Connect and manage multiple PDUs from one IP address to simplify and speed deployment while saving the cost required in having a dedicated network connection for each PDU. Manage up to 32 PDUs with 9000 series and up to 4 PDUs with 8000 series.

Gigabit Ethernet Connectivity 9000 series PDUs provide Gigabit Ethernet to enhance and standardize network connectivity across all assets in the data center. All other models provide 10/100 ethernet connectivity.

Multi-tier user access Supports up to four access levels - Administrator, Device User, Read-Only User and Network-only User - with user name and password requirements.

Alarm Thresholds Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.

EcoStruxure IT Ready Seamless integration of one or many PDUs including alerts and control with EcoStruxure IT. Allows IT and data center professionals to monitor and manage all of their critical IT infrastructure on-premise, in the cloud, and at the edge from anywhere.

Outlet Level Grouping Outlet power sequencing can be configured to group any combination of outlets to power up or down together providing flexibility.

Hydraulic Magnetic Circuit Breakers Provide increased availability by maintaining trip current over a wide temperature range.

High Retention Outlets With no special power cords required, high retention outlets provide up to twice the holding force to reduce risk of accidental disconnect on 9000 series PDUs.

60C Operating Temperature 9000 series PDUs provide the ability to operate in a maximum ambient air temperature of 60C (140F) at full load ensuring reliability and availability even in today's high density deployments. Other models allow up to 45C (113F).

Field-replaceable NMC Integrated Network Management Card/Display Module can be replaced in the field to minimize downtime disruption in the unlikely event of a failure.

C13/C15 and C19/C21 Hybrid Outlets Available on select 9000 series PDUs only, Industry 1st hybrid outlets allow 60C operating temperature at full load, are fully compatible with standard C14 and C20 power cords, and are future proofed for implementation of higher temperature rated devices requiring C16 and C21 power cords.

Flash Upgradeable Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only).

Wireless Connectivity Compatible with the optional APC USB WiFi Device for cableless connectivity over WiFi that speeds deployment and simplifies moves, adds, and changes (9000 Series PDUs only - expected to be available on units manufactured after March 2021).

Rack-Mountable Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.

Single input power source Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.

Wide range of input and output connections Product family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements. APC offers units that bring up to 17.3kW using a single branch whip.

Express View Logo
In Stock: 1-2 Weeks
£861.15
£1033.38 Inc Vat
APCAPDU9953
APC Logo
ZeroU, 32A, 230V, (21) C13 & (3) C19

Overview With Industry leading reliability, manageability, and security, APC Switched Rack PDU's provide advanced load management plus on/off outlet level power cycling and sequencing control.

Includes Installation guide
Rack mounting brackets
Safety guide
Serial configuration cable
Alarm Thresholds Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.

1% Metering Accuracy Providing the same level of accuracy as a utility company meter by adhering to IEC 62053-21 class 1, 1% metering accuracy provides peace of mind to use these PDUs to bill based on power usage. In addition, the higher level of accuracy ensures the most precise measures for capacity planning and threshold alarm monitoring. Available on 9000 series PDUs.

Enhanced Cybersecurity 9000 series PDUs include APC Network Management card with security features including secured interfaces and a modified password policy providing peace of mind.

Network Management Capabilities Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.

Network Port Sharing Connect and manage multiple PDUs from one IP address to simplify and speed deployment while saving the cost required in having a dedicated network connection for each PDU. Manage up to 32 PDUs with 9000 series and up to 4 PDUs with 8000 series.

Gigabit Ethernet Connectivity 9000 series PDUs provide Gigabit Ethernet to enhance and standardize network connectivity across all assets in the data center. All other models provide 10/100 ethernet connectivity.

Multi-tier user access Supports up to four access levels - Administrator, Device User, Read-Only User and Network-only User - with user name and password requirements.

Alarm Thresholds Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.

EcoStruxure IT Ready Seamless integration of one or many PDUs including alerts and control with EcoStruxure IT. Allows IT and data center professionals to monitor and manage all of their critical IT infrastructure on-premise, in the cloud, and at the edge from anywhere.

Outlet Level Grouping Outlet power sequencing can be configured to group any combination of outlets to power up or down together providing flexibility.

Hydraulic Magnetic Circuit Breakers Provide increased availability by maintaining trip current over a wide temperature range.

High Retention Outlets With no special power cords required, high retention outlets provide up to twice the holding force to reduce risk of accidental disconnect on 9000 series PDUs.

60C Operating Temperature 9000 series PDUs provide the ability to operate in a maximum ambient air temperature of 60C (140F) at full load ensuring reliability and availability even in today's high density deployments. Other models allow up to 45C (113F).

Field-replaceable NMC Integrated Network Management Card/Display Module can be replaced in the field to minimize downtime disruption in the unlikely event of a failure.

C13/C15 and C19/C21 Hybrid Outlets Available on select 9000 series PDUs only, Industry 1st hybrid outlets allow 60C operating temperature at full load, are fully compatible with standard C14 and C20 power cords, and are future proofed for implementation of higher temperature rated devices requiring C16 and C21 power cords.

Flash Upgradeable Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only).

Wireless Connectivity Compatible with the optional APC USB WiFi Device for cableless connectivity over WiFi that speeds deployment and simplifies moves, adds, and changes (9000 Series PDUs only - expected to be available on units manufactured after March 2021).

Rack-Mountable Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.

Single input power source Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.

Wide range of input and output connections Product family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements. APC offers units that bring up to 17.3kW using a single branch whip.

Express View Logo
In Stock: Next Day
£835.58
£1002.70 Inc Vat
APCAPDU9959EU3
APC Logo
ZeroU, 16A, 230V, (21) C13 & (3) C19, IEC309 Cord

APC APDU9959EU3 Rack PDU 9000 Switched, ZeroU, 16A, 230V, (21) C13 & (3) C19, IEC309 Cord

Express View Logo
In Stock: Next Day
£771.32
£925.58 Inc Vat
APCAPDU9959J
APC Logo
ZeroU, 16A, 100-240V, (21) C13/C15 & (3) C19/C21

APC APDU9959J Rack PDU 9000 Switched, ZeroU, 16A, 100-240V, (21) C13/C15 & (3) C19/C21, Japan

Express View Logo
In Stock: 1-2 Weeks
£770.30
£924.36 Inc Vat
APCAPDU9959NA3
APC Logo
ZeroU, 20A, 208V, (21) C13/C15 & (3) C19/C21, L620 Cord

APC APDU9959NA3 Rack PDU 9000 Switched, ZeroU, 20A, 208V, (21) C13/C15 & (3) C19/C21, L620 Cord

Express View Logo
In Stock: 1-2 Weeks
£813.83
£976.60 Inc Vat
APCAPDU9961
APC Logo
ZeroU, 5.7kW, 200/208V, (21) C13/C15 & (3) C19/C21

APC APDU9961 Rack PDU 9000 Switched, ZeroU, 5.7kW, 200/208V, (21) C13/C15 & (3) C19/C21

Express View Logo
In Stock: 1-2 Weeks
£1017.28
£1220.74 Inc Vat
APCAPDU9965
APC Logo
ZeroU, 8.6kW, 208V, (21) C13/C15 & (3) C19/C21

APC APDU9965 Rack PDU 9000 Switched, ZeroU, 8.6kW, 208V, (21) C13/C15 & (3) C19/C21

Express View Logo
In Stock: 1-2 Weeks
£1116.65
£1339.98 Inc Vat
APCAPDU9966
APC Logo
ZeroU, 17.3kW, 208V, (20) C13/C15, (12) C19/C21

APC APDU9966 Rack PDU 9000 Switched, ZeroU, 17.3kW, 208V, (20) C13/C15, (12) C19/C21

Express View Logo
Out Of Stock
£ POA
£ POA Inc Vat
APCAPDU9967
APC Logo
ZeroU, 17.3kW, 208V, (42) C13/C15, (6) C19/C21

APC APDU9967 Rack PDU 9000 Switched, ZeroU, 17.3kW, 208V, (42) C13/C15, (6) C19/C21

Express View Logo
Out Of Stock
£ POA
£ POA Inc Vat
APCAPDU9970
APC Logo
ZeroU, 30A, 120/208V, (16) 5-20R (7) C13/C15 (1) C19/C21

APC APDU9970 Rack PDU 9000 Switched, ZeroU, 30A, 120/208V, (16) 5-20R (7) C13/C15 (1) C19/C21

Express View Logo
Out Of Stock
£ POA
£ POA Inc Vat
APCAPDU9981EU3
APC Logo

APC APDU9981EU3 Rack PDU 9000 Switched, ZeroU, 11.0kW, 230V, (21) C13 & (3) C19

Express View Logo
In Stock: 1-2 Weeks
£1026.75
£1232.10 Inc Vat
APDU9981NA3
APC Logo
ZeroU, 11.5kW, 208V, (21) C13/C15 & (3) C19/C21

APC APDU9981NA3 Rack PDU 9000 Switched, ZeroU, 11.5kW, 208V, (21) C13/C15 & (3) C19/C21

Express View Logo
In Stock: 1-2 Weeks
£1017.28
£1220.74 Inc Vat
Other Ranges Available
APC Metered Rack PDU
APC Metered Rack PDU
View Range
APC Easy PDUs
View Range
Rackmount Transfer Switches
APC Rackmount Transfer Switches
View Range
APC Basic Rack PDU
APC Basic Rack PDU
View Range
Join Our Mailing List
Social Links
  • Apply for Credit