TRENDnet Media Converters

The 1000Base-SX Industrial SFP Multi-Mode LC Module, model TI-MGBSX, is designed to operate within a wide temperature range and is well suited for industrial environments. 

This SFP module works with standard SFP slots found on industrial switches and fibre converters. The TI-MGBSX is compatible with Duplex LC fibre connector types and supports gigabit multi-mode fibre connections at distances of up to 550 m (1804 ft.).


Key Features:



Compliant with IEEE 802.3z Gigabit Ethernet
ANSI fibre Channel compliant
Small Form-Factor Pluggable (SFP) and Multi-Source Agreement (MSA) compliant
Wide operating temperature range of -40°C to 85°C
Supports data rates of up to 1.25 Gbps
Transmission distance of up to 550 m (1804 ft.)
Low Electromagnetic Interference (EMI) design
Supports 850 nm multi-mode network transmissions
Duplex LC optical interface
Low power consumption



Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)

The 1000Base-LX Industrial SFP Single-Mode LC Module, model TI-MGBS10, is designed to operate within a wide temperature range and is well suited for industrial environments. 

This SFP module works with standard SFP slots found on industrial switches and fibre converters. The TI-MGBS10 is compatible with Duplex LC fibre connector types and supports gigabit single-mode fibre connections at distances of up to 10 kilometres (6.2 miles).


Key Features:

Compliant with IEEE 802.3z Gigabit Ethernet
ANSI Fibre Channel compliant
Small Form-Factor Pluggable (SFP) and Multi-Source Agreement (MSA) compliant
Wide operating temperature range of -40°C to 85°C 
Supports data rates of up to 1.25Gbps
Transmission distance of up to 10km (6.2 miles)
Low Electromagnetic Interference (EMI) design
Supports 1310nm single-mode network transmissions
Duplex LC optical interface
Low power consumption



Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)

TRENDnet's Gigabit PoE PD SFP Fiber Media Converter, model TFC-PGSFP, converts 100/1000BASE-T copper Ethernet to 1000BASE-SX/LX Fiber SFP media and vice versa. 

The TFC-PGSFP is conveniently powered via PoE switch or injector, no power adapter is required. 

It features one gigabit PoE input port for power and data, plus one SFP slot that supports both multimode (SX) or single-mode (LX) SFP modules. The SFP slot accommodates both Fast Ethernet and Gigabit SFP modules providing further installation flexibility.


Key Features:

1 x 100/1000BASE-T PoE input port
1 x 100/1000BASE-SX/LX SFP slot
PoE Powered  no power adapter is required
SFP slot accommodates multimode or single-mode modules
Supports Link Fault Pass-Through (LFPT)
Jumbo Frame (9KB) Support



Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)

TRENDnet's Industrial SFP to Gigabit UPoE Media Converter, model TI-UF11SFP, converts fibre to copper while providing power to PoE, PoE+ and UPoE compliant devices such as IP cameras, VoIP phones, and wireless access points. 

The hardened IP30 rated housing is suitable for industrial environments. Redundant power inputs (power supply sold separately: TI-S12048) with overload current protection minimizes downtime.


Key Features:



Hardened IP30 rated SFP to Gigabit UPoE converter
SFP port accommodates Multi or Single Mode fibre
Up to 40 km fibre networking distances with the TI-MGBS40 SFP module
Provides up to 60W for PoE, PoE+ and UPoE compliant devices
Includes DIN-rail and wall mounts
Wide operating temperature range -40°C to 75°C
Overload current protection
Powers supply sold separately (model TI-S12048)



Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)

TRENDnet's TI-F10SC is a compact IP40 rated 100Base-FX Fibre converter with hardened components rated for extreme industrial environments. 

It accommodates building-to-building or long distance networking with 100Base-FX Multi-Mode Fibre over distances of up to 2 km (1.2 miles). 

Both DIN-rail and wall mount hardware is included. Power supply sold separately: model TI-M6024.


Key Features:



Hardened IP40 rated compact housing
100Base-FX Multi-Mode Fibre over distances of up to 2 km (1.2 mi.)
SC-type Fibre port
Extreme -40ºC to 75ºC operating temperature range
Overload current protection
Includes DIN-rail and wall mounts
Power supply sold separately (model TI-M6024)



Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)

TRENDnet's TI-F11SFP is a reliable IP30 rated 100/1000Base-T to SFP media converter with hardened components rated for extreme industrial environments. 

Set 100Mbps or 1000Mbps throughput speeds, Auto Negotiation, and Link Fault Pass Through (LFP) using the front panel dip switches. 12 - 56V DC power input with overload current protection. 

(power supply sold separately: TI-M6024)

Key Features:

Hardened IP30 rated 100/1000Base-T Ethernet to SFP converter
SFP port accommodates Multi or Single Mode fibre modules
Up to 80km fibre networking distances with the TEG-MGBS80 SFP module
Operating temperature range of -40°C to 75°C
12 - 56V DC power input with overload current protection
Includes DIN-Rail and wall mounts
Power supply sold separately (model TI-M6024)

Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)

The 1000Base-EX Industrial SFP Single-Mode LC Module, model TI-MGBS40, is designed to operate within a wide temperature range and is well suited for industrial environments. 

This SFP module works with standard SFP slots found on industrial switches and fibre converters. The TI-MGBS40 is compatible with duplex LC fibre connector types and supports gigabit single-mode fibre connections at distances of up to 40 kilometres (24.8 miles).


Key Features:



Compliant with IEEE 802.3z Gigabit Ethernet
ANSI fibre Channel compliant
Small Form-Factor Pluggable (SFP) and Multi-Source Agreement (MSA) compliant
Wide operating temperature range of -40°C to 85°C 
Supports data rates of up to 1.25Gbps
Transmission distance of up to 40km (24.8 miles)
Low Electromagnetic Interference (EMI) design
Supports 1310nm single-mode network transmissions
Duplex LC optical interface
Low power consumption



Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)

TRENDnet's TI-F10S30 is a compact IP40 rated 100Base-FX fiber converter with hardened components rated for extreme industrial environments. 

It accommodates long distance networking with 100Base-FX Single-Mode fibre over distances of up to 30 km (18.6 miles). 


Both DIN-rail and wall mount hardware is included. Power supply sold separately: model TI-M6024.

Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)




Key Features:
Hardened IP40 rated compact housing
100Base-FX Single-Mode fiber over distances of up to 30 km (18.6 mi.)
SC-type fiber port
Extreme -40°C to 75°C operating temperature range
Overload current protection
Includes DIN-rail and wall mounts
Power supply sold separately (model TI-M6024)

TRENDnet's Industrial SFP to Gigabit PoE+ Media Converter, model TI-PF11SFP, converts fibre to copper while providing power to PoE and PoE+ compliant devices such as IP cameras, VoIP phones, and wireless access points. 

The hardened IP30 rated housing is suitable for extreme industrial environments. Dual redundant power inputs (power supply sold separately: TI-S12048) with overload current protection minimizes downtime.


Key Features:



Hardened IP30 rated SFP to Gigabit PoE+ converter
SFP port accommodates Multi or Single Mode fibre
Up to 40 km fibre networking distances with the TI-MGBS40 SFP module
Provides up to 30W for PoE and PoE+ compliant devices
Includes DIN-rail and wall mounts
Wide operating temperature range -40°C to 75°C
Dual redundant power inputs with overload current protection



Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)


Industrial Applications

Network devices for manufacturing, general industrial, warehousing, surveillance, and corporate applications.



UPoE+ Output

Converts fiber to copper while providing power to PoE and PoE+ compliant devices such as IP cameras, VoIP phones, and wireless access points





Industrial Environments

Hardened IP30 converter, with a -40°C to 75°C operating temperature range







Key Features:

  Network Ports

x Gigabit PoE+ Ethernet port and 1 x SFP slot
DIN-Rail/Wall Mounts

IP30 rated metal enclosure with included DIN-rail and wall mount hardware

Switching Capacity

2Gbps switching capacity  Redundant Power

Dual redundant power inputs with overload current protection (power supply sold separately: model TI-S12048) Operating Temperature

Hardened converter is rated for a wide operating temperature range of -40°C to 75°C Electromagnetic Compliance

Complies with FCC Part 15 Subpart B Class A and CE EN 55022 Class A standards Certifications

Rated for information technology (ITE) equipment (EN55022/24) and industrial, scientific, and medical (ISM) Equipment (EN55011) Shock and Vibration Resistant

Rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32), and vibration (IEC 60068-2-6) Grounding Point

Grounding point protects equipment from external electrical surges