MikroTik Power Supplies

A single hotswap PSU for the MikroTik CCR1072, use as a spare or replacement.

A 24V 2.5A Power supply for Mikrotik RouterBoards.

Power output : 60 Watts


MikroTik 24HPOW Specifications



Input Voltage100/240V 1.6A
Output Voltage24V 2.5A
Tested ambient temperature-30°C to +50°C


Supplied with a UK power lead

The Mikrotik 24V2APOW is an internal PSU suitable for use with the 1009 series routers.

Internal PSU for CCR1009

Specifications:



Voltage 24V
Current 2.5A

48v 69W Power Adapter + Power plug for use with RB230, RB532, RB600 and "Ubiquiti EdgeRouter POE 5 Port EdgeMAX Router with PoE"

MikroTik 48POW Specifications:



Current 1.46A
Input Voltage 110/220V
Output Voltage 48V

A Mikrotik 48V 2A 96W power supply, to be used with MikroTik products that support 48V PoE output, such as the hEX PoE and CRS112-8P-4S-IN. 

The 48V2A96W provides 30% more current than the older 48POW model (48 V 1.46 A 70 W), allowing more power per port for more current hungry devices.

UK Switching Power Supply for hAP Lite:



5V
0.7A
3.5W
cable:1.5m
Micro B USB plug

MikroTik 30-60W Open Frame AC to DC Converter - GB60A-S12.

The GB60A-S12 by MikroTik is an internal 12V 5A internal power supply for the R2 revisions of their CCR1016 series routers.


GB60A-S12 Specifications:



Output Wattage  60W
Output Voltage  12V
Output Current  5A
Ripple and Noise  150mV Max
Efficiency Typical  85%

MikroTik PW48V-12V85W Open Frame Power Supply

The PW48V-12V85W 48V DC open frame power supply from MikroTik offers a 12V 7A output for use with the R2 revisions of their Cloud Core Router range or the CCR2004-1G-12S+2XS and CRS326-24S+2Q+RM

For ±48V installations, simply remove one of the current power supplies in the router and replace it with the PW48V-12V85W device.

The supported input range is from 36V to 57V. Note: To use, positive terminal must be 36 to 57V higher potential than negative terminal (eg. if the negative terminal is -48 V, the positive must be -12 to +9 V).

PW48V-12V85W Specifications:

Input Voltage: ±48V, 3A
Output Voltage: 12V, 7A
Number of DC inputs: 1 (2-pin terminal)
2-Pin terminal input voltage: 48-48V
Operating Temperature: -20°C to +60°C
Dimensions: 118 x 52mm

This device lets you use any 48V PoE source (including Passive PoE, Telecom PoE, 802.3af and 802.3at) to power RouterBOARD devices.

Simply plug any 48V PoE powered ethernet cable into one port, and any 8-30V capable RouterBOARD device into the other. This device is capable to provide high power output - up to 24W (up to 1A at 24V).

You can power it with virtually any 42-57V PoE solutions available on market today (Passive, Telecom, 802.3af and 802.3at PoE plus supported)

The device is a rugged metallic design, with high quality components and integrated heatsink design. The case also has mounting holes so you can attach it to a wall.

The device is a rugged metallic design, with high quality components and integrated heatsink design. The case also has mounting holes so you can attach it to a wall.

Ethernet shield pins are inside the Ethernet connectors, so that shielded ethernet can be used, to ground either at the converter itself, or at the devices at both ends. Supports 10/100/1000Mbps Ethernet


MikroTik RBGPOE-CON-HP Specifications:



10/100 Ethernet ports: None
10/100/1000 Ethernet ports: 2
Input Voltage: 42-57V (Passive, Telecom, 802.3af and 802.3at PoE plus supported)
Number of DC inputs: 0
Number of SIM slots: 0
Number of USB ports: 0
Output Voltage: 24 V 1 A
PoE in: 802.3af/at
SFP ports: None
SFP+ ports: None
Tested ambient temperature: -35°C to +70°C
Wireless 1 Number of chains: 0

The UP1302C-12 by MikroTik is an internal 12V 10.8A power supply for the R2 revisions of their CCR1036 series routers.


P1302C-12 Specifications:



UP1302C-12
Input Voltage: 90-264V
Input Frequency: 47-63Hz
Input Current: 3.3Arms Max
Hold-Up time: Typical 15Ms
Efficiency: Typical 90%
Current Leakage: 1mA max.
Operating Temperature range @ 130W:  0 - 70°C