A maximum of three Liebert GXT3-10000T230 UPSs can be connected in parallel. The redundancy parallel system can noticeably improve system reliability. In normal condition, neither UPS module works at full load. That means that even if the load is increased, the system will not transfer to bypass. When a UPS module shuts down due to any failure, the remaining UPS module can still power and protect the load. When redundancy is lost due to module failure or load increase, the parallel system will trigger an alarm.
View More
Liebert external battery cabinets may be connected to the UPS to provide additional battery run time. External battery cabinets are designed to be placed on one side of the UPS in a tower configuration or stacked beneath the UPS in a rack configuration.
Features:
Rack/tower configuration in one form factor
Rotatable display
Automatic frequency detection
User replaceable hot-swappable internal batteries
Additional runtime with additional battery cabinets
Multiple output possibilities (hardwired and receptacles)
Includes Windows-based configuration program
Built-in USB communications for use with Liebert MultiLink
Built-in closure signals
Emergency power off (EPO)
Parallelable up to 3 units
Wider input voltage window minimizes battery use
Internal automatic and manual bypass
Self-diagnostics
Uses minimum rack space
Shields batteries from heat generating electronic components
Battery cutoff voltage to prevent from overdischarge of batteries
Extend your warranty for greater peace of mind.
View More
Liebert external battery cabinets may be connected to the UPS to provide additional battery run time. External battery cabinets are designed to be placed on one side of the UPS in a tower configuration or stacked beneath the UPS in a rack configuration.
Features:
Intelligent battery management to extend the battery life
Operation and display panel with LED for monitoring load percentage and battery capacity independently
Flexible network management
Fan fault self-inspection and automated diagnostic function
Intelligent fan operation, automatically changing rotation speed depending on system requirements, to decrease power consumption and noise
Input circuit breaker to ease recovery from overloads
CE mark and safety approval from CE
Dry contacts for remote monitoring
Output voltage selection function
Liebert® GXT3 10kVA (9000W) is a single phase Tower UPS with on-line double conversion technology making it ideal for protecting critical IT loads such as VoIP and PoE which demand continuous high-quality AC power in a limited amount of space.
Liebert GXT3 is designed to deliver higher power capacities for applications with limited floor space.
Communications For Power Monitoring And Control Liebert GXT3 offers a variety of communications options providing flexible monitoring and control capabilities. Operation can be monitored using:
Liebert IntelliSlot™ web card providing SNMP and web-based monitoring and control of your UPS
Liebert MultiLink™ automated system shutdown software
Liebert Nform™ monitoring system
Third-party monitoring systems
Ideally suited for Mission-Critical Applications such as:
LAN & WAN servers
Network equipment
IP telephony deployments
Office telecommunications systems
ISDN & frame relay applications
Test and diagnostic equipment
Micro processor-controlled equipment
Finance applications
Flexibility:
Automatic frequency detection
User replaceable hot-swappable internal batteries
Extended back up time with additional battery cabinets
Liebert IntelliSlot™ communications port
Multiple output possibilities (hardwired and socket)
Includes Windows-based configuration program
Built-in USB communications for use with Liebert MultiLink™ automated shutdown software
Built-in closure signals
Emergency power off (EPO)
Parallelable up to 2+1
Higher Availability:
Wider input voltage window minimizes battery use
Internal automatic and manual bypass
Self-diagnostics
Reduced Total Cost Of Ownership:
Standard two-year warranty
Uses minimum rack space
Batteries shielded from heat generating electronic components
Battery cutoff voltage to prevent from over discharge of batteries
This Liebert GXT3 10kVA unit offers a flexible solution for protecting rack-mount equipment, including VoIP and PoE. Especially designed for use with the new generation of high power switches, this compact UPS system packs 10kVA (9kW) of power into a 6U rack/tower package with flexible output voltage and bundled output distribution and maintenance bypass. The UPS includes built-in, user-replaceable batteries for up to three minutes of runtime at full load.
Features:
Adaptable design
Hot-swappable operation
Adaptable design
The standard 10kVA model includes terminal blocks for hardwired connections of both input and output. The bundled power distribution module provides 4x IEC-C19 receptacles for blade servers or high-end networking
Hot-swappable operation
The Liebert GXT3 10kVA unit features three bays for one power module and two battery modules. The chassis contains a bypass switch that allows all modules to be removed without powering down the connected load.
This Liebert GXT3 10kVA unit offers a flexible solution for protecting rack-mount equipment, including VoIP and PoE. Especially designed for use with the new generation of high power switches, this compact UPS system packs 10kVA (9kW) of power into a 6U rack/tower package with flexible output voltage and bundled output distribution and maintenance bypass. The UPS includes built-in, user-replaceable batteries for up to three minutes of runtime at full load.
Features:
Adaptable design
Hot-swappable operation
Adaptable design
The standard 10kVA model includes terminal blocks for hardwired connections of both input and output. The bundled power distribution module provides 4x IEC-C19 receptacles for blade servers or high-end networking
Hot-swappable operation
The Liebert GXT3 10kVA unit features three bays for one power module and two battery modules. The chassis contains a bypass switch that allows all modules to be removed without powering down the connected load.
