APC Switched Easy PDUs

Easy rack PDU Metered-by-Outlet with Switching EPDU2216SMBO provides advanced power monitoring and control capabilities for individual outlets, empowering critical IT infrastructure. The Network Management Card NMC3 provides enhanced cybersecurity with secured interfaces and modified password policy.

The rack PDU integrates with EcoStruxure IT through a Network Management Card (NMC3) and can be accessed and configured via Web, SNMP, and Command Line Interface. EPDU2216SMBO is designed for three phase applications of upto 11kw and industry standards of 1% metering accuracy.

This comes with IEC 603093 32A 3P+N+PE type inlet, eighteen IEC C13 and six IEC C19 type outlet sockets. It features an ultra-lightweight aluminum housing, offering up to 50% weight reduction, along with environmental monitoring and an all-new improved display module.

Vertical mounting capabilities allow users to mount the units in a rack or enclosure in zero U space without expending valuable rack space This is designed to operate within a temperature range of -5°C to +50°C and is backed by a standard 2-year warranty.

Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment) The rack PDU supports daisy-chain of up to 4 PDUs on a single IP address, thereby reducing networking cost.

Specifications

Main

Colour: Black
Product or component type: PDU
PDU type: Metered outlet
Cord length: 3 m
Number of cables: 1
Provided equipment: Installation guide
Complementary

Input Voltage: 400 V 3 phases
Dimensions (H x W x D): 1800 mm x 55 mm x 56 mm
Output Voltage: 230 V
Net weight: 7.12 kg
Mounting location: Side
Mounting preference: No preference
Input Plug Type: IEC 60309 16 A 3P + N + PE
Mounting mode: Not rack-mountable
Rack units: 0U
USB compatible: No
Mounting position: Vertical
Communication port protocol: SNMP
[In] rated current: 16 A
Max line current: 16 A
Input current limits: 16 A
Load capacity: 11000 VA
Network frequency: 50/60 Hz
Plug standard: IEC 60309
Outlet type and quantity: 18 IEC 60320 C13 10 A
Communication network type: 10/100BASE-T
Environment

Product certifications: CE
Ambient air temperature for operation: -5-50 °C
Relative humidity: 5-95 %
Operating altitude: 0-3000 m
Ambient air temperature for storage: -25-65 °C
Storage Relative Humidity: 5-95 %
Storage altitude: 0-15000 m
Packing Units

Unit Type of Package 1: PCE
Number of Units in Package 1: 1
Package 1 Dimensions (H x W x L): 203 cm x 19.5 cm x 13 cm
Package 1 Weight: 8.29 kg
Contractual warranty

Warranty: 2 Years repair and replace

Easy rack PDU Metered-by-Outlet with Switching EPDU2132SMBO provides advanced power monitoring and control capabilities for individual outlets, empowering critical IT infrastructure. The Network Management Card NMC3 provides enhanced cybersecurity with secured interfaces and modified password policy.

The rack PDU integrates with EcoStruxure IT through a Network Management Card (NMC3) and can be accessed and configured via Web, SNMP, and Command Line Interface. EPDU2132SMBO is designed for single phase applications of upto 7.4kw and industry standards of 1% metering accuracy.

This comes with IEC 603093 32A 2P+E type inlet, Twenty IEC C13 and four IEC C19 type outlet sockets. It features an ultra-lightweight aluminum housing, offering up to 50% weight reduction, along with environmental monitoring and an all-new improved display module. range of -5°C to +50°C and is backed by a standard 2-year warranty.

Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment) The rack PDU supports daisy-chain of up to 4 PDUs on a single IP address, thereby reducing networking cost.

Vertical mounting capabilities allow users to mount the units in a rack or enclosure in zero U space without expending valuable rack space This is designed to operate within a temperature

Specifications

Main

Colour: Black
Product or component type: PDU
PDU type: Metered outlet
Cord length: 3 m
Number of cables: 1
Provided equipment: Installation guide
Complementary

Input Voltage: 200 V
Dimensions (H x W x D): 1800 mm x 55 mm x 56 mm
Output Voltage: 230 V
Net weight: 7.42 kg
Mounting location: Side
Mounting preference: No preference
Input Plug Type: IEC 60309 32 A 2P + E
Mounting mode: Not rack-mountable
Rack units: 0U
USB compatible: No
Mounting position: Vertical
Communication port protocol: SNMP
[In] rated current: 32 A
Permissible voltage: 200-240 V
Max line current: 32 A
Input current limits: 32 A
Load capacity: 7360 VA
Network frequency: 50/60 Hz
Plug standard: IEC 60309
Outlet type and quantity: 20 IEC 60320 C13
Communication network type: 10/100BASE-T
Environment

Product certifications: CE
Ambient air temperature for operation: -5-50 °C
Relative humidity: 5-95 %
Operating altitude: 0-3000 m
Ambient air temperature for storage: -25-65 °C
Storage Relative Humidity: 5-95 %
Storage altitude: 0-15000 m
Packing Units

Unit Type of Package 1: PCE
Number of Units in Package 1: 1
Package 1 Dimensions (H x W x L): 203 cm x 19.5 cm x 13 cm
Package 1 Weight: 8.59 kg
Contractual warranty

Warranty: 2 Years repair and replace

Easy Switched Rack PDUs provide advanced load monitoring combined with remote on/off switching control of individual outlets for power cycling.




Product Features

Ultra-light weight thanks to aluminum housing


Support both toolless mounting and bracket mounting


Built-in input cord with Industrial connector for vertical PDU


Low-profile in depth, more convenience for equipment installation
User-friendly and simple Web interface and LCD screen


Support network port , easy for data communication


Field-replaceable control module, easy for maintenance
 
Product Benefits

Single input power source

Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections. Rack-Mountable

Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.  
Network Management Capabilities

Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements. Local Current Monitoring Display

The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)  
Remote Individual Outlet Control

Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment). Flash Upgradeable

Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released.  
Power Delays

Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly. Network port sharing

Allows four rack PDUs to be connected using In and Out ports so that only one network connection is necessary.  

EPDU1016S Technical Specification Electrical Nominal Voltage 230VAC Input Circuit 16A Input Frequency 50/60Hz Input Connector IEC-320 C20 200-240V Inlet Input Cord Length 2.5 m Output Voltage 200-240VAC, 1PH Output Receptacles ( 8 ) C13 Circuit Breakers N/A Physical Mount Style Horizontal (19" rackmountable) Width 482mm Height 44.4mm Depth 200mm Housing Material Sheetmetal Tool-less Mounting N/A Colour Black User Interface Local User Interface LCD Display, Language: English Local User Control 2 Buttons for scroll/select/Reset Communication I/O 1 Network port, 1 Temperature/Humidity port, 2RS485 port sharing connection Remote Management Capabilities http/https, SNMP V1, V2, V3 Environmental Operating Temperature -5oC to +45oC Operating Humidity 5-95%RH, non-condensing Elevation Operating/Storage 0–3000m / 0–15000m Regulatory EMC CE, followed by standard EN55035, EN55032, EN55024 Safety CE, TUV, followed by standard EN/IEC62368-1 Environment RoHS, REACH Package Rack Mounting Brackets M6x16mm screw (4pcs), M6 cage nut (4pcs) Safety Sheet Included Installations Instructions Included Package Dimensions 560*220*80mm Weight/Shipping Weight 2.8KG/3.6KG Accessory Part Number EPDU-TH (need to be ordered separately) Warranty Length 1 Year

Easy Switched Rack PDUs provide advanced load monitoring combined with remote on/off switching control of individual outlets for power cycling.




Product Features

Ultra-light weight thanks to aluminum housing


Support both toolless mounting and bracket mounting


Built-in input cord with Industrial connector for vertical PDU


Low-profile in depth, more convenience for equipment installation
User-friendly and simple Web interface and LCD screen


Support network port , easy for data communication


Field-replaceable control module, easy for maintenance
 
Product Benefits

Single input power source

Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections. Rack-Mountable

Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.  
Network Management Capabilities

Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements. Local Current Monitoring Display

The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)  
Remote Individual Outlet Control

Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment). Flash Upgradeable

Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released.  
Power Delays

Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly. Network port sharing

Allows four rack PDUs to be connected using In and Out ports so that only one network connection is necessary.  

EPDU1116S Technical Specification Electrical Nominal Voltage 230VAC Input Circuit 16A Input Frequency 50/60Hz Input Connector IEC 309 16A 2P+E Input Cord Length 3 m Output Voltage 200-240VAC, 1PH Output Receptacles ( 20 ) C13 ( 4 ) C19 Circuit Breakers N/A Physical Mount Style Vertical Width 55mm Height 1738mm Depth 62mm Housing Material Sheetmetal Tool-less Mounting Yes Colour Black User Interface Local User Interface LCD Display, Language: English Local User Control 2 Buttons for scroll/select/Reset Communication I/O 1 Network port, 1 Temperature/Humidity port, 2RS485 port sharing connection Remote Management Capabilities http/https, SNMP V1, V2, V3 Environmental Operating Temperature -5oC to +45oC Operating Humidity 5-95%RH, non-condensing Elevation Operating/Storage 0–3000m / 0–15000m Regulatory EMC CE, followed by standard EN55035, EN55032, EN55024 Safety CE, TUV, followed by standard EN/IEC62368-1 Environment RoHS, REACH Package Rack Mounting Brackets M5x10mm, self-tapping screw (4pcs), L type Bracket 2pcs (screw included) Safety Sheet Included Installations Instructions Included Package Dimensions 1950*160*110mm Weight/Shipping Weight 7.3KG/8.5KG Accessory Part Number EPDU-TH (need to be ordered separately) Warranty Length 1 Year

Easy Switched Rack PDUs provide advanced load monitoring combined with remote on/off switching control of individual outlets for power cycling.




Product Features

Ultra-light weight thanks to aluminum housing


Support both toolless mounting and bracket mounting


Built-in input cord with Industrial connector for vertical PDU


Low-profile in depth, more convenience for equipment installation
User-friendly and simple Web interface and LCD screen


Support network port , easy for data communication


Field-replaceable control module, easy for maintenance
 
Product Benefits

Single input power source

Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections. Rack-Mountable

Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.  
Network Management Capabilities

Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements. Local Current Monitoring Display

The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)  
Remote Individual Outlet Control

Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment). Flash Upgradeable

Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released.  
Power Delays

Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly. Network port sharing

Allows four rack PDUs to be connected using In and Out ports so that only one network connection is necessary.  

EPDU1116S Technical Specification Electrical Nominal Voltage 230VAC Input Circuit 32A Input Frequency 50/60Hz Input Connector IEC 309 16A 2P+E Input Cord Length 3 m Output Voltage 200-240VAC, 1PH Output Receptacles ( 20 ) C13 ( 4 ) C19 Circuit Breakers 2 X 16A 1-pole hydraulic-magnetic circuit breakers Physical Mount Style Vertical Width 55mm Height 1738mm Depth 62mm Housing Material Sheetmetal Tool-less Mounting Yes Colour Black User Interface Local User Interface LCD Display, Language: English Local User Control 2 Buttons for scroll/select/Reset Communication I/O 1 Network port, 1 Temperature/Humidity port, 2RS485 port sharing connection Remote Management Capabilities http/https, SNMP V1, V2, V3 Environmental Operating Temperature -5oC to +45oC Operating Humidity 5-95%RH, non-condensing Elevation Operating/Storage 0–3000m / 0–15000m Regulatory EMC CE, followed by standard EN55035, EN55032, EN55024 Safety CE, TUV, followed by standard EN/IEC62368-1 Environment RoHS, REACH Package Rack Mounting Brackets M5x10mm, self-tapping screw (4pcs), L type Bracket 2pcs (screw included) Safety Sheet Included Installations Instructions Included Package Dimensions 1950*160*110mm Weight/Shipping Weight 7.9KG/9.0KG Accessory Part Number EPDU-TH (need to be ordered separately) Warranty Length 1 Year

APC EPDU1216S EasyPDU, Switched, Zero U, 11 kW, 230V, (21) C13 & (6) C19?IEC309

APC EPDU1232S EasyPDU, Switched, Zero U, 22 kW, 230V, (18) C13 & (6) C19?IEC309

APC EPDU1232SX3620 EasyPDU, Switched, Zero U, 22 kW, 230V, (30) C13 & (6) C19?IEC309

Easy rack PDU Metered-by-Outlet with Switching EPDU2116SMBO provides advanced power monitoring and control capabilities for individual outlets, empowering critical IT infrastructure. The APC Network Management Card NMC3 provides enhanced cybersecurity with secured interfaces.

The rack PDU integrates with EcoStruxure IT through a Network Management Card (NMC3) and can be accessed and configured via Web, SNMP, and Command Line Interface. EPDU2116SMBO is designed for single phase applications of upto 3.7kw and industry standards of 1% metering accuracy.

This comes with IEC 60309 16A 2P+E type inlet, Twenty IEC C13 and four IEC C19 type outlet sockets. It features an ultra-lightweight aluminum housing, offering up to 50% weight reduction, along with environmental monitoring and an all-new improved display module.

Vertical mounting capabilities allow users to mount the units in a rack or enclosure in zero U space without expending valuable rack space This is designed to operate within a temperature range of -5°C to +50°C and is backed by a standard 2-year warranty.

Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment) The rack PDU supports daisy-chain of up to 4 PDUs on a single IP address, thereby reducing networking cost.

Specifications

Main

Colour: Black
Product or component type: PDU
PDU type: Metered outlet
Cord length: 3 m
Number of cables: 1
Provided equipment: Installation guide
Complementary

Input Voltage: 200 V
Dimensions (H x W x D): 1800 mm x 55 mm x 56 mm
Output Voltage: 230 V
Net weight: 6.67 kg
Mounting location: Side
Mounting preference: No preference
Input Plug Type: IEC 60309 16 A 2P + E
Mounting mode: Not rack-mountable
Rack units: 0U
USB compatible: No
Mounting position: Vertical
Communication port protocol: SNMP
[In] rated current: 16 A
Permissible voltage: 200-240 V
Max line current: 16 A
Input current limits: 16 A
Load capacity: 3680 VA
Network frequency: 50/60 Hz
Plug standard: IEC 60309
Outlet type and quantity: 20 IEC 60320 C13
Communication network type: 10/100BASE-T
Environment

Product certifications: CE
Ambient air temperature for operation: -5-50 °C
Relative humidity: 5-95 %
Operating altitude: 0-3000 m
Ambient air temperature for storage: -25-65 °C
Storage Relative Humidity: 5-95 %
Storage altitude: 0-15000 mm
Packing Units

Unit Type of Package 1: PCE
Number of Units in Package 1: 1
Package 1 Dimensions (H x W x L): 203 cm x 19.5 cm x 13 cm
Package 1 Weight: 7.84 kg
Contractual warranty

Warranty: 2 Years repair and replace

Easy rack PDU Metered-by-Outlet with Switching EPDU2232SMBO provides advanced power monitoring and control capabilities for individual outlets, empowering critical IT infrastructure. The Network Management Card NMC3 provides enhanced cybersecurity with secured interfaces and modified password policy.

The rack PDU integrates with EcoStruxure IT through a Network Management Card (NMC3) and can be accessed and configured via Web, SNMP, and Command Line Interface. EPDU2232SMBO is designed for three phase applications of upto 22kw and industry standards of 1% metering accuracy.

This comes with IEC 603093 32A 3P+N+PE type inlet, eighteen IEC C13 and six IEC C19 type outlet sockets. It features an ultra-lightweight aluminum housing, offering up to 50% weight reduction, along with environmental monitoring and an all-new improved display module.

Vertical mounting capabilities allow users to mount the units in a rack or enclosure in zero U space without expending valuable rack space This is designed to operate within a temperature range of -5°C to +50°C and is backed by a standard 2-year warranty.

Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment) The rack PDU supports daisy-chain of up to 4 PDUs on a single IP address, thereby reducingnetworking cost.

Specifications

Main

Colour: Black
Product or component type: PDU
PDU type: Metered outlet
Cord length: 3 m
Number of cables: 1
Provided equipment: Installation guide
Complementary

Input Voltage: 400 V 3 phases
Dimensions (H x W x D): 1800 mm x 55 mm x 56 mm
Output Voltage: 230 V
Net weight: 8.68 kg
Mounting location: Side
Mounting preference: No preference
Input Plug Type: IEC 60309 32 A 3P + N + PE
Mounting mode: Not rack-mountable
Rack units: 0U
USB compatible: No
Mounting position: Vertical
Communication port protocol: SNMP
[In] rated current: 32 A
Max line current: 32 A
Input current limits: 32 A
Load capacity: 22000 VA
Network frequency: 50/60 Hz
Plug standard: IEC 60309
Outlet type and quantity: 18 IEC 60320 C13 10 A
Communication network type: 10/100BASE-T
Environment

Product certifications: CE
Ambient air temperature for operation: -5-45 °C
Relative humidity: 5-95 %
Operating altitude: 0-3000 m
Ambient air temperature for storage: -25-65 °C
Storage Relative Humidity: 5-95 %
Storage altitude: 0-15000 m
Packing Units

Unit Type of Package 1: PCE
Number of Units in Package 1: 1
Package 1 Dimensions (H x W x L): 203 cm x 19.5 cm x 13 cm
Package 1 Weight: 9.85 kg
Contractual warranty

Warranty: 2 Years repair and replace