The DCGT060BR is the perfect blend of design and function creating a cable grommet that is robust, easy to install and looks and performs well.
The Air-Block grommet is an ideal choice for plenum floor projects.
The flame retardant brush cable seal minimises air loss through the cable opening.
This unit is also available with a neoprene gasket seal, see DCGT060
Fits a 150mm diameter cut out
A 127mm / 5 inch floor Cable Grommet available in Black or Grey with Neoprene Air Seal. The grommet is constructed from ABS- KJW Flame Retardant Plastic. The sturdy construction means the unit can be installed underneath desk and in walkways / corridors. The unit is very easy to install.
ABS-KJW or Polycarbonate Flame retardant plastic
Adjustable cable openings
Integrated lid locking screw
Fast and easy to install
Captive screw down lid
Stock colours: black and grey
Custom colours available
Custom Gasket options available
Strong 15mm deep lid
Clamping Arms for Secure Fastening
Power and Data Plates can be fitted
Cleaners Socket available - 13amp or 5amp
Neoprene Air Seal
Part numbers – DCGTLC5GY & DCGTLC5BK
Diameter cut out: 127mm
Cable opening: 30mm x 75mm
Overall diameter: 140mm
Based on the popular DCGT085 grommet, the DCGTA85 Air-Quiff forms a tight air seal around cables. The DCGTA85 shares the same outer housing as the popular DCGT085 grommet. Therefore if cable density requirements increase for the DCGT085 it is possible to retrofit the unit with the DCGTA85 brush and top flange. The DCGTA85 can also be supplied with a safety lid for installation prior to cabling
The unit comprises of 3 parts:
Outer Ring Housing with quick locking clamping arms (no additional drilling once the opening is formed)
Brush Ring Insert - Cables can be installed through the grommet without the brush in place. Once cabling is completed the dense brush ring can be opened to encase the cables. The ring is then fitted into the Outer Housing
Top Flange - The two semi circle flanges fasten together to form an attractive top flange which conceals the rim of the brush ring and fits into and over the support flange of the outer housing
As the bristles are concentrated towards the centre of the grommet they form a dense brush seal which encapsulates cables forming a practical air seal.
The opening is large enough to facilitate almost all cabling requirements.
Overall Dimension :230mm diameter
Cut Out Dimension :209mm diameter
The DCGTA85 is based on the popular DCGT085 209mm cut out diameter grommet
The lid is replaced with a circular brush insert and a 2 part protective top section
The grommet can be installed and locked into position using the 2 fixing clamps. Cables can be easily brought through the brush-less grommet opening and then the brush is then installed and the protective top section fitted into position
The circular brush creates a dense central brush zone which forms an excellent air barrier almost regardless of the number and size of the cables passing through the grommet
The overall grommet is 233mm in diameter and 45mm deep
Polycarbonate or ABS-KJW Flame retardant plastic
Air-Guard® - the cooler choice
DCGTAG11 – AirGuard Round 5” / 127mm Brushed
The DCGTAG11 circular Air-Guard brush and gasket seal grommet fits a 127mm diameter floor cut out. The 2 piece split grommet is made from V0 flame retardant material and provides a safe, cost effective air seal solution for power or data cabinet cabling requirements. The cable opening is large enough to easily allow a 16/32amp commando socket to push safely through the raised floor panel without having to remove the grommet. The double brush and gasket seal form an effective air seal around the cables. If it is necessary to pass more cables through the grommet there is plenty of additional space capacity.
Airguard is delighted to bring to the market a no nonsense grommet solution which meets the safety and performance needs of data centre engineers.
Overall Diameter - 165mm
Cut out Diameter - 127mm
Stock Colour - Black
Sleeve depth - 40mm
Fixing hardware - 4 self tapping fixing screws supplied