Eaton Accessories

This Hook-and-Loop 10-Pack of Cable Ties is the must-have accessory for keeping bundles of cables manageable. They will not crimp Cat5/Cat6 Ethernet cables like nylon ties when over-tightened, and unlike nylon ties are reusable. 10 inches long by 5/8 inch wide.

The P568-000-LOCK secures your HDMI cable, maintaining a reliable link that won't fail. It's an essential accessory for any business running digital displays, ensuring your content stays up and your systems stay online and keeps your digital equipment running smoothly.

Easy to Install in Just a Few Minutes

This HDMI lock works with any HDMI cable and any device with a fixing or locking screw space above or below the HDMI port. If the device has no screw in the fixing space, one is included. Just secure the included nylon cable tie to the fixing space with the screw, and insert your HDMI cable into the cable tie clamp, pushing the clamp as close to the connector as possible. Then, plug the cable into the device’s HDMI port, and insert the cable tie into the clamp, removing all slack, so the HDMI plug cannot come loose. Removing the cable tie from the clamp allows you to unplug the cable.

This 100 Pack of Nylon Cable Ties is the must-have accessory for keeping bundles of cables manageable. At 7.5 inches long, just zip up the cable tie and clip off the remainder for a clean, organized installation. Provides a minimum tensile strength of 40 pounds (18 kilograms).

The ELWALL wall-mount kit from Eaton can be used to mount your Ellipse ECO.

The P060-02M-UK features a BS 1363 plug for AC power connection and an IEC-320-C5 connector for device compatibility. The VDE-compliant power cable connects a laptop, notebook, or other device with a three-slot C6 inlet to a PDU, UPS, or surge protector with BS 1363 outlets.

H03VV-F Jacket Is Fully VDE-Compatible for European Applications

The 0.75mm2 enhanced PVC jacket complies with VDE, CE and UKCA standards for data centers, racks, workstations and other IT applications in Europe.

Connects a notebook computer or laptop with a 3-slot C6 power inlet to a PDU or UPS system with BS 1363 outlets.

Eaton DCS001. Connectivity technology: Wired, Product colour: Black, Suitable for: Door

The ENBRKT is a sturdy steel mount which secures your access point high out of reach, shielding it from accidental damage or tampering. Meanwhile, its strategic placement can help strengthen Wi-Fi coverage in those tricky corners and dead zones. It’s recommended for offices, dorms, hotels, classrooms, small businesses and other indoor areas where you need to keep your WAP secure, organized and out of the way, as well as strengthen a Wi-Fi signal in part of an office.

Features

Designed for Cisco (low-profile and universal), Aruba and most other WAP brands

Installs high on a wall to protect router/modem/WAP from theft or tampering

Heavy-duty steel bracket allows an optimum Wi-Fi signal in all directions

Open rear cutout allows easy access to data and power cabling

Accommodates a Wide Range of WAPs, Including Cisco and Aruba

The ENBRKT fits most access-point bolt patterns and is compatible with Cisco low-profile and universal brackets. It also comes with a T-bar bracket for mounting Aruba and other WAP brands. Hardware is included for equipment installation. An open rear cutout allows easy cable routing and reduces cable clutter. The durable wall bracket comes ready for horizontal or vertical mounting on a wall or ceiling with user-provided hardware.

The ELRACK from Eaton is a versatile case is designed to securely house your power supply unit and can be installed on a 19'' industrial rack and it also protects your equipment from impacts and physical damage.

*Product may differ in appearance; Images used are for illustrative purposes only

The ENBRKTCVR is an essential accessory for any location that needs to keep its wireless equipment secure but accessible. Whether you're outfitting an office, dorm room, hotel, classroom or small business, this wall-mounted bracket ensures your critical Wi-Fi hardware stays safe, organized and out of the way.

Accommodates a Wide Range of WAPs, Including Cisco and Aruba

The ENBRKTCVR fits most access-point bolt patterns and is compatible with Cisco low-profile and universal brackets. It also comes with a T-bar bracket for mounting Aruba and other WAP brands. Hardware is included for equipment installation. Open rear and side cutouts allow easy cable routing and reduce cable clutter. The durable wall bracket comes ready for horizontal or vertical mounting on a wall or ceiling with user-provided hardware.

Locks Securely to Help Prevent Damage, Tampering or Theft

This Wi-Fi access point enclosure features a protective steel cover. It locks securely with the included key to protect its contents against theft, tampering, dust and other contaminants.

The Eaton EBMCBL72 2m EBM Cable is designed for Eaton 5PX/9PX Extended Battery Packs. It has a 2-meter cable which connects an extended battery pack.

The Eaton CBLADAPT48 cable adaptor 5PXGen1 5PX Gen2 48V. 5PX Adapter for connection of 5PXG2 48V EBM to 5PXG1 UPS.

The N785-INT-SC-MM Gigabit Multimode Fiber to Ethernet Media Converter is a compact device which lets you extend your high-speed Ethernet connection up to 550 meters (1,804 feet) using SC multimode fiber optic cabling. Because Cat5e/6 cables are limited to only 100 meters, it is more effective to use SC multimode fiber optic cabling for greater distances.

Use copper UTP cabling to connect one 850 nm N785-INT-SC-MM converter to your network device, such as a computer, and another converter to a network switch. The two converters are connected by a multimode fiber optic cable with SC connectors. The N785-INT-SC-MM supports 50/125 multimode cable up to 550 meters and 62.5/125 multimode cable up to 400 meters.

Monitoring and controlling your network nodes is easy with the converter’s advanced features, such as automatic network speed sensing, full/half-duplex auto-detection and automatic MDI/MDI-X configuration. Six LEDs indicate the converter’s Ethernet network and fiber link status at a glance.

Extends a Gigabit Ethernet Signal up to 550 m (1804 ft.) Using SC Multimode Cable

Converts UTP copper connection to duplex fiber over long distance, then back to copper at opposite end while auto-sensing the proper speed

Fiber optic technology more effective than Cat5e/6 over long distances

Supports 50/125 multimode fiber optic cabling up to 550 m

Supports 62.5/125 multimode fiber optic cabling up to 400 m

Connection requires an N785-INT-SC-MM at both ends

Advanced Monitoring and Control

Supports automatic sensing of network speed

Supports both full-duplex and half-duplex operation

Supports automatic MDI/MDI-X configuration

6 LEDs indicate network and fiber link status at a glance

Plug-and-Play Operation

No additional software or drivers required

Compact unit sets up in minutes

Durable metal housing designed to last

The N785-INT-SC-SM is a compact unit seamlessly bridges the gap between your standard copper Ethernet and singlemode fiber, allowing you to extend your network connectivity up to an incredible 12.4 miles. No more being limited by the 100-meter range of Cat5e/6 cables - the N785-INT-SC-SM gives you the distance you need to connect remote offices, secluded facility areas, or distributed workstations across multiple buildings. Whether you're providing high-speed internet to employees in hard-to-reach locations or linking your company's branch offices, this economical converter ensures your network stays strong and reliable over long distances.

N785-INT-SC-SM Product Summary - Converts copper Ethernet signal to singlemode fiber and extends it to 12.4 miles
- Supports singlemode fiber optic cable with SC connectors
- RJ45 jack supports auto-MDI/MDIZ to bridge various network devices
- Supports auto-network speed sensing and both full- and half-duplex operation
- LED indicators monitor network and fiber link status
- Plug-and-play with no software or drivers required for installation
- Requires 2 units to extend an Ethernet network connection

Supports Auto-Sensing of Network Speed and Other Advanced Functions Monitoring and controlling your network nodes is easy with the N785-INT-SC-SM’s advanced features, such as automatic network speed sensing, full/half-duplex auto-detection and automatic MDI/MDIZ configuration. Six LEDs indicate the converter’s Ethernet network and fiber link status at a glance.

Supports Singlemode Fiber Cable with SC Connectors

Two N785-INT-SC-SM converters are needed to extend an Ethernet network connection. Singlemode fiber optic cabling with SC ends (such as N356-Series, sold separately) connect the two converters. Copper Cat5e/6 cabling (see N201-Series, sold separately) connects one converter to your network device, such as a server, and the other converter to a network switch.

Completely Plug-and-Play with No Additional Software Required for Connection

The compact metal converter is easy to install and set up with no software or drivers required. The included power supply connects to a convenient AC outlet with no computer or other signal source needed.

The N785-INT-LC-MM seamlessly bridges the gap, letting you reliably transmit data, voice, and video over extended runs where copper falls short. Whether you're upgrading an existing network or building new, this converter has you covered with plug-and-play simplicity.

Supports Both 50/125 and 62.5/125 Multimode Cable Use copper UTP cabling to connect one 850 nm N785-INT-LC-MM converter to your network device, such as a computer, and another converter to a network switch. The two converters are connected by a multimode fiber optic cable with LC connectors. The N785-INT-LC-MM supports 50/125 multimode cable up to 550 meters and 62.5/125 multimode cable up to 400 meters (1,312 ft.).

Supports Auto-Sensing of Network Speed and Other Advanced Functions Monitoring and controlling your network nodes is easy with the N785-INT-LC-MM’s advanced features, such as automatic network speed sensing, full/half-duplex auto-detection and automatic MDI/MDI-X configuration. Six LEDs indicate the converter’s Ethernet network and fiber link status at a glance.

Extends a Gigabit Ethernet Signal up to 550 m (1,804 ft.) Using LC Multimode Cable

- Converts UTP copper connection to duplex fiber over long distance, then back to copper at opposite end while auto-sensing the proper speed

Fiber optic technology more effective than Cat5e/6 over long distances

Supports 50/125 multimode fiber optic cabling up to 550 m

Supports 62.5/125 multimode fiber optic cabling up to 400 m

Connection requires an N785-INT-LC-MM at both ends

Advanced Monitoring and Control

Supports automatic sensing of network speed

Supports both full-duplex and half-duplex operation

Supports automatic MDI/MDI-X configuration

6 LEDs indicate network and fiber link status at a glance

Plug-and-Play Operation

No additional software or drivers required

Compact unit sets up in minutes

Durable metal housing designed to last

The N785-INT-SC lets you break free and extends your ethernet connection to reach up to 2,000 meters. With its multimode fiber optic connectivity, you can effortlessly connect remote devices and locations without the hassle of running additional Cat5e/6 cables. Because Cat5e/6 cables are limited to only 100 meters, it is more effective to use SC multimode fiber optic cabling for greater distances.

Use copper UTP cabling to connect one 1310 nm N785-INT-SC converter to your network device, such as a computer, and another converter to a network switch. The two converters are connected by a multimode fiber optic cable with SC connectors. The N785-INT-SC supports 50/125 multimode cable up to 2,000 meters and 62.5/125 multimode cable up to 400 meters

Monitoring and controlling your network nodes is easy with the converter’s advanced features, such as automatic network speed sensing, full/half-duplex auto-detection and automatic MDI/MDI-X configuration. Six LEDs indicate the converter’s Ethernet network and fiber link status at a glance.

Extends a Gigabit Ethernet Signal up to 2,000 m (1804 ft.) Using SC Multimode Cable

Converts UTP copper connection to duplex fiber over long distance, then back to copper at opposite end while auto-sensing the proper speed

Fiber optic technology more effective than Cat5e/6 over long distances

Supports 50/125 multimode fiber optic cabling up to 2000 m

Supports 62.5/125 multimode fiber optic cabling up to 400 m

Connection requires an N785-INT-SC at both ends

Advanced Monitoring and Control

Supports automatic sensing of network speed

Supports both full-duplex and half-duplex operation

Supports automatic MDI/MDI-X configuration

6 LEDs indicate network and fiber link status at a glance

Plug-and-Play Operation

No additional software or drivers required

Compact unit sets up in minutes

Durable metal housing designed to last

The CSHANDLEKIT Mobile Cart Conversion Kit includes a reversible handle, rolling caster wheels and power cord manager that easily attach to your AC or USB charging station.* Perfect for schools, offices, warehouses, healthcare facilities and other locations where multiple tablets or Chromebooks are used regularly, the CSHANDLEKIT allows for smooth mobility of your charging station. The four rolling casters are non-marking for environments where this is mandatory, and two of the casters lock into place for maximum stability at rest. The casters, easy-grip handle and convenient power cord manager mount to the charging station using the included hardware. The CSHANDLEKIT supports a maximum load capacity of 350 lbs (158.8 kgs).

*CS16USB charging stations excluded

The Eaton TFMR11Ki Eaton Transformer 11000i is designed to provide both surge protection and power conditioning for PCs, ensuring your equipment remains safe and operates efficiently. With its robust circuit protection, this transformer guards against electrical overloads and short circuits, offering peace of mind for users.

*Product may differ in appearance; Images used are for illustrative purposes only