Vertiv Liebert Edge UPS

Overview

The Vertiv™ EDGE-750IMT comes in a tower format and offers 750VA/630W of backup power protection for server and networking equipment. Featuring a high 0.9 power factor, controllable outlets, and an intuitive LCD screen, Vertiv EDGE is a simple, cost-effective choice for distributed and edge IT applications.


Features
High output PF=0.9 to maximize available power and protect more equipment


1U, 2U, 3U, tower, rack/tower form factors, with power ratings from 500VA to 3000VA, to address a broad range of power requirements


Color graphic LCD display


Add up to 6 extended run battery cabinets to increase runtime


"Green mode" operation: in battery mode with small loads, the UPS will automatically shut down to protect batteries, optimize energy savings


Programmable outlets to disable non-critical loads, optimize battery runtime


Smart fan speed control for lower audible noise


RoHS and REACH compliant 
High efficiency, up to 98% in line mode, to deliver energy savings


Advanced AVR protection with 2x boost and 1x buck tap to protect the battery by smoothing out spikes, sags and brownouts


External battery cabinets with auto-detection


Rack/tower 3kVA model with short depth for flexible installation


Remote connectivity via network interface or serial connection to monitor power consumption and configure user-defined alert notifications to prevent downtime


Input breaker device for additional protection to the load in worst case failures


Extend battery life with deep discharge protection
  Product Diagram

USB Port
Output receptacles
Programmable output group
Input power socket
Input circuit breaker
Emergency Power Off (EPO) connector
Vertiv™ Intellislot® Port for optional management cards
Earth terminal
Technical Specifications Power Rating 750VA / 675W Input Voltage 230V AC Output Voltage 200 / 208 / 220 / 230 / 240 VAC Efficiency 95% Wiring Input: IEC C14 Output: 3+2 x IEC C13 Interface Options USB & Slot for optional cards Control Panel LCD Display Operating Temperature 0 - 40ºC Listings CE, CB Topology Line interactive (pure sinewave)

Overview

The Vertiv™ EDGE-500IRM1U comes in a 1U rack format and offers 500VA/300W of backup power protection for server and networking equipment. Featuring a high 0.9 power factor, controllable outlets, and an intuitive LCD screen, Vertiv EDGE is a simple, cost-effective choice for distributed and edge IT applications.


Features
High output PF=0.9 to maximize available power and protect more equipment


1U, 2U, 3U, tower, rack/tower form factors, with power ratings from 500VA to 3000VA, to address a broad range of power requirements


Color graphic LCD display


Add up to 6 extended run battery cabinets to increase runtime


"Green mode" operation: in battery mode with small loads, the UPS will automatically shut down to protect batteries, optimize energy savings
Programmable outlets to disable non-critical loads, optimize battery runtime


Smart fan speed control for lower audible noise


RoHS and REACH compliant 
High efficiency, up to 98% in line mode, to deliver energy savings


Advanced AVR protection with 2x boost and 1x buck tap to protect the battery by smoothing out spikes, sags and brownouts


External battery cabinets with auto-detection


Rack/tower 3kVA model with short depth for flexible installation


Remote connectivity via network interface or serial connection to monitor power consumption and configure user-defined alert notifications to prevent downtime


Input breaker device for additional protection to the load in worst case failures


Extend battery life with deep discharge protection
  Product Diagram

USB Port
Output receptacles
Programmable output group
Input power socket
Input circuit breaker
Emergency Power Off (EPO) connector
Vertiv™ Intellislot® Port for optional management cards
Technical Specifications Power Rating 500VA / 450W Input Voltage 230V AC Output Voltage 200 / 208 / 220 / 230 / 240 VAC Efficiency 94% Wiring Input: IEC C14 Output: 3+3 x IEC C13 Interface Options USB & Slot for optional cards Control Panel LCD Display Operating Temperature 0 - 40ºC Listings CE, CB Topology Line interactive (pure sinewave)

Overview

The Vertiv™ EDGE-1000IMT comes in a tower format and offers 1000VA/900W of backup power protection for server and networking equipment. Featuring a high 0.9 power factor, controllable outlets, and an intuitive LCD screen, Vertiv EDGE is a simple, cost-effective choice for distributed and edge IT applications.


Features
High output PF=0.9 to maximize available power and protect more equipment


1U, 2U, 3U, tower, rack/tower form factors, with power ratings from 500VA to 3000VA, to address a broad range of power requirements


Color graphic LCD display


Add up to 6 extended run battery cabinets to increase runtime


"Green mode" operation: in battery mode with small loads, the UPS will automatically shut down to protect batteries, optimize energy savings


Programmable outlets to disable non-critical loads, optimize battery runtime


Smart fan speed control for lower audible noise


RoHS and REACH compliant 
High efficiency, up to 98% in line mode, to deliver energy savings


Advanced AVR protection with 2x boost and 1x buck tap to protect the battery by smoothing out spikes, sags and brownouts


External battery cabinets with auto-detection


Rack/tower 3kVA model with short depth for flexible installation


Remote connectivity via network interface or serial connection to monitor power consumption and configure user-defined alert notifications to prevent downtime


Input breaker device for additional protection to the load in worst case failures


Extend battery life with deep discharge protection
  Technical Specifications Power Rating 1000VA / 900W Input Voltage 230V AC Output Voltage 200 / 208 / 220 / 230 / 240 VAC Efficiency 96% Wiring Input: IEC C14 Output: 3+2 x IEC C13 Interface Options USB & Slot for optional cards Control Panel LCD Display Operating Temperature 0 - 40ºC Listings CE, CB Topology Line interactive (pure sinewave)

Overview

The Vertiv™ EDGE-1500IMT comes in a tower format and offers 1500VA/1350W of backup power protection for server and networking equipment. Featuring a high 0.9 power factor, controllable outlets, and an intuitive LCD screen, Vertiv EDGE is a simple, cost-effective choice for distributed and edge IT applications.


Features
High output PF=0.9 to maximize available power and protect more equipment


1U, 2U, 3U, tower, rack/tower form factors, with power ratings from 500VA to 3000VA, to address a broad range of power requirements


Color graphic LCD display


Add up to 6 extended run battery cabinets to increase runtime


"Green mode" operation: in battery mode with small loads, the UPS will automatically shut down to protect batteries, optimize energy savings


Programmable outlets to disable non-critical loads, optimize battery runtime


Smart fan speed control for lower audible noise


RoHS and REACH compliant 
High efficiency, up to 98% in line mode, to deliver energy savings


Advanced AVR protection with 2x boost and 1x buck tap to protect the battery by smoothing out spikes, sags and brownouts


External battery cabinets with auto-detection


Rack/tower 3kVA model with short depth for flexible installation


Remote connectivity via network interface or serial connection to monitor power consumption and configure user-defined alert notifications to prevent downtime


Input breaker device for additional protection to the load in worst case failures


Extend battery life with deep discharge protection
  Technical Specifications Power Rating 1500VA / 1350W Input Voltage 230V AC Output Voltage 200 / 208 / 220 / 230 / 240 VAC Efficiency 96% Wiring Input: IEC C14 Output: 3+3 x IEC C13 Interface Options USB & Slot for optional cards Control Panel LCD Display Operating Temperature 0 - 40ºC Listings CE, CB Topology Line interactive (pure sinewave)

Overview

The Vertiv™ EDGE-1000IRM1U comes in a 1U rack format and offers 1000VA/900W of backup power protection for server and networking equipment. Featuring a high 0.9 power factor, controllable outlets, and intuitive LCD screen, Vertiv EDGE is a simple, cost-effective choice for distributed and edge IT applications.


Features
High output PF=0.9 to maximize available power and protect more equipment


1U, 2U, 3U, tower, rack/tower form factors, with power ratings from 500VA to 3000VA, to address a broad range of power requirements


Color graphic LCD display


Add up to 6 extended run battery cabinets to increase runtime


"Green mode" operation: in battery mode with small loads, the UPS will automatically shut down to protect batteries, optimize energy savings


Programmable outlets to disable non-critical loads, optimize battery runtime


Smart fan speed control for lower audible noise


RoHS and REACH compliant 
High efficiency, up to 98% in line mode, to deliver energy savings


Advanced AVR protection with 2x boost and 1x buck tap to protect the battery by smoothing out spikes, sags and brownouts


External battery cabinets with auto-detection


Rack/tower 3kVA model with short depth for flexible installation


Remote connectivity via network interface or serial connection to monitor power consumption and configure user-defined alert notifications to prevent downtime


Input breaker device for additional protection to the load in worst case failures


Extend battery life with deep discharge protection
  Product Diagram

USB Port
Output receptacles
Programmable output group
Input power socket
Input circuit breaker
Emergency Power Off (EPO) connector
Vertiv™ Intellislot® Port for optional management cards
Technical Specifications Power Rating 1000VA / 900W Input Voltage 230V AC Output Voltage 200 / 208 / 220 / 230 / 240 VAC Efficiency 96% Wiring Input: IEC C14 Output: 3+3 x IEC C13 Interface Options USB & Slot for optional cards Control Panel LCD Display Operating Temperature 0 - 40ºC Listings CE, CB Topology Line interactive (pure sinewave)

Overview

The Vertiv™ EDGE-1500IRT2UXL, in 2U rack and tower formats, offers 1500VA/1350W of backup power protection for server and networking equipment. Featuring a high 0.9 power factor, controllable outlets, and extended runtime cabinets, Vertiv EDGE is a cost-effective choice for distributed and edge IT applications.


Features
High output PF=0.9 to maximize available power and protect more equipment


1U, 2U, 3U, tower, rack/tower form factors, with power ratings from 500VA to 3000VA, to address a broad range of power requirements


Color graphic LCD display


Add up to 6 extended run battery cabinets to increase runtime


"Green mode" operation: in battery mode with small loads, the UPS will automatically shut down to protect batteries, optimize energy savings


Programmable outlets to disable non-critical loads, optimize battery runtime


Smart fan speed control for lower audible noise


RoHS and REACH compliant 
High efficiency, up to 98% in line mode, to deliver energy savings


Advanced AVR protection with 2x boost and 1x buck tap to protect the battery by smoothing out spikes, sags and brownouts


External battery cabinets with auto-detection


Rack/tower 3kVA model with short depth for flexible installation


Remote connectivity via network interface or serial connection to monitor power consumption and configure user-defined alert notifications to prevent downtime


Input breaker device for additional protection to the load in worst case failures


Extend battery life with deep discharge protection
  Product Diagram

USB Port
Output receptacles
Programmable output group
Input power socket
Input circuit breaker
Emergency Power Off (EPO) connector
Vertiv™ Intellislot® Port for optional management cards
Earth terminal
External battery cabinet connection
Automatic battery detection connector
Technical Specifications Power Rating 1500VA / 1350W Input Voltage 230V AC Output Voltage 200 / 208 / 220 / 230 / 240 VAC Efficiency 98% Wiring Input: IEC C14 Output: 3+3 x IEC C13 Interface Options USB & Slot for optional cards Control Panel LCD Display Operating Temperature 0 - 40ºC Listings CE, CB Topology Line interactive (pure sinewave)

Overview

The Vertiv™ EDGE-1500IRM1U, in 1U rack format, offers 1500VA/1350W of backup power protection for server and networking equipment. Featuring a high 0.9 power factor, controllable outlets, and extended runtime cabinets, Vertiv EDGE is a cost-effective choice for distributed and edge IT applications.


Features
High output PF=0.9 to maximize available power and protect more equipment


1U, 2U, 3U, tower, rack/tower form factors, with power ratings from 500VA to 3000VA, to address a broad range of power requirements


Color graphic LCD display


Add up to 6 extended run battery cabinets to increase runtime


"Green mode" operation: in battery mode with small loads, the UPS will automatically shut down to protect batteries, optimize energy savings


Programmable outlets to disable non-critical loads, optimize battery runtime


Smart fan speed control for lower audible noise


RoHS and REACH compliant 
High efficiency, up to 98% in line mode, to deliver energy savings


Advanced AVR protection with 2x boost and 1x buck tap to protect the battery by smoothing out spikes, sags and brownouts


External battery cabinets with auto-detection


Rack/tower 3kVA model with short depth for flexible installation


Remote connectivity via network interface or serial connection to monitor power consumption and configure user-defined alert notifications to prevent downtime


Input breaker device for additional protection to the load in worst case failures


Extend battery life with deep discharge protection
  Technical Specifications Power Rating 1500VA / 1350W Input Voltage 230V AC Output Voltage 200 / 208 / 220 / 230 / 240 VAC Efficiency 96% Wiring Input: IEC C14 Output: 3+3 x IEC C13 Interface Options USB & Slot for optional cards Control Panel LCD Display Operating Temperature 0 - 40ºC Listings CE, CB Topology Line interactive (pure sinewave)

Overview

Vertiv™ EDGE-3000IRT3UXL, in 3U rack and tower formats, offers 3000VA/2700W of backup power protection for server and networking equipment. Featuring a high 0.9 power factor, controllable outlets, and extended runtime cabinets, Vertiv EDGE is a cost-effective choice for distributed and edge IT applications.


Features
High output PF=0.9 to maximize available power and protect more equipment


1U, 2U, 3U, tower, rack/tower form factors, with power ratings from 500VA to 3000VA, to address a broad range of power requirements


Color graphic LCD display


Add up to 6 extended run battery cabinets to increase runtime


"Green mode" operation: in battery mode with small loads, the UPS will automatically shut down to protect batteries, optimize energy savings


Programmable outlets to disable non-critical loads, optimize battery runtime


Smart fan speed control for lower audible noise


RoHS and REACH compliant 
High efficiency, up to 98% in line mode, to deliver energy savings


Advanced AVR protection with 2x boost and 1x buck tap to protect the battery by smoothing out spikes, sags and brownouts


External battery cabinets with auto-detection


Rack/tower 3kVA model with short depth for flexible installation


Remote connectivity via network interface or serial connection to monitor power consumption and configure user-defined alert notifications to prevent downtime


Input breaker device for additional protection to the load in worst case failures


Extend battery life with deep discharge protection
  Technical Specifications Power Rating 3000VA / 2700W Input Voltage 230V AC Output Voltage 200 / 208 / 220 / 230 / 240 VAC Efficiency 98% Wiring Input: IEC C20 Output: 6+3 x IEC C13 & 1 x IEC C19 Interface Options USB & Slot for optional cards Control Panel LCD Display Operating Temperature 0 - 40ºC Listings CE, CB Topology Line interactive (pure sinewave)

Overview

Vertiv™ EDGE-3000IRT2UXL, in 2U rack and tower formats, offers 3000VA/2700W of backup power protection for server and networking equipment. Featuring a high 0.9 power factor, controllable outlets, and extended runtime cabinets, Vertiv EDGE is a cost-effective choice for distributed and edge IT applications.


Features
High output PF=0.9 to maximize available power and protect more equipment


1U, 2U, 3U, tower, rack/tower form factors, with power ratings from 500VA to 3000VA, to address a broad range of power requirements


Color graphic LCD display


Add up to 6 extended run battery cabinets to increase runtime


"Green mode" operation: in battery mode with small loads, the UPS will automatically shut down to protect batteries, optimize energy savings


Programmable outlets to disable non-critical loads, optimize battery runtime


Smart fan speed control for lower audible noise


RoHS and REACH compliant 
High efficiency, up to 98% in line mode, to deliver energy savings


Advanced AVR protection with 2x boost and 1x buck tap to protect the battery by smoothing out spikes, sags and brownouts


External battery cabinets with auto-detection


Rack/tower 3kVA model with short depth for flexible installation


Remote connectivity via network interface or serial connection to monitor power consumption and configure user-defined alert notifications to prevent downtime


Input breaker device for additional protection to the load in worst case failures


Extend battery life with deep discharge protection
  Technical Specifications Power Rating 3000VA / 2700W Input Voltage 230V AC Output Voltage 200 / 208 / 220 / 230 / 240 VAC Efficiency 98% Wiring Input: IEC C20 Output: 3+3 x IEC C13 & 1 x IEC C19 Interface Options USB & Slot for optional cards Control Panel LCD Display Operating Temperature 0 - 40ºC Listings CE, CB Topology Line interactive (pure sinewave)