Compulocks Arm Mounts

The Compulocks 660REACHPMIP109 iPad 10th-11th (A16) PowerMove Articulating Arm Mount provides a flexible mounting arrangement for compatible iPad models. It combines a silver Reach articulating arm with a black PowerMove mount that supports cable-free charging, allowing the tablet to remain powered while mounted. The arm provides adjustable positioning for desk, countertop or other suitable mounting applications.

Key Features of Compulocks 660REACHPMIP109 PowerMove articulating arm mount for iPad
Compatible with iPad 10th generation 10.9-inch and iPad 11th generation A16 11-inch
Cable-free charging capability
Articulating arm for adjustable tablet positioning
Locking mechanism for added tablet security
Flexible and adjustable arm construction
Supports 10.90" (27.69 cm) displays, ensuring proper alignment and dependable hold for smooth operation
Articulating Reach Arm The Reach arm provides adjustable positioning for the mounted tablet, making it possible to move the display into a suitable viewing or interaction position. Its articulating construction is suited to applications where the tablet needs to be repositioned during use.

Compatible iPad Models The mount supports the iPad 10th generation with a 10.9-inch display from 2022, including model numbers A2757 and A2777. It also supports the iPad 11th generation with A16 and an 11-inch display from 2025, including model numbers A3354, A3355 and A3356.

Mounting Applications The articulating arm mount can be used for tablet installations in locations such as reception areas, retail environments, workstations and service counters. Its adjustable arm allows the tablet to be positioned for convenient interaction while keeping the mounting arrangement fixed in place.

Cable-Free Charging The PowerMove mount incorporates cable-free charging for compatible iPad models, helping keep the tablet powered without requiring a charging cable to remain connected directly to the device. This provides a practical arrangement for installations where the iPad remains mounted for extended periods.

The Compulocks 159W209APXW iPad 10th-11th (A16) Gen Apex Enclosure Flex Arm Mount - White combines a lockable metal enclosure with a bendable Flex Arm for positioning a compatible iPad on countertops, desks or walls. The Apex enclosure provides keyed access and keeps the tablet securely held while precision-cut openings leave the front and rear cameras and sensors available for use. The Flex Arm can be mounted to a suitable flat surface and routed with cables up to 10 mm in diameter, providing a practical arrangement for interactive displays, reception areas, service points and shared workspaces.

Key Features of Compulocks 159W209APXW White Apex enclosure with Flex Arm mount
Compatible with iPad 10th generation 10.9-inch models A2757 and A2777
Compatible with iPad 11th generation A16 11-inch models A3355 and A3356
Lockable high-grade aluminium enclosure
Keyed access with 2 enclosure keys
Extending and bendable Flex Arm for adjustable positioning
Suitable for countertop, desk and wall mounting
Through-arm cable management for cables up to 10 mm in diameter
Front and rear cameras and sensors remain exposed
Direct access to the iPad charging connection
Compatible with security cable locks
Lockable Apex Enclosure The Apex enclosure uses a keyed locking mechanism to help keep the iPad secured within its frame. The metal construction provides a dedicated mounting structure while the open areas around the tablet maintain access to the cameras, sensors and charging connection.

Bendable Flex Arm The Flex Arm provides a movable mounting point that can be adjusted to suit the viewing position required. Its bendable form is useful for corners, countertops and other locations where the tablet needs to be positioned away from a fixed mounting point.

Surface and Wall Mounting The mounting arm can be fixed to suitable flat surfaces, including countertops and walls. The enclosure also supports 75 x 75 mm and 100 x 100 mm VESA mounting patterns, providing additional flexibility when pairing the iPad mount with compatible mounting equipment.

Cable Management The Flex Arm incorporates through-arm cable management for cables up to 10 mm in diameter. This provides a route for charging and connection cables through the mounting structure while keeping direct access to the iPad charging port available when the tablet is secured.

10th and 11th Generation Compatibility The enclosure supports the 2022 iPad 10th generation 10.9-inch models A2757 and A2777, together with the 2025 iPad 11th generation A16 models A3355 and A3356.

The Compulocks 159W209IPDSW iPad 10th-11th (A16) Gen Space Enclosure Flex Arm Mount White combines a lockable aluminium enclosure with a flexible arm for convenient tablet positioning on desks, counters, walls and other suitable flat surfaces. A keyed lock helps keep the tablet secured within the enclosure, and cable management through the arm accommodates cables up to 10 mm in diameter. The enclosure also allows continuous charging and peripheral connections while the iPad remains mounted.

Key Features of Compulocks 159W209IPDSW Space enclosure with flexible arm mount for compatible iPad models
Compatible with iPad 10th generation 10.9-inch models A2757 and A2777
Compatible with iPad 11th generation 11-inch A16 models
High-grade aluminium enclosure
Keyed enclosure lock with 2 keys included
90-degree bendable Flex Arm mount
Desk, countertop and wall mounting options
Through-arm cable management for cables up to 10 mm in diameter
Supports continuous charging while the iPad remains mounted
Peripheral cables can remain connected while the tablet is secured
Rounded enclosure edges and open corners allow airflow around the iPad
Compatible with a security cable lock
Adjustable Flex Arm The flexible arm provides a 90-degree bendable mounting arrangement, allowing the iPad to be positioned at a suitable angle for viewing and interaction. Its compact footprint makes it useful in corners and locations where available counter space is limited.

Lockable Aluminium Enclosure The aluminium Space enclosure holds the compatible iPad securely and uses a keyed locking mechanism to help prevent unauthorised removal. Rounded edges and open corners provide ventilation around the tablet, while the enclosure retains access to selected buttons and connection points.

Flexible Mounting Locations The Flex Arm can be secured to suitable flat surfaces, making the assembly suitable for countertops, desks and wall installations. The 100 x 100 mm VESA mounting interface provides another mounting reference for compatible hardware, while an adhesive base option is available separately for installations where screw fixing is not preferred.

Cable Management Cables can be routed through the arm to reduce exposed cable runs around the mounting area. The internal route accommodates Lightning cables or cable extensions up to 10 mm in diameter, while the enclosure permits charging and peripheral connections without removing the iPad from its mount.

Compatible iPad Generations The enclosure is suitable for the 2022 iPad 10th generation 10.9-inch models A2757 and A2777 and the 2025 iPad 11th generation with A16 processor. The enclosure specification lists a 1.68 lb weight and dimensions of approximately 309.6 x 24.5 x 232.2 mm.

The Compulocks 660REACH209IPDSW iPad 10th-11th (A16) Space Enclosure Articulating Arm Mount provides a secure and adjustable mounting setup for compatible iPad models. The white enclosure uses a lockable aluminium frame with rounded edges and open corners, while the Reach articulating arm allows the tablet to be tilted, swivelled, extended and retracted for convenient positioning.

Key Features of Compulocks 660REACH209IPDSW Space locking enclosure with Reach articulating arm
Compatible with iPad 10th generation 10.9-inch and iPad 11th generation A16 11-inch
Tilt, pan, swivel, extend and retract adjustment
Tilt range from -30° to 75°
Arm extends up to approximately 23.6 inches (60 cm)
75 x 75 mm and 100 x 100 mm panel mounting interfaces
Integrated cable management
Quick slide-on and slide-off display mounting
Continuous tablet charging while mounted
Two enclosure keys included
Compatible iPad Models The enclosure supports the iPad 10th generation 10.9-inch model from 2022 and the iPad 11th generation with A16 from 2025. The listed compatible model numbers include A2757 and A2777 for the 10th generation, and A3354, A3355 and A3356 for the 11th generation A16 model.

Lockable Space Enclosure The Space enclosure uses an aluminium construction with a key-operated lock and rounded edges. Open corners provide ventilation around the tablet, while the enclosure permits access to selected buttons and inputs. The iPad can remain connected to charging and peripheral cables while secured in the enclosure.

Adjustable Articulating Arm The Reach arm provides multiple positioning options for the mounted tablet, including tilt, swivel, extension and retraction. The arm can extend to approximately 60 cm and can be adjusted to place the iPad at a suitable viewing or interaction position.

Flexible Installation The Reach arm can be clamped securely to a desk or countertop. It can also be fixed to a table using a bolt-down installation or an existing wire pass-through hole. A wall-mount option is available with an additional bracket, providing further installation flexibility.

Cable Access and Management The enclosure allows charging and peripheral connections while the iPad remains mounted. Cable management is incorporated into the mounting system to help route connected cables through the installation.

The Compulocks 159W VESA Flex Arm Mount provides a flexible mounting option for tablet enclosures and compatible VESA displays. Its steel construction and bendable arm allow the mounted device to be positioned in portrait or landscape orientation, while the integrated cable routing helps keep charging and data cables routed through the arm.

Key Features of Compulocks 159W 100 x 100 mm VESA compatible mount
Flexible and bendable arm for adjustable positioning
12-inch arm reach
Supports portrait and landscape orientations
Through-arm cable management for cables up to 10 mm in diameter
Suitable for countertop, flat-surface and wall mounting
Maximum load of 3 lb / 1.4 kg
Flexible Arm Positioning The bendable arm allows a mounted tablet or compatible display to be positioned according to the installation requirements. Its flexibility is useful in corners, against walls and in areas where available countertop space is limited.

VESA Compatibility The mount uses a 100 x 100 mm VESA mounting pattern, allowing it to be paired with compatible Compulocks tablet enclosures and other suitable VESA equipment. The arm supports installations on countertops, flat surfaces and walls.

Cable Management Cables can be routed through the arm, with the cable management channel accommodating cables or extensions up to 10 mm in diameter. This provides a practical route for charging and connection cables between the mounted device and the installation surface.

The Compulocks 827B is a black swing arm mounting system that provides adjustable positioning for compatible VESA-mounted enclosures and devices. Its articulated arm allows the mounted display to rotate, swivel and tilt, while the wall-mounted design provides a practical way to position a tablet or other compatible device for interactive applications, information displays and work areas.

Key Features of Compulocks 827B 100x100mm VESA compatible mounting
Rotating, swivelling and tilting movement
Up to 210° rotation
Up to 180° rotation at other arm joints
Maximum load of 4.8 lb
Maximum screen size of 15 inches
Wall mounting installation
Adjustable arm hinge tension
VESA Compatibility The swing arm supports 100x100mm VESA compatible mounts, allowing it to be paired with a range of Compulocks enclosures and other compatible mounting components. This provides flexibility when configuring tablet and display installations.

Adjustable Swing Arm The articulated arm provides multiple movement points for positioning the attached device. The mounting system supports rotation, swivelling and tilting, allowing the screen to be adjusted towards different users or viewing positions.

Load and Screen Capacity The Compulocks specification sheet lists a maximum load of 4.8 lb and a maximum screen size of 15 inches. These limits provide a reference when selecting a compatible enclosure or VESA-mounted device for the arm.

Wall Mounting The swing arm is intended for wall mounting and can be installed using the supplied mounting hardware. Its articulated construction allows the attached device to be moved from the wall-mounted position to suit different viewing requirements.

The Compulocks 159B VESA Flex Arm Mount Black provides a flexible mounting option for tablets and compatible displays in countertop, wall and other flat-surface installations. Its bendable arm allows the mounted device to be positioned in portrait or landscape orientation, while the 100 x 100 mm VESA mount supports compatible tablet enclosures and displays. The arm also provides internal cable routing for cables up to 10 mm in diameter, helping keep charging or connection cables routed through the mounting arm.

Key Features of Compulocks 159B 100 x 100 mm VESA compatible mounting plate
Bendable flexible arm with approximately 12-inch reach
Supports portrait and landscape orientations
Through-arm cable management for cables up to 10 mm in diameter
Suitable for countertop and wall mounting
Supports displays up to 3 lb / 1.4 kg
Suitable for screens up to 13 inches
Flexible Positioning The bendable arm provides approximately 12 inches of reach, making it suitable for installations where the viewing position needs to be adjusted. Its flexible construction is particularly useful around corners and in areas where countertop space is limited.

VESA Compatibility The 100 x 100 mm VESA mounting plate supports compatible tablet enclosures and VESA-compatible displays. The mount can accommodate portrait or landscape positioning, providing flexibility for different viewing requirements.

Cable Management Cables can be routed through the mounting plate and flexible arm, with the cable channel supporting cables or extensions up to 10 mm in diameter. This allows charging and connection cables to be routed through the arm rather than left exposed around the mounting area.

Mounting Options The Flex Arm can be installed on countertops or walls and is suitable for tablet kiosk applications. The mounting hardware and plates provide the components required for securing the arm and attaching a compatible 100 mm VESA enclosure or display.

The Compulocks 827W provides an adjustable swing arm mounting option for compatible VESA tablet enclosures and interactive displays. The white arm can be installed on a wall, countertop or other flat surface, while its two-joint construction allows the mounted device to be positioned for landscape or portrait viewing. Tilt, pan, swing and rotation adjustments provide flexibility for interactive installations where screen position needs to be changed.

Key Features of Compulocks 827W 100x100mm VESA compatible
High-grade steel construction
Two-joint adjustable arm
Tilt, pan, swing and rotation movement
90-degree rotation for landscape or portrait viewing
Arm extends up to 10.75 inches from the wall
Suitable for compatible Compulocks tablet enclosures
Can be mounted to a wall, countertop or flat surface
VESA Compatibility The swing arm supports 100x100mm VESA mounting, allowing it to be paired with compatible Compulocks tablet enclosures and other suitable VESA-mounted equipment. The mounting interface provides a straightforward way to attach a supported enclosure to the articulated arm.

Adjustable Swing Arm The two-joint arm provides tilt, pan and swing movement for flexible screen positioning. The arm extends up to 10.75 inches from the wall, allowing the attached tablet or display to be brought forward and repositioned according to the installation requirements.

Landscape and Portrait Viewing The mount supports screen rotation for landscape or portrait orientation, making it suitable for interactive displays where the viewing format may vary. The articulated joints also allow the display to be adjusted horizontally and vertically.

Mounting Options The arm can be mounted to a wall, countertop or other flat surface. Its adjustable construction is particularly useful for installations in corners, beneath cabinets or in areas where available counter space is limited.

The Compulocks 159W209SWLW combines a white Swell enclosure for the 10.9-inch iPad 10th generation with a flexible arm for secure and adjustable countertop mounting. The metal enclosure uses tamper-proof side screws to hold the tablet in place, while the arm provides flexible positioning and supports VESA mounting for a range of interactive tablet installations.

Key Features of Compulocks 159W209SWLW Compatible with Apple iPad 10th generation 10.9-inch
Flexible and extendable arm
Adjustable height and viewing angle
75 x 75 mm and 100 x 100 mm VESA mounting patterns
Aluminium back plate and steel front plate
Front and rear cameras and sensors remain accessible
Direct access to the iPad USB-C port
Cable management supports continuous charging while mounted
Suitable for countertop and surface-mounted installations
iPad Compatibility The Swell enclosure is compatible with the Apple iPad 10th generation 10.9-inch from 2022, including model numbers A2757 and A2777, as well as the Apple iPad 11th generation with A16 from 2025, including model numbers A3354, A3355 and A3356.

Swell Security Enclosure The Swell enclosure features a metal frame secured with tamper-proof screws positioned along the sides. The enclosure provides protection around the tablet while maintaining access to the front and rear cameras, sensors and USB-C connection.

Flexible Arm Mount The extendable flexible arm provides adjustable height and viewing angles, allowing the iPad to be positioned according to the requirements of the installation. The mount supports both 75 x 75 mm and 100 x 100 mm VESA patterns.

Charging and Cable Management The enclosure provides direct access to the iPad USB-C port and supports continuous charging while the tablet remains mounted. Cable management through the arm accommodates suitable charging cables or extensions, helping route the connection between the tablet and mounting surface.

The Compulocks 159W102IPDSW combines a Space enclosure for the 10.2-inch Apple iPad with a flexible arm mount in a white finish. The enclosure provides a secure fit while allowing continuous charging and peripheral connections, while the bendable arm can be mounted to a countertop, flat surface or wall for interactive tablet installations.

Key Features of Compulocks 159W102IPDSW Compatible with Apple iPad 7th, 8th and 9th generation 10.2-inch models
Space enclosure with rounded edges and open corners
White finish
High-grade aluminium construction
90-degree bendable Flex Arm mount
100 x 100 mm VESA mounting pattern
Quick lock and unlock keyed security
Through-arm cable management for cables up to 10 mm in diameter
Allows peripheral cables to remain connected while installed
iPad Compatibility The Space enclosure is compatible with the 10.2-inch Apple iPad 7th, 8th and 9th generations. Supported models include the 2019 iPad 7th generation, the 2020 iPad 8th generation and the 2021 iPad 9th generation, providing a secure enclosure for these tablet models.

Space Security Enclosure The Space enclosure features rounded edges and open corners, with limited access to the iPad's buttons and inputs. Its keyed locking mechanism helps keep the tablet secured in the enclosure, with two enclosure keys included.

Flexible Arm Mount The bendable Flex Arm can be mounted on a countertop, flat surface or wall, making it suitable for interactive tablet displays and kiosk installations. The 100 x 100 mm mounting pattern provides compatibility with the enclosure and suitable VESA mounting arrangements.

Cable Management and Charging The mounting arm provides through-arm cable management for Lightning cables or cable extensions up to 10 mm in diameter. The iPad can remain continuously charged while secured in the enclosure, with peripheral cables able to remain connected during use.

The Compulocks 159B209SWLB combines a Swell secured enclosure with a flexible countertop arm to provide a practical mounting option for the 10.9-inch iPad 10th generation. The black metal enclosure secures the tablet with tamper-resistant screws, while the flexible arm allows the screen to be positioned for comfortable viewing and interaction in countertop installations.

Key Features of Compulocks 159B209SWLB Swell secured enclosure with tamper-resistant screw fastening
Flexible countertop arm for adjustable positioning
100 x 100 mm and 75 x 75 mm VESA compatibility
Exposed front and rear cameras and sensors
Access for charging cables while the iPad is mounted
iPad Compatibility The Swell enclosure is compatible with the Apple iPad 10th generation 10.9-inch model from 2022, including model numbers A2757 and A2777. The enclosure is also compatible with the 11-inch iPad 11th generation with A16, the model numbers for this are thr A3354, A3355, A3356.

Swell Security Enclosure The Swell enclosure uses two tamper-resistant screws to hold the iPad securely in place. Its metal frame provides coverage around the tablet while leaving the display, cameras and sensors accessible for normal interactive use.

Flexible Arm Mount The Flex countertop arm provides adjustable positioning for the mounted iPad and supports 100 x 100 mm VESA mounting. This allows the screen to be positioned for different countertop applications, including customer-facing displays, interactive kiosks, reception areas and point-of-service installations.

Charging and Accessibility Openings in the enclosure provide access to the iPad cameras, sensors and charging connection, allowing the tablet to remain powered while mounted. The enclosure and arm combination keeps the screen accessible for touch-based interaction.

The Compulocks 159W11GAPX9W combines a white Apex enclosure for the 11-inch Samsung Galaxy Tab A9+ with a flexible arm mount for secure countertop or wall-mounted installations. The metal enclosure provides keyed security while keeping the tablet's front and rear cameras and sensors accessible, and the flexible arm allows the screen to be positioned for interactive use.

Key Features of Compulocks 159W11GAPX9W Compatible with Samsung Galaxy Tab A9+ 11-inch tablet
Compatible with Galaxy Tab A9+ 2023 models SM-X210, SM-X215 and SM-X216B
Also compatible with Galaxy Tab A11+ 2025 models SM-X230, SM-X235 and SM-X236B
Apex metal enclosure with keyed locking mechanism
Flexible arm for adjustable positioning
100 x 100 mm and 75 x 75 mm VESA mounting compatibility
Front and rear cameras and sensors remain exposed
Integrated cable management
Apex Security Enclosure The Apex enclosure uses a metal frame with keyed access to help secure the Galaxy Tab during mounted use. The front and rear cameras and sensors remain exposed, allowing the tablet to retain its camera and sensor functions while installed.

Flexible Arm Mount The flexible arm provides adjustable positioning for the mounted tablet and supports both 100 x 100 mm and 75 x 75 mm VESA mounting patterns. It can be installed on a countertop or wall, making it suitable for interactive tablet displays and kiosk applications.

Cable Management and Charging Integrated cable management provides a route for the tablet's charging cable while keeping the connection accessible. The enclosure allows the tablet to remain connected to power during mounted use.

The Compulocks Galaxy Tab A9+ Apex Enclosure Flex Arm Mount combines a secure tablet enclosure with a flexible countertop mounting arm for interactive tablet installations. The Apex enclosure accommodates the Samsung Galaxy Tab A9+ 11-inch tablet, while the bendable arm provides flexible positioning on a countertop or other flat surface. Cable routing through the mount and arm helps keep charging connections organised, making the mount suitable for retail counters, check-in points, kiosks and other customer-facing applications.

Key Features of Compulocks 159B11GAPX9B Compatible with Samsung Galaxy Tab A9+ 11-inch tablet
Apex metal tablet enclosure in black
Flexible 12-inch countertop mounting arm
100 x 100 mm VESA compatible mounting system
Supports portrait and landscape tablet positioning
Can be mounted to flat countertop surfaces
Internal cable routing through the mount and arm
Accommodates cables or cable extensions up to 10 mm in diameter
Galaxy Tab A9+ Compatibility The Apex enclosure is made specifically for the Samsung Galaxy Tab A9+ 11-inch tablet, including the 2023 model with model numbers SM-X210, SM-X215 and SM-X216B. The enclosure holds the tablet securely while leaving the touchscreen available for interactive use.

Flexible Arm Positioning The bendable Flex Counter Top arm provides approximately 12 inches of reach and allows the mounted tablet to be positioned according to the requirements of the installation. The arm supports both portrait and landscape orientations and can be positioned around corners or where countertop space is limited.

Apex Tablet Enclosure The metal Apex enclosure provides a secure housing for the Galaxy Tab A9+ while maintaining access to the tablet display, cameras and sensors. Its black finish matches the Flex Counter Top arm for a consistent appearance across the installation.

Cable Management The mounting system allows cables to pass through the enclosure and mounting arm, helping route charging connections towards the countertop. The arm accommodates cables or cable extensions up to 10 mm in diameter.

The Compulocks 159B11PAPX4B iPad Pro M4 11in (2024) Apex Enclosure Flex Arm Mount in Black combines a secure metal tablet enclosure with a flexible arm for countertop or wall-mounted installations. The enclosure is made for the 11-inch iPad Pro with M4 chip from 2024 and provides a secure housing while keeping the touchscreen available for interaction. The flexible arm allows the tablet to be positioned in portrait or landscape orientation for retail, reception, self-service and other interactive applications.

Key Features of Compulocks 159B11PAPX4B Compatible with 11-inch Apple iPad Pro M4 (2024)
Compatible with iPad Pro M4 models A2836, A2837 and A3006
Secure Apex metal enclosure
Flexible countertop arm mount
Supports portrait and landscape orientations
Countertop or wall-mountable
100 x 100 mm VESA mounting compatibility
iPad Pro M4 Compatibility The Apex enclosure is specifically made for the 11-inch iPad Pro with M4 from 2024. Compatible tablet model numbers include A2836, A2837 and A3006 and the iPad Pro M5 11" 2025, A3357, A3358, A3359, allowing the enclosure to securely hold the appropriate iPad while leaving the touchscreen accessible for everyday interaction.

Apex Enclosure The metal Apex enclosure provides a secure housing for the iPad Pro and has a black finish suited to a range of commercial and public-facing installations. The enclosure is shaped specifically for the 11-inch iPad Pro M4 and provides access to the display for interactive use.

Flexible Arm Mount The Flex Counter Top arm provides adjustable positioning for the mounted iPad. Its flexible construction allows the tablet to be positioned in portrait or landscape orientation, making it suitable for applications where the viewing angle or position needs to be adjusted.

The Apex with the Flex arm provides a compact and secure solution featuring a stylish metal frame, convenient keyed access, and an adaptable extending arm for versatile positioning. They ensure full camera and sensor functionality while allowing direct access to charging cables, making them perfect for sleek and interactive displays.

The Compulocks 159B510APXB combines an Apex enclosure for Microsoft Surface Go tablets with a flexible countertop arm, providing a secure and adjustable mounting option for interactive tablet installations. The black metal enclosure keeps the tablet securely positioned while maintaining access to the cameras, sensors and charging connection.

Key Features of Compulocks 159B510APXB Compatible with Microsoft Surface Go generations 1 through 4
Supports Surface Go 10-inch and 10.5-inch models
Apex metal enclosure with quick-keyed access
Flexible countertop arm for adjustable positioning
100 x 100 mm VESA compatible mount
Front and rear cameras and sensors remain accessible
Cable access allows continuous charging while mounted
Microsoft Surface Go Compatibility The Apex enclosure supports Microsoft Surface Go generations 1 through 4. Compatibility includes the original Surface Go 10-inch model from 2018 with the 4415Y, Surface Go 2 10.5-inch from 2020 with the 4425Y, Surface Go 3 10.5-inch from 2021 and Surface Go 4 10.5-inch from 2023.

Apex Security Enclosure The Apex enclosure uses a metal frame with keyed access to help keep the mounted Surface Go secure. The enclosure provides access to the tablet's cameras and sensors, allowing the device to retain its core functions while mounted.

Flexible Countertop Mount The flexible arm allows the Surface Go to be positioned for different viewing and interaction requirements. The arm is compatible with a 100 x 100 mm VESA mounting pattern, making it suitable for countertop applications where an adjustable tablet position is required.

Charging and Accessibility The enclosure provides access for charging cables, allowing the Surface Go to remain powered while mounted. The open areas around the cameras, sensors and display help maintain access to the tablet's interactive features during use.

The Compulocks 159B87GAPX9B combines a black Apex enclosure for the 8.7-inch Samsung Galaxy Tab A9 with a flexible countertop arm, providing a secure and adjustable mounting option for interactive tablet installations. The metal enclosure keeps the tablet securely positioned while providing access to the cameras, sensors and charging connection.

Key Features of Compulocks 159B87GAPX9B Compatible with Samsung Galaxy Tab A9 8.7-inch tablets
Compatible with Galaxy Tab A9 model numbers SM-X110 and SM-X115
Apex metal enclosure with quick-keyed access
Flexible countertop arm for adjustable tablet positioning
100 x 100 mm VESA compatible mounting arm
Access to the tablet's cameras and sensors
Charging cable access while the tablet remains mounted
Galaxy Tab Compatibility The Apex enclosure is made for the 8.7-inch Samsung Galaxy Tab A9. It is compatible with the 2023 Galaxy Tab A9 models SM-X110 and SM-X115, and the A11 models SM-X133, SM-X135, providing a close fit around the tablet while keeping the touchscreen available for interactive use.

Apex Security Enclosure The black Apex enclosure uses a metal frame and quick-keyed access to help secure the Galaxy Tab A9 during mounted use. The enclosure leaves the tablet's cameras and sensors accessible, allowing the device to retain its key functions while installed.

Flexible Countertop Arm The Flex countertop arm features a bendable arm that can be positioned to suit different viewing and interaction requirements. Its 100 x 100 mm VESA-compatible mounting arrangement allows the tablet to be installed on a suitable flat surface or countertop.

Charging and Cable Access The enclosure allows the Galaxy Tab A9 to remain connected to a charging cable while mounted. The Flex arm also provides cable routing through the mount and arm for cables or extensions up to 10 mm in diameter.

Countertop Applications The combination of the secured enclosure and flexible arm is suitable for retail counters, check-in stations, information points, kiosks and other interactive installations where the Galaxy Tab A9 needs to remain accessible to users.

The Compulocks 159B109GAPXB Galaxy Tab S9/S9FE 10.9in Apex Enclosure Flex Arm Mount Black combines a secure tablet enclosure with a flexible countertop mounting arm for convenient tablet positioning in retail, hospitality, reception and interactive display environments. The Apex enclosure holds the compatible Galaxy Tab securely while providing access to the device screen and ports, and the flexible arm allows the tablet to be positioned for different viewing angles and orientations.

Key Features of Compulocks 159B109GAPXB Compatible with Samsung Galaxy Tab S9 and S9 FE
Supports 10.9-inch Galaxy Tab S9 FE and 11-inch Galaxy Tab S9 models
Flexible countertop mounting arm
Supports portrait and landscape tablet positioning
Provides approximately 12 inches of flexible arm reach
Through-arm cable routing for cables up to 10 mm in diameter
Galaxy Tab Compatibility The Apex enclosure is made for compatible Samsung Galaxy Tab models and is listed for the Galaxy Tab S9 and Galaxy Tab S9 FE. The enclosure keeps the tablet secured while leaving the display available for touch interaction, making it suitable for customer-facing and information-point applications.

Flexible Countertop Mount The flexible arm provides a practical way to position the tablet above a countertop or other suitable flat surface. Its bendable construction allows the display to be adjusted for different users and viewing positions while supporting both portrait and landscape orientations.

Apex Enclosure The Apex enclosure provides a secure housing for the compatible Galaxy Tab while maintaining access to the screen for interactive use. Its black finish complements the matching flex arm and provides a consistent appearance for countertop installations.

Cable Management The mounting arm incorporates cable routing through the arm, helping cables pass from the tablet towards the mounting surface without requiring them to run externally along the arm. The cable channel accommodates cables up to 10 mm in diameter.

The Compulocks 159B13PAPX4B iPad Pro M4 13in (2024) Apex Enclosure Flex Arm Mount in Black combines a secure Apex enclosure with a flexible arm for mounting the 13-inch iPad Pro in countertop and other fixed installations. The enclosure is made for the 2024 iPad Pro M4 and provides a secure housing while keeping the tablet available for touchscreen interaction. The flexible arm allows the tablet to be positioned for different viewing requirements, making the mount suitable for retail counters, reception areas, kiosks, check-in points and interactive displays.

Key Features of Compulocks 159B13PAPX4B Compatible with Apple iPad Pro M4 13-inch (2024)
Compatible with iPad Pro models A2925, A2926 and A3007
Apex metal tablet enclosure
Flexible countertop mounting arm
Supports portrait and landscape tablet orientations
Approximately 12-inch flexible arm reach
100 x 100 mm VESA mounting compatibility
Enclosure weight of approximately 2.8 lb
iPad Pro M4 Compatibility The Apex enclosure is specifically compatible with the 13-inch iPad Pro M4 introduced in 2024. Supported Apple model numbers are A2925, A2926 and A3007 and the iPad Pro M5 13" 2025. Supported model numbers are A3360, A3361, A3362, providing a secure fit for the compatible tablet while keeping the touchscreen accessible for interactive use.

Apex Enclosure The metal Apex enclosure provides a secure housing for the iPad Pro and has a black finish suitable for commercial and public-facing installations. The enclosure is formed for the 13-inch iPad Pro and provides access to the tablet display for touchscreen interaction.

Flexible Arm Mount The Flex Counter Top arm provides approximately 12 inches of reach and allows the mounted iPad to be positioned according to the requirements of the installation. The flexible arm supports portrait and landscape orientations, providing different viewing positions for users.

VESA Mounting The mounting system uses a 100 x 100 mm VESA-compatible connection, allowing the enclosure and arm assembly to be integrated with compatible mounting hardware. This makes it suitable for fixed tablet installations on appropriate countertop or other mounting surfaces.

The Compulocks 159B13APXB iPad Air M2 13in (2024) Apex Enclosure Flex Arm Mount in Black combines a secure Apex enclosure with a flexible countertop mounting arm for the 13-inch iPad Air M2. The enclosure holds the compatible iPad securely while keeping the touchscreen, cameras and essential controls accessible, while the flexible arm provides adjustable positioning for different viewing requirements.

Key Features of Compulocks 159B13APXB Compatible with Apple iPad Air M2 13-inch (2024)
Compatible with iPad Air M2 models A2898, A2899 and A2900
Flexible countertop mounting arm
Supports portrait and landscape tablet orientations
Approximately 12-inch flexible arm reach
100 x 100 mm VESA mounting compatibility
Enclosure weight of approximately 2.83 lb
iPad Air M2 Compatibility The Apex enclosure is specifically compatible with the 13-inch iPad Air M2 introduced in 2024. Supported Apple model numbers include A2898, A2899 and A2900, also the iPad Air M3 13" 2025 A3268, A3269, A3271 and the iPad Air M4 13" 2026 A3462, A3464, A3461 providing a secure fit while keeping the tablet available for touchscreen interaction.

Apex Enclosure The Apex enclosure provides a secure housing for the 13-inch iPad Air and features a black finish suitable for a range of commercial and public-facing installations. The enclosure provides access to the tablet display while maintaining a secure mounting arrangement.

Flexible Arm Mount The Flex Counter Top arm provides approximately 12 inches of reach and allows the mounted iPad to be positioned according to the requirements of the installation. The flexible arm supports portrait and landscape orientations, making it suitable for different viewing positions.

VESA Mounting The mounting system uses a 100 x 100 mm VESA-compatible connection, allowing the enclosure and arm assembly to be integrated with compatible mounting hardware. This provides flexibility for fixed tablet installations on suitable surfaces.

The Compulocks 159B146GUAPXB Galaxy Tab S9 Ultra 14.6in Apex Enclosure Flex Arm Mount Black combines a secure Apex enclosure with a flexible countertop mounting arm for the Samsung Galaxy Tab S9 Ultra. The enclosure holds the large 14.6-inch tablet securely while the flexible arm allows the display to be positioned for different viewing requirements. With support for portrait and landscape orientations and cable routing through the mounting arm, this system is suitable for retail counters, reception areas, kiosks, check-in points and other interactive tablet installations.

Key Features of Compulocks 159B146GUAPXB Compatible with Samsung Galaxy Tab S9 Ultra 14.6-inch
Compatible with Galaxy Tab S9 Ultra models SM-X910, SM-X916B and SM-X918U
Secure Apex metal tablet enclosure
Flexible countertop mounting arm
Supports portrait and landscape orientations
Approximately 12-inch flexible arm reach
100 x 100 mm and 75 x 75 mm VESA mounting compatibility
Supports cable routing through the mounting arm
Galaxy Tab Ultra Compatibility The Apex enclosure is compatible with the 14.6-inch Samsung Galaxy Tab Ultra range, including the Galaxy Tab S9 Ultra (2023) with model numbers SM-X910, SM-X916B and SM-X918U, the Galaxy Tab S10 Ultra (2024) with model numbers SM-X920, SM-X926B, SM-X926N and SM-X920N, and the Galaxy Tab S11 Ultra (2025) with model numbers SM-X930, SM-X936B, SM-X936N and SM-X930N. The enclosure provides a secure fit while keeping the large touchscreen accessible for interactive use.



Apex Enclosure The metal Apex enclosure provides a secure housing for the Galaxy Tab S9 Ultra and features a black finish suitable for commercial and public-facing installations. The enclosure allows the tablet to remain accessible for touchscreen interaction while secured within the mounting system.

Flexible Arm Mount The Flex Counter Top arm provides approximately 12 inches of reach and allows the mounted tablet to be positioned according to the requirements of the installation. Its flexible construction supports portrait and landscape orientations, providing different viewing positions for users.

VESA Mounting The mounting system supports 100 x 100 mm and 75 x 75 mm VESA configurations, allowing the enclosure and arm assembly to be integrated with compatible mounting hardware. This provides flexibility for fixed tablet installations on suitable countertop surfaces.

Cable Management The Flex Counter Top mounting system provides cable routing through the arm, helping charging and connection cables pass towards the mounting surface without running externally along the arm. This keeps the tablet connection routed through the mounting assembly.

The Compulocks 159B124GAPXB Galaxy Tab S9+/S9FE+ 12.4in Apex Enclosure Flex Arm Mount Black combines a secure metal Apex enclosure with a flexible arm for mounting compatible Samsung Galaxy Tab devices on countertops or suitable flat surfaces. The enclosure supports the 12.4-inch Galaxy Tab S9+ and S9 FE+ while keeping the front and rear cameras and sensors accessible. The flexible arm provides adjustable positioning for portrait or landscape use, making the mount suitable for interactive displays, retail counters, reception areas and self-service applications.

Key Features of Compulocks 159B124GAPXB Compatible with Samsung Galaxy Tab S9+ and S9 FE+
Supports 12.4-inch Galaxy Tab models
Secure Apex metal enclosure with black finish
Quick-keyed access to the tablet enclosure
Flexible extending arm for adjustable positioning
Supports portrait and landscape tablet orientations
100 x 100 mm and 75 x 75 mm VESA compatibility
Front and rear cameras and sensors remain accessible
Allows charging while the tablet is mounted
Galaxy Tab Compatibility The Apex enclosure is made for compatible 12.4-inch Samsung Galaxy Tab models, including the Galaxy Tab S9+ and Galaxy Tab S9 FE+. The S9 FE+ version uses model numbers SM-X610 and SM-X616B, while the S9+ uses SM-X810 and SM-X816B. The enclosure keeps the touchscreen available for interactive applications while securing the tablet in position.

Apex Enclosure The metal Apex enclosure provides a secure housing for the tablet and uses quick-keyed access for convenient installation and removal. The enclosure leaves the front and rear cameras and sensors exposed, allowing the tablet to retain its normal device functionality while mounted.

Flexible Arm Positioning The extending flexible arm provides adjustable positioning for the mounted tablet and can be used where countertop space is restricted or where the display needs to be positioned around a corner. The arm supports both portrait and landscape orientations for different viewing requirements.

VESA Mounting The mounting system supports 100 x 100 mm and 75 x 75 mm VESA mounting configurations. This provides flexibility when installing the tablet enclosure on compatible mounting surfaces or integrating it with other VESA-compatible mounting equipment.

The Compulocks 660REACH provides an articulating monitor arm for mounting compatible displays and VESA equipment in desktop and commercial environments. The silver Reach arm supports screens up to 24 inches and 10 lb (4.5 kg), with multiple adjustment points for positioning the display to suit different viewing requirements.

Key Features of Compulocks 660REACH VESA compatible with 75 x 75 mm and 100 x 100 mm mounting patterns
Supports monitors and screens up to 24 inches
Maximum load capacity of 10 lb / 4.5 kg
Articulating arm with multiple adjustment points
Tilt adjustment from +75° to -30°
Swivel adjustment up to ±90°
Pivot adjustment up to ±90°
Up to 340 mm of lift adjustment
Integrated cable management
VESA Monitor Compatibility The Reach arm supports standard 75 x 75 mm and 100 x 100 mm VESA mounting patterns. This allows it to accommodate compatible computer monitors, screens and Compulocks enclosures that use either mounting arrangement.

Articulating Adjustment The articulated arm provides a broad range of movement for positioning the mounted screen. The arm offers tilt from +75° to -30°, while swivel and pivot adjustment provide up to ±90° movement for flexible screen positioning.

Load Capacity The Reach arm supports displays measuring up to 24 inches and weighing up to 10 lb (4.5 kg). The mounting system is suitable for compatible monitors and other VESA equipment within these limits.

Cable Management Integrated cable management provides a route for monitor and peripheral cables along the arm. This helps keep connected cables routed with the mount while allowing the display to move through its available range of adjustment.

The Compulocks 660REACH209SWLB combines a secure Swell enclosure with a Reach articulating arm to provide adjustable mounting for compatible iPad models. The enclosure uses tamper-proof side screws to secure the tablet, while the articulated arm allows the screen to be tilted, panned and repositioned for convenient viewing. The mounting system can be secured to a desk or countertop, with a wall mounting option available using an additional bracket.

Key Features of Compulocks 660REACH209SWLB Compatible with iPad 10th generation 10.9-inch (2022)
Compatible with iPad 11th generation A16 11-inch (2025)
Swell enclosure with secure tamper-proof side screws
Reach articulating arm with tilt, pan and swing adjustment
Arm extends up to 23.2 inches (59cm)
100x100mm and 75x75mm VESA mounting patterns
Integrated cable management
Supports continuous charging while mounted
iPad Compatibility The Swell enclosure supports the iPad 10th generation with its 10.9-inch display, including models A2757 and A2777. Current Compulocks documentation also lists the iPad 11th generation A16 with its 11-inch display, covering models A3354, A3355 and A3356.

Swell Enclosure The Swell enclosure provides a close-fitting frame around the iPad with a minimal profile. Tamper-proof side screws help keep the tablet secured inside the enclosure, making it suitable for locations where the device needs to remain mounted and protected from unauthorised removal.

Reach Articulating Arm The Reach arm provides adjustable positioning through tilt, pan and swing movement. It extends up to 23.2 inches (59cm), allowing the mounted iPad to be moved closer to the user or positioned at a suitable viewing angle for interactive applications and work areas.

Cable Management and Charging Integrated cable management provides a route for charging cables through the mounting system. The enclosure and arm arrangement supports continuous charging while the iPad remains secured in position.

Mounting Options The Reach arm can be secured to a desk or countertop using its clamp base, while an additional wall bracket can be used for wall installation. The enclosure supports 100x100mm and 75x75mm VESA mounting patterns, providing flexibility when positioning the tablet.

The Compulocks 660REACH209SWLW combines a Swell enclosure with a Reach articulating arm to provide secure, adjustable mounting for compatible iPad models. The white Swell enclosure uses tamper-proof side screws to hold the tablet securely, while the articulated arm provides tilt, pan and swing adjustment for flexible positioning. The mounting system can be secured to a desk or countertop, with wall mounting available using an additional bracket.

Key Features of Compulocks 660REACH209SWLW Compatible with iPad 10th generation 10.9-inch (2022)
Compatible with iPad 11th generation A16 11-inch (2025)
Swell enclosure with tamper-proof side screws
Reach articulating arm with tilt, pan and swing adjustment
Arm extends up to 23.2 inches (59cm)
100x100mm and 75x75mm VESA mounting patterns
Integrated cable management
Charging cable access for continuous power
iPad Compatibility The Swell enclosure supports the iPad 10th generation with its 10.9-inch display, including models A2757 and A2777. Current Compulocks documentation also lists compatibility with the iPad 11th generation A16 with its 11-inch display, covering models A3354, A3355 and A3356.

Swell Enclosure The Swell enclosure features a metal frame with a close-fitting profile around the iPad. Tamper-proof side screws help secure the tablet within the enclosure, while exposed front and rear cameras and sensors allow the device to retain key functionality when mounted.

Reach Articulating Arm The Reach arm provides adjustable positioning through tilt, pan and swing movement. It extends up to 23.2 inches (59cm), allowing the mounted iPad to be repositioned for different users and viewing angles.

Cable Management and Charging The mounting system provides cable management and charging cable access, allowing the iPad to remain connected while secured in the enclosure. This helps keep the charging connection routed through the mounting arrangement.

The Compulocks 660REACH105GA8SB combines a secure Space enclosure for the Samsung Galaxy Tab A8 10.5-inch tablet with an adjustable Reach articulating arm, providing flexible positioning for desktop, countertop and wall-mounted installations. The enclosure protects the tablet while keeping key functions accessible, while the articulating arm allows the screen to be repositioned for comfortable viewing and interaction.

Key Features of Compulocks 660REACH105GA8SB Compatible with Samsung Galaxy Tab A8 10.5-inch tablet
Supports Galaxy Tab A8 models SM-X200 and SM-X205
Space enclosure with high-grade aluminium construction
Key-lockable enclosure for tablet security
Reach articulating arm with adjustable positioning
Arm extends up to 23.6 inches (60 cm)
Supports tilt, pan and swing movement
100 x 100 mm and 75 x 75 mm VESA compatible mounting
Integrated cable management through the arm
Allows access to the tablet's cameras, sensors and ports
Space Enclosure The Space enclosure uses high-grade aluminium to hold the Galaxy Tab A8 securely while maintaining access to important tablet functions. Its enclosed format provides added protection for the tablet, with a keyed locking mechanism helping to restrict unauthorised removal.

Reach Articulating Arm The Reach arm provides tilt, pan and swing movement, allowing the Galaxy Tab A8 to be positioned at different viewing angles. The arm extends up to 23.6 inches (60 cm), giving users a wide range of movement for interactive tablet applications.

Cable Management Integrated cable management helps route the tablet's charging cable through the arm, keeping the installation organised while allowing the Galaxy Tab A8 to remain connected to power during use.

Mounting Options The Reach arm supports flexible installation for desks and countertops, with options for wall mounting when required. VESA compatibility with 75 x 75 mm and 100 x 100 mm mounting patterns provides further flexibility when integrating the arm into different mounting environments.

The Compulocks 660REACH830IPMSB combines a Space enclosure for the iPad mini with a Reach articulating arm, providing a secure and adjustable mounting arrangement for tablet installations. The enclosure holds the iPad mini securely while allowing access to key device features, and the articulated arm provides flexible positioning through tilt, pan and swing adjustment. The mounting system can be installed on a desk or countertop, with a wall mounting option available using an additional bracket.

Key Features of Compulocks 660REACH830IPMSB Compatible with iPad mini 6th generation 8.3-inch (2021)
Compatible with iPad mini 7th generation A17 Pro 8.3-inch (2024)
Space enclosure with secure locking mechanism
Reach articulating arm with tilt, pan and swing adjustment
Arm extends up to 23.2 inches (59cm)
100x100mm and 75x75mm VESA mounting patterns
Integrated cable management
Supports charging while mounted
iPad mini Compatibility The Space enclosure supports the iPad mini 6th generation with its 8.3-inch display, including model A2568. Current Compulocks documentation also lists the iPad mini 7th generation with the A17 Pro chip and 8.3-inch display, covering models A2993, A2995 and A2996.

Space Enclosure The Space enclosure provides a secure frame for the iPad mini and uses a locking mechanism to help prevent unauthorised removal. The enclosure has a compact form suited to the 8.3-inch tablet and provides access around the device for normal operation.

Reach Articulating Arm The Reach arm provides tilt, pan and swing adjustment, allowing the mounted iPad mini to be repositioned for different viewing angles. The arm extends up to 23.2 inches (59cm), providing additional reach from the mounting point.

Cable Management and Charging Integrated cable management helps route the charging connection through the mounting arrangement. The enclosure and arm allow the iPad mini to remain connected to power while secured in position.

Mounting Options The Reach arm can be secured to a desk or countertop using its no-screw clamp base. A wall bracket can also be used for wall installation, while 100x100mm and 75x75mm VESA mounting patterns provide flexible attachment options for the enclosure.

The Compulocks 660REACH102IPDSB combines a secure Space enclosure for 10.2-inch iPad models with an adjustable Reach articulating arm, providing a flexible mounting option for desktop, countertop and wall installations. The enclosure holds the iPad securely while keeping the camera, sensors and speakers accessible, and the articulating arm allows the display to be positioned for convenient viewing and interaction.

Key Features of Compulocks 660REACH102IPDSB Compatible with iPad 7th, 8th and 9th generation 10.2-inch models
Space enclosure with rounded edges and open corners
High-grade aluminium enclosure construction
Key-lockable enclosure for added device security
Articulating Reach arm with tilt, pan and swing movement
Arm extends up to 23.2 inches (59 cm)
100 x 100 mm VESA mounting compatibility
Integrated cable management through the arm
Camera, sensors and speakers remain accessible
iPad Compatibility The Space enclosure is made for 10.2-inch iPad models from the 7th, 8th and 9th generations. Supported models include A2197 and A2200 for the 7th generation, A2270, A2428, A2429 and A2430 for the 8th generation, and A2602, A2603 and A2604 for the 9th generation.

Space Enclosure The Space enclosure uses high-grade aluminium and features rounded edges with open corners to provide access to the iPad's cameras, sensors and speakers. A keyed locking mechanism helps secure the tablet in place while allowing authorised access when required.

Articulating Reach Arm The Reach arm provides tilt, pan and swing movement for flexible screen positioning. It extends up to 23.2 inches (59 cm), allowing the mounted iPad to be moved closer to the user or repositioned for different viewing angles. The arm supports 100 x 100 mm VESA mounting.

Cable Management and Charging Integrated cable management keeps the charging cable routed through the arm, helping maintain an organised installation. The enclosure provides access for connecting power so the iPad can remain charged while mounted.

Mounting Options The articulating arm can be installed on a desk or countertop, with mounting options also available for through-desk and wall installations. This provides flexibility for point-of-sale, information display, reception and interactive tablet applications.

The Compulocks 660REACH11APXB combines an Apex enclosure for the 11-inch iPad Air M2 with a Reach articulating arm, providing a secure and adjustable mounting option for desks, countertops and walls. The metal enclosure keeps the tablet firmly positioned while allowing access to the front and rear cameras and sensors, while the articulated arm provides flexible screen positioning for interactive use.

Key Features of Compulocks 660REACH11APXB Compatible with iPad Air M2 11-inch (2024)
Quick-keyed access for secure tablet mounting
Exposed front and rear cameras and sensors
Reach articulating arm with tilt and pan adjustment
Arm extends up to 23.6 inches (60 cm)
75 x 75 mm and 100 x 100 mm VESA mounting support
Integrated cable management for continuous charging
iPad Air Compatibility The Apex enclosure supports 11-inch iPad Air models across the M2, M3 and M4 generations. Compatible M2 models from 2024 are A2902, A2903 and A2904, while the 2025 M3 models are A3266, A3267 and A3270. The enclosure also supports the 2026 M4 models A3460, A3463 and A3459.

Apex Enclosure The Apex enclosure features a metal frame with quick-keyed access for securing the iPad Air. The enclosure leaves the tablet's cameras and sensors exposed, helping maintain normal device functionality while the tablet is mounted. Its construction provides a secure enclosure for installations where controlled tablet access is required.

Reach Articulating Arm The Reach arm provides adjustable positioning with tilt and pan movement, allowing the iPad Air screen to be positioned for different users and viewing angles. The arm extends up to 23.6 inches (60 cm), providing a broad range of movement from its mounting point.

Cable Management Integrated cable management allows the charging cable to be routed through the mounting arm, helping keep wires organised. The setup supports continuous charging while the iPad remains secured in the enclosure.

Mounting Flexibility The Reach arm can be secured to a desk or countertop using the available mounting options, while a wall bracket can be used for wall installations. Support for 75 x 75 mm and 100 x 100 mm VESA patterns provides additional mounting flexibility for different installation requirements.

The Compulocks 660REACH11PAPX4B combines an Apex enclosure for the 11-inch iPad Pro with a Reach articulating arm, providing a secure and adjustable mounting option for desks, countertops and walls. The metal enclosure keeps the tablet securely positioned while maintaining access to the cameras and sensors, while the articulating arm allows the screen to be repositioned for comfortable viewing and interaction.

Key Features of Compulocks 660REACH11PAPX4B Compatible with iPad Pro M4 and M5 11-inch models
iPad Pro M4 11-inch (2024): A2836, A2837, A3006
iPad Pro M5 11-inch (2025): A3357, A3358, A3359
Quick-keyed access for secure tablet mounting
Exposed front and rear cameras and sensors
Reach articulating arm with adjustable positioning
Arm extends up to 23.6 inches (60 cm)
75 x 75 mm and 100 x 100 mm VESA mounting
Integrated cable management through the arm
Supports continuous charging while the iPad is mounted
Apex Enclosure The Apex enclosure features a sleek metal frame with quick-keyed access for securing the iPad Pro. The enclosure keeps the tablet firmly positioned while maintaining access to the front and rear cameras and sensors, helping preserve normal device functionality while mounted.

Reach Articulating Arm The Reach arm provides tilt, pan and swing movement, allowing the iPad Pro to be positioned at different viewing angles. It extends up to 23.6 inches (60 cm), giving users a broad range of movement from the mounting point.

Cable Management and Charging Integrated cable management allows the charging cable to be routed through the arm, helping keep cables organised. The mounting setup supports continuous charging while the iPad Pro remains secured in the enclosure.

Mounting Options The Reach arm can be securely mounted to a desk or countertop using the available mounting options, while a wall bracket can be used for wall installations. Support for 75 x 75 mm and 100 x 100 mm VESA patterns provides flexibility for different mounting requirements.

The Compulocks 660REACH13PAPX4B combines an Apex enclosure for the 13-inch iPad Pro with a Reach articulating arm, providing a secure and adjustable mounting option for desks, countertops and wall installations. The metal enclosure holds the tablet securely, while the articulated arm provides flexible positioning for viewing and interaction.

Key Features of Compulocks 660REACH13PAPX4B Compatible with iPad Pro M4 13-inch (2024) and M5 13-inch (2025)
Key-lockable enclosure for secure tablet mounting
Reach articulating arm with tilt, pan and swing movement
Arm extends up to 23.6 inches (60 cm)
75 x 75 mm and 100 x 100 mm VESA mounting support
Integrated cable management through the arm
Supports continuous charging while the iPad is mounted
Desk and countertop mounting support
iPad Pro Compatibility The Apex enclosure supports 13-inch iPad Pro models from the M4 and M5 generations. Compatible M4 models from 2024 are A2925, A2926 and A3007. The enclosure also supports the 2025 M5 models A3360, A3361 and A3362.

Apex Enclosure The Apex enclosure uses high-grade aluminium and provides a secure frame around the iPad Pro. Its keyed access mechanism helps restrict unauthorised removal.

Reach Articulating Arm The Reach arm provides tilt, pan and swing movement, allowing the iPad Pro to be positioned at different viewing angles. It extends up to 23.6 inches (60 cm), giving users a broad range of movement from the mounting point.

Cable Management and Charging Integrated cable management allows the charging cable to be routed through the articulating arm, helping keep cables organised. The mounting arrangement supports continuous charging while the iPad Pro remains secured in the enclosure.

Mounting Options The Reach arm can be secured to a desk or countertop, while an additional wall bracket can be used for wall installations. Support for 75 x 75 mm and 100 x 100 mm VESA mounting patterns provides flexibility for different installation requirements.

The Compulocks 660REACH13APXB combines an Apex enclosure for 13-inch iPad Air models with a Reach articulating arm, providing a secure and adjustable mounting option for desks, countertops and walls. The aluminium enclosure holds the tablet securely while keeping key functions accessible, while the articulated arm allows the screen to be repositioned for different viewing angles and interactive applications.

Key Features of Compulocks 660REACH13APXB Compatible with 13-inch iPad Air M2, M3 and M4 models
Key-lockable enclosure for secure tablet mounting
Reach articulating arm with tilt, pan and swing movement
Arm extends up to 23.6 inches (60 cm)
75 x 75 mm and 100 x 100 mm VESA mounting support
Integrated cable management through the arm
Supports continuous charging while the iPad is mounted
Supports desk, countertop and wall mounting
iPad Air Compatibility The Apex enclosure supports 13-inch iPad Air models across the M2, M3 and M4 generations. Compatible M2 models from 2024 are A2898, A2899 and A2900. The 2025 M3 models are A3268, A3269 and A3271, while the 2026 M4 models are A3462, A3464 and A3461.

Apex Enclosure The Apex enclosure uses high-grade aluminium and provides a secure frame around the iPad Air. A keyed locking mechanism helps prevent unauthorised removal while maintaining access to the tablet's cameras, sensors and other essential functions.

Reach Articulating Arm The Reach arm provides tilt, pan and swing movement for flexible screen positioning. It extends up to 23.6 inches (60 cm), allowing the mounted iPad Air to be moved and positioned according to the user's viewing or interaction requirements.

Cable Management and Charging Integrated cable management allows the charging cable to be routed through the articulating arm, helping keep cables organised. The enclosure and arm arrangement supports continuous charging while the iPad Air remains secured in place.

Mounting Options The Reach arm can be secured to a desk or countertop, while an additional wall bracket can be used for wall installations. The 75 x 75 mm and 100 x 100 mm VESA mounting patterns provide flexibility when integrating the arm into different mounting setups.

The Compulocks 660REACH209IPDSB combines a secure Space enclosure with a Reach articulating arm to provide adjustable mounting for compatible iPad models. The enclosure keeps the tablet securely positioned, while the articulated arm allows the screen to tilt, pan and swing into a suitable viewing position. It can be mounted to a desk or countertop, with a wall mounting option available for installations requiring a fixed support point.

Key Features of Compulocks 660REACH209IPDSB Space enclosure with high-grade aluminium construction
Quick Lock and Unlock keyed security
Rounded edges and open corners
Reach articulating arm with tilt, pan and swing adjustment
Arm extends up to 23.6 inches (60cm)
100x100mm VESA mounting pattern
Integrated cable management
Supports continuous charging while mounted
iPad Compatibility The Space enclosure supports the 10th generation iPad with its 10.9-inch display, including models A2757 and A2777. Current Compulocks documentation also lists compatibility with the 11th generation A16 iPad with an 11-inch display, covering models A3354, A3355 and A3356.

Space Enclosure The Space enclosure uses high-grade aluminium and features rounded edges with open corners around the tablet. A Quick Lock and Unlock keyed mechanism helps keep the iPad secured within the enclosure, while the open areas provide access around the tablet for everyday use.

Reach Articulating Arm The Reach arm provides tilt, pan and swing adjustment for positioning the iPad at a comfortable viewing angle. The arm extends up to 23.6 inches (60cm) and uses a 100x100mm VESA mounting pattern, giving the tablet a flexible position for interactive displays, counters and work areas.

Cable Management and Charging Integrated cable management helps route the charging cable through the mounting setup, allowing the iPad to remain connected while installed. This keeps the cable routed through the arm and enclosure area rather than hanging freely around the mounting point.

The Compulocks 159W13APXW iPad Air M2 & M3 13 Inch Apex Enclosure Flex Arm Mount in white combines a lockable aluminium tablet enclosure with an adjustable Flex Arm for convenient positioning on desks, counters and walls. The enclosure accommodates the 13-inch iPad Air M2 and M3 generations while keeping the front and rear cameras and sensors accessible. Its keyed locking mechanism helps keep the tablet secured, and the arm provides flexible positioning for interactive displays, information points and work areas.

Key Features of Compulocks 159W13APXW White Apex enclosure with Flex Arm mount
Compatible with 13-inch iPad Air M2 models from 2024
Compatible with 13-inch iPad Air M3 models from 2025
Lockable high-grade aluminium enclosure
Keyed access with 2 enclosure keys
Flexible extending arm for adjustable tablet positioning
100 x 100 mm VESA mounting pattern
Counter, desk and wall mounting options
Through-arm cable management for cables up to 10 mm in diameter
Front and rear cameras and sensors remain exposed
Direct access for charging cables
Apex Security Enclosure The Apex enclosure holds the compatible 13-inch iPad Air within a dedicated aluminium frame and uses a keyed locking mechanism to help restrict unauthorised removal. The open areas around the tablet allow the cameras and sensors to remain available for normal operation while the iPad is mounted.

Flexible Arm Positioning The Flex Arm provides adjustable positioning for the mounted tablet, making it suitable for installations where the screen needs to be moved into a convenient viewing or interaction angle. Its extending form works well across desks, counters and other areas where a fixed enclosure may offer less flexibility.

VESA Mounting Interface A 100 x 100 mm VESA mounting pattern is incorporated into the enclosure, allowing it to be paired with compatible mounting equipment. The Flex Arm arrangement can be used for counter, desk and wall installations, providing several options for positioning the iPad Air.

Integrated Cable Routing The Flex Arm includes through-arm cable management for cables up to 10 mm in diameter. This provides a practical route for charging connections while keeping the cable closer to the mounting structure. Direct access to the iPad charging connection is retained when the tablet is secured in the enclosure.

The Compulocks 159B580APXB Surface Pro 8-11 Apex Enclosure Flex Arm Mount Black combines a keyed aluminium enclosure with an adjustable Flex Arm to provide a secure and versatile mounting arrangement for compatible Microsoft Surface Pro tablets. The flexible arm can be positioned for convenient viewing and interaction, while the enclosure keeps the tablet securely held and leaves the front and rear cameras and sensors exposed.

Key Features of Compulocks 159B580APXB Apex enclosure with flexible Flex Arm mount
Compatible with Microsoft Surface Pro 8, 9, 10 and 11 13-inch models
Metal frame construction
Keyed locking mechanism
2 keys included
Extending flexible arm for adjustable positioning
Wall and countertop mounting capability
Through-arm cable management for cables up to 10 mm in diameter
Front and rear cameras and sensors remain exposed
Charging cable access while the Surface Pro remains mounted
Compatible with security cable locks
Apex Security Enclosure The Apex enclosure holds the compatible Surface Pro securely within a dedicated metal frame and uses keyed access to help prevent unauthorised removal. The enclosure leaves the front and rear cameras and sensors exposed, allowing these features to remain available while the tablet is mounted.

Flexible Tablet Positioning The extending Flex Arm provides adjustable positioning for the Surface Pro, making it suitable for interactive displays, reception points, counters and work areas. Its bendable construction is particularly useful where the tablet needs to be positioned around corners or where available counter space is limited.

VESA Mounting Support The mounting arrangement supports both 75 x 75 mm and 100 x 100 mm VESA patterns, providing compatibility with suitable mounting hardware. The assembly can be used for countertop and wall-mounted installations, giving users flexibility when selecting the mounting location.

Integrated Cable Management The Flex Arm incorporates through-arm cable management for cables up to 10 mm in diameter. This provides a practical route for charging and connection cables while helping keep the mounting area more orderly. Charging access remains available without removing the Surface Pro from its enclosure.

The Compulocks 159B209APXB iPad 10th-11th (A16) Gen Apex Enclosure Flex Arm Mount - Black combines a secure Apex enclosure with a flexible arm that allows the mounted iPad to be positioned where it is most convenient for interaction. The enclosure supports the 10th generation 10.9-inch iPad and 11th generation 11-inch A16 model, with a keyed locking mechanism helping keep the tablet secured.

Key Features of Compulocks 159B209APXB Apex secured enclosure with Flex Arm mount
Compatible with iPad 10th generation 10.9-inch models A2757 and A2777
Compatible with iPad 11th generation A16 11-inch models A3354, A3355 and A3356
Keyed locking enclosure
2 keys included
Flexible arm for adjustable tablet positioning
Countertop and wall mounting options
Through-arm cable management
Supports cables up to 10 mm in diameter through the arm
Front and rear cameras and sensors remain accessible
Charging access while the iPad remains mounted
Secure Apex Enclosure The Apex enclosure holds the compatible iPad within a dedicated frame and uses keyed access to help restrict unauthorised removal. Its construction leaves important areas of the tablet accessible, allowing users to continue operating the touchscreen and using the available cameras and sensors while the iPad is mounted.

Flexible Arm Positioning The Flex Arm gives the mounted tablet a more adaptable position than a fixed bracket. It can be adjusted to suit different viewing and interaction angles, making the assembly useful for reception points, information displays, service counters and other areas where users need convenient access to the screen.

Multiple Mounting Options The Flex Arm can be installed on suitable countertop or wall surfaces, providing flexibility when selecting where the iPad will be positioned. The mounting arrangement is also compatible with a 100 x 100 mm VESA pattern, allowing suitable mounting hardware to be incorporated into the installation.

Practical Cable Routing Cables can be routed through the Flex Arm, helping keep the charging connection close to the mounting structure. The arm accommodates cables up to 10 mm in diameter, while the enclosure provides access to the iPad's charging connection without requiring the tablet to be removed.

10th and 11th Generation iPad Support The enclosure supports the 2022 iPad 10th generation 10.9-inch models A2757 and A2777, as well as the 2025 iPad 11th generation with A16 processor in models A3354, A3355 and A3356. Compulocks lists the black Apex enclosure at approximately 2.39 lb, making the enclosure suitable for mounting as part of a fixed tablet installation.