Eaton OM3 Fibre Optic Patch Leads

Unlock lightning-fast 10Gb Ethernet speeds up to 300 meters.

Harness the power of 10Gb Ethernet to future-proof your network and support the most demanding applications. These high-speed, high-bandwidth fibre cables use VCSEL and LED laser light sources to deliver reliable, low-cost connectivity. Whether you're upgrading an existing LAN or building a new Fibre Channel SAN, the Eaton N806 cables have you covered.

The Eaton N806 cables are the perfect solution for IT professionals and network administrators who need to support mission-critical applications with blazing-fast, low-latency performance. Upgrade your infrastructure and take your network to new heights of speed and efficiency.

Key Features

OM3 rated for high-bandwidth performance
Backwards compatible with legacy LAN systems
Ideal for Fibre Channel storage area networks (SANs)
Compliant with IEEE 802.3ae and TIA LOMMF standards

10gb Ethernet speed to 300 meters @850nm, OM3 Rated

Use with VCSEL and LED laser light sources

High-Speed, High-Bandwidth, Low-Cost

Backward compatible with legacy LAN's

Ideal for Fibre Channel (SAN) applications

IEEE 802.3ae and TIA LOMMF compliant

The OM3 Laser-Optimized Multimode Fiber (LOMMF) "Aqua" cables, for use with 10Gb Ethernet applications. These new technology, 50/125um, ST/LC Fiber Optic cables, provide nearly three times the bandwidth over conventional 62.5um multimode fiber, with performance rivaling that of Singlemode cable, at a much reduced cost.

LOMMF cable allows 10Gb serial transmission over extended distances in the 850nm wavelength window, where low-cost Vertical Cavity Surface Emitting Lasers (VCSELs) enable a cost-effective, high-bandwidth solution. LOMMF is ideally suited for LAN's, SAN's, and high-speed parallel interconnects for head-ends, central offices, and data centers.

Features

3 Meter ( 10ft ) LC/ST, OM3 rated

Use with VCSEL and LED laser light sources

High-Speed, High-Bandwidth, Low-Cost

Backward compatible with legacy LAN's

Ideal for Fibre Channel (SAN) applications

IEEE 802.3ae and TIA LOMMF compliant

10gb Ethernet speed to 300 meters @850nm

Unlock next-generation network speeds

As network traffic continues to surge, you need fiber optic cables that can keep up. This 400G Ethernet cable delivers the blazing-fast speeds and bandwidth needed for cloud services, hyperscale data centers, and emerging telecom applications. Plus, it's backward compatible, so you can future-proof your network for an eventual 400 Gb upgrade.

Whether you're an IT manager, network engineer, or equipment manufacturer, the Eaton N820X cable is an essential component for building high-performance, future-ready networks. Say goodbye to the hassle and downtime of accidental disconnections - the aqua-colored jacket makes it easy to identify at a glance. And the LSZH jacket provides added safety in crowded or poorly ventilated spaces. Get the speed, flexibility, and reliability you need to power your mission-critical applications.

Key features

Supports 400 GbE applications up to 100 meters
Backwards compatible with 40 Gb and 100 Gb networks
Switchable LC connectors allow easy polarity conversions
Aqua-colored jacket prevents accidental disconnections
Low-smoke zero-halogen (LSZH) jacket for safety

Unlock the power of lightning-fast 400G data speeds

The Eaton N844B-12-P fibre optic cables are the perfect choice for enterprise IT professionals tasked with building out high-performance data networks. By providing the speed and reach you need for 400G applications, these cables helps you maximize your network's bandwidth and avoid costly downtime from accidental disconnects. The aqua jacket makes it easy to identify at a glance, while the LSZH construction ensures safety even in tight, poorly ventilated spaces. With the N844B-12-P, you can confidently deploy the latest high-speed networking technology.

Designed to support the blazing-fast speeds of 400 Gb Ethernet, the N844B-12-P future-proofs your data centre infrastructure. With its multimode OM3 fibre, you can transmit data and voice signals at up to 100 meters, ideal for high-density patching between main and intermediate distribution frames. And because it's backward compatible, this cable lets you seamlessly upgrade to 100 Gb or 400 Gb while still supporting your existing 10 Gb and 25 Gb networks.

Key features

Supports 400 Gb Ethernet for high-density networking
Backward compatible with 10 Gb and 25 Gb networks
OM3-rated multimode 50/125 fibre for 100m reach at 1300 nm
Aqua jacket prevents misidentification and accidental disconnects
Low-smoke zero-halogen (LSZH) jacket for safety in tight spaces

OM3-rated cable recommended for 400 Gb speeds up to 100 meters (@ 850 nm)

Switchable LC connectors allow polarity conversion without tools or re-termination

Backward compatible with 10/25/40/100 Gb networks to facilitate future-proofing

Aqua LSZH jacket allows fast, easy identification in a crowded switch or patch panel

Unlock the future of high-speed data networking

With its ability to support 400 Gb Ethernet speeds, the Eaton N846B-24-P is the future-proof solution for high-density data networking. These premium multimode fibre optic cables ensures your enterprise can handle exponentially growing bandwidth demands, transmitting data and voice signals at lightning-fast speeds up to 100 meters. Plus, it's backwards compatible with lower-speed networks, so you can upgrade your infrastructure without having to replace existing cabling.

The N846B-24-P cables are an essential upgrade for data centers, server rooms, and other high-performance networking environments. By future-proofing your infrastructure with 400 Gb Ethernet capabilities, you can avoid costly and disruptive downtime from bandwidth bottlenecks. The cable's aqua-colored jacket and LSZH construction also make it a safer, more easily identifiable choice for crowded, poorly ventilated spaces. Experience the confidence of having a networking solution that can scale with your business's growing demands.

Key features

Supports 400 Gb Ethernet speeds for lightning-fast data transmission
Designed for high-density patching in enterprise data centers
Backwards compatible with 10 Gb, 25 Gb, 40 Gb and 100 Gb networks
Factory-terminated connectors with low insertion and attenuation loss
Slim boots allow easy one-handed installation and removal
Aqua-colored jacket prevents accidental disconnects
Low-smoke zero-halogen (LSZH) jacket for safety

The MTP/MPO to 8 x LC Fan-out Cable is designed for high-performance networking in demanding environments. 

Featuring push/pull tab connectors, it allows for maximum accessibility in high-density installations, enabling quick installation and removal with one hand and no additional tools.

The slim uniboot design conserves space and simplifies cable management, while the premium-grade ceramic ferrule ensures exceptional performance for 10GbE and faster applications.

Built with a durable plastic housing, this cable delivers long-lasting reliability. 

Rated for OM3 and 40GbE (40GBASE-SR4), it is backward compatible with existing 50/125 fibre networks, providing seamless integration.

The plenum-rated jacket ensures safety and compliance, making it a robust choice for professional-grade installations.