The Air-Guard cable seal provides an easy, economical and effective solution to optimising thermal management of Data Room plenum cooled raised floor systems. Sealing around cable openings offers the following benefits:
Reduced air loss and increased under-foor static pressure
Improved cooling effciencies and extended cooling equipment life
Dramatically reduced plant running costs. Over 50% of conditioned air does not get to the air intake of data room equipment due to unsealed openings
Facilitates Cold / Hot aisle best practice
The GTAG4 Air-Guard offers tremendous fexibility in Data Centre cable management.
Overlapping brushes improves cable seal
Latched removable brush section allows for easy cable release
The GTAG4 Air-Guard can be installed at the edge or within the floor panel
Easy to install
Manufactured from High Strength Flame Retardant ABS and quality Nylon 6 brush
Air-Guard integrates with the Access Floor static dissipative system
RoHS compliant
The GTAG2 Air-Guard EXTREME cable grommet has a unique brush and gasket design which combine to form an excellent air seal around cables. The unit is fitted, as standard, with a strong safety cover which can be left in the housing until the grommet is ready for cabling. The GTAG2 Air-Guard is designed to address the problems caused by bypass air flow. Correct sealing cable openings will increase cooling efficiences and dramatically reduce energy cooling costs
Sealing around cable openings offers the following benefits:
Reduces bypass airflow and inrceases under-door static pressure.
Increases cooling efficiences
Reduces running and infastrucural costs.
Helps promote Hot Aisle / Cold Aisle best practice.
Improves air cooling performance of grilles and/or perforated panels.
Reduces carbon footprint.
Reduces hot spots.
The GTAG2 Air-Guard features
Double Layered Engineered Sealing System- Brush upper & EPDM lower gasket.
Unique Air-Guard overlapping Nylon 6 Brush System for an even better seal.
Integrated Safety Cover.
Frame and Lid Manufactured from High Strength Flame Retardant ABS.
Easy to install and integrates with the access oors static dissipative system.
Fits a door panel opening 230mm x 175mm.
Overall dimension 278mm x 215mm x 40mm.
Maximum cable aperture 180mm x 120mm.
RoHS compliant.
DCGTAG6 Air-Guard® Split 2 Compartment Floor Grommet
The Air-Guard Guard cable seal is “the cool choice” in providing easy, economical and effective solutions to optimizing the thermal management of Data Room plenum cooled raised access floor installations.
The DCGTAG6 is the split grommet with a difference - Power and Data Segregation
The DCGTAG6 Air-Guard features:
2 compartment colour coded cable way / power - data segregation arm
Air-Guards unique “Better Seal” overlapping better seal brush system
Brush and frame are made in flame retardant material
2 piece frame for easy access
Removable edge section
Suitable for perimeter or centre of tile installation
No nonsense construction
Easy to install
Supplied with template and fixing hardware
Sealing around cable openings offers the following benefits:
Reduced air loss and increased under-floor static pressure
Improved cooling efficiencies and extended cooling equipment life
Dramatically reduced plant running costs. Over 50% of conditioned air does not get to the air intake of data room equipment due to unsealed openings
Facilitates Cold / Hot aisle best practice
Overall dimension: 230mm x 160mm (9” x 6.75”)
Centre panel Cut Out: 180mm x 125mm (7.25” x 5”)
Edge of panel Cut Out: 185mm x 145mm (7.25” x 5.75”)
Air-Guard® - the cooler choice
Sealing cable openings in a computer room raised floor is simple using Air-Guard. Sealing cabled openings dramatically improves under floor cooling performance, helps reduce running costs and improves air flow delivery through the floor grilles.
The GTAG7 Air-Guard combines the air sealing properties of brush and gasket to form an industry leading air sealing grommet.
“Better Seal” overlapping brush system
Double layered EDPM lower gasket
All materials made from V0 flame retardant materials
2 part split grommet
Easy to install
Supplied with an integrated safety lid for use during fit out prior to cable installation
Supplied with cut out template and fitting hardware
RoHS Compliant
Dimensions
Overall Size – 275mm x 210mm x 38mm
Cut Out – 230mm x 165mm
- Review: The 10 Best Wireless Access Points
- Review: The Top 10 Best Ethernet Cables
- What Is An Ethernet Cable And What Does It Do?
- 10 Best CCTV Security IP Cameras For Home & Business
- Review: Best Powerline Adapters In The UK
- Celebrating 20 Years Of Comms Express!
- The Top 10 DrayTek Wireless Access Points
- Best Selling APC Products At Comms Express
- Review: Top 5 Best Performing APC Uninterruptible Power Supply Units (UPS)
- Review: Top 10 Best PDU’s