With a die-cast aluminum base and interchangeable antenna, the PrismStation™ AC, brings increased performance to your network using technology that isolates beam communications between your devices. Utilising Ubiquiti's advanced airMAX® ac processor, the PrismStation™ delivers throughput speeds up to 500+ Mbps and signal ranges up to 5+ km (3+ miles).
Built to Fight Noise With Prism Active RF Filter
The Ubiquiti R&D team designed airPrism filtering as a robust solution for tower co-location interference. Requiring no communication between radios – and functioning despite noise from other vendors’ radios (unlike GPS synchronisation) – airPrism enables greater system capacity and overall throughput by further reducing out-of-band energy.
Modular Design
The antenna horn is interchangeable and helps with beam-shaping for specific deployment and environment needs. The IsoStationTM also gets maximum gain out of the smallest footprint.
Beam Performance Perfected
The PrismStation™ can use a variety of horn antenna sectors designed for increased co-location performance without sacrificing gain. Its unique beam performance and superb co-location characteristics allow for a higher density of sectors than traditional sector technology.
Enhanced Co-Location
Asymmetrical horn antenna options (60° and 90°) have naturally attenuated side lobes and extremely low back radiation, and they offer industry-leading front-to-back ratio and low side lobe radiation. Symmetrical horn antennas (30° and 45°, the default) are ideal for cluster sector installations with high co-location requirements.
Improved Noise Immunity
PrismStation™ AC blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.
High MAC Efficiency
High MAC efficiency provides ±80% PHY RATE throughput.
Management Wi-Fi Radio
ThePrismStation™ AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.
Now with airOS®8
airOS®8 provides powerful features, including airMAX® ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.
Rocket® Prism access points incorporate high-performance airMAX ac and airPrism technologies for maximum performance of wireless networks in high-density areas, in both 5 and 2.4 GHz.
Revolutionary Filtering Technology
Ubiquiti’s patented airPrism technology provides breakthrough radio selectivity in unlicensed wireless band performance. airPrism technology isolates signals within the operating channel to increase capacity and throughput in co-location deployments.
Designed for High Performance
TThe Rocket® Prism AC features EMI-shielded metal housing, GPS, airPrism circuitry, and the airView® real-time spectrum analyzer to deliver maximum spectral efficiency/throughput.
Full-Band 5 and 2.4 GHz Coverage
The Rocket® Prism 5AC delivers complete coverage of the 5 GHz spectrum with a single radio. The 2.4 GHz band is covered by the Rocket Prism 2AC.
Improved Surge Protection
The Rocket® Prism AC features enhanced protection against ESD events.
GPS Synchronisation
The Rocket® Prism AC supports GPS Sync for faster, more scalable, carrier-class networks, with 90% higher throughout than competing solutions.
Management Wi-Fi Radio
The Rocket® Prism AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.
Now with airOS®8
airOS®8 provides powerful features, including airMAX® ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.
Ubiquiti Networks introduces the CRM Point, a compact, locally hosted solution for management of your airMAX and airMAX ac network devices from a central point.
Key Features:
Plug and Play Installation
Breakthrough size and performance
Powerful quad-core architecture
Versatile scalability
No hosting fees
Plug and Play Installation
Instant setup - just connect the CRM Point to 802.3af PoE and run the UCRM Control setup wizard.
Breakthrough size and performance
Pocket-sized for a minimal footprint, the CRM Point can easily be plugged into any switch or router on your network.
Advanced Device Management
The U CRM Control software is pre-installed for immediate deployment and enables intuitive network management.
Powerful quad-core architecture
Featuring a quad-core processor, the CRM Point provides top-level processing power for centralized device management.
Versatile scalability
The CRM Point scales to host networks of almost any size to meet your growing management needs.
No hosting fees
The U CRM Control software and all of its data are stored locally on the CRM Point, eliminating the costs associated with third-party cloud storage.
The LiteAP ac is an ultra-lightweight airMAX ac Access Point with incredible performance and disruptive pricing.
Key Features:
airMAX ac sector coverage
Lightweight and sleek design
Installation flexibility
airMAX ac sector coverage
The LiteAP ac features a 2x2 MIMO antenna and communicates with multiple airMAX ac CPEs within a 120° coverage area.
Lightweight and sleek design
The LiteAP ac features a lightweight antenna with an integrated radio in a sleek and highly efficient design.
Installation flexibility
Featuring the freedom of three-axis alignment, the LiteAP ac fully assembles in seconds - no tools needed. Only a single wrench is required for pole-mounting.
The Rocket 2AC Prism features both airMAX ac and airPrism technologies for maximum wireless performance in high-density areas. Deploy the Rocket 2AC Prism anywhere in the world. It delivers complete coverage of the 2.4 GHz spectrum with a single radio. The Rocket 2AC Prism allows for flexibility in configuring channel bandwidths.
Key Features:
Management Wi-Fi radio
Improved surge protection
Access Point PtMP airMAX mixed mode
AirMAX ac protocol support
Long-range Point-to-Point (PtP) link mode
Selectable channel width
Automatic channel selection
Automatic distance selection
Strong WPA2 security
AirMagic channel selection tool
Dynamic configuration changes
Instant input validation
HTML5 technology
Optimization for mobile devices
Detailed device statistics
Management Wi-Fi radio
The Rocket® Prism AC features enhanced protection against ESD events.
Improved surge protection
The Rocket® Prism AC features enhanced protection against ESD events.
Advanced RF analytics
airMAX ac devices feature a multi-radio architecture to power a revolutionary RF analytics engine. An independent processor on the PCBA powers a second, dedicated radio, which persistently analyzes the full 2.4 GHz spectrum and every received symbol to provide you with the advanced RF analytics.
Spectral analysis
airView allows you to identify noise signatures and plan your networks to minimize noise interference. airView runs in the background without disabling the wireless link, so there is no disruption to the network. In airView, there are three spectral views, each of which represents different data.
Superior performance
Ubiquiti's airMAX engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.
Improves SNR
High data rates require a high Signal-to-Noise Ratio (SNR), which is challenging to achieve, especially in noisy, high-density areas. Integrated into Ubiquiti's custom silicon, airPrism technology creates a high SNR by isolating signals within the operating channel and rejecting interference using specialized circuitry, the High-Selectivity Receiver (HSR).
Facilitates AP co-location
Co-location is vital in many scenarios. For example, a WISP may have limited tower space, so it must co-locate all APs within that allotted footprint. Shielding and other means can lessen interference but may be impractical. By deploying airMAX ac APs with airPrism technology, you can co-locate APs and enhance the overall performance of your wireless network.
System enables the system integrator to effectively and efficiently create wireless network designs of any size, from small to large, with the potential for unlimited scalability.
The built-in, dedicated security and monitoring radio of the UniFi WiFi BaseStation XG provides visibility into site performance, channel planning, and local interferers, allowing the integrator to properly evaluate performance and quickly respond to changing interference and security threat landscapes.
Easily accessible through any standard web browser and the UniFi mobile app, the UniFi Controller software is a powerful software engine ideal for high-density client deployments requiring low latency and high uptime performance.
Key Features:
Simultaneous 5 GHz tri-band 4x4 multi-user MIMO
Dedicated security radio with Persistent Threat Management
Software-controlled coverage pattern for cell-size optimization
Powerful hardware
The UniFi WiFi BaseStation XG features the latest in Wi-Fi 802.11ac Wave 2 MU-MIMO technology combined with dedicated security and Bluetooth radios.
Intuitive UniFi controller software
The system integrator can leverage the controller to easily configure and administer an enterprise Wi-Fi network.
Expandable
The system integrator can start with one and expand to thousands while maintaining a single unified management system.
